Anda di halaman 1dari 29

SOFTWARE APPLICATION FOR

QUANTITY SURVEYING REPORT


Group:
Muhd Hasif bin Alias 0316413
Gregory Ho Fung Cheang 0321793
Liew Yong Sheng 0315108
Lee Kim Thiam 0310710
Wong Geng Sen 0321690
Lecturer:
Miss Lim Sze Shwan

Table of Contents

Introduction

Part A-

Solibri Model Checker


AutoDesk Revit

BIMMeasurement

CostX

10

Recommendation

13

Part B-

14

Preparation stage
Design stage

16

Preconstruction stage

18

Construction stage

21

Others

24

Reference

27

INTRODUCTION
Over the course of human construction history, the process of construction gets more
systematic. In time, technology advances and brought software to the table when all the
while Quantity Surveyors at its time uses purely calculator and scale ruler purely for the
measurement of building and costing.
Architects were introduced with AutoCAD developed by Autodesk in 1982, which is 33 years
ago in 2016, and were able to provide Quantity surveyors measurement needed to get the
tendering of document easier. However, as time passes on, construction industry realizes
that they need more than just AutoCAD, as mentioned in BIM Handbook; A Guide to Building
Information Modeling for Owners, Managers, Designers, Engineers and Contractors by
Eastman.C, Teicholz.P, Sacks.R and Liston.K, The design and coordination with 2D CAD
system is error prone, labour-intensive, and relies on a longer cycle times.
The introduction of Building Information Modeling, or BIM, allows virtual construction in
nearly all stages and aspect in construction industry. From scheduling of construction to
prediction of outcome and prices as well as checking details designed by engineers and
architects.
In this report, we will introduce four BIM software programs that are available in the
construction market that would best aid Quantity Surveyors in our interest of taking off and
so forth. The four BIM software are:

Solibri Model Checker

AutoDesk Revit

CostX

BIM Measure

Additionally, we will also compare the benefits and restrictions of BIM, CAD Measurement
and Manual Measurement in all of the construction stages.

Solibri Model Checker

As the name suggests, Solibri Model Checker is Building Information Modelling software that
aids in checking the model in three dimensional spaces based on the standards, protocol,
regulation and the best practices configured by the company that uses it. The software,
generally speaking, validates that the data required exists while also place in check that the
data provided is correct, aiding user to bring builder a greater assurance as well as quality of
the building. The components of which it inspect are components, context, relationship to
other pieces of components, description provided by the designer, attribute as in structural
data, constraints, classification and metadata.
Function
Solibri Model Checker helps you find and visualize issues and problems before and during
construction. It will also provide a wealth of information that can be taken off throughout the
buildings life-cycle and utilized for needs that include area calculation, accessibility and
building code compliance.
Solibri.com

1. Automated Analysis and Checking


One of the key functions of the software is its ability to check potential design issue in the
3Dimensional visualization model. Unlike any other software, the Ruleset manager can
be used to customize rule and rulesets for model checking, making the rules more
flexible based on the standards and laws of said region. The software also provides
model revision comparison between previous project and current project to meet said
standards and quality. More importantly, it also checks escape route for the building. The
design issues are categorized into groups based on how severe the problem is.
2. Presentation and Communication
The software allows user to collectively create a presentation slide for the problem
issued within the software making the communication towards designer easier. The use
of BCF file format would directly bring designer right away to the problem issued by the
software. Reducing the time needed to find the issue within the building especially if said
building is extremely complex in design.
3. Information Take-off and Reporting
Solibri Model Checker also provides basic quantity calculation service such as
dimensions, area and volumes. Listing functionality is customizable and could lists any
property for any set of component within the building. The listing is also integrated with
3D view with visualization and zoom-in ability.

