Page
3
4
5
6-7
8-9
10-11
12
13
14-15
16-17
18-19
20-21
22-23
24
25
26-27
28-29
Compact Manual
Rewind Reels
30-31
32-33
34-35
Page
5
8
10
12
1"1-1/2"
25
Storage Reels
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
Complete Reel Packages are also available. For further information refer to our form H-0001-Pkg.
Hose Assemblies
Hannay offers a wide selection of low, medium, and high pressure hose assemblies for a variety of applications such
as general purpose air and water, petroleum products, hydraulics, oxygen/acetylene, breathing air, potable water,
steam, and pressure washing. These assemblies are available with inside diameters ranging from 3/16" to 3", working pressures from 100 psi to 10,000 psi (7 bar to 689 bar), working temperatures from -65 F to +450 F (-54 C to
+232 C), and in most cases at least a 4:1 burst pressure ratio. Hannay also offers 24" flexible connectors for most
reels. Please contact our factory with your specific need.
Note: All spring rewind reels complete with hose are supplied with appropriate hose stop.
(See Ordering & Accessory Guide.)
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com
reels@hannay.com
Paint Notice
To meet the requirements and performance of vehicle and OEM apparatus paints we recommend our reels be painted
with the same or equal paint as used on the specific apparatus the reel is being mounted on.
Hannay Reels will supply any model or custom reel or part with an automotive primer or rust preventative oil finish
upon request, allowing application of final coating at your facility. Or at additional cost Hannay can prime / pre-paint
all material before final assembly.
In today's regulatory environment this would be the most cost-effective way to meet your finishing standards.
Optional finishes are available for various environmental conditions and should be discussed with the factory.
Standard finish is oven cured enamel. High performance finishes for demanding and corrosive environments are available at an additional cost. Consult factory for specific requirements.
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
Standard
Configuration
Shown
For:
Chassis Grease
Hydraulics
Air/Water
N515-14-16-8C
N515-16-17C
N515-19-20J
N515-23-24J
1/4"
6
5/8"
16
25
8
35
11
50
15
75
23
3/8"
10
3/4"
19
25
8
35
11
50
15
75
23
Approx.Weight
lb.
kg.
NET
48*
22
51*
23
63*
29
75*
34
Standard
Roller
Assy
Frt.
SHIP
Wt.
83
38
86
39
98
44
110
50
Reel Dimensions***
inches
mm.
N203
N203
N203
N203
Notes:
VR (OPT)
8
203
10.5
267
10.5
267
15.5
394
17.62
448
18.5
470
20.75
527
23.75
603
16.25
413
17
432
20
508
24
610
9.12
232
9.12
232
10.62
270
12.62
321
B
3
76
SR (STD)
G
H
TR (OPT)
X
7
178
A
9
229
F
10.12
257
Y
10
254
D
12
305
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com
reels@hannay.com
SPRING REWIND
DUAL HOSE REELS
Optional
TR roller
position
shown
For:
Hydraulics
Air/Water
Spray Painting
N615-19-20C
N617-19-20J
N615-23-24B
N617-25-26-15.5B
N617-25-26-15.5A
1/4"
6
5/8"
16
2/35
2/11
2/50
2/15
2/65
2/20
2/75
2/23
2/100
2/31
3/8"
10
3/4"
19
2/35
2/11
2/50
2/15
2/60
2/18
2/75
2/23
2/85
2/26
NET
SHIP
63
28.6
66
29.9
87
39.5
93
42.2
120
54.4
78*
35.4
86*
39
104*
47.2
128
58.1
155
70.3
N203
N205
N203
N205
N205
Reel Dimensions***
inches
mm.
9
229
11
279
9
229
11
279
11
279
3
76
5
127
3
76
5
127
5
127
10.5
267
10.5
267
10.5
267
15.5
394
15.5
394
20.75
527
20.75
527
23.75
603
25.25
641
25.25
641
11.75
298
13.75
349
11.75
298
13.75
349
14.5
368
20
508
20
508
24
610
26
660
26
660
10.62
270
10.62
270
12.62
321
13.62
346
13.62
346
7
178
9
229
7
178
9
229
9
229
Notes:
G
H
X
A
F
SR (STD)
VR (OPT)
Y
10
254
D
12
305
TR (OPT)
For hydraulic tool circuit applications full flow swivels w/viton seals are recommended (add 2.25 to F dim in chart)
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
SPRING REWIND
DUAL HOSE REELS
Standard
Configuration
Shown
For:
Hydraulics
Air/Water
Spray Painting
617-25-26-15.5B
617-25-26-15.5A
618-30-31-15.5A
1/4"
6
5/8"
16
2/75
2/23
2/100
2/31
3/8"
10
3/4"
19
2/75
2/23
2/85
2/26
1/2"
13
7/8"
22
2/50
2/15
2/100
2/31
2/50
2/15
NET
SHIP
93
42.2
120
54.4
130
59
128
58.1
155
70.3
165
74.8
R205
R205
R206
Reel Dimensions***
inches
mm.
10.25
260
10.25
260
11.25
286
5
127
5
127
6
152
15.5
394
15.5
394
15.5
394
25
635
25
635
28.5
724
26.12
663
26.12
663
29.62
752
15.0
381
15.75
400
21.75
552
25.88
657
25.88
657
31.38
797
13.5
343
13.5
343
17
432
5.5
140
5.5
140
6.5
165
22
559
22
559
25.5
648
Notes:
SR (STD)
VR (OPT)
G
H
TR (OPT)
For hydraulic tool circuit applications full flow swivels w/viton seals are recommended (add 2.25 to F dim in chart)
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com
reels@hannay.com
Shown with
Optional TR
Roller Position
Washdown
Air Tools
General Industrial
Applications
Air/Water
Assembly Operations
N716-14-16-8C
N716-16-17C
N716-19-20J
N716-23-24-15.5G
N716-23-24-15.5J
N716-25-26-15.5B
N718-25-26-15.5G
Approx. Weight
lb.
kg.
1/4"
6
5/8"
16
100
30
3/8"
10
3/4"
19
25
8
35
11
50
15
75
23
65
20
75
23
1/2"
13
7/8"
22
25
8
35
11
50
15
65
20
65
20
75
23
100
30
100
30
52*
24
55*
25
64*
29
94*
43
79*
36
90
41
Frt.
SHIP
Wt.
70
39
71
32
85
38
129
59
96
44
125
57
96
44
131
59
NET
Standard
Roller
Assy
Reel Dimensions***
inches
mm.
N204
N204
N204
N204
N204
N204
N206
10
254
10
254
10
254
10
254
10
254
10
254
4
102
4
102
4
102
4
102
4
102
4
102
8
203
10.5
267
10.5
267
15.5
394
15.5
394
15.5
394
17.62
448
18.5
470
20.75
527
23.75
603
23.75
603
25.25
641
11.25
286
11.25
286
11.25
286
11.25
286
11.25
286
11.25
286
16.25
413
17
432
20
508
24
610
24
610
26
660
9.12
232
9.12
232
10.62
270
12.62
321
12.62
321
13.62
346
8
203
8
203
8
203
8
203
8
203
8
203
12
305
6
152
15.5
394
25.25
641
13.25
337
26
660
13.62
346
10
254
Notes:
1. Specifications subject to change.
2. Reel models and capacities shown are for standard drag
applications; for vertical lift applications consult factory.
