06
Date
2011-09-30
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Website:
http://www.huawei.com
Email:
support@huawei.com
Issue 06 (2011-09-30)
eNodeB
Performance Counter Reference
Purpose
This document describes all the performance counters of the eNodeB.
Product Version
The corresponding software version is V100R003C00.
The following table lists the product version involved in this document.
Product Name
Product Version
DBS3900 LTE
V100R003C00
BTS3900 LTE
V100R003C00
BTS3900A LTE
V100R003C00
V100R003C00
BTS3900L LTE
V100R003C00
Intended Audience
This document is intended for:
l
Network planners
System engineers
Change History
For detailed performance counter changes, see Appendix 4 of the release notes.
Issue 06 (2011-09-30)
ii
eNodeB
Performance Counter Reference
Document Structure
Figure 1-1 shows the document structure.
Figure 1 Document structure
Explanation
Classification of
measurement object type
Measurement unit
Measurement counter
Issue 06 (2011-09-30)
iii
eNodeB
Performance Counter Reference
Contents
Contents
About This Document.....................................................................................................................ii
1 Radio Network Related Measurement......................................................................................1
1.1 Measurement of Cell performance.....................................................................................................................2
1.1.1 RRC Connection Setup Measurement (Cell) (RRC.Setup.Cell)...............................................................3
1.1.1.1 Number of RRC Connection Setup Requests in a Cell....................................................................6
1.1.1.2 Number of RRC Connection Setup Attempts in a Cell....................................................................8
1.1.1.3 Number of Successful RRC Connection Setups in a Cell..............................................................10
1.1.2 RRC Connection Setup Failure Measurement (Cell) (RRC.SetupFail.Cell)...........................................13
1.1.2.1 Number of RRC Connection Setup Failures for Different Causes in a Cell..................................14
1.1.3 RRC Connection Reestablishment Measurement (Cell) (RRC.ReEst.Cell)...........................................17
1.1.3.1 Number of RRC Connection Reestablishment Requests in a Cell.................................................18
1.1.3.2 Number of Successful RRC Connection Reestablishments in a Cell.............................................20
1.1.4 RRC Connection Reestablishment Failure Measurement (Cell) (RRC.ReEstFail.Cell).........................22
1.1.4.1 Number of RRC Connection Reestablishment Failures for Different Causes in a Cell.................23
1.1.5 E-RAB Setup Measurement (Cell) (E-RAB.Est.Cell).............................................................................26
1.1.5.1 Number of E-RAB Setup Attempts in a Cell.................................................................................32
1.1.5.2 Number of Successful E-RAB Setups in a Cell.............................................................................35
1.1.5.3 Total Number of Initial E-RAB Setup Attempts in a Cell.............................................................38
1.1.5.4 Number of Initial E-RAB Setup Attempts in a Cell.......................................................................40
1.1.5.5 Total Number of Successful Initial E-RAB Setups in a Cell.........................................................42
1.1.5.6 Number of Successful Initial E-RAB Setups in a Cell...................................................................44
1.1.5.7 Total Number of Successful E-RAB Setups in a Cell....................................................................46
1.1.5.8 Total Number of E-RAB Setup Attempts in a Cell........................................................................49
1.1.5.9 Total Number of E-RAB Setup Attempts for Incoming Handovers in a Cell................................51
1.1.5.10 Total Number of Successful E-RAB Setups for Incoming Handovers in a Cell..........................53
1.1.5.11 Number of UE-Specific Signaling Connection Setups on the S1 Interface.................................56
1.1.6 E-RAB Release Measurement (Cell) (E-RAB.Rel.Cell).........................................................................57
1.1.6.1 Number of Abnormal E-RAB Releases for Different Causes in a Cell.........................................63
1.1.6.2 Number of Abnormal E-RAB Releases in a Cell...........................................................................68
1.1.6.3 Number of Normal E-RAB Releases in a Cell...............................................................................71
1.1.6.4 Number of Normal E-RAB Releases for Outgoing Handovers in a Cell.......................................74
1.1.6.5 Number of Abnormal E-RAB Releases for Outgoing Handovers in a Cell...................................79
1.1.6.6 Total Number of Abnormal E-RAB Releases in a Cell..................................................................84
Issue 06 (2011-09-30)
iv
eNodeB
Performance Counter Reference
Contents
eNodeB
Performance Counter Reference
Contents
vi
eNodeB
Performance Counter Reference
Contents
vii
eNodeB
Performance Counter Reference
Contents
viii
eNodeB
Performance Counter Reference
Contents
ix
eNodeB
Performance Counter Reference
Contents
eNodeB
Performance Counter Reference
Contents
xi
eNodeB
Performance Counter Reference
Contents
Issue 06 (2011-09-30)
xii
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Measurement Unit
Description
Measurement related to RA
eNodeB
Performance Counter Reference
Measurement Unit
Description
eNodeB
Performance Counter Reference
number of successful RRC connection setups in a cell. The setup success rate of the RRC
connection can be calculated on the basis of the reported counters. Figure 1-1 shows the
measurement points of RRC connection setup.
Figure 1-1
Counter
The following table describes the counters contained in the "RRC Connection Setup
Measurement (Cell) (RRC.Setup.Cell)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526726
657
L.RRC.ConnReq.
Msg
Earlier than
V100R003C00
1526726
658
L.RRC.ConnReq.A
tt
Earlier than
V100R003C00
1526728
217
L.RRC.ConnReq.A
tt.Emc
V100R003C00
1526728
218
L.RRC.ConnReq.A
tt.HighPri
V100R003C00
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526728
219
L.RRC.ConnReq.A
tt.Mt
V100R003C00
1526728
220
L.RRC.ConnReq.A
tt.MoSig
V100R003C00
1526728
221
L.RRC.ConnReq.A
tt.MoData
V100R003C00
1526728
216
L.RRC.ConnSetup
V100R003C00
1526726
659
L.RRC.ConnReq.S
ucc
Earlier than
V100R003C00
1526728
222
L.RRC.ConnReq.S
ucc.Emc
V100R003C00
1526728
223
L.RRC.ConnReq.S
ucc.HighPri
V100R003C00
1526728
224
L.RRC.ConnReq.S
ucc.Mt
V100R003C00
1526728
225
L.RRC.ConnReq.S
ucc.MoSig
V100R003C00
1526728
226
L.RRC.ConnReq.S
ucc.MoData
V100R003C00
eNodeB
Performance Counter Reference
Counter Name
Description
1526726657
L.RRC.ConnReq.Msg
1526726658
L.RRC.ConnReq.Att
1526728217
L.RRC.ConnReq.Att.Emc
1526728218
L.RRC.ConnReq.Att.HighPri
1526728219
L.RRC.ConnReq.Att.Mt
1526728220
L.RRC.ConnReq.Att.MoSig
1526728221
L.RRC.ConnReq.Att.MoData
Description
The counters measure the number of RRC connection setup requests for different causes in a
cell. The RRC Connection Request message is the first RRC signaling message sent from the
UE to the eNodeB. The message is used to request the setup of an RRC connection.
Measurement Point
As shown in point A in Figure 1-2, the corresponding counter is incremented each time the
eNodeB receives an RRC Connection Request message from the UE. The counters are measured
as follows:
The L.RRC.ConnReq.Msg is incremented by 1 each time the eNodeB receives the RRC
Connection Request message.
The L.RRC.ConnReq.Att is incremented by 1 only when the eNodeB receives the RRC
Connection Request message for the first time.
Issue 06 (2011-09-30)
eNodeB
Performance Counter Reference
The L.RRC.ConnReq.Att.Emc counter is incremented by 1 only when the eNodeB receives the
RRC Connection Request message for the first time and the Establishment Cause information
element of the message is emergency.
The L.RRC.ConnReq.Att.HighPri counter is incremented by 1 only when the eNodeB receives
the RRC Connection Request message for the first time and the Establishment Cause information
element of the message is highPriorityAccess.
The L.RRC.ConnReq.Att.Mt counter is incremented by 1 only when the eNodeB receives the
RRC Connection Request message for the first time and the Establishment Cause information
element of the message is mt-Access.
The L.RRC.ConnReq.Att.MoSig counter is incremented by 1 only when the eNodeB receives
the RRC Connection Request message for the first time and the Establishment Cause information
element of the message is mo-Signalling.
The L.RRC.ConnReq.Att.MoData counter is incremented by 1 only when the eNodeB receives
the RRC Connection Request message for the first time and the Establishment Cause information
element of the message is mo-Data.
Figure 1-2
Issue 06 (2011-09-30)
eNodeB
Performance Counter Reference
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.RRC.ConnReq.Msg
LBFD-002007
TDLBFD-002007
LBFD-002007
TDLBFD-002007
L.RRC.ConnReq.Att.Em
c
LBFD-002007
TDLBFD-002007
L.RRC.ConnReq.Att.Hig
hPri
LBFD-002007
TDLBFD-002007
L.RRC.ConnReq.Att.Mt
LBFD-002007
TDLBFD-002007
L.RRC.ConnReq.Att.Mo
Sig
LBFD-002007
TDLBFD-002007
L.RRC.ConnReq.Att.Mo
Data
LBFD-002007
TDLBFD-002007
L.RRC.ConnReq.Att
Counter Name
Description
1526728216
L.RRC.ConnSetup
Description
The counter measures the number of RRC connection setup attempts in a cell. That is, the counter
measures the number of times that the eNodeB sends an RRC Connection Setup message to the
UE after receiving an RRC Connection Request message from the UE. The RRC Connection
Issue 06 (2011-09-30)
eNodeB
Performance Counter Reference
Setup message is an RRC signaling message sent from the eNodeB to the UE. The message is
used to inform the UE of the related configuration information and the result of the RRC
connection setup.
Measurement Point
As shown in point B in Figure 1-3, the corresponding counter is incremented by 1 each time
the eNodeB sends an RRC Connection Setup message to the UE after receiving an RRC
Connection Request message from the UE. The counter is measured as follows:
The L.RRC.ConnSetup counter is incremented by 1 each time the eNodeB sends the message
to the UE.
Figure 1-3
Formula
None
Issue 06 (2011-09-30)
eNodeB
Performance Counter Reference
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.RRC.ConnSetup
LBFD-002007
TDLBFD-002007
Counter Name
Description
1526726659
L.RRC.ConnReq.Succ
1526728222
L.RRC.ConnReq.Succ.Emc
1526728223
L.RRC.ConnReq.Succ.High
Pri
1526728224
L.RRC.ConnReq.Succ.Mt
1526728225
L.RRC.ConnReq.Succ.MoSig
1526728226
L.RRC.ConnReq.Succ.MoD
ata
Description
The counters measure the number of successful RRC connection setups for different causes in
a cell. That is, the counters measure the number of RRC Connection Setup Complete messages
received by the eNodeB from the UE. The RRC Connection Setup Complete message is an RRC
signaling message sent from the UE to the eNodeB. The message is used to inform the eNodeB
that the RRC connection setup is completed and informs the eNodeB of the carried NAS
signaling information and the information about PLMN selection.
Issue 06 (2011-09-30)
10
eNodeB
Performance Counter Reference
Measurement Point
As shown in point C in Figure 1-4, the corresponding counter is incremented each time the
eNodeB receives an RRC Connection Setup Complete message from the UE. The counters are
measured as follows:
The L.RRC.ConnReq.Succ counter is incremented by 1 each time the eNodeB receives the
message from the UE.
The L.RRC.ConnReq.Succ.Emc counter is incremented by 1 each time the eNodeB receives the
message from the UE and the Establishment Cause information element of the RRC Connection
Request message is emergency call.
The L.RRC.ConnReq.Succ.HighPri counter is incremented by 1 each time the eNodeB receives
the message from the UE and the Establishment Cause information element of the RRC
Connection Request message is highPriorityAccess.
The L.RRC.ConnReq.Succ.Mt counter is incremented by 1 each time the eNodeB receives the
message from the UE and the Establishment Cause information element of the RRC Connection
Request message is mt-Access.
The L.RRC.ConnReq.Succ.MoSig counter is incremented by 1 each time the eNodeB receives
the message from the UE and the Establishment Cause information element of the RRC
Connection Request message is mo-Signalling.
The L.RRC.ConnReq.Succ.MoData counter is incremented by 1 each time the eNodeB receives
the message from the UE and the Establishment Cause information element of the RRC
Connection Request message is mo-Data.
Issue 06 (2011-09-30)
11
eNodeB
Performance Counter Reference
Figure 1-4
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.RRC.ConnReq.Succ
LBFD-002007
TDLBFD-002007
12
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.RRC.ConnReq.Succ.E
mc
LBFD-002007
TDLBFD-002007
L.RRC.ConnReq.Succ.H
ighPri
LBFD-002007
TDLBFD-002007
L.RRC.ConnReq.Succ.M
t
LBFD-002007
TDLBFD-002007
L.RRC.ConnReq.Succ.M
oSig
LBFD-002007
TDLBFD-002007
L.RRC.ConnReq.Succ.M
oData
LBFD-002007
TDLBFD-002007
Issue 06 (2011-09-30)
13
eNodeB
Performance Counter Reference
Counter
The following table describes the counters contained in the "RRC Connection Setup Failure
Measurement (Cell) (RRC.SetupFail.Cell)" measurement unit:
Counte
r ID
Counter Name
Description
Original Release
1526727
083
L.RRC.SetupFail.R
esFail
Earlier than
V100R003C00
1526727
084
L.RRC.SetupFail.N
oReply
Earlier than
V100R003C00
1526728
269
L.RRC.SetupFail.R
ej
V100R003C00
1.1.2.1 Number of RRC Connection Setup Failures for Different Causes in a Cell
Counter
Counter ID
Counter Name
Description
1526727083
L.RRC.SetupFail.ResFail
1526727084
L.RRC.SetupFail.NoReply
1526728269
L.RRC.SetupFail.Rej
Description
The counters measure the number of RRC connection setup failures due to different causes in a
cell and the total number of RRC connection setup failures in the cell. The RRC Connection
Reject message is an RRC signaling message sent from the eNodeB to the UE. The message is
used to inform the UE that the access is rejected by the eNodeB.
Measurement Point
As shown in point A in Figure 1-6, the L.RRC.SetupFail.ResFail counter is incremented by 1
each time the eNodeB sends an RRC Connection Reject message to the UE due to resource
allocation failure after receiving an RRC Connection Request message from the UE.
As shown in point A in Figure 1-7, the L.RRC.SetupFail.NoReply counter is incremented by 1
each time the eNodeB does not receive an RRC Connection Setup Complete message from the
Issue 06 (2011-09-30)
14
eNodeB
Performance Counter Reference
UE within the specified time. Before that, the eNodeB has sent an RRC Connection Setup
message to the UE after receiving an RRC Connection Request message from the UE.
As shown in point A in Figure 1-6, the L.RRC.SetupFail.Rej counter is incremented by 1 each
time the eNodeB sends an RRC Connection Reject message to the UE after receiving an RRC
Connection Request message from the UE.
Figure 1-6
Issue 06 (2011-09-30)
15
eNodeB
Performance Counter Reference
Figure 1-7
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.RRC.SetupFail.ResFail
LBFD-002007
TDLBFD-002007
16
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.RRC.SetupFail.NoReply
LBFD-002007
TDLBFD-002007
L.RRC.SetupFail.Rej
LBFD-002007
TDLBFD-002007
Counter
The following table describes the counters contained in the "RRC Connection Reestablishment
Measurement (Cell) (RRC.ReEst.Cell)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
085
L.RRC.ReEst.Att
Earlier than
V100R003C00
1526727
087
L.RRC.ReEst.Reco
nfFail.Att
Earlier than
V100R003C00
1526727
090
L.RRC.ReEst.HoF
ail.Att
Earlier than
V100R003C00
1526727
086
L.RRC.ReEst.Succ
Earlier than
V100R003C00
1526727
088
L.RRC.ReEst.Reco
nfFail.Succ
Earlier than
V100R003C00
1526727
091
L.RRC.ReEst.HoF
ail.Succ
Earlier than
V100R003C00
17
eNodeB
Performance Counter Reference
Counter Name
Description
1526727085
L.RRC.ReEst.Att
1526727087
L.RRC.ReEst.ReconfFail.At
t
1526727090
L.RRC.ReEst.HoFail.Att
Description
The counters measure the number of RRC connection reestablishment requests for different
causes in a cell. The RRC Connection Reestablishment Request message is an RRC signaling
message sent by the UE. The message is used to recover the RRC signaling connection.
Measurement Point
As shown in point A in Figure 1-8, the corresponding counter is incremented each time the
eNodeB receives an RRC Connection Reestablishment Request message from the UE. The
counters are measured as follows:
The L.RRC.ReEst.Att counter is incremented by 1 only when the eNodeB receives the message
for the first time.
The L.RRC.ReEst.ReconfFail.Att counter is incremented by 1 each time the eNodeB receives
the message from the UE and the ReestablishmentCause information element of the message is
reconfigurationFailure.
The L.RRC.ReEst.HoFail.Att counter is incremented by 1 each time the eNodeB receives the
message from the UE and the ReestablishmentCause information element of the message is
handoverFailure.
Issue 06 (2011-09-30)
18
eNodeB
Performance Counter Reference
Figure 1-8
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.RRC.ReEst.Att
LBFD-002007
TDLBFD-002007
19
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.RRC.ReEst.ReconfFail
.Att
LBFD-002007
TDLBFD-002007
L.RRC.ReEst.HoFail.Att
LBFD-002007
TDLBFD-002007
Counter Name
Description
1526727086
L.RRC.ReEst.Succ
1526727088
L.RRC.ReEst.ReconfFail.Su
cc
1526727091
L.RRC.ReEst.HoFail.Succ
Description
The counters measure the number of successful RRC connection reestablishments for different
causes in a cell. The RRC Connection Reestablishment Complete message is an RRC signaling
message sent from the UE to the eNodeB. The message is used to inform the eNodeB that the
RRC connection reestablishment is completed.
Measurement Point
As shown in point B in Figure 1-9, the corresponding counter is incremented each time the
eNodeB receives an RRC Connection Reestablishment Complete message from the UE. The
counters are measured as follows:
The L.RRC.ReEst.Succ counter is incremented by 1 each time the eNodeB receives the message
from the UE.
The L.RRC.ReEst.ReconfFail.Succ counter is incremented by 1 each time the eNodeB receives
an RRC Connection Reestablishment Request message from the UE and the Reestablishment
Cause information element of the message is reconfigurationFailure.
The L.RRC.ReEst.HoFail.Succ counter is incremented by 1 each time the eNodeB receives an
RRC Connection Reestablishment Request message from the UE and the Reestablishment Cause
information element of the message is handoverFailure.
Issue 06 (2011-09-30)
20
eNodeB
Performance Counter Reference
Figure 1-9
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.RRC.ReEst.Succ
LBFD-002007
TDLBFD-002007
21
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.RRC.ReEst.ReconfFail
.Succ
LBFD-002007
TDLBFD-002007
L.RRC.ReEst.HoFail.Suc
c
LBFD-002007
TDLBFD-002007
Counter
The following table describes the counters contained in the "RRC Connection Reestablishment
Failure Measurement (Cell) (RRC.ReEstFail.Cell)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
089
L.RRC.ReEst.Reco
nfFail.Rej
Earlier than
V100R003C00
1526727
092
L.RRC.ReEst.HoF
ail.Rej
Earlier than
V100R003C00
1526727
093
L.RRC.ReEstFail.
ResFail
V100R003C00
1526727
094
L.RRC.ReEstFail.
NoReply
V100R003C00
1526728
270
L.RRC.ReEstFail.
Rej
V100R003C00
1526728
271
L.RRC.ReEstFail.
NoCntx
V100R003C00
22
eNodeB
Performance Counter Reference
Counter Name
Description
1526727089
L.RRC.ReEst.ReconfFail.Re
j
1526727092
L.RRC.ReEst.HoFail.Rej
1526727093
L.RRC.ReEstFail.ResFail
1526727094
L.RRC.ReEstFail.NoReply
1526728270
L.RRC.ReEstFail.Rej
1526728271
L.RRC.ReEstFail.NoCntx
Description
The counters measure the number of RRC connection reestablishment failures due to different
causes in a cell. The RRC Connection Reestablishment Reject message is an RRC signaling
message sent from the eNodeB to the UE. The message is used to inform the UE that the
reestablishment is rejected by the eNodeB.
Measurement Point
As shown in point A in Figure 1-10, the corresponding counter is incremented each time the
eNodeB sends an RRC Connection Reestablishment Reject message after receiving an RRC
Connection Reestablishment Request message from the UE. The counters are measured as
follows:
The L.RRC.ReEstFail.Rej counter is incremented by 1 each time the eNodeB sends the message
to the UE.
The L.RRC.ReEst.ReconfFail.Rej counter is incremented by 1 each time the eNodeB receives
an RRC Connection Reestablishment Request message from the UE and the Reestablishment
Cause information element of the message is reconfigurationFailure.
The L.RRC.ReEst.HoFail.Rej counter is incremented by 1 each time the eNodeB receives an
RRC Connection Reestablishment Request message from the UE and the Reestablishment Cause
information element of the message is handoverFailure.
The L.RRC.ReEstFail.ResFail counter is incremented by 1 each time the RRC connection
reestablishment fails due to a failed resource allocation.
The L.RRC.ReEstFail.NoCntx counter is incremented by 1 each time the RRC connection
reestablishment fails because UE contexts are unavailable.
Issue 06 (2011-09-30)
23
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
24
eNodeB
Performance Counter Reference
Figure 1-11
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.RRC.ReEst.ReconfFail
.Rej
LBFD-002007
TDLBFD-002007
L.RRC.ReEst.HoFail.Rej
LBFD-002007
TDLBFD-002007
25
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.RRC.ReEstFail.ResFail
LBFD-002007
TDLBFD-002007
L.RRC.ReEstFail.NoReply
LBFD-002007
TDLBFD-002007
L.RRC.ReEstFail.Rej
LBFD-002007
TDLBFD-002007
LBFD-002007
TDLBFD-002007
L.RRC.ReEstFail.NoCnt
x
Issue 06 (2011-09-30)
26
eNodeB
Performance Counter Reference
Figure 1-12
Issue 06 (2011-09-30)
27
eNodeB
Performance Counter Reference
Figure 1-13
Counter
The following table describes the counters contained in the "E-RAB Setup Measurement (Cell)
(E-RAB.Est.Cell)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526726
668
L.ERAB.AttEst.QCI.1
Earlier than
V100R003C00
1526726
670
L.ERAB.AttEst.QCI.2
Earlier than
V100R003C00
1526726
672
L.ERAB.AttEst.QCI.3
Earlier than
V100R003C00
1526726
674
L.ERAB.AttEst.QCI.4
Earlier than
V100R003C00
1526726
676
L.ERAB.AttEst.QCI.5
Earlier than
V100R003C00
28
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526726
678
L.ERAB.AttEst.QCI.6
Earlier than
V100R003C00
1526726
680
L.ERAB.AttEst.QCI.7
Earlier than
V100R003C00
1526726
682
L.ERAB.AttEst.QCI.8
Earlier than
V100R003C00
1526726
684
L.ERAB.AttEst.QCI.9
Earlier than
V100R003C00
1526726
669
L.ERAB.SuccEst.QCI.
1
Earlier than
V100R003C00
1526726
671
L.ERAB.SuccEst.QCI.
2
Earlier than
V100R003C00
1526726
673
L.ERAB.SuccEst.QCI.
3
Earlier than
V100R003C00
1526726
675
L.ERAB.SuccEst.QCI.
4
Earlier than
V100R003C00
1526726
677
L.ERAB.SuccEst.QCI.
5
Earlier than
V100R003C00
1526726
679
L.ERAB.SuccEst.QCI.
6
Earlier than
V100R003C00
1526726
681
L.ERAB.SuccEst.QCI.
7
Earlier than
V100R003C00
1526726
683
L.ERAB.SuccEst.QCI.
8
Earlier than
V100R003C00
1526726
685
L.ERAB.SuccEst.QCI.
9
Earlier than
V100R003C00
29
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526728
274
L.ERAB.InitAttEst
V100R003C00
1526728
192
L.ERAB.InitAttEst.Q
CI.1
V100R003C00
1526728
194
L.ERAB.InitAttEst.Q
CI.2
V100R003C00
1526728
196
L.ERAB.InitAttEst.Q
CI.3
V100R003C00
1526728
198
L.ERAB.InitAttEst.Q
CI.4
V100R003C00
1526728
200
L.ERAB.InitAttEst.Q
CI.5
V100R003C00
1526728
202
L.ERAB.InitAttEst.Q
CI.6
V100R003C00
1526728
204
L.ERAB.InitAttEst.Q
CI.7
V100R003C00
1526728
206
L.ERAB.InitAttEst.Q
CI.8
V100R003C00
1526728
208
L.ERAB.InitAttEst.Q
CI.9
V100R003C00
1526728
275
L.ERAB.InitSuccEst
V100R003C00
1526728
193
L.ERAB.InitSuccEst.Q
CI.1
V100R003C00
1526728
195
L.ERAB.InitSuccEst.Q
CI.2
V100R003C00
30
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526728
197
L.ERAB.InitSuccEst.Q
CI.3
V100R003C00
1526728
199
L.ERAB.InitSuccEst.Q
CI.4
V100R003C00
1526728
201
L.ERAB.InitSuccEst.Q
CI.5
V100R003C00
1526728
203
L.ERAB.InitSuccEst.Q
CI.6
V100R003C00
1526728
205
L.ERAB.InitSuccEst.Q
CI.7
V100R003C00
1526728
207
L.ERAB.InitSuccEst.Q
CI.8
V100R003C00
1526728
209
L.ERAB.InitSuccEst.Q
CI.9
V100R003C00
1526727
544
L.E-RAB.SuccEst
Earlier than
V100R003C00
1526727
545
L.E-RAB.AttEst
Earlier than
V100R003C00
1526728
244
L.ERAB.AttEst.HOIn
V100R003C00
1526728
245
L.ERAB.SuccEst.HOI
n
V100R003C00
1526728
272
L.S1Sig.ConnEst.A
tt
V100R003C00
1526728
273
L.S1Sig.ConnEst.S
ucc
V100R003C00
31
eNodeB
Performance Counter Reference
Counter Name
Description
1526726668
L.E-RAB.AttEst.QCI.1
1526726670
L.E-RAB.AttEst.QCI.2
1526726672
L.E-RAB.AttEst.QCI.3
1526726674
L.E-RAB.AttEst.QCI.4
1526726676
L.E-RAB.AttEst.QCI.5
1526726678
L.E-RAB.AttEst.QCI.6
1526726680
L.E-RAB.AttEst.QCI.7
1526726682
L.E-RAB.AttEst.QCI.8
1526726684
L.E-RAB.AttEst.QCI.9
Description
The counters measure the number of E-RAB setup attempts initiated by UEs for each service
with a specific QCI ranging from 1 to 9 in a cell. The E-RAB setup is initiated by a UE when
the UE requests a service from the radio network. The setup is implemented through the initial
UE context setup procedure or the E-RAB setup procedure.
Measurement Point
As shown in point A in Figure 1-14 or Figure 1-15, the corresponding counter is incremented
by 1 each time the eNodeB receives an INITIAL CONTEXT SETUP REQUEST message or an
E-RAB SETUP REQUEST message from the MME. If the INITIAL CONTEXT SETUP
REQUEST message or E-RAB SETUP REQUEST message requires multiple E-RAB setup
attempts at the same time, the corresponding counter is incremented according to the QCI of
each service.
Issue 06 (2011-09-30)
32
eNodeB
Performance Counter Reference
Figure 1-14
Issue 06 (2011-09-30)
33
eNodeB
Performance Counter Reference
Figure 1-15
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.E-RAB.AttEst.QCI.1
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
L.E-RAB.AttEst.QCI.2
L.E-RAB.AttEst.QCI.3
L.E-RAB.AttEst.QCI.4
Issue 06 (2011-09-30)
34
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.E-RAB.AttEst.QCI.5
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
L.E-RAB.AttEst.QCI.6
L.E-RAB.AttEst.QCI.7
L.E-RAB.AttEst.QCI.8
L.E-RAB.AttEst.QCI.9
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526726669
L.E-RAB.SuccEst.QCI.1
1526726671
L.E-RAB.SuccEst.QCI.2
1526726673
L.E-RAB.SuccEst.QCI.3
1526726675
L.E-RAB.SuccEst.QCI.4
1526726677
L.E-RAB.SuccEst.QCI.5
1526726679
L.E-RAB.SuccEst.QCI.6
1526726681
L.E-RAB.SuccEst.QCI.7
1526726683
L.E-RAB.SuccEst.QCI.8
1526726685
L.E-RAB.SuccEst.QCI.9
35
eNodeB
Performance Counter Reference
Description
The counters measure the number of successful E-RAB setups initiated by UEs for each service
with a specific QCI ranging from 1 to 9 in a cell. The E-RAB setup is initiated by a UE when
the UE requests a service from the radio network. The setup is implemented through the initial
UE context setup procedure or the E-RAB setup procedure.
Measurement Point
As shown in point B in Figure 1-16 or Figure 1-17, the corresponding counter is incremented
by 1 each time the eNodeB sends an E-RAB SETUP RESPONSE message or an INITIAL
CONTEXT SETUP RESPONSE message to the MME. If the E-RAB SETUP RESPONSE
message or INITIAL CONTEXT SETUP RESPONSE message contains multiple E-RAB setups
at the same time, the corresponding counter is incremented according to the QCI of each service.
Figure 1-16
Issue 06 (2011-09-30)
36
eNodeB
Performance Counter Reference
Figure 1-17
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.E-RAB.SuccEst.QCI.1
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
L.E-RAB.SuccEst.QCI.2
Issue 06 (2011-09-30)
37
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.E-RAB.SuccEst.QCI.3
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
L.E-RAB.SuccEst.QCI.4
L.E-RAB.SuccEst.QCI.5
L.E-RAB.SuccEst.QCI.6
L.E-RAB.SuccEst.QCI.7
L.E-RAB.SuccEst.QCI.8
L.E-RAB.SuccEst.QCI.9
Counter Name
Description
1526728274
L.E-RAB.InitAttEst
Description
The counter measures the total number of initial E-RAB setup attempts initiated by UEs in a
cell. The initial E-RAB setup is initiated by an UE when it requests services from the radio
network, and is implemented during the initial UE context setup procedure. The L.ERAB.InitAttEst counter measures the total number of initial E-RAB setup attempts initiated by
UEs in a cell.
Measurement Point
As shown in point A in Figure 1-18, the L.E-RAB.InitAttEst counter is incremented by 1 each
time the eNodeB receives an INITIAL CONTEXT SETUP REQUEST message from the MME.
If the INITIAL CONTEXT SETUP REQUEST message requests multiple E-RAB setup
attempts at the same time, the counter is incremented repeatedly.
Issue 06 (2011-09-30)
38
eNodeB
Performance Counter Reference
Figure 1-18
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.E-RAB.InitAttEst
LBFD-002008
TDLBFD-002008
39
eNodeB
Performance Counter Reference
Counter Name
Description
1526728192
L.E-RAB.InitAttEst.QCI.1
1526728194
L.E-RAB.InitAttEst.QCI.2
1526728196
L.E-RAB.InitAttEst.QCI.3
1526728198
L.E-RAB.InitAttEst.QCI.4
1526728200
L.E-RAB.InitAttEst.QCI.5
1526728202
L.E-RAB.InitAttEst.QCI.6
1526728204
L.E-RAB.InitAttEst.QCI.7
1526728206
L.E-RAB.InitAttEst.QCI.8
1526728208
L.E-RAB.InitAttEst.QCI.9
Description
The counters measure the number of initial E-RAB setup attempts initiated by UEs for each
service with a specific QCI ranging from 1 to 9 in a cell. The initial E-RAB setup is initiated by
a UE when the UE requests a service from the radio network. The setup is implemented through
the initial UE context setup procedure.
Measurement Point
As shown in point A in Figure 1-19, the corresponding counter is incremented by 1 each time
the eNodeB receives an INITIAL CONTEXT SETUP REQUEST message from the MME
according to the QCI of each service. If the INITIAL CONTEXT SETUP REQUEST message
Issue 06 (2011-09-30)
40
eNodeB
Performance Counter Reference
requires multiple E-RAB setup attempts at the same time, the corresponding counter is
incremented repeatedly according to the QCI of each service.
Figure 1-19
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.E-RAB.InitAttEst.QCI.
1
LBFD-002008
TDLBFD-002008
41
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.E-RAB.InitAttEst.QCI.
2
LBFD-002008
TDLBFD-002008
L.E-RAB.InitAttEst.QCI.
3
LBFD-002008
TDLBFD-002008
L.E-RAB.InitAttEst.QCI.
4
LBFD-002008
TDLBFD-002008
L.E-RAB.InitAttEst.QCI.
5
LBFD-002008
TDLBFD-002008
L.E-RAB.InitAttEst.QCI.
6
LBFD-002008
TDLBFD-002008
L.E-RAB.InitAttEst.QCI.
7
LBFD-002008
TDLBFD-002008
L.E-RAB.InitAttEst.QCI.
8
LBFD-002008
TDLBFD-002008
L.E-RAB.InitAttEst.QCI.
9
LBFD-002008
TDLBFD-002008
Counter Name
Description
1526728275
L.E-RAB.InitSuccEst
Description
The counter measures the total number of successful initial E-RAB setups initiated by UEs in a
cell. The initial E-RAB setup is initiated by an UE when it requests services from the radio
network, and is implemented during the initial UE context setup procedure. The L.ERAB.InitSuccEst counter measures the total number of successful initial E-RAB setups initiated
by UEs in a cell.
Measurement Point
As shown in point B in Figure 1-20, the L.E-RAB.InitSuccEst counter is incremented by 1 each
time the eNodeB sends an INITIAL CONTEXT SETUP RESPONSE message to the MME. If
the INITIAL CONTEXT SETUP RESPONSE message contains multiple successful E-RAB
setups at the same time, the counter is incremented repeatedly.
Issue 06 (2011-09-30)
42
eNodeB
Performance Counter Reference
Figure 1-20
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.E-RAB.InitSuccEst
LBFD-002008
TDLBFD-002008
43
eNodeB
Performance Counter Reference
Counter Name
Description
1526728193
L.E-RAB.InitSuccEst.QCI.1
1526728195
L.E-RAB.InitSuccEst.QCI.2
1526728197
L.E-RAB.InitSuccEst.QCI.3
1526728199
L.E-RAB.InitSuccEst.QCI.4
1526728201
L.E-RAB.InitSuccEst.QCI.5
1526728203
L.E-RAB.InitSuccEst.QCI.6
1526728205
L.E-RAB.InitSuccEst.QCI.7
1526728207
L.E-RAB.InitSuccEst.QCI.8
1526728209
L.E-RAB.InitSuccEst.QCI.9
Description
The counters measure the number of successful initial E-RAB setups initiated by UEs for each
service with a specific QCI ranging from 1 to 9 in a cell. The initial E-RAB setup is initiated by
a UE when the UE requests a service from the radio network. The setup is implemented through
the initial UE context setup procedure.
Measurement Point
As shown in point B in Figure 1-21, the corresponding counter is incremented by 1 each time
the eNodeB sends an INITIAL CONTEXT SETUP RESPONSE message to the MME according
to the QCI of each service. If the INITIAL CONTEXT SETUP RESPONSE message contains
Issue 06 (2011-09-30)
44
eNodeB
Performance Counter Reference
multiple successful E-RAB setups at the same time, the corresponding counter is incremented
repeatedly according to the QCI of each service.
