Although the CMD44 and DSCM are passive devices they can be
automatically provisioned in a 6500 shelf ?
a) True
b) False
2. The dual OSC is:
a) A 44.7 Mbps Ethernet over SONET (EOS) communication infrastructure
b) A 155 Mbps Ethernet over SONET (EOS) communication infrastructure
c) A 622 Mbps Ethernet over SONET (EOS) communication infrastructure
d) None of Above
3. An Optical Domain (DOC) consists of how many DOC sites ?
a) 1
b) 2
c) 3
d) 4
4. Which photonic equipment does the re-routing of a pass-through wavelength
to an add/drop wavelength?
a) MLA circuit pack
b) SLA circuit pack
c) WSS s/OPM circuit pack
d) CMD44 module
5. When a wavelength spans across two Optical Domain, what needs to be
provisioned?
a) TX/RX adjacency in domain A
b) TX/RX adjacency in domain B
c) A photonic connection at domain boundaries
d) All of the above
6. Which equipment is required in order to perform add/drop operation in a 6500
Photonic network?
a) Dispersion Sloped Compensation Module (DSCM).
b) Wavelength Selective Switch (WSS)
c) 44 Channel MUX/DEMUX (CMD44)
d) Broadband MUX/DEMUX 1x2 (BMD-2) module
7. WSS to LIM adjacencies are not automatically populated upon OTS creation
a) True
b) False
8. Which 6500 circuit pack is not used for Terminal or ROADM configurations
(Ciena wavelogic 3 (WL3)100 G in the Viettel 1C backbone network ?
a) MLA/MLA3
b) CMD44
c) WSS
d) DSCM
e) None of the above
9. The Line Interface Module (LIM) provides a greater gain versus all other
amplifiers that are supported in the 6500
a) True
b) False
10.Which of the following 6500 Photonic Layer circuit packs is not required at a
Line Amplifier site ?
a) 2 x OSC circuit pack
which PM facility does the ORL Optical Return Loss (ORL) parameter apply?
Optical Monitoring (OPTMON)
Amplifier (AMP)
Channel Monitoring (CHMON)
20.Facility parameters can be found on which circuit packs? (choose the correct
answer)
a) CMD, LIM (SLA/MLA/MLA2/MLA3), WSS, OSC