Limitation
The general limitation of the software is not critical. Due to how new the software is, the
software currently could not add in slides to an existing presentation. In a journal of an
architect, McCune.M , he complained that the software do not have a categorization of
results. The software also automatically creates folder for user based off of things unknown
to use. Most of the time, it is the level of the object that are in the first column of Checked
column. The software also do not allow reorganization of results like Navisworks. This
problem would create unnecessary confusion and waste of time.
The only most critical limitation that is mentioned by Director Alan Baikie is, although is one
of its strongest point, its ability to flexibly change rulesets in the Ruleset Manager. While the
idea is to allow company to construct based on standards and regulation of the region they
are in as well as the protocol of the company, it is also possible for errors in the rules made
in the management system. A single error within the ruleset would be disastrous to the entire
project since the entire projects correction was based on the rules. The one way to avoid the
worst possible situation is to check the rules configured.

AutoDesk Revit

Autodesk, Inc., is a leader in 3D design, engineering and entertainment software. Since its
introduction of AutoCAD software in 1982, Autodesk continues to develop the broadest
portfolio of 3D software for global markets. Its product, AutoDesk Revit BIM software is
peculiarly built for Building Information Modeling (BIM), which provide tools for architectural
design, MEP engineering, structural engineering, and construction, and allows coordination
between disciplines.

Function
Bim interoperability

Revit imports, exports, and links data with commonly used formats, including DWG, DXF,
DGN, and IFC.

It uses existing geometry in a linked Industry Foundation Classes (IFC) model as a reference
for dimensions, alignment, snapping, and hosting of some face-based families in a Revit
model. When linking an IFC file, its elements are assigned to a default phase, further
integrating open standards into Revit.

Autodesk supports BIM interoperability and open source data exchange methodologies,
including IFC. Revit 2017 has been certified by BuildingSMART International for IFC version
2.0 Coordination View import and export.

Revit Server

It aid project teams to collaborate more easily on shared models across a wide-area network
(WAN) using Revit Server. Sustain an integrated collection of central models on a single
server that can be accessed from local servers.

Built-in redundancy served as protection in case of WAN connectivity loss.

Construction coordination
Cloud-connected office-to-field workflows using BIM 360, a Cloud-based collaboration
service system. Autodesk allow 24/7 access to project data throughout the building
construction life cycle as well as authorized those in the field to better anticipate and act, and
those in the back office to optimize and manage all aspects of construction performance.

Autodesk Exchange add-in applications

Extend Revit functionality with add-ins and an expanded content library. Buy(Some are free)
and install directly from the web into an active Revit session for more efficiently author datarich Building Information Models. Allowing user to create an all-in-one software.

More flexible Annotation Tags & Modernized text layout and editing

Create a tag with a calculation (easier to find).


Communicate designs more efficiently with new what you see is what you get editing
providing extra features to increase user control, including:

1.

Edit in-canvas.

2.

Set all text to upper- or lower-case.

3.

Add spaces between bullets.

4.

Create lists with multiple levels, indents, and numbers.

Limitation
From the research and review provided inside the internet, there are no clear limitations
since its last update of AutoDesk Revit 2017. There are limitations about the software
system, however, these are not something that should be consider as major problem for a
BIM system:-

1. Big system requirement (over 15GB space).


2. A fussy program even for experienced worker (take times and patiences).

BIM measurement
BIM measurement is a software program that allows users to visualize the building even
before the construction has begun. The software also provides users to share updated
information to each department at ease should there be any changes on the project.
Causeway has come up with one of the BIM software. It provides the ability for users to
measure directly from drawing models be it in 2D, 3D or BIM format. It is also able to
integrate with cost planning, taking-off and billing designed for cost consultants as well as
contractors.

