FAADE
FRAMING SYSTEMS
PG 14-E
Connection Solutions.
The HALFEN Product range.
HTA
Cast-In Channels
HTA-CS
Curved Solutions
Channels
HTU Cast-In
Channels
DEMU
Fixing anchors
Reinforcement Systems
HBS-05
Screw Connections
MBT
Reinforcement Coupler
HBT
Rebend Connections
HDB
Shear Rails
HIT
Iso-ElemenT
HBB
bi-Trapez-Box
HTT/HTF
Impact Sound Insulation
Elements
HCC
Column Shoe
HSC
Stud Connector
Lifting systems, concrete precast systems, natural stone systems, brickwork support systems, rod systems
DEHA HD-Socket
Lifting Anchor
System
FRIMEDA
TPA Lifting Anchor
System
FPA
Faade
Panel Anchors
Body Anchor
UMA
Grout-In Anchors
SUK
Sub Structure
HK4
Brickwork Support
System
DETAN
Tension Rod System
HALFEN Range
Concrete Products
H A L F E N H TA C A S T - I N C H A N N E L S
Concrete faades
Precast concrete elements
Pipe support systems
Brickwork support
HALFEN HTA Cast-in channels are also
ideal for all fixings in which dynamic
loads occur, e.g. in crane rails or machine
fixings. Special hot-rolled profiles are
available for this purpose.
Easy to adjust
Assembly without noise and dirt
These quality features make HALFEN
Channels an indispensable product for
all planners and users.
H A l F E N H Z A C A S T - I N C H A N N E L S DY N AG R I P
HALFEN HZA Dynagrip are channels that
have the capability to carry loads in the
longitudinal direction. These high capacity
channels are even able to carry dynamic
loads of up to 15 kN.
A unique serration guarantees positive
load transmission in the channel longitudinal direction.
HALFEN HZA Cast-in channels Dynagrip
fulfil all the requirements for securely attaching lift guide rails: Three-dimensional
load absorption with high dynamic loads.
The quality features of HALFEN HZA
Cast-in channels Dynagrip:
High resultant load capacity of up to
FRd = 37,8kN in all directions. This
also includes loads in the longitudinal
direction
Fastening system for cracked and noncracked concrete
Allowable dynamic load amplitude of
up to F = 15kN
H A L F E N H M S B R I C K WO R K R E S T R A I N T S Y S T E M / M L + M L 1 masonry ties
The HALFEN Brickwork restraint
system is designed to tie all brickwork,
wall connections and external cladding
masonry (with or without cavity) by
means of HALFEN ML and ML1 ties to
concrete walls and columns or to steel
and wooden constructions.
Due to the possibility of slipping of
the brick ties within the channels, the
risk of masonry cracking is considerably
reduced. The ties hook securely into
the channels and form a closed
system.
Quality features:
Simple, inexpensive system
Also suitable for thin mortar joints
(ML1 type)
CE labeled
H A L F E N H G B B A LU S T R A D E F I X I N G S Y S T E M
Quality features:
Adjustable fixing of railing posts
Available in lengths from 10cm
upwards
Railing and fixing with new calculation
model approved by the German
building authority (DIBt Berlin),
abZ: Z-21.4-1912
Quality features:
Suitable for applications in safetyrelevant areas
FRd load bearing capacity up to
30.8kN as the resultant load in all
directions
High oscillation range up to 12 kN
fatigue relevant loads
Suitable for applications in earthquake
areas
Special anchor form for safe anchoring
in cracked and non-cracked concrete
H A L F E N H B A N C H O R B O LT S Y S T E M
to carry high loads in situations with
minimal edge distances due to various
anchor depths. Suitable for use in
cracked and non-cracked concrete.
Shear connector HB-V: This classic
fastener combines an economical
solution with easy assembly for simple
connections to non-cracked concrete.
Injection system HB-VMU, injection
mortar HB-VM-ME: suitable for use
in non-cracked concrete.
D E M U F i x ing anchors
DEMU Fixing anchors T-FIXX and bolt
anchors 1988, 1985 from HALFEN
are intended to be used for a safe and
permanent anchorage of fixtures in
concrete. Different anchor dimensions
(max. thread size M42) and materials for
corrosion protection (electroplated, hotdipped galvanised and stainless steel)
ensure a sophisticated product range.