3. Other sizes, from standard components, available on request.
4. Finish: refer to Page 4.
5. Be sure to check dimensions and weights prior to
ordering.
NOTICE: A Flexible Connector must be used between the inlet pipe
and the inlet swivel joint.
* When shipped as a parcel package (via Fed-Ex or UPS Ground).
Net wt. plus carton wt.
*** x,y indicate mounting holes. See page 2
G
H
X
A
F
SR (STD)
VR (OPT)
Y
10
254
D
12
305
TR (OPT)
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
For:
Lubrication
Air/Water
Assembly Operations
Parts Drawing ISO 66
Model
Number
716-25-26-15.5B
718-25-26-15.5G
718-30-31-20D
Standard
Configuration
Shown
Washdown
Air Tools
General Industrial
Applications
Approx. Weight
lb.
kg.
3/8"
10
3/4"
19
1/2"
13
7/8"
22
75
23
100
30
150
46
Standard
Roller
Assy
NET
Frt.
SHIP
Wt.
75
23
100
30
90
41
96
44
125
57
131
59
R204
125
38
127
58
162
73
R206
R206
Reel Dimensions***
inches
mm.
9.25
235
11.25
286
4
102
6
152
15.5
394
15.5
394
25
635
25
635
26.12
663
26.12
663
12.75
324
14.75
375
25.88
657
25.88
657
13.5
343
13.5
343
4.5
114
6.5
165
22
559
22
559
11.25
286
6
152
20
508
28.5
724
29.62
752
15.5
394
31.38
797
17
432
6.5
165
25.5
648
Notes:
G
H
SR (STD)
VR (OPT)
Y
D
TR (OPT)
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com
reels@hannay.com
Optional
TR roller
position
shown
For:
Fuel Dispensing
(Consult Factory)
Model
Number
I.D. (in)
I.D. (mm)
O.D. (in)
O.D. (mm)
N816-19-20J
N818-23-24J
N816-25-26B
N818-25-26B
Approx. Weight
lb.
kg.
3/4"
19
1-9/32"
33
25
8
50
15
1"
25
1-9/16"
40
15
5
25
8
60
18
70
21
35
11
50
15
Standard
Roller
Assy
NET
SHIP
75
34
87
39
91*
41
100
45
N204
96
44
102
46
131
59
137
62
N204
N206
N206
Reel Dimensions***
in.
mm
10
254
12
305
4
102
6
152
10.5
267
10.5
267
20.75
527
23.75
603
13
330
15
381
20
508
24
610
10.62
270
12.62
321
8
203
10
254
10
254
12
305
4
102
6
152
10.5
267
10.5
267
25.25
641
25.25
641
13
330
15
381
26
660
26
660
13.62
346
13.62
346
8
203
10
254
Notes:
G
H
X
A
F
SR (STD)
VR (OPT)
TR (OPT)
Y
10
254
D
12
305
10
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
Standard
Configuration
Shown
For:
Fuel Dispensing
(Consult Factory)
Model
Number
I.D. (in)
I.D. (mm)
O.D. (in)
O.D. (mm)
816-25-26B
818-25-26B
820-25-26-10.5A
820-30-31-10.5A
820-30-31-15.5A
Approx. Weight
lb.
kg.
3/4"
19
1-9/32"
33
1"
25
1-9/16"
40
60
18
70
21
85
26
100
30
Standard
Roller
Assy
NET
SHIP
35
11
50
15
75
23
96
44
102
46
131
59
131
59
137
62
166
75
R204
100
30
137
62
145
66
172
78
180
82
R308
R206
R308
R308
Reel Dimensions***
in.
mm
9.25
235
11.25
286
13.25
337
4
102
6
152
8
203
10.5
267
10.5
267
10.5
267
25
635
25
635
25
635
26.12
663
26.12
663
27
686
13.5
343
15.5
394
18.25
464
25.88
657
25.88
657
25.88
657
13.5
343
13.5
343
13.5
343
4.5
114
6.5
165
8.5
216
22
559
22
559
22
559
13.25
337
13.25
337
8
203
8
203
10.5
267
15.5
394
28.5
724
28.5
724
30.5
775
30.5
775
18.25
464
18.25
464
31.38
797
31.38
797
17
432
17
432
8.5
216
8.5
216
25.5
648
25.5
648
Notes:
G
H
D
F
SR (STD)
VR (OPT)
TR (OPT)
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com
reels@hannay.com
11
Standard
Configuration
Shown
For:
Bulk Transfer
Fuel Dispensing
Suction/Discharge
(Consult Factory)
(Consult Factory)
922-23-24B
920-25-26A
922-30-31A
1-1/4"
32
1-13/16"
46
40
12
50
15
75
23
1-1/2"
38
2-1/16"
52
25
8
40
12
50
15
Weight
lb.
kg.
Standard
Roller
Assy
NET
SHIP
104
47
127
58
156
71
139
63
162
73
191
87
R310
R308
R310
Reel Dimensions***
inches
mm.
15.25
387
13.25
337
15.25
387
10
254
8
203
10
254
23.25
591
25
635
28.5
724
25.25
641
27
686
30.5
775
24
610
22.75
578
24.75
629
23.88
607
25.88
657
31.38
797
12.5
318
13.5
343
17
432
10.5
267
8.5
216
10.5
267
20.25
514
22
559
25.5
648
Notes:
1. Specifications subject to change.
2. Reel models and capacities shown are for standard drag
applications; for vertical lift applications consult factory.
3. Other sizes, from standard components, available on request.
4. Finish: refer to Page 4.
5. Be sure to check dimensions and weights prior to
ordering.
NOTICE: A Flexible Connector must be used between the inlet pipe
and the inlet swivel joint.
*** x,y indicate mounting holes. See page 2
C
10.5
267
G
H
D
F
SR (STD)
VR (OPT)
TR (OPT)
12
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
COMPACT MANUAL
REWIND REELS
Standard
Configuration
Shown
For:
Pressure Washing
Spray Operations
Washdown
Air
1014-14-16
1016-14-16
1020-14-16
1/4"
6
5/8"
16
100
31
150
46
250
76
Approx. Weight
Crank Rewind
lb.
kg.
3/8"
10
3/4"
19
75
23
100
31
175
53
Reel Dimensions***
inches
mm.
NET
SHIP
23
10
24
11
25
11
30*
14
30*
14
30*
14
8.12
206
10.12
257
14.12
359
6
152
8
203
12
305
19
483
21
533
25
635
4
102
6
152
10
254
Notes:
1. Specifications subject to change.
2. Other sizes, from standard components, available on request.
3. Finish: refer to Page 4.
4. Be sure to check dimensions and weights prior to
ordering.