Functions
Measurement.
To measure the lengths, areas or volumes of the building, BIMMeasure is able to support
drawings from DWG, DWF and DWFx files. Not only that, BIMMeasure also supports
drawings from IFC format. Image formats like bmp, gif, jpg and tif is also compatible for
BIMMeasure. Different varieties of file format allow users to use the software with more
convenience since some drawings they receive may not only be in one format.
Multi-file support
BIMMeasure is also able to support other files such as Raster format image files or even
PDFs as image files. Entity measurements for model files are also made possible using the
software.
Auto-scheduling
Grouping of the similar items are enabled using BIMMeasure. Examples of similar items
could be concrete grade 35 and concrete grade 40 in slabs or columns. Multiple schedules
can be easily handled by the software so the work done will be a neat and tidy. This
eliminates the hard work of manually calculating each item one by one.
Slicing
Slicing the images in 2D or 3D up to 3planes is also possible with BIMMeasure. This
function enables users to discover interesting regions that are not discovered. What is even
better that measurement can be done on the sliced planes.

Limitations

1. Team communication. Since changing designs are made a whole lot easier, clients
may constantly change their ideas of the building. This will cause some department
of the project to be left out of the updated information causing some
misunderstanding between the departments.
2. Expensive cost. The start-up cost may be too high for some contractors to purchase
it. This will cause them to lose out on the market trend since most contractors,
engineers or architects are using this software. By not being able to purchase the
software, these contractors may be laid off from their jobs.
3. Training. As with all new technology, there will be needs to discover the software
more thoroughly. Companies may spend a lot of time just for everyone in the
company to get used to the software. There will also bound to be some functions that
users may not be able to access to since they are not used to the software.

CostX
Since the late 20th Century, the construction industry has begun to use electronic
information in project. In time, most of the QS firm have embraced electronic measurement
appropriately because it could provide the most efficient in terms of productivity, particularly
if drawings can be provided in an agreed layering convention the moment CostX, a product
of Exactal- the new-generation estimating software, came out. It contains numerous
additional features to increase ease-of-use and speed of taking off. CostX is Exactals topof-the-range product where many companies are using it for their complete estimating
solution and are demonstrating strong returns on their investment. Besides that, CostX is
also a powerful project costing tool that enables estimators to utilise the most advanced onscreen measurement system while embracing BIM to deliver better results to clients. It can
reduce take off time by up to 80%. Here are some of the key features of the software and it
functions.

Functions

2D Takeoff
By using CostX, it can support scanned, PDF or CAD drawings and 3D models/BIM without
the need to buy CAD software. Not only that, it also supports various drawing file formats
such as, SKP, SWG, DWF, DGN and IFC. This allows quantity surveyors to extract
quantities and measure through existing project drawings since it is compatible with any
industry standard drawings including Revit support and do on-screen measurement for
taking-off quantities. Letting technology do its part in removing manual entry tasks and the
possibility of human error allows for a productive back office and streamlined process.

3D / BIM Takeoff
By using 3D taking off, it enables them to visualise their measurement in 3D, leveraging the
latest developments in automated take-off so that they can populate their cost plan. This
allows the QS have a more accurate estimate quantities and costs compare to traditional
measurement. The database information from 3D model view and 2D plans, sections and
elevations can be utilize by QS to initiate quantities mechanically and improve on the
database quantities with additional measurement of 2D or 3D drawing sheets. Besides that,

3D view helps users to visualize and understand the drawing have a general idea of the
building before build.

Workbooks
Powerful spread sheet based workbooks are live-linked to the drawings. It can used to
create or authorize information about the facility. It allows the user to do BQ at the same time
while doing the measurement. It can transfer all the data from the measurement directly to
the BQ workbook to eliminate errors and improve accuracy. This also makes the user have a
better control of all data information for checking in a more easy way compared to traditional
measurement. In addition, workbooks allows for retaining a history of job costs gives the
estimator the tools necessary to adjust future estimates and avoid costly overruns, or to
point out cost-saving procedures.
.

Auto-Revisioning
This is one of the unique functions of CostX where it has the ability to compare and review
the contemporary drawings with the previous one and highlight the changes that is being
made. This function allows the user safe plenty of time and fastens the work. Autorevisioning function will continue by creating an audit trail likewise revises the previous
quantities and workbooks as well as updating the latest quantities.