Figure 1-21
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.ERAB.InitSuccEst.QCI.1
LBFD-002008
TDLBFD-002008
45
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ERAB.InitSuccEst.QCI.2
LBFD-002008
TDLBFD-002008
L.ERAB.InitSuccEst.QCI.3
LBFD-002008
TDLBFD-002008
L.ERAB.InitSuccEst.QCI.4
LBFD-002008
TDLBFD-002008
L.ERAB.InitSuccEst.QCI.5
LBFD-002008
TDLBFD-002008
L.ERAB.InitSuccEst.QCI.6
LBFD-002008
TDLBFD-002008
L.ERAB.InitSuccEst.QCI.7
LBFD-002008
TDLBFD-002008
L.ERAB.InitSuccEst.QCI.8
LBFD-002008
TDLBFD-002008
L.ERAB.InitSuccEst.QCI.9
LBFD-002008
TDLBFD-002008
Counter Name
Description
1526727544
L.E-RAB.SuccEst
Description
The counter measures the total number of successful E-RAB setups in a cell. The E-RAB setup
is initiated by a UE when the UE requests a service from the radio network. The setup is
implemented through the initial UE context setup procedure or the E-RAB setup procedure.
Measurement Point
As shown in point B in Figure 1-22 or Figure 1-23, the corresponding counter is incremented
by 1 each time the eNodeB sends an E-RAB SETUP RESPONSE message or an INITIAL
CONTEXT SETUP RESPONSE message to the MME. If the E-RAB SETUP RESPONSE
message or INITIAL CONTEXT SETUP RESPONSE message contains multiple successful ERAB setups at the same time, the counter is incremented repeatedly.
Issue 06 (2011-09-30)
46
eNodeB
Performance Counter Reference
Figure 1-22
Issue 06 (2011-09-30)
47
eNodeB
Performance Counter Reference
Figure 1-23
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.E-RAB.SuccEst
LBFD-002008
TDLBFD-002008
48
eNodeB
Performance Counter Reference
Counter Name
Description
1526727545
L.E-RAB.AttEst
Description
The counter measures the total number of E-RAB setup attempts in a cell. The E-RAB setup is
initiated by a UE when the UE requests a service from the radio network. The setup is
implemented through the initial UE context setup procedure or the E-RAB setup procedure.
Measurement Point
As shown in point A in Figure 1-24 or Figure 1-25, the corresponding counter is incremented
by 1 each time the eNodeB receives an E-RAB SETUP REQUEST message or an INITIAL
CONTEXT SETUP REQUEST message from the MME. If the E-RAB SETUP REQUEST
message or INITIAL CONTEXT SETUP REQUEST message requires multiple E-RAB setups
at the same time, the counter is incremented repeatedly.
Figure 1-24
Issue 06 (2011-09-30)
49
eNodeB
Performance Counter Reference
Figure 1-25
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.E-RAB.AttEst
LBFD-002008
TDLBFD-002008
50
eNodeB
Performance Counter Reference
1.1.5.9 Total Number of E-RAB Setup Attempts for Incoming Handovers in a Cell
Counter
Counter ID
Counter Name
Description
1526728244
L.E-RAB.AttEst.HOIn
Description
This counter measures the total number of E-RAN setup attempts for incoming handovers in a
cell.
Measurement Point
Figure 1-26 shows an intra-eNodeB handover, Figure 1-27 shows a handover over the X2
interface, and Figure 1-28 shows a handover over the S1 interface. The counter is incremented
by 1 in the target cell each time the eNodeB decides to perform a handover after receiving a
Measurement Report message from a UE. As shown in point A in Figure 1-26, Figure 1-27, or
Figure 1-28, the counter is incremented repeatedly in the target cell if multiple E-RABs are
attempted to be set up in the target cell.
Figure 1-26
Issue 06 (2011-09-30)
51
eNodeB
Performance Counter Reference
Figure 1-27
Figure 1-28
Issue 06 (2011-09-30)
52
eNodeB
Performance Counter Reference
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.E-RAB.AttEst.HOIn
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Counter Name
Description
1526728245
L.E-RAB.SuccEst.HOIn
Description
The counter measures the total number of successful E-RAN setups for incoming handovers in
a cell.
Measurement Point
Figure 1-29 shows an intra-eNodeB handover, Figure 1-30 shows a handover over the X2
interface, and Figure 1-31 shows a handover over the S1 interface. As shown in point C in
Figure 1-29, Figure 1-30, or Figure 1-31, the counter is incremented by 1 in the target cell if
an E-RAB is successfully set up in the target cell after the handover is performed successfully.
If multiple E-RABs are successfully set up during the handover, the counter is incremented
repeatedly.
Issue 06 (2011-09-30)
53
eNodeB
Performance Counter Reference
Figure 1-29
Figure 1-30
Issue 06 (2011-09-30)
54
eNodeB
Performance Counter Reference
Figure 1-31
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.E-RAB.SuccEst.HOIn
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Issue 06 (2011-09-30)
55
eNodeB
Performance Counter Reference
Counter Name
Description
1526728272
L.S1Sig.ConnEst.Att
1526728273
L.S1Sig.ConnEst.Succ
Description
The counters measure the number of UE-specific signaling connection setups on the S1 interface,
that is, number of INITIAL UE MESSAGE messages sent from the eNodeB to the MME and
number of first S1 messages received from the MME. The eNodeB transmits the UE-specific
NAS layer data configuration to the MME through the INITIAL UE MESSAGE. The MME sets
up S1 signaling connections based on NAS information in the message. The first S1 interface
message received from the MME may be the INITIAL CONTEXT SETUP REQUEST,
DOWNLINK NAS TRANSPORT, or UE CONTEXT RELEASE COMMAND message. If the
message is received, an S1 signaling connection is set up successfully.
Measurement Point
As shown in point A in Figure 1-32, the L.S1Sig.ConnEst.Att
counter is incremented by 1 each time the eNodeB sends an INITIAL
UE MESSAGE to the MME.
As shown in point B in Figure 1-32, the L.S1Sig.ConnEst.Succ
counter is incremented by 1 each time the eNodeB receives the first
S1 interface message from the MME after sending an INITIAL UE MESSAGE
to the MME.
Issue 06 (2011-09-30)
56
eNodeB
Performance Counter Reference
Figure 1-32
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.S1Sig.ConnEst.Att
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
L.S1Sig.ConnEst.Succ
57
eNodeB
Performance Counter Reference
an E-RAB release procedure during a non-handover process. Figure 1-34 shows the
measurement points of an E-RAB release procedure during a handover.
Figure 1-33
Issue 06 (2011-09-30)
58
eNodeB
Performance Counter Reference
Figure 1-34
Counter
The following table describes the counters contained in the "E-RAB Release Measurement (Cell)
(E-RAB.Rel.Cell)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526728
282
L.ERAB.AbnormRel.R
adio
V100R003C00
1526728
283
L.ERAB.AbnormRel.T
NL
V100R003C00
1526728
284
L.ERAB.AbnormRel.C
ong
V100R003C00
1526728
291
L.ERAB.AbnormRel.
HOFailure
V100R003C00
1526728
292
L.ERAB.AbnormRel.
MME
V100R003C00
59
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526726
686
L.ERAB.AbnormRel.
QCI.1
Earlier than
V100R003C00
1526726
688
L.ERAB.AbnormRel.
QCI.2
Earlier than
V100R003C00
1526726
690
L.ERAB.AbnormRel.
QCI.3
Earlier than
V100R003C00
1526726
692
L.ERAB.AbnormRel.
QCI.4
Earlier than
V100R003C00
1526726
694
L.ERAB.AbnormRel.
QCI.5
Earlier than
V100R003C00
1526726
696
L.ERAB.AbnormRel.
QCI.6
Earlier than
V100R003C00
1526726
698
L.ERAB.AbnormRel.
QCI.7
Earlier than
V100R003C00
1526726
700
L.ERAB.AbnormRel.
QCI.8
Earlier than
V100R003C00
1526726
702
L.ERAB.AbnormRel.
QCI.9
Earlier than
V100R003C00
1526726
687
L.ERAB.NormRel.QC
I.1
Earlier than
V100R003C00
1526726
689
L.ERAB.NormRel.QC
I.2
Earlier than
V100R003C00
1526726
691
L.ERAB.NormRel.QC
I.3
Earlier than
V100R003C00
1526726
693
L.ERAB.NormRel.QC
I.4
Earlier than
V100R003C00
60
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526726
695
L.ERAB.NormRel.QC
I.5
Earlier than
V100R003C00
1526726
697
L.ERAB.NormRel.QC
I.6
Earlier than
V100R003C00
1526726
699
L.ERAB.NormRel.QC
I.7
Earlier than
V100R003C00
1526726
701
L.ERAB.NormRel.QC
I.8
Earlier than
V100R003C00
1526726
703
L.ERAB.NormRel.QC
I.9
Earlier than
V100R003C00
1526727
317
L.ERAB.NormRel.HO
Out.QCI.1
Earlier than
V100R003C00
1526727
318
L.ERAB.NormRel.HO
Out.QCI.2
Earlier than
V100R003C00
1526727
319
L.ERAB.NormRel.HO
Out.QCI.3
Earlier than
V100R003C00
1526727
320
L.ERAB.NormRel.HO
Out.QCI.4
Earlier than
V100R003C00
1526727
321
L.ERAB.NormRel.HO
Out.QCI.5
Earlier than
V100R003C00
1526727
322
L.ERAB.NormRel.HO
Out.QCI.6
Earlier than
V100R003C00
1526727
323
L.ERAB.NormRel.HO
Out.QCI.7
Earlier than
V100R003C00
1526727
324
L.ERAB.NormRel.HO
Out.QCI.8
Earlier than
V100R003C00
61
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
325
L.ERAB.NormRel.HO
Out.QCI.9
Earlier than
V100R003C00
1526727
326
L.ERAB.AbnormRel.
HOOut.QCI.1
Earlier than
V100R003C00
1526727
327
L.ERAB.AbnormRel.
HOOut.QCI.2
Earlier than
V100R003C00
1526727
328
L.ERAB.AbnormRel.
HOOut.QCI.3
Earlier than
V100R003C00
1526727
329
L.ERAB.AbnormRel.
HOOut.QCI.4
Earlier than
V100R003C00
1526727
330
L.ERAB.AbnormRel.
HOOut.QCI.5
Earlier than
V100R003C00
1526727
331
L.ERAB.AbnormRel.
HOOut.QCI.6
Earlier than
V100R003C00
1526727
332
L.ERAB.AbnormRel.
HOOut.QCI.7
Earlier than
V100R003C00
1526727
333
L.ERAB.AbnormRel.
HOOut.QCI.8
Earlier than
V100R003C00
1526727
334
L.ERAB.AbnormRel.
HOOut.QCI.9
Earlier than
V100R003C00
1526727
546
L.ERAB.AbnormRel
Earlier than
V100R003C00
1526727
547
L.E-RAB.NormRel
Earlier than
V100R003C00
1526728
246
L.ERAB.NormRel.HO
Out
V100R003C00
1526728
247
L.ERAB.AbnormRel.
HOOut
V100R003C00
62
eNodeB
Performance Counter Reference
Counter Name
Description
1526728282
L.E-RAB.AbnormRel.Radio
1526728283
L.E-RAB.AbnormRel.TNL
1526728284
L.E-RAB.AbnormRel.Cong
1526728291
L.E-RAB.AbnormRel.HOFailure
1526728292
L.E-RAB.AbnormRel.MME
Description
The counters measure the number of abnormal E-RAB releases due to different causes in a cell.
An E-RAB is the access layer bearer for carrying service data of users. The E-RAB release is a
process of releasing the access layer bearer resources of users.
Measurement Point
As shown in point A in Figure 1-35, the L.E-RAB.AbnormRel.MME counter is incremented
each time the E-RAB release is initiated by the MME and the eNodeB receives an E-RAB
RELEASE COMMAND message from the MME and the Release Cause information element
is not Normal Release, Detach, User Inactivity, cs fallback triggered, or Inter-RAT
redirection. If the E-RAB RELEASE COMMAND message requires multiple E-RAB releases
at the same time, the L.E-RAB.AbnormRel.MME counter is incremented according to the
number of E-RAB releases.
As shown in point A in Figure 1-36, the access layer bearer resources for all UEs are released
each time the UE context release is initiated by the MME and the eNodeB receives a UE
CONTEXT RELEASE COMMAND message from the MME. The L.ERAB.AbnormRel.MME counter is incremented each time the Release Cause information
element of the message is not Normal Release, Detach, User Inactivity, cs fallback
triggered, or Inter-RAT redirection. If the E-RAB RELEASE COMMAND message requires
multiple E-RAB releases at the same time, the L.E-RAB.AbnormRel.MME counter is
incremented according to the number of E-RAB releases.
As shown in point A in Figure 1-37, the eNodeB sends an E-RAB RELEASE INDICATION
message to the MME. The L.E-RAB.AbnormRel.Radio counter is incremented each time the
access layer bearer resources are abnormally released due to faults at the radio network layer.
The L.E-RAB.AbnormRel.TNL counter is incremented each time the resources are abnormally
released due to faults at the transport network layer. For details about faults at the radio network
Issue 06 (2011-09-30)
63
eNodeB
Performance Counter Reference
layer and the transport network layer, see 3GPP TS36.413. The L.E-RAB.AbnormRel.Cong
counter is incremented each time the resources are abnormally released due to network
congestion. If the E-RAB RELEASE INDICATION message requires multiple E-RAB releases
at the same time, the corresponding counter is incremented according to the number of required
E-RAB releases.
As shown in point A in Figure 1-38, the access layer bearer resources for all UEs are released
each time the eNodeB sends a UE CONTEXT RELEASE REQUEST message to the MME.
The L.E-RAB.AbnormRel.Radio counter is incremented each time the resources are abnormally
released due to faults at the radio network layer. The L.E-RAB.AbnormRel.TNL counter is
incremented each time the resources are abnormally released due to faults at the transport
network layer. For details about faults at the radio network layer and the transport network layer,
see 3GPP TS36.413. The L.E-RAB.AbnormRel.Cong counter is incremented each time the
resources are abnormally released due to network congestion, including preemption and resource
congestion. The L.E-RAB.AbnormRel.HOFailure counter is incremented each time the
resources are abnormally released due to handover failures. When the MME sends a UE
CONTEXT RELEASE COMMAND message back to the eNodeB, the corresponding counter
is not incremented repeatedly. If the UE CONTEXT RELEASE REQUEST message requires
multiple E-RAB releases at the same time, the corresponding counter is incremented according
to the number of required E-RAB releases.
Figure 1-35
Issue 06 (2011-09-30)
64
eNodeB
Performance Counter Reference
Figure 1-36
Issue 06 (2011-09-30)
65
eNodeB
Performance Counter Reference
Figure 1-37
Issue 06 (2011-09-30)
66
eNodeB
Performance Counter Reference
Figure 1-38
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.ERAB.AbnormRel.Radio
LBFD-002008
TDLBFD-002008
L.ERAB.AbnormRel.TNL
LBFD-002008
TDLBFD-002008
L.ERAB.AbnormRel.Cong
LBFD-002008
TDLBFD-002008
67
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ERAB.AbnormRel.HOFailure
LBFD-002008
TDLBFD-002008
L.ERAB.AbnormRel.MME
LBFD-002008
TDLBFD-002008
Counter Name
Description
1526726686
L.E-RAB.AbnormRel.QCI.1
1526726688
L.E-RAB.AbnormRel.QCI.2
1526726690
L.E-RAB.AbnormRel.QCI.3
1526726692
L.E-RAB.AbnormRel.QCI.4
1526726694
L.E-RAB.AbnormRel.QCI.5
1526726696
L.E-RAB.AbnormRel.QCI.6
1526726698
L.E-RAB.AbnormRel.QCI.7
1526726700
L.E-RAB.AbnormRel.QCI.8
1526726702
L.E-RAB.AbnormRel.QCI.9
Description
The counters measure the number of abnormal E-RAB releases for each service with a specific
QCI ranging from 1 to 9 in a cell. An E-RAB is the access layer bearer for carrying service data
of users. The E-RAB release is a process of releasing the access layer bearer resources of users.
It represents the capability of a cell to release access layer bearer resources for users.
Measurement Point
As shown in point A in Figure 1-39, the corresponding counter is incremented by 1 each time
the eNodeB sends an E-RAB RELEASE INDICATION message to the MME and the Release
Issue 06 (2011-09-30)
68
eNodeB
Performance Counter Reference
Cause information element is not Normal Release, Detach, User Inactivity, cs fallback
triggered, or Inter-RAT redirection. When the MME sends an E-RAB RELEASE
COMMAND message back to the eNodeB, the counter is not incremented repeatedly. If the ERAB RELEASE INDICATION message requires multiple E-RAB releases at the same time,
the corresponding counter is incremented according to the QCI of each service.
As shown in point A in Figure 1-40, the access layer bearer resources for all UEs are released
each time the eNodeB sends a UE CONTEXT RELEASE REQUEST message to the MME.
The corresponding counter is incremented according to the QCI of each service if the Release
Cause information element is not Normal Release, Detach, User Inactivity, cs fallback
triggered, or Inter-RAT redirection. When the MME sends a UE CONTEXT RELEASE
COMMAND message back to the eNodeB, the corresponding counter is not incremented
repeatedly.
Figure 1-39
Issue 06 (2011-09-30)
69
eNodeB
Performance Counter Reference
Figure 1-40
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.ERAB.AbnormRel.QCI.1
LBFD-002008
TDLBFD-002008
L.ERAB.AbnormRel.QCI.2
LBFD-002008
TDLBFD-002008
L.ERAB.AbnormRel.QCI.3
LBFD-002008
TDLBFD-002008
L.ERAB.AbnormRel.QCI.4
LBFD-002008
TDLBFD-002008
70
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ERAB.AbnormRel.QCI.5
LBFD-002008
TDLBFD-002008
L.ERAB.AbnormRel.QCI.6
LBFD-002008
TDLBFD-002008
L.ERAB.AbnormRel.QCI.7
LBFD-002008
TDLBFD-002008
L.ERAB.AbnormRel.QCI.8
LBFD-002008
TDLBFD-002008
L.ERAB.AbnormRel.QCI.9
LBFD-002008
TDLBFD-002008
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526726687
L.E-RAB.NormRel.QCI.1
1526726689
L.E-RAB.NormRel.QCI.2
1526726691
L.E-RAB.NormRel.QCI.3
1526726693
L.E-RAB.NormRel.QCI.4
1526726695
L.E-RAB.NormRel.QCI.5
1526726697
L.E-RAB.NormRel.QCI.6
1526726699
L.E-RAB.NormRel.QCI.7
1526726701
L.E-RAB.NormRel.QCI.8
1526726703
L.E-RAB.NormRel.QCI.9
71
eNodeB
Performance Counter Reference
Description
The counters measure the number of normal E-RAB releases for each service with a specific
QCI ranging from 1 to 9 in a cell. An E-RAB is the access layer bearer for carrying service data
of users. The E-RAB release is a process of releasing the access layer bearer resources of users.
It represents the capability of a cell to release access layer bearer resources for users.
Measurement Point
As shown in point A in Figure 1-41, the eNodeB receives an E-RAB RELEASE COMMAND
message from the MME. The corresponding counter is incremented according to the QCI of
each service if the E-RAB release is initiated by the MME or by the eNodeB with the Release
Cause information element of Normal Release, Detach, User Inactivity, cs fallback
triggered, or Inter-RAT redirection. If the E-RAB RELEASE COMMAND message requires
multiple E-RAB releases at the same time, the corresponding counter is incremented according
to the QCI of each service.
As shown in point A in Figure 1-42, the access layer bearer resources for all UEs are released
each time the eNodeB receives a UE CONTEXT RELEASE COMMAND message from the
MME. The corresponding counter is incremented according to the QCI of each service if the ERAB release is initiated by the MME or by the eNodeB with the Release Cause information
element of Normal Release, Detach, User Inactivity, cs fallback triggered, or Inter-RAT
redirection.
Figure 1-41
Issue 06 (2011-09-30)
72
eNodeB
Performance Counter Reference
Figure 1-42
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.E-RAB.NormRel.QCI.
1
LBFD-002008
TDLBFD-002008
L.E-RAB.NormRel.QCI.
2
LBFD-002008
TDLBFD-002008
L.E-RAB.NormRel.QCI.
3
LBFD-002008
TDLBFD-002008
L.E-RAB.NormRel.QCI.
4
LBFD-002008
TDLBFD-002008
73
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.E-RAB.NormRel.QCI.
5
LBFD-002008
TDLBFD-002008
L.E-RAB.NormRel.QCI.
6
LBFD-002008
TDLBFD-002008
L.E-RAB.NormRel.QCI.
7
LBFD-002008
TDLBFD-002008
L.E-RAB.NormRel.QCI.
8
LBFD-002008
TDLBFD-002008
L.E-RAB.NormRel.QCI.
9
LBFD-002008
TDLBFD-002008
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727317
L.ERAB.NormRel.HOOut.QCI.
1
1526727318
L.ERAB.NormRel.HOOut.QCI.
2
1526727319
L.ERAB.NormRel.HOOut.QCI.
3
1526727320
L.ERAB.NormRel.HOOut.QCI.
4
1526727321
L.ERAB.NormRel.HOOut.QCI.
5
1526727322
L.ERAB.NormRel.HOOut.QCI.
6
1526727323
L.ERAB.NormRel.HOOut.QCI.
7
74
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1526727324
L.ERAB.NormRel.HOOut.QCI.
8
1526727325
L.ERAB.NormRel.HOOut.QCI.
9
Description
The counters measure the number of normal E-RAB releases for outgoing handovers with a
specific QCI in a cell because all E-RABs for incoming handovers are set up successfully.
Measurement Point
Figure 1-43 shows an intra-eNodeB handover, Figure 1-44 shows a handover over the X2
interface, and Figure 1-45 shows a handover over the S1 interface. As shown in point C in
Figure 1-43, Figure 1-44, or Figure 1-45, the corresponding counter is incremented by 1 in the
source cell according to the QCI of each service each time the source cell normally releases the
E-RABs that correspond to the successful E-RAB setups in the target cell after an outgoing
handover is successfully performed. The Release Cause information element may be successful
handover.
Figure 1-43
Issue 06 (2011-09-30)
75
eNodeB
Performance Counter Reference
Figure 1-44
Issue 06 (2011-09-30)
76
eNodeB
Performance Counter Reference
Figure 1-45
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.ERAB.NormRel.HOOut.Q
CI.1
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Issue 06 (2011-09-30)
77
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ERAB.NormRel.HOOut.Q
CI.2
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
L.ERAB.NormRel.HOOut.Q
CI.3
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
L.ERAB.NormRel.HOOut.Q
CI.4
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
L.ERAB.NormRel.HOOut.Q
CI.5
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
L.ERAB.NormRel.HOOut.Q
CI.6
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Issue 06 (2011-09-30)
78
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ERAB.NormRel.HOOut.Q
CI.7
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
L.ERAB.NormRel.HOOut.Q
CI.8
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
L.ERAB.NormRel.HOOut.Q
CI.9
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727326
L.ERAB.AbnormRel.HOOut.Q
CI.1
1526727327
L.ERAB.AbnormRel.HOOut.Q
CI.2
1526727328
L.ERAB.AbnormRel.HOOut.Q
CI.3
79
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1526727329
L.ERAB.AbnormRel.HOOut.Q
CI.4
1526727330
L.ERAB.AbnormRel.HOOut.Q
CI.5
1526727331
L.ERAB.AbnormRel.HOOut.Q
CI.6
1526727332
L.ERAB.AbnormRel.HOOut.Q
CI.7
1526727333
L.ERAB.AbnormRel.HOOut.Q
CI.8
1526727334
L.ERAB.AbnormRel.HOOut.Q
CI.9
Description
The counters measure the number of abnormal E-RAB releases for outgoing handovers with a
specific QCI in a cell according to the number of failed E-RAB setups for incoming handovers.
Measurement Point
Figure 1-46 shows an intra-eNodeB handover, Figure 1-47 shows a handover over the X2
interface, and Figure 1-48 shows a handover over the S1 interface. As shown in point C in
Figure 1-46, Figure 1-47, or Figure 1-48, the corresponding counter is incremented by 1 in the
source cell according to the QCI of each service each time the source cell abnormally releases
the E-RABs that correspond to the failed E-RAB setups in the target cell after an outgoing
handover is successfully performed. The Release Cause information element may be Partial
Handover.
Issue 06 (2011-09-30)
80
eNodeB
Performance Counter Reference
Figure 1-46
Figure 1-47
Issue 06 (2011-09-30)
81
eNodeB
Performance Counter Reference
Figure 1-48
Formula
None
Unit
times
Issue 06 (2011-09-30)
82
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.ERAB.AbnormRel.HOOut
.QCI.1
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
L.ERAB.AbnormRel.HOOut
.QCI.2
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
L.ERAB.AbnormRel.HOOut
.QCI.3
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
L.ERAB.AbnormRel.HOOut
.QCI.4
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
L.ERAB.AbnormRel.HOOut
.QCI.5
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Issue 06 (2011-09-30)
83
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ERAB.AbnormRel.HOOut
.QCI.6
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
L.ERAB.AbnormRel.HOOut
.QCI.7
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
L.ERAB.AbnormRel.HOOut
.QCI.8
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
L.ERAB.AbnormRel.HOOut
.QCI.9
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727546
L.E-RAB.AbnormRel
84
eNodeB
Performance Counter Reference
Description
The counter measures the total number of abnormal E-RAB releases in a cell due to different
causes. An E-RAB is the access layer bearer for carrying service data of users. The E-RAB
release is a process of releasing the access layer bearer resources of users. It represents the
capability of a cell to release access layer bearer resources for users. This counter indicates the
total number of abnormal E-RAB releases due to different causes on the network.
Measurement Point
As shown in point A in Figure 1-49, the counter is incremented by 1 each time the eNodeB
sends an E-RAB RELEASE INDICATION message and the Release Cause information element
is not Normal Release, Detach, User Inactivity, cs fallback triggered, or Inter-RAT
redirection. If the E-RAB RELEASE INDICATION message requires multiple E-RAB releases
at the same time, the counter is incremented repeatedly.
As shown in point A in Figure 1-50, the access layer bearer resources for all UEs are released
each time the eNodeB sends a UE CONTEXT RELEASE REQUEST message to the MME.
The counter is incremented each time the Release Cause information element of the message is
not Normal Release, Detach, User Inactivity, cs fallback triggered, or Inter-RAT
redirection.
Figure 1-49
Issue 06 (2011-09-30)
85
eNodeB
Performance Counter Reference
Figure 1-50
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.E-RAB.AbnormRel
LBFD-002008
TDLBFD-002008
86
eNodeB
Performance Counter Reference
Counter Name
Description
1526727547
L.E-RAB.NormRel
Description
The counter measures the total number of normal E-RAB releases in a cell. An E-RAB is the
access layer bearer for carrying service data of users. The E-RAB release is a process of releasing
the access layer bearer resources of users. It represents the capability of a cell to release access
layer bearer resources for users.
Measurement Point
As shown in point A in Figure 1-51, the eNodeB receives an E-RAB RELEASE COMMAND
message from the MME. The counter is incremented by 1 if the E-RAB release is initiated by
the MME or by the eNodeB with the Release Cause information element of Normal Release,
Detach, User Inactivity, cs fallback triggered, or Inter-RAT redirection.
As shown in point A in Figure 1-52, the access layer bearer resources for all UEs are released
each time the eNodeB receives a UE CONTEXT RELEASE COMMAND message from the
MME. The counter is incremented each time the E-RAB release is initiated by the MME or by
the eNodeB with the Release Cause information element of Normal Release, Detach, User
Inactivity, cs fallback triggered, or Inter-RAT redirection.
Issue 06 (2011-09-30)
87
eNodeB
Performance Counter Reference
Figure 1-51
Issue 06 (2011-09-30)
88
eNodeB
Performance Counter Reference
Figure 1-52
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.E-RAB.NormRel
LBFD-002008
TDLBFD-002008
89
eNodeB
Performance Counter Reference
1.1.6.8 Total Number of Normal E-RAB Releases for Outgoing Handovers in a Cell
Counter
Counter ID
Counter Name
Description
1526728246
L.E-RAB.NormRel.HOOut
Description
The counter measures the total number of normal E-RAB releases for outgoing handovers in a
cell, which is caused by successful E-RAB setups for the incoming handover.
Measurement Point
Figure 1-53 shows an intra-eNodeB handover, Figure 1-54 shows a handover over the X2
interface, and Figure 1-55 shows a handover over the S1 interface. As shown in point C in
Figure 1-53, Figure 1-54, or Figure 1-55, the corresponding counter is incremented by 1 in the
source cell each time the source cell normally releases the E-RABs that correspond to the
successful E-RABs in the target cell after an outgoing handover is successfully performed and
the Release Cause information element is successful handover.
Figure 1-53
Issue 06 (2011-09-30)
90
eNodeB
Performance Counter Reference
Figure 1-54
Issue 06 (2011-09-30)
91
eNodeB
Performance Counter Reference
Figure 1-55
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.E-RAB.NormRel.HOOut
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Issue 06 (2011-09-30)
92
eNodeB
Performance Counter Reference
Counter Name
Description
1526728247
L.E-RAB.AbnormRel.HOOut
Description
The counter measures the total number of abnormal E-RAB releases for outgoing handovers in
a cell, which is caused by failed E-RAB setups for the incoming handover in the target cell.
Measurement Point
Figure 1-56 shows an intra-eNodeB handover, Figure 1-57 shows a handover over the X2
interface, and Figure 1-58 shows a handover over the S1 interface. As shown in point C in
Figure 1-56, Figure 1-57, or Figure 1-58, the counter is incremented by 1 in the source cell
each time the source cell abnormally releases an E-RAB that corresponds to a failed E-RAB
setup in the target cell after a handover is successfully performed. If multiple E-RABs are
abnormally released during the handover, the counter is incremented repeatedly in the source
cell.
Figure 1-56
Issue 06 (2011-09-30)
93
eNodeB
Performance Counter Reference
Figure 1-57
Issue 06 (2011-09-30)
94
eNodeB
Performance Counter Reference
Figure 1-58
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.ERAB.AbnormRel.HOOut
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Issue 06 (2011-09-30)
95
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
96
eNodeB
Performance Counter Reference
Counter
The following table describes the counters contained in the "E-RAB Setup Failure Measurement
(Cell) (E-RAB.EstFail.Cell)" measurement unit:
Counte
r ID
Counter Name
Description
Original Release
1526726
717
L.ERAB.FailEst.NoReply
Earlier than
V100R003C00
1526728
276
L.ERAB.FailEst.MME
V100R003C00
1526728
277
L.ERAB.FailEst.TNL
V100R003C00
1526728
278
L.ERAB.FailEst.RNL
V100R003C00
1526728
279
L.ERAB.FailEst.NoRadioRes
V100R003C00
1526728
280
L.ERAB.FailEst.SecurModeFail
V100R003C00
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526726717
L.E-RAB.FailEst.NoReply
1526728276
L.E-RAB.FailEst.MME
1526728277
L.E-RAB.FailEst.TNL
1526728278
L.E-RAB.FailEst.RNL
1526728279
L.E-RAB.FailEst.NoRadioRes
1526728280
L.E-RAB.FailEst.SecurModeFail
97
eNodeB
Performance Counter Reference
Description
The counters measure the number of E-RAB setup failures due to different causes in a cell. An
E-RAB is the access layer bearer for carrying service data of users. The E-RAB setup success
rate in a cell directly represents the capability of the cell to provide E-RAB connection setups
for users. The counters indicate the number of E-RAB setup failures due to different causes on
the network.
Measurement Point
During the initial UE context setup procedure or the E-RAB setup procedure, the corresponding
counter is incremented each time the E-RAB setup is failed due to faults in the EPC, faults at
the transport network layer, faults at the radio network layer, radio resource allocation failures,
security mode configuration failures, or no responses from the UE. The counters are measured
as follows:
As shown in point A in Figure 1-60, the L.E-RAB.FailEst.MME counter is incremented each
time the eNodeB receives an INITIAL CONTEXT SETUP REQUEST message from the MME
but the message fails the validity check performed by the eNodeB. If the INITIAL CONTEXT
SETUP REQUEST message requests multiple E-RAB setups at the same time, the counter is
incremented according to the number of required E-RAB setups. A validity check failure may
be caused by an error in the message, a repeated E-RAB ID, or a failure to process the message
due to an interaction of the initial UE context setup procedure and other S1AP-related
procedures.
As shown in point A in Figure 1-61, the L.E-RAB.FailEst.MME counter is incremented each
time the eNodeB receives an E-RAB SETUP REQUEST message from the MME but the
message fails the validity check performed by the eNodeB. If the E-RAB SETUP REQUEST
message requests multiple E-RAB setups at the same time, the counter is incremented according
to the number of required E-RAB setups. A validity check failure may be caused by an error in
the message, a repeated E-RAB ID, or a failure to process the message due to an interaction of
the E-RAB setup procedure and other S1AP-related procedures.
As shown in point A in Figure 1-60, the corresponding counter is incremented each time the
eNodeB sends an INITIAL CONTEXT SETUP RESPONSE message or an INITIAL
CONTEXT SETUP FAILURE message to the MME after receiving an INITIAL CONTEXT
SETUP REQUEST message from the MME. The E-RAB setup failure is caused by faults during
the E-RAB setup procedure. The L.E-RAB.FailEst.TNL counter is incremented each time the
failure is caused by faults at the transport network layer. The L.E-RAB.FailEst.RNL counter is
incremented each time the failure is caused by faults at the radio network layer. For details about
faults at the transport network layer and the radio network layer, see 3GPP TS36.413. The L.ERAB.FailEst.NoRadioRes counter is incremented each time the failure is caused by insufficient
radio resources. If there are multiple E-RAB setup failures, the corresponding counter is
incremented according to the number of E-RAB setup failures. The L.E-RAB.FailEst.RNL
counter involves the measurement of the L.E-RAB.FailEst.NoRadioRes, L.ERAB.FailEst.SecurModeFail, and L.E-RAB.FailEst.NoReply counters.
As shown in point A in Figure 1-61, the corresponding counter is incremented each time the
eNodeB sends an E-RAB SETUP RESPONSE message to the MME after receiving an E-RAB
SETUP REQUEST message from the MME. The E-RAB setup failure is caused by faults during
the E-RAB setup procedure. The L.E-RAB.FailEst.TNL counter is incremented each time the
failure is caused by faults at the transport network layer. The L.E-RAB.FailEst.RNL counter is
Issue 06 (2011-09-30)
98
eNodeB
Performance Counter Reference
incremented each time the failure is caused by faults at the radio network layer. For details about
faults at the transport network layer and the radio network layer, see 3GPP TS36.413. The L.ERAB.FailEst.NoRadioRes counter is incremented each time the failure is caused by insufficient
radio resources. If there are multiple E-RAB setup failures, the corresponding counter is
incremented according to the number of E-RAB setup failures. The L.E-RAB.FailEst.RNL
counter involves the measurement of the L.E-RAB.FailEst.NoRadioRes, L.ERAB.FailEst.SecurModeFail, and L.E-RAB.FailEst.NoReply counters.
As shown in point A in Figure 1-62, the L.E-RAB.FailEst.SecurModeFail counter is
incremented each time the eNodeB sends a Security Mode Command message to the UE but
receives a Security Mode Failure message from the UE after receiving an INITIAL CONTEXT
SETUP REQUEST message from the MME. If the INITIAL CONTEXT SETUP REQUEST
message requires multiple E-RAB setups at the same time, the counter is incremented according
to the number of required E-RAB setups.
As shown in points A, B, C, and D in Figure 1-63, the L.E-RAB.FailEst.NoReply counter is
incremented each time the eNodeB receives no responses from the UE before the corresponding
timer expires after sending an RRC signaling message to the UE during the initial UE context
setup procedure or the E-RAB setup procedure. If the INITIAL CONTEXT SETUP REQUEST
or E-RAB SETUP REQUEST message requires multiple E-RAB setups at the same time, the
counter is incremented according to the number of required E-RAB setups.