NOTICE: A Flexible Connector must be used between the inlet pipe
and the inlet swivel joint.
* When shipped as a parcel package (via Fed-Ex or UPS Ground).
*** x,y indicate mounting holes. See page 2
C
6
152
G
15.75
400
H
8.75
222
X
A
F
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com
E
14
356
reels@hannay.com
Y
5.12
130
D
6
152
13
MANUAL OR POWER
REWIND REELS
Electric Rewind
Standard Configuration Shown
For:
Lawn Care
Pest Control
Pressure Washing
Agriculture
Steam Cleaning
Optional External
Mounting Brackets part
no. 9906.0025.
Add 2-1/2" to the X
dimensions shown in
the chart.
Approx. Weight
Crank Rewind 3
lb.
kg.
1/4"
6
5/8"
16
175
53
350
107
500
152
3/8"
10
3/4"
19
125
38
275
84
400
122
500
152
1/2"
13
7/8"
22
75
23
175
53
300
91
375
114
5/8"
16
1"
25
50
15
125
38
200
61
275
84
475
145
350
107
NET
SHIP
27
12
29
13
31
14
33
15
50*
23
50*
23
50*
23
50*
23
11
279
17
432
23
584
27
686
35
16
50*
23
33
838
Notes:
1. Specifications subject to change.
2. Upon request, reels can be supplied with drum lengths other than shown.
3. Weights shown in chart are for crank rewind models. ADD these amounts for
power rewind models:
Net (lbs.)
Ship (lbs.)
Net (kg.)
Ship (kg.)
Electric
18
18
8.2
8.2
Hydraulic
15
15
6.8
6.8
Air
15
15
6.8
6.8
4. Dimension F" is the overall length of standard model reels.
5. When ordering power rewind models, prefix model number with:
A = Air Rewind
E = Electric Rewind
HD = Hydraulic Rewind
(Air rewind reels are supplied with control valve and hose; 12v and 24v DC
rewind reels are supplied with switch and solenoid; 115v AC rewind reels are
not supplied with switch but can be ordered separately; hydraulic rewind reels
are not supplied with control valve.)
6. Manual rewind available in RT or LB configuations only.
7. Finish: refer to Page 4.
8. Be sure to check dimensions and weights prior to ordering.
9. Some roller options may prohibit the use of our molded chain guard.
14
Reel Dimensions***
inches
mm.
6
152
12
305
18
457
22
559
E
CRANK
16.5
419
16.5
419
16.5
419
16.5
419
E
POWER
19
483
19
483
19
483
19
483
F
CRANK
19
483
25
635
31
787
35
889
F
POWER
16.5
419
22.5
572
28.5
724
32.5
826
9.5
241
15.5
394
21.5
546
25.5
648
28
711
16.5
419
19
483
41
1041
38.5
978
31.5
800
E
C
6
153
G
18.12
460
H
9.88
251
Y
10
254
D
14.5
368
X
A
F
NOTICE: A Flexible Connector must be used between the inlet pipe and the
inlet swivel joint.
* When shipped as a parcel package (via Fed-Ex or UPS Ground).
*** x,y indicate mounting holes. See page 2
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
MANUAL OR POWER
REWIND REELS
To handle single 5/8" or 3/4" I.D. hose.
For:
Air Compressors
Washdown
Electric Rewind
Standard Configuration
Shown
Optional External
Mounting Brackets part
no. 9906.0025.
Add 2-1/2" to the X
dimensions shown in
the chart.
Approx. Weight
Crank Rewind 3
lb.
kg.
5/8"
16
1"
25
75
23
150
46
200
61
275
84
3/4"
19
1-9/32"
40
50
15
100
30
125
38
150
46
350
107
200
61
Reel Dimensions***
inches
mm.
NET
SHIP
28
13
30
14
32
15
33
15
50*
23
50*
23
50*
23
50*
23
13
330
19
483
23
584
27
686
36
16
50*
23
33
838
Notes:
1. Specifications subject to change.
2. Upon request, reels can be supplied with drum lengths other than shown.
3. Weights shown in chart are for crank rewind models. ADD these amounts for
power rewind models:
Net (lbs.)
Ship (lbs.)
Net (kg.)
Ship (kg.)
Electric
18
18
8.2
8.2
Hydraulic
15
15
6.8
6.8
Air
15
15
6.8
6.8
4. Dimension F" is the overall length of standard model reels.
5. When ordering power rewind models, prefix model number with:
A = Air Rewind
E = Electric Rewind
HD = Hydraulic Rewind
(Air rewind reels are supplied with control valve and hose; 12v and 24v DC
rewind reels are supplied with switch and solenoid; 115v AC rewind reels are
not supplied with switch but can be ordered separately; hydraulic rewind reels
are not supplied with control valve.)
6. Manual rewind available in RT or LB configuations only.
7. Finish: refer to Page 4.
8. Be sure to check dimensions and weights prior to ordering.
9. Some roller options may prohibit the use of our molded chain guard.
8
203
14
356
18
457
22
559
E
CRANK
16.5
419
16.5
419
16.5
419
16.5
419
E
POWER
19
483
19
483
19
483
19
483
F
CRANK
23.38
594
29.38
746
33.38
848
37.38
950
F
POWER
18.5
470
24.5
622
28.5
724
32.5
826
X
11.5
292
17.5
445
21.5
546
25.5
648
28
711
16.5
419
19
483
43.38
1102
38.5
978
31.5
800
C
6
152
G
18.12
460
H
9.88
251
Y
10
254
X
A
D
14.5
368
NOTICE: A Flexible Connector must be used between the inlet pipe and the
inlet swivel joint.
* When shipped as a parcel package (via Fed-Ex or UPS Ground).
*** x,y indicate mounting holes. See page 2
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com
reels@hannay.com
15
MANUAL OR POWER
REWIND REELS
Standard
Configuration
Shown
Spray Painting
Optional External
Mounting Brackets part
no. 9906.0025.
Add 2-1/2" to the X
dimensions shown in
the chart.
Approx. Weight
Crank Rewind 3
lb.
kg.
NET
1/4"
3/8"
1/2"
2/100
2/31
2/175
2/53
2/275
2/84
2/350
2/107
2/425
2/130
2/75
2/23
2/125
2/38
2/200
2/61
2/250
2/76
2/300
2/91
2/50
2/15
2/75
2/23
2/125
2/38
2/175
2/53
2/225
2.69
32
15
34
15
36
16
37
17
39
18
SHIP
50*
23
50*
23
50*
23
50*
23
50
23
Notes:
13
330
17
432
23
584
27
686
33
838
8
203
12
305
18
457
22
559
28
711
E
CRANK
18.5
470
18.5
470
18.5
470
18.5
470
18.5
470
E
POWER
19
483
19
483
19
483
19
483
19
483
F
CRANK
21
533
25
635
31
787
35
889
41
1041
F
POWER
20.75
527
24.75
629
30.75
781
34.75
883
40.75
1035
X
11.5
292
15.5
394
21.5
546
25.5
648
31.5
800
16
Reel Dimensions***
inches
mm.
