SH Series
CENTRIFUGAL ELECTRIC PUMPS MADE OF AISI 316 STAINLESS STEEL
IN COMPLIANCE WITH EN 733, EQUIPPED WITH IE2/IE3 MOTORS
COMPLYING WITH REGULATION (EC) no. 640/2009
Cod. 191012821 R
ev
.B Ed.06/2012
Rev
ev.B
SH SERIES
HYDRA
ULIC PERFORMANCE RANGE A
T 60 Hz
HYDRAULIC
AT
CONTENTS
5
6
8
9
14
15
24
26
28
51
75
91
95
Specifications ......................................................................................................................................
Motors ..........................................................................................................................................
Accessories ...................................................................................................................................
Centrifugal
electric pumps
made of
AISI 316
stainless steel
in compliance
with EN 733
MARKET SECTORS
The Lowara SH series pumps are used for water and clean
liquid circulation in heating, ventilating and air
conditioning systems, and for pressure boosting in
industrial applications.
SH Series
60 Hz
Temperature of pumped
liquid
liquid:
Standard -10C to +120C.
Special versions available on request.
Maximum working pressure
pressure:
12 bar (PN 12).
MOTOR
SPECIFICA
TIONS
SPECIFICATIONS
PUMP
The SH series consists of single-stage
centrifugal pumps made of
pressed AISI 316 stainless steel.
The idraulic sizes and diameters of the
suction and delivery ports are in
compliance with EN 733 standards
(ex DIN 24255).
Flange dimensions in compliance
with EN 1092-1.
Available sizes: DN 25 to DN 80.
Anti-clockwise rotation when facing
pumps suction port.
Back pull-out design.
APPLICA
TION RANGE
APPLICATION
Delivery
Delivery:
up to 240 m3/h, 2 poles.
up to 145 m3/h, 4 poles.
Head
Head:
up to 120 m, 2 poles.
up to 30 m, 4 poles.
CONSTRUCTION
CHARACTERISTIC
S
CHARACTERISTICS
Stainless steel centrifugal pump with end suction
and radial discharge ports.
Pump body made of AISI 316L stainless steel.
Flanges in compliance with EN 1092-1 (ex UNI 2236
and DIN 2533).
Back pull-out design (impeller, bracket and motor
can be extracted without disconnecting the pump
body from the piping).
Closed impeller made of AISI 316L stainless steel,
laser-technology welded (for sizes 25, 32, 40, 50,
65-160/75, 65-160/110A) or AISI CF8M cast
stainless steel.
Mechanical seal according to EN 12756 (ex DIN
24960).
AISI 316L stainless steel fill & drain plugs.
MOTOR-PUMP COUPLING
SHE
SHE: close-coupled by means of a bracket with
impeller keyed directly to the motor shaft extension.
SHS
SHS: with a bracket, adaptor and rigid coupling
keyed to the standard motor shaft extension.
SHF
SHF: with bracket, support, flexible coupling, and
aligning and anchoring base.
Bare shaft pump and version with spacer coupling
are also available upon request.
ACCES
SORIES ON REQUEST
ACCESSORIES
OPTIONAL FEA
TURES
FEATURES
SH SERIES
IDENTIFICA
TION CODE
IDENTIFICATION
SH
32
200
40
/_
Null or
Letter assigned by the manufacturer
Reduced impeller
6 = 60 Hz
Rated motor power (kW x 10)
Impeller nominal diameter (mm)
Discharge port nominal diameter (mm)
= 2-pole motor
4 = 4-pole motor
E = Close-coupled version
S = Version with rigid coupling, IEC standard motor
F = Version with flexible coupling, base according to EN 733
SH Series name
SHE - SHS RA
TING PLA
TE
RATING
PLATE
LEGEND
1 - Electric pump type
2 - Code
3 - Delivery range
4 - Head range
5 - Motor type
6 - Date of manufacturing and serial number
7 - Impeller diameter
8 - Minimum head
9 - Mechanical seal material identification code
10 - Speed
11 - Rated power
12 - Maximum operating temperature
13 - Maximum operating pressure
14 - O-ring material identification code
SHF RA
TING PLA
TE
RATING
PLATE
(PUMP ONL
Y)
ONLY)
SHF RA
TING PLA
TE
RATING
PLATE
(ELECTRIC PUMP)
25-125/116
25-160/156
25-160/226
25-200/306
25-200/406
25-250/556
25-250/756
25-250/1106
32-125/116
32-160/156
32-160/226
32-200/306
32-200/406
32-250/556
32-250/756
32-250/1106
40-125/156
40-125/226
40-160/306
40-160/406
40-200/556
40-200/756
40-250/926
40-250/1106A
40-250/1106
40-250/1506
50-125/306
50-125/406
50-160/556
50-160/756
50-200/926
50-200/1106A
50-200/1106
50-250/1506
50-250/1856
50-250/2206
65-160/556
65-160/756
65-160/926
65-160/1106A
65-160/1106
65-200/1506
65-200/1856
65-200/2206
65-250/3006
65-250/3706
80-160/1506
80-160/1856
80-200/2206
80-200/3006
80-200/3706
80-250/4506
80-250/5506
80-250/7506
= Available
VERSION
kW
1,1
1,5
2,2
3
4
5,5
7,5
11
1,1
1,5
2,2
3
4
5,5
7,5
11
1,5
2,2
3
4
5,5
7,5
9,2
11
11
15
3
4
5,5
7,5
9,2
11
11
15
18,5
22
5,5
7,5
9,2
11
11
15
18,5
22
30
37
15
18,5
22
30
37
45
55
75
SIZE
SHE
SHS
SHF
25-125/026
25-160/026
25-160/036
25-200/036
25-200/056
25-250/076
25-250/116
25-250/156
32-125/026
32-160/026
32-160/036
32-200/036
32-200/056
32-250/076
32-250/116
32-250/156
40-125/026
40-125/036
40-160/036
40-160/056
40-200/076
40-200/116
40-250/116
40-250/156
40-250/226
50-125/036
50-125/056
50-160/076
50-160/116
50-200/116
50-200/156
50-250/226A
50-250/226
50-250/306
65-160/076
65-160/116A
65-160/116
65-160/156
65-200/156
65-200/226
65-200/306
65-250/406
65-250/556
80-160/226A
80-160/226
80-200/306
80-200/406
80-250/556
80-250/756
80-250/1106
= Available
sh-2p60-en_b_tem
VERSION
kW
0,25
0,25
0,37
0,37
0,55
0,75
1,1
1,5
0,25
0,25
0,37
0,37
0,55
0,75
1,1
1,5
0,25
0,37
0,37
0,5
0,75
1,1
1,1
1,5
2,2
0,37
0,5
0,75
1,1
1,1
1,5
2,2
2,2
3
0,75
1,1
1,1
1,5
1,5
2,2
3
4
5,5
2,2
2,2
3
4
5,5
7,5
11
SHE4
SHS4
SHF4
sh-4p60-en_c_tem
DENOMINAZIONE MODELLI
SERIE SHE - SHE4 CON
STAFFA DI SOSTEGNO
VERSION
2 POLE
4 POLE
SHE 25-125/116
SHE 25-160/156
SHE 25-160/226
SHE 25-200/306
SHE 25-200/406
SHE 25-250/556
SHE 25-250/756
SHE 25-250/1106
SHE 32-125/116
SHE 32-160/156
SHE 32-160/226
SHE 32-200/306
SHE 32-200/406
SHE 32-250/556
SHE 32-250/756
SHE 32-250/1106
SHE 40-125/156
SHE 40-125/226
SHE 40-160/306
SHE 40-160/406
SHE 40-200/556
SHE 40-200/756
SHE 40-250/926
SHE 40-250/1106
SHE 50-125/306
SHE 50-125/406
SHE 50-160/556
SHE 50-160/756
SHE 50-200/926
SHE 50-200/1106
SHE 65-160/556
SHE 65-160/756
SHE 65-160/926
SHE 65-160/1106
SHE4 25-200/056
SHE4 25-250/076
SHE4 25-250/116
SHE4 25-250/156
SHE4 32-200/056
SHE4 32-250/076
SHE4 32-250/116
SHE4 32-250/156
SHE4 40-160/056
SHE4 40-200/076
SHE4 40-200/116
SHE4 40-250/116
SHE4 40-250/156
SHE4 40-250/226
SHE4 50-125/056
SHE4 50-160/076
SHE4 50-160/116
SHE4 50-200/116
SHE4 50-200/156
SHE4 50-250/226A
SHE4 50-250/226A
SHE4 50-250/306
SHE4 65-160/076
SHE4 65-160/116A
SHE4 65-160/116A
SHE4 65-160/156
SHE4 65-200/156
SHE4 65-200/226
SHE4 65-200/306
SHE4 65-250/406
SHE4 65-250/556
SHE4 80-160/226A
SHE4 80-160/226A
SHE4 80-200/306
SHE4 80-200/406
SHE4 80-250/556
SHE4 80-250/756
sh-she-she4-p-60-en_c_mo
MATERIALI SHE
REF.
NAME
REFERENCE STANDARDS
MATERIAL
N.
1
2
3
4
5
6
7
8
9
10
11
12
13
15
EUROPE
USA
Pump body
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Impeller 25-32-40-50-65(160)
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Impeller 65(200-250)-80
Stainless steel
Seal housing
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
Wear ring
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Counterwear ring
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
AISI 316L
Shaft extension
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Tab
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Fill/drain plugs
Mechanical seal
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
Ceramic / Carbon / FPM (standard version)
Elastomers
Adapter *
Aluminium
Adapter *
Cast iron
Galvanized steel
EN 1561-GJL-200 (JL1030)
ASTM Class 25
* For the 25/32/40-125 2/4 pole, 25/32/40-160 2/4 pole, 25/32/40-200 2/4 pole versions
AISI 316
sh_she-en_c_tm
DENOMINAZIONE MODELLI
SERIE SHE A 60Hz CON PIED
SOSTEGNO SUL MOTORE
VERSION
2 POLE
4 POLE
DENOMINAZIONE MODELL
SERIE SHE4 A 60Hz CON M
MEC 71 B5
VERSION
4 POLE
SHE4 25-125/026
SHE4 25-160/026
SHE4 25-160/036
SHE4 25-200/036
SHE4 32-125/026
SHE4 32-160/026
SHE4 32-160/036
SHE4 32-200/036
SHE4 40-125/026
SHE4 40-125/036
SHE4 40-160/036
SHE4 50-125/036
sh-she4-p-60-en_b_mo
MATERIALI SHE
REF.
NAME
REFERENCE STANDARDS
MATERIAL
N.
1
2
3
4
5
6
7
8
9
10
11
12
13
15
EUROPE
USA
Pump body
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Impeller 25-32-40-50-65(160)
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Impeller 65(200-250)-80
Stainless steel
Seal housing
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
Wear ring
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Counterwear ring
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
AISI 316L
Shaft extension
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Tab
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Fill/drain plugs
Mechanical seal
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
Ceramic / Carbon / FPM (standard version)
Elastomers
Adapter *
Aluminium
Adapter *
Cast iron
Galvanized steel
EN 1561-GJL-200 (JL1030)
ASTM Class 25
* For the 25/32/40-125 2/4 pole, 25/32/40-160 2/4 pole, 25/32/40-200 2/4 pole versions
AISI 316
sh_she-en_c_tm
10
DENOMINAZIONE MODELLI
SERIE SHS - SHS4 A 60Hz C
STAFFA DI SOSTEGNO
VERSION
2 POLE
4 POLE
SHS 25-125/116
SHS 25-160/156
SHS 25-160/226
SHS 25-200/306
SHS 25-200/406
SHS 25-250/556
SHS 25-250/756
SHS 32-125/116
SHS 32-160/156
SHS 32-160/226
SHS 32-200/306
SHS 32-200/406
SHS 32-250/556
SHS 32-250/756
SHS 40-125/156
SHS 40-125/226
SHS 40-160/306
SHS 40-160/406
SHS 40-200/556
SHS 40-200/756
SHS 50-125/306
SHS 50-125/406
SHS 50-160/556
SHS 50-160/756
SHS 65-160/556
SHS 65-160/756
SHS4 25-250/076
SHS4 25-250/116
SHS4 25-250/156
SHS4 32-250/076
SHS4 32-250/116
SHS4 32-250/156
SHS4 40-200/076
SHS4 40-200/116
SHS4 40-250/116
SHS4 40-250/156
SHS4 40-250/226
SHS4 50-160/076
SHS4 50-160/116
SHS4 50-200/116
SHS4 50-200/156
SHS4 50-250/226A
SHS4 50-250/226
SHS4 50-250/306
SHS4 65-160/076
SHS4 65-160/116A
SHS4 65-160/116
SHS4 65-160/156
SHS4 65-200/156
SHS4 65-200/226
SHS4 65-200/306
SHS4 65-250/406
SHS4 65-250/556
SHS4 80-160/226A
SHS4 80-160/226
SHS4 80-200/306
SHS4 80-200/406
SHS4 80-250/556
SHS4 80-250/756
MATERIALI SHS
REF.
NAME
sh-shs-shs4-p-60-en_c_mo
REFERENCE STANDARDS
MATERIAL
N.
