EDITORIAL
Having skilled teams that fully understand their products to maintain optimum production
conditions is a priority for engineering or maintenance departments.
For the last thirty years, the Leroy-Somer Training Center has been helping its clients develop their teams
skills.
Every year we train over 2000 people in our Training Center in Angoulme.
The sessions are held in well-equipped facilities where role-playing exercises in close to real-life situations
are organized in complete safety.
Our trainers all have extensive in-company experience enabling them to devise training modules that meet
your needs. Training sessions can also be held on-site.
The Leroy-Somer Training Center has signed the FIECC* Quality Commitment Charter. It guarantees the
high quality of the entire training program preparation process.
We hope this new catalogue will provide you with the training solutions you need. We look forward to
meeting you either in our Training Center or on your own premises.
* Federation of electrical, electronic and communication industries
Alain BONDOUX
Product Training Manager
Table of content
CUSTOMIZED TRAINING
Customized training courses................................................................................................................... 13
PRACTICAL INFORMATION
Practical information and registration...................................................................................................... 14
General training terms and conditions..................................................................................................... 15
Items
Theme
SELECTION
OPERATION
MAINTENANCE
3
OBJECTIVES
After the training, the trainees will be able to:
- Identify the terms of the vibration analysis and their applications
- Analyse a specifications sheet specific to noise - vibrations
- Determine a design process taking vibration constraints into consideration
- Perform a pre-analysis based on a vibration measurement report
AUDIENCE
Attendance*: 3 to 4 participants
Prerequisites: None
- Maintenance technician
CONTENT
- Definitions, measurement units, measurement points and
associated standards in vibration
- Spectral analysis, definitions, examples, settings
- Diagnostic process from spectrums in vibration and noise
- Resonance: definition, measurement and calculation
- Definitions, measurement units, measurement points and
associated standards in acoustics
- Design approach: methodology, acceptance criteria, global
process
- Case studies on application with motor / alternator
RELATED PRODUCTS
- Alternators - Electric motors
*The Course is confirmed once at least 3 inter and/or intra company participants have signed up.
OBJECTIVES
After the training, the trainees will be able to:
- Understand the operation of an alternator (mechanical constructions and configurations)
- Identify the excitation and regulation principles of the alternators
- Select an alternator
AUDIENCE
Attendance*: 4 to 8 participants
Prerequisites: None
- Sales engineer
- Genset manufacturer
CONTENT
- Reminders on electricity basics in alternators
- Excitation systems
- Regulation modes and parallel running
- Basics of electrical engineering applied to alternators
- Main mechanical aspects: construction (IM), protection (IP),
cooling (IC)
- Presentation of the LS range: design and manufacturing
RELATED PRODUCTS
- Synchronous alternators of the Leroy-Somer range
OBJECTIVES
After the training, the trainees will be able to:
- Understand the excitation and regulation principles of the alternators
- Identify the details of the electrical parameters and mechanical configurations
- Select an alternator according to a specifications sheet
AUDIENCE
Attendance*: 4 to 8 participants
Prerequisites: Knowledge in
electrical engineering (basics)
- Sales engineer
- Genset manufacturer
CONTENT
- Reminder on the basics of the different excitation systems
- Presentation of the operating modes and parallel running
- Discovery of help options: LAM, U/F, equalisation, AREP, ...
-P
resentation of electrical engineering basics about alternators
(insulation, temperature rises, harmonics, neutral point,
reactance, PQ diagram, IEEE diagram, curves, etc)
- Presentation of mechanical aspects: construction (IM),
protection (IP), cooling (IC), main bearings, terminal box
- Study of real-world cases based on trainee experiences
RELATED PRODUCTS
- Synchronous alternators of the Leroy-Somer range
*The Course is confirmed once at least 4 inter and/or intra company participants have signed up.
OBJECTIVES
After the training, the trainees will be able to:
- Connect AVRs (AVR range for low voltage alternators)
- Adjust analog AVRs
- Diagnose incorrect AVR operation
AUDIENCE
Attendance*: 2 to 4 participants
- Maintenance technician
Prerequisites: ALT1
recommended + Knowledge
electrical basics and electrical
risks habilitation
CONTENT
- Detail of the excitation systems
- Presentation of the AVR global range
- Presentation, parameter details, connections of the AVR
- Presentation of AVRs and additional modules
- Practical cases of use: voltage regulation, power factor,
KVAr, stability parameters
RELATED PRODUCTS
- AVRs: R220, R250, R438, R450, R449, ...