C
6
152
G
18.12
460
H
9.88
251
Y
10
254
X
A
F
D
14.5
368
NOTICE: A Flexible Connector must be used between the inlet pipe and
the inlet swivel joint.
* When shipped as a parcel package (via Fed-Ex or UPS Ground).
*** x,y indicate mounting holes. See page 2
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
For:
Hydraulics
Air/Water
Spray
Painting
Standard
Gear Driven
Crank Rewind
Shown
Optional External
Mounting Brackets part
no. 9906.0025.
Add 2-1/2" to the X
dimensions shown in
the chart.
Two swivel joint inlets and two outlet risers to handle two
equal lengths of hose.
Gear-drive crank rewind.
Pinion brake as standard.
Standard inlets 90 ball bearing swivel joints 1/2" female
NPT threads.
Standard outlets 1/2" female NPT threads.
Pressures to 3000 psi (207 bar).
Temperatures from +20 F to +400 F (-7 C to +204 C).
Consult factory for other pressures & temps.
For power rewind see Series 2000, pg. 16.
Reels for use with oxygen/acetylene.
(See Welding Catalog H-0408-W).
G2016-17-18-8
G2020-17-18-8
G2026-17-18-8
1/4"
6
5/8"
16
2/75
2/23
2/125
2/38
2/200
2/61
3/8"
10
3/4"
19
2/50
2/15
2/100
2/31
2/150
2/46
Approx. Weight
Crank Rewind
lb.
kg.
1/2"
13
7/8"
22
2/35
2/11
2/50
2/15
2/100
2/31
Reel Dimensions***
inches
mm.
NET
SHIP
40
15
42
18
44
19
50*
23
50*
23
50*
23
13
330
17
432
23
584
8
203
12
305
18
457
21
533
25
635
31
787
11.5
292
15.5
394
21.5
546
Notes:
1. Specifications subject to change.
2. Upon request, reels can be supplied with drum lengths other than shown.
3. Finish: refer to Page 4.
4. Be sure to check dimensions and weights prior to ordering.
NOTICE: A Flexible Connector must be used between the inlet pipe and the
inlet swivel joint.
* When shipped as a parcel package (via Fed-Ex or UPS Ground).
*** x,y indicate mounting holes. See page 2
C
8
203
G
18.2
460
H
9.88
251
X
A
F
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com
E
18.5
470
reels@hannay.com
Y
10
254
D
14.5
368
17
Standard with
Crank Handle
For:
Fuel Dispensing
Spray Operations
Fire Protection
(Consult Factory)
I.D. (in)
I.D. (mm)
O.D. (in)
O.D. (mm)
3016-25-26
3020-25-26
3024-25-26
3028-25-26
Round Hose
3/4"
1"
19
25
1-9/32"
1-9/16"
33
40
100
50
30
15
150
100
46
30
250
150
76
46
300
200
91
61
Approx. Weight
Crank Rewind
lb.
kg.
Collapsible Hose
1"
25
1/2"x1-3/4"
13 x 44
200
61
300
91
400
122
550
168
NET
SHIP
85
39
94
43
103
47
113
51
120
54
129
59
138
63
155
70
13
330
17
432
21
533
25.5
648
7.5
191
11.5
292
15.5
394
20
508
23.75
603
27.75
705
31.75
806
36.25
921
7.75
197
9
229
13
330
17.5
445
Notes:
1. Specifications subject to change.
2. Upon request, reels can be supplied with drum lengths other
than shown and with disc sizes in other diameters.
3. Power rewind NOT available on these models.
4. Dimension F is the overall length of standard model reels.
Crank rewind models, 31/2" clearance required to remove crank.
5. Subtract 5" from F dimension for disc rewind models.
6. Finish: Call factory for offshore/marine finish, available at extra cost.
Refer to Page 4.
7. Be sure to check dimensions and weights prior to ordering.
NOTICE: A Flexible Connector must be used between the inlet pipe and the
inlet swivel joint.
*** x,y indicate mounting holes. See page 2
18
Reel Dimensions***
inches
mm.
E
24.75
629
G
27.88
708
C
10.5
267
H
15.5
394
Y
21.75
356
D
25.5
648
X
A
F
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
Standard with
Crank Handle
For:
Fuel Dispensing
Bulk Transfer
Fire Protection
(Consult Factory)
I.D. (in)
I.D. (mm)
O.D. (in)
O.D. (mm)
3516-25-26
3520-25-26
3524-25-26
3528-25-26
3524-30-31
3528-30-31
3534-30-31
3530-33-34
Round Hose
1"
1-1/2"
25
38
1-9/16" 2-1/16"
40
52
50
15
100
50
30
15
150
46
200
61
200
61
250
76
350
107
400
122
75
23
100
30
100
30
150
46
200
61
250
76
Approx. Weight
Crank Rewind
lb.
kg.
Collapsible Hose
1-1/2"
1-3/4"
38
44
3/4"x3" 7/8"x3-1/4"
19 x 76
22 x 83
50
50
15
15
100
75
30
23
150
46
200
61
250
76
300
91
450
137
450
137
100
30
150
46
150
46
250
76
350
107
350
107
Reel Dimensions***
inches
mm.
NET
SHIP
95
43
104
47
130
59
139
63
13
330
17
432
7.5
191
11.5
292
24.75
629
24.75
629
26
660
30
762
27.88
708
27.88
708
15.5
394
15.5
394
7.75
197
9
229
113
51
123
56
124
56
134
61
147
67
138
63
157
71
173
78
174
79
184
83
197
89
188
85
21
533
25.5
648
21
533
25.5
648
31.5
800
27.5
699
15.5
394
20
508
15.5
394
20
508
26
660
22
559
24.75
629
24.75
629
28.75
730
28.75
730
28.75
730
31.75
806
34
864
38.5
978
34
864
38.5
978
44.5
1130
40.5
1029
27.88
708
27.88
708
29.88
759
29.88
759
29.88
759
32.38
822
15.5
394
15.5
394
15.5
394
15.5
394
15.5
394
16.5
419
13
330
17.5
445
13
330
17.5
445
23.5
597
19.5
495
Notes:
1. Specifications subject to change.
2. Upon request, reels can be supplied with drum lengths other than
shown and with disc sizes in other diameters.
3. Power rewind NOT available on these models.
4. Dimension F is the overall length of standard model reels.
Crank rewind models, 31/2" clearance required to remove crank.
5. Subtract 5" from F dimension for disc rewind models.
6. Finish: Call factory for offshore/marine finish, available at extra cost.
Refer to Page 4.
7. Be sure to check dimensions and weights prior to ordering.
NOTICE: A Flexible Connector must be used between the inlet pipe and the
inlet swivel joint.