1
2
3
4
5
7
8
9
10
11
12
13
14
15
EUROPE
USA
Pump body
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Impeller 25-32-40-50-65(160)
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Impeller 65(200-250)-80
Stainless steel
Seal housing
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
Wear ring
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Counterwear ring
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Tab
Acciaio inox
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Fill/drain plugs
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Mechanical seal
Elastomers
AISI 316L
Adapter *
Aluminium
Adapter
Cast iron
EN 1561-GJL-200 (JL1030)
ASTM Class 25
Cast iron
Galvanized steel
EN 1561-GJL-200 (JL1030)
ASTM Class 25
* For the 25/32/40-125 2/4 pole, 25/32/40-160 2/4 pole, 25/32/40-200 2/4 pole versions
sh_shs-en_c_tm
11
SHS SERIES
LIST OF MODELS AND T
ABLE OF MA
TERIALS
TABLE
MATERIALS
DENOMINAZIONE MODELLI
SERIE SHS A 60Hz CON PIE
SOSTEGNO SUL MOTORE
VERSION
2 POLE
4 POLE
MATERIALI SHS
REF.
NAME
REFERENCE STANDARDS
MATERIAL
N.
1
2
3
4
5
7
8
9
10
11
12
13
14
15
EUROPE
USA
Pump body
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Impeller 25-32-40-50-65(160)
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Impeller 65(200-250)-80
Stainless steel
Seal housing
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
Wear ring
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Counterwear ring
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Tab
Acciaio inox
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Fill/drain plugs
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Mechanical seal
Elastomers
AISI 316L
Adapter *
Aluminium
Adapter
Cast iron
EN 1561-GJL-200 (JL1030)
ASTM Class 25
Cast iron
Galvanized steel
EN 1561-GJL-200 (JL1030)
ASTM Class 25
* For the 25/32/40-125 2/4 pole, 25/32/40-160 2/4 pole, 25/32/40-200 2/4 pole versions
sh_shs-en_c_tm
12
VERSION
SHF 25-125
SHF 25-160
SHF 25-200
SHF 25-250
SHF 32-125
SHF 32-160
SHF 32-200
SHF 32-250
SHF 40-125
SHF 40-160
SHF 40-200
SHF 40-250
SHF 50-125
SHF 50-160
SHF 50-200
SHF 50-250
SHF 65-160
SHF 65-200
SHF 65-250
SHF80-160
SHF 80-200
SHF 80-250
sh-shf-p-60-en_b_mo
MATERIALI SHF
REF.
NAME
REFERENCE STANDARDS
MATERIAL
N.
1
2
3
4
5
6
8
9
10
11
12
13
14
15
EUROPE
USA
Pump body
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Impeller 25-32-40-50-65(160)
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Impeller 65(200-250)-80
Stainless steel
Seal housing
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
Wear ring
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Counterwear ring
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Shaft extension
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Tab
Stainless steel
EN 10088-1-X2CrNiMo17-12-2 (1.4404)
AISI 316L
Fill/drain plugs
Stainless steel
EN 10088-1-X5CrNiMo17-12-2 (1.4401)
AISI 316
Mechanical seal
Elastomers
AISI 316L
Adapter *
Aluminium
Adapter
Cast iron
EN 1561-GJL-200 (JL1030)
ASTM Class 25
Cast iron
Galvanized steel
EN 1561-GJL-200 (JL1030)
ASTM Class 25
* For the 25/32/40-125 2/4 pole, 25/32/40-160 2/4 pole, 25/32/40-200 2/4 pole versions
sh_shf-en_c_tm
13
FIG. 2 (**)
LIST OF MA
TERIALS
MATERIALS
POSITION 1 - 2
POSITION 3
E
V
POSITION 4 - 5
: EPDM
: FPM
: AISI 316
sh_ten-mec-en_a_tm
SEAL TYPES
TYPE
ROTATING ASSEMBLY
FIXED ASSEMBLY
VB V G G
Q1 B V G G
Q1 Q1 V G G
VB E G G
Q1 B E G G
Q1 Q1 E G G
Q1
Q1
V
Q1
Q1
POSITION
3
ELASTOMERS
TEMPERATURE
4
SPRINGS
OTHER COMPONENTS
( C )
-10 +120
G
G
G
G
G
-10
-10
-30
-30
-30
+120
+120
+120
+120
+120
sh_tipi-ten-mec-en_a_tc
14
1,1
1,5
2,2
SM90RB14S/1116
SM90RB14S/1156
PLM90B14S/1226
90R
90R
90
Construction
Design
MOTOR TYPE
kW
SPECIAL
PN
IEC SIZE*
SHE SERIES
MOTORI MONOFASE PER SERIE SHE 60 Hz, 2 poli
SINGLE-PHASE MOTORS A
T 60 Hz, 2 POLES
AT
INPUT
CAPACITOR
CURRENT
In (A)
Tn
220-230 V
6,94-6,89
9,28-9,35
12,3-11,7
30
40
60
450
450
450
min
ls / ln
cos
Nm
Ts/Tn
Tm/Tn
3435
3455
3455
4,54
4,91
4,99
74,2
76,3
83,4
0,97
0,96
0,98
3,06
4,14
6,08
0,62
0,49
0,54
2,03
2,19
2,06
-1
she-motm-2p60-en_c_te
15
Efficiency N
%
400 V
Y 400 V
Y 660 V
Y 690 V
IE
kW
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
1,1
1,5
2,2
3
4
5,5
7,5
9,2
11
15
18,5
22
85,6
87,2
85,5
87,8
87,5
88,5
89,5
89,5
90,2
90,2
91,0
91,0
85,0
87,0
85,5
88,0
87,5
88,5
89,5
89,5
90,2
90,2
91,0
91,0
82,1
84,6
84,5
86,0
86,8
88,5
88,5
89,5
89,7
90,2
91,0
91,0
85,6
87,2
85,5
87,8
87,5
88,5
89,5
89,5
90,2
90,2
91,0
91,0
85,0
87,0
85,5
88,0
87,5
88,5
89,5
89,5
90,2
90,2
91,0
91,0
82,1
84,6
84,5
86,0
86,8
88,5
88,5
89,5
89,7
90,2
91,0
91,0
85,6
87,2
85,5
87,8
87,5
88,5
89,5
89,5
90,2
90,2
91,0
91,0
85,0
87,0
85,5
88,0
87,5
88,5
89,5
89,5
90,2
90,2
91,0
91,0
82,1
84,6
84,5
86,0
86,8
88,5
88,5
89,5
89,7
90,2
91,0
91,0
85,6
87,2
85,5
87,8
87,5
88,5
89,5
89,5
90,2
90,2
91,0
91,0
85,0
87,0
85,5
88,0
87,5
88,5
89,5
89,5
90,2
90,2
91,0
91,0
82,1
84,6
84,5
86,0
86,8
88,5
88,5
89,5
89,7
90,2
91,0
91,0
PN
kW
Model
1,1
1,5
2,2
3
4
5,5
7,5
9,2
11
15
18,5
22
SM90RB14S/311PE
SM90RB14S/315PE
PLM90B14S/322
PLM90B14S/330
PLM112RB14S/340
PLM112B14S/355
PLM132B14S/375
PLM132B14S/392
PLM132B14S/3110
PLM160B34S/3150
PLM160B34S/3185
PLM160B34S/3220
90R
90R
90
90
112R
112
132
132
132
160
160
160
N. of
Poles
fN
TN
Hz
cos
ls / lN
Nm
Ts/TN
Tm/Tn
60
0,80
0,82
0,83
0,84
0,87
0,89
0,88
0,89
0,88
0,91
0,89
0,91
9,11
9,79
9,59
9,12
10,0
11,4
9,83
10,2
10,2
8,60
9,97
9,64
3,01
4,10
6,00
8,22
10,9
15,0
20,3
24,9
29,8
40,4
49,7
59,2
4,15
4,36
3,80
3,52
2,82
4,28
3,21
3,11
3,43
2,24
2,78
2,76
4,29
4,37
4,02
3,65
4,58
5,80
4,68
4,78
4,51
3,84
4,59
4,25
220 V
Y
230 V
380 V
400 V
Y
400 V
660 V
690 V
4,24
5,58
8,14
10,7
13,5
18,2
25,2
30,2
36,1
47,1
59,2
69,1
4,24
5,53
8,12
10,5
13,5
18,1
24,7
29,6
35,2
45,6
58,2
67,4
2,45
3,22
4,70
6,19
7,82
10,5
14,6
17,5
20,8
27,2
34,2
39,9
2,45
3,19
4,69
6,06
7,77
10,4
14,3
17,1
20,3
26,4
33,6
38,9
nN
min-1
IN (A)
kW
1,1
1,5
2,2
3
4
5,5
7,5
9,2
11
15
18,5
22
380 V
2,44
3,23
4,69
6,20
7,84
10,5
14,6
17,5
21,1
27,3
34,3
39,8
2,43
3,22
4,68
6,11
7,77
10,4
14,1
17,1
20,7
26,3
33,6
38,2
1,41
1,86
2,71
3,58
4,52
6,07
8,40
10,1
12,2
15,8
19,8
23,0
1,40
1,86
2,70
3,53
4,49
6,02
8,16
9,86
12,0
15,2
19,4
22,0
3490 3505
3485 3505
3495 3505
3480 3495
3510 3520
3505 3515
3525 3535
3525 3530
3520 3540
3545 3550
3550 3555
3545 3555
Voltage UN
PN
SPECIAL
Manufacturer
3
By June 2011
380 V
Y 380 V
Construction
Design
230 V
IEC SIZE*
PN
220 V
Year of
manufacture
SHE
SERIES
MOTORI
TRIFASE PER SERIE SHE 60 Hz, 2 poli
THREE-PHASE MOTORS A
T 60 Hz, 2 POLES
AT
Operating conditions **
Altitude
T. amb
ATEX
1000 -15 / 40
No
she-ie2-mott-2p60-en_b_te
16
Efficiency N
%
400 V
Y 400 V
Y 660 V
Y 690 V
IE
kW
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
1,1
1,5
2,2
3
4
5,5
7,5
11
15
18,5
22
85,6
87,2
85,5
87,8
87,5
88,5
89,5
90,2
90,2
91,0
91,0
85,0
87,0
85,5
88,0
87,5
88,5
89,5
90,2
90,2
91,0
91,0
82,1
84,6
84,5
86,0
86,8
88,5
88,5
90,2
90,2
91,0
91,0
85,6
87,2
85,5
87,8
87,5
88,5
89,5
90,2
90,2
91,0
91,0
85,0
87,0
85,5
88,0
87,5
88,5
89,5
90,2
90,2
91,0
91,0
82,1
84,6
84,5
86,0
86,8
88,5
88,5
90,2
90,2
91,0
91,0
85,6
87,2
85,5
87,8
87,5
88,5
89,5
90,2
90,2
91,0
91,0
85,0
87,0
85,5
88,0
87,5
88,5
89,5
90,2
90,2
91,0
91,0
82,1
84,6
84,5
86,0
86,8
88,5
88,5
90,2
90,2
91,0
91,0
85,6
87,2
85,5
87,8
87,5
88,5
89,5
90,2
90,2
91,0
91,0
85,0
87,0
85,5
88,0
87,5
88,5
89,5
90,2
90,2
91,0
91,0
82,1
84,6
84,5
86,0
86,8
88,5
88,5
90,2
90,2
91,0
91,0
PN
kW
Model
1,1
1,5
2,2
3
4
5,5
7,5
11
15
18,5
22
SM80B5/311PE
SM90RB5/315PE
PLM90B5/322
PLM100RB5/330
PLM112RB5/340
PLM132RB5/355
PLM132B5/375
PLM160B35/3110
PLM160B35/3150
PLM160B35/3185
PLM180RB35/3220
80
90R
90
100R
112R
132R
132
160
160
160
180R
N. of
Poles
fN
TN
Hz
cos
ls / lN
Nm
Ts/TN
Tm/Tn
60
0,80
0,82
0,83
0,84
0,87
0,89
0,88
0,89
0,91
0,89
0,91
9,11
9,79
9,59
9,12
10,0
11,4
9,83
8,85
8,60
9,97
9,64
3,01
4,10
6,00
8,22
10,9
15,0
20,3
29,6
40,4
49,7
59,2
4,15
4,36
3,80
3,52
2,82
4,28
3,21
2,44
2,24
2,78
2,76
4,29
4,37
4,02
3,65
4,58
5,80
4,68
4,20
3,84
4,59
4,25
B5
2
B35
Voltage UN
V
PN
220 V
Y
230 V
380 V
400 V
Y
400 V
660 V
690 V
nN
1,40
1,86
2,70
3,53
4,49
6,02
8,16
11,6
15,2
19,4
22,0
3490 3505
3485 3505
3495 3505
3480 3495
3510 3520
3505 3515
3525 3535
3545 3550
3545 3550
3550 3555
3545 3555
-1
IN (A)
kW
1,1
1,5
2,2
3
4
5,5
7,5
11
15
18,5
22
380 V
4,24
5,58
8,14
10,7
13,5
18,2
25,2
36,0
47,1
59,2
69,1
4,24
5,53
8,12
10,5
13,5
18,1
24,7
35,1
45,6
58,2
67,4
2,45
3,22
4,70
6,19
7,82
10,5
14,6
20,8
27,2
34,2
39,9
2,45
3,19
4,69
6,06
7,77
10,4
14,3
20,3
26,4
33,6
38,9
min
2,44
3,23
4,69
6,20
7,84
10,5
14,6
20,8
27,3
34,3
39,8
2,43
3,22
4,68
6,11
7,77
10,4
14,1
20,1
26,3
33,6
38,2
1,41
1,86
2,71
3,58
4,52
6,07
8,40
12,0
15,8
19,8
23,0
Manufacturer
3
By June 2011
380 V
Y 380 V
Construction
Design
230 V
IEC SIZE*
PN
220 V
Year of
manufacture
SHS
SERIES
MOTORI
TRIFASE PER SERIE SHS 60 Hz, 2 poli
THREE-PHASE MOTORS A
T 60 Hz, 2 POLES
AT
Operating conditions **
Altitude
T. amb
ATEX
1000 -15 / 40
No
shs-ie2-mott-2p60-en_b_te
17
Efficiency N
%
400 V
Y 400 V
Y 660 V
Y 690 V
IE
kW
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
1,1
1,5
2,2
3
4
5,5
7,5
11
15
18,5
85,6
84,0
85,5
87,5
87,5
88,5
89,5
90,2
90,2
91,0
85,0
84,0
85,5
87,5
87,5
88,5
89,5
90,2
90,2
91,0
82,1
83,3
84,5
86,8
87,5
87,2
88,5
90,2
90,2
91,0
85,6
84,0
85,5
87,5
87,5
88,5
89,5
90,2
90,2
91,0
85,0
84,0
85,5
87,5
87,5
88,5
89,5
90,2
90,2
91,0
82,1
83,3
84,5
86,8
87,5
87,2
88,5
90,2
90,2
91,0
85,6
84,0
85,5
87,5
87,5
88,5
89,5
90,2
90,2
91,0
85,0
84,0
85,5
87,5
87,5
88,5
89,5
90,2
90,2
91,0
82,1
83,3
84,5
86,8
87,5
87,2
88,5
90,2
90,2
91,0
85,6
84,0
85,5
87,5
87,5
88,5
89,5
90,2
90,2
91,0
85,0
84,0
85,5
87,5
87,5
88,5
89,5
90,2
90,2
91,0
82,1
83,3
84,5
86,8
87,5
87,2
88,5
90,2
90,2
91,0
PN
kW
Model
SM80B3/311PE
PLM90B3/315
PLM90B3/322
PLM100B3/330
PLM112B3/340
PLM132B3/355
PLM132B3/375
PLM160B3/3110
PLM160B3/3150
PLM160B3/3185
1,1
1,5
2,2
3
4
5,5
7,5
11
15
18,5
80
90
90
100
112
132
132
160
160
160
N. of
Poles
B3
fN
TN
Hz
cos
ls / lN
Nm
Ts/TN
Tm/Tn
60
0,80
0,86
0,83
0,86
0,88
0,86
0,88
0,89
0,91
0,89
9,11
8,86
9,59
10,2
10,3
10,4
9,83
8,85
8,60
9,97
3,01
4,10
6,00
8,15
10,9
14,8
20,3
29,6
40,4
49,7
4,15
3,24
3,80
3,27
3,54
3,23
3,21
2,44
2,24
2,78
4,29
3,48
4,02
3,61
4,61
4,81
4,68
4,20
3,84
4,59
Voltage UN
V
PN
220 V
230 V
380 V
400 V
4,24
5,21
8,14
10,6
13,3
19,1
25,2
36,0
47,1
59,2
4,24
5,08
8,12
10,6
13,0
19,1
24,7
35,1
45,6
58,2
2,45
3,01
4,70
6,06
7,66
11,1
14,6
20,8
27,2
34,2
2,45
2,93
4,69
6,11
7,52
11,0
14,3
20,3
26,4
33,6
380 V
400 V
660 V
690 V
nN
2,44
3,00
4,69
6,03
7,66
11,1
14,6
20,8
27,3
34,3
2,43
2,94
4,68
5,98
7,49
11,0
14,1
20,1
26,3
33,6
1,41
1,73
2,71
3,48
4,42
6,39
8,40
12,0
15,8
19,8
1,40
1,70
2,70
3,45
4,33
6,34
8,16
11,6
15,2
19,4
3490 3505
3490 3505
3495 3505
3510 3520
3495 3510
3535 3540
3525 3535
3545 3550
3545 3550
3550 3555
min-1
IN (A)