Figure 1-60
Issue 06 (2011-09-30)
99
eNodeB
Performance Counter Reference
Figure 1-61
Figure 1-62
Issue 06 (2011-09-30)
100
eNodeB
Performance Counter Reference
Figure 1-63
Formula
None
Unit
times
Issue 06 (2011-09-30)
101
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.E-RAB.FailEst.NoReply
LBFD-002008
TDLBFD-002008
L.E-RAB.FailEst.MME
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
L.E-RAB.FailEst.NoRadioRes
LBFD-002008
TDLBFD-002008
L.E-RAB.FailEst.SecurModeFail
LBFD-002008
TDLBFD-002008
L.E-RAB.FailEst.TNL
L.E-RAB.FailEst.RNL
Issue 06 (2011-09-30)
102
eNodeB
Performance Counter Reference
Figure 1-64
Counter
The following table describes the counters contained in the "E-RAB Modification Measurement
(Cell) (E-RAB.Modify.Cell)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
513
L.ERAB.AttModify.Q
CI.1
Earlier than
V100R003C00
1526727
515
L.ERAB.AttModify.Q
CI.2
Earlier than
V100R003C00
1526727
517
L.ERAB.AttModify.Q
CI.3
Earlier than
V100R003C00
1526727
519
L.ERAB.AttModify.Q
CI.4
Earlier than
V100R003C00
1526727
521
L.ERAB.AttModify.Q
CI.5
Earlier than
V100R003C00
1526727
523
L.ERAB.AttModify.Q
CI.6
Earlier than
V100R003C00
103
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
525
L.ERAB.AttModify.Q
CI.7
Earlier than
V100R003C00
1526727
527
L.ERAB.AttModify.Q
CI.8
Earlier than
V100R003C00
1526727
529
L.ERAB.AttModify.Q
CI.9
Earlier than
V100R003C00
1526727
514
L.ERAB.SuccModify.
QCI.1
Earlier than
V100R003C00
1526727
516
L.ERAB.SuccModify.
QCI.2
Earlier than
V100R003C00
1526727
518
L.ERAB.SuccModify.
QCI.3
Earlier than
V100R003C00
1526727
520
L.ERAB.SuccModify.
QCI.4
Earlier than
V100R003C00
1526727
522
L.ERAB.SuccModify.
QCI.5
Earlier than
V100R003C00
1526727
524
L.ERAB.SuccModify.
QCI.6
Earlier than
V100R003C00
1526727
526
L.ERAB.SuccModify.
QCI.7
Earlier than
V100R003C00
1526727
528
L.ERAB.SuccModify.
QCI.8
Earlier than
V100R003C00
104
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1526727
530
L.ERAB.SuccModify.
QCI.9
Earlier than
V100R003C00
1526728
248
L.ERAB.AttModify
V100R003C00
1526728
249
L.ERAB.SuccModify
V100R003C00
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727513
L.E-RAB.AttModify.QCI.1
1526727515
L.E-RAB.AttModify.QCI.2
1526727517
L.E-RAB.AttModify.QCI.3
1526727519
L.E-RAB.AttModify.QCI.4
1526727521
L.E-RAB.AttModify.QCI.5
1526727523
L.E-RAB.AttModify.QCI.6
1526727525
L.E-RAB.AttModify.QCI.7
1526727527
L.E-RAB.AttModify.QCI.8
105
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1526727529
L.E-RAB.AttModify.QCI.9
Description
The counters measure the number of E-RAB modification attempts for each service with a
specific QCI ranging from 1 to 9 in a cell.
Measurement Point
As shown in point A in Figure 1-65, the corresponding counter is incremented by 1 each time
the eNodeB receives an E-RAB MODIFY REQUEST message from the MME. If the E-RAB
MODIFY REQUEST message requires multiple E-RAB modification attempts at the same time,
the corresponding counter is incremented according to the QCI of each service.
Figure 1-65
Formula
None
Issue 06 (2011-09-30)
106
eNodeB
Performance Counter Reference
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.ERAB.AttModify.QCI.1
LBFD-002008
TDLBFD-002008
L.ERAB.AttModify.QCI.2
LBFD-002008
TDLBFD-002008
L.ERAB.AttModify.QCI.3
LBFD-002008
TDLBFD-002008
L.ERAB.AttModify.QCI.4
LBFD-002008
TDLBFD-002008
L.ERAB.AttModify.QCI.5
LBFD-002008
TDLBFD-002008
L.ERAB.AttModify.QCI.6
LBFD-002008
TDLBFD-002008
L.ERAB.AttModify.QCI.7
LBFD-002008
TDLBFD-002008
L.ERAB.AttModify.QCI.8
LBFD-002008
TDLBFD-002008
L.ERAB.AttModify.QCI.9
LBFD-002008
TDLBFD-002008
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727514
L.E-RAB.SuccModify.QCI.
1
1526727516
L.E-RAB.SuccModify.QCI.
2
107
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1526727518
L.E-RAB.SuccModify.QCI.
3
1526727520
L.E-RAB.SuccModify.QCI.
4
1526727522
L.E-RAB.SuccModify.QCI.
5
1526727524
L.E-RAB.SuccModify.QCI.
6
1526727526
L.E-RAB.SuccModify.QCI.
7
1526727528
L.E-RAB.SuccModify.QCI.
8
1526727530
L.E-RAB.SuccModify.QCI.
9
Description
The counters measure the number of successful E-RAB modifications for each service with a
specific QCI ranging from 1 to 9 in a cell.
Measurement Point
As shown in point B in Figure 1-66, the corresponding counter is incremented by 1 each time
the eNodeB sends an E-RAB MODIFY RESPONSE message to the MME. If the E-RAB
MODIFY RESPONSE message contains multiple successful E-RAB modifications at the same
time, the corresponding counter is incremented according to the QCI of each service.
Issue 06 (2011-09-30)
108
eNodeB
Performance Counter Reference
Figure 1-66
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.ERAB.SuccModify.QCI.1
LBFD-002008
TDLBFD-002008
L.ERAB.SuccModify.QCI.2
LBFD-002008
TDLBFD-002008
L.ERAB.SuccModify.QCI.3
LBFD-002008
TDLBFD-002008
L.ERAB.SuccModify.QCI.4
LBFD-002008
TDLBFD-002008
109
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ERAB.SuccModify.QCI.5
LBFD-002008
TDLBFD-002008
L.ERAB.SuccModify.QCI.6
LBFD-002008
TDLBFD-002008
L.ERAB.SuccModify.QCI.7
LBFD-002008
TDLBFD-002008
L.ERAB.SuccModify.QCI.8
LBFD-002008
TDLBFD-002008
L.ERAB.SuccModify.QCI.9
LBFD-002008
TDLBFD-002008
Counter Name
Description
1526728248
L.E-RAB.AttModify
Description
The counter measures the total number of E-RAB modification attempts in a cell.
Measurement Point
As shown in point A in Figure 1-67, the corresponding counter is incremented by 1 each time
the eNodeB receives an E-RAB MODIFY REQUEST message from the MME. If the message
requests multiple E-RAB modifications at the same time, the counter is incremented repeatedly.
Issue 06 (2011-09-30)
110
eNodeB
Performance Counter Reference
Figure 1-67
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.E-RAB.AttModify
LBFD-002008
TDLBFD-002008
111
eNodeB
Performance Counter Reference
Counter Name
Description
1526728249
L.E-RAB.SuccModify
Description
The counter measures the total number of successful E-RAB modifications in a cell.
Measurement Point
As shown in point B in Figure 1-68, the counter is incremented by 1 each time the eNodeB
sends an E-RAB MODIFY RESPONSE message to the MME. If the E-RAB MODIFY
RESPONSE message contains multiple successful E-RAB modifications at the same time, the
counter is incremented repeatedly.
Figure 1-68
Formula
None
Issue 06 (2011-09-30)
112
eNodeB
Performance Counter Reference
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.E-RAB.SuccModify
LBFD-002008
TDLBFD-002008
Counter
The following table describes the counters contained in the "Cell Algo Measurement (Cell)
(Algo.Cell)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526726
760
L.LC.ULCong.Nu
m.Cell
Earlier than
V100R003C00
1526726
762
L.LC.DLCong.Nu
m.Cell
Earlier than
V100R003C00
1526726
761
L.LC.ULCong.Dur
.Cell
Earlier than
V100R003C00
1526726
763
L.LC.DLCong.Dur
.Cell
Earlier than
V100R003C00
1526726
764
L.LC.User.Rel
Earlier than
V100R003C00
1526726
765
L.LC.GBR.UL.Degraded
Earlier than
V100R003C00
1526726
766
L.LC.GBR.DL.Degraded
Earlier than
V100R003C00
1526727
209
L.Cell.Unavail.Dur
.Sys
Earlier than
V100R003C00
113
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1526727
210
L.Cell.Unavail.Dur
.Manual
Earlier than
V100R003C00
Counter Name
Description
1526726760
L.LC.ULCong.Num.Cell
1526726762
L.LC.DLCong.Num.Cell
Description
The counters measure the number of times uplink or downlink congestion occurs in a cell. When
the uplink or downlink QoS satisfaction rate of each service with a different QCI ranging from
1 to 4 in a cell is lower than the congestion threshold, the uplink or downlink of the cell is
congested.
Measurement Point
The corresponding counter is incremented by 1 each time the uplink or downlink of a cell
becomes congested and the uplink or downlink QoS satisfaction rate of each service with a
different QCI ranging from 1 to 4 in a cell is lower than the congestion threshold.
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.LC.ULCong.Num.Cell
LBFD-002024
Congestion Control
TDLBFD-002024
Congestion Control
LBFD-002024
Congestion Control
TDLBFD-002024
Congestion Control
L.LC.DLCong.Num.Cell
Issue 06 (2011-09-30)
114
eNodeB
Performance Counter Reference
Counter Name
Description
1526726761
L.LC.ULCong.Dur.Cell
1526726763
L.LC.DLCong.Dur.Cell
Description
The counters measure the duration of uplink or downlink congestion in a cell. When the uplink
or downlink QoS satisfaction rate of each service with a different QCI ranging from 1 to 4 in a
cell is lower than the congestion threshold, the uplink or downlink of the cell is congested.
Measurement Point
The duration of uplink or downlink congestion in a cell is sampled every five seconds. The
corresponding counter is incremented by 5 each time the cell is congested. At the end of a
measurement period, the sum of these sampling results is used as the value of the corresponding
counter. A deviation of one sampling period may be caused in the sampling timer when the timer
performs time synchronization. As a result, a deviation of one sampling period will also be
generated in the value of the corresponding counter, which affects the values of the KPIs that
are calculated by using the counter. The effects vary depending on the deviation in the value of
the counter and calculation formulas for the KPIs.
Formula
None
Unit
s
Related Features
Counter Name
Feature ID
Feature Name
L.LC.ULCong.Dur.Cell
LBFD-002024
Congestion Control
TDLBFD-002024
Congestion Control
LBFD-002024
Congestion Control
TDLBFD-002024
Congestion Control
L.LC.DLCong.Dur.Cell
Issue 06 (2011-09-30)
115
eNodeB
Performance Counter Reference
Counter Name
Description
1526726764
L.LC.User.Rel
Description
The counter measures the number of service releases due to congestion in a cell.
Measurement Point
The counter is incremented by 1 each time a service is released due to congestion in a cell.
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.LC.User.Rel
LBFD-002024
Congestion Control
TDLBFD-002024
Congestion Control
Counter Name
Description
1526726765
L.LC.GBR.UL.Degraded
1526726766
L.LC.GBR.DL.Degraded
Description
The counters measure the number of times that the uplink and downlink GBR are decreased due
to congestion in a cell, respectively.
Issue 06 (2011-09-30)
116
eNodeB
Performance Counter Reference
Measurement Point
The corresponding counter is incremented by 1 each time the uplink or downlink GBR is
decreased due to congestion in a cell.
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.LC.GBR.UL.Degraded
LBFD-002024
Congestion Control
TDLBFD-002024
Congestion Control
LBFD-002024
Congestion Control
TDLBFD-002024
Congestion Control
L.LC.GBR.DL.Degraded
Counter Name
Description
1526727209
L.Cell.Unavail.Dur.Sys
1526727210
L.Cell.Unavail.Dur.Manual
Description
The counters measure the duration of cell unavailability due to human factors or non-human
factors. Human factors are caused by operation and maintenance such as blocking or deactivating
a cell, or configuring automatic power-off for the eNodeB by using MML commands. Nonhuman factors are caused by other reasons such as faults on a board, faults on a CPRI link, faults
on the LBBP carrying services, faults on TX or RX channels of an RF module, unavailability
of control plane transmission resources on the S1 link, unavailability of user plane transmission
resources on the IP path, insufficiency of licenses, or unavailability of clocks.
Measurement Point
The duration of cell unavailability is sampled every five seconds. If a cell is unavailable, the
corresponding counter is incremented by 5 at each sampling point accordingly. At the end of a
measurement period, the sum of these sampling results is reported. A deviation of one sampling
Issue 06 (2011-09-30)
117
eNodeB
Performance Counter Reference
period may be caused in the sampling timer when the timer performs time synchronization. As
a result, a deviation of one sampling period will also be generated in the value of the
corresponding counter, which affects the values of the KPIs that are calculated by using the
counter. The effects vary depending on the deviation in the value of the counter and calculation
formulas for the KPIs.
Formula
None
Unit
s
Related Features
Counter Name
Feature ID
Feature Name
L.Cell.Unavail.Dur.Sys
None
None
L.Cell.Unavail.Dur.Manual
None
None
Counter
The following table describes the counters contained in the "DRB Measurement (Cell)
(Traffic.DRB.Cell)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526728
258
L.Traffic.DRB
V100R003C00
1526726
767
L.Traffic.DRB.QCI
.1
Earlier than
V100R003C00
1526726
768
L.Traffic.DRB.QCI
.2
Earlier than
V100R003C00
1526726
769
L.Traffic.DRB.QCI
.3
Earlier than
V100R003C00
118
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1526726
770
L.Traffic.DRB.QCI
.4
Earlier than
V100R003C00
1526726
771
L.Traffic.DRB.QCI
.5
Earlier than
V100R003C00
1526726
772
L.Traffic.DRB.QCI
.6
Earlier than
V100R003C00
1526726
773
L.Traffic.DRB.QCI
.7
Earlier than
V100R003C00
1526726
774
L.Traffic.DRB.QCI
.8
Earlier than
V100R003C00
1526726
775
L.Traffic.DRB.QCI
.9
Earlier than
V100R003C00
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526728258
L.Traffic.DRB
1526726767
L.Traffic.DRB.QCI.1
1526726768
L.Traffic.DRB.QCI.2
1526726769
L.Traffic.DRB.QCI.3
1526726770
L.Traffic.DRB.QCI.4
1526726771
L.Traffic.DRB.QCI.5
1526726772
L.Traffic.DRB.QCI.6
1526726773
L.Traffic.DRB.QCI.7
1526726774
L.Traffic.DRB.QCI.8
119
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1526726775
L.Traffic.DRB.QCI.9
Description
The counters measure the number of DRBs for each service with a specific QCI ranging from
1 to 9 in a cell, respectively.
Measurement Point
The number of DRBs for each service with a specific QCI ranging from 1 to 9 in a cell is sampled
every second. At the end of a measurement period, the average of these sampling results is used
as the value of the corresponding counter.
Formula
None
Unit
None
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.DRB
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
L.Traffic.DRB.QCI.1
L.Traffic.DRB.QCI.2
L.Traffic.DRB.QCI.3
L.Traffic.DRB.QCI.4
L.Traffic.DRB.QCI.5
L.Traffic.DRB.QCI.6
Issue 06 (2011-09-30)
120
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.Traffic.DRB.QCI.7
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
LBFD-002008
TDLBFD-002008
L.Traffic.DRB.QCI.8
L.Traffic.DRB.QCI.9
Counter
The following table describes the counters contained in the "Throughput Measurement (Cell)
(Traffic.Thruput.Cell)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526728
178
L.Thrp.bits.DL.SR
B
V100R003C00
1526728
179
L.Thrp.bits.UL.SR
B
V100R003C00
1526728
259
L.Thrp.bits.UL
V100R003C00
1526726
776
L.Thrp.bits.UL.QC
I.1
Earlier than
V100R003C00
1526726
779
L.Thrp.bits.UL.QC
I.2
Earlier than
V100R003C00
1526726
782
L.Thrp.bits.UL.QC
I.3
Earlier than
V100R003C00
121
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526726
785
L.Thrp.bits.UL.QC
I.4
Earlier than
V100R003C00
1526726
788
L.Thrp.bits.UL.QC
I.5
Earlier than
V100R003C00
1526726
791
L.Thrp.bits.UL.QC
I.6
Earlier than
V100R003C00
1526726
794
L.Thrp.bits.UL.QC
I.7
Earlier than
V100R003C00
1526726
797
L.Thrp.bits.UL.QC
I.8
Earlier than
V100R003C00
1526726
800
L.Thrp.bits.UL.QC
I.9
Earlier than
V100R003C00
1526728
261
L.Thrp.bits.DL
V100R003C00
1526726
803
L.Thrp.bits.DL.QC
I.1
Earlier than
V100R003C00
1526726
806
L.Thrp.bits.DL.QC
I.2
Earlier than
V100R003C00
1526726
809
L.Thrp.bits.DL.QC
I.3
Earlier than
V100R003C00
1526726
812
L.Thrp.bits.DL.QC
I.4
Earlier than
V100R003C00
1526726
815
L.Thrp.bits.DL.QC
I.5
Earlier than
V100R003C00
1526726
818
L.Thrp.bits.DL.QC
I.6
Earlier than
V100R003C00
122
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526726
821
L.Thrp.bits.DL.QC
I.7
Earlier than
V100R003C00
1526726
824
L.Thrp.bits.DL.QC
I.8
Earlier than
V100R003C00
1526726
827
L.Thrp.bits.DL.QC
I.9
Earlier than
V100R003C00
1526727
045
L.Thrp.bits.UL.QC
I.1.Max
Earlier than
V100R003C00
1526727
046
L.Thrp.bits.UL.QC
I.2.Max
Earlier than
V100R003C00
1526727
047
L.Thrp.bits.UL.QC
I.3.Max
Earlier than
V100R003C00
1526727
048
L.Thrp.bits.UL.QC
I.4.Max
Earlier than
V100R003C00
1526727
049
L.Thrp.bits.UL.QC
I.5.Max
Earlier than
V100R003C00
1526727
050
L.Thrp.bits.UL.QC
I.6.Max
Earlier than
V100R003C00
1526727
051
L.Thrp.bits.UL.QC
I.7.Max
Earlier than
V100R003C00
1526727
052
L.Thrp.bits.UL.QC
I.8.Max
Earlier than
V100R003C00
1526727
053
L.Thrp.bits.UL.QC
I.9.Max
Earlier than
V100R003C00
1526727
054
L.Thrp.bits.UL.Ma
x
Earlier than
V100R003C00
123
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
055
L.Thrp.bits.DL.QC
I.1.Max
Earlier than
V100R003C00
1526727
056
L.Thrp.bits.DL.QC
I.2.Max
Earlier than
V100R003C00
1526727
057
L.Thrp.bits.DL.QC
I.3.Max
Earlier than
V100R003C00
1526727
058
L.Thrp.bits.DL.QC
I.4.Max
Earlier than
V100R003C00
1526727
059
L.Thrp.bits.DL.QC
I.5.Max
Earlier than
V100R003C00
1526727
060
L.Thrp.bits.DL.QC
I.6.Max
Earlier than
V100R003C00
1526727
061
L.Thrp.bits.DL.QC
I.7.Max
Earlier than
V100R003C00
1526727
062
L.Thrp.bits.DL.QC
I.8.Max
Earlier than
V100R003C00
1526727
063
L.Thrp.bits.DL.QC
I.9.Max
Earlier than
V100R003C00
1526727
064
L.Thrp.bits.DL.Ma
x
Earlier than
V100R003C00
1526728
262
L.Thrp.Time.DL
V100R003C00
1526726
804
L.Thrp.Time.DL.Q
CI.1
V100R003C00
1526726
807
L.Thrp.Time.DL.Q
CI.2
V100R003C00
124
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526726
810
L.Thrp.Time.DL.Q
CI.3
V100R003C00
1526726
813
L.Thrp.Time.DL.Q
CI.4
V100R003C00
1526726
816
L.Thrp.Time.DL.Q
CI.5
V100R003C00
1526726
819
L.Thrp.Time.DL.Q
CI.6
V100R003C00
1526726
822
L.Thrp.Time.DL.Q
CI.7
V100R003C00
1526726
825
L.Thrp.Time.DL.Q
CI.8
V100R003C00
1526726
828
L.Thrp.Time.DL.Q
CI.9
V100R003C00
1526728
260
L.Thrp.Time.UL
V100R003C00
1526726
777
L.Thrp.Time.UL.Q
CI.1
V100R003C00
1526726
780
L.Thrp.Time.UL.Q
CI.2
V100R003C00
1526726
783
L.Thrp.Time.UL.Q
CI.3
V100R003C00
1526726
786
L.Thrp.Time.UL.Q
CI.4
V100R003C00
1526726
789
L.Thrp.Time.UL.Q
CI.5
V100R003C00
125
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526726
792
L.Thrp.Time.UL.Q
CI.6
V100R003C00
1526726
795
L.Thrp.Time.UL.Q
CI.7
V100R003C00
1526726
798
L.Thrp.Time.UL.Q
CI.8
V100R003C00
1526726
801
L.Thrp.Time.UL.Q
CI.9
V100R003C00
1526728
232
L.Thrp.Time.Cell.
DL
V100R003C00
1526728
233
L.Thrp.Time.Cell.
UL
V100R003C00
1526728
234
L.ERAB.SessionTime.
QCI1
V100R003C00
1526728
235
L.ERAB.SessionTime.
QCI2
V100R003C00
1526728
236
L.ERAB.SessionTime.
QCI3
V100R003C00
1526728
237
L.ERAB.SessionTime.
QCI4
V100R003C00
1526728
238
L.ERAB.SessionTime.
QCI5
V100R003C00
1526728
239
L.ERAB.SessionTime.
QCI6
V100R003C00
1526728
240
L.ERAB.SessionTime.
QCI7
V100R003C00
1526728
241
L.ERAB.SessionTime.
QCI8
V100R003C00
126
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1526728
242
L.ERAB.SessionTime.
QCI9
V100R003C00
1526728
243
L.ERAB.SessionTime.
UE
V100R003C00
Counter Name
Description
1526728178
L.Thrp.bits.DL.SRB
Description
The counter measures the total bits of successfully transmitted signaling SDUs on SRBs at the
PDCP layer.
Measurement Point
The total bits of successfully transmitted signaling SDUs on SRBs at the PDCP layer are sampled
per second. At the end of a measurement period, the sum of these sampling results is used as the
value of the counter.
Formula
None
Unit
bit
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.Thrp.bits.DL.SRB
LBFD-002008
TDLBFD-002008
127
eNodeB
Performance Counter Reference
1.1.11.2 Total Bits of Successfully Received Signaling SDUs on SRBs at the PDCP
Layer
Counter
Counter ID
Counter Name
Description
1526728179
L.Thrp.bits.UL.SRB
Description
The counter measures the total bits of successfully received signaling SDUs on SRBs at the
PDCP layer.
Measurement Point
The total bits of successfully received signaling SDUs on SRBs at the PDCP layer are sampled
per second. At the end of a measurement period, the sum of these sampling results is used as the
value of the counter.
Formula
None
Unit
bit
Related Features
Counter Name
Feature ID
Feature Name
L.Thrp.bits.UL.SRB
LBFD-002008
TDLBFD-002008
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526728259
L.Thrp.bits.UL
1526726776
L.Thrp.bits.UL.QCI.1
128
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1526726779
L.Thrp.bits.UL.QCI.2
1526726782
L.Thrp.bits.UL.QCI.3
1526726785
L.Thrp.bits.UL.QCI.4
1526726788
L.Thrp.bits.UL.QCI.5
1526726791
L.Thrp.bits.UL.QCI.6
1526726794
L.Thrp.bits.UL.QCI.7
1526726797
L.Thrp.bits.UL.QCI.8
1526726800
L.Thrp.bits.UL.QCI.9
Description
The counters measure the total traffic volume of received PDCP SDUs for each service with a
specific QCI ranging from 1 to 9 in a cell.
Measurement Point
The size of the payloads in the received PDCP SDUs of each service with a specific QCI is
sampled in a cell. At the end of a measurement period, the sum of these sampling results is used
as the value of the corresponding counter.
Formula
None
Unit
bit
Issue 06 (2011-09-30)
129
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.Thrp.bits.UL
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.Thrp.bits.UL.QCI.1
L.Thrp.bits.UL.QCI.2
L.Thrp.bits.UL.QCI.3
L.Thrp.bits.UL.QCI.4
L.Thrp.bits.UL.QCI.5
L.Thrp.bits.UL.QCI.6
L.Thrp.bits.UL.QCI.7
Issue 06 (2011-09-30)
130
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.Thrp.bits.UL.QCI.8
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.Thrp.bits.UL.QCI.9
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526728261
L.Thrp.bits.DL
1526726803
L.Thrp.bits.DL.QCI.1
1526726806
L.Thrp.bits.DL.QCI.2
1526726809
L.Thrp.bits.DL.QCI.3
1526726812
L.Thrp.bits.DL.QCI.4
1526726815
L.Thrp.bits.DL.QCI.5
1526726818
L.Thrp.bits.DL.QCI.6
1526726821
L.Thrp.bits.DL.QCI.7
1526726824
L.Thrp.bits.DL.QCI.8
1526726827
L.Thrp.bits.DL.QCI.9
131
eNodeB
Performance Counter Reference
Description
The counters measure the total traffic volume of transmitted PDCP SDUs for each service with
a specific QCI ranging from 1 to 9 in a cell.
Measurement Point
The size of the payloads in the transmitted PDCP SDUs of each service with a specific QCI is
sampled in a cell. At the end of a measurement period, the sum of these sampling results is used
as the value of the corresponding counter.
Formula
None
Unit
bit
Related Features
Counter Name
Feature ID
Feature Name
L.Thrp.bits.DL
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.Thrp.bits.DL.QCI.1
L.Thrp.bits.DL.QCI.2
L.Thrp.bits.DL.QCI.3
L.Thrp.bits.DL.QCI.4
Issue 06 (2011-09-30)
132
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.Thrp.bits.DL.QCI.5
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.Thrp.bits.DL.QCI.6
L.Thrp.bits.DL.QCI.7
L.Thrp.bits.DL.QCI.8
L.Thrp.bits.DL.QCI.9
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727045
L.Thrp.bits.UL.QCI.1.Max
1526727046
L.Thrp.bits.UL.QCI.2.Max
1526727047
L.Thrp.bits.UL.QCI.3.Max
1526727048
L.Thrp.bits.UL.QCI.4.Max
1526727049
L.Thrp.bits.UL.QCI.5.Max
133
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1526727050
L.Thrp.bits.UL.QCI.6.Max
1526727051
L.Thrp.bits.UL.QCI.7.Max
1526727052
L.Thrp.bits.UL.QCI.8.Max
1526727053
L.Thrp.bits.UL.QCI.9.Max
1526727054
L.Thrp.bits.UL.Max
Description
The counters measure the maximum traffic volume of received PDCP SDUs for each service
with a specific QCI ranging from 1 to 9 in a cell.
Measurement Point
The size of the payloads in the received PDCP SDUs of each service with a specific QCI ranging
from 1 to 9 is sampled per second in a cell. At the end of a measurement period, the maximum
of these sampling results is used as the value of the corresponding counter.
Formula
None
Unit
bit
Related Features
Counter Name
Feature ID
Feature Name
L.Thrp.bits.UL.QCI.
1.Max
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.Thrp.bits.UL.QCI.
2.Max
Issue 06 (2011-09-30)
134
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.Thrp.bits.UL.QCI.
3.Max
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.Thrp.bits.UL.QCI.
4.Max
L.Thrp.bits.UL.QCI.
5.Max
L.Thrp.bits.UL.QCI.
6.Max
L.Thrp.bits.UL.QCI.
7.Max
L.Thrp.bits.UL.QCI.
8.Max
L.Thrp.bits.UL.QCI.
9.Max
L.Thrp.bits.UL.Max
Issue 06 (2011-09-30)
135
eNodeB
Performance Counter Reference
Counter Name
Description
1526727055
L.Thrp.bits.DL.QCI.1.Max
1526727056
L.Thrp.bits.DL.QCI.2.Max
1526727057
L.Thrp.bits.DL.QCI.3.Max
1526727058
L.Thrp.bits.DL.QCI.4.Max
1526727059
L.Thrp.bits.DL.QCI.5.Max
1526727060
L.Thrp.bits.DL.QCI.6.Max
1526727061
L.Thrp.bits.DL.QCI.7.Max
1526727062
L.Thrp.bits.DL.QCI.8.Max
1526727063
L.Thrp.bits.DL.QCI.9.Max
1526727064
L.Thrp.bits.DL.Max
Description
The counters measure the maximum traffic volume of transmitted PDCP SDUs for each service
with a specific QCI ranging from 1 to 9 in a cell.
Measurement Point
The size of the payloads in the transmitted PDCP SDUs of each service with a specific QCI
ranging from 1 to 9 is sampled per second in a cell. At the end of a measurement period, the
maximum of these sampling results is used as the value of the corresponding counter.
Formula
None
Unit
bit
Issue 06 (2011-09-30)
136
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.Thrp.bits.DL.QCI.
1.Max
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.Thrp.bits.DL.QCI.
2.Max
L.Thrp.bits.DL.QCI.
3.Max
L.Thrp.bits.DL.QCI.
4.Max
L.Thrp.bits.DL.QCI.
5.Max
L.Thrp.bits.DL.QCI.
6.Max
L.Thrp.bits.DL.QCI.
7.Max
L.Thrp.bits.DL.QCI.
8.Max
Issue 06 (2011-09-30)
137
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.Thrp.bits.DL.QCI.
9.Max
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.Thrp.bits.DL.Max
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526728262
L.Thrp.Time.DL
1526726804
L.Thrp.Time.DL.QCI.1
1526726807
L.Thrp.Time.DL.QCI.2
1526726810
L.Thrp.Time.DL.QCI.3
1526726813
L.Thrp.Time.DL.QCI.4
1526726816
L.Thrp.Time.DL.QCI.5
1526726819
L.Thrp.Time.DL.QCI.6
1526726822
L.Thrp.Time.DL.QCI.7
1526726825
L.Thrp.Time.DL.QCI.8
1526726828
L.Thrp.Time.DL.QCI.9
138
eNodeB
Performance Counter Reference
Description
The counters measure the transmit duration of downlink PDCP SDUs for services with a specific
QCI ranging from 1 to 9 in a cell.
Measurement Point
The transmit duration of downlink PDCP SDUs for services with a specific QCI ranging from
1 to 9 is sampled per millisecond. If there is downlink data transmission within this millisecond,
the sampling result of the corresponding counter is 1. At the end of a measurement period, the
sum of these sampling results is used as the value of the corresponding counter.
Formula
None
Unit
ms
Related Features
Counter Name
Feature ID
Feature Name
L.Thrp.Time.DL
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.Thrp.Time.DL.QCI.1
L.Thrp.Time.DL.QCI.2
L.Thrp.Time.DL.QCI.3
L.Thrp.Time.DL.QCI.4
Issue 06 (2011-09-30)
139
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.Thrp.Time.DL.QCI.5
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.Thrp.Time.DL.QCI.6
L.Thrp.Time.DL.QCI.7
L.Thrp.Time.DL.QCI.8
L.Thrp.Time.DL.QCI.9
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526728260
L.Thrp.Time.UL
1526726777
L.Thrp.Time.UL.QCI.1
1526726780
L.Thrp.Time.UL.QCI.2
1526726783
L.Thrp.Time.UL.QCI.3
1526726786
L.Thrp.Time.UL.QCI.4
140
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1526726789
L.Thrp.Time.UL.QCI.5
1526726792
L.Thrp.Time.UL.QCI.6
1526726795
L.Thrp.Time.UL.QCI.7
1526726798
L.Thrp.Time.UL.QCI.8
1526726801
L.Thrp.Time.UL.QCI.9
Description
The counters measure the receive duration of uplink PDCP SDUs for each service with a specific
QCI ranging from 1 to 9 in a cell.
Measurement Point
The uplink PDCP SDU transmission for each service with a specific QCI ranging from 1 to 9
in a cell is sampled per millisecond. If there is uplink data transmission within this millisecond,
the sampling result of the corresponding counter is 1. At the end of a measurement period, the
sum of these sampling results is used as the value of the corresponding counter.
Formula
None
Unit
ms
Related Features
Counter Name
Feature ID
Feature Name
L.Thrp.Time.UL
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.Thrp.Time.UL.QCI.1
Issue 06 (2011-09-30)
141
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.Thrp.Time.UL.QCI.2
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.Thrp.Time.UL.QCI.3
L.Thrp.Time.UL.QCI.4
L.Thrp.Time.UL.QCI.5
L.Thrp.Time.UL.QCI.6
L.Thrp.Time.UL.QCI.7
L.Thrp.Time.UL.QCI.8
L.Thrp.Time.UL.QCI.9
Issue 06 (2011-09-30)
142
eNodeB
Performance Counter Reference
Counter Name
Description
1526728232
L.Thrp.Time.Cell.DL
Description
The counter measures the total duration of downlink data transmission in a cell.
Measurement Point
The duration of downlink data transmission in a cell is sampled per second. If there is downlink
data transmission within this second, the sampling result is 1. At the end of a measurement
period, the sum of these sampling results is used as the value of the counter. A deviation of one
sampling period may be caused in the sampling timer when the timer performs time
synchronization. As a result, a deviation of one sampling period will also be generated in the
value of the counter, which affects the values of the KPIs that are calculated by using the counter.
The effects vary depending on the deviation in the value of the counter and calculation formulas
for the KPIs.
Formula
None
Unit
s
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.Thrp.Time.Cell.DL
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
143
eNodeB
Performance Counter Reference
Counter Name
Description
1526728233
L.Thrp.Time.Cell.UL
Description
The counter measures the total duration of uplink data transmission in a cell.
Measurement Point
The duration of uplink data transmission in a cell is sampled per second. If there is uplink data
transmission within this second, the sampling result is 1. At the end of a measurement period,
the sum of these sampling results is used as the value of the counter. A deviation of one sampling
period may be caused in the sampling timer when the timer performs time synchronization. As
a result, a deviation of one sampling period will also be generated in the value of the counter,
which affects the values of the KPIs that are calculated by using the counter. The effects vary
depending on the deviation in the value of the counter and calculation formulas for the KPIs.
Formula
None
Unit
s
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.Thrp.Time.Cell.UL
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
144
eNodeB
Performance Counter Reference
1.1.11.11 Duration of Data Transmission for Services with a Specific QCI in a Cell
Counter
Counter ID
Counter Name
Description
1526728234
L.ERAB.SessionTime.QCI1
1526728235
L.ERAB.SessionTime.QCI2
1526728236
L.ERAB.SessionTime.QCI3
1526728237
L.ERAB.SessionTime.QCI4
1526728238
L.ERAB.SessionTime.QCI5
1526728239
L.ERAB.SessionTime.QCI6
1526728240
L.ERAB.SessionTime.QCI7
1526728241
L.ERAB.SessionTime.QCI8
1526728242
L.ERAB.SessionTime.QCI9
Description
The counters measure the duration of data transmission for each service with a specific QCI
ranging from 1 to 9 in a cell.