Subcontractor Comparison
Subcontractor comparisons workbooks can be generated in CostX allow the user to
compare with the subcontractors information. Subcontractor Comparison system able to link
the report and quotation detail of every subcontractor and allow the user have better view
and make comparison with one another about the cost and quality.

Network Capability
Network capabilities allow multiple users to work on the same project at once. Allow the
users fasten the work and safe time. At the same time, if there are any changes of the
project or building, user just have to update and make changes in the software and update
other team member to take noted. It is more efficient compare to traditional way where
users do not have to reprint the drawing or detail for every team members.

Paperless Estimating

In the traditional way of measurement, company will have to use countless paper for drawing,
measurement, billing paper and so on. At the end the project, we will have tons of paper and
we will have to send it to client or person in-charge of the next procedure. Sometime these
tons of paper actually bring trouble and difficulties for user to find the information. CostX is
impending to go-green by ensuring reports and estimates to be viewed without any printing
of paper. When received the drawing, the user is able scan the drawing into CostX and all
measurement and estimate are done in the software. In addition, CostX Viewer enable
CostX projects can be shared to other users mainly the client in an easy-to-use format.
These projects can be viewed by the client anytime and anywhere without the requirement of
running CAD software.

Projection View
One of function of CostX, while measuring, are allowing user to illustrate the building in a
3D structure. This help user to visualize what he have done measuring for the building and
altering windows, doors and walls at the same time in one dimension.

Limitation

Initial setup cost


It is obvious that the software is not free, company will have to pay for the software and
install in every computer. To allow the software to run smoothly during work there are
some requirements for the computer like certain grade graphic card, ramps and so on.
All these actually need an extra cost for the company for setup the software. Besides
that, to master or allow workers to fully control over CostX it actually needs someone
professional having workshop to teach the workers. Hence, it is another cost need when
the company have no one who literate the software.

Rebar detection
while measuring rebar in CostX, the main reinforcement bar of the beam or column
could not be detected by using the software. Bents for mesh fabric reinforcement (BRC)
cannot be detected in CostX as well hence the users will have to measure the length of
fabric reinforcement of the whole beam or column assuming it is the reinforcement bars.

Projection of windows
All windows are illustrated at the bottom of the wall when using 3D view. CostX cannot
show the exact location of the window 3D view. Thus, the price of fixing window might

be fluctuated because the contractor does not know the exact height allowance for the
window by look at the drawing.

Recommendation
By the end of the research and discussion, we have come to a conclusion that perhaps the
best BIM software among the four of which we have introduced earlier is BIMMeasure by
Causeway.

Both Solibri Model Checker and Autodesk Revit are two powerful tools that are better in
other functions. For example, Solibri Model Checker have an astounding ability to check
issues that is made in drawings, measurement or calculations whereas Autodesk Revit is
powerful software used to generate design for architects, MEP planning and engineering
details. However both of which are not specifically made for Quantity Surveyors main tasks
such as measurement and taking off. CostX on the other hand, although powerful to
Quantity Surveyors, is not as powerful as BIMMeasure by Causeway.

The software BIMMeasure by Causeway has the ability to automatically come up with
measurements in a few simple clicks. For example, to measure a square room, upon
clicking the element necessary, only three clicks is needed to measure the area of the
whole room. In CostX however, the user is required to type in the elements, click four times
and then the click enter. The main reason of why the software is so simple is because
BIMMeasure allows the configuration of measuring rules which the system uses to
automatically calculate based on measurement provided including irregular shapes.

The software allows 3D visualization for the entire building making it easier to visualize the
entire building. This includes that ability to cut the building into section at any length or part
of the building for easy viewing. By click and dragging the section lines, user are able to see
nearly every part of the building. In CostX, it is required to put in every file into the system
which is a very tedious process.

The software also automatically creates Bill of Quantities, Tender Pricing and so forth based
on the information the user have keyed in. Making the process of tendering a lot more faster
as well as easier to refer back to for checking.