*** x,y indicate mounting holes. See page 2
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com
C
10.5
267
Y
21.75
356
D
25.5
648
reels@hannay.com
X
A
F
19
MANUAL OR POWER
REWIND REELS
To handle single 3/4" or 1" I.D. hose.
For:
Fuel Dispensing
Water Supply
Chemical Transfer
(Consult Factory)
Fire Protection
Optional External
Mounting Brackets part
no. 9906.0025.
Add 2-1/2" to the X
dimensions shown in
the chart.
3/4"
19
1-9/32"
33
50
15
100
30
150
46
200
61
Approx. Weight
Crank Rewind 3
lb.
kg.
1"
25
1-9/16"
40
35
11
50
15
75
23
100
30
NET
SHIP
36
16
46
21
57
26
70
32
50*
23
56*
25
62*
28
112
51
15
381
21
533
27
686
35
889
10
254
16
406
22
559
30
762
Notes:
E
CRANK
16.5
419
16.5
419
16.5
419
16.5
419
E
POWER
19
483
19
483
19
483
19
483
F
CRANK
27
686
33
838
39
991
47
1194
F
POWER
20.5
521
26.5
673
32.5
826
40.5
1029
X
13.5
343
19.5
495
25.5
648
33.5
851
20
Reel Dimensions***
inches
mm.
C
8
203
G
18.12
460
H
9.88
251
Y
10
254
D
14.5
368
X
A
F
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
MANUAL OR POWER
REWIND REELS
To handle single 3/4" or 1" I.D. hose.
Electric Rewind Shown
with Gear Driven
Crank Rewind
For:
Fuel Dispensing
Fire Protection
Water Supply
Chemical Transfer
(Consult Factory)
3/4"
19
1-9/32"
33
50
15
100
30
150
46
200
61
1"
25
1-9/16"
40
35
11
50
15
75
23
100
30
Approx. Weight
Crank Rewind 3
lb.
kg.
Reel Dimensions***
inches
mm.
NET
SHIP
62
28
72
33
83
38
96
44
97
44
107
49
118
54
131
59
15
381
21
533
27
686
35
889
10
254
16
406
22
559
30
762
Notes:
1. Specifications subject to change.
2. Upon request, reels can be supplied with drum lengths other than shown.
3. Weights shown in chart are for crank rewind models. ADD these amounts for
power rewind models:
Net (lbs.)
Ship (lbs.)
Net (kg.)
Ship (kg.)
Electric
18
18
8.2
8.2
Hydraulic
15
15
6.8
6.8
Air
15
15
6.8
6.8
4. Dimension F" is the overall length of standard model reels.
5. When ordering power rewind models, prefix model number with:
A = Air Rewind
E = Electric Rewind
HD = Hydraulic Rewind
(Air rewind reels are supplied with control valve and hose; 12v and 24v DC
rewind reels are supplied with switch and solenoid; 115v AC rewind reels are
not supplied with switch but can be ordered separately; hydraulic rewind reels
are not supplied with control valve.)
6. Finish: refer to Page 4.
7. Be sure to check dimensions and weights prior to ordering.
NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet
swivel joint.
*** x,y indicate mounting holes. See page 2
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com
E
CRANK
18
457
18
457
18
457
18
457
E
POWER
20.5
521
20.5
521
20.5
521
20.5
521
21.5
546
27.5
699
33.5
851
41.5
1054
7.5
190
13.5
343
19.5
495
27.5
698
B
C
8
203
G
18.12
460
H
9.88
251
Y
12.5
318
D
15.5
394
X
A
F
reels@hannay.com
21
MANUAL OR POWER
REWIND REELS
Electric Rewind
Standard
Configuration
Shown
For:
Fuel Dispensing
(Consult Factory)
Spray Operations
Fire Protection
Water Blasting*
Sewer Cleaning*
22
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
Approx. Weight
Crank Rewind 3
lb.
kg.
Reel Dimensions***
inches
mm.
1/2"
13
7/8"
22
235
72
350
107
450
137
3/4"
19
1-9/32"
33
125
38
200
61
185
56
1"
25
1-9/16"
40
60
18
100
30
100
30
NET
SHIP
85
39
102
46
92
42
127
58
144
65
134
61
21
533
29.5
749
21
533
15.5
394
24
610
15.5
394
20.5
521
20.5
521
20.5
521
285
87
500
152
450
137
250
76
350
107
100
30
200
61
300
91
235
72
400
122
500
152
550
168
600
183
150
46
200
61
60
18
100
30
200
61
135
41
200
61
265
81
300
91
350
107
105
48
120
54
88
40
100
45
113
51
101
46
113
51
121
55
125
57
129
59
147
67
162
73
130
59
142
64
155
70
151
68
163
74
171
78
175
79
179
81
27.5
699
35
889
13
330
19
483
25.5
648
15
381
21
533
25.5
648
27.5
699
25
635
22
559
29.5
749
7.5
191
13.5
343
20
508
9.5
241
15.5
394
20
508
22
559
20
508
20.5
521
20.5
521
25.5
648
25.5
648
25.5
648
25.5
648
25.5
648
25.5
648
25.5
648
31.5
800
18.75
476
18.75
476
22.75
578
F
F
CRANK POWER
25.38
28.5
645
724
33.88
37
861
940
25.38
28.5
645
724
21.5
546
21.5
546
23.5
597
12.12
308
12.12
308
12.12
308
13
330
21.5
546
13
330
16.75
425
16.75
425
16.75
425
22.75
578
22.75
578
24.75
629
24.75
629
24.75
629
28.75
730
28.75
730
28.75
730
28.75
730
31.75
806
31.88
810
39.38
1000
17.38
441
23.38
594
29.88
759
19.38
492
25.38
645
29.88
759
31.88
810
29.62
752
23.5
597
23.5
597
27.88
708
27.88
708
27.88
708
29.88
759
29.88
759
29.88
759
29.88
759
33.62
854
12.12
308
12.12
308
15.5
394
15.5
394
15.5
394
15.5
394
15.5
394
15.5
394
15.5
394
17.75
451
19.5
495
27.5
699
7.75
197
11
279
17.5
445
7
178
13
330
17.5
445
19.5
495
17.5
445
16.75
425
16.75
425
21.75
552
21.75
552
21.75
552
21.75
552
21.75
552
21.75
552
21.75
552
27.75
705
35
889
42.5
1080
20.5
521
26.5
673
33
838
22.5
572
28.5
724
33
838
35
889
32.75
832
Notes:
Specifications subject to change.
1. Upon request, reels can be supplied with drum lengths other than shown and
with disc sizes in other diameters.
2. Dimensions shown for reels up to and including 30-31 disc size reflect
pressed frames. All others are rollformed channel frames.
3. Weights shown in chart are for crank rewind models. ADD these amounts for
power rewind models:
Net (lbs.) Ship (lbs.)
Net (kg.)
Ship (kg.)