Measurement Point
The duration of data transmission in a cell is sampled per second. If there is uplink or downlink
data transmission within this second, the sampling result is 1. At the end of a measurement
period, the sum of these sampling results is used as the value of the corresponding counter
according to the QCI. A deviation of one sampling period may be caused in the sampling timer
when the timer performs time synchronization. As a result, a deviation of one sampling period
will also be generated in the value of the corresponding counter, which affects the values of the
KPIs that are calculated by using the counter. The effects vary depending on the deviation in the
value of the counter and calculation formulas for the KPIs.
Formula
None
Issue 06 (2011-09-30)
145
eNodeB
Performance Counter Reference
Unit
s
Related Features
Counter Name
Feature ID
Feature Name
L.ERAB.SessionTime.QCI1
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.ERAB.SessionTime.QCI2
L.ERAB.SessionTime.QCI3
L.ERAB.SessionTime.QCI4
L.ERAB.SessionTime.QCI5
L.ERAB.SessionTime.QCI6
L.ERAB.SessionTime.QCI7
L.ERAB.SessionTime.QCI8
Issue 06 (2011-09-30)
146
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ERAB.SessionTime.QCI9
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
Counter Name
Description
1526728243
L.E-RAB.SessionTime.UE
Description
The counter measures the total duration of UE data transmission in a cell.
Measurement Point
The duration of UE data transmission in a cell is sampled per second. If there is uplink or
downlink data transmission for a UE within the second, the counter is incremented by one
second. The sum of these sampling results for all UEs is used as the sampling result. At the end
of a measurement period, the sum of these sampling results is used as the value of the counter.
A deviation of one sampling period may be caused in the sampling timer when the timer performs
time synchronization. As a result, a deviation of one sampling period will also be generated in
the value of the counter, which affects the values of the KPIs that are calculated by using the
counter. The effects vary depending on the deviation in the value of the counter and calculation
formulas for the KPIs.
Formula
None
Unit
s
Issue 06 (2011-09-30)
147
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.ERAB.SessionTime.UE
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
Counter
The following table describes the counters contained in the "PDCP Measurement (Cell)
(Traffic.PDCP.Cell)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526726
833
L.PDCP.Tx.Disc.T
rf.SDU.QCI.1
Earlier than
V100R003C00
1526726
839
L.PDCP.Tx.Disc.T
rf.SDU.QCI.2
Earlier than
V100R003C00
1526726
845
L.PDCP.Tx.Disc.T
rf.SDU.QCI.3
Earlier than
V100R003C00
1526726
851
L.PDCP.Tx.Disc.T
rf.SDU.QCI.4
Earlier than
V100R003C00
148
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526726
857
L.PDCP.Tx.Disc.T
rf.SDU.QCI.5
Earlier than
V100R003C00
1526726
863
L.PDCP.Tx.Disc.T
rf.SDU.QCI.6
Earlier than
V100R003C00
1526726
869
L.PDCP.Tx.Disc.T
rf.SDU.QCI.7
Earlier than
V100R003C00
1526726
875
L.PDCP.Tx.Disc.T
rf.SDU.QCI.8
Earlier than
V100R003C00
1526726
881
L.PDCP.Tx.Disc.T
rf.SDU.QCI.9
Earlier than
V100R003C00
1526727
349
L.PDCP.DL.RoHC
.HdrCompRatio
Earlier than
V100R003C00
1526727
350
L.PDCP.DL.RoHC
.PktCompRatio
Earlier than
V100R003C00
1526727
351
L.PDCP.UL.RoHC
.FailDecompRatio
Earlier than
V100R003C00
1526727
889
L.PDCP.Tx.TotRev
.Trf.SDU.QCI.1
V100R003C00
1526727
891
L.PDCP.Tx.TotRev
.Trf.SDU.QCI.2
V100R003C00
1526727
893
L.PDCP.Tx.TotRev
.Trf.SDU.QCI.3
V100R003C00
1526727
895
L.PDCP.Tx.TotRev
.Trf.SDU.QCI.4
V100R003C00
149
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1526727
897
L.PDCP.Tx.TotRev
.Trf.SDU.QCI.5
V100R003C00
1526727
899
L.PDCP.Tx.TotRev
.Trf.SDU.QCI.6
V100R003C00
1526727
901
L.PDCP.Tx.TotRev
.Trf.SDU.QCI.7
V100R003C00
1526727
903
L.PDCP.Tx.TotRev
.Trf.SDU.QCI.8
V100R003C00
1526727
905
L.PDCP.Tx.TotRev
.Trf.SDU.QCI.9
V100R003C00
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526726833
L.PDCP.Tx.Disc.Trf.SDU.Q
CI.1
1526726839
L.PDCP.Tx.Disc.Trf.SDU.Q
CI.2
1526726845
L.PDCP.Tx.Disc.Trf.SDU.Q
CI.3
1526726851
L.PDCP.Tx.Disc.Trf.SDU.Q
CI.4
1526726857
L.PDCP.Tx.Disc.Trf.SDU.Q
CI.5
1526726863
L.PDCP.Tx.Disc.Trf.SDU.Q
CI.6
150
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1526726869
L.PDCP.Tx.Disc.Trf.SDU.Q
CI.7
1526726875
L.PDCP.Tx.Disc.Trf.SDU.Q
CI.8
1526726881
L.PDCP.Tx.Disc.Trf.SDU.Q
CI.9
Description
The counters measure the number of discarded downlink traffic SDUs transmitted from the
PDCP layer to the RLC layer for each service with a specific QCI ranging from 1 to 9 in a cell.
Measurement Point
The number of discarded downlink traffic SDUs transmitted from the PDCP layer to the RLC
layer for each service with a specific QCI ranging from 1 to 9 is sampled in a cell. At the end of
a measurement period, the sum of these sampling results is used as the value of the corresponding
counter.
Formula
None
Unit
packet
Related Features
Counter Name
Feature ID
Feature Name
L.PDCP.Tx.Disc.Trf.SD
U.QCI.1
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.PDCP.Tx.Disc.Trf.SD
U.QCI.2
Issue 06 (2011-09-30)
151
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.PDCP.Tx.Disc.Trf.SD
U.QCI.3
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.PDCP.Tx.Disc.Trf.SD
U.QCI.4
L.PDCP.Tx.Disc.Trf.SD
U.QCI.5
L.PDCP.Tx.Disc.Trf.SD
U.QCI.6
L.PDCP.Tx.Disc.Trf.SD
U.QCI.7
L.PDCP.Tx.Disc.Trf.SD
U.QCI.8
L.PDCP.Tx.Disc.Trf.SD
U.QCI.9
1.1.12.2 Compression Rate of Headers of Downlink PDCP SDUs After the ROHC
Counter
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727349
L.PDCP.DL.RoHC.HdrCom
pRatio
152
eNodeB
Performance Counter Reference
Description
The counter measures the compression rate of headers of all downlink PDCP SDUs after the
Robust Header Compression (ROHC) in a cell. Only the PDCP SDUs whose headers are
compressed by the ROHC algorithm are measured.
Measurement Point
When ROHC is used to compress the headers of downlink PDCP SDUs to be transmitted in a
cell, the total sizes of the headers before and after compression are calculated. The compression
rate is calculated through the following formula.
Formula
Compression rate of headers of all downlink PDCP SDUs after the ROHC = 100 x Total size of
headers of downlink PDCP SDUs after the ROHC/Total size of headers of downlink PDCP
SDUs before the ROHC
Unit
%
Related Features
Counter Name
Feature ID
Feature Name
L.PDCP.DL.RoHC.HdrC
ompRatio
LOFD-001017
TDLOFD-001017
Counter Name
Description
1526727350
L.PDCP.DL.RoHC.PktCom
pRatio
Description
The counter measures the compression rate of headers and payloads of all downlink PDCP SDUs
after the ROHC in a cell. Only the PDCP SDUs that are compressed by the ROHC algorithm
are measured.
Issue 06 (2011-09-30)
153
eNodeB
Performance Counter Reference
Measurement Point
When ROHC is used to compress the headers of downlink PDCP SDUs to be transmitted in a
cell, the total sizes of the PDCP SDUs before and after compression are calculated. The
compression rate is calculated through the following formula.
Formula
Compression rate of all downlink PDCP SDUs after the ROHC = 100 x Total size of downlink
PDCP SDUs after the ROHC/Total size of downlink PDCP SDUs before the ROHC
Unit
%
Related Features
Counter Name
Feature ID
Feature Name
L.PDCP.DL.RoHC.PktC
ompRatio
LOFD-001017
TDLOFD-001017
1.1.12.4 Decompression Failure Rate of Uplink PDCP SDUs After the ROHC
Counter
Counter ID
Counter Name
Description
1526727351
L.PDCP.UL.RoHC.FailDecompRatio
Description
The counter measures the decompression failure rate of all uplink PDCP SDUs after the ROHC
in a cell. This rate is based on the number of PDCP SDUs. Only the PDCP SDUs that are
compressed by the ROHC algorithm are measured.
Measurement Point
When the received uplink PDCP SDUs need to be decompressed in a cell, the number of PDCP
SDUs that fail to be decompressed and the number of uplink PDCP SDUs to be decompressed
are calculated respectively. The decompression failure rate is calculated through the following
formula.
Issue 06 (2011-09-30)
154
eNodeB
Performance Counter Reference
Formula
Decompression failure rate of uplink PDCP SDUs after the ROHC = 100 x Number of uplink
PDCP SDUs that fail to be decompressed after the ROHC/Number of uplink PDCP SDUs to be
decompressed after the ROHC
Unit
%
Related Features
Counter Name
Feature ID
Feature Name
L.PDCP.UL.RoHC.FailDecompRatio
LOFD-001017
TDLOFD-001017
1.1.12.5 Number of Transmitted Downlink PDCP SDUs for DRB Services in a Cell
Counter
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727889
L.PDCP.Tx.TotRev.Trf.SD
U.QCI.1
1526727891
L.PDCP.Tx.TotRev.Trf.SD
U.QCI.2
1526727893
L.PDCP.Tx.TotRev.Trf.SD
U.QCI.3
1526727895
L.PDCP.Tx.TotRev.Trf.SD
U.QCI.4
1526727897
L.PDCP.Tx.TotRev.Trf.SD
U.QCI.5
1526727899
L.PDCP.Tx.TotRev.Trf.SD
U.QCI.6
1526727901
L.PDCP.Tx.TotRev.Trf.SD
U.QCI.7
155
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1526727903
L.PDCP.Tx.TotRev.Trf.SD
U.QCI.8
1526727905
L.PDCP.Tx.TotRev.Trf.SD
U.QCI.9
Description
The counters measure the number of transmitted downlink PDCP SDUs for DRB services with
a specific QCI ranging from 1 to 9 in a cell.
Measurement Point
The number of transmitted downlink PDCP SDUs with a specific QCI ranging from 1 to 9 is
sampled per second. At the end of a measurement period, the sum of these sampling results is
used as the value of the corresponding counter.
Formula
None
Unit
packet
Related Features
Counter Name
Feature ID
Feature Name
L.PDCP.Tx.TotRev.Trf.S
DU.QCI.1
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.PDCP.Tx.TotRev.Trf.S
DU.QCI.2
L.PDCP.Tx.TotRev.Trf.S
DU.QCI.3
Issue 06 (2011-09-30)
156
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.PDCP.Tx.TotRev.Trf.S
DU.QCI.4
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.PDCP.Tx.TotRev.Trf.S
DU.QCI.5
L.PDCP.Tx.TotRev.Trf.S
DU.QCI.6
L.PDCP.Tx.TotRev.Trf.S
DU.QCI.7
L.PDCP.Tx.TotRev.Trf.S
DU.QCI.8
L.PDCP.Tx.TotRev.Trf.S
DU.QCI.9
Counter
The following table describes the counters contained in the "Paging Measurement (Cell)
(Paging.Cell)" measurement unit:
Issue 06 (2011-09-30)
157
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1526726
884
L.Paging.S1.Rx
Earlier than
V100R003C00
1526726
885
L.Paging.UU.Att
Earlier than
V100R003C00
1526726
886
L.Paging.UU.Succ
Earlier than
V100R003C00
1526727
212
L.Paging.Dis.Num
Earlier than
V100R003C00
Counter Name
Description
1526726884
L.Paging.S1.Rx
Description
The counter measures the number of paging messages received by the eNodeB over the S1
interface in a cell.
Measurement Point
As shown in point A in Figure 1-69, the counter is incremented by 1 each time the eNodeB
receives a paging message from the MME and at least a tracking area identifier (TAI) of the cell
is contained in the TAI list in the paging message.
Issue 06 (2011-09-30)
158
eNodeB
Performance Counter Reference
Figure 1-69
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.Paging.S1.Rx
LBFD-002011
Paging
TDLBFD-002011
Paging
Counter Name
Description
1526726885
L.Paging.UU.Att
Description
The counter measures the number of paging attempts to the UE over the Uu interface in a cell,
including the number of retransmitted paging attempts.
Issue 06 (2011-09-30)
159
eNodeB
Performance Counter Reference
Measurement Point
As shown in point A in Figure 1-70, the counter is incremented by 1 each time the eNodeB
sends a paging message to the UE over the Uu interface. The paging message is sent twice to
the UE to ensure that the message is received by the UE. Each paging message contains a
maximum of 16 pieces of UE paging information.
Figure 1-70
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.Paging.UU.Att
LBFD-002011
Paging
TDLBFD-002011
Paging
160
eNodeB
Performance Counter Reference
Counter Name
Description
1526726886
L.Paging.UU.Succ
Description
The counter measures the number of successful paging responses from the UE in a cell.
Measurement Point
As shown in point A in Figure 1-71, the counter is incremented by 1 each time the eNodeB
receives an RRC Connection Request message from the UE and the Establishment Cause
information element of the message is mt-Access.
Figure 1-71
Formula
None
Unit
times
Issue 06 (2011-09-30)
161
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.Paging.UU.Succ
LBFD-002011
Paging
TDLBFD-002011
Paging
1.1.13.4 Number of Discarded Paging Messages from the MME to UEs in a Cell
Counter
Counter ID
Counter Name
Description
1526727212
L.Paging.Dis.Num
Description
The counter measures the number of paging messages discarded by the eNodeB in a cell. The
messages are sent from the MME to UEs in the cell.
Measurement Point
The counter is incremented by 1 each time the eNodeB discards a paging message in a cell.
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.Paging.Dis.Num
LBFD-002011
Paging
TDLBFD-002011
Paging
162
eNodeB
Performance Counter Reference
times the Random Access Response message is sent, and number of times the Contention
Resolution message is sent after the contention preamble in group A is received in the two RA
procedures. It is used to analyze the RA load and success rate.
Counter
The following table describes the counters contained in the "RA Measurement (Cell) (RA.Cell)"
measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
215
L.RA.GrpA.Att
Earlier than
V100R003C00
1526727
218
L.RA.GrpB.Att
Earlier than
V100R003C00
1526727
216
L.RA.GrpA.Resp
Earlier than
V100R003C00
1526727
219
L.RA.GrpB.Resp
Earlier than
V100R003C00
1526727
217
L.RA.GrpA.ContResolution
Earlier than
V100R003C00
1526727
220
L.RA.GrpB.ContResolution
Earlier than
V100R003C00
1526727
221
L.RA.Dedicate.Att
Earlier than
V100R003C00
1526727
222
L.RA.Dedicate.HO.
Att
Earlier than
V100R003C00
1526727
223
L.RA.Dedicate.Res
p
Earlier than
V100R003C00
163
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1526727
224
L.RA.Dedicate.HO.
Resp
Earlier than
V100R003C00
1526727
225
L.RA.Dedicate.HO.
Msg3Rcv
Earlier than
V100R003C00
Counter Name
Description
1526727215
L.RA.GrpA.Att
1526727218
L.RA.GrpB.Att
Description
Contention preambles may belong to either group A or group B. Contention preambles in group
A are mandatory, and contention preambles in group B are optional. The number of contention
preambles that can be allocated to each cell and the grouping of preambles are set by the eNodeB,
and the information is broadcast on the BCH. In the UE-initiated contention-based RA
procedure, the eNodeB determines which group a preamble belongs to based on the settings of
groups A and B as well as the radio environments of the UE. Then, the UE randomly selects a
preamble and transmit it. The counters measure the number of times the contention preambles
in group A or B are received. They indicate the reception load of contention preambles.
Measurement Point
As shown in point A in Figure 1-72, the corresponding counter is incremented by 1 each time
the eNodeB receives a contention preamble:
The L.RA.GrpA.Att counter is incremented by 1 when the preamble belongs to group A.
The L.RA.GrpB.Att counter is incremented by 1 when the preamble belongs to group B.
Issue 06 (2011-09-30)
164
eNodeB
Performance Counter Reference
Figure 1-72
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.RA.GrpA.Att
LBFD-002010
TDLBFD-002010
LBFD-002010
TDLBFD-002010
L.RA.GrpB.Att
Issue 06 (2011-09-30)
165
eNodeB
Performance Counter Reference
1.1.14.2 Number of Times the Random Access Response Message is Sent After the
Contention Preamble is Received
Counter
Counter ID
Counter Name
Description
1526727216
L.RA.GrpA.Resp
1526727219
L.RA.GrpB.Resp
Description
After receiving a contention preamble, the eNodeB sends a Random Access Response (RAR)
message to the UE if system resources are sufficient. The counters measure the number of times
the Random Access Response message is sent after the contention preamble in group A or B is
received. They indicate the eNodeB's response to the contention preamble.
Measurement Point
As shown in point B in Figure 1-73, the corresponding counter is increment by 1 each time the
eNodeB sends a Random Access Response message to the UE after receiving a contention
preamble:
The L.RA.GrpA.Resp counter is incremented by 1 when the preamble belongs to group A.
The L.RA.Grpb.Resp counter is incremented by 1 when the preamble belongs to group B.
Issue 06 (2011-09-30)
166
eNodeB
Performance Counter Reference
Figure 1-73
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.RA.GrpA.Resp
LBFD-002010
TDLBFD-002010
LBFD-002010
TDLBFD-002010
L.RA.GrpB.Resp
Issue 06 (2011-09-30)
167
eNodeB
Performance Counter Reference
1.1.14.3 Number of Times the Contention Resolution Message is Sent After the
Contention Preamble is Received
Counter
Counter ID
Counter Name
Description
1526727217
L.RA.GrpA.ContResolution
1526727220
L.RA.GrpB.ContResolution
Description
The counters measure the number of times the Contention Resolution message is sent after the
contention preamble in group A or group B is received. They indicate the success rate of the
contention RA procedure.
Measurement Point
As shown in point C in Figure 1-74, the corresponding counter is incremented by 1 each time
the eNodeB sends a Contention Resolution message to the UE after receiving a preamble:
The L.RA.GrpA.ContResolution counter is incremented by 1 when the contention preamble
belongs to group A.
The L.RA.GrpB.ContResolution counter is incremented by 1 when the contention preamble
belongs to group B.
Issue 06 (2011-09-30)
168
eNodeB
Performance Counter Reference
Figure 1-74
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.RA.GrpA.ContResolution
LBFD-002010
TDLBFD-002010
L.RA.GrpB.ContResolution
LBFD-002010
TDLBFD-002010
169
eNodeB
Performance Counter Reference
Counter Name
Description
1526727221
L.RA.Dedicate.Att
1526727222
L.RA.Dedicate.HO.Att
Description
The non-contention-based RA procedure is used in a handover or recovery of uplink
synchronization. The preamble used in the RA procedure is the non-contention-based preamble,
alias dedicated preamble. It is allocated by the eNodeB. In a handover, the eNodeB sends the
preamble to the UE with the RRC signaling message. In the recovery of uplink synchronization,
the eNodeB sends the preamble to the UE with the DCI on the PDCCH. The counters measure
the number of times the the non-contention-based preamble is received in a handover or recovery
of uplink synchronization in a cell.
Measurement Point
As shown in point B in Figure 1-75, the corresponding counter is incremented by 1 each time
the eNodeB receives a non-contention-based preamble:
The L.RA.Dedicate.Att counter is incremented by 1.
The L.RA.Dedicate.HO.Att counter is incremented by 1 in a handover.
Issue 06 (2011-09-30)
170
eNodeB
Performance Counter Reference
Figure 1-75
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.RA.Dedicate.Att
LBFD-002010
TDLBFD-002010
LBFD-002010
TDLBFD-002010
L.RA.Dedicate.HO.Att
Issue 06 (2011-09-30)
171
eNodeB
Performance Counter Reference
1.1.14.5 Number of Times the Random Access Response Message is Sent After the
non-contention-based Preamble is Received
Counter
Counter ID
Counter Name
Description
1526727223
L.RA.Dedicate.Resp
1526727224
L.RA.Dedicate.HO.Resp
Description
After receiving the non-contention-based preamble, the eNodeB sends a Random Access
Response (RAR) message to the UE if system resources are sufficient. The counters measure
the number of times the Random Access Response message is sent due to a handover or uplink
synchronization recovery. They indicate the eNodeB's response to the non-contention-based
preamble.
Measurement Point
As shown in point C in Figure 1-76, the corresponding counter is increment by 1 each time the
eNodeB sends a Random Access Response message to the UE after receiving a non-contentionbased preamble:
The L.RA.Dedicate.HO.Resp counter is incremented by 1 in a handover.
The L.RA.Dedicate.Resp counter is incremented by 1 in the recovery of uplink synchronization.
Issue 06 (2011-09-30)
172
eNodeB
Performance Counter Reference
Figure 1-76
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.RA.Dedicate.Resp
LBFD-002010
TDLBFD-002010
LBFD-002010
TDLBFD-002010
L.RA.Dedicate.HO.Resp
Issue 06 (2011-09-30)
173
eNodeB
Performance Counter Reference
1.1.14.6 Number of Times the Msg3 Response Messages Are Received in the
Handover-Triggered Non-Contention-based RA Procedure
Counter
Counter ID
Counter Name
Description
1526727225
L.RA.Dedicate.HO.Msg3Rc
v
Description
The counter measures the number of times the UE Msg3 Response messages are received in the
handover-triggered non-contention RA procedure. It is used to evaluate the success rate of RA
procedures during handover.
Measurement Point
As shown in point D in Figure 1-77, in the handover-triggered non-contention RA procedure,
the counter is incremented by 1 each time the eNodeB receives a UE Msg3 Response message
from the UE.
Issue 06 (2011-09-30)
174
eNodeB
Performance Counter Reference
Figure 1-77
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.RA.Dedicate.HO.Msg3
Rcv
LBFD-002010
TDLBFD-002010
175
eNodeB
Performance Counter Reference
Description
The ChMeas.Pwr.Cell measurement unit measures the power in a cell to analyze the overall
quality of the downlink channel.
Counter
The following table describes the counters contained in the "Channel Quality Measurement
(Cell) (ChMeas.Pwr.Cell)" measurement unit:
Counte
r ID
Counter Name
Description
Original Release
1526727
388
L.DLPwr.Max
Earlier than
V100R003C00
1526727
389
L.DLPwr.Avg
Earlier than
V100R003C00
Counter Name
Description
1526727388
L.DLPwr.Max
1526727389
L.DLPwr.Avg
Description
Downlink transmit power is allocated dynamically by the eNodeB at the MAC layer within each
TTI. The transmit power of only the PDSCH is involved. In TDD mode, if the TTI at a sampling
point is an uplink subframe, the measurement is sampled at the closest next downlink subframe.
The counters measure the maximum and average downlink transmit power respectively. They
are used to analyze the usage of PDSCH power.
Measurement Point
The downlink transmit power is sampled per second. At the end of a measurement period, the
maximum or average of these sampling results is used as the value of the corresponding counter.
Formula
None
Unit
dBm
Issue 06 (2011-09-30)
176
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.DLPwr.Max
LBFD-00202001
LBFD-002025
Basic Scheduling
TDLBFD-00202001
TDLBFD-002025
Basic Scheduling
LBFD-00202001
LBFD-002025
Basic Scheduling
TDLBFD-00202001
TDLBFD-002025
Basic Scheduling
L.DLPwr.Avg
Counter
The following table describes the counters contained in the "MIMO Measurement (Cell)
(ChMeas.MIMO.Cell)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
391
L.ChMeas.MIMO.
PRB.CL.Rank1
Earlier than
V100R003C00
1526727
392
L.ChMeas.MIMO.
PRB.CL.Rank2
Earlier than
V100R003C00
1526727
393
L.ChMeas.MIMO.
PRB.OL.Rank1
Earlier than
V100R003C00
1526727
394
L.ChMeas.MIMO.
PRB.OL.Rank2
Earlier than
V100R003C00
1526728
174
L.ChMeas.MIMO.
PRB.CL.Rank3
V100R003C00
1526728
175
L.ChMeas.MIMO.
PRB.CL.Rank4
V100R003C00
1526728
176
L.ChMeas.MIMO.
PRB.OL.Rank3
V100R003C00
177
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1526728
177
L.ChMeas.MIMO.
PRB.OL.Rank4
V100R003C00
Counter Name
Description
1526727391
L.ChMeas.MIMO.PRB.CL.
Rank1
1526727392
L.ChMeas.MIMO.PRB.CL.
Rank2
1526727393
L.ChMeas.MIMO.PRB.OL.
Rank1
1526727394
L.ChMeas.MIMO.PRB.OL.
Rank2
1526728174
L.ChMeas.MIMO.PRB.CL.
Rank3
1526728175
L.ChMeas.MIMO.PRB.CL.
Rank4
1526728176
L.ChMeas.MIMO.PRB.OL.
Rank3
1526728177
L.ChMeas.MIMO.PRB.OL.
Rank4
Description
Downlink MIMO are classified into the following eight modes: open-loop modes with the rank
ranging from 1 to 4 and closed-loop modes with the rank ranging from 1 to 4. The counters
measure the number of used downlink PRBs in different MIMO modes.
Measurement Point
The number of used downlink PRBs in each MIMO mode is sampled per second. At the end of
a measurement period, the sum of these sampling results is used as the value of the corresponding
counter.A deviation of one sampling period may be caused in the sampling timer when the timer
performs time synchronization. As a result, a deviation of one sampling period will also be
generated in the value of this counter, which affects the values of the KPIs that are calculated
by using this counter. The effects vary depending on the deviation in the value of this counter
and calculation formulas for the KPIs.
Issue 06 (2011-09-30)
178
eNodeB
Performance Counter Reference
Formula
None
Unit
None
Related Features
Counter Name
Feature ID
Feature Name
L.ChMeas.MIMO.PRB.
CL.Rank1
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.ChMeas.MIMO.PRB.
CL.Rank2
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.ChMeas.MIMO.PRB.
OL.Rank1
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.ChMeas.MIMO.PRB.
OL.Rank2
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.ChMeas.MIMO.PRB.
CL.Rank3
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.ChMeas.MIMO.PRB.
CL.Rank4
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.ChMeas.MIMO.PRB.
OL.Rank3
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.ChMeas.MIMO.PRB.
OL.Rank4
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
Counter
The following table describes the counters contained in the "CQI Measurement (Cell)
(ChMeas.CQI.Cell)" measurement unit:
Issue 06 (2011-09-30)
179
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
396
L.ChMeas.CQI.DL
.0
Earlier than
V100R003C00
1526727
397
L.ChMeas.CQI.DL
.1
Earlier than
V100R003C00
1526727
398
L.ChMeas.CQI.DL
.2
Earlier than
V100R003C00
1526727
399
L.ChMeas.CQI.DL
.3
Earlier than
V100R003C00
1526727
400
L.ChMeas.CQI.DL
.4
Earlier than
V100R003C00
1526727
401
L.ChMeas.CQI.DL
.5
Earlier than
V100R003C00
1526727
402
L.ChMeas.CQI.DL
.6
Earlier than
V100R003C00
1526727
403
L.ChMeas.CQI.DL
.7
Earlier than
V100R003C00
1526727
404
L.ChMeas.CQI.DL
.8
Earlier than
V100R003C00
1526727
405
L.ChMeas.CQI.DL
.9
Earlier than
V100R003C00
1526727
406
L.ChMeas.CQI.DL
.10
Earlier than
V100R003C00
1526727
407
L.ChMeas.CQI.DL
.11
Earlier than
V100R003C00
1526727
408
L.ChMeas.CQI.DL
.12
Earlier than
V100R003C00
1526727
409
L.ChMeas.CQI.DL
.13
Earlier than
V100R003C00
1526727
410
L.ChMeas.CQI.DL
.14
Earlier than
V100R003C00
1526727
411
L.ChMeas.CQI.DL
.15
Earlier than
V100R003C00
180
eNodeB
Performance Counter Reference
Counter Name
Description
1526727396
L.ChMeas.CQI.DL.0
1526727397
L.ChMeas.CQI.DL.1
1526727398
L.ChMeas.CQI.DL.2
1526727399
L.ChMeas.CQI.DL.3
1526727400
L.ChMeas.CQI.DL.4
1526727401
L.ChMeas.CQI.DL.5
1526727402
L.ChMeas.CQI.DL.6
1526727403
L.ChMeas.CQI.DL.7
1526727404
L.ChMeas.CQI.DL.8
1526727405
L.ChMeas.CQI.DL.9
1526727406
L.ChMeas.CQI.DL.10
1526727407
L.ChMeas.CQI.DL.11
1526727408
L.ChMeas.CQI.DL.12
1526727409
L.ChMeas.CQI.DL.13
1526727410
L.ChMeas.CQI.DL.14
1526727411
L.ChMeas.CQI.DL.15
Description
Channel Quality Indicator (CQI) is used to evaluate the quality of the downlink channel. The
UE sends the evaluation result to the eNodeB through the uplink channel, which is used as the
input of MAC scheduling of the eNodeB. The counters measure the number of reports with a
different CQI index ranging from 0 to 15 in a cell. It is used to evaluate the overall quality of
the downlink channel.
Measurement Point
The corresponding counter is incremented by 1 based on the CQI index each time the eNodeB
receives a wideband CQI report from the UE,A deviation of one sampling period may be caused
in the sampling timer when the timer performs time synchronization. As a result, a deviation of
one sampling period will also be generated in the value of this counter, which affects the values
of the KPIs that are calculated by using this counter. The effects vary depending on the deviation
in the value of this counter and calculation formulas for the KPIs.
Issue 06 (2011-09-30)
181
eNodeB
Performance Counter Reference
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.ChMeas.CQI.DL.0
LBFD-002016
LBFD-002025
TDLBFD-002016
Basic Scheduling
TDLBFD-002025
L.ChMeas.CQI.DL.1
LBFD-002016
LBFD-002025
TDLBFD-002016
Basic Scheduling
TDLBFD-002025
L.ChMeas.CQI.DL.2
LBFD-002016
LBFD-002025
TDLBFD-002016
Basic Scheduling
TDLBFD-002025
L.ChMeas.CQI.DL.3
LBFD-002016
LBFD-002025
TDLBFD-002016
Basic Scheduling
TDLBFD-002025
L.ChMeas.CQI.DL.4
LBFD-002016
LBFD-002025
TDLBFD-002016
Basic Scheduling
TDLBFD-002025
Issue 06 (2011-09-30)
182
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ChMeas.CQI.DL.5
LBFD-002016
LBFD-002025
TDLBFD-002016
Basic Scheduling
TDLBFD-002025
L.ChMeas.CQI.DL.6
LBFD-002016
LBFD-002025
TDLBFD-002016
Basic Scheduling
TDLBFD-002025
L.ChMeas.CQI.DL.7
LBFD-002016
LBFD-002025
TDLBFD-002016
Basic Scheduling
TDLBFD-002025
L.ChMeas.CQI.DL.8
LBFD-002016
LBFD-002025
TDLBFD-002016
Basic Scheduling
TDLBFD-002025
L.ChMeas.CQI.DL.9
LBFD-002016
LBFD-002025
TDLBFD-002016
Basic Scheduling
TDLBFD-002025
L.ChMeas.CQI.DL.10
LBFD-002016
LBFD-002025
TDLBFD-002016
Basic Scheduling
TDLBFD-002025
Issue 06 (2011-09-30)
183
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ChMeas.CQI.DL.11
LBFD-002016
LBFD-002025
TDLBFD-002016
Basic Scheduling
TDLBFD-002025
L.ChMeas.CQI.DL.12
LBFD-002016
LBFD-002025
TDLBFD-002016
Basic Scheduling
TDLBFD-002025
L.ChMeas.CQI.DL.13
LBFD-002016
LBFD-002025
TDLBFD-002016
Basic Scheduling
TDLBFD-002025
L.ChMeas.CQI.DL.14
LBFD-002016
LBFD-002025
TDLBFD-002016
Basic Scheduling
TDLBFD-002025
L.ChMeas.CQI.DL.15
LBFD-002016
LBFD-002025
TDLBFD-002016
Basic Scheduling
TDLBFD-002025
Issue 06 (2011-09-30)
184
eNodeB
Performance Counter Reference
Counter
The following table describes the counters contained in the "MCS Measurement (Cell)
(ChMeas.MCS.Cell)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
444
L.ChMeas.PDSCH.
MCS.0
Earlier than
V100R003C00
1526727
445
L.ChMeas.PDSCH.
MCS.1
Earlier than
V100R003C00
1526727
446
L.ChMeas.PDSCH.
MCS.2
Earlier than
V100R003C00
1526727
447
L.ChMeas.PDSCH.
MCS.3
Earlier than
V100R003C00
1526727
448
L.ChMeas.PDSCH.
MCS.4
Earlier than
V100R003C00
1526727
449
L.ChMeas.PDSCH.
MCS.5
Earlier than
V100R003C00
1526727
450
L.ChMeas.PDSCH.
MCS.6
Earlier than
V100R003C00
1526727
451
L.ChMeas.PDSCH.
MCS.7
Earlier than
V100R003C00
1526727
452
L.ChMeas.PDSCH.
MCS.8
Earlier than
V100R003C00
1526727
453
L.ChMeas.PDSCH.
MCS.9
Earlier than
V100R003C00
1526727
454
L.ChMeas.PDSCH.
MCS.10
Earlier than
V100R003C00
1526727
455
L.ChMeas.PDSCH.
MCS.11
Earlier than
V100R003C00
1526727
456
L.ChMeas.PDSCH.
MCS.12
Earlier than
V100R003C00
1526727
457
L.ChMeas.PDSCH.
MCS.13
Earlier than
V100R003C00
1526727
458
L.ChMeas.PDSCH.
MCS.14
Earlier than
V100R003C00
1526727
459
L.ChMeas.PDSCH.
MCS.15
Earlier than
V100R003C00
1526727
460
L.ChMeas.PDSCH.
MCS.16
Earlier than
V100R003C00
185
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
461
L.ChMeas.PDSCH.
MCS.17
Earlier than
V100R003C00
1526727
462
L.ChMeas.PDSCH.
MCS.18
Earlier than
V100R003C00
1526727
463
L.ChMeas.PDSCH.
MCS.19
Earlier than
V100R003C00
1526727
464
L.ChMeas.PDSCH.
MCS.20
Earlier than
V100R003C00
1526727
465
L.ChMeas.PDSCH.
MCS.21
Earlier than
V100R003C00
1526727
466
L.ChMeas.PDSCH.
MCS.22
Earlier than
V100R003C00
1526727
467
L.ChMeas.PDSCH.
MCS.23
Earlier than
V100R003C00
1526727
468
L.ChMeas.PDSCH.
MCS.24
Earlier than
V100R003C00
1526727
469
L.ChMeas.PDSCH.
MCS.25
Earlier than
V100R003C00
1526727
470
L.ChMeas.PDSCH.
MCS.26
Earlier than
V100R003C00
1526727
471
L.ChMeas.PDSCH.
MCS.27
Earlier than
V100R003C00
1526727
472
L.ChMeas.PDSCH.
MCS.28
Earlier than
V100R003C00
1526727
473
L.ChMeas.PDSCH.
MCS.29
Earlier than
V100R003C00
1526727
474
L.ChMeas.PDSCH.
MCS.30
Earlier than
V100R003C00
1526727
475
L.ChMeas.PDSCH.