Preparation/Briefing Stage
This is the earliest stage in construction. During this stage, consultant QS have to
estimate the cost and works for the project, feasibility studies according to the drawing of
the client and deciding the method of procurement system. In this stage, every decision
make will bring a great affect to the entire construction. As a quantity surveyor, we are
asked to give the best recommendation for the client and prepare a budget for the client
based on total capital cost expenditure. There are software available for QS to enhance the
efficiency and accuracy of work for example Building Information Modelling (BIM), CAD
Measurement and also the traditional way manual measurement. Different system will have
their own benefits and also constraints as show as below.

Building Information Modelling (BIM)


Benefits
3D model visualize
BIM software allows the design team on a project construct a 3D model that represents their
idea. It actually help the team members have a better understanding of the building idea
and allow the contractor have a rough idea of what he should prepare and forecast the
challenges face during construction.

Capture Reality
Before the construction get started the team will have to start aerial imagery and digital
elevation, along with laser scans of existing infrastructure, accurately capturing reality and
greatly streamlining project preparations. With BIM, designers can have all of that input
compiled and shared in a model which helps contractor to understand the site conditions
and forecast the problem might face.

Constraints
Initial Cost
The cost to obtain any BIM QS computer software is very expensive. It is very common that
newly built companies do not have enough capital or money to buy this software to help
ease their work. Besides that, to master the software there is a need of training which incurs
cost and time for the company.

CAD Measurement
Benefits
Better visualization than manual measurement
CAD drawing is electrical drawing where will not bring confusion on drawing style and faded
in writing. CAD able to bring a better visualization for the team member to understand the
idea compares to hand drawing and allows the user to alter the size and resolution of the
drawing.

Constraints
Initial cost
It is the same as the BIM software where the company will have to pay for the software and
training for the company. Hence it may cost a large amount of money which not every
company have the capital to afford.

Manual Measurement
Benefits
Cost effective
Manual measurement is the cheapest method compared to the other two measurements
where it does not need any initial cost like installation or training. The mainly cost of manual
measurement is only based on printing work hence it safe a lot of money compare to using
software.

No training needed
Every graduated quantity surveyor have already exposed to manual measurement which it is
the core subject of QS course. In this sense, company does not need any extra training for
the worker on manual measurement because it is understood they already excel in this area.

Constraints
More time consuming
Human manually measuring will take more time compare to software measuring which
human may make calculation mistakes due to drawing faded or unclear and human error.

Design stage
BIM
Benefits
BIM software is able to capture the existing condition of the site so that the team will have a
good idea on how they should design the building. BIM is also able to reduce wastages on
drawing papers since the design of buildings can be easily edited and changed. Since
editing is a lot easier, users may be able to take in the different ideas and dreams of the
clients to be made into a reality. BIM software is also able to visualize real life effects such
as the sunlight or wind directions or even the seasonal changes in some countries. This will
give architects a good idea on where the building should face to provide for the clients
requirement. Clashes of electrical circuit can be detected early in the beams or slabs
preventing conflicts that are bound to happen in tense moments.
Constraints
Similarly to CAD, BIM software also requires the users to be well accustomed to the
software and programs. If users are not familiar, they may even slow down the construction
process instead of speeding it up. There are also possibilities that some of the contractors
may not be able to purchase the software causing them to lose out on a lot of job
opportunities. This is because the start-up cost for this software is too high for them causing
them in the missing opportunities.
CAD Measurement
Benefit
Design models can be designed more quickly. It is able to eliminate the time consuming
process of editing the designs that the clients may change due to a sudden change in mind.
By using CAD, costly mistakes may be avoided since engineers may be able to test the
strength and durability of the building materials. Documents can be printed out in various
forms for multiple users. For example, the contractors for upper floor slabs may start
planning on what they should do while contractors for the elevator service may also plan
their workload at the same time. This will greatly shorten the duration of the construction
process since the contractors do not have to wait for other contractors to finish their work
before they could start their own. Complex technical elements can also be easily visualized
to increase the understanding of the team and prevent miscommunication.