Electric 1/2 HP
40
40
18.1
18.1
Hydraulic
20
20
9.1
9.1
Air
20
20
9.1
9.1
4. When ordering power rewind models, prefix model number with:
A = Air Rewind EP = Electric Rewind (1/2 hp)
HD = Hydraulic Rewind
(Air rewind reels are supplied with control valve and hose; 12v and 24v DC
rewind reels are supplied with switch and solenoid; 115v AC rewind reels
are not supplied with switch but can be ordered separately; hydraulic rewind
reels are not supplied with control valve.)
5. Finish: refer to Page 4.
6. Be sure to check dimensions and weights prior to ordering.
NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet
swivel joint.
*** x,y indicate mounting holes. See page 2
Some applications require a clutch/reduction unit.
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com
C
10.5
267
G
H
X
A
F
Y
D
Power Rewind Shown
reels@hannay.com
23
MANUAL OR POWER
REWIND REELS
To handle dual 3/4" or 1" I.D. hose.
Two swivel joint inlets and two outlet risers to handle two equal
lengths of hose.
Choose gear-driven crank rewind or chain & sprocket drive
powered by an electric, hydraulic or compressed air motor.
An auxiliary rewind is standard.
Crank rewind and power rewind reels, pinion brake standard.
Standard inlets 90 ball bearing swivel joints 1" female NPT threads.
Standard outlets 1" female NPT threads.
For:
Standard inlet, outlet riser and hub assembly are steel. Optional bronze or
aluminum swivel joint and stainless steel hub assembly and riser, are available.
Hydraulics
Pressures to 1000 psi (69 bar).
Dual Agents
Temperatures from -60 F to +250 F (-51 C to +121 C).
Parts Drawing ISO 72
Consult factory for other pressures & temps.
Model
Number
For Power
Rewind
See Note 5
7024-19-21
7026-23-24
7016-25-26
7032-25-26
7032-30-31
7024-33-34
7032-33-34
Approx. Weight
Crank Rewind 4
lb.
kg.
Reel Dimensions***
inches
mm.
3/4"
19
1-9/32"
33
2/60
2/18
2/90
2/27
1"
25
1-9/16"
40
2/25
2/8
2/50
2/15
NET
SHIP
100
45
105
48
142
64
147
67
21
533
23
584
15.5
394
17.5
445
20.5
521
20.5
521
2/40
2/12
2/175
2/53
2/300
2/91
2/225
2/69
2/30
2/9
2/100
2/31
2/150
2/46
2/115
2/35
95
43
129
59
137
62
120
54
145
66
179
81
187
85
170
77
13
330
29.5
749
29.5
749
20.5
521
7.5
191
24
610
24
610
15.5
394
2/350
2/107
2/200
2/61
137
62
187
85
29
737
24
610
Notes:
1. Specifications subject to change.
2. Upon request, reels can be supplied with drum lengths other than shown
and with disc sizes in other diameters.
3. Dimensions shown up to and including 30-31 disc size reflect pressed
frames. All others are rollformed channel frames.
4. Weights shown in chart are for crank rewind models. ADD these amounts
for power rewind models:
Net (lbs.) Ship (lbs.)
Net (kg.)
Ship (kg.)
Electric
40
40
18.1
18.1
Hydraulic
20
20
9.1
9.1
Air
20
20
9.1
9.1
5. When ordering, prefix model number with:
A = Air Rewind
EP = Electric Rewind
MX = Chain Drive Crank
HD = Hydraulic Rewind
(Air rewind reels are supplied with control valve and hose; 12v and 24v
DC rewind reels are supplied with switch and solenoid; 115v AC rewind
reels are not supplied with switch but can be ordered separately; hydraulic
rewind reels are not supplied with control valve.)
6. Finish: refer to Page 4.
7. Be sure to check dimensions and weights prior to ordering.
24
Standard
Configuration
Shown
21.88
556
23
584
F
F
CRANK POWER
29.75 32.12
756
816
31.75 34.12
806
867
21.5
546
23.5
597
12.12
308
12.12
308
13
330
15
381
16.75
425
16.75
425
25.5
648
25.5
648
25.5
648
31.5
800
24.75
629
24.75
629
28.75
730
31.75
806
21.75
552
38.25
972
38.25
972
29.75
756
24.12
613
40.62
1032
40.62
1032
32.12
816
27.88
708
27.88
708
29.88
759
33.62
854
15.5
394
15.5
394
15.5
394
17.75
451
7.75
197
21.5
546
21.5
546
13
330
21.75
552
21.75
552
21.75
552
27.75
705
31.5
800
31.75
806
38.25
972
40.62
1032
33.62
854
17.75
451
21.5
546
27.75
705
C
10.5
267
G
H
X
A
Y
D
NOTICE: A Flexible Connector must be used between the inlet pipe and the
inlet swivel joint.
*** x,y indicate mounting holes. See page 2
Some applications require a clutch/reduction unit.
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
MANUAL OR POWER
REWIND REELS
For:
Fuel Dispensing
(Consult Factory)
Bulk Transfer
Suction/Discharge
(Consult Factory)
Approx. Weight
Crank Rewind 4
lb.
kg.
1"
25
1-9/16"
40
1-1/4"
32
1-13/16"
46
1-1/2"
38
2-1/16"
52
85
26
200
61
115
35
200
61
190
58
285
87
70
21
190
58
75
23
135
41
160
49
260
79
335
102
200
61
Reel Dimensions***
inches
mm.
NET
SHIP
50
15
100
30
50
15
100
30
100
30
160
49
104
47
130
59
106
48
123
56
118
54
131
59
146
66
172
78
148
67
165
75
168
76
181
82
25.5
648
35
889
17
432
25.5
648
19
483
25.5
648
20
508
29.5
749
11.5
292
20
508
13.5
343
20
508
20.5
521
20.5
521
25.5
648
25.5
648
25.5
648
25.5
648
18.75
476
22.75
578
24.75
629
24.75
629
28.75
730
28.75
730
32
813
41.5
1054
23.5
597
32
813
25.5
648
32
813
200
61
133
60
183
83
22.5
572
17.5
445
31.5
800
31.75
806
29.25
743
Notes:
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com
F
F
CRANK POWER
33
838
42.5
1080
24.5
622
33
838
26.5
673
33
838
21.5
546
23.5
597
27.88
708
27.88
708
29.88
759
29.88
759
12.12
308
12.12
308
15.5
394
15.5
394
15.5
394
15.5
394
17.5
445
27
686
9
229
17.5
445
11
279
17.5
445
16.75
425
16.75
425
21.75
552
21.75
552
21.75
552
21.75
552
30.25
768
33.62
854
17.75
451
15
381
27.75
705
C
10.5
267
G
H
Y
D
A
F
reels@hannay.com
25
MANUAL OR POWER
REWIND REELS
To handle single 1-1/2" or 2" I.D. hose.
For:
Bulk Transfer
Chemical Transfer
General Dispensing
Suction/Discharge
(consult factory)
Fueling Applications
Refer to:
Aviation Catalog
H-0418-AVIA
Petroleum Catalog
H-0417-FD
26
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
For Power
Rewind
See Note 4
8234-26-27
8238-26-27
8246-26-27
8226-33-34
8234-33-34
8238-39-40
Approx. Weight
Crank Rewind 3
lb.
kg.