kW
1,1
1,5
2,2
3
4
5,5
7,5
11
15
18,5
** Operating conditions to be referred to motor only. About electric pump, refer to limits in users manual.
18
Manufacturer
3
By June 2011
380 V
Y 380 V
Construction
Design
230 V
IEC SIZE
PN
220 V
Year of
manufacture
SHF
SERIES
MOTORI
TRIFASE PER SERIE SHF 60 Hz, 2 poli
THREE-PHASE MOTORS A
T 60 Hz, 2 POLES (up to 18,5 kW)
AT
Operating conditions **
Altitude
T. amb
ATEX
1000 -15 / 40
No
shf-ie2-mott-2p60-en_b_te
%
220 V
Y 380 V
PN
IE
kW
4/4
3/4
2/4
22
30
37
45
55
75
92,0
92,4
92,4
93,5
93,5
93,6
92,0
92,4
92,4
93,0
93,5
93,6
91,8
91,5
92,0
91,8
92,8
92,2
Model
22
30
37
45
55
75
IEC SIZE
PN
kW
Construction
Design
Manufacturer
180
200
200
225
250
280
B3
B3
B35
N. of
Poles
fN
TN
Hz
cos
ls / lN
Nm
Ts/TN
Tm/Tn
60
0,87
0,86
0,86
0,89
0,89
0,88
7,00
6,40
7,20
7,80
7,70
7,70
59,30
80,65
98,98
120,5
147,0
199,9
1,90
2,10
2,40
2,20
2,20
1,90
2,80
2,40
2,60
2,90
2,80
2,80
B3
Voltage UN
Operating conditions **
220 V
Altitude
nN
-1
IN (A)
kW
22
30
37
45
55
75
Y
380 V
72,20
99,00
122,00
142,00
173,00
238,00
min
41,80
57,30
70,70
82,20
100,00
138,00
3535
3550
3555
3560
3560
3575
See note.
PN
By June 2011
Efficiency N
Year of
manufacture
SHF
SERIES
MOTORI
TRIFASE PER SERIE SHF da (22 a 75) kW 60 Hz, 2 poli
THREE-PHASE MOTORS A
T 60 Hz, 2 POLES (from 22 to 75 kW)
AT
T. amb
ATEX
1000 -15 / 40
No
shf-ie2-mott-75-2p60-en_a_te
Note: Observe the regulations and codes locally in force regarding sorted waste disposal.
** Operating conditions to be referred to motor only. About electric pump, refer to limits in users manual.
19
Efficiency N
%
400 V
Y 400 V
Y 660 V
Y 690 V
IE
kW
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
0,25
0,37
0,55
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
83,2
84,0
84,5
87,5
87,5
87,9
89,5
89,5
91,0
82,3
84,0
84,5
87,5
87,5
87,9
89,5
89,5
91,0
78,4
81,0
82,5
85,7
84,7
87,6
88,7
89,2
91,0
83,2
84,0
84,5
87,5
87,5
87,9
89,5
89,5
91,0
82,3
84,0
84,5
87,5
87,5
87,9
89,5
89,5
91,0
78,4
81,0
82,5
85,7
84,7
87,6
88,7
89,2
91,0
83,2
84,0
84,5
87,5
87,5
87,9
89,5
89,5
91,0
82,3
84,0
84,5
87,5
87,5
87,9
89,5
89,5
91,0
78,4
81,0
82,5
85,7
84,7
87,6
88,7
89,2
91,0
83,2
84,0
84,5
87,5
87,5
87,9
89,5
89,5
91,0
82,3
84,0
84,5
87,5
87,5
87,9
89,5
89,5
91,0
78,4
81,0
82,5
85,7
84,7
87,6
88,7
89,2
91,0
SM471B5S/302
SM471B5S/304
SM490RB14S/305
LLM490RB14S/307
PLM490B5S/311
PLM490B5S/315
PLM4100B5S/322
PLM4100B5S/330
PLM4112B5S/340
PLM4132B14S/355
PLM4132B14S/375
PLM4160B34S/3110
0,25
0,37
0,55
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
71
71
90R
90R
90
90
100
100
112
132
132
160
N. of
Poles
fN
TN
Hz
cos
ls / lN
Nm
Ts/TN
Tm/Tn
60
0,68
0,68
0,77
0,75
0,71
0,68
0,76
0,72
0,78
0,78
0,79
0,85
3,45
3,52
3,55
6,26
6,70
7,19
8,01
8,19
8,48
7,85
7,84
7,25
1,45
2,17
3,18
4,14
6,01
8,18
12,0
16,3
21,8
29,8
40,8
59,4
2,37
2,65
1,80
2,82
2,57
3,04
2,69
2,98
3,01
2,61
2,43
2,27
2,15
2,05
1,90
3,53
3,60
3,74
4,33
4,28
4,22
3,48
3,59
3,07
PN
220 V
380 V
kW
0,25
0,37
0,55
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
1,51
2,18
2,74
3,15
4,78
6,69
8,63
12,5
15,3
20,9
27,9
37,9
Y
230 V
3,13
4,80
6,77
8,57
12,6
15,2
20,6
27,6
37,9
0,87
1,26
1,58
1,82
2,76
3,86
4,98
7,20
8,82
12,1
16,1
21,9
400 V
380 V
IN (A)
1,81
2,77
3,91
4,95
7,26
8,78
11,9
15,9
21,9
1,81
2,74
3,87
4,95
7,00
8,80
12,2
16,2
21,9
Y
400 V
660 V
690 V
nN
-1
min
1,80
2,74
3,92
4,92
7,02
8,72
12,0
16,0
21,5
1,05
1,58
2,23
2,86
4,04
5,08
7,04
9,34
12,6
1,04
1,58
2,26
2,84
4,05
5,03
6,91
9,21
12,4
1650
1630
1650
1730 1735
1745 1750
1750 1755
1755 1760
1760 1765
1755 1755
1760 1765
1750 1755
1765 1770
Voltage UN
Operating conditions **
Altitude
T. amb
ATEX
-15 / 40
Model
1000
PN
kW
SPECIAL
Manufacturer
By June 2011
380 V
Y 380 V
Construction
Design
230 V
IEC SIZE*
PN
220 V
Year of
construction
SHE4
SERIES
MOTORI
TRIFASE PER SERIE SHE4 Ie2 60 Hz, 4 poli
THREE-PHASE MOTORS A
T 60 Hz, 4 POLES
AT
No
she4-ie2-mott-4p60-en_a_te
20
Efficiency N
%
400 V
Y 400 V
Y 660 V
Y 690 V
IE
kW
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
4/4
3/4
2/4
0,25
0,37
0,55
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
83,2
84,0
84,5
87,5
87,5
87,9
89,5
89,5
91,0
82,3
84,0
84,5
87,5
87,5
87,9
89,5
89,5
91,0
78,4
81,0
82,5
85,7
84,7
87,6
88,7
89,2
91,0
83,2
84,0
84,5
87,5
87,5
87,9
89,5
89,5
91,0
82,3
84,0
84,5
87,5
87,5
87,9
89,5
89,5
91,0
78,4
81,0
82,5
85,7
84,7
87,6
88,7
89,2
91,0
83,2
84,0
84,5
87,5
87,5
87,9
89,5
89,5
91,0
82,3
84,0
84,5
87,5
87,5
87,9
89,5
89,5
91,0
78,4
81,0
82,5
85,7
84,7
87,6
88,7
89,2
91,0
83,2
84,0
84,5
87,5
87,5
87,9
89,5
89,5
91,0
82,3
84,0
84,5
87,5
87,5
87,9
89,5
89,5
91,0
78,4
81,0
82,5
85,7
84,7
87,6
88,7
89,2
91,0
SM471B3/302
SM471B3/304
SM480B3 (B5) /305
LLM480B3 (B5) /307
PLM490B3 (B5) /311
PLM490B3 (B5) /315
PLM4100B3 (B5) /322
PLM4100B3 (B5) /330
PLM4112B3 (B5) /340
PLM4132B3 (B5) /355
PLM4132B3 (B5) /375
PLM4160B3 (B5) /3110
0,25
0,37
0,55
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
71
71
80
80
90
90
100
100
112
132
132
160
N. of
Poles
fN
TN
Hz
cos
ls / lN
Nm
Ts/TN
Tm/Tn
60
0,68
0,68
0,77
0,75
0,71
0,68
0,76
0,72
0,78
0,78
0,79
0,85
3,45
3,52
3,55
6,26
6,70
7,19
8,01
8,19
8,48
7,85
7,84
7,25
1,45
2,17
3,18
4,14
6,01
8,18
12,0
16,3
21,8
29,8
40,8
59,4
2,37
2,65
1,80
2,82
2,57
3,04
2,69
2,98
3,01
2,61
2,43
2,27
2,15
2,05
1,90
3,53
3,60
3,74
4,33
4,28
4,22
3,48
3,59
3,07
B3
B3-B35
PN
220 V
380 V
kW
0,25
0,37
0,55
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
1,51
2,18
2,74
3,15
4,78
6,69
8,6
12,5
15,3
20,9
27,9
37,9
Y
230 V
3,13
4,80
6,77
8,57
12,6
15,2
20,6
27,6
37,9
0,87
1,26
1,58
1,82
2,76
3,86
4,98
7,20
8,82
12,1
16,1
21,9
400 V
380 V
IN (A)
1,81
2,77
3,91
4,95
7,26
8,78
11,9
15,9
21,9
1,81
2,74
3,87
4,95
7,00
8,80
12,2
16,2
21,9
Y
400 V
660 V
690 V
nN
-1
min
1,80
2,74
3,92
4,92
7,02
8,72
12,0
16,0
21,5
1,05
1,58
2,23
2,86
4,04
5,08
7,04
9,34
12,6
1,04
1,58
2,26
2,84
4,05
5,03
6,91
9,21
12,4
** Operating conditions to be referred to motor only. About electric pump, refer to limits in users manual.
21
1650
1630
1650
1730 1735
1745 1750
1750 1755
1755 1760
1760 1765
1755 1755
1760 1765
1750 1755
1765 1770
Voltage UN
Operating conditions **
Altitude
T. amb
ATEX
-15 / 40
Model
1000
PN
kW
B3 / B5
Manufacturer
By June 2011
380 V
Y 380 V
Construction
Design
230 V
IEC SIZE
PN
220 V
Year of
construction
SHS4-FHF4
SERIES
MOTORI TRIFASE
PER SERIE SHS4-SHF4 Ie2 60 Hz, 4 poli
THREE-PHASE MOTORS A
T 60 Hz, 4 POLES (up to 11 kW)
AT
No
shs4-ie2-mott-4p60-en_a_te
MOTOR NOISE
The tables below show the mean sound pressure levels (Lp) measured at 1 meters distance in a free field according
to the A curve (ISO 1680 standard).
