measurIT technologies
Portable
Liquid / Gas
Usage of portable clamp-on ultrasonic flowmeters allows a qualitative control of permanently installed
flowmeters. Fast mounting and demounting without interruption of process, perfect accuracy even if quality
of pipes and water is not good.
Clamp-on flow
? measurement
Ultrasound River water
Solution….……………………………………………...
A portable clamp-on ultrasonic flowmeter is the ideal solution for this
measuring task. It can be installed without process interruption and
without any additional insert in pipe. Mounting the transducers takes
30 minutes if the measuring point is not prepared, and only 5-10 min
when it is. Moving away from electromagnetic interferences and
pump results in additional accuracy of measurement. Only two pairs
of transducers are needed to cover practically the whole range of
pipe diameters. The possibility of storing the measuring results
allows the comparison with the permanent meters and makes it
Fit for the real world: plug&play measurement possible to judge of the functionality of the latter. The condition of
with FLUXUS® ADM, even the conditions are
rough at the measuring point! the pipe's inner surface at a measuring point can be evaluated by
controlling such parameters as the amplitude, quality and transit
time of the signal from time to time.
Advantages...…………………………………………..