Reel Dimensions***
inches
mm.
1-1/2"
38
2-1/16"
52
80
24
100
30
145
44
2"
51
2-9/16"
65
60
18
75
23
100
30
NET
SHIP
120
54
145
66
196
89
170
77
195
88
245
112
26.25
667
30.25
768
38.25
972
20
508
24
610
32
813
27
686
27
686
27
686
85
26
150
46
340
104
60
18
115
35
225
69
80
36
133
60
218
99
150
68
230
105
420
191
17.75
451
26.25
667
30.25
768
11.5
292
20
508
24
610
31.5
800
31.5
800
40
1016
25.75
654
25.75
654
25.75
654
F
F
CRANK POWER
33.75 34.75
857
883
37.75 38.75
959
984
45.75 46.75
1162
1188
26.62
676
26.62
676
26.62
676
13.75
349
13.75
349
13.75
349
18.75
476
22.75
578
30.75
781
23.25
591
23.25
591
23.25
591
31.75
806
31.75
806
39
991
25.25
641
33.75
857
37.75
959
33.38
848
33.38
848
39.88
1013
17.75
445
17.75
445
20.38
518
10.25
260
18.75
476
22.75
578
27.75
705
27.75
705
37
940
26.25
667
34.75
883
38.75
984
Notes:
1. Specifications subject to change.
2. Upon request, reels can be supplied with drum lengths other than
shown and with disc sizes in other diameters.
3. Weights shown in chart are for crank rewind models. ADD these
amounts for power rewind models:
Net (lbs.) Ship (lbs.)
Net (kg.)
Ship (kg.)
Electric
40
40
18.1
18.1
Hydraulic
20
20
9.1
9.1
Air
20
20
9.1
9.1
4. When ordering power rewind models, prefix model number with:
A = Air Rewind
EP = Electric Rewind (1/2 HP)
HD = Hydraulic Rewind
(Air rewind reels are supplied with control valve and hose; 12v
and 24v DC rewind reels are supplied with switch and solenoid;
115v AC rewind reels are not supplied with switch but can be
ordered separately; hydraulic rewind reels are not supplied with
control valve.)
5. Finish: refer to Page 4.
6. Be sure to check dimensions and weights prior to
ordering.
NOTICE: A Flexible Connector must be used between the inlet pipe
and the inlet swivel joint.
*** x,y indicate mounting holes. See page 2
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com
C
15.5
393
G
H
X
A
F
reels@hannay.com
Y
D
27
MANUAL OR POWER
REWIND REELS
To handle 2" through 3" I.D. hose.
For:
Suction/Discharge
(consult factory)
High Volume
Application
Bulk Transfer
Chemical Transfer
Fueling Applications
Refer to:
Aviation Catalog
H-0418-AVIA
Petroleum Catalog
H-0417-FD
28
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
Approx. Weight
Crank Rewind 3
lb.
kg.
Reel Dimensions**
inches
mm.
2"
51
2-9/16"
65
70
21
100
30
2-1/2"
64
3-3/16"
81
30
9
45
14
3"
76
3-3/4"
95
25
8
35
11
NET
SHIP
147
67
187
85
217
98
257
117
23.75
603
30.25
768
17.5
445
24
610
31.75
807
31.75
807
140
43
185
56
200
61
60
18
90
27
130
40
50
15
80
24
115
35
237
108
239
108
361
164
372
169
480
218
525
239
38.25
972
30.25
768
26.25
667
32
813
24
610
20
508
31.75
807
40
1016
46
1168
Notes:
1. Specifications subject to change.
2. Upon request, reels can be supplied with drum lengths other than
shown and with disc sizes in other diameters.
3. Weights shown in chart are for crank rewind models. ADD these
amounts for power rewind models:
Net (lbs.) Ship (lbs.)
Net (kg.)
Ship (kg.)
Electric
40
40
18.1
18.1
Hydraulic
20
20
9.1
9.1
Air
20
20
9.1
9.1
4. When ordering power rewind models, prefix model number with:
A = Air Rewind
EP = Electric Rewind (1/2 HP)
HD = Hydraulic Rewind
(Air rewind reels are supplied with control valve and hose; 12v
and 24v DC rewind reels are supplied with switch and solenoid;
115v AC rewind reels are not supplied with switch but can be
ordered separately; hydraulic rewind reels are not supplied with
control valve.)
5. Finish: refer to Page 4.
6. Be sure to check dimensions and weights prior to
ordering.
NOTICE: A Flexible Connector must be used between the inlet pipe and
the inlet swivel joint.
*** x,y indicate mounting holes. See page 2
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com
31.75
807
31.75
807
F
F
CRANK POWER
33.75 33.25
857
845
40.25 39.75
1022
1010
33.88
861
33.88
861
18
457
18
457
16.25
413
22.75
578
27.75
705
27.75
705
31.75
807
39
991
45
1143
48.25
1226
40.25
1022
36.25
921
33.88
861
40.38
1026
46.38
1178
18
457
20.88
530
23.88
607
30.75
781
22.75
578
18.75
476
27.75
705
37
940
43
1092
47.75
1213
39.75
1010
35.75
908
C
20
508
H
Y
D
X
A
F
reels@hannay.com
29
Continuous flow reels with swivel joint inlet, fluid hub, outlet riser.
Comes with cam-lock brake.
Direct crank rewind.
One-piece foot, rubber tires, and removable steel handlebar.
Permanently attached crank.
Standard inlet 90 ball bearing swivel joint 1/2" female NPT
threads.
Standard outlet is 1/2" female NPT threads.
GH Prefix to model # (e.g. GH1100) includes garden hose
thread on outlet, 5' lead-in hose, hose end clips.
Pressures to 3000 psi (207 bar).
Temperatures from +20 F to +400 F (-7 C to +204 C).
GH 1100
Configuration
Shown
For:
Grounds
Maintenance
Restaurants/Hotels
Home Use
1100
3/8"
10
3/4"
19
275
84
1/2"
13
7/8"
22
175
53
Approx. Weight
lb.
kg.
5/8"
16
1"
25
125
38
NET
SHIP
47
21
50*
23
Notes:
Reel Dimensions
inches
mm.
D
F
30
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
Continuous flow reels with swivel joint inlet, fluid hub, outlet riser.
Comes with pneumatic tires and cam-lock drag brake.
Direct crank rewind.
One-piece foot, and removable steel handlebar.
Permanently attached crank.
Model AT1200 standard inlet 90 balance pressure swivel
joint 1" female NPT threads.
Standard outlet is 1" female NPT threads.
GH Prefix to model # (e.g. GHAT1200) includes garden hose
thread on outlet, 5' lead-in hose, hose end clips.
Operates at pressures to 1000 psi.
Temperatures from -40 F to +250 F (-40 C to +121 C).
Consult factory for other pressures & temps.