The noise values are measured with idling 60 Hz motor with a tolerance of 3 dB (A).
SHF MOTORS
60 Hz 2 POLES
SHE-SHS MOTORS
60 Hz 2 POLES
MOTOR TYPE
NOISE
IEC*
LpA
kW
SIZE
dB
kW
SIZE
dB
1,1
1,5
2,2
3
4
5,5
7,5
9,2
11
15
18,5
22
30
37
90R
90R
90R
90
112R
112
112
132
132
160
160
160
200
200
<70
<70
<70
<70
<70
<70
75
77
77
74
75
73
74
74
1,1
1,5
2,2
3
4
5,5
7,5
11
15
18,5
22
30
37
45
55
75
80
90
90
100
112
132
132
160
160
160
180
200
200
225
250
280
<70
<70
<70
<70
<70
<70
75
74
74
75
72
74
74
79
79
81
POWER
POWER
SHE4 MOTORS
60 Hz 4 POLES
NOISE
IEC
LpA
SHS4-SHF4 MOTORS
60 Hz 4 POLES
MOTOR TYPE
NOISE
IEC*
LpA
kW
SIZE
dB
0,25
0,37
0,55
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
71
71
90R
90R
90
90
100
100
112
132
132
160
<70
<70
<70
<70
<70
<70
<70
<70
<70
<70
<70
<70
POWER
MOTOR TYPE
POWER
*R=reduced motor casing size with respect to shaft extension and related flange.
MOTOR TYPE
NOISE
IEC
LpA
kW
SIZE
dB
0,25
0,37
0,55
0,75
1,1
1,5
2,2
3
4
5,5
7,5
11
71
71
80
80
90
90
100
100
112
132
132
160
<70
<70
<70
<70
<70
<70
<70
<70
<70
<70
<70
<70
sh_sh_mott-60hz-en_c_tr
22
AVAILABLE V
OL
TAGES
VOL
OLT
MOTORS FOR SH SERIES (up to 22 kW)
SINGLE-PHASE
THREE-PHASE - 2 POLES
s = Standard voltage
3 x 440-460-480/-
3 x 110-115/190-200
3 x 200-208/346-360
3 x 330-346/575-600
3 x 575/-
3 x 230/400 50 Hz
3 x 265/460 60 Hz
3 x 400/690 50 Hz
3 x 460/- 60 Hz
o
o
o
-
3 x 380-400/660-690
3 x 255-265-277/440-460-480
o
o
o
-
3 x 220-230/380-400
3 x 500-525/-
1 x 200-210
s
s
s
s
3 x 440-460/-
1 x 120-127
o
o
-
3 x 290-300/500-525
1x 110-115
3 x 255-265/440-460
1 x 100
s
s
s
s
PN
kW
3 x 200-208/346-360
1 x 220-230
80
80
80
90
50/60 Hz
3 x 380-400-415/660-690
1 x 110-120
0,75
1,1
1,5
2,2
60 Hz
3 x 220-230-240/380-400-415
PN
kW
1 x 100
50 Hz
1 x 220-240
60 Hz
IEC SIZE
50 Hz
0,75
1,1
1,5
2,2
3
4
5,5
7,5
9,2
11
15
18,5
22
s
s
s
s
s
o
o
o
o
o
o
o
o
o
o
o
o
o
s
s
s
s
s
s
s
s
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
s
s
s
s
s
s
s
s
s
s
s
s
s
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o = Optional voltage
- = Not available
sh-volt-lowa-en_a_te
PN
kW
3 x 110/190
3 x 200-208/346-360
3 x 255-265/440-460
3 x 290-300/500-525
3 x 440-460/-
3 x 500-525/-
3 x 230/380
3 x 380-400/660-690
3 x 440-480/-
3 x 110-115/190-200
3 x 200-208/346-360
3 x 255-265-277/440-460-480
3 x 330-346/575-600
3 x 575/-
3 x 230/400 50 Hz
3 x 265/460 60 Hz
3 x 400/690 50 Hz
3 x 460/- 60 Hz
50/60 Hz
3 x 380-400-415/660-690
60 Hz
3 x 220-230-240/380-400-415
50 Hz
22
30
37
45
55
75
o
o
o
o
o
o
s
s
s
s
s
s
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
s
s
s
s
s
s
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
s = Standard voltage
o = Optional voltage
- = Not available
23
sh-volt-weg-en_b_te
SHE-SHS-SHF SERIES
HYDRA
ULIC PERFORMANCE RANGE A
T 60 Hz, 2 POLES
HYDRAULIC
AT
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
24
SHE-SHS-SHF SERIES
TABELLA DI PRESTAZIONI IDRAULICHE SERIE SHE-SHS-SHF 2 poli 60 Hz
TABLE OF HYDRA
ULIC PERFORMANCES A
T 60 Hz, 2 POLES
HYDRAULIC
AT
PUMP
RATED
TYPE
POWER
Q = CAPACITY
l/min 0
150
200
250
300
400
450
600
700
800
900
1000
1200
1500
1800
2000
3000
3500
3800
m3/h 0
12
15
18
24
27
36
42
48
54
60
72
90
108
120
180
210
228
kW
HP
25-125/116 *
1,1
1,5
25-160/156 *
1,5
25-160/226 *
2,2
25-200/306
25-200/406
5,5
25-250/556
5,5
7,5
25-250/756
7,5
10
25-250/1106
11
15
32-125/116 *
1,1
1,5
32-160/156 *
1,5
32-160/226 *
2,2
32-200/406
5,5
55,3 50 47,4 44
32-250/556
5,5
7,5
32-250/756
7,5
10
32-250/1106
11
15
86,4 80,7 78
40-125/156 *
1,5
18
40-125/226 *
2,2
22,8
32-200/306
61
40 29,8 23,7
75 71,6 63,7 50
15 13,6 13,4 8,9
40-160/306
31,7
40-160/406
5,5
36,4
40-200/556
5,5
7,5
48,1
40-200/756
7,5
10
58,2
40-250/ **
**
**
64,4
40-250/1106
11
15
72,5
40-250/1506
15
20
87
50-125/306
22,2
13
9,7
50-125/406
5,5
26,9
18
14,5
50-160/556
5,5
7,5
32,5
50-160/756
7,5
10
40,3
80 73,5 67
50-200/ **
**
**
49,4
50-200/1106
11
15
52,1
50-250/1506
15
20
68,7
50-250/1856
19
25
78
74,8 73
84,5 83
58
38
30,3
41
33,5
46
71
69 65,5 57,5
81
78
50-250/2206
22
30
87,5
65-160/556
5,5
7,5
21
65-160/756
7,5
10
25,7
65-160/ **
**
**
38,2
65-160/1106
11
15
42,7
65-200/1506
15
20
51,6
65-200/1856
19
25
60,2
58,5
57
65-200/2206
22
30
67,4
65,5
64
61
55
47,5
42
65-250/3006
30
40
83,5
82,5
80
75
68
62
65-250/3706
37
50
95,5
94,5
92
87
80
74
80-160/1506
15
20
36,5
19
80-160/1856
19
25
43,3
43,3 41,5
80-200/2206
22
30
50
80-200/3006
30
40
63,5
80-200/3706
37
50
70,5
70,5
80-250/4506*** 45
60
79,2
79
80-250/5506*** 55
75
92,3
92
80-250/7506*** 75
100
117
67,5
16
13,5
41,4 40,5
39
50 48,5
75
36,2
31
25
45
39
31,5
53,5 47,5
40
20,4
34,4
39
37,5
26
49
47
45,2
34
63,5
61
37
68
66,5 55,5
49
44
76
74,5
62
54
89,5 87,5
75
67
92
26,5
86
she-shs-shf-2p60_c_th
** /1106 = 11kW - 15HP in the SHS-SHF version
Performances in compilance with ISO 9906-Annex A
25
SHE4-SHS4-SHF4 SERIES
HYDRA
ULIC PERFORMANCE RANGE A
T 60 Hz, 4 POLES
HYDRAULIC
AT
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
26
SHE4-SHS4-SHF4 SERIES
TABELLA DI PRESTAZIONI IDRAULICHE SERIE SHE4-SHS4-SHF4 4 poli 60 Hz
TABLE OF HYDRA
ULIC PERFORMANCES A
T 60 Hz, 4 POLES
HYDRAULIC
AT
PUMP
RATED
TYPE
POWER
Q = CAPACITY
l/min 0
3
m /h 0
kW
75
100
125
150
200
250
300
350
400
450
500
600
750
1000
1200
1800
2000
2200
4,5
7,5
12
2
15
15
18
18
21
21
24
24
27
27
30
30
36
36
45
45
60
60
72
7
108
120
132
HP
6,3 5,6
5,2
4,6
8,1 7,3
6,8
6,1
5,4
3,7
9,9 9,1
8,6
7,2
5,6
11,4 9,9
7,9
6,7
3,9
6,6
25-250/076
0,75
25-250/116
1,1
1,5
25-250/156
1,5
20,4 18,8
18
2,7
6,3 5,6
5,2
4,7
4,1
8,2 7,3
6,8
6,2
5,5
9,9 9,1
8,6
7,3
5,8
8,5
7,5
4,9
32-250/076
0,75
32-250/116
1,1
1,5
32-250/156
1,5
20,4 19
5,2
4,6
4,2
3,7
3,1
2,5
1,8
6,8
6,2
5,8
5,2
4,6
3,3
7,7
6,8
6,1
5,3
4,3
3,3
2,3
9,2
8,4
7,7
6,9
5,9
4,8
3,8
6,6
40-200/076
0,75
11,7
40-200/116
1,1
1,5
14,6
40-250/116
1,1
1,5
15,5
40-250/156
1,5
17,6
40-250/226
2,2
23
7,8
5,6
4,4
4,1
3,7
3,4
2,1
6,7
5,6
5,3
4,6
4,2
3,4
50-160/076
0,75
8,7
7,5
7,1
6,8
6,3
5,9
4,8
50-160/116
1,1
1,5
10,3
9,1
8,7
8,3
7,9
7,4
6,3
50-200/116
1,1
1,5
12,1
8,9
7,1
4,5
50-200/156
1,5
14,7
50-250/226A
2,2
17,4
50-250/226
2,2
21,1
17
50-250/306
24,9
21
19,2 15,3
65-160/076
0,75
5,8
5,4
5,3
4,5
3,7
65-160/116A
1,1
1,5
6,8
6,4
6,2
5,5
4,7
3,1
65-160/ 116
1,1
1,5
9,9
8,7
8,3
7,3
6,1
3,7
65-160/156
1,5
11,2
10
9,7
9,4
8,7
7,4
65-200/156
1,5
13,4
11,4
11
10,1 8,6
65-200/226
2,2
15,9
65-200/306
19
65-250/406
5,5
23
65-250/556
5,5
7,5
27,7
80-160/226A
2,2
80-160/226
2,2
80-200/306
15
5,7
80-200/406
5,5
17
7,9
80-250/556
5,5
7,5
20,9
19,4
80-250/756
7,5
10
27,2
80-250/1106
11
15
30,3
6,7
15
11
5
5,4
7,9
20
18,1 14,4
11
19
15,7
10,4
9,1
8,6
7,5
6,6
3,2
11,6
10,3 9,7
8,7
7,7
4,2
29
Performances in compilance with ISO 9906-Annex A
27
18
6,3
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
28
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
29
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
30
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
31
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
32
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
33
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
34
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
35
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
36
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
37
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
38
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
39
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
40
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
41
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
42
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
43
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
44
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
45
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
46
SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
47
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
48
SHE-SHS-SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
49
SHF SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 2 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
50
SHE4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
51
SHE4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
52
SHE4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
53
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
54
SHE4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
55
SHE4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
56
SHE4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
57
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
58
SHE4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
59
SHE4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
60
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
61
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
62
SHE4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
63
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
64
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
65
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
66
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
67
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
68
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
69
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
70
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
71
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
72
SHE4-SHS4-SHF4 SERIES
OPERA
TING CHARACTERISTIC
S A
T 60 Hz, 4 POLES
OPERATING
CHARACTERISTICS
AT
The NPSH values are laboratory values; for practical use we suggest increasing these values by 0,5 m.
These performances are valid for liquids with density = 1,0 Kg/dm3 and kinematic viscosity = 1 mm2/sec.