MCS.31
Earlier than
V100R003C00
1526727
412
L.ChMeas.PUSCH.
MCS.0
Earlier than
V100R003C00
1526727
413
L.ChMeas.PUSCH.
MCS.1
Earlier than
V100R003C00
1526727
414
L.ChMeas.PUSCH.
MCS.2
Earlier than
V100R003C00
186
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
415
L.ChMeas.PUSCH.
MCS.3
Earlier than
V100R003C00
1526727
416
L.ChMeas.PUSCH.
MCS.4
Earlier than
V100R003C00
1526727
417
L.ChMeas.PUSCH.
MCS.5
Earlier than
V100R003C00
1526727
418
L.ChMeas.PUSCH.
MCS.6
Earlier than
V100R003C00
1526727
419
L.ChMeas.PUSCH.
MCS.7
Earlier than
V100R003C00
1526727
420
L.ChMeas.PUSCH.
MCS.8
Earlier than
V100R003C00
1526727
421
L.ChMeas.PUSCH.
MCS.9
Earlier than
V100R003C00
1526727
422
L.ChMeas.PUSCH.
MCS.10
Earlier than
V100R003C00
1526727
423
L.ChMeas.PUSCH.
MCS.11
Earlier than
V100R003C00
1526727
424
L.ChMeas.PUSCH.
MCS.12
Earlier than
V100R003C00
1526727
425
L.ChMeas.PUSCH.
MCS.13
Earlier than
V100R003C00
1526727
426
L.ChMeas.PUSCH.
MCS.14
Earlier than
V100R003C00
1526727
427
L.ChMeas.PUSCH.
MCS.15
Earlier than
V100R003C00
1526727
428
L.ChMeas.PUSCH.
MCS.16
Earlier than
V100R003C00
1526727
429
L.ChMeas.PUSCH.
MCS.17
Earlier than
V100R003C00
1526727
430
L.ChMeas.PUSCH.
MCS.18
Earlier than
V100R003C00
1526727
431
L.ChMeas.PUSCH.
MCS.19
Earlier than
V100R003C00
1526727
432
L.ChMeas.PUSCH.
MCS.20
Earlier than
V100R003C00
187
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1526727
433
L.ChMeas.PUSCH.
MCS.21
Earlier than
V100R003C00
1526727
434
L.ChMeas.PUSCH.
MCS.22
Earlier than
V100R003C00
1526727
435
L.ChMeas.PUSCH.
MCS.23
Earlier than
V100R003C00
1526727
436
L.ChMeas.PUSCH.
MCS.24
Earlier than
V100R003C00
1526727
437
L.ChMeas.PUSCH.
MCS.25
Earlier than
V100R003C00
1526727
438
L.ChMeas.PUSCH.
MCS.26
Earlier than
V100R003C00
1526727
439
L.ChMeas.PUSCH.
MCS.27
Earlier than
V100R003C00
1526727
440
L.ChMeas.PUSCH.
MCS.28
Earlier than
V100R003C00
1526727
441
L.ChMeas.PUSCH.
MCS.29
Earlier than
V100R003C00
1526727
442
L.ChMeas.PUSCH.
MCS.30
Earlier than
V100R003C00
1526727
443
L.ChMeas.PUSCH.
MCS.31
Earlier than
V100R003C00
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727444
L.ChMeas.PDSCH.MCS.0
1526727445
L.ChMeas.PDSCH.MCS.1
1526727446
L.ChMeas.PDSCH.MCS.2
1526727447
L.ChMeas.PDSCH.MCS.3
188
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727448
L.ChMeas.PDSCH.MCS.4
1526727449
L.ChMeas.PDSCH.MCS.5
1526727450
L.ChMeas.PDSCH.MCS.6
1526727451
L.ChMeas.PDSCH.MCS.7
1526727452
L.ChMeas.PDSCH.MCS.8
1526727453
L.ChMeas.PDSCH.MCS.9
1526727454
L.ChMeas.PDSCH.MCS.10
1526727455
L.ChMeas.PDSCH.MCS.11
1526727456
L.ChMeas.PDSCH.MCS.12
1526727457
L.ChMeas.PDSCH.MCS.13
1526727458
L.ChMeas.PDSCH.MCS.14
1526727459
L.ChMeas.PDSCH.MCS.15
1526727460
L.ChMeas.PDSCH.MCS.16
1526727461
L.ChMeas.PDSCH.MCS.17
1526727462
L.ChMeas.PDSCH.MCS.18
1526727463
L.ChMeas.PDSCH.MCS.19
1526727464
L.ChMeas.PDSCH.MCS.20
1526727465
L.ChMeas.PDSCH.MCS.21
1526727466
L.ChMeas.PDSCH.MCS.22
189
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1526727467
L.ChMeas.PDSCH.MCS.23
1526727468
L.ChMeas.PDSCH.MCS.24
1526727469
L.ChMeas.PDSCH.MCS.25
1526727470
L.ChMeas.PDSCH.MCS.26
1526727471
L.ChMeas.PDSCH.MCS.27
1526727472
L.ChMeas.PDSCH.MCS.28
1526727473
L.ChMeas.PDSCH.MCS.29
1526727474
L.ChMeas.PDSCH.MCS.30
1526727475
L.ChMeas.PDSCH.MCS.31
Description
The downlink MCS index is an output of downlink scheduling. Each index corresponds to a
unique modulation order and a TBS index. The counters measure the number of times each MCS
index ranging from 0 to 31 is scheduled in the downlink in a cell.
Measurement Point
The corresponding counter is incremented by 1 each time the eNodeB schedules an MCS index
for a UE in the downlink within a TTI. A deviation of one sampling period may be caused in
the sampling timer when the timer performs time synchronization. As a result, a deviation of
one sampling period will also be generated in the value of the corresponding counter, which
affects the values of the KPIs that are calculated by using the counter. The effects vary depending
on the deviation in the value of the counter and calculation formulas for the KPIs.
Formula
None
Unit
times
Issue 06 (2011-09-30)
190
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.ChMeas.PDSCH.MCS.
0
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
1
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
2
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
3
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
4
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
5
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
Issue 06 (2011-09-30)
191
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ChMeas.PDSCH.MCS.
6
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
7
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
8
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
9
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
10
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
11
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
Issue 06 (2011-09-30)
192
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ChMeas.PDSCH.MCS.
12
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
13
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
14
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
15
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
16
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
17
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
Issue 06 (2011-09-30)
193
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ChMeas.PDSCH.MCS.
18
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
19
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
20
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
21
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
22
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
23
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
Issue 06 (2011-09-30)
194
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ChMeas.PDSCH.MCS.
24
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
25
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
26
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
27
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
28
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
29
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
Issue 06 (2011-09-30)
195
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ChMeas.PDSCH.MCS.
30
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PDSCH.MCS.
31
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727412
L.ChMeas.PUSCH.MCS.0
1526727413
L.ChMeas.PUSCH.MCS.1
1526727414
L.ChMeas.PUSCH.MCS.2
1526727415
L.ChMeas.PUSCH.MCS.3
1526727416
L.ChMeas.PUSCH.MCS.4
1526727417
L.ChMeas.PUSCH.MCS.5
1526727418
L.ChMeas.PUSCH.MCS.6
1526727419
L.ChMeas.PUSCH.MCS.7
1526727420
L.ChMeas.PUSCH.MCS.8
1526727421
L.ChMeas.PUSCH.MCS.9
196
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727422
L.ChMeas.PUSCH.MCS.10
1526727423
L.ChMeas.PUSCH.MCS.11
1526727424
L.ChMeas.PUSCH.MCS.12
1526727425
L.ChMeas.PUSCH.MCS.13
1526727426
L.ChMeas.PUSCH.MCS.14
1526727427
L.ChMeas.PUSCH.MCS.15
1526727428
L.ChMeas.PUSCH.MCS.16
1526727429
L.ChMeas.PUSCH.MCS.17
1526727430
L.ChMeas.PUSCH.MCS.18
1526727431
L.ChMeas.PUSCH.MCS.19
1526727432
L.ChMeas.PUSCH.MCS.20
1526727433
L.ChMeas.PUSCH.MCS.21
1526727434
L.ChMeas.PUSCH.MCS.22
1526727435
L.ChMeas.PUSCH.MCS.23
1526727436
L.ChMeas.PUSCH.MCS.24
1526727437
L.ChMeas.PUSCH.MCS.25
1526727438
L.ChMeas.PUSCH.MCS.26
1526727439
L.ChMeas.PUSCH.MCS.27
1526727440
L.ChMeas.PUSCH.MCS.28
197
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1526727441
L.ChMeas.PUSCH.MCS.29
1526727442
L.ChMeas.PUSCH.MCS.30
1526727443
L.ChMeas.PUSCH.MCS.31
Description
The uplink MCS index is an output of uplink scheduling. Each index corresponds to a unique
modulation order, a TBS index, and a redundancy version. The counters measure the number of
times each MCS index ranging from 0 to 31 is scheduled in the uplink in a cell.
Measurement Point
The corresponding counter is incremented by 1 each time the eNodeB schedules an MCS index
for a UE in the uplink within a TTI. A deviation of one sampling period may be caused in the
sampling timer when the timer performs time synchronization. As a result, a deviation of one
sampling period will also be generated in the value of the corresponding counter, which affects
the values of the KPIs that are calculated by using the counter. The effects vary depending on
the deviation in the value of the counter and calculation formulas for the KPIs.
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.ChMeas.PUSCH.MCS.
0
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
Issue 06 (2011-09-30)
198
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ChMeas.PUSCH.MCS.
1
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
2
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
3
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
4
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
5
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
6
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
Issue 06 (2011-09-30)
199
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ChMeas.PUSCH.MCS.
7
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
8
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
9
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
10
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
11
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
12
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
Issue 06 (2011-09-30)
200
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ChMeas.PUSCH.MCS.
13
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
14
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
15
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
16
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
17
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
18
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
Issue 06 (2011-09-30)
201
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ChMeas.PUSCH.MCS.
19
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
20
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
21
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
22
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
23
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
24
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
Issue 06 (2011-09-30)
202
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ChMeas.PUSCH.MCS.
25
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
26
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
27
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
28
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
29
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
L.ChMeas.PUSCH.MCS.
30
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
Issue 06 (2011-09-30)
203
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ChMeas.PUSCH.MCS.
31
LBFD-002025
Basic Scheduling
LBFD-001005
TDLBFD-002025
TDLBFD-001005
Basic Scheduling
Modulation: DL/UL QPSK, DL/UL
16QAM, DL/UL 64QAM
Counter
The following table describes the counters contained in the "PRB Measurement (Cell)
(ChMeas.PRB.Cell)" measurement unit:
Counte
r ID
Counter Name
Description
Original Release
1526726
737
L.ChMeas.PRB.UL
.Used.Avg
Earlier than
V100R003C00
1526726
740
L.ChMeas.PRB.DL
.Used.Avg
Earlier than
V100R003C00
1526727
483
L.ChMeas.PRB.PU
CCH.Avg
Earlier than
V100R003C00
Counter Name
Description
1526726737
L.ChMeas.PRB.UL.Used.A
vg
Description
The uplink PRBs in a cell are occupied by the PUSCH,PRACH and PUCCH in frequency
division mode, with those PRBs at both ends being used by the PUCCH and others in the middle
Issue 06 (2011-09-30)
204
eNodeB
Performance Counter Reference
being used for the PUSCH and PRACH. The total number of PRBs used by the PUCCH,PRACH
and PUSCH is the number of used uplink PRBs. The counter measures the average number of
used uplink PRBs in a cell. It is used to analyze the usage of uplink PRBs.
Measurement Point
The number of used uplink PRBs in a cell is sampled per second. At the end of a measurement
period, the average of these sampling results is used as the value of the counter.A deviation of
one sampling period may be caused in the sampling timer when the timer performs time
synchronization. As a result, a deviation of one sampling period will also be generated in the
value of this counter, which affects the values of the KPIs that are calculated by using this
counter. The effects vary depending on the deviation in the value of this counter and calculation
formulas for the KPIs.
Formula
None
Unit
None
Related Features
Counter Name
Feature ID
Feature Name
L.ChMeas.PRB.UL.Used
.Avg
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
Counter Name
Description
1526726740
L.ChMeas.PRB.DL.Used.A
vg
Description
The counter measures the average number of used downlink PRBs in a cell. It is used to analyze
the usage of downlink PRBs.
Measurement Point
The number of used downlink PRBs in a cell is sampled per second. At the end of a measurement
period, the average of these sampling results is used as the value of the counter.
Issue 06 (2011-09-30)
205
eNodeB
Performance Counter Reference
Formula
None
Unit
None
Related Features
Counter Name
Feature ID
Feature Name
L.ChMeas.PRB.DL.Used
.Avg
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
Counter Name
Description
1526727483
L.ChMeas.PRB.PUCCH.Av
g
Description
The counters measure the average number of used PRBs over the PUCCH in a cell. It is used to
analyze the usage of PRBs over the PUCCH.
Measurement Point
The number of used PRBs over the PUCCH is sampled per second. At the end of a measurement
period, the average of these sampling results is used as the value of the counter.A deviation of
one sampling period may be caused in the sampling timer when the timer performs time
synchronization. As a result, a deviation of one sampling period will also be generated in the
value of this counter, which affects the values of the KPIs that are calculated by using this
counter. The effects vary depending on the deviation in the value of this counter and calculation
formulas for the KPIs.
Formula
None
Unit
None
Issue 06 (2011-09-30)
206
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.ChMeas.PRB.PUCCH.
Avg
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
Counter
The following table describes the counters contained in the "MAC Data Unit Measurement (Cell)
(Traffic.MAC.Cell)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
352
L.Traffic.BCH.TB.
bits
Earlier than
V100R003C00
1526727
353
L.Traffic.PCH.TB.
bits
Earlier than
V100R003C00
1526727
354
L.Traffic.DL.SCH.
QPSK.TB
Earlier than
V100R003C00
1526727
355
L.Traffic.DL.SCH.
16QAM.TB
Earlier than
V100R003C00
1526727
356
L.Traffic.DL.SCH.
64QAM.TB
Earlier than
V100R003C00
1526727
357
L.Traffic.DL.SCH.
QPSK.TB.bits
Earlier than
V100R003C00
1526727
358
L.Traffic.DL.SCH.
16QAM.TB.bits
Earlier than
V100R003C00
207
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
359
L.Traffic.DL.SCH.
64QAM.TB.bits
Earlier than
V100R003C00
1526727
360
L.Traffic.DL.SCH.
QPSK.TB.Retrans
Earlier than
V100R003C00
1526727
361
L.Traffic.DL.SCH.
16QAM.TB.Retran
s
Earlier than
V100R003C00
1526727
362
L.Traffic.DL.SCH.
64QAM.TB.Retran
s
Earlier than
V100R003C00
1526727
363
L.Traffic.DL.SCH.
QPSK.TB.Retrans.
bits
Earlier than
V100R003C00
1526727
364
L.Traffic.DL.SCH.
16QAM.TB.Retran
s.bits
Earlier than
V100R003C00
1526727
365
L.Traffic.DL.SCH.
64QAM.TB.Retran
s.bits
Earlier than
V100R003C00
1526727
366
L.Traffic.UL.SCH.
QPSK.TB
Earlier than
V100R003C00
1526727
367
L.Traffic.UL.SCH.
16QAM.TB
Earlier than
V100R003C00
1526727
368
L.Traffic.UL.SCH.
64QAM.TB
Earlier than
V100R003C00
1526727
369
L.Traffic.UL.SCH.
QPSK.TB.bits
Earlier than
V100R003C00
1526727
370
L.Traffic.UL.SCH.
16QAM.TB.bits
Earlier than
V100R003C00
1526727
371
L.Traffic.UL.SCH.
64QAM.TB.bits
Earlier than
V100R003C00
208
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
372
L.Traffic.UL.SCH.
QPSK.TB.Retrans
Earlier than
V100R003C00
1526727
373
L.Traffic.UL.SCH.
16QAM.TB.Retran
s
Earlier than
V100R003C00
1526727
374
L.Traffic.UL.SCH.
64QAM.TB.Retran
s
Earlier than
V100R003C00
1526727
375
L.Traffic.UL.SCH.
QPSK.TB.Retrans.
bits
Earlier than
V100R003C00
1526727
376
L.Traffic.UL.SCH.
16QAM.TB.Retran
s.bits
Earlier than
V100R003C00
1526727
377
L.Traffic.UL.SCH.
64QAM.TB.Retran
s.bits
Earlier than
V100R003C00
1526728
180
L.Traffic.DL.SCH.
QPSK.ErrTB.Ibler
V100R003C00
1526728
182
L.Traffic.DL.SCH.
16QAM.ErrTB.Ibl
er
V100R003C00
1526728
184
L.Traffic.DL.SCH.
64QAM.ErrTB.Ibl
er
V100R003C00
1526728
181
L.Traffic.DL.SCH.
QPSK.ErrTB.Rble
r
V100R003C00
1526728
183
L.Traffic.DL.SCH.
16QAM.ErrTB.Rbl
er
V100R003C00
1526728
185
L.Traffic.DL.SCH.
64QAM.ErrTB.Rbl
er
V100R003C00
209
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1526728
186
L.Traffic.UL.SCH.
QPSK.ErrTB.Ibler
V100R003C00
1526728
188
L.Traffic.UL.SCH.
16QAM.ErrTB.Ibl
er
V100R003C00
1526728
190
L.Traffic.UL.SCH.
64QAM.ErrTB.Ibl
er
V100R003C00
1526728
187
L.Traffic.UL.SCH.
QPSK.ErrTB.Rble
r
V100R003C00
1526728
189
L.Traffic.UL.SCH.
16QAM.ErrTB.Rbl
er
V100R003C00
1526728
191
L.Traffic.UL.SCH.
64QAM.ErrTB.Rbl
er
V100R003C00
Counter Name
Description
1526727352
L.Traffic.BCH.TB.bits
Description
The master information block (MIB) is transmitted over the broadcast channel (BCH). The
counter measures the size of TBs transmitted over the BCH in a cell.
Measurement Point
When the eNodeB transmits a TB over the BCH in a cell, the counter is incremented by the size
of the TB. A deviation of one sampling period may be caused in the sampling timer when the
timer performs time synchronization. As a result, a deviation of one sampling period will also
be generated in the value of the corresponding counter, which affects the values of the KPIs that
are calculated by using the counter. The effects vary depending on the deviation in the value of
the counter and calculation formulas for the KPIs.
Issue 06 (2011-09-30)
210
eNodeB
Performance Counter Reference
Formula
None
Unit
bit
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.BCH.TB.bits
LBFD-002002
LBFD-001005
TDLBFD-002002
TDLBFD-001005
Counter Name
Description
1526727353
L.Traffic.PCH.TB.bits
Description
The air interface paging message is transmitted over the paging channel (PCH). The counter
measures the size of TBs transmitted over the PCH in a cell.
Measurement Point
When the eNodeB transmits a TB over the PCH in a cell, the counter is incremented by the size
of the TB. A deviation of one sampling period may be caused in the sampling timer when the
timer performs time synchronization. As a result, a deviation of one sampling period will also
be generated in the value of the corresponding counter, which affects the values of the KPIs that
are calculated by using the counter. The effects vary depending on the deviation in the value of
the counter and calculation formulas for the KPIs.
Formula
None
Unit
bit
Issue 06 (2011-09-30)
211
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.PCH.TB.bits
LBFD-002002
LBFD-001005
TDLBFD-002002
TDLBFD-001005
Counter Name
Description
1526727354
L.Traffic.DL.SCH.QPSK.T
B
1526727355
L.Traffic.DL.SCH.
16QAM.TB
1526727356
L.Traffic.DL.SCH.
64QAM.TB
Description
The eNodeB determines an MCS index for initial transmission of the UE based on the quality
of the downlink channel. Each MCS index corresponds to a modulation mode, such as QPSK,
16QAM, and 64QAM. The counters measure the size of TBs initially transmitted over the
downlink SCH in QPSK, 16QAM, and 64QAM modulation modes in a cell, respectively.
Measurement Point
The corresponding counter is incremented by 1 based on the modulation mode each time the
eNodeB initially transmits a TB over the downlink SCH. A deviation of one sampling period
may be caused in the sampling timer when the timer performs time synchronization. As a result,
a deviation of one sampling period will also be generated in the value of the corresponding
counter, which affects the values of the KPIs that are calculated by using the counter. The effects
vary depending on the deviation in the value of the counter and calculation formulas for the
KPIs.
Formula
None
Unit
None
Issue 06 (2011-09-30)
212
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.DL.SCH.QPSK
.TB
LBFD-002002
LBFD-001005
TDLBFD-002002
TDLBFD-001005
L.Traffic.DL.SCH.
16QAM.TB
LBFD-002002
LBFD-001005
TDLBFD-002002
TDLBFD-001005
L.Traffic.DL.SCH.
64QAM.TB
LBFD-002002
LBFD-001005
TDLBFD-002002
TDLBFD-001005
Counter Name
Description
1526727357
L.Traffic.DL.SCH.QPSK.T
B.bits
1526727358
L.Traffic.DL.SCH.
16QAM.TB.bits
1526727359
L.Traffic.DL.SCH.
64QAM.TB.bits
Description
The eNodeB determines an MCS index for initial transmission of the UE based on the quality
of the downlink channel. Each MCS index corresponds to a modulation mode, such as QPSK,
16QAM, and 64QAM. The counters measure the size of TBs initially transmitted over the
downlink SCH in QPSK, 16QAM, and 64QAM modulation modes in a cell, respectively.
Issue 06 (2011-09-30)
213
eNodeB
Performance Counter Reference
Measurement Point
The corresponding counter is incremented by 1 based on the modulation mode each time the
eNodeB initially transmits a TB over the downlink SCH. A deviation of one sampling period
may be caused in the sampling timer when the timer performs time synchronization. As a result,
a deviation of one sampling period will also be generated in the value of the corresponding
counter, which affects the values of the KPIs that are calculated by using the counter. The effects
vary depending on the deviation in the value of the counter and calculation formulas for the
KPIs.
Formula
None
Unit
bit
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.DL.SCH.QPSK
.TB.bits
LBFD-002002
LBFD-001005
TDLBFD-002002
TDLBFD-001005
L.Traffic.DL.SCH.
16QAM.TB.bits
LBFD-002002
LBFD-001005
TDLBFD-002002
TDLBFD-001005
L.Traffic.DL.SCH.
64QAM.TB.bits
LBFD-002002
LBFD-001005
TDLBFD-002002
TDLBFD-001005
Issue 06 (2011-09-30)
214
eNodeB
Performance Counter Reference
Counter Name
Description
1526727360
L.Traffic.DL.SCH.QPSK.T
B.Retrans
1526727361
L.Traffic.DL.SCH.
16QAM.TB.Retrans
1526727362
L.Traffic.DL.SCH.
64QAM.TB.Retrans
Description
The eNodeB determines an MCS index for retransmission of the UE based on the quality of the
downlink channel. Each MCS index corresponds to a modulation mode, such as QPSK, 16QAM,
and 64QAM. The counters measure the size of TBs retransmitted over the downlink SCH in
QPSK, 16QAM, and 64QAM modulation modes in a cell, respectively.
Measurement Point
The corresponding counter is incremented by 1 based on the modulation mode each time the
eNodeB retransmits a TB over the downlink SCH. A deviation of one sampling period may be
caused in the sampling timer when the timer performs time synchronization. As a result, a
deviation of one sampling period will also be generated in the value of the corresponding counter,
which affects the values of the KPIs that are calculated by using the counter. The effects vary
depending on the deviation in the value of the counter and calculation formulas for the KPIs.
Formula
None
Unit
None
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.DL.SCH.QPSK
.TB.Retrans
LBFD-002002
LBFD-001005
TDLBFD-002002
TDLBFD-001005
Issue 06 (2011-09-30)
215
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.Traffic.DL.SCH.
16QAM.TB.Retrans
LBFD-002002
LBFD-001005
TDLBFD-002002
TDLBFD-001005
L.Traffic.DL.SCH.
64QAM.TB.Retrans
LBFD-002002
LBFD-001005
TDLBFD-002002
TDLBFD-001005
Counter Name
Description
1526727363
L.Traffic.DL.SCH.QPSK.T
B.Retrans.bits
1526727364
L.Traffic.DL.SCH.
16QAM.TB.Retrans.bits
1526727365
L.Traffic.DL.SCH.
64QAM.TB.Retrans.bits
Description
The eNodeB determines an MCS index for retransmission of the UE based on the quality of the
downlink channel. Each MCS index corresponds to a modulation mode, such as QPSK, 16QAM,
and 64QAM. The counters measure the size of TBs retransmitted over the downlink SCH in
QPSK, 16QAM, and 64QAM modulation modes in a cell, respectively.
Measurement Point
The corresponding counter is incremented by 1 based on the modulation mode each time the
eNodeB retransmits a TB over the downlink SCH. A deviation of one sampling period may be
caused in the sampling timer when the timer performs time synchronization. As a result, a
deviation of one sampling period will also be generated in the value of the corresponding counter,
which affects the values of the KPIs that are calculated by using the counter. The effects vary
depending on the deviation in the value of the counter and calculation formulas for the KPIs.
Issue 06 (2011-09-30)
216
eNodeB
Performance Counter Reference
Formula
None
Unit
bit
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.DL.SCH.QPSK
.TB.Retrans.bits
LBFD-002002
LBFD-001005
TDLBFD-002002
TDLBFD-001005
L.Traffic.DL.SCH.
16QAM.TB.Retrans.bits
LBFD-002002
LBFD-001005
TDLBFD-002002
TDLBFD-001005
L.Traffic.DL.SCH.
64QAM.TB.Retrans.bits
LBFD-002002
LBFD-001005
TDLBFD-002002
TDLBFD-001005
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727366
L.Traffic.UL.SCH.QPSK.T
B
1526727367
L.Traffic.UL.SCH.
16QAM.TB
1526727368
L.Traffic.UL.SCH.
64QAM.TB
217
eNodeB
Performance Counter Reference
Description
The eNodeB determines an MCS index for initial transmission of the UE based on the quality
of the uplink channel. Each MCS index corresponds to a modulation mode, such as QPSK,
16QAM, and 64QAM. The counters measure the size of TBs initially transmitted over the uplink
SCH in QPSK, 16QAM, and 64QAM modulation modes in a cell, respectively.
Measurement Point
The corresponding counter is incremented by 1 based on the modulation mode each time the
eNodeB receives a TB initially transmitted over the uplink SCH. A deviation of one sampling
period may be caused in the sampling timer when the timer performs time synchronization. As
a result, a deviation of one sampling period will also be generated in the value of the
corresponding counter, which affects the values of the KPIs that are calculated by using the
counter. The effects vary depending on the deviation in the value of the counter and calculation
formulas for the KPIs.
Formula
None
Unit
None
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.UL.SCH.QPSK
.TB
LBFD-002002
LBFD-001005
TDLBFD-002002
TDLBFD-001005
L.Traffic.UL.SCH.
16QAM.TB
LBFD-002002
LBFD-001005
TDLBFD-002002
TDLBFD-001005
L.Traffic.UL.SCH.
64QAM.TB
Issue 06 (2011-09-30)
LBFD-002002
LOFD-001006
UL 64QAM
TDLBFD-002002
TDLOFD-001006
UL 64QAM
218
eNodeB
Performance Counter Reference
Counter Name
Description
1526727369
L.Traffic.UL.SCH.QPSK.T
B.bits
1526727370
L.Traffic.UL.SCH.
16QAM.TB.bits
1526727371
L.Traffic.UL.SCH.
64QAM.TB.bits
Description
The eNodeB determines an MCS index for initial transmission of the UE based on the quality
of the uplink channel. Each MCS index corresponds to a modulation mode, such as QPSK,
16QAM, and 64QAM. The counters measure the size of TBs initially transmitted over the uplink
SCH in QPSK, 16QAM, and 64QAM modulation modes in a cell, respectively.
Measurement Point
The corresponding counter is incremented by 1 based on the modulation mode each time the
eNodeB receives a TB initially transmitted over the uplink SCH. A deviation of one sampling
period may be caused in the sampling timer when the timer performs time synchronization. As
a result, a deviation of one sampling period will also be generated in the value of the
corresponding counter, which affects the values of the KPIs that are calculated by using the
counter. The effects vary depending on the deviation in the value of the counter and calculation
formulas for the KPIs.
Formula
None
Unit
bit
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.UL.SCH.QPSK
.TB.bits
LBFD-002002
LBFD-001005
TDLBFD-002002
TDLBFD-001005
Issue 06 (2011-09-30)
219
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.Traffic.UL.SCH.
16QAM.TB.bits
LBFD-002002
LBFD-001005
TDLBFD-002002
TDLBFD-001005
L.Traffic.UL.SCH.
64QAM.TB.bits
LBFD-002002
LOFD-001006
UL 64QAM
TDLBFD-002002
TDLOFD-001006
UL 64QAM
Counter Name
Description
1526727372
L.Traffic.UL.SCH.QPSK.T
B.Retrans
1526727373
L.Traffic.UL.SCH.
16QAM.TB.Retrans
1526727374
L.Traffic.UL.SCH.
64QAM.TB.Retrans
Description
The eNodeB determines an MCS index for retransmission of the UE based on the quality of the
uplink channel. Each MCS index corresponds to a modulation mode, such as QPSK, 16QAM,
and 64QAM. The counters measure the size of TBs retransmitted over the uplink SCH in QPSK,
16QAM, and 64QAM modulation modes in a cell, respectively.
Measurement Point
The corresponding counter is incremented by 1 based on the modulation mode each time the
eNodeB receives a TB retransmitted over the uplink SCH. A deviation of one sampling period
may be caused in the sampling timer when the timer performs time synchronization. As a result,
a deviation of one sampling period will also be generated in the value of the corresponding
counter, which affects the values of the KPIs that are calculated by using the counter. The effects
vary depending on the deviation in the value of the counter and calculation formulas for the
KPIs.
Formula
None
Issue 06 (2011-09-30)
220
eNodeB
Performance Counter Reference
Unit
None
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.UL.SCH.QPSK
.TB.Retrans
LBFD-002002
LBFD-001005
TDLBFD-002002
TDLBFD-001005
L.Traffic.UL.SCH.
16QAM.TB.Retrans
LBFD-002002
LBFD-001005
TDLBFD-002002
TDLBFD-001005
L.Traffic.UL.SCH.
64QAM.TB.Retrans
LBFD-002002
LOFD-001006
UL 64QAM
TDLBFD-002002
TDLOFD-001006
UL 64QAM
Counter Name
Description
1526727375
L.Traffic.UL.SCH.QPSK.T
B.Retrans.bits
1526727376
L.Traffic.UL.SCH.
16QAM.TB.Retrans.bits
1526727377
L.Traffic.UL.SCH.
64QAM.TB.Retrans.bits
Description
The eNodeB determines an MCS index for retransmission of the UE based on the quality of the
uplink channel. Each MCS index corresponds to a modulation mode, such as QPSK, 16QAM,
and 64QAM. The counters measure the size of TBs retransmitted over the uplink SCH in QPSK,
16QAM, and 64QAM modulation modes in a cell, respectively.
Issue 06 (2011-09-30)
221
eNodeB
Performance Counter Reference
Measurement Point
The corresponding counter is incremented by 1 based on the modulation mode each time the
eNodeB receives a TB retransmitted over the uplink SCH. A deviation of one sampling period
may be caused in the sampling timer when the timer performs time synchronization. As a result,
a deviation of one sampling period will also be generated in the value of the corresponding
counter, which affects the values of the KPIs that are calculated by using the counter. The effects
vary depending on the deviation in the value of the counter and calculation formulas for the
KPIs.
Formula
None
Unit
bit
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.UL.SCH.QPSK
.TB.Retrans.bits
LBFD-002002
LBFD-001005
TDLBFD-002002
TDLBFD-001005
L.Traffic.UL.SCH.
16QAM.TB.Retrans.bits
LBFD-002002
LBFD-001005
TDLBFD-002002
TDLBFD-001005
L.Traffic.UL.SCH.
64QAM.TB.Retrans.bits
Issue 06 (2011-09-30)
LBFD-002002
LOFD-001006
UL 64QAM
TDLBFD-002002
TDLOFD-001006
UL 64QAM
222
eNodeB
Performance Counter Reference
Counter Name
Description
1526728180
L.Traffic.DL.SCH.QPSK.Er
rTB.Ibler
1526728182
L.Traffic.DL.SCH.
16QAM.ErrTB.Ibler
1526728184
L.Traffic.DL.SCH.
64QAM.ErrTB.Ibler
Description
The counters measure the number of downlink error TBs after initial transmission in QPSK,
16QAM, and 64QAM modulation mode.
Measurement Point
The corresponding counter is incremented by 1 based on the modulation mode each time the
eNodeB receives a downlink error TB after initial transmission.
Formula
None
Unit
None
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.Traffic.DL.SCH.QPSK
.ErrTB.Ibler
LBFD-002002
TDLBFD-002002
L.Traffic.DL.SCH.
16QAM.ErrTB.Ibler
LBFD-002002
TDLBFD-002002
L.Traffic.DL.SCH.
64QAM.ErrTB.Ibler
LBFD-002002
TDLBFD-002002
223
eNodeB
Performance Counter Reference
Counter Name
Description
1526728181
L.Traffic.DL.SCH.QPSK.Er
rTB.Rbler
1526728183
L.Traffic.DL.SCH.
16QAM.ErrTB.Rbler
1526728185
L.Traffic.DL.SCH.
64QAM.ErrTB.Rbler
Description
The counters measure the number of downlink error TBs after the maximum number of
retransmissions in QPSK, 16QAM, or 64QAM modulation mode is reached.
Measurement Point
The corresponding counter is incremented by 1 based on the modulation mode each time there
is a downlink error TB after the maximum number of retransmissions is reached.
Formula
None
Unit
None
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.Traffic.DL.SCH.QPSK
.ErrTB.Rbler
LBFD-002002
TDLBFD-002002
L.Traffic.DL.SCH.
16QAM.ErrTB.Rbler
LBFD-002002
TDLBFD-002002
L.Traffic.DL.SCH.
64QAM.ErrTB.Rbler
LBFD-002002
TDLBFD-002002
224
eNodeB
Performance Counter Reference
Counter Name
Description
1526728186
L.Traffic.UL.SCH.QPSK.Er
rTB.Ibler
1526728188
L.Traffic.UL.SCH.
16QAM.ErrTB.Ibler
1526728190
L.Traffic.UL.SCH.
64QAM.ErrTB.Ibler
Description
The counters measure the number of uplink error TBs after initial transmission in QPSK,
16QAM, and 64QAM modulation mode.
Measurement Point
The corresponding counter is incremented by 1 based on the modulation mode each time the
eNodeB receives an uplink error TB after initial transmission.
Formula
None
Unit
None
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.Traffic.UL.SCH.QPSK
.ErrTB.Ibler
LBFD-002002
TDLBFD-002002
L.Traffic.UL.SCH.
16QAM.ErrTB.Ibler
LBFD-002002
TDLBFD-002002
L.Traffic.UL.SCH.
64QAM.ErrTB.Ibler
LBFD-002002
TDLBFD-002002
225
eNodeB
Performance Counter Reference
Counter Name
Description
1526728187
L.Traffic.UL.SCH.QPSK.Er
rTB.Rbler
1526728189
L.Traffic.UL.SCH.
16QAM.ErrTB.Rbler
1526728191
L.Traffic.UL.SCH.
64QAM.ErrTB.Rbler
Description
The counters measure the number of uplink error TBs after the maximum number of
retransmissions in QPSK, 16QAM, or 64QAM modulation mode is reached.
Measurement Point
The corresponding counter is incremented by 1 based on the modulation mode each time there
is an uplink error TB after the maximum number of retransmissions is reached.
