Solutions
Equipment control
Air Conditioners
Older telecom
equipment
Access
Manufacturing
Generators
Equipment Control
Check status and control operation of air conditioners.
Control industrial or custom process, like switching
cooling fan on when internal street cabinet
temperature gets too high.
Control older UPS and DC systems through their dry
contact connection controls.
Check and operate generators using its control panel.
Access (barrier, gate, door) control via SMS or calls,
with access database.
Remote control of all equipment by Internet or SMS.
Automatic response actions for situation changes.
Notifications on e-mail and/or SMS about all
events.
Electricity measurement
KWH meters
Frequency
Voltage
Current
Electricity measurement
Various electrical measurements are supported.
High voltages require external transformer-less transducers
that lower high voltages to <5v level.
High AC voltages can be lowered to <5v level by external
transformer as well.
Direct isolated inputs for <60vDC and <40vAC are also
available.
Measurement
Adaptor type
AC voltage (V)
040
0450
Transducer
DC voltage (V)
060
0450
Transducer
AC current (A)
0100
Current transformer
DC current
60mV measurement
DC Shunt
DC current (A)
0100
Hall sensor
4565
Transducer
Frequency (Hz)
Temperature
Gas
Water detectors
Motion detectors
Door/window detectors
IT Control
IT Control
Switches /
Routers
Servers
Network printers
Workstations
IT Control
Servers, workstations, routers, switches, network
printers, hardware firewalls and spam filters, and any
other device with Ethernet connection can all be
controlled by the IT Control feature.
Devices supporting SNMP (Simple Network
Management Protocol) provide various status
information: CPU load, hard drive space, physical and
virtual memory, installed software, and list of running
processes.
Detailed information can be viewed remotely.
Windows servers shutdown is integrated through free
client software.
Manual and automatic LAN wakeup function is
implemented.
Practical Applications
Unmanned Site
Thousand of cellular sites consume power, need security
system and environmental controls. Only for knowing
electricity consumption, personnel is being sent to every
site once a month. How to minimize overall cost?
1.
2.
3.
4.
5.
12vDC operating voltage can be taken either from Power+ System Controller
auxiliary voltage connector for battery backup, or from a provided 12v AC/DC
adaptor. SIM card is required for operation, quad-band GSM modem provides
worldwide cell network coverage.
Supported products:
DC Power Systems: PS1006, PS2012, 1UDC+
UPS Systems: PS-SP, MST, Power+, Power+ SA
Amount
Remark
Dry inputs
Dry outputs
Temperature
RS-232
Ethernet
G-Eye is the fully featured Site Manager. Monitoring and control options
are extended compared with the G4. It also shows great emergency
performance with its internal backup battery and front panel LCD.
Complete site monitoring includes more features, like KWH meters and
power measurements.
Additional environmental control features include more options.
19 design to suit standard mounting equipment.
Amount Remark
Dry inputs
32 NO/NC programmable
Dry outputs
16 Changeover
Temperature
RS-232
Ethernet
1 Communication + IT Control
AC or DC volts / AC or DC amps
Frequency
kWH metering
Humidity
Liquid level
Safety
kWH
Air conditioners
Telecom equipment
UPS
Diesel generators
DC Power
Fuel level
Measurements
Gamatronic
Element
Management
System
innovated