73
74
DIMENSIONS
AND WEIGHTS
75
SHE SERIES
DIMENSIONS AND WEIGHTS A
T 60 Hz, 2 POLES
AT
76
SHE SERIES
DIMENSIONI E PESI SERIE SHE 2 poli 60 Hz
DIMENSIONS AND WEIGHTS A
T 60 Hz, 2 POLES
AT
DIMENSIONS (mm)
PUMP
TYPE
DNM DNA
SHE 25-125/116/D
SHE 25-160/156/D
SHE 25-160/226/C
SHE 25-200/306/P
SHE 25-200/406/P
SHE 25-250/556/P
SHE 25-250/756/P
SHE 25-250/1106/P
SHE 32-125/116/D
SHE 32-160/156/D
SHE 32-160/226/C
SHE 32-200/306/P
SHE 32-200/406/P
SHE 32-250/556/P
SHE 32-250/756/P
SHE 32-250/1106/P
SHE 40-125/156/D
SHE 40-125/226/C
SHE 40-160/306/P
SHE 40-160/406/P
SHE 40-200/556/P
SHE 40-200/756/P
SHE 40-250/926/P
SHE 40-250/1106/P
SHE 40-250/1506/P
SHE 50-125/306/P
SHE 50-125/406/P
SHE 50-160/556/P
SHE 50-160/756/P
SHE 50-200/926/P
SHE 50-200/1106/P
SHE 50-250/1506/P
SHE 50-250/1856/P
SHE 50-250/2206/P
SHE 65-160/556/P
SHE 65-160/756/P
SHE 65-160/926/P
SHE 65-160/1106/P
SHE 65-200/1506/P
SHE 65-200/1856/P
SHE 65-200/2206/P
SHE 80-160/1506/P
SHE 80-160/1856/P
SHE 80-200/2206/P
WEIGHT
SUPPORT
PUMP
a
h2
25 50 80 140
25 50 80 160
25 50 80 160
25 50 80 180
25 50 80 180
25 50 100 225
25 50 100 225
25 50 100 225
32 50 80 140
32 50 80 160
32 50 80 160
32 50 80 180
32 50 80 180
32 50 100 225
32 50 100 225
32 50 100 225
40 65 80 140
40 65 80 140
40 65 80 160
40 65 80 160
40 65 100 180
40 65 100 180
40 65 100 225
40 65 100 225
40 65 100 225
50 65 100 160
50 65 100 160
50 65 100 180
50 65 100 180
50 65 100 200
50 65 100 200
50 65 100 225
50 65 100 225
50 65 100 225
65 80 100 200
65 80 100 200
65 80 100 200
65 80 100 200
65 80 100 225
65 80 100 225
65 80 100 225
80 100 125 225
80 100 125 225
80 100 125 250
w1
208
208
208
208
208
208
208
208
208
208
305
343
305
343
305
343
343
305
343
343
305
343
343
-
129
129
134
134
154
168
191
191
129
129
134
134
154
168
191
191
129
134
134
154
168
191
191
191
240
134
154
168
191
191
191
240
240
240
168
191
191
191
240
240
240
240
240
240
49
49
49
49
49
49
49
49
49
49
c *c1
5
5
5
5
5
5
5
5
5
5
20
20
20
20
20
20
20
20
20
20
h1
m1
n1
160
160
160
160
160
180
180
180
112
132
132
160
160
180
180
180
112
112
132
132
160
160
180
180
180
132
132
160
160
160
160
180
180
180
160
160
160
160
180
180
180
180
180
180
304
304
304
304
304
304
304
304
304
304
210
210
254
254
210
254
254
210
254
254
190
210
210
230
230
265
265
265
190
210
210
230
230
265
265
265
190
190
210
210
230
230
265
265
304
210
210
210
210
245
245
304
304
304
245
245
245
245
304
304
304
304
304
304
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
254
130
130
130
130
130
130
254
254
254
130
130
130
130
254
254
254
254
254
254
15
15
15
15
15
15
15
15
15
15
218
253
253
284
284
345
345
345
218
253
253
284
284
345
345
345
218
218
253
253
284
284
345
345
345
253
253
253
253
310
310
345
345
345
310
310
310
310
310
310
310
345
345
345
300
320
320
340
340
405
405
405
252
292
292
340
340
405
405
405
252
252
292
292
340
351
405
405
420
292
292
340
351
360
360
420
420
420
360
360
360
360
420
420
420
420
420
430
443
443
478
478
499
553
567
605
443
443
478
478
499
553
567
605
443
478
478
499
553
567
605
605
694
498
519
553
567
605
605
694
694
694
553
567
605
605
694
694
694
719
719
719
98
98
98
98
98
98
98
98
98
98
98
98
98
98
98
98
100
100
100
100
100
100
107
107
107
104
104
104
104
104
104
107
107
107
130
130
130
130
130
130
130
160
160
160
max
kg
20,6
24,4
29
38
41
66
84
92
20,6
24,4
29
38
41
66
84
92
22,4
30
32
40
52
65
89
94
130
33
40
52
67
84
88
131
144
147
63
80
95
102
131
141
151
128
139
156
sh-she-2p60-en_g_td
77
SHE4 SERIES
DIMENSIONS AND WEIGHTS A
T 60, 4 POLES
AT
78
SHE4 SERIES
DIMENSIONI E PESI SERIE SHE4 4 poli 60 Hz
DIMENSIONS AND WEIGHTS A
T 60, 4 POLES
AT
DIMENSIONS (mm)
PUMP
TYPE
DNM DNA
SHE4 25-125/026/A
SHE4 25-160/026/A
SHE4 25-160/036/A
SHE4 25-200/036/A
SHE4 25-200/056/A
SHE4 25-250/076/C
SHE4 25-250/116/P
SHE4 25-250/156/P
SHE4 32-125/026/A
SHE4 32-160/026/A
SHE4 32-160/036/A
SHE4 32-200/036/A
SHE4 32-200/056/A
SHE4 32-250/076/C
SHE4 32-250/116/P
SHE4 32-250/156/P
SHE4 40-125/026/A
SHE4 40-125/036/A
SHE4 40-160/036/A
SHE4 40-160/056/A
SHE4 40-200/076/C
SHE4 40-200/116/P
SHE4 40-250/116/P
SHE4 40-250/156/P
SHE4 40-250/226/P
SHE4 50-125/036/A
SHE4 50-125/056/A
SHE4 50-160/076/C
SHE4 50-160/116/P
SHE4 50-200/116/P
SHE4 50-200/156/P
SHE4 50-250/226A/P
SHE4 50-250/226/P
SHE4 50-250/306/P
SHE4 65-160/076/C
SHE4 65-160/116A/P
SHE4 65-160/116/P
SHE4 65-160/156/P
SHE4 65-200/156/P
SHE4 65-200/226/P
SHE4 65-200/306/P
SHE4 65-250/406/P
SHE4 65-250/556/P
SHE4 80-160/226A/P
SHE4 80-160/226/P
SHE4 80-200/306/P
SHE4 80-200/406/P
SHE4 80-250/556/P
SHE4 80-250/756/P
SHE4 80-250/1106/P
WEIGHT
PUMP
25
25
25
25
25
25
25
25
32
32
32
32
32
32
32
32
40
40
40
40
40
40
40
40
40
50
50
50
50
50
50
50
50
50
65
65
65
65
65
65
65
65
65
80
80
80
80
80
80
80
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
80
80
80
80
80
80
80
80
80
100
100
100
100
100
100
100
80
80
80
80
80
100
100
100
80
80
80
80
80
100
100
100
80
80
80
80
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
125
125
125
125
125
125
125
h2
SUPPORT
w
140 160 160 180 180 225 225 225 140 160 160 180 180 225 225 225 140 140 160 160 180 180 225 225 225 160 160 180 180 200 200 225 225 225 200 200 200 200 225 225 225 250 250 225 225 250 250 280 280 280 208
w1
c *c1
315
343
315
343
343
-
121
121
121
121
129
128
134
134
121
121
121
121
129
128
134
134
121
121
121
129
128
134
134
134
168
121
129
128
134
134
134
168
168
168
128
134
134
134
134
168
168
168
191
168
168
168
168
191
191
240
49
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 40
h1
m1
160 160 160 160 160 180 180 180 112 132 132 160 160 180 180 180 112 112 132 132 160 160 180 180 180 132 132 160 160 160 160 180 180 180 160 160 160 160 180 180 180 200 200 180 180 180 180 200 200 200 304 210
n1
190
210
210
230
230
265
265
265
190
210
210
230
230
265
265
265
190
190
210
210
230
230
265
265
265
210
210
210
210
245
245
265
265
265
245
245
245
245
245
245
245
265
265
265
265
265
265
303
303
304
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
210
210
254
15
218
253
253
284
284
345
345
345
218
253
253
284
284
345
345
345
218
218
253
253
285
285
345
345
345
253
253
253
253
310
310
345
345
345
310
310
310
310
310
310
310
345
345
345
345
345
345
383
383
383
252
292
292
340
340
405
405
405
252
292
292
340
340
405
405
405
252
252
292
292
340
340
405
405
405
292
292
340
340
360
360
405
405
405
360
360
360
360
405
405
405
450
450
405
405
430
430
480
480
480
411
411
411
411
443
431
498
498
411
411
411
411
443
431
498
498
411
411
411
443
431
498
498
498
522
431
463
431
498
498
498
522
522
553
431
498
498
498
498
522
553
598
605
547
547
578
623
630
630
719
98
98
98
98
98
98
98
98
98
98
98
98
98
98
98
98
100
100
100
100
100
100
107
107
107
104
104
104
104
104
104
107
107
107
130
130
130
130
130
130
130
140
140
160
160
160
160
160
160
160
max
kg
16
18
19
26
27
42
49
51
16
18
19
26
27
42
49
51
17
18
20
24
27
35
47
61
65
20
26
30
40
48
51
56
56
62
36
44
45
48
56
64
64
84
97
63
66
69
88
102
106
145
sh-she4-4p60-en_g_td
79
SHS SERIES
DIMENSIONS AND WEIGHTS A
T 60 Hz, 2 POLES
AT
80
SHS SERIES
DIMENSIONI E PESI SERIE SHS 2 poli 60 Hz
DIMENSIONS AND WEIGHTS A
T 60 Hz, 2 POLES
AT
DIMENSIONS (mm)
PUMP
TYPE
WEIGHT
SUPPORT
PUMP
DNM DNA
h2
B
n
n1
w1
c *c1 h1
m1
SHS 25-125/116/D
25
50
80
155 140
129
- 160
190 130
- 218 300
max
498
98
24,6
kg
SHS 25-160/156/D
25
50
80
155 160
129
- 160
210 130
- 253 320
498
98
27,4
SHS 25-160/226/C
25
50
80
155 160
134
- 160
210 130
- 253 320
533
98
33
SHS 25-200/306/P
25
50
80
165 180
134
- 160
230 130
- 284 340
543
98
44
SHS 25-200/406/P
25
50
80
165 180
154
- 160
230 130
- 284 340
564
98
51
SHS 25-250/556/P
25
50
399 168
- 180
265 130
- 345 405
667
98
77
SHS 25-250/756/P
25
50
399 191
- 180
265 130
- 345 405
659
98
91
SHS 25-250/1106/P
25
50
816
98
130
SHS 32-125/116/D
32
50
80
155 140
129
- 112
190 130
- 218 252
498
98
24,6
SHS 32-160/156/D
32
50
80
155 160
129
- 132
210 130
- 253 292
498
98
27,4
SHS 32-160/226/C
32
50
80
155 160
134
- 132
210 130
- 253 292
533
98
33
SHS 32-200/306/P
32
50
80
165 180
134
- 160
230 130
- 284 340
543
98
44
SHS 32-200/406/P
32
50
80
165 180
154
- 160
230 130
- 284 340
564
98
51
SHS 32-250/556/P
32
50
399 168
- 180
265 130
- 345 405
667
98
77
SHS 32-250/756/P
32
50
397 191
- 180
265 130
- 345 405
659
98
91
SHS 32-250/1106/P
32
50
816
98
130
SHS 40-125/156/D
40
65
80
155 140
129
- 112
190 130
- 218 252
498 100
25,4
SHS 40-125/226/C
40
65
80
155 140
134
- 112
190 130
- 218 252
533 100
32
SHS 40-160/306/P
40
65
80
165 160
134
- 132
210 130
- 253 292
543 100
42
SHS 40-160/406/P
40
65
80
165 160
154
- 132
210 130
- 253 292
564 100
48
SHS 40-200/556/P
40
65
399 168
- 160
230 130
- 300 340
667 100
63
397 191
- 160
230 130
SHS 40-200/756/P
40
65
- 300 351
659 100
80
SHS 40-250/1106A/P
40
65
816 107
129
SHS 40-250/1106A/P
40
65
816 107
129
SHS 40-250/1506/P
40
65
816 107
142
SHS 50-125/306/P
50
65
134
- 132
210 130
- 253 292
563 104
37
SHS 50-125/406/P
50
65
154
