SERVICES
CERTIFICATE OF TEST & THOROUGH EXAMINATION OF WINCH
SYSTEM
Certificate #
Owner
Equipment
17101-001
ZP Arabia Drilling
Desc
ripti
on
Location
Owners ID / Serial No
Motive Power
Manufacturer
Wire Rope Details
Additional Cert
Ref. Standards
Air
Model
Taian Juling
Date of Manufacture
F 4155, Dim: 16mm X 130mtr. SWL: 3.3 t
N/A
Defect Report (If Any)
ASME B30.7
S.W.L
(Kgs)
3,000 Kgs (3.0 t)
Rig # Sino-45
321414
Test Load
(Kgs)
3,000 Kgs (3.0 t)
Last Inspection
02-Nov-2015 by
ECI
28-Apr-2016
29-Jan-2016
28-Jan-2017
Corrective Action
( If any)
Inspector
29-Jan-2016
None
Ejaz Ahmed
Stamp
NDT Details
(If Any)
N/A
This certificate is granted subject to the condition that is understood and agreed that nothing herein contained shall be deemed to relieve any
designer, manufacturer, seller, repairer or operator of any warranty, expressed or implied and AlMansoori liability shall be limited to the willful
negligence or deliberate omissions of its employees. Under no circumstances whatsoever, shall AlMansoori be liable for any injury or damage to
any person occurring by reason of negligent operation or any defect in materials, machinery, equipment or other items other than those defects
ascertainable by normally accepted testing standards and only those items actually inspected by AlMansoori and which are covered by this
certificate.
F.1017
27-12-09
ALMANSOORI INSPECTION
SERVICES
CERTIFICATE OF TEST & THOROUGH EXAMINATION OF WINCH
SYSTEM
THIS IS TO CERTIFY THAT, a competent person did attend the above mentioned owners work
location on the date shown above and the equipment described in this report was tested & inspected
according to the relevant international standards & LOLER as well as the requirements of Saudi
ARAMCO Specifications. The result was found Satisfactory at the time of Inspection and considered Safe
for Lifting.
This certificate is granted subject to the condition that is understood and agreed that nothing herein contained shall be deemed to relieve any
designer, manufacturer, seller, repairer or operator of any warranty, expressed or implied and AlMansoori liability shall be limited to the willful
negligence or deliberate omissions of its employees. Under no circumstances whatsoever, shall AlMansoori be liable for any injury or damage to
any person occurring by reason of negligent operation or any defect in materials, machinery, equipment or other items other than those defects
ascertainable by normally accepted testing standards and only those items actually inspected by AlMansoori and which are covered by this
certificate.
F.1017
27-12-09