GHAT 1200
Configuration
Shown
For:
Grounds
Maintenance
Restaurants/Hotels
Home Use
AT1200
1/2"
13
7/8"
22
350
107
5/8"
16
1"
25
250
76
3/4"
19
1-9/32"
33
150
46
Approx. Weight
lb.
kg.
1"
25
1-9/16"
40
100
30
NET
SHIP
86
39
91*
41
Reel Dimensions
inches
mm.
Notes:
1. Specifications subject to change.
2. Finish: refer to Page 4.
3. Be sure to check dimensions and weights prior to
ordering.
*When shipped as a parcel package (via Fed-Ex or UPS Ground)
G
C
D
F
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com
reels@hannay.com
31
Standard
Configuration
Shown
For:
Industrial
Maintenance
Construction
Agriculture
Grounds
Maintenance
O.D. (in)
O.D. (mm)
C1150
16/3
.390
10
1100
335
Approx. Weight
lb.
kg.
Gauge/Number of Conductors
14/3
12/3
10/3
.530
.600
.690
14
15
18
500
400
300
152
122
91
NET
SHIP
44
20
50*
23
Notes:
1. Specifications subject to change.
2. When ordering specify model number, O.D., length and weight of
cable, hose, etc.
3. Finish: refer to Page 4.
4. Be sure to check dimensions and weights prior to
ordering.
*When shipped as a parcel package (via Fed-Ex or UPS Ground),
some assembly required.
Reel Dimensions
inches
mm.
B
12
305
C
6
152
G
39
991
H
13.81
351
A
21.5
546
F
24.25
616
32
E
16.5
419
D
22
559
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
Standard
Configuration
Shown
For:
Industrial
Maintenance
Construction
Agriculture
Grounds
Maintenance
O.D. (in)
O.D. (mm)
ATC1250
16/3
.390
10
1800
549
Approx. Weight
lb.
kg.
Gauge/Number of Conductors
14/3
12/3
10/3
.530
.600
.690
14
15
18
950
290
750
229
550
168
NET
SHIP
84
38
89*
40
Notes:
1. Specifications subject to change.
2. When ordering specify model number, O.D., length and weight of
cable, hose, etc.
3. Finish: refer to Page 4.
4. Be sure to check dimensions and weights prior to ordering.
* When shipped as a parcel package (via Fed-Ex or UPS Ground),
some assembly required.
Reel Dimensions
inches
mm.
C
8
203
G
40
1016
H
17.25
438
A
24.88
632
F
26.5
673
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com
E
22.75
578
B
11.5
292
reels@hannay.com
D
23
584
33
MANUAL OR POWER
REWIND STORAGE REELS
To handle single 1/4" through 1" O.D.
Standard
Configuration
Shown
Rope
Wire
Approx. Weight
Crank Rewind 4
lb.
kg.
1/4"
6
1/2"
13
3/4"
19
1"
25
NET
SHIP
E
CRANK
E
POWER
F
CRANK
F
POWER
1300
396
325
99
650
198
900
274
150
46
300
91
450
137
75
23
150
46
225
69
23
10
25
11
27
12
34*
15
50*
23
50*
23
11
279
17
432
23
584
6
152
12
305
18
457
16.5
419
16.5
419
16.5
419
19
483
19
483
19
483
16
406
22
559
28
711
15.75
400
21.75
552
27.75
705
9.5
241
15.5
394
21.5
546
1000
305
550
168
275
84
29
13
50*
23
27
686
22
559
16.5
419
19
483
32
813
31.75
806
25.5
648
Notes:
1. Specifications subject to change.
2. Upon request, reels can be supplied with drum lengths other than shown
and with disc sizes in other dimensions.
3. Dimensions reflect pressed frames.
4. Weights shown in chart are for crank rewind models.
ADD these amounts for power rewind models.
Net (lbs.) Ship (lbs.)
Net (kg.)
Ship (kg.)
Electric
18
18
8.2
8.2
Hydraulic
15
15
6.8
6.8
Air
15
15
6.8
6.8
5. When ordering power rewind models
Prefix model number with:
A = Air Rewind
E = Electric Rewind
HD = Hydraulic Rewind
(Air rewind reels are supplied with control valve and hose;
12v and 24v DC rewind reels are supplied with switch and solenoid;
115v AC rewind reels are not supplied with switch but can be ordered
separately; hydraulic rewind reels are not supplied with control valve.)
6. Finish: refer to Page 4.
7. Be sure to check dimensions and weights prior to ordering.
* When shipped as a parcel package (via Fed-Ex or UPS Ground).
*** x,y indicate mounting holes. See page 2
34
Reel Dimensions***
inches
mm.
B
C
6
153
G
18.12
460
H
9.88
251
X
A
F
Y
10
254
D
14.5
368
Optional External
Mounting Brackets part
no. 9906.0025.
Add 2-1/2" to the X
dimensions shown in
the chart.
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com
MANUAL REWIND
STORAGE REELS
Standard
Configuration Shown
Standard with
Crank Handle
Rope
Wire
C3218-25-26
C3228-25-26
C3234-25-26
Approx. Weight
Crank Rewind
lb.
kg.
Reel Dimensions***
inches
mm.
1/2"
13
3/4"
19
1"
25
1-1/4"
32
1-1/2"
38
NET
SHIP
E
CRANK
F
CRANK
1000
305
450
137
1000
305
1300
396
225
69
500
152
650
198
125
38
325
99
400
122
90
27
200
61
275
84
85
39
109
49
122
55
127
58
151
68
164
74
15
381
25.5
648
31.5
800
9.5
241
20
508
26
660
24.75
629
24.75
629
24.75
629
22
559
32.5
826
38.5
978
27.88
708
27.88
708
27.88
708
15.5
394
15.5
394
15.5
394
7
178
17.5
445
23.5
597
Notes:
1. Specifications subject to change.
2. Upon request, reels can be supplied with drum lengths other than shown and
with disc sizes in other dimensions.
3. Dimensions reflect pressed frames.
4. Series C3200 requires 3-1/2" clearance to remove crank handle.
5. Subtract 5" from F dimension for disc rewind on C3200 Series.
6. Finish: refer to Page 4.
7. Be sure to check dimensions and weights prior to ordering.
*** x,y indicate mounting holes. See page 2
C
10.5
267
G
H
X
A
F
Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357)
FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com
reels@hannay.com
Y
21.75
356
D
25.5
648
35
Cable Reels
Firefighting Reels
Welding Reels
Reference Guide
Audio/Video Reels
Ordering &
Accessory Guide
Family owned and operated since 1933, Hannay Reels is a leader in both OEM and aftermarket applications.
Hannay offers thousands of standard hose reel and cable reel models, as well as unmatched
custom capabilities. We can easily and affordably customize a reel to meet your exact specifications
built to last, delivered fast. Additional catalogs are available through your local Hannay Reels dealer
or online at www.hannay.com.
www.hannay.com
DP 15M 5-06
MADE IN U.S.A.
Form H-0308-H
Rev 2