- 132
210 130
- 253 292
584 104
48
SHS 50-160/556/P
50
65
399 168
- 160
210 130
- 300 340
667 104
62
397 191
- 160
210 130
SHS 50-160/756/P
50
65
- 300 351
659 104
81
SHS 50-200/1106A/P
50
65
816 104
126
SHS 50-200/1106/P
50
65
816 104
130
SHS 50-250/1506/P
50
65
816 107
148
SHS 50-250/1856/P
50
65
816 107
156
SHS 50-250/2206/P
50
65
816 107
162
SHS 65-160/556/P
65
80
399 168
- 160
245 130
- 310 360
667 130
78
SHS 65-160/756/P
65
80
397 191
- 160
245 130
- 310 360
659 130
93
SHS 65-160/1106A/P
65
80
816 130
116
SHS 65-160/1106/P
65
80
816 130
120
SHS 65-200/1506/P
65
80
816 130
147
SHS 65-200/1856/P
65
80
816 130
153
SHS 65-200/2206/P
65
80
816 130
167
SHS 65-250/3006/C
65
80
317 82 30
985 140
290
SHS 65-250/3706/C
65
80
317 82 30
985 140
322
SHS 80-160/1506/P
841 160
152
SHS 80-160/1856/P
841 160
160
SHS 80-200/2206/P
841 160
162
SHS 80-200/3006/C
317 82 30
312
SHS 80-200/3706/C
317 82 30
317
sh-shs-2p60-en_h_td
81
SHS4 SERIES
DIMENSIONS AND WEIGHTS A
T 60 Hz, 4 POLES
AT
82
SHS4 SERIES
DIMENSIONI E PESI SERIE SHS4 4 poli 60 Hz
DIMENSIONS AND WEIGHTS A
T 60 Hz, 4 POLES
AT
DIMENSIONS (mm)
PUMP
TYPE
DNM DNA
SHS4 25-250/076/C
SHS4 25-250/116/P
SHS4 25-250/156/P
SHS4 32-250/076/C
SHS4 32-250/116/P
SHS4 32-250/156/P
SHS4 40-200/076/C
SHS4 40-200/116/P
SHS4 40-250/116/P
SHS4 40-250/156/P
SHS4 40-250/226/P
SHS4 50-160/076/C
SHS4 50-160/116/P
SHS4 50-200/116/P
SHS4 50-200/156/P
SHS4 50-250/226A/P
SHS4 50-250/226/P
SHS4 50-250/306/P
SHS4 65-160/076/C
SHS4 65-160/116A/P
SHS4 65-160/116/P
SHS4 65-160/156/P
SHS4 65-200/156/P
SHS4 65-200/226/P
SHS4 65-200/306/P
SHS4 65-250/406/P
SHS4 65-250/556/P
SHS4 80-160/226A/P
SHS4 80-160/226/P
SHS4 80-200/306/P
SHS4 80-200/406/P
SHS4 80-250/556/P
SHS4 80-250/756/P
SHS4 80-250/1106/P
WEIGHT
PUMP
25
25
25
32
32
32
40
40
40
40
40
50
50
50
50
50
50
50
65
65
65
65
65
65
65
65
65
80
80
80
80
80
80
80
50
50
50
50
50
50
65
65
65
65
65
65
65
65
65
65
65
65
80
80
80
80
80
80
80
80
80
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
125
125
125
125
125
125
125
155
155
155
155
155
155
155
155
155
155
165
155
155
155
155
165
165
165
155
155
155
155
155
165
165
165
192
165
165
165
165
192
192
222
h2
SUPPORT
w
225 225 225 225 225 225 180 180 225 225 225 180 180 200 200 225 225 225 200 200 200 200 225 225 225 250 250 225 225 250 250 280 280 280 330
w1
380
435
380
435
435
-
128 134 134 128 134 134 128 134 134 134 168 128 134 134 134 168 168 168 128 134 134 134 134 168 168 168 191 168 168 168 168 191 191 240 49
c *c1
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 40
h1
m1
180 180 180 180 180 180 160 160 180 180 180 160 160 160 160 180 180 180 160 160 160 160 180 180 180 200 200 180 180 180 180 200 200 200 304 210
265
265
265
265
265
265
230
230
265
265
265
210
210
245
245
265
265
265
245
245
245
245
245
245
245
265
265
265
265
265
265
303
303
304
n1
345
345
345
345
345
345
284
284
345
345
345
253
253
310
310
345
345
345
310
310
310
310
310
310
310
345
345
345
345
345
345
383
383
383
405
405
405
405
405
405
340
340
405
405
405
340
340
360
360
405
405
405
360
360
360
360
405
405
405
450
450
405
405
430
430
480
480
480
130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 210 210 254 15
486
553
553
486
553
553
486
553
553
553
587
486
553
553
553
587
587
618
486
553
553
553
553
587
618
663
697
612
612
643
688
722
722
841
98
98
98
98
98
98
100
100
107
107
107
104
104
104
104
107
107
107
130
130
130
130
130
130
130
140
140
160
160
160
160
160
160
160
max
kg
42
49
50
42
49
50
31
37
51
64
68
30
36
49
52
58
59
65
38
46
48
51
54
71
72
97
104
67
67
72
88
107
113
153
sh-shs4-4p60-en_f_td
83
84
PUMP TYPE
DNM DNA
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
SHF
25-125
25-160
25-200
25-250
32-125
32-160
32-200
32-250
40-125
40-160
40-200
40-250
50-125
50-160
50-200
50-250
65-160
65-200
65-250
80-160
80-200
80-250
25
25
25
25
32
32
32
32
40
40
40
40
50
50
50
50
65
65
65
80
80
80
50
50
50
50
50
50
50
50
65
65
65
65
65
65
65
65
80
80
80
100
100
100
WEIGHT
SUPPORT
PUMP
a
h1
h2
80
80
80
100
80
80
80
100
80
80
100
100
100
100
100
100
100
100
100
125
125
125
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
360
470
360
470
470
112
132
160
180
112
132
160
180
112
132
160
180
132
160
160
180
160
180
200
180
180
200
140
160
180
225
140
160
180
225
140
160
180
225
160
180
200
225
200
225
250
225
250
280
47
48
47
54
47
48
47
54
47
48
50
54
48
48
40
54
48
65
80
54
65
80
3
3
3
6
3
3
3
6
3
3
3
6
3
3
6
6
6
15
18
6
15
18
m1
SHAFT
n1
260
260
260
260
260
260
260
260
260
260
260
260
260
260
260
260
260
260
340
260
340
340
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
32
24
32
32
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
80
50
80
80
kg
27 8 218 98
27 8 253 98
27 8 284 98
27 8 345 98
27 8 218 98
27 8 253 98
27 8 284 98
27 8 345 98
27 8 218 100
27 8 253 100
27 8 284 100
27 8 345 107
27 8 253 104
27 8 253 104
27 8 310 104
27 8 345 107
27 8 310 130
27 8 310 130
35 10 345 140
27 8 345 160
35 10 345 160
35 10 383 160
14
17
20
34
14
17
20
34
16
18
20
33
17
24
30
37
31
42
55
37
55
67
sh-shf-en_c_td
85
86
PUMP
TYPE
SHF 25-125/116/D
SHF 25-160/156/P
SHF 25-160/226/P
SHF 25-200/306/P
SHF 25-200/406/P
SHF 25-250/556/P
SHF 25-250/756/P
SHF 25-250/1106/P
SHF 32-125/116/D
SHF 32-160/156/P
SHF 32-160/226/P
SHF 32-200/306/P
SHF 32-200/406/P
SHF 32-250/556/P
SHF 32-250/756/P
SHF 32-250/1106/P
SHF 40-125/156/P
SHF 40-125/226/P
SHF 40-160/306/P
SHF 40-160/406/P
SHF 40-200/556/P
SHF 40-200/756/P
SHF 40-250/1106A/P
SHF 40-250/1106/P
SHF 40-250/1506/P
SHF 50-125/306/P
SHF 50-125/406/P
SHF 50-160/556/P
SHF 50-160/756/P
SHF 50-200/1106A/P
SHF 50-200/1106/P
SHF 50-250/1506/P
SHF 50-250/1856/P
SHF 50-250/2206/C
SHF 65-160/556/P
SHF 65-160/756/P
SHF 65-160/1106A/P
SHF 65-160/1106/P
SHF 65-200/1506/P
SHF 65-200/1856/P
SHF 65-200/2206/C
SHF 65-250/3006/C
SHF 65-250/3706/C
SHF 80-160/1506/P
SHF 80-160/1856/P
SHF 80-200/2206/C
SHF 80-200/3006/C
SHF 80-200/3706/C
SHF 80-250/4506/C
SHF 80-250/5506/C
SHF 80-250/7506/C
WEIGHT FLEXIBLE
for
DNM
DNA
B1
B2
L1
L2
L3
h1
h2
25
25
25
25
25
25
25
25
32
32
32
32
32
32
32
32
40
40
40
40
40
40
40
40
40
50
50
50
50
50
50
50
50
50
65
65
65
65
65
65
65
65
65
80
80
80
80
80
80
80
80
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
80
80
80
80
80
80
80
80
80
100
100
100
100
100
100
100
100
80
80
80
80
80
100
100
100
80
80
80
80
80
100
100
100
80
80
80
80
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
125
125
125
125
125
125
125
125
320
350
350
350
350
440
440
490
320
350
350
350
350
440
440
490
350
350
350
350
400
400
490
490
490
350
350
400
400
440
440
490
490
490
400
400
490
490
490
490
490
550
550
490
490
490
550
550
550
600
670
360
390
390
390
390
490
490
540
360
390
390
390
390
490
490
540
390
390
390
390
450
450
540
540
540
390
390
450
450
490
490
540
540
540
450
450
540
540
540
540
540
610
610
540
540
540
610
610
610
660
730
748
792
792
823
826
910
910
1067
748
792
792
823
826
910
910
1067
792
792
823
826
910
910
1067
1067
1067
843
846
910
910
1067
1067
1067
1067
1127
910
910
1067
1067
1067
1067
1127
1340
1340
1092
1092
1262
1365
1365
1454
1563
1670
540
600
600
600
600
740
740
840
540
600
600
600
600
740
740
840
600
600
600
600
660
660
840
840
840
600
600
660
660
740
740
840
840
840
660
660
840
840
840
840
840
940
940
840
840
840
940
940
940
1060
1200
800
900
900
900
900
1120
1120
1250
800
900
900
900
900
1120
1120
1250
900
900
900
900
1000
1000
1250
1250
1250
900
900
1000
1000
1120
1120
1250
1250
1250
1000
1000
1250
1250
1250
1250
1250
1400
1400
1250
1250
1250
1400
1400
1400
1600
1800
130
150
150
150
150
190
190
205
130
150
150
150
150
190
190
205
150
150
150
150
170
170
205
205
205
150
150
170
170
190
190
205
205
205
170
170
205
205
205
205
205
230
230
205
205
205
230
230
230
270
300
60
60
60
60
60
75
75
75
60
60
60
60
60
75
75
75
60
60
60
60
60
60
75
75
75
60
60
60
60
60
60
75
75
75
75
75
75
75
75
75
75
90
90
75
75
75
75
75
90
90
90
212
232
232
260
260
280
280
280
212
232
232
260
260
280
280
280
212
212
232
232
260
260
280
280
280
232
232
260
260
260
260
280
280
280
260
260
260
260
280
280
280
310
310
280
280
280
310
310
365
390
420
140
160
160
180
180
225
225
225
140
160
160
180
180
225
225
225
140
140
160
160
180
180
225
225
225
160
160
180
180
200
200
225
225
225
200
200
200
200
225
225
225
250
250
225
225
250
250
250
280
280
280
Hmax screws
352
392
392
440
440
505
505
512
352
392
392
440
440
505
505
512
352
352
392
392
454
454
524
524
524
392
392
454
454
504
504
524
524
559
460
460
504
504
524
524
559
627
627
524
524
559
627
627
749
792
892
M16
M16
M16
M16
M16
M20
M20
M20
M16
M16
M16
M16
M16
M20
M20
M20
M16
M16
M16
M16
M20
M20
M20
M20
M20
M16
M16
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M24
M24
M20
M20
M20
M24
M24
M24
M24
M24
COUPLING
kg
TYPE
68,6
73
75
95
97
130
134
181
68,6
73
75
95
97
130
134
181
74
77
92
96
123
128
167
170
175
92
95
120
122
145
150
165
170
246
150
154
162
162
185
190
274
367
403
209
220
302
373
402