Constraints
For CAD software, there will be some users who will be misusing the functions and ability of
the software. This may be because they did not get enough training and understanding of
the software before using it. This will cause the construction team to face difficulties while
constructing the building since there was something wrong during the design stage.
Manual Measurement
Benefit
Users do not need to be computer literated to operate these measurements since this
method does not or requires little use of the computer. Senior shareholders may also find it
easier to understand the measurements since they are more used to the traditional method.
Another benefit of using the manual measurement is that companies do not have to fork out
a large amount of money to purchase the software and to get the staff the training they need
to operate the measurements.
Constraint
Time is a major factor in the disadvantages of manual measurement. Since it is all done
manually, work will be very troublesome and tedious should a change in design arise.
Personnel in charge may need to remeasure everything that has already been done yet they
may still not find the mistake in the calculation should there be any. Work done may not be
organized since amendments are bound to happen. To redo everything neatly will again be
time consuming. Sharing of information will also be another disadvantage of manual
measurement. Since there will only be one original copy of the drawings, departments may
need to reprint the drawings so that it saves them time from doing the measurements.

Pre-Construction stage
Going past the designing stage, the project still needs to be planned accordingly to ensure
construction are to be constructed accordingly to schedule, budget and as well finding the
right person to get the job done. In this stage, contracts between client and consultant are
made, documents are finalized, and budget and schedule are also settled. Within the
company, a Quantity Surveyor is definitely involved with the pre-construction stage along
with other professionals in a process of constructing a structure. They are to bring Bills of
Quantities as well as suggesting the best contractor for the project provided to the client to
ensure integrity and efficiency for the job. The method of coming up with the Bills of
Quantities are also affected by the software, or the lack thereof, they use which will affect the
accuracy of the bills.
Building Information Modeling
Benefits
Production Time
Due to the feature of which BIM offers, time required to calculate built-up rates such as plant,
labour cost and also material cost has been reduced noticeably. Another effect this brings
was, thanks to the ability to take-off automatically as well as estimation, the time needed to
complete the pricing based on the measurement is reduced substantially.
Quality
It is certain that the use of BIM would provide opportunity to quantity surveyors to provide
better cost estimates based on actual elements provided digitally. Inaccuracies, if correctly
configured, can be easily removed by using BIM. Henceforth, it could not only reduce errors
but also improve the quality ratio of the project.
Constraints
Contract Requirement
With the intention to reflect shared responsibilities in obtaining information as well as aligning
duties, there are a few changes needed for the implementation of BIM. Henceforth,
submission of building plans in these formats to authority is not assured, making the use of
BIM software.

Legal Responsibility
Problems made in BIM will have their faults pushed from one party to another due to the fact
that the software do not have a standard guideline nor does it have a contract within that
dictates the true party at fault.
Configuration of automationEven though the ability to automatically create a taking off reduce the time of making a
tender document, the problem would arise if the configuration of the automation itself is
wrong. This would mean that all that is checked correctly by the software would be wrong
even though it is right creating a disaster that would take greater time and cost to solve.
CAD Measuring
Benefits
AccuracyDue to the fact that CAD drawings are drawn in actual size, measurements collected are
more accurate. This means that error of quantity caused by using the wrong scale is
impossible.
Data ManagementManagement of data of project can be done effectively using CAD software. Data managed
are classified as graphic and non-graphic. Graphic refers to the drawing of a project while
non-graphics refer to data that are not drawing related such as specifications and quantities.
They are all grouped and arranged systematically, allowing quantity surveyors to refer to
these data easily and quickly. With the data in store, cost analysis can be easily done at the
stage. Should there be any changes needed to be made by the architect or engineers,
quantity surveyors could easily change the cost estimates and could be completed in shorter
period of time.
Constraints
Limitation of Usage
In order to generate the Bill of Quantity, all quantities need to be transferred manually or
exported to software to generate quantity. This is because CAD software is limited to only
measure the quantity than compiling them professionally. This could be troublesome, time
consuming and also risk mistakes during the transfer of data.

