Gyptron IT-265
PRODUCT NO.
IT265
APPLICATION
SCALE INHIBITOR
SUPPLIER
EMERGENCY TELEPHONE
2 COMPOSITION/INFORMATION ON INGREDIENTS
Name
EC No.
CAS-No.
Content
Classification
Phosphonic acid
252-156-6
34690-00-1
10-30%
C;R34.
FORMALDEHYDE
200-001-8
50-00-0
< 1%
3 HAZARDS IDENTIFICATION
Causes burns. May cause sensitisation by skin contact.
CLASSIFICATION
C;R34. R43.
4 FIRST-AID MEASURES
INHALATION
Remove victim immediately from source of exposure. If respiratory problems, artificial respiration/oxygen. Get medical attention. Provide
rest, warmth and fresh air.
INGESTION
NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR DRINK FLUIDS! Immediately rinse mouth and drink plenty of water (200-300
ml). DO NOT induce vomiting. Get medical attention immediately.
SKIN CONTACT
Remove affected person from source of contamination. Remove contaminated clothing. Wash the skin immediately with soap and water.
Get medical attention promptly if symptoms occur after washing.
EYE CONTACT
Remove victim immediately from source of exposure. Make sure to remove any contact lenses from the eyes before rinsing. Promptly
wash eyes with plenty of water while lifting the eye lids. Continue to rinse for at least 15 minutes and get medical attention. To hospital or
eye specialist.
5 FIRE-FIGHTING MEASURES
EXTINGUISHING MEDIA
Water spray. Alcohol resistant foam. Carbon dioxide (CO2).
SPECIAL FIRE FIGHTING PROCEDURES
Avoid water in straight hose stream; will scatter and spread fire. Cool containers exposed to flames with water until well after the fire is out.
UNUSUAL FIRE & EXPLOSION HAZARDS
May travel considerable distance to source of ignition and flash back.
SPECIFIC HAZARDS
In case of fire, toxic and corrosive gases may be formed.
1/ 5
Gyptron IT-265
PROTECTIVE MEASURES IN FIRE
Wear full protective clothing. Use air-supplied respirator during fire fighting.
Std
LT - ppm
LT - mg/m3
ST - ppm
ST - mg/m3
FORMALDEHYDE
WEL
2 ppm
2.5 mg/m3
2 ppm
2.5 mg/m3
INGREDIENT COMMENTS
WEL = Workplace Exposure Limits
PROTECTIVE EQUIPMENT
ENGINEERING MEASURES
Explosion-proof general and local exhaust ventilation.
RESPIRATORY EQUIPMENT
Wear full face mask supplied with: Gas cartridge suitable for organic substances.
HAND PROTECTION
Use protective gloves made of: Rubber, neoprene or PVC. The most suitable glove must be chosen in consultation with the gloves
supplier, who can inform about the breakthrough time of the glove material. Be aware that the liquid may penetrate the gloves. Frequent
change is advisable.
EYE PROTECTION
Wear approved safety goggles.
OTHER PROTECTION
Wear appropriate clothing to prevent any possibility of skin contact.
HYGIENE MEASURES
DO NOT SMOKE IN WORK AREA! Wash at the end of each work shift and before eating, smoking and using the toilet. Promptly remove
any clothing that becomes contaminated. Wash promptly with soap & water if skin becomes contaminated. Use appropriate skin cream to
prevent drying of skin. When using do not eat, drink or smoke.
Liquid
COLOUR
Brown
RELATIVE DENSITY
FLASH POINT (C)
1.120 - 1.220 25
82
2.15 - 4.15
Gyptron IT-265
STABILITY
Stable under normal temperature conditions.
CONDITIONS TO AVOID
Avoid heat, flames and other sources of ignition.
MATERIALS TO AVOID
Strong oxidising substances. Strong acids.
HAZARDOUS DECOMPOSITION PRODUCTS
Fire or high temperatures create: Oxides of: Nitrogen. Carbon.
11 TOXICOLOGICAL INFORMATION
INHALATION
Harmful by inhalation. Harmful: possible risk of irreversible effects through inhalation.
INGESTION
Harmful if swallowed. Harmful: possible risk of irreversible effects if swallowed.
SKIN CONTACT
Harmful in contact with skin. Harmful: possible risk of irreversible effects in contact with skin. Causes burns.
EYE CONTACT
Causes burns. Risk of serious damage to eyes.
ROUTE OF ENTRY
Inhalation. Ingestion. Skin absorption.
12 ECOLOGICAL INFORMATION
ECOTOXICITY
The product contains a substance which may have adverse effects on waste water treatment processes.
LC 50, 96 Hrs, FISH mg/l
20-30
MOBILITY
The product is soluble in water.
BIOACCUMULATION
May accumulate in soil and water systems.
DEGRADABILITY
The product is potentially degradable.
WATER HAZARD CLASSIFICATION
WGK 2
13 DISPOSAL CONSIDERATIONS
GENERAL INFORMATION
Recover and reclaim or recycle, if practical.
DISPOSAL METHODS
Absorb in vermiculite or dry sand, dispose in licensed hazardous waste. Dispose of waste and residues in accordance with local authority
requirements.
WASTE CLASS
For this product, in accordance with the European Waste Catalogue (EWC), a catalogue number cannot be given because the customer
has to lay down the purpose first. The catalogue number has to be given according to the local waste removal processes.
14 TRANSPORT INFORMATION
3/ 5
Gyptron IT-265
PROPER SHIPPING NAME
UN NO. ROAD
1760
ADR CLASS
III
UN NO. SEA
1760
IMDG CLASS
III
EMS
F-A S-B
MARINE POLLUTANT
No.
UN NO. AIR
1760
AIR CLASS
III
15 REGULATORY INFORMATION
LABELLING
Corrosive
CONTAINS
Phosphonic acid
FORMALDEHYDE
RISK PHRASES
R34
Causes burns.
R43
S25
S26
In case of contact with eyes, rinse immediately with plenty of water and seek medical
advice.
S36/37/39
S45
In case of accident or if you feel unwell, seek medical advice immediately (show label
where possible).
S60
SAFETY PHRASES
UK REGULATORY REFERENCES
Approved Supply List.
STATUTORY INSTRUMENTS
Chemicals (Hazard Information and Packaging) Regulations.
APPROVED CODE OF PRACTICE
Safety Data Sheets for Substances and Preparations.
GUIDANCE NOTES
Workplace Exposure Limits EH40. Approved guide to the classification and labelling of substances and preparations dangerous for supply.
16 OTHER INFORMATION
REVISION COMMENTS
This is first issue.
ISSUED BY
MS
REVISION DATE
19/01/2006
R34
Causes burns.
R37
R40
R43
4/ 5
Gyptron IT-265
DISCLAIMER
The information provided in this SDS is correct to the best of our knowledge, information and belief at the date of its
publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation,
disposal, and release and is not to be considered a warranty or quality specification. The information relates only to the specific
material designated and may not be valid for such material used in combination with any other materials or in any process
unless specified in the text.
5/ 5