501
582
700
A2
A3
A3
B1
B1
C1
C1
C2
A2
A3
A3
B1
B1
C1
C1
C2
A3
A3
B1
B1
C1
C1
C2
C2
C2
B1
B1
C1
C1
C2
C2
C2
C2
D1
C1
C1
C2
C2
C2
C2
D1
E1
E1
C2
C2
D2
E1
E1
E1
F1
G1
sh-shf-2p60-en_g_td
87
88
PUMP
TYPE
DNM DNA
SHF4 25-125/026/A
SHF4 25-160/026/A
SHF4 25-160/036/A
SHFE4 25-200/036/A
SHF4 25-200/056/A
SHF4 25-250/076/C
SHF4 25-250/116/P
SHF4 25-250/156/P
SHF4 32-125/026/A
SHF4 32-160/026/A
SHF4 32-160/036/A
SHFE4 32-200/036/A
SHF4 32-200/056/A
SHF4 32-250/076/C
SHF4 32-250/116/P
SHF4 32-250/156/P
SHF4 40-125/026/A
SHF4 40-125/036/A
SHF4 40-160/036/A
SHF4 40-160/056/A
SHF4 40-200/076/C
SHF4 40-200/116/P
SHF4 40-250/116/P
SHF4 40-250/156/P
SHF4 40-250/226/P
SHF4 50-125/036/A
SHF4 50-125/056/A
SHF4 50-160/076/C
SHF4 50-160/116/P
SHF4 50-200/116/P
SHF4 50-200/156/P
SHF4 50-250/226A/P
SHF4 50-250/226/P
SHF4 50-250/306/P
SHF4 65-160/076/C
SHF4 65-160/116A/P
SHF4 65-160/116/P
SHF4 65-160/156/P
SHF4 65-200/156/P
SHF4 65-200/226/P
SHF4 65-200/306/P
SHF4 65-250/406/P
SHF4 65-250/556/P
SHF4 80-160/226A/P
SHF4 80-160/226/P
SHF4 80-200/306/P
SHF4 80-200/406/P
SHF4 80-250/556/P
SHF4 80-250/756/P
SHF4 80-250/1106/P
WEIGHT
for
25
25
25
25
25
25
25
25
32
32
32
32
32
32
32
32
40
40
40
40
40
40
40
40
40
50
50
50
50
50
50
50
50
50
65
65
65
65
65
65
65
65
65
80
80
80
80
80
80
80
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
80
80
80
80
80
80
80
80
80
100
100
100
100
100
100
100
FLEXIBLE
COUPLING
B1
B2
L1
L2
L3
h1
h2
Hmax
screws
kg
TYPE
80
80
80
80
80
100
100
100
80
80
80
80
80
100
100
100
80
80
80
80
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
125
125
125
125
125
125
125
320
320
320
320
320
400
400
400
320
320
320
320
320
400
400
400
320
320
320
320
350
350
400
400
400
320
320
350
350
350
350
400
400
400
350
400
400
400
400
440
440
440
440
440
440
440
440
490
490
490
360
360
360
360
360
450
450
450
360
360
360
360
360
450
450
450
360
360
360
360
390
390
450
450
450
360
360
390
390
390
390
450
450
450
390
450
450
450
450
490
490
490
490
490
490
490
490
540
540
540
704
704
704
704
746
734
811
811
704
704
704
704
746
734
811
811
704
704
704
746
734
811
811
811
888
724
766
734
811
811
811
888
888
888
734
811
811
811
811
888
888
1031
1058
913
913
1023
1056
1083
1083
1202
540
540
540
540
540
660
660
660
540
540
540
540
540
660
660
660
540
540
540
540
600
600
660
660
660
540
540
600
600
600
600
660
660
660
600
600
660
660
660
740
740
740
740
740
740
740
740
840
840
840
800
800
800
800
800
1000
1000
1000
800
800
800
800
800
1000
1000
1000
800
800
800
800
900
900
1000
1000
1000
800
800
900
900
900
900
1000
1000
1000
900
1000
1000
1000
1000
1120
1120
1120
1120
1120
1120
1120
1120
1250
1250
1250
130
130
130
130
130
170
170
170
130
130
130
130
130
170
170
170
130
130
130
130
150
150
170
170
170
130
130
150
150
150
150
170
170
170
150
170
170
170
170
190
190
190
190
190
190
190
190
205
205
205
60
60
60
60
60
75
75
75
60
60
60
60
60
75
75
75
60
60
60
60
60
60
75
75
75
60
60
60
60
60
60
75
75
75
75
75
75
75
75
75
75
90
90
75
75
75
75
90
90
90
212
232
232
260
260
280
280
280
212
232
232
260
260
280
280
280
212
212
232
232
260
260
280
280
280
232
232
260
260
260
260
280
280
280
260
260
260
260
280
280
280
310
310
280
280
280
280
310
310
310
140
160
160
180
180
225
225
225
140
160
160
180
180
225
225
225
140
140
160
160
180
180
225
225
225
160
160
180
180
200
200
225
225
225
200
200
200
200
225
225
225
250
250
225
225
250
250
280
280
280
352
392
392
440
440
505
505
505
352
392
392
440
440
505
505
505
352
352
392
392
440
440
505
505
505
392
392
440
440
460
460
505
505
505
460
460
460
460
505
505
505
550
550
505
505
530
530
590
590
590
M16
M16
M16
M16
M16
M20
M20
M20
M16
M16
M16
M16
M16
M20
M20
M20
M16
M16
M16
M16
M16
M16
M20
M20
M20
M16
M16
M16
M16
M16
M16
M20
M20
M20
M16
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
72
74
74
78
80
98
106
108
72
74
74
78
80
98
106
108
57
58
60
62
70
78
105
108
131
59
61
69
77
88
91
132
132
136
86
94
94
97
109
133
137
178
193
143
143
162
171
194
198
256
A1
A1
A1
A1
A2
A2
A3
A3
A1
A1
A1
A1
A2
A2
A3
A3
A1
A1
A1
A2
A2
A3
A3
A3
B1
A1
A2
A2
A3
A3
A3
B1
B1
B1
A2
A3
A3
A3
A3
B1
B1
C3
C4
B1
B1
C3
C3
C4
C4
C5
sh-shf4-4p60-en_f_td
89
90
ACCESSORIES
91
HOLES
DN
PN
25
Rp 1
85
10
115
16
14
16
32
Rp 1
100
13
140
16
18
16
40
Rp 1
110
14
150
19
18
16
50
Rp 2
125
16
165
24
18
16
65
Rp 2
145
16
185
23
18
16
80
Rp 3
160
17
200
27
18
16
100
Rp 4
180
18
220
31
18
16
sh-ctf-tonde-f-en_b_td
HOLES
DN
PN
65
77
145
18
185
18
16
80
90
160
20
200
18
16
100
115,5
180
22
220
18
16
sh-ctf-tonde-s-en_b_td
25
32
40
50
65
80
100
DIMENSIONS (mm)
d
29
36
44
54
69
85
105
70
82
92
107
127
142
162
fh-fla-manom-en_a_td
92
SIZE x d1 x d2
A1
A2
A3
B1
C1
C2
C3
C4
C5
D1
D2
E1
F1
G1
DIMENSIONS (mm)
DENOMINATION
B 68 x 24 x 14
B 68 x 24 x 19
B 68 x 24 x 24
B 80 x 24 x 28
B 95 x 24 x 38
B 95 x 24 x 42
B 95 x 32 x 28
B 95 x 32 x 38
B 95 x 32 x 42
B 110 x 24 x 48
B 110 x 32 x 48
B 125 x 32 x 55
B 140 x 32 x 60
B 160 x 32 x 65
d1
H7
24
24
24
24
24
24
32
32
32
24
32
32
32
32
K1
K4
l1
20
20
20
30
35
35
35
35
35
40
40
50
55
60
b1
js9
8
8
8
8
8
8
10
10
10
8
10
10
10
10
t1 0
+0.2
27,3
27,3
27,3
27,3
27,3
27,3
35,3
35,3
35,3
27,3
35,3
35,3
35,3
35,3
s1
q1
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M8
M8
M10
10
10
10
19
20
20
20
20
20
22
22
30
13
13
24
24
24
24
24
24
24
24
24
24
24
24
24
26
d2
H7
14
19
24
28
38
42
28
38
42
48
48
55
60
65
l2
20
20
20
30
35
35
35
35
35
40
40
50
55
60
b2
js9
5
6
8
8
10
12
8
10
12
14
14
16
18
18
t2 0
+0.2
16,3
21,8
27,3
31,3
41,3
45,3
31,3
41,3
45,3
51,8
51,8
59,3
64,4
69,4
s2
q2
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M8
M8
M10
8
8
8
12
15
15
15
15
15
18
18
20
22
25
shf-giunto-elastico-en_c_td
93
35
35
40
40
40
40
40
40
40
50
50
50
50
80
90
12
20
8
10
12
12
20
30
40
8
20
20
30
30
30
HOLES
l
125
125
180
155
155
180
180
155
180
226
226
304
304
360
406
l1
l2
17
17
17
20
20
17
17
20
17
21
21
25
25
26,5
30
100
100
140
100
100
140
140
100
140
140
140
210
210
-
125
125
125
178
178
254
254
311
349
12,5
12,5
20
15
15
20
20
15
20
24
24
25
25
24,5
28,5
2
2
2
3
3
2
2
3
2
3
3
3
3
2
2
10
10
14
10
10
14
14
10
14
14
14
16
16
18
22
sp-piatti-mot-shf-en_c_td
CYLINDRICAL MOTOR
SHIM (SHF)
DIMENSIONI SPESSORI
DIMENSIONS (mm)
DESIGNATION
d1
x
h
45
45
45
55
55
55
55
55
65
65
65
65
65
41
61
89
52
70
80
90
100
60
68
78
80
88
PUMP
SHIM (SHF)
d2
10
10
10
12
12
12
12
12
16
16
16
16
16
40
40
40
40
70
80
80
80
10
20
25
30
20
10
25
30
160
160
160
160
125
160
160
160
m2
25
25
25
25
15
20
20
20
110
110
110
110
95
120
120
120
14
14
14
14
14
18
18
18
16,5
16,5
16,5
16,5
37,5
42,5
42,5
42,5
sp-pompa-shf-en_b_td
sp-tondi-mot-shf-en_b_td
94
TECHNICAL
APPENDIX
95
TYPICAL APPLICA
TIONS OF SH SERIES ELECTRIC PUMPS
APPLICATIONS
Water Purification:
De-ionized water
Water Treatment
Filtration
Commercial Pools
Waste Management:
Waste treatment
Pollution control
Machine Tools:
Degreasing
Parts washing
Machine centres
Chemical treatment
Heat treatment
Medical:
Laser cooling
Medical chillers
Sanitary equipment
Vehicle Maintenance:
Car washing
Lorry of Truck wash
Wheel or tyre washing
Airplane washing
Marine:
Water on board ships
Boat design (wave machines)
Agriculture:
Irrigation
Greenhouses
Poultry Washing
Cotton humidifiers
Computers:
Washing of circuit boards
Graphics:
Film washing
Cooling of presses
Laundry:
Commercial washing
Plastics:
Extrusion machines
Temperature control
Manufacture of polymers
General Industry:
Spray Booths
Light chemical transfer
Booster systems
Fire fighting
TECHNICAL APPENDIX
96
NPSH
The maximum possible suction head for installation
depends on the value of the atmospheric pressure
(i.e. the elevation above sea level at which the pump
is installed) and the temperature of the liquid.
Water
temperature (C) 20
Suction
loss (m)
0,2 0,7
60 80
90
110
120
Elevation above
sea level (m)
500 1000 1500 2000
2500 3000
Suction
loss (m)
2,75
0,55
1,1
1,65
2,2
3,3
40
where:
hp is the absolute pressure applied to the free liquid
surface in the suction tank, expressed in m. of
liquid; hp is the quotient between the barometric
pressure and the specific weight of the liquid.
hz is the suction lift between the pump axis and the
free liquid surface in the suction tank, expressed
in m.; hz is negative when the liquid level is
lower than the pump axis.
hf is the flow resistance in the suction line and its
accessories, such as: fittings, foot valve, gate
valve, elbows, etc.
hpv is the vapour pressure of the liquid at the
operating temperature, expressed in m. of
liquid. hpv is the quotient between the Pv vapour
pressure and the liquids specific weight.
0,5 is the safety factor.
For water at 15 C
hp = Pa / = 10,33m, hpv = Pv / = 0,174m (0,01701 bar)
The Hf flow resistance in the suction line with foot
valves is ~ 1,2 m.
By substituting the parameters in formula 1 with the
numeric values above, we have:
10,33 + (-3,5) (2,5 + 0,5) + 1,2 + 0,17
from which we have: 6,8 > 4,4
The relation is therefore verified.