Manual Measurement
Benefits
Flexibility in workflowSoftware is made in such a way where they need to follow certain steps to get things done.
However, manual measurement allows quantity surveyors to work in however workflow they
are comfortable with thus making workflow more fluent within company. This method is also
more suitable to situations that are not expected by the software because of its flexibility as
well as changing or working according to rules and regulation of region.
Constraints
Production Time
Owing to the fact that quantity surveyors are to write all the calculation of elements as well
as descriptions within bill of quantity, it will take a great deal of time to complete especially if
the building are complex and have a lot of drawings to work with, making this method
actually not cost effective.
Errors
Considering the amount of work need to be done to make a bill of quantity for a complex
building, it is no doubt there will be errors in either calculation or writing of description such
as miscalculate of measurement or grammatical and spelling error. Not only does this
increases the time needed to get the Bills of Quantity done, it is, once again, not cost
effective.

Construction Stage
When a construction begins, the quantity surveyors major tasks are to conduct and attend
meeting for review of progress to keep track of updates and changes. They are to also
provide the schedule as per requirement of client and practical applicability. The preparation
of cash flow data (interim payment) so that the client can arrange the finances required for
each stage of the project are also one of quantity surveyors responsibility. Estimation cost
effect (variation evaluation) when changes to the project occur like delays and agree on
variation with contractors appropriately and the responsibility to resolve disputes between
clients, designer and building contractors are one of quantity surveyors greater job scope.
Building Information Modelling
Benefits
Efficiency to variation
BIM software has the ability to identify the changes and errors within drawing and is able to
make amendment in one click.
High Accuracy towards resources
Quantities extracted are accurate, specific and also in proper to reduce waste in terms of
labour, cost, time and space of which are limited and should be used efficiently.
Great project facilitator
BIM is capable of creating or following up projects activities, cost and time schedule when
updated and also being able to provide overall visualization for worker involved.
Constraints
Expense
The use of BIM software is expensive in everywhere. Not only does it require training
because of how tedious of a program it is. Companies also need to pay softwares initial and
monthly subscription price. Most BIM software takes a great toll on the computer system and
therefore requires a good computer with stronger processor and a large amount of digital
space.

CAD measurement
Benefits
Clarify of Output
CAD measurement is easier for worker to understand the design and measurement,
reducing the misinterpretation and uncertainty when reading a plan.
Accurate Measurement
Drawings can be measured accurately because due to its actual size for the drawings be it
regular or irregular in shape.
Standardization procedure
It standardized procedure between companies in the industry in terms of designing, drafting
and documentation for clarity.
Constraints
Expenses
The software are individually priced and are expensive. Operators must update his skill
along with the release of CAD software updates and patches.
Function Limitation
CAD measurement is limited to measuring quantities only.
Manual Measurement
Benefit
Cost effective
There is no need for training since even students are already familiarized with manual works
also; there is no extra cost for machinery or software except for printing paper format for
inputs.
Constraint
Production speed

The progress is slower with addition to delay due to changes and error including the time
needed for checking and amendment. Time consumption due to the absent of 3D, 4D and
5D system capability in software.
Output accuracy
Cost data can only accept error of about 10%, meaning that the measurement have to be
correct, which is difficult to ensure and tedious work to do manually. Cost data price is
constantly changing, making input have to be constantly updated.