Examples for typical application:
F ixing of props and connecting devices
on precast elements
F ixing of railings for balconies and
bridges
F ixing of utility equipment, power lines
F ixing of steel ladders, stairs and
profiles
F ixing of safety devices
Quality features:
With European Technical Approval,
ETA-13/0222 (T-FIXX), ETA-13/0401
(Bolt anchor)
Design method according to
current state of the art technology
(CEN/TS 1992-4-1/2)
Use in reinforced and unreinforced
concrete
Fixing anchor with internal metric
ISO thread
For transmission of tensile loads,
shear loads and a combination of
both
With attached data chip for identification
Wide range of accessories for easy
assembly
H A L F E N H B J B etojuster
Fixing-tool
Betojuster HBJ-S
Pour hole
Pour hole
Betojuster HBJ-S
H A L F E N H B S - 0 5 S C R E W CO N N E C T I O N
HALFEN HBS-05 Screw connections
offer a wide range of connector bars,
socket bars and accessories for optimal
solutions regarding both in-situ and
precast constructions.
All HBS-05 bar versions can be combined
with each other, so that a high degree
of flexibility and a greater range of
applications is achieved. The HBS-05
position sleeve enables the connection
between axially unmovable and not
turnable bars, e.g. at crane openings in
floor slabs. For connections with short
anchoring lengths, HBS-05 end anchors
are available.
Quality features:
Extensive delivery programme for
straight and bent bars with diameters
ranging from 12 to 32mm
Colour coding for easy identification
of matching components
H A L F E n M B T R einforcement Coupler
The MBT Reinforcement coupler joins
two reinforcement bars. Tensile and
compression forces are transferred.
The MBT Reinforcement coupler is
particularly suitable for the replacement
of damaged reinforcement, the connection of old and new constructions, the
connection of precast concrete units
and of high precast chimneys.
Quality features:
Safe and quick connection
Short couplings
No preparation of bar ends, no cutting
threads or welding
Approved by the German building
authority (DIBt Berlin), abZ: Z-1.5-10
H A L F E N H L B LO O P B OX
HALFEN HLB Loop Box the strong
simple and economic solution for
connecting concrete elements to one
another.
Economic construction with short
assembly times, smooth processes
during construction and security after
construction these are our concerns.
The HALFEN HLB Loop Box ensures that
walls can be erected quickly and easily
when building with pre-fabricated concrete wall elements. And all that with the
highest level of reliability and quality.
Quality characteristics:
No deformation thanks to use of
sturdy sheet steel
Simply assembly due to pre-punched
nail holes
Special recess formers save time
during assembly
Approved by the German building
authority (DIBt Berlin), abZ: Z-21.8-1869,
abZ: Z-21.8-1870, abZ: Z-21.8-1871
H A L F E N H B T R E B E N D CO N N E C T I O N
It can be simply nailed to the formwork
or wired to the reinforcement.
HBT Rebend connections correspond
with the requirements in the rebend fact
sheet, DBV version 2008, are typetested and suitable for use according
to DIN EN-1992-1-1.
10
Quality features:
The reinforcement starter bars
are made of
a) B500B in accordance with
DIN 488
b) B500 NR available on request,
bars 812mm
7 different casings to suit wall
thickness from 823cm.
(Special types are available
for larger wall thickness)
13 different bar shapes are available
for single or double bars
Type tested by the German testing
authority according to DIN EN 1992-1-1,
Test no.: S-WUE/110115
HDB Shear rail elements with doubleheaded studs, welded to a spacer bar, are
used as punching and shear reinforcement.
They are preferably put in from the top
after laying the flexural reinforcement. The
double-headed studs are made out of ribbed or smooth rebars. HDB Shear rails are
supplied as HDB System elements, which
are available off stock, and HDB Complete
elements, which are manufactured on
demand according to customers requirements. The HDB System elements consist
of 2 stud and 3 stud elements, which
can be combined to any required layout.
The symmetrical arrangement of the
studs on each HDB System element and
the patented clip bar ensures correct installation. The HDB Complete elements
are designed with 3 and more doubleheaded studs welded to a spacer bar at
individual spacings on demand. HDB
Complete elements are very suitable
for installation from below; i.e. the
elements are placed on the formwork
by special spacers. The lower and upper
reinforcement are then installed.
