Series FPG
With partnership
into the future
FUNKE is a leader in the development and production of quality heat exchangers with a heat transfer area of
up to 2 400 m. The range of products comprises shell-and-tube heat exchangers, bolted and brazed plate heat
exchangers as well as oil / air cooling units and electrical oil pre-heaters. Thus, as one of the few producers
worldwide, FUNKE offers solutions with optimum thermodynamic designs for different industries and virtually all
applications.
FUNKE focuses on customer orientation, highest quality standards, exibility and advisory skills important
benefits a company of just the right size is able to offer.
of two corrugated heat exchanger plates which are assembled in a 180 angle to each other. Back to back these are
laser welded alongside the sealing groove provided for
the gasket. The aggressive medium or the refrigerant runs
through the inlet aperture in this now created sealed ow
channel between the plates. In the entry zone, the grooves
of the plates have a special pattern so that the medium can
freely run into the cassette.
On the outside, each cassette is fitted with a gasket. When
the critical medium passes from one cassette to the other,
only two of the four ring gaskets at the apertures get in
contact with the medium. These two ring gaskets are made
of a special high resistant material. To ensure awless
sealing these gaskets in special design are twice as high
as conventional gaskets. Furthermore, in the entry zone of
the medium the profile of the gaskets are tapered on sealing ring and bridging piece.
Advantages
welded seam
Material
As standard, FUNKE heat transfer plates are produced in
1.4404 / AISI 316L. Alternatively titanium is available. The
thickness of the material is 0.6 mm (other materials on
request).
Combined gaskets:
Gaskets made of two different materials,
i.e. the ring gaskets are made of another
material than the main gasket frame
(e.g. chloropene for the ring and NBR
for the frame)
Applications
HVAC
Refrigeration Engineering
Chemical Industry
Sugar
Food
Marine
Power
Paper
Technical data:
max. allowable pressure: 30 bar
max. allowable temperature: 180C
min. allowable temperature: -35 C
Dimensions
Surface
area / Plate
m
mm
mm
mm
mm
mm
mm
FPG 16
0,16
933
310
694
126
128
250-1000
DN 50 / 2
30
FPG 31
0,30
1332
480
894
225
204
500-3000
DN 100
200
FPG 62
0,60
1835
620
1306
290
225
500-4000
DN 150
450
FPG 70
0,70
1740
760
1130
395
285
500-4000
DN 200
560
Plate type
L2
Connections
Max.
heat exchanger
surface area m
www.funke.de