Formula
None
Unit
None
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.Traffic.UL.SCH.QPSK
.ErrTB.Rbler
LBFD-002002
TDLBFD-002002
L.Traffic.UL.SCH.
16QAM.ErrTB.Rbler
LBFD-002002
TDLBFD-002002
L.Traffic.UL.SCH.
64QAM.ErrTB.Rbler
LBFD-002002
TDLBFD-002002
226
eNodeB
Performance Counter Reference
Counter
The following table describes the counters contained in the "User Number Measurement (Cell)
(Traffic.User.Cell)" measurement unit:
Counte
r ID
Counter Name
Description
Original Release
1526727
378
L.Traffic.User.Avg
Earlier than
V100R003C00
1526727
379
L.Traffic.User.Max
Earlier than
V100R003C00
1526727
380
L.Traffic.CEU.Avg
Earlier than
V100R003C00
1526727
381
L.Traffic.CEU.Ma
x
Earlier than
V100R003C00
1526727
382
L.Traffic.User.UL
Data.Avg
Earlier than
V100R003C00
1526727
383
L.Traffic.User.UL
Data.Max
Earlier than
V100R003C00
1526727
384
L.Traffic.User.DL
Data.Avg
Earlier than
V100R003C00
1526727
385
L.Traffic.User.DL
Data.Max
Earlier than
V100R003C00
Counter Name
Description
1526727378
L.Traffic.User.Avg
Description
The counter measures the average number of users in a cell.
Issue 06 (2011-09-30)
227
eNodeB
Performance Counter Reference
Measurement Point
The number of all connected synchronization and asynchronization users in a cell is sampled
per second. At the end of a measurement period, the average of these sampling results is used
as the value of the counter.
Formula
None
Unit
None
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.User.Avg
LBFD-002007
TDLBFD-002007
Counter Name
Description
1526727379
L.Traffic.User.Max
Description
The counter measures the maximum number of users in a cell.
Measurement Point
The number of all connected synchronization and asynchronization users in a cell is sampled
per second. At the end of a measurement period, the maximum of these sampling results is used
as the value of the counter.
Formula
None
Unit
None
Issue 06 (2011-09-30)
228
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.User.Max
LBFD-002007
TDLBFD-002007
Counter Name
Description
1526727380
L.Traffic.CEU.Avg
Description
The counter measures the average number of edge users in a cell.
Measurement Point
The number of all connected synchronization and asynchronization edge users in a cell is
sampled per second. At the end of a measurement period, the average of these sampling results
is used as the value of the counter.
Formula
None
Unit
None
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.CEU.Avg
LBFD-002007
TDLBFD-002007
LOFD-00101401
TDLOFD-00101401
Issue 06 (2011-09-30)
229
eNodeB
Performance Counter Reference
Counter Name
Description
1526727381
L.Traffic.CEU.Max
Description
The counter measures the maximum number of edge users in a cell.
Measurement Point
The number of all connected synchronization and asynchronization edge users in a cell is
sampled per second. At the end of a measurement period, the maximum of these sampling results
is used as the value of the counter.
Formula
None
Unit
None
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.CEU.Max
LBFD-002007
TDLBFD-002007
LOFD-00101401
TDLOFD-00101401
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727382
L.Traffic.User.ULData.Avg
230
eNodeB
Performance Counter Reference
Description
The counter measures the average number of users with data in the uplink buffer in a cell.
Measurement Point
The number of connected users with data in the uplink buffer in a cell is sampled per second.
At the end of a measurement period, the average of these sampling results is used as the value
of the counter.
Formula
None
Unit
None
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.User.ULData.A
vg
LBFD-002007
TDLBFD-002007
Counter Name
Description
1526727383
L.Traffic.User.ULData.Max
Description
The counter measures the maximum number of users with data in the uplink buffer in a cell.
Measurement Point
The number of connected users with data in the uplink buffer in a cell is sampled per second.
At the end of a measurement period, the maximum of these sampling results is used as the value
of the counter.
Formula
None
Issue 06 (2011-09-30)
231
eNodeB
Performance Counter Reference
Unit
None
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.User.ULData.
Max
LBFD-002007
TDLBFD-002007
Counter Name
Description
1526727384
L.Traffic.User.DLData.Avg
Description
The counter measures the average number of users with data in the downlink buffer in a cell.
Measurement Point
The number of connected users with data in the downlink buffer in a cell is sampled per second.
At the end of a measurement period, the average of these sampling results is used as the value
of the counter.
Formula
None
Unit
None
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.Traffic.User.DLData.A
vg
LBFD-002007
TDLBFD-002007
232
eNodeB
Performance Counter Reference
Counter Name
Description
1526727385
L.Traffic.User.DLData.Max
Description
The counter measures the maximum number of users with data in the downlink buffer in a cell.
Measurement Point
The number of connected users with data in the downlink buffer in a cell is sampled per second.
At the end of a measurement period, the maximum of these sampling results is used as the value
of the counter.
Formula
None
Unit
None
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.User.DLData.
Max
LBFD-002007
TDLBFD-002007
Issue 06 (2011-09-30)
233
eNodeB
Performance Counter Reference
Figure 1-78
Figure 1-79
Issue 06 (2011-09-30)
234
eNodeB
Performance Counter Reference
Counter
The following table describes the counters contained in the "Inter-RAT Outgoing Handover
Measurement (Cell) (HO.IRAT.Out.Cell)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526726
986
L.IRATHO.E2C.Pr
epAttOut
Earlier than
V100R003C00
1526726
987
L.IRATHO.E2C.E
xecAttOut
Earlier than
V100R003C00
1526726
988
L.IRATHO.E2C.E
xecSuccOut
Earlier than
V100R003C00
1526726
989
L.IRATHO.E2W.P
repAttOut
Earlier than
V100R003C00
1526726
990
L.IRATHO.E2W.E
xecAttOut
Earlier than
V100R003C00
1526726
991
L.IRATHO.E2W.E
xecSuccOut
Earlier than
V100R003C00
1526726
992
L.IRATHO.E2G.P
repAttOut
Earlier than
V100R003C00
1526726
993
L.IRATHO.E2G.E
xecAttOut
Earlier than
V100R003C00
1526726
994
L.IRATHO.E2G.E
xecSuccOut
Earlier than
V100R003C00
1526727
226
L.IRATHO.E2T.Pr
epAttOut
Earlier than
V100R003C00
1526727
227
L.IRATHO.E2T.E
xecAttOut
Earlier than
V100R003C00
235
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1526727
228
L.IRATHO.E2T.E
xecSuccOut
Earlier than
V100R003C00
Counter Name
Description
1526726986
L.IRATHO.E2C.PrepAttOut
Description
The counter measures the number of outgoing handover attempts from E-UTRAN to
CDMA2000.
Measurement Point
As shown in point A in Figure 1-80, the counter is incremented by 1 each time the eNodeB
receives a Measurement Report message from the UE and decides to perform a handover from
E-UTRAN to CDMA2000.
Issue 06 (2011-09-30)
236
eNodeB
Performance Counter Reference
Figure 1-80
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.IRATHO.E2C.PrepAttOut
LOFD-001021
237
eNodeB
Performance Counter Reference
Counter Name
Description
1526726987
L.IRATHO.E2C.ExecAttOut
Description
The counter measure the number of performed outgoing handovers from E-UTRAN to
CDMA2000.
Measurement Point
As shown in point B in Figure 1-81, the counter is incremented by 1 each time the eNodeB
sends a Mobility from EUTRA Command message to the UE during a handover from E-UTRAN
to CDMA2000.
Issue 06 (2011-09-30)
238
eNodeB
Performance Counter Reference
Figure 1-81
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.IRATHO.E2C.ExecAttOut
LOFD-001021
239
eNodeB
Performance Counter Reference
Counter Name
Description
1526726988
L.IRATHO.E2C.ExecSuccOut
Description
The counter measures the number of successful outgoing handovers from E-UTRAN to
CDMA2000.
Measurement Point
As shown in point C in Figure 1-82, the counter is incremented by 1 each time the eNodeB
receives a UE CONTEXT RELEASE COMMAND message from the MME after the UE is
handed over from E-UTRAN to CDMA2000.
Issue 06 (2011-09-30)
240
eNodeB
Performance Counter Reference
Figure 1-82
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.IRATHO.E2C.ExecSuccOut
LOFD-001021
LOFD-001035
241
eNodeB
Performance Counter Reference
Counter Name
Description
1526726989
L.IRATHO.E2W.PrepAttOut
Description
The counter measures the number of outgoing handover attempts from E-UTRAN to UTRAN.
Measurement Point
As shown in point A in Figure 1-83, the counter is incremented by 1 each time the eNodeB
receives a Measurement Report message from the UE and decides to perform a handover from
E-UTRAN to UTRAN.
Figure 1-83
Formula
None
Issue 06 (2011-09-30)
242
eNodeB
Performance Counter Reference
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.IRATHO.E2W.PrepAttOut
LOFD-001019
LOFD-001022
LOFD-001033
SRVCC to UTRAN
TDLOFD-001019
CS Fallback to UTRAN
TDLOFD-001022
TDLOFD-001033
SRVCC to UTRAN
CS FallBack to UTRAN
Counter Name
Description
1526726990
L.IRATHO.E2W.ExecAttOut
Description
The counter measure the number of performed outgoing handovers from E-UTRAN to UTRAN.
Measurement Point
As shown in point B in Figure 1-84, the counter is incremented by 1 each time the eNodeB
sends a Mobility from EUTRA Command message to the UE during a handover from E-UTRAN
to UTRAN.
Issue 06 (2011-09-30)
243
eNodeB
Performance Counter Reference
Figure 1-84
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.IRATHO.E2W.ExecAttOut
LOFD-001019
LOFD-001022
TDLOFD-001019
SRVCC to UTRAN
TDLOFD-001022
Issue 06 (2011-09-30)
244
eNodeB
Performance Counter Reference
Counter Name
Description
1526726991
L.IRATHO.E2W.ExecSuccOut
Description
The counter measures the number of successful outgoing handovers from E-UTRAN to UTRAN.
Measurement Point
As shown in point C in Figure 1-85, the counter is incremented by 1 each time the eNodeB
receives a UE CONTEXT RELEASE COMMAND message from the MME after the UE is
handed over from E-UTRAN to UTRAN.
Figure 1-85
Formula
None
Issue 06 (2011-09-30)
245
eNodeB
Performance Counter Reference
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.IRATHO.E2W.ExecSuccOut
LOFD-001019
LOFD-001022
TDLOFD-001019
SRVCC to UTRAN
TDLOFD-001022
Counter Name
Description
1526726992
L.IRATHO.E2G.PrepAttOut
Description
The counter measures the number of outgoing handover attempts from E-UTRAN to GERAN.
Measurement Point
As shown in point A in Figure 1-86, the counter is incremented by 1 each time the eNodeB
receives a Measurement Report message from the UE and decides to perform a handover from
E-UTRAN to GERAN.
Issue 06 (2011-09-30)
246
eNodeB
Performance Counter Reference
Figure 1-86
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.IRATHO.E2G.PrepAttOut
LOFD-001020
LOFD-001023
TDLOFD-001020
SRVCC to GERAN
TDLOFD-001023
Issue 06 (2011-09-30)
247
eNodeB
Performance Counter Reference
Counter Name
Description
1526726993
L.IRATHO.E2G.ExecAttOut
Description
The counter measure the number of performed outgoing handovers from E-UTRAN to GERAN.
Measurement Point
As shown in point B in Figure 1-87, the counter is incremented by 1 each time the eNodeB
sends a Mobility from EUTRA Command message to the UE during a handover from E-UTRAN
to GERAN.
Figure 1-87
Formula
None
Issue 06 (2011-09-30)
248
eNodeB
Performance Counter Reference
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.IRATHO.E2G.ExecAttOut
LOFD-001020
LOFD-001023
TDLOFD-001020
SRVCC to GERAN
TDLOFD-001023
Counter Name
Description
1526726994
L.IRATHO.E2G.ExecSuccOut
Description
The counter measures the number of successful outgoing handovers from E-UTRAN to GERAN.
Measurement Point
As shown in point C in Figure 1-88, the counter is incremented by 1 each time the eNodeB
receives a UE CONTEXT RELEASE COMMAND message from the MME after the UE is
handed over from E-UTRAN to GERAN.
Issue 06 (2011-09-30)
249
eNodeB
Performance Counter Reference
Figure 1-88
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.IRATHO.E2G.ExecSuccOut
LOFD-001020
LOFD-001023
TDLOFD-001020
SRVCC to GERAN
TDLOFD-001023
Issue 06 (2011-09-30)
250
eNodeB
Performance Counter Reference
Counter Name
Description
1526727226
L.IRATHO.E2T.PrepAttOut
Description
The counter measures the number of outgoing handover attempts from E-UTRAN to TDSCDMA.
Measurement Point
As shown in point A in Figure 1-89, the counter is incremented by 1 each time the eNodeB
receives a Measurement Report message from the UE and decides to perform a handover from
E-UTRAN to TD-SCDMA.
Figure 1-89
Formula
None
Issue 06 (2011-09-30)
251
eNodeB
Performance Counter Reference
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.IRATHO.E2T.PrepAttOut
LOFD-001019
LOFD-001022
TDLOFD-001019
SRVCC to UTRAN
TDLOFD-001022
Counter Name
Description
1526727227
L.IRATHO.E2T.ExecAttOut
Description
The counter measures the number of performed outgoing handovers from E-UTRAN to TDSCDMA.
Measurement Point
As shown in point B in Figure 1-90, the counter is incremented by 1 each time the eNodeB
sends a Mobility from EUTRA Command message to the UE during a handover from E-UTRAN
to TD-SCDMA.
Issue 06 (2011-09-30)
252
eNodeB
Performance Counter Reference
Figure 1-90
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.IRATHO.E2T.ExecAttOut
LOFD-001019
LOFD-001022
TDLOFD-001019
SRVCC to UTRAN
TDLOFD-001022
Issue 06 (2011-09-30)
253
eNodeB
Performance Counter Reference
Counter Name
Description
1526727228
L.IRATHO.E2T.ExecSuccOut
Description
The counter measures the number of successful outgoing handovers from E-UTRAN to TDSCDMA.
Measurement Point
As shown in point C in Figure 1-91, the counter is incremented by 1 each time the eNodeB
receives a UE CONTEXT RELEASE COMMAND message from the MME after the UE is
handed over from E-UTRAN to TD-SCDMA.
Figure 1-91
Formula
None
Issue 06 (2011-09-30)
254
eNodeB
Performance Counter Reference
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.IRATHO.E2T.ExecSuccOut
LOFD-001019
LOFD-001022
TDLOFD-001019
SRVCC to UTRAN
TDLOFD-001022
Counter
The following table describes the counters contained in the "Outgoing Handover Measurement
(Cell) (HO.eRAN.Out.Cell)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526726
995
L.HHO.IntraeNB.I
ntraFreq.PrepAttOut
Earlier than
V100R003C00
1526726
998
L.HHO.IntraeNB.I
nterFreq.PrepAttOut
Earlier than
V100R003C00
1526726
996
L.HHO.IntraeNB.I
ntraFreq.ExecAttOut
Earlier than
V100R003C00
1526726
999
L.HHO.IntraeNB.I
nterFreq.ExecAttOut
Earlier than
V100R003C00
255
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526726
997
L.HHO.IntraeNB.I
ntraFreq.ExecSuccOut
Earlier than
V100R003C00
1526727
000
L.HHO.IntraeNB.I
nterFreq.ExecSuccOut
Earlier than
V100R003C00
1526727
001
L.HHO.IntereNB.I
ntraFreq.PrepAttOut
Earlier than
V100R003C00
1526727
004
L.HHO.IntereNB.I
nterFreq.PrepAttOut
Earlier than
V100R003C00
1526727
002
L.HHO.IntereNB.I
ntraFreq.ExecAttOut
Earlier than
V100R003C00
1526727
005
L.HHO.IntereNB.I
nterFreq.ExecAttOut
Earlier than
V100R003C00
1526727
003
L.HHO.IntereNB.I
ntraFreq.ExecSuccOut
Earlier than
V100R003C00
1526727
006
L.HHO.IntereNB.I
nterFreq.ExecSuccOut
Earlier than
V100R003C00
1526728
285
L.HHO.Prep.FailO
ut.MME
V100R003C00
1526728
286
L.HHO.Prep.FailO
ut.NoReply
V100R003C00
1526728
287
L.HHO.Prep.FailO
ut.PrepFailure
V100R003C00
1526728
288
L.HHO.Prep.FailO
ut.HOCancel
V100R003C00
1526728
229
L.HHO.BlindHO.P
repAttOut
V100R003C00
256
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1526728
230
L.HHO.BlindHO.E
xecAttOut
V100R003C00
1526728
231
L.HHO.BlindHO.E
xecSuccOut
V100R003C00
Counter Name
Description
1526726995
L.HHO.IntraeNB.IntraFreq.
PrepAttOut
1526726998
L.HHO.IntraeNB.InterFreq.
PrepAttOut
Description
The counters measure the number of intra-eNodeB intra-frequency or intra-eNodeB interfrequency outgoing handover attempts in a cell. The source cell and target cell of such a handover
are controlled by the same eNodeB. When the source cell and target cell work at the same
frequency, the handover is called intra-frequency handover. When the source cell and target cell
work at different frequencies, the handover is called inter-frequency handover.
Measurement Point
During a handover where the source cell and target cell are controlled by the same eNodeB, as
shown in point A in Figure 1-92, the corresponding counter is incremented by 1 each time the
eNodeB decides to perform an intra-eNodeB outgoing handover after receiving a Measurement
Report message from the UE. The counters are measured as follows:
If the source cell and target cell work at the same frequency, the
L.HHO.IntraeNB.IntraFreq.PrepAttOut counter is incremented by 1.
If the source cell and target cell work at different frequencies, the
L.HHO.IntraeNB.InterFreq.PrepAttOut counter is incremented by 1.
Issue 06 (2011-09-30)
257
eNodeB
Performance Counter Reference
Figure 1-92
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.IntraeNB.IntraFr
eq.PrepAttOut
LBFD-00201801
TDLBFD-00201801
LBFD-00201802
TDLBFD-00201802
Issue 06 (2011-09-30)
258
eNodeB
Performance Counter Reference
Counter Name
Description
1526726996
L.HHO.IntraeNB.IntraFreq.
ExecAttOut
1526726999
L.HHO.IntraeNB.InterFreq.
ExecAttOut
Description
The counters measure the number of performed intra-eNodeB intra-frequency or intra-eNodeB
inter-frequency handovers in a cell. The source cell and target cell of such a handover are
controlled by the same eNodeB. When the source cell and target cell work at the same frequency,
the handover is called intra-frequency handover. When the source cell and target cell work at
different frequencies, the handover is called inter-frequency handover.
Measurement Point
During a handover where the source cell and target cell are controlled by the same eNodeB, as
shown in point B in Figure 1-93, the corresponding counter is incremented by 1 each time the
eNodeB sends an RRC Connection Reconfiguration message to the UE. The counters are
measured as follows:
If the source cell and target cell work at the same frequency, the
L.HHO.IntraeNB.IntraFreq.ExecAttOut counter is incremented by 1.
If the source cell and target cell work at different frequencies, the
L.HHO.IntraeNB.InterFreq.ExecAttOut counter is incremented by 1.
Figure 1-93
Issue 06 (2011-09-30)
259
eNodeB
Performance Counter Reference
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.IntraeNB.IntraFr
eq.ExecAttOut
LBFD-00201801
TDLBFD-00201801
LBFD-00201802
TDLBFD-00201802
Counter Name
Description
1526726997
L.HHO.IntraeNB.IntraFreq.
ExecSuccOut
1526727000
L.HHO.IntraeNB.InterFreq.
ExecSuccOut
Description
The counters measure the number of successful intra-eNodeB intra-frequency or intra-eNodeB
inter-frequency handovers in a cell. The source cell and target cell of such a handover are
controlled by the same eNodeB. When the source cell and target cell work on the same frequency,
the handover is called intra-frequency handover. When the source cell and target cell work on
different frequencies, the handover is called inter-frequency handover.
Measurement Point
During an intra-eNodeB handover, as shown in point C in Figure 1-94, the corresponding
counter is incremented by 1 each time data in the buffer is forwarded during the handover after
the target cell receives an RRC Connection Reconfiguration Complete message from the UE.
Issue 06 (2011-09-30)
260
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
261
eNodeB
Performance Counter Reference
Figure 1-95
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.IntraeNB.IntraFr
eq.ExecSuccOut
LBFD-00201801
TDLBFD-00201801
LBFD-00201802
TDLBFD-00201802
Issue 06 (2011-09-30)
262
eNodeB
Performance Counter Reference
Counter Name
Description
1526727001
L.HHO.IntereNB.IntraFreq.
PrepAttOut
1526727004
L.HHO.IntereNB.InterFreq.
PrepAttOut
Description
The counters measure the number of inter-eNodeB intra-frequency or inter-eNodeB interfrequency outgoing handover attempts in a cell. The source cell and target cell of an intereNodeB handover are controlled by different eNodeBs and such a handover is performed
between different eNodeBs over the S1 or X2 interface. When the source cell and target cell
work on the same frequency, the handover is called intra-frequency handover. When the source
cell and target cell work on different frequencies, the handover is called inter-frequency
handover.
Measurement Point
Figure 1-96 shows a handover over the X2 interface. Figure 1-97 shows a handover over the
S1 interface. During such a handover where the source cell and target cell are controlled by
different eNodeBs, as shown in point A in Figure 1-96 or Figure 1-97, the corresponding counter
is incremented by 1 each time the source eNodeB decides to perform an inter-eNodeB handover
after receiving a Measurement Report message from the UE. The counters are measured as
follows:
If the source cell and target cell work on the same frequency, the
L.HHO.IntereNB.IntraFreq.PrepAttOut counter is incremented by 1.
If the source cell and target cell work on different frequencies, the
L.HHO.IntereNB.InterFreq.PrepAttOut counter is incremented by 1.
Issue 06 (2011-09-30)
263
eNodeB
Performance Counter Reference
Figure 1-96
Issue 06 (2011-09-30)
264
eNodeB
Performance Counter Reference
Figure 1-97
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.IntereNB.IntraFr
eq.PrepAttOut
LBFD-00201801
TDLBFD-00201801
LBFD-00201802
TDLBFD-00201802
Issue 06 (2011-09-30)
265
eNodeB
Performance Counter Reference
Counter Name
Description
1526727002
L.HHO.IntereNB.IntraFreq.
ExecAttOut
1526727005
L.HHO.IntereNB.InterFreq.
ExecAttOut
Description
The counters measure the number of performed inter-eNodeB intra-frequency or inter-eNodeB
inter-frequency handovers in a cell. The source cell and target cell of an inter-eNodeB handover
are controlled by different eNodeBs and such a handover is performed between different
eNodeBs over the S1 or X2 interface. When the source cell and target cell work on the same
frequency, the handover is called intra-frequency handover. When the source cell and target cell
work on different frequencies, the handover is called inter-frequency handover.
Measurement Point
Figure 1-98 shows a handover over the X2 interface. Figure 1-99 shows a handover over the
S1 interface. During such a handover where the source cell and target cell are controlled by
different eNodeBs, as shown in point B in Figure 1-98 or Figure 1-99, the corresponding counter
is incremented by 1 each time the source eNodeB sends an RRC Connection Reconfiguration
message to the UE after receiving a HANDOVER REQUEST ACKNOWLEDGE message from
the target eNodeB or receiving a HANDOVER COMMAND message from the MME. The
counters are measured as follows:
If the source cell and target cell work on the same frequency, the
L.HHO.IntereNB.IntraFreq.ExecAttOut counter is incremented by 1.
If the source cell and target cell work on different frequencies, the
L.HHO.IntereNB.InterFreq.ExecAttOut counter is incremented by 1.
Issue 06 (2011-09-30)
266
eNodeB
Performance Counter Reference
Figure 1-98
Issue 06 (2011-09-30)
267
eNodeB
Performance Counter Reference
Figure 1-99
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.IntereNB.IntraFr
eq.ExecAttOut
LBFD-00201801
TDLBFD-00201801
LBFD-00201802
TDLBFD-00201802
Issue 06 (2011-09-30)
268
eNodeB
Performance Counter Reference
Counter Name
Description
1526727003
L.HHO.IntereNB.IntraFreq.
ExecSuccOut
1526727006
L.HHO.IntereNB.InterFreq.
ExecSuccOut
Description
The counters measure the number of successful inter-eNodeB intra-frequency or inter-eNodeB
inter-frequency handovers in a cell. The source cell and target cell of an inter-eNodeB handover
are controlled by different eNodeBs and such a handover is performed between different
eNodeBs over the S1 or X2 interface. When the source cell and target cell work on the same
frequency, the handover is called intra-frequency handover. When the source cell and target cell
work on different frequencies, the handover is called inter-frequency handover.
Measurement Point
During a handover over the X2 interface, as shown in point C Figure 1-100, the corresponding
counter is incremented by 1 each time data in the buffer is forwarded during the handover after
the source eNodeB receives a UE CONTEXT RELEASE message from the target eNodeB.
When the UE is successfully handed over to the target eNodeB during a handover over the X2
interface, as shown in point C in Figure 1-101, the corresponding counter is incremented by 1
each time data in the buffer is forwarded during the handover after the source eNodeB receives
a UE CONTEXT RELEASE message from the target eNodeB. During a handover over the S1
interface, as shown in point C in Figure 1-102, the corresponding counter is incremented by 1
each time data in the buffer is forwarded during the handover after the source eNodeB receives
a UE CONTEXT RELEASE COMMAND message from the MME. When the UE is
successfully handed over to the target eNodeB during a handover over the S1 interface, the
corresponding counter is incremented by 1 each time data in the buffer is forwarded during the
handover after the source eNodeB receives a UE CONTEXT RELEASE COMMAND message
from the MME. The counters are measured as follows:
If the source cell and target cell work on the same frequency, the
L.HHO.IntereNB.IntraFreq.ExecSuccOut counter is incremented by 1.
If the source cell and target cell work on different frequencies, the
L.HHO.IntereNB.InterFreq.ExecSuccOut counter is incremented by 1.
Issue 06 (2011-09-30)
269
eNodeB
Performance Counter Reference
Figure 1-100
Issue 06 (2011-09-30)
270
eNodeB
Performance Counter Reference
Figure 1-101
Issue 06 (2011-09-30)
271
eNodeB
Performance Counter Reference
Figure 1-102
Issue 06 (2011-09-30)
272
eNodeB
Performance Counter Reference
Figure 1-103
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.IntereNB.IntraFr
eq.ExecSuccOut
LBFD-00201801
TDLBFD-00201801
Issue 06 (2011-09-30)
273
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.HHO.IntereNB.InterFr
eq.ExecSuccOut
LBFD-00201802
TDLBFD-00201802
Counter Name
Description
1526728285
L.HHO.Prep.FailOut.MME
1526728286
L.HHO.Prep.FailOut.NoReply
1526728287
L.HHO.Prep.FailOut.PrepFailure
1526728288
L.HHO.Prep.FailOut.HOCancel
Description
The counters measure the number of outgoing handover failures due to different causes in a cell.
The outgoing handover failures are caused during handover preparation due to faults in the EPC,
no responses from the target cell, handover preparation failures at the target cell, or handover
cancellation messages sent by the source cell. Handover preparation is the procedure to prepare
handover resources between the handover decision and the handover execution.
Measurement Point
During handover preparation in a handover over the S1 or X2 interface, as shown in point B in
Figure 1-104 or Figure 1-105, the L.HHO.Prep.FailOut.MME counter is incremented by 1 each
time the source eNodeB receives a UE CONTEXT RELEASE COMMAND message from the
MME.
After the handover preparation in a handover over the S1 or X2 interface is complete, as shown
in point B in Figure 1-106 or Figure 1-107, if the source eNodeB does not receive any messages
from the target and does not cancel the handover, the L.HHO.Prep.FailOut.NoReply counter is
incremented as follows: During the handover over the X2 interface, the
L.HHO.Prep.FailOut.NoReply counter is incremented by 1 each time the source eNodeB does
not receive a HANDOVER REQUEST ACKNOWLEDEG message or a HANDOVER
PREPARATION FAILURE message from the target eNodeB. During the handover over the S1
Issue 06 (2011-09-30)
274
eNodeB
Performance Counter Reference
interface, the counter is incremented by 1 each time the source eNodeB does not receive a
HANDOVER COMMAND message or a HANDOVER PREPARATION FAILURE message
from the MME.
During handover preparation in a handover over the X2 interface, as shown in point B in Figure
1-109, the L.HHO.Prep.FailOut.PrepFailure counter is incremented by 1 each time the source
eNodeB receives a HANDOVER PREPARATION FAILURE message from the target eNodeB.
During handover preparation in a handover over the S1 interface, the
L.HHO.Prep.FailOut.PrepFailure counter is incremented by 1 each time the source eNodeB
receives a HANDOVER PREPARATION FAILURE message from the MME.
During the handover over the S1 or X2 interface, as shown in point B in Figure 1-110 or Figure
1-111, the L.HHO.Prep.FailOut.HOCancel counter is incremented by 1 each time the source
eNodeB decides to cancel the handover and sends a HANDOVER CANCEL message to the
MME or target eNodeB.
Figure 1-104
Issue 06 (2011-09-30)
275
eNodeB
Performance Counter Reference
Figure 1-105
Figure 1-106
Issue 06 (2011-09-30)
276
eNodeB
Performance Counter Reference
Figure 1-107
Figure 1-108
Issue 06 (2011-09-30)
277
eNodeB
Performance Counter Reference
Figure 1-109
Figure 1-110
Issue 06 (2011-09-30)
278
eNodeB
Performance Counter Reference
Figure 1-111
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.Prep.FailOut.M
ME
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
L.HHO.Prep.FailOut.No
Reply
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Issue 06 (2011-09-30)
279
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.HHO.Prep.FailOut.Pre
pFailure
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
L.HHO.Prep.FailOut.HO
Cancel
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Counter Name
Description
1526728229
L.HHO.BlindHO.PrepAttOut
Description
The counter measures the number of outgoing blind handover attempts in a cell. Not triggered
on the basis of UE measurement reports, the blind handover is a handover in which the eNodeB
specifies the target cell for the UE. It is generally performed under specific scenarios. For
example, a blind handover is triggered when the source cell is overloaded.
Measurement Point
As shown in point A in Figure 1-112, Figure 1-113, or Figure 1-114, the
L.HHO.BlindHO.PrepAttOut counter is incremented each time the eNodeB decides to perform
a blind handover. Figure 1-112 shows an intra-eNodeB blind handover, Figure 1-113 shows a
blind handover over the X2 interface, and Figure 1-114 shows a blind handover over the S1
interface.
Issue 06 (2011-09-30)
280
eNodeB
Performance Counter Reference
Figure 1-112
Figure 1-113
Issue 06 (2011-09-30)
281
eNodeB
Performance Counter Reference
Figure 1-114
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.BlindHO.PrepAttOut
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Issue 06 (2011-09-30)
282
eNodeB
Performance Counter Reference
Counter Name
Description
1526728230
L.HHO.BlindHO.ExecAttOut
Description
The counter measures the number of executed outgoing blind handovers in a cell. Not triggered
on the basis of UE measurement reports, the blind handover is a handover in which the eNodeB
specifies the target cell for the UE. It is generally performed under specific scenarios. For
example, a blind handover is triggered when the source cell is overloaded.
Measurement Point
As shown in point B in Figure 1-115, Figure 1-116, or Figure 1-117, the
L.HHO.BlindHO.ExecAttOut counter is incremented by 1 each time the eNodeB decides to
perform a blind handover and sends an RRC Connection Reconfiguration message to the UE.
Figure 1-115 shows an intra-eNodeB blind handover, Figure 1-116 shows a blind handover
over the X2 interface, and Figure 1-117 shows a blind handover over the S1 interface.
Figure 1-115
Issue 06 (2011-09-30)
283
eNodeB
Performance Counter Reference
Figure 1-116
Issue 06 (2011-09-30)
284
eNodeB
Performance Counter Reference
Figure 1-117
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.BlindHO.ExecAttOut
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Issue 06 (2011-09-30)
285
eNodeB
Performance Counter Reference
Counter Name
Description
1526728231
L.HHO.BlindHO.ExecSuccOut
Description
The counter measures the number of successful outgoing blind handovers in a cell. Not triggered
on the basis of UE measurement reports, the blind handover is a handover in which the eNodeB
specifies the target cell for the UE. It is generally performed under specific scenarios. For
example, a blind handover is triggered when the source cell is overloaded.
Measurement Point
As shown in point C in Figure 1-118, Figure 1-119, or Figure 1-120, the
L.HHO.BlindHO.ExecSuccOut counter is incremented each time the eNodeB decides to
perform a blind handover and the target cell receives an RRC Connection Reconfiguration
Complete message from the UE. Figure 1-118 shows an intra-eNodeB blind handover, Figure
1-119 shows a blind handover over the X2 interface, and Figure 1-120 shows a blind handover
over the S1 interface.
Figure 1-118
Issue 06 (2011-09-30)
286
eNodeB
Performance Counter Reference
Figure 1-119
Issue 06 (2011-09-30)
287
eNodeB
Performance Counter Reference
Figure 1-120
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.BlindHO.ExecSuccOut
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Issue 06 (2011-09-30)
288
eNodeB
Performance Counter Reference
Counter
The following table describes the counters contained in the "Incoming Handover Measurement
(Cell) (HO.eRAN.In.Cell)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
253
L.HHO.IntraeNB.P
repAttIn
Number of intra-eNodeB
incoming handover attempts in a
cell
Earlier than
V100R003C00
1526727
254
L.HHO.IntraeNB.
ExecAttIn
Earlier than
V100R003C00
1526727
255
L.HHO.IntraeNB.
ExecSuccIn
Earlier than
V100R003C00
1526727
256
L.HHO.IntereNB.P
repAttIn
Number of inter-eNodeB
incoming handover attempts in a
cell
Earlier than
V100R003C00
1526727
257
L.HHO.IntereNB.E
xecAttIn
Earlier than
V100R003C00
1526727
258
L.HHO.IntereNB.E
xecSuccIn
Earlier than
V100R003C00
1526728
289
L.HHO.Prep.FailIn
.AdmitFail
V100R003C00
1526728
290
L.HHO.Prep.FailIn
.HOCancel
V100R003C00
289
eNodeB
Performance Counter Reference
Counter Name
Description
1526727253
L.HHO.IntraeNB.PrepAttIn
Description
The counter measures the number of intra-eNodeB incoming handover attempts in a cell. The
source cell and target cell of such a handover are controlled by the same eNodeB.
Measurement Point
During a handover where the source cell and target cell are controlled by the same eNodeB, as
shown in point A in Figure 1-121, the counter is incremented by 1 in the target cell each time
the eNodeB decides to perform an intra-eNodeB incoming handover after receiving a
Measurement Report message from the UE.
Figure 1-121
Formula
None
Issue 06 (2011-09-30)
290
eNodeB
Performance Counter Reference
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.IntraeNB.PrepAttIn
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Counter Name
Description
1526727254
L.HHO.IntraeNB.ExecAttIn
Description
The counter measures the number of performed intra-eNodeB incoming handovers in a cell. The
source cell and target cell of such a handover are controlled by the same eNodeB.
Measurement Point
During a handover where the source cell and target cell are controlled by the same eNodeB, as
shown in point B in Figure 1-122, the counter is incremented by 1 in the target cell each time
the eNodeB sends an RRC Connection Reconfiguration message to the UE.
Issue 06 (2011-09-30)
291
eNodeB
Performance Counter Reference
Figure 1-122
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.IntraeNB.ExecAttIn
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Issue 06 (2011-09-30)
292
eNodeB
Performance Counter Reference
Counter Name
Description
1526727255
L.HHO.IntraeNB.ExecSuccIn
Description
The counter measures the number of successful intra-eNodeB incoming handovers in a cell. The
source cell and target cell of such a handover are controlled by the same eNodeB.