- Additional modules: R726, R731
OBJECTIVES
After the training, the trainees will be able to:
- Connect the digital AVR for low voltage range
- Adjust the digital AVR
- Diagnose incorrect AVR operation
- Use the Easyreg software
AUDIENCE
Attendance*: 2 to 4 participants
- Maintenance technician
Prerequisites: ALT1
recommended + Knowledge
electrical basics and electrical
risks habilitation
CONTENT
- Details of the excitation systems
- Presentation, parameter details, connections of the D510C
- Practical cases of use: voltage regulation, power factor,
KVAr, stability parameters and manual mode
RELATED PRODUCTS
- Digital AVR: D510C
*The Course is confirmed once at least 2 inter and/or intra company participants have signed up.
OBJECTIVES
After the training, the trainees will be able to:
- Connect AVRs (R610 and R630)
- Adjust analog AVRs
- Diagnose incorrect AVR operation
AUDIENCE
Attendance*: 2 to 4 participants
-M
aintenance technician
Prerequisites: ALT1
recommended + Knowledge
electrical basics and electrical
risks habilitation
CONTENT
- Details of the excitation systems
- Presentation of the analog range
- Parameters and connections of the AVR
- Practical cases of use: voltage regulation, power factor,
KVAr, stability parameters
RELATED PRODUCTS
- Analog AVRs of the R610 and R630 range
For medium & high voltage alternators
OBJECTIVES
After the training, the trainees will be able to:
- Connect and adjust digital AVRs for medium & high voltage (D610 and D630)
- Configure digital AVRs with SUPD600
- Diagnose incorrect AVR operation
AUDIENCE
Attendance*: 2 to 4 participants
- Maintenance technician
Prerequisites: ALT1
recommended + Knowledge
electrical basics and electrical
risks habilitation
CONTENT
- Details of the excitation systems
- Presentation of the digital range
- Parameters and connections of the AVR
- Operation of the SUPD600 software
- Practical cases of use: voltage regulation, power factor,
KVAr, stability parameters
RELATED PRODUCTS
- Analog AVRs of the D600 range (D610 and D630)
For medium & high voltage alternators
*The Course is confirmed once at least 2 inter and/or intra company participants have signed up.
OBJECTIVES
After the training, the trainees will be able to:
- Configure the ControlReg 200/200P
- Prepare starting up and installation on site
- Understand the Utility Software
- Run a fault diagnostic
AUDIENCE
Attendance*: 4 participants
- Services Centre
Prerequisites: Knowledge
Electrical engineering and
operating principle of the
alternator
- Genset manufacturer
- User
CONTENT
- Reminder on electrical magnitudes
- Basics on regulation
- Basic functions on communication with motor (CAN)
- Details on the LS Utility Software
- Details on configuring ControlReg 200/200P
- Use on generator set
RELATED PRODUCTS
- Low Voltage Shunt excitation range alternator
(excitation current below 4 A)
- ControlReg 200
11
CUSTOMIZED TRAINING
For more information (objectives, program, price, duration, attendance, location)
Contact us on +33 (0)5 45 94 59 03
AUDIENCE
- Maintenance technician
- After-sales department technician
- Services Centre
- Design office technician
- User, Operator
- Genset manufacturer
CONTENT
A flexible program adapted to your needs, focused on
maintenance of alternators in our workshops, for example:
- Maintenance program recommended
- Taking measurements
- Dismantling/reassembling alternators
- Using manuals, etc
RELATED PRODUCTS
- Type of alternator to be defined according to your request
TAILORED TRAINING
SPECIFIC PRODUCT
Alternators maintenance
ALT 3
CUSTOMIZED TRAINING
CUSTOMIZED TRAINING
We can design and organize custom trainings on the definition, selection, operation and maintenance of
alternators and AVRs products in order to meet your specific needs, whatever the context: new hires,
special projects, reinforcement on core competencies
The training can also focus on specific themes including:
- Grid Code
- Marine specifications
- Oil & Gas specifications
- Hydro specifications
- Maintenance optimization
For those tailored trainings we will work in close relationship with you to answer your needs and bring you
the very best of our expertise and know-how.
Those tailored trainings can be held at the Training Centre, at one of our factories or on your premises,
for groups up to 6 people.
