An important application of softcopy stereoplotters, which relies upon
digital image matching, is the automatic production of digital elevation
models. In this process, a set of image point is selected from the left image and subsequently matched with corresponding points in the right image. The set of selected points is typically arranged in a nominal grid pattern, which results in a nearly uniform regular grid DEM (see Sec. 13-6). In general, the resulting DEM will differ somewhat from a perfectly regular grid due to tilt and relief displacements which exist in the images Sebuah aplikasi penting dari komplotan stereo softcopy, yang bergantung pada pencocokan gambar digital, adalah produksi otomatis model elevasi digital. Dalam proses ini, satu set titik gambar dipilih dari gambar kiri dan kemudian dicocokkan dengan poin yang sesuai pada gambar yang tepat. Himpunan titik-titik yang dipilih biasanya diatur dalam pola grid nominal, yang menghasilkan kotak biasa DEM hampir seragam (lihat Sec. 13-6). Secara umum, DEM yang dihasilkan akan agak berbeda dari kotak biasa sempurna karena tilt dan bantuan perpindahan yang ada di gambar Figure 15-10 is an illustration of the positions of DEM points within the overlap area of a stereo pair of images. A boundary is chosen for the region in which the DEM points will be selected. The grid of selected points within the region on the left image is arranged at spacing of d, and d, in the x and y directions. respectively. Each of these points is matched with corresponding points from the right image, using image matching techniques as discussed in the preceding section. Since the ground is generally not flat, the x parallax of DEM points will not be constant. As can be seen in Fig. 15-10, this varying x parallax causes the pattern of corresponding points from the right image to differ from a perfect grid arrangement Gambar 15-10 adalah ilustrasi posisi poin DEM dalam tumpang tindih daerah sepasang stereo gambar. Sebuah batas dipilih untuk wilayah di mana poin DEM akan dipilih. Grid titik yang dipilih di kawasan ini pada gambar sebelah kiri diatur di jarak d, dan d, dalam arah x dan y. masing-masing. Masing-masing poin cocok dengan poin yang sesuai dari gambar yang tepat, menggunakan teknik pencocokan gambar seperti yang dibahas di bagian sebelumnya. Karena tanah umumnya tidak datar, x paralaks poin DEM tidak akan konstan. Seperti dapat dilihat pada Gambar. 15-10, ini bervariasi x parallax menyebabkan pola poin yang sesuai dari citra yang tepat untuk berbeda dari pengaturan jaringan yang sempurna Once the full set of DEM points has been matched and their object space coordinates calculated, their three-dimensional positions in the stereomodel can be represented by a set of floating marks superimposed upon the terrain. If desired, the plotter operator can then view these points in stereo. one at a time, and adjust the positions of points which do not appear to rest on the terrain. When the operator is satisfied with all vertical positions, the resulting DEM can be stored in a computer file. This DEM is
then available for additional operations such as automatic contouring or the
production of digital orthophotos, as discussed next. Setelah set lengkap poin DEM telah dicocokkan dan ruang objek mereka koordinat dihitung, posisi tiga dimensi dalam stereomodel dapat diwakili oleh satu set tanda mengambang ditumpangkan pada medan. Jika diinginkan, operator plotter kemudian dapat melihat titik-titik ini dalam stereo. satu per satu, dan menyesuaikan posisi titik yang tidak muncul untuk beristirahat di medan. Ketika operator puas dengan semua posisi vertikal, DEM yang dihasilkan dapat disimpan dalam file komputer. DEM ini kemudian tersedia untuk operasi tambahan seperti contouring otomatis atau produksi orthophotos digital, seperti yang dibahas selanjutnya.