1. SCOPE
A. This specification for the Butler-Cote 500
finish system covers the preparation, coating
and physical characteristics for the factory
applied exterior surface finish.
II. SUBSTRATE
PREPARATION
A.G-90 hot-dipped galvanized steel shall
be given a controlled chemical conversion
treatment.
III. COATING
A.The material for Butler-Cote 500 system
coatings shall be Fluoropon, a full-strength
70% fluoropolymer (Kynar 500 or
Hylar 5000) finish.
B. After preparation of the steel, the exposed
exterior surface shall be precision coated
with primer and Fluoropon color coat
to a dry film thickness of 0.9 mil minimum.
C.Exposed interior surfaces shall be coated
with polyester color coat.
D.All coatings to be applied to entire material
dimension of steel sheet prior to forming
of panels.
1V. PHYSICAL
CHARACTERISTICS
A.The physical characteristics of the exterior
coating shall provide resistance to failure
through cracking, checking, peeling or loss of
adhesion by the following laboratory weather
simulating tests:
1.Humidity Resistance at 1000 F. and 100%
R.H. in accordance with ASTM D 2247.
2.Salt Spray Resistance at 5% Salt Fog per
ASTM B 117.
3.Reverse Impact Resistance in accordance
with ASTM D 2794.
4.Resistance to Accelerated Weathering-in
an Atlas Model XW-R Dew Cycle WeatherOmeter in accordance with ASTM D 3361.
5.Resistance to Dry Heat.
Butler-C
Cote 500 finish system is
the best metal coating available.
It holds its original color longer
than silicone polyester or acrylic
coatings, even in the most punishing environments. Our 20-y
year
roof and wall panel warranty is not
prorated. Keep your building
looking new for years with the
Butler-C
Cote 500 system, a Kynar
500 or Hylar 5000 coating. Ask
your Butler representative for
more details on the Butler-C
Cote
500 coating system.
A HIGH
PERFORMANCE
FLUOROPOLYMER
COATING
The state-of-the-art
low-gloss exterior
coating used on all
painted Butler
Roof Panels
Wall Panels
Trim
Gutters
Downspouts
Butler Building products are constantly being improved; therefore, the information contained herein is subject to change without notice. Before
Original Color
After 8 Years of
Exposure
Level of Chalking
Allowable under
Warranty Terms
ASTM D4214
#10
#4
Warranty Period
20 Years
10 Years
www.butlermfg.com
A4742
ISO 9001
ROOF SYSTEMS
MR-2
24 & CMR-2
24
Birch White
WALL SYSTEMS
24 gauge
Birch White24 & 26 gauge Snow White24 & 26 gauge Marsh White
26 gauge
26 gauge
Terra Brown
26 gauge Burgundy
26 gauge
Birch White
Santa Fe Red
24 gauge Burgundy
24 gauge
24 gauge
BUTLERIB II ROOF
Birch White
Birch White24, 26, 28 gauge Hunter Green
Shell Gray
Country Wheat
Terra Brown
Country Wheat
Terra Brown
Burgundy
28 gauge
BUTLER THERMAWALL
Snow White
Shell Gray
Hunter Green
Burgundy
Lava
Evening Blue
Terra Brown
Birch White
Shell Gray
Light Gray
Polar White
For colors, gauges or color/panel combinations not shown, additional charges apply and a minimum order is required.
Fluoropolymer coatings are the standard exterior finish on all Butler painted panels.
For colors, gauges or color/panel combinations not shown, additional charges apply and a minimum order is required.
Colors shown are not representative of the actual finish colors. For accurate finish colors, please see your Butler
Builder for color chip samples.
Colors shown are not representative of the actual finish colors. For accurate finish colors, please see your Butler
Builder for color chip samples.