13
POITIERS
PRACTICAL INFORMATION
GPS coordinates
N: 45 42,54.004 - E: 0 11,27.852
IBIS
Espace Htelier - 46 rue des Meneaux
16430 CHAMPNIERS
Tel. +33 (0)5 45 69 16 16
Training Centre
D910
IBIS STYLES*
Espace Htelier - 122 rue des Meneaux
16430 CHAMPNIERS
Tel. +33 (0)5 45 68 53 22
IBIS BUDGET
Espace Htelier - 122 rue des Meneaux
16430 CHAMPNIERS
Tel. +33 (0)5 45 90 38 80
FASTHOTEL
RN 10 - 16160 GOND PONTOUVRE
Tel. +33 (0)5 45 69 23 00
KYRIAD*
RN 10 - 16430 CHAMPNIERS
Tel. +33 (0)5 45 68 03 22
FORMULE 1
RN 10 - 16430 CHAMPNIERS
Tel. +33 (0)8 91 70 53 52
N10
N141
Zone des
Montagnes
BORDEAUX
COGNAC
SAINTES
LA ROCHELLE
LIMOGES
ANGOULME
Town Centre
MERCURE
Place des Halles - 16000 ANGOULME
Tel. +33 (0)5 45 95 47 95
LE PALAIS
Place F. Louvel - 16000 ANGOULEME
Tel. +33 (0)5 45 92 54 11
TERMINUS
1 Place de la Gare - 16000 ANGOULEME
Tel. +33 (0)5 45 92 39 00
EUROPEEN
1 place Grard Prot - 16000 ANGOULEME
Tel. +33 (0)5 45 92 06 42
*Special rates have been agreed for anyone attending training courses at the Leroy-Somer CFE, at the
KYRIAD hotel (+33 (0)5 45 68 03 22) and IBIS Style hotel (+33 (0)5 45 68 53 22)
14
CHAMPNIERS
N10
SCOPE OF APPLICATION
PRACTICAL INFORMATION
I-
VI- CONFIDENTIALITY
Both parties undertake to treat as confidential all technical,
commercial, financial and other information received from the other
party by word-of-mouth, in writing or by any other means of
communication during the negotiation and/or fulfillment of any
order.
This confidentiality obligation will apply throughout the fulfilment of
the order and for a further 5 (five) years after its expiry or termination,
irrespective of the reason.
VII- INTELLECTUAL PROPERTY
The Centre is the owner of the intellectual property rights to the training
courses it offers. All the materials and content used by the Centre,
irrespective of their form, shall remain the sole property of the Centre.
The Customer is not entitled to use, reproduce, transform, or exploit the
training materials within or outside of its company without the Centre's
prior written agreement. The Customer also undertakes not to duplicate
the training by dispensing it to another person, unless expressly
authorized to do so.
VIII-
DATA PROCESSING
The personal data that the Customer provides to the Centre pursuant to
and in fulfilment of the orders and/or sales may be sent to the Centre's
contractual partners for fulfilment of the orders. The French data
protection regulations (namely the data protection act [loi informatique
et liberts] of 6 January 1978) entitle the Customer to query, access and
correct personal data and to object to its use on legitimate grounds, by
sending an e-mail to: InformatiqueetLibertes.IALS@Emerson.com
IX- DISPUTES
THIS CONTRACT IS GOVERNED BY FRENCH LAW.
IF THE PARTIES FAIL TO REACH AN AMICABLE AGREEMENT, AND
NOTWITHSTANDING ANY CLAUSE TO THE CONTRARY, ANY DISPUTE
RELATING TO THE INTERPRETATION AND/OR FULFILMENT OF AN ORDER
SHALL BE REFERRED TO THE COURTS WITH JURISDICTION IN ANGOULEME
(FRANCE), NOTWITHSTANDING THE INTRODUCTION OF THIRD
PARTIES OR THE EXISTENCE OF MULTIPLE DEFENDANTS.
IV- ORDERS
The Centre will detail its training offer and prices in a Service Offer,
which will remain valid for one month after receipt of the Offer. On
receipt of the order or signature of the order form included in the Offer,
the Centre will draw up a training agreement.
V-
PRICE-PAYMENT
Prices are stated exclusive of VAT and are valid for the term of the
Offer or until a new catalogue is issued.
If training takes place outside the Centre, all associated costs such as
travel expenses incurred by consultants and trainers, room rental costs,
the cost of documentation and of and the rental of training equipment
(such as video recorders), etc. will be charged in addition.
CL /AB /15.05.2015V4
15
www.emersonindustrial.com
www.emerson.com/epg
Emerson 2014. The information contained in this brochure is for guidance only and does not
form part of any contract. The accuracy cannot be guaranteed as Emerson have an ongoing
process of development and reserve the right to change the specification of their products
without notice.
Moteurs Leroy-Somer SAS. Headquarters: Bd Marcellin Leroy, CS 10015, 16915 Angoulme
Cedex 9, France. Share Capital: 65 800 512 , RCS Angoulme 338 567 258.
5339 en - 2016.02 / c