Others
A quantity surveyor is required to prepare the summary of the final account draft along with
the final account report. The report must be submitted on completion of the defects period.
With reference to the RIBA plan of work, it is stated that after the construction phase, there
will be the handover and close out phase. After that, there is the final phase which is in
practical use.
Handover and Close Out
Within the handover and close out phase, a project or a building is handed over back to its
rightful owner which concludes all aspects of the Building Contract. This phase focuses on
the successful handover of the completed building or project. Besides that, the contract
between the client and the contractor ends off, followed by performance evaluation and
feedback which can be used in future projects. The Schedule of Services must align with the
procurement and handover Strategies to confirm the services that are required to be carried
out. At the end of this phase, a final account will be produced and a final certificate of
completion will be awarded.
In Use
This phase states the duties carried out within the Post-Occupancy Evaluation as well as
reviewing of Project Performance. Any additional activities or services may be required as
based on the terms of the contract which was concluded along with the accordance to the
Schedule of Services. If required, services provided will be classified under an "as-need"
basis.
Building Information Modelling (BIM)
Benefits
Efficient data management
One of the very common points shown by BIM is its efficiency in managing tremendous
amounts of data. This software platform allows the storage of information of any project. It
assists users in updating the building manual, technical guide and health and safety files
simultaneously.

Easier management and operation


It also helps in recording and archiving of costs and schedules for future projects. It is
practically easier to manage and operate as it allows users to anticipate and manage
building projects without even having to implement a lot of operation and maintenance costs.
Constraints
Need for coordination between contractor and designers
This software platform requires major involvement of the contractor to coordinate during the
design stage.
CAD Measurement
Benefits
Data management
Solely being its only main attribute, the CAD software is known for its data management
capabilities. This software helps with organization and management of data for project teams
to use. It is ease the changes of design during the construction phases and following up into
the final account, which can be completed using the data stored.
Constraints
Requires skilled personnel
Improper use of blocks and layers may lead to consequential error during the updating of
changes in design.
Manual Measurement
Benefits
Cost effectiveness
This method is by far, the cheapest method to uphold in comparison to BIM and CAD as
incurred costs only apply for printing of documents. BIM and CAD are basically more
expensive as their software are to be purchased prior to usage.

Low training requirements


Graduates must start off with manual measurements before moving on to the construction
industry, thus already possessing the necessary skills for manual measurement. Firm that
implement major usage on softwares must put in more cost and time to train fresh graduates
in learning how to use the firms' software of choice.
Constraints
Manual Measurement
Lower quality and accuracy of data
Hard copies have to be manually worked out and due to the existence of human error
probability, quality and accuracy of the data produced may not suffice to standard.

REFERENCES
1. Sean, B. D. (2016, April 21). Five Standout Features from Autodesk Revit 2017.
Retrieved April 28, 2016, from
http://www.architectmagazine.com/technology/products/five-standout-features-fromthe-newly-released-autodesk-revit-2017_o
2. A Model of Efficiency. (n.d.). Retrieved May 11, 2016, from
http://www.btc.co.uk/Articles/index.php?mag=Cad
3. Advantages of CAD Modeling at the Design Stage of Development - Seifert
Companies. (n.d.). Retrieved May 11, 2016, from
http://www.seifert.com/blog.aspx?id=advantages-of-cad-solid-modeling-at-thedesign-stage-of-development#sthash.kp9im33u.dpbs
4. Article : Advantage & Disadvantage of CAD. (n.d.). Retrieved May 11, 2016, from
http://www.paper2dwg.com/articles/advantage-disadvantage-cad.htm
5. CostX. (n.d.). Retrieved May 11, 2016, from
https://www.exactal.com/en/products/costX
6. Home. (n.d.). Retrieved May 11, 2016, from https://www.exactal.com/en
7. Solibri Model Checker - Solibri. (n.d.). Retrieved May 11, 2016, from
https://www.solibri.com/products/solibri-model-checker/
8. The Legal Risks of Building Information Modeling (BIM) | Construction Law Signal.
(2010). Retrieved May 11, 2016, from http://www.constructionlawsignal.com/bysubject/design-and-technology/the-legal-risks-of-building-information-modeling-bim/
9. Video Tutorials. (n.d.). Retrieved May 11, 2016, from
http://www.exactal.com/en/training/tutorials?name=revisioning

Anda mungkin juga menyukai