Benefits of the HDB Shear rails:
The new European Technical Approval
ETA 12/0454 allows for a punching
shear design based on EN 1992-1-1
The same design provisions are now
applicable in 28 countries
In addition, for the application as
punching shear reinforcement, German Technical Approvals issued by
the German Building Authority (DIBt)
are available: Z-15.1-213, Z-15.1-264
For the application as shear reinforcement, German Technical Approvals issued by the German Building Authority (DIBt) are available, which base on
EN 1992 1 1: Z-15.1-270, Z-15.1-249
The HALFEN Calculation program is a
convenient tool with many features to
help calculate HDB Shear rails as punching shear or shear reinforcement
The HDB Shear rails are CE marked
and quality certified by the RAL
control association for anchorage
and reinforcement technology:
RAL-GZ 658/2
11
H A L F E N S O U N D I N S U L AT I O N P R O D U C T S
Sound insulation products are perfectly
suited to fulfil the requirements of sound
impact insulation.
Using the high quality Elastomeric supports and with correct placement of the
HALFEN HTPL Joint strips, the solid stair
units are acoustically separated from the
adjacent building components. HALFEN
12
H A L F E N H C C CO LU M N S H O E
Conventional methods for the connection of columns to foundations are often
expensive to produce, to transport and
to handle on construction site. The
HALFEN HCC Column shoes in conjunction with HALFEN HAB Anchor bolts
is an advantageous solution for these
problems.
H A L F E N H S D S H E A R D OW E L S Y S T E M
The HALFEN Shear dowel system HSD is
designed to transmit shear loads in
construction joints and therefore avoid irregular settling and misalignment caused
by variable deformation. Depending on
the type chosen, horizontal movement
caused by contraction, creeping or the
effect of temperature is allowed in the
longitudinal direction or longitudinal- and
lateral directions.
Particularly high loads can be transmitted
by the HSD/CRET shear dowel system.
Quality features:
Simple geometry of the joint
Time-saving due to simple shuttering
and installation
Space gained by exclusion of
double pin
Cost saving and space gained due
to construction in sections
Approved by the German building
authority (DIBt Berlin), abZ: Z-15.7-253
13
H A L F E N H S C S tud Connector
flexibility when constructing concrete
columns with corbels.
Quality features:
Transfer high tensile forces
100% anchoring due to forged head
Speedier construction due to simple
assembly without special tools;
the amount of steel used is reduced
considerably
Anchor head can be placed
horizontally or vertically to allow the
optimal use of space
Also suitable for not just static loads
Walls and columns can be concreted
in one step, the corbels are
subsequently attached by threaded
connectors
Reliable and time-saving
Simple arrangement of reinforcement
Solutions for monolithic and
subsequently concreted consoles
Low cost
Complete system for all applications
HSC-S
HSC-A
H A L F E N H U C U ni v ersal Connection
The HALFEN HUC Universal Connection
System is a family of components that
together provides very effective solutions
for the transfer of high structural loads
into concrete. The components of the
HUC family comprise of the HSC-B Concrete Steel Connection System and the
HSCC Steel Corbel System. The load range
and adaptability of these components
enables the HUC system to offer a huge
range of connection applications. These
include connections for steel beams,
steel corbels, and anchor points for both
DETAN Tension Rods and cable bracing
systems.
HSC-B Steel connection system
The steel connection system can be
used everywhere, where a connection
between steel and concrete is needed.
By fitting on non-predominantly static
loads, the socket rods are also suitable
for crane rail systems.
14
H A L F E N H I T I nsulated Connection
Slab connection elements are heat-insulating elements used for thermal separation
of reinforced concrete structures. In
practice slab connections are used to
avoid mould caused by condensation,
to ensure compliance with increased
building physic requirements and also
to avoid cracks caused by thermal
expansions.
The HALFEN insulated connection HIT-HP/
HIT-SP with patented Compression Shear
Bearings is the first slab connection with
a CE mark.
Because of the ETA-13/0546 Approval
the insulated connections, the calculation
concept as well as the characteristic values
from the building design aspect can be
used in more than 30 countries in Europe
without further approval requirements.
This increases reliability in planning.
Apart from the calculation model and
other construction references, the thermal bridge characteristic values (, min
and fRsi) as well as the difference value
(Ln,W) for footfall noise for a slab connection element are, for the first time,
certified Europe-wide. HALFEN places a
building authority approved reference
with building physic values at the disposal of the user, the basis of which are generally easy to understand with technically regulated details. The patented multipart installation and flexible combination
of the modules means that transportation and storage costs as well as CO2emmisions can be significantly reduced.
The method of combining the elements
15
HALFEN Range
Faade Products
16
HALFEN SUK
The HALFEN SUK System is an adjustable
suspended channel system with support
and restraint anchors that are continuously
variable in height, for cavities > 160mm.
It is ideal for new builds and refurbishments. It is particularly suited for natural
stone faades with large and varying
distances to the load bearing wall. The
system is easy to install with few simple
components.