97
TECHNICAL APPENDIX
ps
ps
ps
bar
bar
bar
273,15
274,15
275,15
276,15
277,15
278,15
279,15
280,15
281,15
282,15
283,15
284,15
285,15
286,15
287,15
288,15
289,15
290,15
291,15
292,15
293,15
294,15
295,15
296,15
297,15
298,15
299,15
300,15
301,15
302,15
303,15
304,15
305,15
306,15
307,15
308,15
309,15
310,15
311,15
312,15
313,15
314,15
315,15
316,15
317,15
318,15
319,15
320,15
321,15
322,15
323,15
324,15
325,15
326,15
327,15
0,00611
0,00657
0,00706
0,00758
0,00813
0,00872
0,00935
0,01001
0,01072
0,01147
0,01227
0,01312
0,01401
0,01497
0,01597
0,01704
0,01817
0,01936
0,02062
0,02196
0,02337
0,24850
0,02642
0,02808
0,02982
0,03166
0,03360
0,03564
0,03778
0,04004
0,04241
0,04491
0,04753
0,05029
0,05318
0,05622
0,05940
0,06274
0,06624
0,06991
0,07375
0,07777
0,08198
0,09639
0,09100
0,09582
0,10086
0,10612
0,11162
0,11736
0,12335
0,12961
0,13613
0,14293
0,15002
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
102
104
106
108
110
112
114
116
118
328,15
329,15
330,15
331,15
332,15
333,15
334,15
335,15
336,15
337,15
338,15
339,15
340,15
341,15
342,15
343,15
344,15
345,15
346,15
347,15
348,15
349,15
350,15
351,15
352,15
353,15
354,15
355,15
356,15
357,15
358,15
359,15
360,15
361,15
362,15
363,15
364,15
365,15
366,15
367,15
368,15
369,15
370,15
371,15
372,15
373,15
375,15
377,15
379,15
381,15
383,15
385,15
387,15
389,15
391,15
0,15741
0,16511
0,17313
0,18147
0,19016
0,1992
0,2086
0,2184
0,2286
0,2391
0,2501
0,2615
0,2733
0,2856
0,2984
0,3116
0,3253
0,3396
0,3543
0,3696
0,3855
0,4019
0,4189
0,4365
0,4547
0,4736
0,4931
0,5133
0,5342
0,5557
0,5780
0,6011
0,6249
0,6495
0,6749
0,7011
0,7281
0,7561
0,7849
0,8146
0,8453
0,8769
0,9094
0,9430
0,9776
1,0133
1,0878
1,1668
1,2504
1,3390
1,4327
1,5316
1,6362
1,7465
1,8628
kg/dm3
0,9857
0,9852
0,9846
0,9842
0,9837
0,9832
0,9826
0,9821
0,9816
0,9811
0,9805
0,9799
0,9793
0,9788
0,9782
0,9777
0,9770
0,9765
0,9760
0,9753
0,9748
0,9741
0,9735
0,9729
0,9723
0,9716
0,9710
0,9704
0,9697
0,9691
0,9684
0,9678
0,9671
0,9665
0,9658
0,9652
0,9644
0,9638
0,9630
0,9624
0,9616
0,9610
0,9602
0,9596
0,9586
0,9581
0,9567
0,9552
0,9537
0,9522
0,9507
0,9491
0,9476
0,9460
0,9445
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
kg/dm3
0,9998
0,9999
0,9999
0,9999
1,0000
1,0000
1,0000
0,9999
0,9999
0,9998
0,9997
0,9997
0,9996
0,9994
0,9993
0,9992
0,9990
0,9988
0,9987
0,9985
0,9983
0,9981
0,9978
0,9976
0,9974
0,9971
0,9968
0,9966
0,9963
0,9960
0,9957
0,9954
0,9951
0,9947
0,9944
0,9940
0,9937
0,9933
0,9930
0,9927
0,9923
0,9919
0,9915
0,9911
0,9907
0,9902
0,9898
0,9894
0,9889
0,9884
0,9880
0,9876
0,9871
0,9862
0,9862
120
122
124
126
128
130
132
134
136
138
140
145
155
160
165
170
175
180
185
190
195
200
205
210
215
220
225
230
235
240
245
250
255
260
265
270
275
280
285
290
295
300
305
310
315
320
325
330
340
350
360
370
374,15
393,15
395,15
397,15
399,15
401,15
403,15
405,15
407,15
409,15
411,15
413,15
418,15
428,15
433,15
438,15
433,15
448,15
453,15
458,15
463,15
468,15
473,15
478,15
483,15
488,15
493,15
498,15
503,15
508,15
513,15
518,15
523,15
528,15
533,15
538,15
543,15
548,15
553,15
558,15
563,15
568,15
573,15
578,15
583,15
588,15
593,15
598,15
603,15
613,15
623,15
633,15
643,15
647,30
1,9854
2,1145
2,2504
2,3933
2,5435
2,7013
2,867
3,041
3,223
3,414
3,614
4,155
5,433
6,181
7,008
7,920
8,924
10,027
11,233
12,551
13,987
15,550
17,243
19,077
21,060
23,198
25,501
27,976
30,632
33,478
36,523
39,776
43,246
46,943
50,877
55,058
59,496
64,202
69,186
74,461
80,037
85,927
92,144
98,70
105,61
112,89
120,56
128,63
146,05
165,35
186,75
210,54
221,20
kg/dm3
0,9429
0,9412
0,9396
0,9379
0,9362
0,9346
0,9328
0,9311
0,9294
0,9276
0,9258
0,9214
0,9121
0,9073
0,9024
0,8973
0,8921
0,8869
0,8815
0,8760
0,8704
0,8647
0,8588
0,8528
0,8467
0,8403
0,8339
0,8273
0,8205
0,8136
0,8065
0,7992
0,7916
0,7839
0,7759
0,7678
0,7593
0,7505
0,7415
0,7321
0,7223
0,7122
0,7017
0,6906
0,6791
0,6669
0,6541
0,6404
0,6102
0,5743
0,5275
0,4518
0,3154
G-at_npsh_a_sc
TECHNICAL APPENDIX
98
10
0,9
15
1,2
20
1,5
25
1,8
30
2,1
35
2,4
40
50
3,6
60
4,2
70
4,8
80
5,4
90
100
7,5
125
150
10,5
175
12
200
15
250
18
300
24
400
30
500
36
600
42
700
48
800
54
900
60
1000
75
1250
90
1500
105
1750
120
2000
150
2500
180
3000
210
3500
240
4000
300
5000
360
6000
420
7000
480
8000
540
9000
600
10000
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
v
hr
15
1/2"
20
3/4"
25
1"
32
1 1/4"
40
1 1/2"
0,94
16
1,42
33,9
1,89
57,7
2,36
87,2
2,83
122
3,30
162
0,53
3,94
0,80
8,35
1,06
14,21
1,33
21,5
1,59
30,1
1,86
40,0
2,12
51,2
2,65
77,4
3,18
108
3,72
144
4,25
185
0,34
1,33
0,51
2,82
0,68
4,79
0,85
7,24
1,02
10,1
1,19
13,5
1,36
17,3
1,70
26,1
2,04
36,6
2,38
48,7
2,72
62,3
3,06
77,5
3,40
94,1
4,25
142
0,21
0,40
0,31
0,85
0,41
1,44
0,52
2,18
0,62
3,05
0,73
4,06
0,83
5,19
1,04
7,85
1,24
11,0
1,45
14,6
1,66
18,7
1,87
23,3
2,07
28,3
2,59
42,8
3,11
59,9
3,63
79,7
4,15
102
5,18
154
0,13
0,13
0,20
0,29
0,27
0,49
0,33
0,73
0,40
1,03
0,46
1,37
0,53
1,75
0,66
2,65
0,80
3,71
0,93
4,93
1,06
6,32
1,19
7,85
1,33
9,54
1,66
14,4
1,99
20,2
2,32
26,9
2,65
34,4
3,32
52,0
3,98
72,8
5,31
124
6,63
187
50
2
0,17
0,16
0,21
0,25
0,25
0,35
0,30
0,46
0,34
0,59
0,42
0,89
0,51
1,25
0,59
1,66
0,68
2,13
0,76
2,65
0,85
3,22
1,06
4,86
1,27
6,82
1,49
9,07
1,70
11,6
2,12
17,5
2,55
24,6
3,40
41,8
4,25
63,2
5,10
88,6
5,94
118
6,79
151
7,64
188
200
8"
250
10"
300
12"
350
14"
400
16"
0,53
0,27
0,66
0,40
0,80
0,56
0,93
0,75
1,06
0,96
1,33
1,45
1,59
2,03
1,86
2,71
2,12
3,46
2,65
5,23
3,18
7,33
3,72
9,75
4,25
12,49
4,78
15,5
5,31
18,9
0,68
0,32
0,85
0,49
1,02
0,69
1,19
0,91
1,36
1,17
1,70
1,77
2,04
2,47
2,38
3,29
2,72
4,21
3,06
5,24
3,40
6,36
0,71
0,28
0,83
0,38
0,94
0,48
1,18
0,73
1,42
1,02
1,65
1,35
1,89
1,73
2,12
2,16
2,36
2,62
1,21
0,64
1,39
0,82
1,56
1,02
1,73
1,24
1,19
0,53
1,33
0,65
0,20
0,16
0,25
0,25
0,30
0,35
0,35
0,46
0,40
0,59
0,45
0,74
0,50
0,90
0,63
1,36
0,75
1,90
0,88
2,53
1,01
3,23
1,26
4,89
1,51
6,85
2,01
11,66
2,51
17,6
3,02
24,7
3,52
32,8
4,02
42,0
4,52
52,3
5,03
63,5
6,28
96,0
7,54
134
8,79
179
0,30
0,27
0,33
0,33
0,41
0,49
0,50
0,69
0,58
0,92
0,66
1,18
0,83
1,78
1,00
2,49
1,33
4,24
1,66
6,41
1,99
8,98
2,32
11,9
2,65
15,3
2,99
19,0
3,32
23,1
4,15
34,9
4,98
48,9
5,81
65,1
6,63
83,3
8,29
126
0,32
0,23
0,37
0,31
0,42
0,40
0,53
0,60
0,64
0,84
0,85
1,43
1,06
2,16
1,27
3,03
1,49
4,03
1,70
5,16
1,91
6,41
2,12
7,79
2,65
11,8
3,18
16,5
3,72
21,9
4,25
28,1
5,31
42,5
6,37
59,5
7,43
79,1
8,49
101
0,34
0,20
0,41
0,28
0,54
0,48
0,68
0,73
0,82
1,02
0,95
1,36
1,09
1,74
1,22
2,16
1,36
2,63
1,70
3,97
2,04
5,57
2,38
7,40
2,72
9,48
3,40
14,3
4,08
20,1
4,76
26,7
5,44
34,2
6,79
51,6
8,15
72,3
0,38
0,20
0,47
0,30
0,57
0,42
0,66
0,56
0,75
0,72
0,85
0,89
0,94
1,08
1,18
1,63
1,42
2,29
1,65
3,05
1,89
3,90
2,36
5,89
2,83
8,26
3,30
11,0
3,77
14,1
4,72
21,2
5,66
29,8
6,61
39,6
7,55
50,7
8,49
63,0
0,42
0,20
0,49
0,26
0,55
0,34
0,62
0,42
0,69
0,51
0,87
0,77
1,04
1,08
1,21
1,44
1,39
1,84
1,73
2,78
2,08
3,90
2,43
5,18
2,77
6,64
3,47
10,0
4,16
14,1
4,85
18,7
5,55
23,9
6,24
29,8
6,93
36,2
G-at-pct_a_th
99
TECHNICAL APPENDIX
FLOW RESISTANCE
ACCESSORY
TYPE
25
32
40
50
45 bend
90 bend
90 smooth bend
Union tee or cross
Gate
Non return valve
0,2
0,4
0,4
1,1
1,1
0,2
0,6
0,4
1,3
1,5
0,4
0,9
0,4
1,7
1,9
0,4
1,1
0,6
2,1
0,2
2,4
65
80
100
125
Equivalent pipeline length (m)
0,6
0,6
0,9
1,1
1,3
1,5
2,1
2,6
0,9
1,1
1,3
1,7
2,6
3,2
4,3
5,3
0,2
0,2
0,4
0,4
3,0
3,4
4,7
5,9
150
200
250
300
1,5
3,0
1,9
6,4
0,6
7,4
1,9
3,9
2,8
7,5
0,9
9,6
2,4
4,7
3,4
10,7
1,1
11,8
2,8
5,8
3,9
12,8
1,3
13,9
G-a-pcv_a_th
The table is valid for the Hazen Williams coefficient C = 100 (cast iron pipework). For steel pipework, multiply the
values by 1.41. For stainless steel, copper and coated cast iron pipework, multiply the values by 1.85.
When the equivalent pipeline length has been determined, the flow resistance is obtained from the table of
flow resistance.
The values given are guideline values which are bound to vary slightly according to the model, especially for gate
valves and non-return valves, for which it is a good idea to check the values supplied by the manufacturers.
TECHNICAL APPENDIX
100
V
OL
UMETRIC
CAP
ACITY
OLUMETRIC
CAPACITY
VOLUMETRIC
CAPACITY
Litres
Cubic metres
Cubic feet
Cubic feet
Imp. gal.
US gal.
per minute
per hour
per hour
per minute
per minute
per minute
l/min
m3/h
ft3/h
0,0600
1,0000
0,0283
1,6990
0,2728
0,2271
1,0000
16,6667
0,4719
28,3168
4,5461
3,7854
ft3/min
0,0353
0,5886
0,0167
1,0000
0,1605
0,1337
Imp. gal/min
0,2200
3,6662
0,1038
6,2288
1,0000
0,8327
Us gal./min
0,2642
4,4029
0,1247
7,4805
1,2009
1,0000
metre
of water
m H 2O
1.02 x 10-4
0,1020
10,1972
0,7031
1,0000
0,0136
millimetre of
mercury
mm Hg
0,0075
7,5006
750,0638
51,7151
73,5561
1,0000
2,1189
35,3147
1,0000
60,0000
9,6326
8,0208
PRESSURE
AND
HEAD
SURE
AND
HEAD
PRESSURE
PRES
Newton per
square metre
N/m2
1,0000
1000,0000
1 x 105
6894,7570
9806,6500
133,3220
kilo Pascal
bar
kPa
bar
1 x 10-5
0,0100
1,0000
0,0689
0,0981
0,0013
0,0010
1,0000
100,0000
6,8948
9,8067
0,1333
LENGTH
TH
LENGTH
LENG
millimetre
centimetre
metre
inch
foot
yard
mm
cm
in
ft
yd
1,0000
10,0000
1000,0000
25,4000
304,8000
914,4000
0,1000
1,0000
100,0000
2,5400
30,4800
91,4400
0,0010
0,0100
1,0000
0,0254
0,3048
0,9144
0,0394
0,3937
39,3701
1,0000
12,0000
36,0000
0,0011
0,0033
0,0328
3,2808
0,0833
1,0000
3,0000
0,0109
1,0936
0,0278
0,3333
1,0000
VOLUME
OL
UME
OLUME
V
cubic metre
m
1,0000
0,0010
1 x 10-6
0,0045
0,0038
0,0283
litre
millilitre
imp. Gallon
US gallon
cubic foot
litro
ml
imp. gal.
US gal.
ft3
1000,0000
1,0000
0,0010
4,5461
3,7854
28,3168
1 x 106
1000,0000
1,0000
4546,0870
3785,4120
28316,8466
219,9694
0,2200
2.2 x 10-4
1,0000
0,8327
6,2288
264,1720
0,2642
2.642 x 10-4
1,2009
1,0000
7,4805
35,3147
0,0353
3.53 x 10-5
0,1605
0,1337
1,0000
G-at_pp-en_a_sc
101
TECHNICAL APPENDIX
Xylect is pump solution selection software with an extensive online database of product information across the entire
Lowara, and Vogel range of pumps and related products, with multiple search options and helpful project management
facilities. The system holds up-to-date product information on thousands of products and accessories.
The possibility to search by applications and the detailed information output given makes it easy to make the optimal
selection without having detailed knowledge about the Lowara and Vogel products.
Application
Product type
Duty point
Motor data
Dimensional drawings
Options
TECHNICAL APPENDIX
102
The detailed output makes it easy to select the optimal pump from the given alternatives.
103
TECHNICAL APPENDIX
Xylem
1) The tissue in plants that brings water upward from the roots;
2) a leading global water technology company.
Were 12,000 people unied in a common purpose: creating innovative solutions
to meet our worlds water needs. Developing new technologies that will improve
the way water is used, conserved, and re-used in the future is central to our work.
We move, treat, analyze, and return water to the environment, and we help people
use water efciently, in their homes, buildings, factories and farms. In more than 150
countries, we have strong, long-standing relationships with customers who know us
for our powerful combination of leading product brands and applications expertise,
backed by a legacy of innovation.
For more information on how Xylem can help you, go to xyleminc.com.
Headquarters
LOWARA S.r.l. Unipersonale
Via Vittorio Lombardi 14
36075 Montecchio Maggiore - Vicenza - Italy
Tel.(+39) 0444 707111 - Fax(+39) 0444 492166
e-mail: lowara.mkt@xyleminc.com
web: www.lowara.com - www.completewatersystems.com
LOWARA reserves the right to make modication without prior notice.
LOWARA is a trademark of Xylem Inc. or one of its subsidiaries.