Measurement Point
During a handover where the source cell and target cell are controlled by the same eNodeB, as
shown in point C in Figure 1-123 or Figure 1-124, the counter is incremented by 1 in the target
cell each time the eNodeB receives an RRC Connection Reconfiguration Complete message
from the UE and the subsequent operations are successful or the eNodeB receives an RRC
Connection Reestablishment Complete message from the UE and the subsequent
reestablishment operations are successful.
Figure 1-123
Issue 06 (2011-09-30)
293
eNodeB
Performance Counter Reference
Figure 1-124
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.IntraeNB.ExecSuccIn
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Issue 06 (2011-09-30)
294
eNodeB
Performance Counter Reference
Counter Name
Description
1526727256
L.HHO.IntereNB.PrepAttIn
Description
The counter measures the number of inter-eNodeB incoming handover attempts in a cell. The
source cell and target cell of an inter-eNodeB handover are controlled by different eNodeBs and
such a handover is performed between different eNodeBs over the S1 or X2 interface.
Measurement Point
The source cell and target cell of an inter-eNodeB handover are controlled by different eNodeBs.
Figure 1-125 shows a handover over the X2 interface, and Figure 1-126 shows a handover over
the S1 interface. As shown in point A in Figure 1-125 or Figure 1-126, the counter is
incremented by 1 in the target cell each time the target eNodeB receives a HANDOVER
REQUEST message from the source eNodeB over the X2 interface or from the MME over the
S1 interface.
Figure 1-125
Issue 06 (2011-09-30)
295
eNodeB
Performance Counter Reference
Figure 1-126
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.IntereNB.PrepAttIn
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Issue 06 (2011-09-30)
296
eNodeB
Performance Counter Reference
Counter Name
Description
1526727257
L.HHO.IntereNB.ExecAttIn
Description
The counter measures the number of performed inter-eNodeB incoming handovers in a cell. The
source cell and target cell of an inter-eNodeB handover are controlled by different eNodeBs and
such a handover is performed between different eNodeBs over the S1 or X2 interface.
Measurement Point
The source cell and target cell of an inter-eNodeB handover are controlled by different eNodeBs.
Figure 1-127 shows a handover over the X2 interface, and Figure 1-128 shows a handover over
the S1 interface. As shown in point B in Figure 1-127 or Figure 1-128, the counter is
incremented by 1 in the target cell each time the target eNodeB sends a HANDOVER REQUEST
ACKNOWLEDGE message to the source eNodeB over the X2 interface or to the MME over
the S1 interface.
Figure 1-127
Issue 06 (2011-09-30)
297
eNodeB
Performance Counter Reference
Figure 1-128
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.IntereNB.ExecAttIn
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Issue 06 (2011-09-30)
298
eNodeB
Performance Counter Reference
Counter Name
Description
1526727258
L.HHO.IntereNB.ExecSuccIn
Description
The counter measures the number of successful inter-eNodeB incoming handovers in a cell. The
source cell and target cell of an inter-eNodeB handover are controlled by different eNodeBs and
such a handover is performed between different eNodeBs over the S1 or X2 interface.
Measurement Point
The source cell and target cell of an inter-eNodeB handover are controlled by different eNodeBs.
Figure 1-129 shows a handover over the X2 interface, and Figure 1-130 shows a handover over
the S1 interface. As shown in point C in Figure 1-129 or Figure 1-130, the counter is
incremented by 1 in the target cell each time the target eNodeB sends a UE CONTEXT
RELEASE message to the source eNodeB over the X2 interface after receiving a PATH
SWITCH REQUEST ACKNOWLEDGE message from the MME or the target eNodeB sends
a HANDOVER NOTIFY message to the MME over the S1 interface.
Figure 1-129
Issue 06 (2011-09-30)
299
eNodeB
Performance Counter Reference
Figure 1-130
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.IntereNB.ExecSuccIn
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Issue 06 (2011-09-30)
300
eNodeB
Performance Counter Reference
Counter Name
Description
1526728289
L.HHO.Prep.FailIn.AdmitFail
1526728290
L.HHO.Prep.FailIn.HOCancel
Description
The counters measure the number of incoming handover failures due to different causes in a
cell. The incoming handover failures are caused during handover preparation due to failures of
resource preparation or handover cancellation messages sent by the source cell. Handover
preparation is the procedure to prepare handover resources between the handover decision and
the handover execution.
Measurement Point
During handover preparation in a handover over the S1 or X2 interface, as shown in point B in
Figure 1-131 or Figure 1-132, the target eNodeB receives a HANDOVER REQUEST message
from the source eNodeB over the S1 or X2 interface. The L.HHO.Prep.FailIn.AdmitFail counter
is incremented by 1 in the target cell each time the handover fails due to admission failure in the
target cell and the target eNodeB sends a HANDOVER FAILURE message to the MME over
the S1 interface. The L.HHO.Prep.FailIn.AdmitFail counter is also incremented by 1 in the target
cell each time the handover fails due to admission failure in the target cell and the target eNodeB
sends a HANDOVER PREPARATION FAILURE message to the source eNodeB over the X2
interface.
During the handover over the S1 interface, as shown in point B in Figure 1-133, the
L.HHO.Prep.FailIn.HOCancel counter is incremented by 1 each time the target eNodeB receives
a UE CONTEXT RELEASE COMMAND message with the Release Cause information element
of Handover Cancelled from the MME.
During the handover over the X2 interface, as shown in point B in Figure 1-134, the
L.HHO.Prep.FailIn.HOCancel counter is incremented by 1 in the target cell each time the target
eNodeB receives a HANDOVER CANCEL message from the source eNodeB.
Issue 06 (2011-09-30)
301
eNodeB
Performance Counter Reference
Figure 1-131
Figure 1-132
Issue 06 (2011-09-30)
302
eNodeB
Performance Counter Reference
Figure 1-133
Figure 1-134
Formula
None
Issue 06 (2011-09-30)
303
eNodeB
Performance Counter Reference
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.Prep.FailIn.AdmitFail
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
L.HHO.Prep.FailIn.HOCancel
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Counter
The following table describes the counters contained in the "Measurement of Outgoing
Handovers over the X2 Interface (Cell) (HO.eRAN.X2Out.Cell)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
264
L.HHO.X2.IntraFr
eq.PrepAttOut
Earlier than
V100R003C00
304
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1526727
267
L.HHO.X2.InterFr
eq.PrepAttOut
Earlier than
V100R003C00
1526727
265
L.HHO.X2.IntraFr
eq.ExecAttOut
Earlier than
V100R003C00
1526727
268
L.HHO.X2.InterFr
eq.ExecAttOut
Earlier than
V100R003C00
1526727
266
L.HHO.X2.IntraFr
eq.ExecSuccOut
Earlier than
V100R003C00
1526727
269
L.HHO.X2.InterFr
eq.ExecSuccOut
Earlier than
V100R003C00
Counter Name
Description
1526727264
L.HHO.X2.IntraFreq.PrepAttOut
1526727267
L.HHO.X2.InterFreq.PrepAttOut
Description
The counters measure the number of inter-eNodeB intra-frequency or inter-eNodeB interfrequency outgoing handover attempts over the X2 interface in a cell.
Measurement Point
During a handover attempt over the X2 interface, the source cell and target cell are controlled
by different eNodeBs. As shown in point A in Figure 1-135, if the source cell and target cell
Issue 06 (2011-09-30)
305
eNodeB
Performance Counter Reference
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.X2.IntraFreq.Pre
pAttOut
LBFD-00201801
TDLBFD-00201801
306
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.HHO.X2.InterFreq.Pre
pAttOut
LBFD-00201802
TDLBFD-00201802
Counter Name
Description
1526727265
L.HHO.X2.IntraFreq.ExecAttOut
1526727268
L.HHO.X2.InterFreq.ExecAttOut
Description
The counters measure the number of performed inter-eNodeB intra-frequency or inter-eNodeB
inter-frequency outgoing handovers over the X2 interface in a cell.
Measurement Point
During a handover over the X2 interface, the source cell and target cell of the handover are
controlled by different eNodeBs. As shown in point B in Figure 1-136, during a handover where
the source cell and target cell are at the same frequency, the L.HHO.X2.IntraFreq.ExecAttOut
counter is incremented by 1 in the source cell each time the source eNodeB sends an RRC
Connection Reconfiguration message to the UE after receiving a HANDOVER REQUEST
ACKNOWLEDGE message from the target eNodeB. If the source cell and target cell are at
different frequencies, the L.HHO.X2.InterFreq.ExecAttOut counter is incremented by 1
accordingly.
Issue 06 (2011-09-30)
307
eNodeB
Performance Counter Reference
Figure 1-136
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.X2.IntraFreq.ExecAttOut
LBFD-00201801
TDLBFD-00201801
LBFD-00201802
TDLBFD-00201802
Issue 06 (2011-09-30)
308
eNodeB
Performance Counter Reference
Counter Name
Description
1526727266
L.HHO.X2.IntraFreq.ExecSuccOut
1526727269
L.HHO.X2.InterFreq.ExecSuccOut
Description
The counters measure the number of successful inter-eNodeB intra-frequency or inter-eNodeB
inter-frequency outgoing handovers over the X2 interface in a cell.
Measurement Point
During a handover over the X2 interface, the source cell and target cell of the handover are
controlled by different eNodeBs. As shown in point C in Figure 1-137 or Figure 1-138, during
a handover over the X2 interface where the source cell and target cell are at the same frequency,
the L.HHO.X2.IntraFreq.ExecSuccOut counter is incremented by 1 in the source cell each time
the source eNodeB successfully performs a handover to the target eNodeB after receiving a UE
CONTEXT RELEASE message from the target eNodeB. If the source cell and target cell are at
different frequencies, the L.HHO.X2.InterFreq.ExecSuccOut counter is incremented by 1
accordingly.
Issue 06 (2011-09-30)
309
eNodeB
Performance Counter Reference
Figure 1-137
Issue 06 (2011-09-30)
310
eNodeB
Performance Counter Reference
Figure 1-138
Formula
None
Unit
times
Issue 06 (2011-09-30)
311
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.X2.IntraFreq.ExecSuccOut
LBFD-00201801
TDLBFD-00201801
LBFD-00201802
TDLBFD-00201802
Counter
The following table describes the counters contained in the "DRX Outgoing Handover
Measurement (Cell) (HO.DRX.Out.Cell)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
285
L.HHO.DRX.Intra
eNB.IntraFreq.ExecAttOut
Earlier than
V100R003C00
1526727
287
L.HHO.DRX.Intra
eNB.InterFreq.ExecAttOut
Earlier than
V100R003C00
1526727
286
L.HHO.DRX.Intra
eNB.IntraFreq.ExecSuccOut
Earlier than
V100R003C00
1526727
288
L.HHO.DRX.Intra
eNB.InterFreq.ExecSuccOut
Earlier than
V100R003C00
312
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1526727
289
L.HHO.DRX.Inter
eNB.IntraFreq.ExecAttOut
Earlier than
V100R003C00
1526727
291
L.HHO.DRX.Inter
eNB.InterFreq.ExecAttOut
Earlier than
V100R003C00
1526727
290
L.HHO.DRX.Inter
eNB.IntraFreq.ExecSuccOut
Earlier than
V100R003C00
1526727
292
L.HHO.DRX.Inter
eNB.InterFreq.ExecSuccOut
Earlier than
V100R003C00
Counter Name
Description
1526727285
L.HHO.DRX.IntraeNB.Intra
Freq.ExecAttOut
1526727287
L.HHO.DRX.IntraeNB.Inter
Freq.ExecAttOut
Description
The counters measure the number of performed intra-eNodeB intra-frequency and intra-eNodeB
inter-frequency outgoing handovers, respectively. The source cell and target cell of such a
handover are controlled by the same eNodeB and the UE enters the discontinuous reception
(DRX) state when the eNodeB decides to perform a handover.
Measurement Point
During a handover, the source cell and target cell are controlled by the same eNodeBs and the
UE enters the DRX state when the eNodeB decides to perform a handover. As shown in point
B in Figure 1-139, if the source cell and target cell work on the same frequency, the
L.HHO.DRX.IntraeNB.IntraFreq.ExecAttOut counter is incremented by 1 in the source cell
Issue 06 (2011-09-30)
313
eNodeB
Performance Counter Reference
each time the eNodeB sends an RRC Connection Reconfiguration message to the UE. If the
source cell and target cell work on different frequencies, the
L.HHO.DRX.IntraeNB.InterFreq.ExecAttOut counter is incremented by 1 accordingly.
Figure 1-139
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.DRX.IntraeNB.I
ntraFreq.ExecAttOut
LBFD-002017
DRX
LBFD-00201801
TDLBFD-002017
TDLBFD-00201801
DRX
Coverage Based Intra-frequency
Handover
Issue 06 (2011-09-30)
314
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.HHO.DRX.IntraeNB.I
nterFreq.ExecAttOut
LBFD-002017
DRX
LBFD-00201802
TDLBFD-002017
TDLBFD-00201802
DRX
Coverage Based Inter-frequency
Handover
Counter Name
Description
1526727286
L.HHO.DRX.IntraeNB.Intra
Freq.ExecSuccOut
1526727288
L.HHO.DRX.IntraeNB.Inter
Freq.ExecSuccOut
Description
The counters measure the number of successful intra-eNodeB intra-frequency and intra-eNodeB
inter-frequency outgoing handovers, respectively. The source cell and target cell of such a
handover are controlled by the same eNodeB and the UE enters the discontinuous reception
(DRX) state when the eNodeB decides to perform a handover.
Measurement Point
The source cell and target cell of such a handover are controlled by the same eNodeB and the
UE enters the DRX state when the eNodeB decides to perform a handover. As shown in point
C in Figure 1-140 or Figure 1-141, the corresponding counter is incremented by 1 each time
data in the buffer is forwarded during the handover after the eNodeB receives an RRC
Connection Reconfiguration Complete or RRC Connection Reestablishment Complete message
from the UE. If the source cell and target cell work on the same frequency, the
L.HHO.DRX.IntraeNB.IntraFreq.ExecSuccOut counter is incremented by 1 in the source cell.
If the source cell and target cell work on different frequencies, the
L.HHO.DRX.IntraeNB.InterFreq.ExecSuccOut counter is incremented by 1 in the source cell.
Issue 06 (2011-09-30)
315
eNodeB
Performance Counter Reference
Figure 1-140
Figure 1-141
Issue 06 (2011-09-30)
316
eNodeB
Performance Counter Reference
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.DRX.IntraeNB.I
ntraFreq.ExecSuccOut
LBFD-002017
DRX
LBFD-00201801
TDLBFD-002017
TDLBFD-00201801
DRX
Coverage Based Intra-frequency
Handover
L.HHO.DRX.IntraeNB.I
nterFreq.ExecSuccOut
LBFD-002017
DRX
LBFD-00201802
TDLBFD-002017
TDLBFD-00201802
DRX
Coverage Based Inter-frequency
Handover
Counter Name
Description
1526727289
L.HHO.DRX.IntereNB.Intra
Freq.ExecAttOut
1526727291
L.HHO.DRX.IntereNB.Inter
Freq.ExecAttOut
Description
The counters measure the number of performed inter-eNodeB intra-frequency and inter-eNodeB
inter-frequency outgoing handovers, respectively. The source cell and target cell of such a
handover are controlled by different eNodeBs and the UE enters the discontinuous reception
(DRX) state when the source eNodeB decides to perform a handover.
Issue 06 (2011-09-30)
317
eNodeB
Performance Counter Reference
Measurement Point
The source cell and target cell of an inter-eNodeB handover are controlled by different eNodeBs.
Figure 1-142 shows a handover over the X2 interface, and Figure 1-143 shows a handover over
the S1 interface. During such a handover, the UE enters the DRX state when the source eNodeB
decides to perform a handover. As shown in point B in Figure 1-142 or Figure 1-143, if the
source cell and target cell work on the same frequency, the
L.HHO.DRX.IntereNB.IntraFreq.ExecAttOut counter is incremented by 1 in the source cell
each time the source eNodeB sends an RRC Connection Reconfiguration message to the UE
after receiving a HANDOVER REQUEST ACKNOWLEDGE message from the target eNodeB
or receiving a HANDOVER COMMAND message from the MME. If the source cell and target
cell work on different frequencies, the L.HHO.DRX.IntereNB.InterFreq.ExecAttOut counter is
incremented by 1 accordingly.
Figure 1-142
Issue 06 (2011-09-30)
318
eNodeB
Performance Counter Reference
Figure 1-143
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.DRX.IntereNB.I
ntraFreq.ExecAttOut
LBFD-002017
DRX
LBFD-00201802
TDLBFD-002017
TDLBFD-00201802
DRX
Coverage Based Inter-frequency
Handover
Issue 06 (2011-09-30)
319
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.HHO.DRX.IntereNB.I
nterFreq.ExecAttOut
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Counter Name
Description
1526727290
L.HHO.DRX.IntereNB.Intra
Freq.ExecSuccOut
1526727292
L.HHO.DRX.IntereNB.Inter
Freq.ExecSuccOut
Description
The counters measure the number of successful inter-eNodeB intra-frequency and inter-eNodeB
inter-frequency outgoing handovers, respectively. The source cell and target cell of such a
handover are controlled by different eNodeBs and the UE enters the discontinuous reception
(DRX) state when the source eNodeB decides to perform a handover.
Measurement Point
The source cell and target cell of such a handover are controlled by different eNodeBs and the
UE enters the DRX state when the source eNodeB decides to perform a handover. Figure
1-144 shows a handover over the X2 interface, and Figure 1-145 shows a handover over the S1
interface. As shown in point C in Figure 1-144 or Figure 1-145, the corresponding counter is
incremented by 1 each time data in the buffer is forwarded during the handover after the source
eNodeB receives a UE CONTEXT RELEASE message from the target eNodeB or a UE
CONTEXT RELEASE COMMAND message from the MME. If the source cell and target cell
work on the same frequency, the L.HHO.DRX.IntereNB.IntraFreq.ExecSuccOut counter is
incremented by 1 in the source cell. If the source cell and target cell work on different frequencies,
the L.HHO.DRX.IntereNB.InterFreq.ExecSuccOut counter is incremented by 1 in the source
cell.
Issue 06 (2011-09-30)
320
eNodeB
Performance Counter Reference
Figure 1-144
Issue 06 (2011-09-30)
321
eNodeB
Performance Counter Reference
Figure 1-145
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.DRX.IntereNB.I
ntraFreq.ExecSuccOut
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Issue 06 (2011-09-30)
322
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.HHO.DRX.IntereNB.I
nterFreq.ExecSuccOut
LBFD-002017
DRX
LBFD-00201801
LBFD-00201802
TDLBFD-002017
TDLBFD-00201801
TDLBFD-00201802
Counter
The following table describes the counters contained in the "Packet Processing Measurement
(Cell) (Traffic.Packet.Cell)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
907
L.Traffic.DL.PktD
elay.Time.QCI.1
V100R003C00
1526727
910
L.Traffic.DL.PktD
elay.Time.QCI.2
V100R003C00
1526727
913
L.Traffic.DL.PktD
elay.Time.QCI.3
V100R003C00
1526727
916
L.Traffic.DL.PktD
elay.Time.QCI.4
V100R003C00
1526727
919
L.Traffic.DL.PktD
elay.Time.QCI.5
V100R003C00
323
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
922
L.Traffic.DL.PktD
elay.Time.QCI.6
V100R003C00
1526727
925
L.Traffic.DL.PktD
elay.Time.QCI.7
V100R003C00
1526727
928
L.Traffic.DL.PktD
elay.Time.QCI.8
V100R003C00
1526727
931
L.Traffic.DL.PktD
elay.Time.QCI.9
V100R003C00
1526727
934
L.Traffic.DL.PktU
uLoss.Loss.QCI.1
V100R003C00
1526727
937
L.Traffic.DL.PktU
uLoss.Loss.QCI.2
V100R003C00
1526727
940
L.Traffic.DL.PktU
uLoss.Loss.QCI.3
V100R003C00
1526727
943
L.Traffic.DL.PktU
uLoss.Loss.QCI.4
V100R003C00
1526727
946
L.Traffic.DL.PktU
uLoss.Loss.QCI.5
V100R003C00
1526727
949
L.Traffic.DL.PktU
uLoss.Loss.QCI.6
V100R003C00
1526727
952
L.Traffic.DL.PktU
uLoss.Loss.QCI.7
V100R003C00
1526727
955
L.Traffic.DL.PktU
uLoss.Loss.QCI.8
V100R003C00
1526727
958
L.Traffic.DL.PktU
uLoss.Loss.QCI.9
V100R003C00
324
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
935
L.Traffic.DL.PktU
uLoss.Tot.QCI.1
V100R003C00
1526727
938
L.Traffic.DL.PktU
uLoss.Tot.QCI.2
V100R003C00
1526727
941
L.Traffic.DL.PktU
uLoss.Tot.QCI.3
V100R003C00
1526727
944
L.Traffic.DL.PktU
uLoss.Tot.QCI.4
V100R003C00
1526727
947
L.Traffic.DL.PktU
uLoss.Tot.QCI.5
V100R003C00
1526727
950
L.Traffic.DL.PktU
uLoss.Tot.QCI.6
V100R003C00
1526727
953
L.Traffic.DL.PktU
uLoss.Tot.QCI.7
V100R003C00
1526727
956
L.Traffic.DL.PktU
uLoss.Tot.QCI.8
V100R003C00
1526727
959
L.Traffic.DL.PktU
uLoss.Tot.QCI.9
V100R003C00
1526727
961
L.Traffic.UL.PktL
oss.Loss.QCI.1
V100R003C00
1526727
964
L.Traffic.UL.PktL
oss.Loss.QCI.2
V100R003C00
1526727
967
L.Traffic.UL.PktL
oss.Loss.QCI.3
V100R003C00
1526727
970
L.Traffic.UL.PktL
oss.Loss.QCI.4
V100R003C00
325
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
973
L.Traffic.UL.PktL
oss.Loss.QCI.5
V100R003C00
1526727
976
L.Traffic.UL.PktL
oss.Loss.QCI.6
V100R003C00
1526727
979
L.Traffic.UL.PktL
oss.Loss.QCI.7
V100R003C00
1526727
982
L.Traffic.UL.PktL
oss.Loss.QCI.8
V100R003C00
1526727
985
L.Traffic.UL.PktL
oss.Loss.QCI.9
V100R003C00
1526727
962
L.Traffic.UL.PktL
oss.Tot.QCI.1
V100R003C00
1526727
965
L.Traffic.UL.PktL
oss.Tot.QCI.2
V100R003C00
1526727
968
L.Traffic.UL.PktL
oss.Tot.QCI.3
V100R003C00
1526727
971
L.Traffic.UL.PktL
oss.Tot.QCI.4
V100R003C00
1526727
974
L.Traffic.UL.PktL
oss.Tot.QCI.5
V100R003C00
1526727
977
L.Traffic.UL.PktL
oss.Tot.QCI.6
V100R003C00
1526727
980
L.Traffic.UL.PktL
oss.Tot.QCI.7
V100R003C00
1526727
983
L.Traffic.UL.PktL
oss.Tot.QCI.8
V100R003C00
326
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
986
L.Traffic.UL.PktL
oss.Tot.QCI.9
V100R003C00
1526727
908
L.Traffic.DL.PktD
elay.Num.QCI.1
Number of successfully
transmitted downlink traffic
PDCP SDUs for DRB services
with the QCI of 1 in a cell
V100R003C00
1526727
911
L.Traffic.DL.PktD
elay.Num.QCI.2
Number of successfully
transmitted downlink traffic
PDCP SDUs for DRB services
with the QCI of 2 in a cell
V100R003C00
1526727
914
L.Traffic.DL.PktD
elay.Num.QCI.3
Number of successfully
transmitted downlink traffic
PDCP SDUs for DRB services
with the QCI of 3 in a cell
V100R003C00
1526727
917
L.Traffic.DL.PktD
elay.Num.QCI.4
Number of successfully
transmitted downlink traffic
PDCP SDUs for DRB services
with the QCI of 4 in a cell
V100R003C00
1526727
920
L.Traffic.DL.PktD
elay.Num.QCI.5
Number of successfully
transmitted downlink traffic
PDCP SDUs for DRB services
with the QCI of 5 in a cell
V100R003C00
1526727
923
L.Traffic.DL.PktD
elay.Num.QCI.6
Number of successfully
transmitted downlink traffic
PDCP SDUs for DRB services
with the QCI of 6 in a cell
V100R003C00
1526727
926
L.Traffic.DL.PktD
elay.Num.QCI.7
Number of successfully
transmitted downlink traffic
PDCP SDUs for DRB services
with the QCI of 7 in a cell
V100R003C00
1526727
929
L.Traffic.DL.PktD
elay.Num.QCI.8
Number of successfully
transmitted downlink traffic
PDCP SDUs for DRB services
with the QCI of 8 in a cell
V100R003C00
1526727
932
L.Traffic.DL.PktD
elay.Num.QCI.9
Number of successfully
transmitted downlink traffic
PDCP SDUs for DRB services
with the QCI of 9 in a cell
V100R003C00
327
eNodeB
Performance Counter Reference
1.1.27.1 Processing Delay of Downlink PDCP SDUs for DRB Services in a Cell
Counter
Counter ID
Counter Name
Description
1526727907
L.Traffic.DL.PktDelay.Time
.QCI.1
1526727910
L.Traffic.DL.PktDelay.Time
.QCI.2
1526727913
L.Traffic.DL.PktDelay.Time
.QCI.3
1526727916
L.Traffic.DL.PktDelay.Time
.QCI.4
1526727919
L.Traffic.DL.PktDelay.Time
.QCI.5
1526727922
L.Traffic.DL.PktDelay.Time
.QCI.6
1526727925
L.Traffic.DL.PktDelay.Time
.QCI.7
1526727928
L.Traffic.DL.PktDelay.Time
.QCI.8
1526727931
L.Traffic.DL.PktDelay.Time
.QCI.9
Description
The counters measure the processing delay of downlink PDCP SDUs for DRB services with a
specific QCI ranging from 1 to 9 in a cell.
Measurement Point
The processing delay of downlink PDCP SDUs for DRB services with a specific QCI ranging
from 1 to 9 is sampled in a cell. At the end of a measurement period, the sum of these sampling
results is used as the value of the corresponding counter.
Formula
None
Unit
ms
Issue 06 (2011-09-30)
328
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.DL.PktDelay.T
ime.QCI.1
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.Traffic.DL.PktDelay.T
ime.QCI.2
L.Traffic.DL.PktDelay.T
ime.QCI.3
L.Traffic.DL.PktDelay.T
ime.QCI.4
L.Traffic.DL.PktDelay.T
ime.QCI.5
L.Traffic.DL.PktDelay.T
ime.QCI.6
L.Traffic.DL.PktDelay.T
ime.QCI.7
L.Traffic.DL.PktDelay.T
ime.QCI.8
Issue 06 (2011-09-30)
329
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.Traffic.DL.PktDelay.T
ime.QCI.9
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
1.1.27.2 Number of Discarded Downlink Traffic PDCP SDUs for DRB Services in
a Cell
Counter
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727934
L.Traffic.DL.PktUuLoss.Lo
ss.QCI.1
1526727937
L.Traffic.DL.PktUuLoss.Lo
ss.QCI.2
1526727940
L.Traffic.DL.PktUuLoss.Lo
ss.QCI.3
1526727943
L.Traffic.DL.PktUuLoss.Lo
ss.QCI.4
1526727946
L.Traffic.DL.PktUuLoss.Lo
ss.QCI.5
1526727949
L.Traffic.DL.PktUuLoss.Lo
ss.QCI.6
1526727952
L.Traffic.DL.PktUuLoss.Lo
ss.QCI.7
1526727955
L.Traffic.DL.PktUuLoss.Lo
ss.QCI.8
1526727958
L.Traffic.DL.PktUuLoss.Lo
ss.QCI.9
330
eNodeB
Performance Counter Reference
Description
The counters measure the number of discarded downlink traffic PDCP SDUs for DRB services
with a specific QCI ranging from 1 to 9 in a cell.
Measurement Point
The number of discarded downlink traffic PDCP SDUs for DRB services with a specific QCI
ranging from 1 to 9 is sampled per second. At the end of a measurement period, the sum of these
sampling results is used as the value of the corresponding counter.
Formula
None
Unit
packet
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.DL.PktUuLoss.
Loss.QCI.1
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.Traffic.DL.PktUuLoss.
Loss.QCI.2
L.Traffic.DL.PktUuLoss.
Loss.QCI.3
L.Traffic.DL.PktUuLoss.
Loss.QCI.4
L.Traffic.DL.PktUuLoss.
Loss.QCI.5
Issue 06 (2011-09-30)
331
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.Traffic.DL.PktUuLoss.
Loss.QCI.6
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.Traffic.DL.PktUuLoss.
Loss.QCI.7
L.Traffic.DL.PktUuLoss.
Loss.QCI.8
L.Traffic.DL.PktUuLoss.
Loss.QCI.9
1.1.27.3 Number of Transmitted Downlink Traffic PDCP SDUs for DRB Services
in a Cell
Counter
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727935
L.Traffic.DL.PktUuLoss.Tot
.QCI.1
1526727938
L.Traffic.DL.PktUuLoss.Tot
.QCI.2
1526727941
L.Traffic.DL.PktUuLoss.Tot
.QCI.3
1526727944
L.Traffic.DL.PktUuLoss.Tot
.QCI.4
1526727947
L.Traffic.DL.PktUuLoss.Tot
.QCI.5
332
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1526727950
L.Traffic.DL.PktUuLoss.Tot
.QCI.6
1526727953
L.Traffic.DL.PktUuLoss.Tot
.QCI.7
1526727956
L.Traffic.DL.PktUuLoss.Tot
.QCI.8
1526727959
L.Traffic.DL.PktUuLoss.Tot
.QCI.9
Description
The counters measure the number of transmitted downlink traffic PDCP SDUs for DRB services
with a specific QCI ranging from 1 to 9 in a cell.
Measurement Point
The number of transmitted downlink traffic PDCP SDUs for DRB services with a specific QCI
ranging from 1 to 9 is sampled per second. At the end of a measurement period, the sum of these
sampling results is used as the value of the corresponding counter.
Formula
None
Unit
packet
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.DL.PktUuLoss.
Tot.QCI.1
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.Traffic.DL.PktUuLoss.
Tot.QCI.2
Issue 06 (2011-09-30)
333
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.Traffic.DL.PktUuLoss.
Tot.QCI.3
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.Traffic.DL.PktUuLoss.
Tot.QCI.4
L.Traffic.DL.PktUuLoss.
Tot.QCI.5
L.Traffic.DL.PktUuLoss.
Tot.QCI.6
L.Traffic.DL.PktUuLoss.
Tot.QCI.7
L.Traffic.DL.PktUuLoss.
Tot.QCI.8
L.Traffic.DL.PktUuLoss.
Tot.QCI.9
Issue 06 (2011-09-30)
334
eNodeB
Performance Counter Reference
1.1.27.4 Number of Discarded Uplink Traffic PDCP SDUs for DRB Services in a
Cell
Counter
Counter ID
Counter Name
Description
1526727961
L.Traffic.UL.PktLoss.Loss.
QCI.1
1526727964
L.Traffic.UL.PktLoss.Loss.
QCI.2
1526727967
L.Traffic.UL.PktLoss.Loss.
QCI.3
1526727970
L.Traffic.UL.PktLoss.Loss.
QCI.4
1526727973
L.Traffic.UL.PktLoss.Loss.
QCI.5
1526727976
L.Traffic.UL.PktLoss.Loss.
QCI.6
1526727979
L.Traffic.UL.PktLoss.Loss.
QCI.7
1526727982
L.Traffic.UL.PktLoss.Loss.
QCI.8
1526727985
L.Traffic.UL.PktLoss.Loss.
QCI.9
Description
The counters measure the number of discarded uplink traffic PDCP SDUs for DRB services
with a specific QCI ranging from 1 to 9 in a cell.
Measurement Point
The number of discarded uplink traffic PDCP SDUs for DRB services with a specific QCI
ranging from 1 to 9 is sampled per second. At the end of a measurement period, the sum of these
sampling results is used as the value of the corresponding counter.
Issue 06 (2011-09-30)
335
eNodeB
Performance Counter Reference
Formula
None
Unit
packet
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.UL.PktLoss.Lo
ss.QCI.1
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.Traffic.UL.PktLoss.Lo
ss.QCI.2
L.Traffic.UL.PktLoss.Lo
ss.QCI.3
L.Traffic.UL.PktLoss.Lo
ss.QCI.4
L.Traffic.UL.PktLoss.Lo
ss.QCI.5
L.Traffic.UL.PktLoss.Lo
ss.QCI.6
L.Traffic.UL.PktLoss.Lo
ss.QCI.7
Issue 06 (2011-09-30)
336
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.Traffic.UL.PktLoss.Lo
ss.QCI.8
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.Traffic.UL.PktLoss.Lo
ss.QCI.9
1.1.27.5 Number of Expected Uplink Traffic Data Packets for DRB Services in a Cell
Counter
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727962
L.Traffic.UL.PktLoss.Tot.Q
CI.1
1526727965
L.Traffic.UL.PktLoss.Tot.Q
CI.2
1526727968
L.Traffic.UL.PktLoss.Tot.Q
CI.3
1526727971
L.Traffic.UL.PktLoss.Tot.Q
CI.4
1526727974
L.Traffic.UL.PktLoss.Tot.Q
CI.5
1526727977
L.Traffic.UL.PktLoss.Tot.Q
CI.6
1526727980
L.Traffic.UL.PktLoss.Tot.Q
CI.7
1526727983
L.Traffic.UL.PktLoss.Tot.Q
CI.8
337
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1526727986
L.Traffic.UL.PktLoss.Tot.Q
CI.9
Description
The counters measure the number of expected uplink traffic data packets for DRB services with
a specific QCI ranging from 1 to 9 in a cell.
Measurement Point
The number of expected uplink traffic data packets for DRB services with a specific QCI ranging
from 1 to 9 is sampled per second. At the end of a measurement period, the sum of these sampling
results is used as the value of the corresponding counter.
Formula
None
Unit
packet
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.UL.PktLoss.To
t.QCI.1
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.Traffic.UL.PktLoss.To
t.QCI.2
L.Traffic.UL.PktLoss.To
t.QCI.3
L.Traffic.UL.PktLoss.To
t.QCI.4
Issue 06 (2011-09-30)
338
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.Traffic.UL.PktLoss.To
t.QCI.5
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.Traffic.UL.PktLoss.To
t.QCI.6
L.Traffic.UL.PktLoss.To
t.QCI.7
L.Traffic.UL.PktLoss.To
t.QCI.8
L.Traffic.UL.PktLoss.To
t.QCI.9
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727908
L.Traffic.DL.PktDelay.Num
.QCI.1
1526727911
L.Traffic.DL.PktDelay.Num
.QCI.2
1526727914
L.Traffic.DL.PktDelay.Num
.QCI.3
339
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1526727917
L.Traffic.DL.PktDelay.Num
.QCI.4
1526727920
L.Traffic.DL.PktDelay.Num
.QCI.5
1526727923
L.Traffic.DL.PktDelay.Num
.QCI.6
1526727926
L.Traffic.DL.PktDelay.Num
.QCI.7
1526727929
L.Traffic.DL.PktDelay.Num
.QCI.8
1526727932
L.Traffic.DL.PktDelay.Num
.QCI.9
Description
The counters measure the number of successfully transmitted downlink traffic PDCP SDUs for
DRB services with a specific QCI ranging from 1 to 9 in a cell.
