Project :
Process :
Work:
Location:
- Leather gloves
- Goggles
- Safety helmet witrh Chin strap
Conducted By:
Thirupathi
Hazards Present:
- Health hazard
- Physical Body Injury
- Fire Hazard
Personal Protective Equipment Required:
- Safety Shoes
- Safety Mask N95
- Ear Plug
- Safety Harness
Safe Work Procedure:
1)
Electrical Hazard
-
4)
Health Hazard
- To use the ear plug in the noise area.
- To use safety goggles during painting, grinding, drilling, cutting, while using any
electrical machine tools that involves in ducting installation.
- To wear safety mask while painting drilling and doing house keeping.
- Suitable cleanser or clean water should be place near the worker incase of
paint contact.
Page 1 Of 5
6)
Fire Hazard
- Worker is not allowed to smoke while painting is in progress.
- Only train person to allowed to perform the work.
- Flammable materials should never be placed in close proximity to electrical
equipment.
- Do not use faulty electrical tools.
- Always unplug the tool if need to go for break.
Page 2 Of 5
Work:
Location:
Conducted By:
MBFC
Jun Guinto
Hazards Present:
- Physical Body Injury
- Tawer Crane, Mobile Crane, Lorry Crane Collapse
- Leather Gloves
- Goggles
- Hard Hot
2)
3)
Lifting supervisor, rigger man and Kurihara supervisor to ensure the site condition.
Kurihara supervisor to submit "Permit to Hoist"
Qualified lifting supervisor, rigger man, signal man must have a valid certificates
Qualified lifting supervisor to ensure that all valid certificates for crane / lifting
gear with the presence of number tag.
Do not overload the lifting equipment.
No workers to allowed to enter into the swing area of boom crane.
Ensure lifting hooks provided with safety hooks.
Qualified lifting supervisor to brief the rigger man & signal man on the lifting
operation and the safety aspects of the lifting.
Qualified lifting supervisor to ensure the lifting gears are of good conditions and
safe for lifting operation.
All personnel shall put on reflective vest during night time hoisting.
4)
Work:
Location:
MBFC
Jun Guinto
Hazards Present:
- Health hazard
- Physical Body Injury
- Fire Hazard
- Leather gloves
- Goggles
- Hard Hot
Conducted By:
- Safety Mask
Electrical Hazard
-
4)
Health Hazard
- To use the ear plug in the noise area.
- To use safety goggles during painting, grinding, drilling, cutting, while using any
electrical machine tools that involves in ducting installation.
- To wear safety mask while painting drilling and doing house keeping.
- Suitable cleanser or clean water should be place near the worker incase of
paint contact.
6)
Fire Hazard
- Worker is not allowed to smoke while painting is in progress.
- Only train person to allowed to perform the work.
- Flammable materials should never be placed in close proximity to electrical
equipment.
- Do not use faulty electrical tools.
- Always unplug the tool if need to go for break.