Quality features:
Stainless steel A4
Easy and quick installation
Spans non-load bearing substrate
High load carrying capacity
Adjustable fastening to HALFEN
Channels for maximum adjustment
High corrosion resistance
17
H A L F E N H C W C U R TA I N WA L L S Y S T E M
The HALFEN Curtain wall support
system provides adjustable support
for framed faade systems. Adjustable
brackets used in conjunction with
HALFEN Channels provide a fast and
simple method of restraining both the
weight and wind loads imposed on the
faade. The system may be used on either
steel frame or conventional concrete
frame structures, and is available in
different designs to enable rapid mullion
installations to either the top or edge of
floors and beams.
Quality features:
Fast and safe fixing, allowing
immediate full load application
Installed without special tools
No power supply required for
installation
Easy adjustment in up to three
directions
High load bearing capacities
Close edge distances
H A L F E N B A / H R M / DT / D H B O DY anchors
3-dimensional adjustable HALFEN Body anchors are used for connecting natural stone
faades to load bearing structures made of
concrete or brickwork. They are fixed using
HALFEN Anchor bolt systems. HRM/HRC,
BA or DT are support anchors for dead
loads and wind loads, DH Restraint anchors are used to support horizontal compression or tension forces (wind). The adjustment is partly possible under load.
HALFEN HRM Body anchors are used for
maximum permissible loads up to 500 N
and projections between 40 and 130 mm.
HALFEN BA Body anchors are designed
for small projections of 60 to 120 mm
with a maximum load of 1300 N.
HALFEN DT Body anchors are suitable for
large projections of 140 to 300 mm and
high loads up to 1300 N. The pre-assembled anchor consisting of the bracket, the
adjustable wedge plate and a clamping
bolt is supplied ready to be installed.
HALFEN DH Body anchors are used in
horizontal or vertical joints in combination
18
H A L F E N H K 4 B R I C K WO R K S U P P O R T
The HALFEN HK4 Brickwork support
system is used for absorbing the dead
load of brickwork and its transfer to the
structure walls of the building.
With their high degree of vertical adjustment of 3,5cm they are very well suitable to balance existing tolerances in the
structure or inaccuracy in the installation
of dowels.
The HK4 Brickwork support system is
available in stainless steel in various
versions to cope with a wide range of
support applications.
The different load capacities of 3.5kN,
7.0kN and 10.5kN in connection with
HALFEN Channels are an economic
way of supporting brickwork.
Quality features:
Complete product range for brickwork
construction
Very good adjustment options
Type-test report S-WUE 080272
Approved by the German building
authority (DIBt Berlin), abZ: Z-21.8-1992
for the notched U-Bracket
CE marked
Free design software
H A L F E N B R A PA R A P E T CO R B E L S
Parapet corbels are used to fix precast
parapet or attic panels to reinforced
concrete slabs, balconies or wide
columns.
They are cast into the precast parapets
and transported to site. Their load behavior is characterized by the absorption
of bending moments. When fixing them
to cast-in HALFEN Channels, the anchors
can be moved horizontally, and they can
be adjusted vertically using spacers.
Quality features:
Reduced thermal bridging
Designed in stainless steel for
high corrosion protection
Very fast installation
Type-test report S-WUE 050196
19
H A L F E N S P - S PA W I R E S A N DW I C H PA N E L A N C H O R
HALFEN Wire sandwich panel anchors are
used to join the load bearing and the
front panel in a multilayer concrete faade slab. They transfer the dead weight of
the front panel as well as the stresses on
it to the load bearing panel. As the anchors are exposed to corrosion in the
area of the air gap and the insulating layer, they are made of stainless steel. In
addition to load bearing anchors, ties or
pins are used to prevent deformation of
the front panel and for wind loads.
Quality features:
Easy and quick installation
Well proven system, approved by
the German building authority
(DIBt Berlin), abZ: Z-21.8-1926
Can also be used for very thick
insulating layers between the
concrete skins
Measurement software ready for
testing
Low heat transfer
halfen S p - M VA S L E E V E A N C H O R S
halfen S P - FA F L AT A N C H O R S
20
H A L F E N F PA Fa ade PA N E L A N C H O R S
The faade anchor system consists of
an upper section with a vertically
adjustable threaded rod and a lower
section cast into the panel allowing
horizontal adjustment. All system
components are made of stainless steel.
Additional accessories of this product
range include spacer bolts, wind anchors
made of plastic or stainless steel, turnbuckle restraint, HKZ Restraint ties and
adjustable restraints.
