bridge configuration.
and heavy sidewalls are made from one piece of stainless steel.
FEATURES
High frequency
mV/V output
Subminiature footprint
1 % accuracy
CE approved
Model G
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Pressure ranges
CJ
150 psig
CL
200 psig
CN
250 psig
Accuracy1
CP
300 psig
Linearity
CQ
400 psig
Hysteresis
CR
500 psig
Non-repeatability
CS
600 psig
Output
2 mV/V
CT
750 psig
Resolution
Infinite
CV
1000 psig
DJ
1500 psig
DL
2000 psig
DM
2500 psig
DN
3000 psig
DR
5000 psig
DS
6000 psig
DT
7500 psig
DV
10000 psig
EJ
15000 psig
EL
20000 psig
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Temperature, operating
Temperature, compensated
16 C to 71 C [60 F to 160 F]
0.02 % reading/F
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Bonded foil
Excitation (calibration)
5 Vdc
Bridge resistance
350 ohm
Included
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Media
Overload, safe
50 % over capacity
Case material
Stainless steel
OPTION CODES
Range Code
Pressure ranges
Temperature
compensation
1a. 60 F to 160 F
1b. 30 F to 130 F
1c. 0 F to 185 F
1d. -20 F to 130 F
1e. -20 F to 200 F
Internal
amplifiers
Electrical
termination
WIRING CODES
Wire
Cable/unamplified
Red
(+) excitation
Black
(-) excitation
Green
(-) output
White
(+) output
1f. 70 F to 250 F
1g. 70 F to 325 F
1h. 70 F to 400 F
1i. -65 F to 250 F
Range
(psig)
Diaphragm
BP386
150
psig to
15000
psig
7,87
mm
[0.310
in]
3,81
mm
[0.15
in]
11,94
mm
[0.47
in]
11,18
mm
[0.44
in]
3,81
mm
[0.15
in]
Welded
BP387
150
psig to
20000
psig
9,53
mm
[0.375
in]
3,81
mm
[0.15
in]
11,94
mm
[0.47
in]
12,7
mm
[0.50
in]
3,81
mm
[0.15
in]
Welded
Model G
NOTES
1. Accuracies stated are expected forbest-fit straight line for all errors, including linearity, hysteresis & non-repeatability thru zero.
2. Only available on certain models, consult factory.
WARNING
PERSONAL INJURY
DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.