Home
Fabrication
Products
Catalogs
Literature
Glossary
About Us
Contact Us
Select
Select
HereHere
Products
Products
Wire Products
Perforated Metal
Bar Grating
Aluminum
Carbon Steel
Stainless
TiteWeld
Stair Treads
Anchoring
Glossary
Safety Grating
Expanded Metal
Fiberglass Grating
Architectural Metal
BeamClamp
Kee Klamp
Handrail Parts
Catalogs
All bar grating must be firmly fastened in place with bar grating anchoring
products. Welding panels to the supporting structure provides a superior,
permanent installation. Although, for gratings that are subject to removal, they
can be fastened with Weld Lugs which are shop welded between the bearing
bars, or anchored with Saddle Clips.
In areas where welding or drilling is not permitted, Grating Clamps can provide the
fastening solution. These bar grating anchoring clips install on the top surface of
the grating and create a friction connection with the flange supporting the panel.
The narrow spacing of close mesh aluminum gratings allows for countersinking of
the bearing bars and fastening with flat head screws.
We carry a full line of anchoring devices, including: saddle clips, grating clamps, anchor blocks, Z clips, plank
clips, plank lugs, and countersunk lands for close mesh aluminum (special order).
Direct Link: Bar grating anchoring & fastener section of our catalog in PDF format.
Read More
We manufacture in
accordance with NAAMM
Standards.
Request a Quote
Grating Clamp:
A special friction fastener available in aluminum, stainless steel, and galvanized steel
used in conjunction with bar grating and embedded grating frames. (Note: Cross bars
may need to be snipped in the field to facilitate placement of bar grating clamps.)
Anchor Block:
Anchor blocks of 14 or 316 thick aluminum or steel may be shop welded by the
Z Clip:
The most versatile clip anchor available is the Z Clip. These clips are especially
helpful in holding down riveted grating. Z Clips are manufactured from stainless steel
and are available in 1 (1 and 114 grating) 112 (112 and 134 grating) and 2
(2, 214 and 212 grating) with a pre-punched hole to accept a 14 bolt or TEK
screw (by others).
Plank Clip:
A special friction fastener used in conjunction with plank grating and embedded grating
frames. When plank is banded plank clips are pre-installed.
Plank Lug :
A plank lug inserted and tack welded between flanges can serve as an anchor block
for plank grating. TEK screw fastener by others.
Countersunk Land:
For close-mesh aluminum grating (716 bearing bar centers) a countersunk land may
be drilled by the grating manufacturer for use with a 14 diameter TEK screw (by
others).
Tack Weld:
A positive method for anchoring all permanently installed grating. Welding is done in
the field by other than Direct Metals.
Home | Fabrication | Products | Catalogs | Literature | Glossary | About Us | FAQs | Contact Us | Request Quote | Survey
E- mail: info@directmetals.com Toll- Free: 1- 800- 711- 4939 Locations: Atlanta & Chicago
2013 All Rights Reserved. Direct Metals Company, LLC. Developed by: Cassidy Advertising & Belstar Media