Quality features:
Simple and quick installation
Adjustable in all directions
Approved by the German building
authority (DIBt Berlin),
abZ: Z-21.8-1910
Load levels from 5 to 56 kN/anchor
D E TA N R O D S Y S T E M
System solutions help to realize complex
constructions and interesting designs for
internal and external areas. All components are available in steel and stainless
steel.
Quality features:
Fulfils sophisticated design requirements
Simple visual check of installation
Pre-assembled delivery up to 60 mm
Hydraulic pre-tension device available
Cross coupler as economic alternative
to the circular disc
European technical approvals
ETA-05/0207 and ETA-11/0311
Type-test reports S-WUE 060382 and
S-WUE 120315 acc. to EC 3
CE marked
Free design software
tension rod
locking nut
circlip
pin
anchor disk
fork end
21
Quality features:
Concise product range for load groups
from 1,3 up to 25,0
Integrated sleeve protection (patent)
with data clip
Robust lifting clutch for increased
safety and economy
The lifting hook can also be ordered
with a certificate
CE marked in accordance with the EU
machinery directive guide lines since
April 2012
22
F R I M E DA T PA L I F T I N g A N C H O R S Y S T E M
23
HALFEN Range
Framing Products
24
24
2014 HALFEN PG 14-E www.halfen.com
For all systems HALFEN Framing channels are offered in unslotted or slotted
versions. Materials available are mill
finish, pre-galvanized, hot-dip galvanized
and stainless steel.
25
H A L F E N F R A M I N G S Y S T E M S AC C E S S O R I E S
Advantages are:
High load capacity
Easy and quick to install
Compatible with system 41 brackets
and with the HALFEN POWERCLICK
System
26
H A L F E N P OW E R C L I C K F R A M I N G S Y S T E M
27
C ontact H A LF E N WO RLDWIDE
HALFEN is represented by subsidiaries in the following 14 countries, please contact us:
Austria
Phone: +43-1-2596770
E-Mail: office@halfen.at
Internet: www.halfen.at
Fax: +43-1-259-677099
Belgium/Luxembourg
HALFEN N.V.
Borkelstraat 131
2900 Schoten
Phone: +32-3-6580720
E-Mail: info@halfen.be
Internet: www.halfen.be
Fax:
+32-3-6581533
China
Phone: +86-1059073200
E-Mail: info@halfen.cn
Internet: www.halfen.cn
Fax:
+86-1059073218
Czech Republic
HALFEN s.r.o.
Business Center afrnkova
afrnkova 1238/1
155 00 Praha 5
Fax: +420-235-314308
France
HALFEN S.A.S.
18, rue Goubet
75019 Paris
Fax:
Germany
Phone: +49-2173-970-0
E-Mail: info@halfen.de
Internet: www.halfen.de
Fax: +49-2173-970225
Italy
Phone: +39-035-0760711
E-Mail: info@halfen.it
Internet: www.halfen.it
Fax: +39-035-0760799
Netherlands
HALFEN b.v.
Oostermaat 3
7623 CS Borne
Fax:
+31-74-267 2659
Norway
HALFEN AS
Postboks 2080
4095 Stavanger
Phone: +47-51823400
E-Mail: post@halfen.no
Internet: www.halfen.no
Fax:
+47-51823401
Poland
Phone: +48-61-6221414
E-Mail: info@halfen.pl
Internet: www.halfen.pl
Fax:
+48-61-6221415
Sweden
Halfen AB
Vdursgatan 5
412 50 Gteborg
Phone: +46-31-985800
E-Mail: info@halfen.se
Internet: www.halfen.se
Fax:
+46-31-985801
Switzerland
HALFEN Swiss AG
Hertistrasse 25
8304 Wallisellen
Phone: +41-44-8497878
E-Mail: mail@halfen.ch
Internet: www.halfen.ch
Fax:
+41-44-8497879
United Kingdom/
Ireland
HALFEN Ltd.
A1/A2 Portland Close
Houghton Regis LU5 5AW
Fax: +44-1582-470304
Phone: +1800.423.9140
E-Mail: info@halfenusa.com
Internet: www.halfenusa.com
Fax:+1 877.683.4910
Phone: +49-2173-970-0
E-Mail: info@halfen.com
Internet: www.halfen.com
Fax:+49-2173-970-849
Furthermore HALFEN is represented with sales offices and distributors worldwide. Please contact us: www.halfen.com
+33-1-44523152