Total Marks - 20
Note : In case of fill in the blank questions with two (or more) answers, please enter the answers separated with
a "single space". Please enter your answers carefully and practice caution or else your answers may not be
evaluated correctly.
Characteristic gel porosity is 25%
28%
31%
0%
1 point
The compound of cement that mostly contributes to very early strength is C3A
C4AF
C2S
C3S
1 point
The volume occupied by solid product of hydration of 'C' gm of cement 'h' degree of hydration is 0.49Ch
0.65Ch
Ch
0.36Ch
1 point
The approximate average amount of CO2 liberated for production of one kg of clinker is 100 gm
300 gm
1000 gm
5000 gm
1 point
The maximum degree of hydration possible for water to cement ratio 0.25 is _________ .
2 points
The capillary porosity for water to cement ratio 0.5, at 50% degree of hydration is
_____________ .
2 points
Among Bogue's compounds, typical low heat cement should have lowest amount of _______
Hint
2 points
Hint
(Arrange in
2 points
The main raw materials used in the production of cement are _______ and _______ .
2 points
The process of transition of plastic mixture of cement and water to a solid state is called Hardening
Compaction
Hydration
Setting
1 point
On complete hydration, 100 gm of typical OPC cement reacts with ______ gm of water
1 point
Ratio of actual lime content to maximum lime content that can be allowed without producing
free lime is called __________ factor.
1 point