Measurement Point
The number of successfully transmitted packets of downlink traffic PDCP SDUs for DRB
services with a specific QCI ranging from 1 to 9 is sampled per second. At the end of a
measurement period, the sum of these sampling results is used as the value of the corresponding
counter.
Formula
None
Unit
packet
Issue 06 (2011-09-30)
340
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.DL.PktDelay.N
um.QCI.1
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
L.Traffic.DL.PktDelay.N
um.QCI.2
L.Traffic.DL.PktDelay.N
um.QCI.3
L.Traffic.DL.PktDelay.N
um.QCI.4
L.Traffic.DL.PktDelay.N
um.QCI.5
L.Traffic.DL.PktDelay.N
um.QCI.6
L.Traffic.DL.PktDelay.N
um.QCI.7
L.Traffic.DL.PktDelay.N
um.QCI.8
Issue 06 (2011-09-30)
341
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.Traffic.DL.PktDelay.N
um.QCI.9
LBFD-002008
TDLBFD-002008
LBFD-002025
Basic Scheduling
TDLBFD-002025
Basic Scheduling
Counter
The following table describes the counters contained in the "Measurement of the Duration for
Energy Conservation and Emission Reduction (Cell) (ChMeas.DFEE.Cell)" measurement unit:
Counte
r ID
Counter Name
Description
Original Release
1526728
150
L.ChMeas.DFEE.R
FOFF.Dur
Duration of RF intelligent
shutdown
Earlier than
V100R003C00
1526728
151
L.ChMeas.DFEE.C
arrierOFF.Dur
Earlier than
V100R003C00
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526728150
L.ChMeas.DFEE.RFOFF.D
ur
1526728151
L.ChMeas.DFEE.CarrierOF
F.Dur
342
eNodeB
Performance Counter Reference
Description
The counters measure the duration of RF intelligent shutdown and carrier intelligent shutdown
in a cell, respectively.
Measurement Point
The duration of RF intelligent shutdown or carrier intelligent shutdown in a cell is sampled per
second. At the end of a measurement period, the sum of these sampling results is used as the
value of the corresponding counter. A deviation of one sampling period may be caused in the
sampling timer when the timer performs time synchronization. As a result, a deviation of one
sampling period will also be generated in the value of the corresponding counter, which affects
the values of the KPIs that are calculated by using the counter. The effects vary depending on
the deviation in the value of the counter and calculation formulas for the KPIs.
Formula
None
Unit
s
Related Features
Counter Name
Feature ID
Feature Name
L.ChMeas.DFEE.RFOFF
.Dur
LOFD-001039
TDLOFD-001039
L.ChMeas.DFEE.Carrier
OFF.Dur
LOFD-001042
TDLOFD-001042
Counter
The following table describes the counters contained in the "LCS Measurement (Cell)
(LCS.Cell)" measurement unit:
Issue 06 (2011-09-30)
343
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1526728
154
L.LCS.EcidMeas.R
eq
V100R003C00
1526728
155
L.LCS.EcidMeas.S
ucc
V100R003C00
Counter Name
Description
1526728154
L.LCS.EcidMeas.Req
Description
The counter measures the number of LCS E-CID Measurement Initiation Request messages
received by the eNodeB from the E-SMLC. The LCS E-CID Measurement Initiation Request
message is an LPPa signaling message. The message is sent by the E-SMLC to an eNodeB,
requesting the E-CID measurement.
Measurement Point
As shown in point A in Figure 1-146, the L.LCS.EcidMeas.Req counter is incremented by 1
each time the eNodeB receives an E-CID Measurement Initiation Request message.
Figure 1-146
Issue 06 (2011-09-30)
344
eNodeB
Performance Counter Reference
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.LCS.EcidMeas.Req
LOFD-001047
LoCation Services(LCS)
TDLOFD-001047
LoCation Services(LCS)
Counter Name
Description
1526728155
L.LCS.EcidMeas.Succ
Description
This counter measures the number of E-CID Measurement Initiation Response messages in a
cell. The E-CID Measurement Initiation Response message is an LPPa signaling message sent
from an eNodeB to the E-SMLC. The message is used to notify the E-SMLC that the E-CID
measuring is successfully performed and report the E-CID measurement data.
Measurement Point
As shown in point B in Figure 1-147, the L.LCS.EcidMeas.Succ counter is incremented by 1
each time the eNodeB sends an E-CID Measurement Initiation Response message.
Issue 06 (2011-09-30)
345
eNodeB
Performance Counter Reference
Figure 1-147
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.LCS.EcidMeas.Succ
LOFD-001047
LoCation Services(LCS)
TDLOFD-001047
LoCation Services(LCS)
Counter
The following table describes the counters contained in the "Measurement of Emergency Calls
(Cell) (EMC.Cell)" measurement unit:
Issue 06 (2011-09-30)
346
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1526728
162
L.EMC.HHO.PrepAttOut
V100R003C00
1526728
163
L.EMC.HHO.ExecAttOut
V100R003C00
1526728
164
L.EMC.HHO.ExecSuccOut
V100R003C00
1526728
167
L.EMC.ERAB.AttEst
V100R003C00
1526728
168
L.EMC.ERAB.SuccEst
V100R003C00
1526728
169
L.EMC.ERAB.NormRel.HoOut
V100R003C00
1526728
170
L.EMC.ERAB.AbnormRel.
HoOut
V100R003C00
1526728
171
L.EMC.ERAB.Abnormrel
V100R003C00
1526728
172
L.EMC.ERAB.NormRel
V100R003C00
Counter Name
Description
1526728162
L.EMC.HHO.PrepAttOut
Description
The counter measures the number of intra-eNodeB and inter-eNodeB outgoing handover
attempts. Intra-eNodeB outgoing handovers include intra-eNodeB intra-frequency and intraeNodeB inter-frequency outgoing handovers. Similarly, inter-eNodeB outgoing handovers
include inter-eNodeB intra-frequency and inter-eNodeB inter-frequency outgoing handovers.
Issue 06 (2011-09-30)
347
eNodeB
Performance Counter Reference
Measurement Point
During a handover where the source cell and target cell are controlled by the same eNodeB, as
shown in point A in Figure 1-148, the counter is incremented by 1 each time the eNodeB decides
to perform an intra-eNodeB outgoing handover for an emergency call after receiving a
Measurement Report message from the UE.
Figure 1-149 shows a handover over the X2 interface. During such a handover where the source
cell and target cell are controlled by different eNodeBs, as shown in point A in Figure 1-149,
the counter is incremented by 1 each time the source eNodeB decides to perform an inter-eNodeB
handover over the X2 interface for an emergency call after receiving a Measurement Report
message from the UE.
Figure 1-150 shows a handover over the S1 interface. During such a handover where the source
cell and target cell are controlled by different eNodeBs, as shown in point A in Figure 1-150,
the counter is incremented by 1 each time the source eNodeB decides to perform an inter-eNodeB
handover over the S1 interface for an emergency call after receiving a Measurement Report
message from the UE.
Figure 1-148
Issue 06 (2011-09-30)
348
eNodeB
Performance Counter Reference
Figure 1-149
Issue 06 (2011-09-30)
349
eNodeB
Performance Counter Reference
Figure 1-150
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.EMC.HHO.PrepAttOut
LBFD-002028
Emergency call
TDLBFD-002028
Emergency call
350
eNodeB
Performance Counter Reference
Counter Name
Description
1526728163
L.EMC.HHO.ExecAttOut
Description
The counter measures the number of performed intra-eNodeB and inter-eNodeB outgoing
handovers. Intra-eNodeB outgoing handovers include intra-eNodeB intra-frequency and intraeNodeB inter-frequency outgoing handovers. Similarly, inter-eNodeB outgoing handovers
include inter-eNodeB intra-frequency and inter-eNodeB inter-frequency outgoing handovers.
Measurement Point
During a handover where the source cell and target cell are controlled by the same eNodeB, as
shown in point B in Figure 1-151, the counter is incremented by 1 each time the eNodeB sends
an RRC Connection Reconfiguration message to the UE for an emergency call.
Figure 1-152 shows a handover over the X2 interface. Figure 1-153 shows a handover over the
S1 interface. During such a handover where the source cell and target cell are controlled by
different eNodeBs, as shown in point B in Figure 1-152 or Figure 1-153, the counter is
incremented by 1 each time the source eNodeB sends an RRC Connection Reconfiguration
message to the UE for an emergency call after receiving a HANDOVER REQUEST
ACKNOWLEDGE message from the target eNodeB or receiving a HANDOVER COMMAND
message from the MME.
Figure 1-151
Issue 06 (2011-09-30)
351
eNodeB
Performance Counter Reference
Figure 1-152
Issue 06 (2011-09-30)
352
eNodeB
Performance Counter Reference
Figure 1-153
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.EMC.HHO.ExecAttOut
LBFD-002028
Emergency call
TDLBFD-002028
Emergency call
353
eNodeB
Performance Counter Reference
Counter Name
Description
1526728164
L.EMC.HHO.ExecSuccOut
Description
The counter measures the number of successful intra-eNodeB and inter-eNodeB outgoing
handovers in a cell. Intra-eNodeB outgoing handovers include intra-eNodeB intra-frequency
and intra-eNodeB inter-frequency outgoing handovers. Similarly, inter-eNodeB outgoing
handovers include inter-eNodeB intra-frequency and inter-eNodeB inter-frequency outgoing
handovers.
Measurement Point
During a handover where the source cell and target cell are controlled by the same eNodeB, as
shown in point C in Figure 1-154 or Figure 1-155, the counter is incremented by 1 each time
the eNodeB receives an RRC Connection Reconfiguration Complete message or an RRC
Connection Reestablishment Complete message from the UE for an emergency call.
Figure 1-156 shows a handover over the X2 interface. During such a handover where the source
cell and target cell are controlled by different eNodeBs, as shown in point C in Figure 1-156,
the counter is incremented by 1 each time the source eNodeB receives a UE CONTEXT
RELEASE message from the target eNodeB for an emergency call.
Figure 1-157 shows a handover over the S1 interface. During such a handover where the source
cell and target cell are controlled by different eNodeBs, as shown in point C in Figure 1-157,
the counter is incremented by 1 each time the source eNodeB receives a UE CONTEXT
RELEASE COMMAND message from the MME for an emergency call.
Issue 06 (2011-09-30)
354
eNodeB
Performance Counter Reference
Figure 1-154
Figure 1-155
Issue 06 (2011-09-30)
355
eNodeB
Performance Counter Reference
Figure 1-156
Issue 06 (2011-09-30)
356
eNodeB
Performance Counter Reference
Figure 1-157
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.EMC.HHO.ExecSuccOut
LBFD-002028
Emergency call
TDLBFD-002028
Emergency call
357
eNodeB
Performance Counter Reference
Counter Name
Description
1526728167
L.EMC.E-RAB.AttEst
Description
The counter measures the number of E-RAN setup attempts for emergency calls in a cell.
Measurement Point
As shown in point A in Figure 1-158 or Figure 1-159, the counter is incremented by 1 each
time the eNodeB receives an E-RAB SETUP REQUEST message or an INITIAL CONTEXT
SETUP REQUEST message from the MME for an emergency call.
Figure 1-158
Issue 06 (2011-09-30)
358
eNodeB
Performance Counter Reference
Figure 1-159
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.EMC.E-RAB.AttEst
LBFD-002028
Emergency call
TDLBFD-002028
Emergency call
359
eNodeB
Performance Counter Reference
Counter Name
Description
1526728168
L.EMC.E-RAB.SuccEst
Description
The counter measures the number of successful E-RAN setups for emergency calls in a cell.
Measurement Point
As shown in point B in Figure 1-160 or Figure 1-161, the counter is incremented by 1 each
time the eNodeB sends an E-RAB SETUP RESPONSE message or an INITIAL CONTEXT
SETUP RESPONSE message to the MME for an emergency call.
Figure 1-160
Issue 06 (2011-09-30)
360
eNodeB
Performance Counter Reference
Figure 1-161
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.EMC.E-RAB.SuccEst
LBFD-002028
Emergency call
TDLBFD-002028
Emergency call
361
eNodeB
Performance Counter Reference
Counter Name
Description
1526728169
L.EMC.ERAB.NormRel.HoOut
Description
The counter measures the number of normal E-RAB releases due to outgoing handovers for
emergency calls.
Measurement Point
Figure 1-162 shows an intra-eNodeB handover, Figure 1-163 shows a handover over the X2
interface, and Figure 1-164 shows a handover over the S1 interface. As shown in point C in
Figure 1-162, Figure 1-163, or Figure 1-164, the counter is incremented by 1 in the source cell
each time the source cell normally releases an E-RAB that corresponds to a successful E-RAB
setup in the target cell after a handover is successfully performed, and the E-RAB is released
for an emergency call.
Figure 1-162
Issue 06 (2011-09-30)
362
eNodeB
Performance Counter Reference
Figure 1-163
Issue 06 (2011-09-30)
363
eNodeB
Performance Counter Reference
Figure 1-164
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.EMC.ERAB.NormRel.HoOut
LBFD-002028
Emergency call
TDLBFD-002028
Emergency call
364
eNodeB
Performance Counter Reference
Counter Name
Description
1526728170
L.EMC.ERAB.AbnormRel.HoOut
Description
The counter measures the number of abnormal E-RAB releases due to outgoing handovers for
emergency calls in a cell.
Measurement Point
Figure 1-165 shows an intra-eNodeB handover, Figure 1-166 shows a handover over the X2
interface, and Figure 1-167 shows a handover over the S1 interface. As shown in point C in
Figure 1-165, Figure 1-166, or Figure 1-167, the counter is incremented by 1 in the source cell
each time the source cell abnormally releases an E-RAB that corresponds to a failed E-RAB
setup in the target cell after a handover is successfully performed, and the E-RAB is released
for an emergency call.
Figure 1-165
Issue 06 (2011-09-30)
365
eNodeB
Performance Counter Reference
Figure 1-166
Issue 06 (2011-09-30)
366
eNodeB
Performance Counter Reference
Figure 1-167
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.EMC.ERAB.AbnormRel.HoOut
LBFD-002028
Emergency call
TDLBFD-002028
Emergency call
367
eNodeB
Performance Counter Reference
Counter Name
Description
1526728171
L.EMC.E-RAB.Abnormrel
Description
The counter measures the number of abnormal E-RAB releases for emergency calls in a cell.
Measurement Point
As shown in point A in Figure 1-168, the counter is incremented by 1 each time the eNodeB
sends an E-RAB RELEASE INDICATION message to the MME, the Release Cause information
element is not Normal Release, Detach, User Inactivity, cs fallback triggered, or Inter-RAT
redirection, and the released E-RAB is used for emergency calls. When the MME sends an ERAB RELEASE COMMAND message back to the eNodeB, this counter is not incremented
repeatedly.
As shown in point A in Figure 1-169, the access layer bearer resources for all UEs are released
each time the eNodeB sends a UE CONTEXT RELEASE REQUEST message to the MME.
The counter is incremented according to the QCI of each service if the Release Cause information
element is not Normal Release, Detach, User Inactivity, cs fallback triggered, or Inter-RAT
redirection and the released E-RAB is used for emergency calls. When the MME sends a UE
CONTEXT RELEASE COMMAND message back to the eNodeB, the counter is not
incremented repeatedly.
Issue 06 (2011-09-30)
368
eNodeB
Performance Counter Reference
Figure 1-168
Issue 06 (2011-09-30)
369
eNodeB
Performance Counter Reference
Figure 1-169
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.EMC.ERAB.Abnormrel
LBFD-002028
Emergency call
TDLBFD-002028
Emergency call
370
eNodeB
Performance Counter Reference
Counter Name
Description
1526728172
L.EMC.E-RAB.NormRel
Description
The counter measures the number of normal E-RAB releases for emergency calls in a cell.
Measurement Point
As shown in point A in Figure 1-170, the eNodeB receives an E-RAB RELEASE COMMAND
message from the MME. The counter is incremented by 1 if the E-RAB release is initiated by
the MME for an emergency call or by the eNodeB with the Release Cause information element
of Normal Release, Detach, User Inactivity, cs fallback triggered, or Inter-RAT
redirection for an emergency call.
As shown in point A in Figure 1-171, the eNodeB receives a UE CONTEXT RELEASE
COMMAND message from the MME. The counter is incremented by 1 if the E-RAB release is
initiated by the MME for an emergency call or by the eNodeB with the Release Cause
information element of Normal Release, Detach, User Inactivity, cs fallback triggered, or
Inter-RAT redirection for an emergency call.
Figure 1-170
Issue 06 (2011-09-30)
371
eNodeB
Performance Counter Reference
Figure 1-171
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.EMC.E-RAB.NormRel
LBFD-002028
Emergency call
TDLBFD-002028
Emergency call
372
eNodeB
Performance Counter Reference
Description
UE Context contains the user-specific context information throughout the network. The release
success rate of UE Contexts directly indicates the capability of a cell to retrieve the UE resources.
This measurement unit measures the number of abnormal or normal UE context releases in a
cell. Based on the values of the counters, the release success rate of UE contexts in a cell is
determined. The measurement point of the measurement unit is shown in Figure 1-172.
Figure 1-172
Counter
The following table describes the counters contained in the "UE Context Release Measurement
(Cell)" measurement unit:
Counte
r ID
Counter Name
Description
Original Release
1526728
227
L.UECNTX.Abnor
mRel
V100R003C00
1526728
228
L.UECNTX.Norm
Rel
V100R003C00
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526728227
L.UECNTX.AbnormRel
373
eNodeB
Performance Counter Reference
Description
The counter measures the number of abnormal UE context releases in a cell. Abnormal UE
context releases are releases initiated by the eNodeB due to exceptions.
Measurement Point
As shown in point A in Figure 1-173, the access layer bearer resources for all UEs are released
each time the UE context setup procedure is successful and the eNodeB sends a UE CONTEXT
RELEASE REQUEST message to the MME. The L.UECNTX.AbnormRel counter is
incremented by 1 each time the Release Cause information element of the message is not Normal
Release, Detach, User Inactivity, cs fallback triggered, or Inter-RAT redirection.
Figure 1-173
Formula
None
Unit
times
Issue 06 (2011-09-30)
374
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.UECNTX.AbnormRel
LBFD-002008
TDLBFD-002008
Counter Name
Description
1526728228
L.UECNTX.NormRel
Description
The counter measures the number of normal UE context releases in a cell. Normal UE context
releases can be initiated by the MME or eNodeB.
Measurement Point
As shown in point A in Figure 1-174, the UE context setup procedure is successful and the
eNodeB receives a UE CONTEXT RELEASE COMMAND message from the MME. The
counter is incremented by 1 if the UE context release is initiated by the MME or by the eNodeB
with the Release Cause information element of Normal Release, Detach, User Inactivity, cs
fallback triggered, or Inter-RAT redirection.
Issue 06 (2011-09-30)
375
eNodeB
Performance Counter Reference
Figure 1-174
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.UECNTX.NormRel
LBFD-002008
TDLBFD-002008
376
eNodeB
Performance Counter Reference
Description
Counter
The following table describes the counters contained in the "S1-Link Measurement (S1-Link)
(Sig.S1)" measurement unit:
Counte
r ID
Counter Name
Description
Original Release
1526727
188
L.Sig.S1.SendSetup
.Att
Earlier than
V100R003C00
1526727
189
L.Sig.S1.SendSetup
.Succ
Earlier than
V100R003C00
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727188
L.Sig.S1.SendSetup.Att
377
eNodeB
Performance Counter Reference
Description
The counter measures the number of S1 link setup attempts over the S1 interface at the eNodeB.
That is, the counter measures the number of times the S1 SETUP REQUEST messages are sent
from the local eNodeB to the MME. The S1 SETUP REQUEST message is a message sent over
the S1 interface from the local eNodeB to the MME. The message is used to request the setup
of an S1 link with the MME.
Measurement Point
As shown in point A in Figure 1-175, the L.Sig.S1.SendSetup.Att counter is incremented by 1
each time the eNodeB sends an S1 SETUP REQUEST message to the MME over the S1
interface.
Figure 1-175
Formula
None
Issue 06 (2011-09-30)
378
eNodeB
Performance Counter Reference
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.Sig.S1.SendSetup.Att
LBFD-002008
TDLBFD-002008
Counter Name
Description
1526727189
L.Sig.S1.SendSetup.Succ
Description
The counter measures the number of successful S1 link setups over the S1 interface at the
eNodeB. That is, the counter measures the number of times the S1 SETUP RESPONSE messages
are received by the local eNodeB from the MME as responses to the S1 SETUP REQUEST
messages. The S1 SETUP RESPONSE message is a message sent over the S1 interface from
the MME to the eNodeB. The message is used to inform the eNodeB of the successful setup of
an S1 link.
Measurement Point
As shown in point B in Figure 1-176, the L.Sig.S1.SendSetup.Succ counter is incremented by
1 each time the eNodeB receives an S1 SETUP RESPONSE message from the MME over the
S1 interface.
Issue 06 (2011-09-30)
379
eNodeB
Performance Counter Reference
Figure 1-176
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.Sig.S1.SendSetup.Succ
LBFD-002008
TDLBFD-002008
380
eNodeB
Performance Counter Reference
Description
Counter
The following table describes the counters contained in the "X2-Link Measurement (X2-Link)
(Sig.X2)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
202
L.Sig.X2.SendSetu
p.Att
Earlier than
V100R003C00
1526727
204
L.Sig.X2.RecvSetu
p.Att
Earlier than
V100R003C00
1526727
203
L.Sig.X2.SendSetu
p.Succ
Earlier than
V100R003C00
1526727
205
L.Sig.X2.RecvSetu
p.Succ
Earlier than
V100R003C00
381
eNodeB
Performance Counter Reference
Counter Name
Description
1526727202
L.Sig.X2.SendSetup.Att
1526727204
L.Sig.X2.RecvSetup.Att
Description
The counters measure the number of X2 link setup attempts. That is, the counters measure the
number of times the X2 SETUP REQUEST messages are transmitted between the local eNodeB
and the peer eNodeB. The X2 SETUP REQUEST message is a message sent over the X2
interface from an eNodeB to another eNodeB. The message is used to request the setup of an
X2 link.
Measurement Point
As shown in point A in Figure 1-177, the L.Sig.X2.SendSetup.Att counter is incremented by 1
each time the local eNodeB sends an X2 SETUP REQUEST message to the peer eNodeB over
the X2 interface.
As shown in point A in Figure 1-178, the L.Sig.X2.RecvSetup.Att counter is incremented by 1
each time the local eNodeB receives an X2 SETUP REQUEST message from the peer eNodeB
over the X2 interface.
Issue 06 (2011-09-30)
382
eNodeB
Performance Counter Reference
Figure 1-177
Issue 06 (2011-09-30)
383
eNodeB
Performance Counter Reference
Figure 1-178
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.Sig.X2.SendSetup.Att
LBFD-002018
Mobility Management
TDLBFD-002018
Mobility Management
LBFD-002018
Mobility Management
TDLBFD-002018
Mobility Management
L.Sig.X2.RecvSetup.Att
Issue 06 (2011-09-30)
384
eNodeB
Performance Counter Reference
Counter Name
Description
1526727203
L.Sig.X2.SendSetup.Succ
1526727205
L.Sig.X2.RecvSetup.Succ
Description
The counters measure the number of successful X2 link setups. That is, the counters measure
the number of times the X2 SETUP RESPONSE messages are transmitted between the local
eNodeB and the peer eNodeB as responses to the X2 SETUP REQUEST messages. The X2
SETUP RESPONSE message is a message sent over the X2 interface from an eNodeB to another
eNodeB. The message is used to inform the peer eNodeB of the successful setup of an X2 link.
Measurement Point
As shown in point B in Figure 1-179, the L.Sig.X2.SendSetup.Succ counter is incremented by
1 each time the local eNodeB receives an X2 SETUP RESPONSE message from the peer
eNodeB over the X2 interface.
As shown in point B in Figure 1-180, the L.Sig.X2.RecvSetup.Succ counter is incremented by
1 each time the local eNodeB sends an X2 SETUP RESPONSE message to the peer eNodeB
over the X2 interface.
Issue 06 (2011-09-30)
385
eNodeB
Performance Counter Reference
Figure 1-179
Issue 06 (2011-09-30)
386
eNodeB
Performance Counter Reference
Figure 1-180
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.Sig.X2.SendSetup.Suc
c
LBFD-002018
Mobility Management
TDLBFD-002018
Mobility Management
L.Sig.X2.RecvSetup.Suc
c
LBFD-002018
Mobility Management
TDLBFD-002018
Mobility Management
387
eNodeB
Performance Counter Reference
Description
Counter
The following table describes the counters contained in the "Inter-Specific Cell Outgoing
Handover Measurement (Cell) (HO.NCell.Cell)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
293
L.HHO.NCell.PrepAttOut
Earlier than
V100R003C00
1526727
294
L.HHO.NCell.ExecAttOut
Earlier than
V100R003C00
1526727
295
L.HHO.NCell.ExecSuccOut
Earlier than
V100R003C00
1526728
173
L.HHO.Ncell.PingPongHo
V100R003C00
388
eNodeB
Performance Counter Reference
Counter Name
Description
1526727293
L.HHO.NCell.PrepAttOut
Description
The counter measures the number of outgoing handover attempts between two specific cells.
Measurement Point
Figure 1-181 shows an intra-eNodeB handover, Figure 1-182 shows a handover over the X2
interface, and Figure 1-183 shows a handover over the S1 interface. During a handover where
the source cell and target cell are two specified neighboring cells, as shown in point A in Figure
1-181, Figure 1-182, or Figure 1-183, the counter is incremented by 1 in the source cell each
time the eNodeB decides to perform an outgoing handover after receiving a Measurement Report
message from the UE.
Figure 1-181
Issue 06 (2011-09-30)
389
eNodeB
Performance Counter Reference
Figure 1-182
Issue 06 (2011-09-30)
390
eNodeB
Performance Counter Reference
Figure 1-183
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.NCell.PrepAttOut
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Issue 06 (2011-09-30)
391
eNodeB
Performance Counter Reference
Counter Name
Description
1526727294
L.HHO.NCell.ExecAttOut
Description
The counter measures the number of performed outgoing handovers between two specific cells.
Measurement Point
During a handover where the source cell and target cell are controlled by the same eNodeB, the
counter is incremented by 1 in the source cell each time the eNodeB sends an RRC Connection
Reconfiguration message (containing the mobilityControlInfo) to the UE, as shown in point B
in Figure 1-184. If the source cell and target cell are neighboring cells controlled by different
eNodeBs, the counter is also incremented by 1 in the source cell each time the source eNodeB
sends an RRC Connection Reconfiguration message to the UE after receiving a HANDOVER
REQUEST ACKNOWLEDGE message from the target eNodeB or receiving a HANDOVER
COMMAND message from the MME, as shown in point B in Figure 1-185 or Figure 1-186.
Figure 1-184
Issue 06 (2011-09-30)
392
eNodeB
Performance Counter Reference
Figure 1-185
Issue 06 (2011-09-30)
393
eNodeB
Performance Counter Reference
Figure 1-186
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.NCell.ExecAttOut
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Issue 06 (2011-09-30)
394
eNodeB
Performance Counter Reference
Counter Name
Description
1526727295
L.HHO.NCell.ExecSuccOut
Description
The counter measures the number of successful outgoing handovers between two specific cells.
Measurement Point
During a handover where the source cell and target cell are controlled by the same eNodeB, the
counter is incremented by 1 in the source cell each time data in the buffer is forwarded during
the handover after the target cell receives an RRC Connection Reconfiguration Complete
message from the UE, as shown in point C in Figure 1-187. If the source cell and target cell are
neighboring cells controlled by different eNodeBs, the counter is incremented by 1 in the source
cell each time data in the buffer is forwarded during the handover after the source eNodeB
receives a UE CONTEXT RELEASE message from the target eNodeB or a UE CONTEXT
RELEASE COMMAND message from the MME.
Figure 1-187
Issue 06 (2011-09-30)
395
eNodeB
Performance Counter Reference
Figure 1-188
Issue 06 (2011-09-30)
396
eNodeB
Performance Counter Reference
Figure 1-189
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.NCell.ExecSuccOut
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
Issue 06 (2011-09-30)
397
eNodeB
Performance Counter Reference
Counter Name
Description
1526728173
L.HHO.Ncell.PingPongHo
Description
The counter measures the number of ping-pong handovers between two specific cells.
Measurement Point
The L.HHO.Ncell.PingPongHo counter is incremented by 1 each time the UE experiences a
ping-pong handover between two neighboring cells. The time threshold for ping-pong handover
is 5s by default. The counter is incremented if any of the following conditions occurs in the two
neighboring cells: (1) During a handover over the X2 interface, as shown in point C in Figure
1-190, the target eNodeB sends a UE CONTEXT RELEASE message to the source eNodeB
after receiving a PATH SWITCH REQUEST ACKNOWLEDGE message from the MME over
the X2 interface; (2) During a handover over the S1 interface, as shown in point C in Figure
1-191, the target eNodeB sends a HANDOVER NOTIFY message to the MME; (3) During an
intra-eNodeB handover, as shown in point C in Figure 1-192, the target cell receives an RRC
CONNECTION RECONFIGURATION COMPLETE message.
Figure 1-190
Issue 06 (2011-09-30)
398
eNodeB
Performance Counter Reference
Figure 1-191
Figure 1-192
Issue 06 (2011-09-30)
399
eNodeB
Performance Counter Reference
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.HHO.Ncell.PingPongHo
LBFD-00201801
LBFD-00201802
LOFD-001019
LOFD-001020
LOFD-001021
TDLBFD-00201801
TDLBFD-00201802
TDLOFD-001019
TDLOFD-001020
Issue 06 (2011-09-30)
Measurement Unit
Description
400
eNodeB
Performance Counter Reference
Measurement Unit
Description
Issue 06 (2011-09-30)
401
eNodeB
Performance Counter Reference
Figure 1-194
Counter
The following table describes the counters contained in the "E-RAB Setup Measurement
(Cell.Operator) (E-RAB.Est.Cell.Operator)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
853
L.ERAB.AttEst.PLMN
.QCI.1
Earlier than
V100R003C00
1526727
855
L.ERAB.AttEst.PLMN
.QCI.2
Earlier than
V100R003C00
1526727
857
L.ERAB.AttEst.PLMN
.QCI.3
Earlier than
V100R003C00
1526727
859
L.ERAB.AttEst.PLMN
.QCI.4
Earlier than
V100R003C00
402
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
861
L.ERAB.AttEst.PLMN
.QCI.5
Earlier than
V100R003C00
1526727
863
L.ERAB.AttEst.PLMN
.QCI.6
Earlier than
V100R003C00
1526727
865
L.ERAB.AttEst.PLMN
.QCI.7
Earlier than
V100R003C00
1526727
867
L.ERAB.AttEst.PLMN
.QCI.8
Earlier than
V100R003C00
1526727
869
L.ERAB.AttEst.PLMN
.QCI.9
Earlier than
V100R003C00
1526727
854
L.ERAB.SuccEst.PLM
N.QCI.1
Earlier than
V100R003C00
1526727
856
L.ERAB.SuccEst.PLM
N.QCI.2
Earlier than
V100R003C00
1526727
858
L.ERAB.SuccEst.PLM
N.QCI.3
Earlier than
V100R003C00
1526727
860
L.ERAB.SuccEst.PLM
N.QCI.4
Earlier than
V100R003C00
1526727
862
L.ERAB.SuccEst.PLM
N.QCI.5
Earlier than
V100R003C00
403
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1526727
864
L.ERAB.SuccEst.PLM
N.QCI.6
Earlier than
V100R003C00
1526727
866
L.ERAB.SuccEst.PLM
N.QCI.7
Earlier than
V100R003C00
1526727
868
L.ERAB.SuccEst.PLM
N.QCI.8
Earlier than
V100R003C00
1526727
870
L.ERAB.SuccEst.PLM
N.QCI.9
Earlier than
V100R003C00
1526728
250
L.ERAB.AttEst.PLMN
V100R003C00
1526728
251
L.ERAB.SuccEst.PLM
N
V100R003C00
1526728
252
L.ERAB.AttEst.HOIn.
PLMN
V100R003C00
1526728
253
L.ERAB.SuccEst.HOI
n.PLMN
V100R003C00
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727853
L.ERAB.AttEst.PLMN.QCI.1
1526727855
L.ERAB.AttEst.PLMN.QCI.2
404
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1526727857
L.ERAB.AttEst.PLMN.QCI.3
1526727859
L.ERAB.AttEst.PLMN.QCI.4
1526727861
L.ERAB.AttEst.PLMN.QCI.5
1526727863
L.ERAB.AttEst.PLMN.QCI.6
1526727865
L.ERAB.AttEst.PLMN.QCI.7
1526727867
L.ERAB.AttEst.PLMN.QCI.8
1526727869
L.ERAB.AttEst.PLMN.QCI.9
Description
The counters measure the number of E-RAB setup attempts of a specified operator for each
service with a specific QCI ranging from 1 to 9 in a cell.
Measurement Point
Assume that a UE of a specified operator initiates an access to the network. As shown in point
A in Figure 1-195 or Figure 1-196, the corresponding counter is incremented by 1 each time
the eNodeB receives an E-RAB SETUP REQUEST message or an INITIAL CONTEXT SETUP
REQUEST message from the MME. If the E-RAB SETUP REQUEST message or INITIAL
CONTEXT SETUP REQUEST message requires multiple E-RAB setup attempts at the same
time, the corresponding counter is incremented according to the QCI of each service.
Issue 06 (2011-09-30)
405
eNodeB
Performance Counter Reference
Figure 1-195
Issue 06 (2011-09-30)
406
eNodeB
Performance Counter Reference
Figure 1-196
Formula
None
Unit
times
Issue 06 (2011-09-30)
407
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.ERAB.AttEst.PLMN.QCI.
1
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
Issue 06 (2011-09-30)
408
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ERAB.AttEst.PLMN.QCI.
7
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727854
L.ERAB.SuccEst.PLMN.QCI.1
1526727856
L.ERAB.SuccEst.PLMN.QCI.2
1526727858
L.ERAB.SuccEst.PLMN.QCI.3
1526727860
L.ERAB.SuccEst.PLMN.QCI.4
1526727862
L.ERAB.SuccEst.PLMN.QCI.5
409
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1526727864
L.ERAB.SuccEst.PLMN.QCI.6
1526727866
L.ERAB.SuccEst.PLMN.QCI.7
1526727868
L.ERAB.SuccEst.PLMN.QCI.8
1526727870
L.ERAB.SuccEst.PLMN.QCI.9
Description
The counters measures the number of successful E-RAB setups of a specified operator for each
service with a specific QCI ranging from 1 to 9 in a cell.
Measurement Point
Assume that a UE of a specified operator initiates an access to the network. As shown in point
B in Figure 1-197 or Figure 1-198, the corresponding counter is incremented by 1 each time
the eNodeB sends an E-RAB SETUP RESPONSE message or an INITIAL CONTEXT SETUP
RESPONSE message to the MME. If the E-RAB SETUP RESPONSE message or INITIAL
CONTEXT SETUP RESPONSE message contains multiple successful E-RAB setups at the
same time, the corresponding counter is incremented according to the QCI of each service.
Issue 06 (2011-09-30)
410
eNodeB
Performance Counter Reference
Figure 1-197
Issue 06 (2011-09-30)
411
eNodeB
Performance Counter Reference
Figure 1-198
Formula
None
Unit
times
Issue 06 (2011-09-30)
412
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.ERAB.SuccEst.PLMN.QC
I.1
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
Issue 06 (2011-09-30)
413
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ERAB.SuccEst.PLMN.QC
I.7
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
Counter Name
Description
1526728250
L.E-RAB.AttEst.PLMN
Description
The counter measures the total number of E-RAB setup attempts of a specified operator in a
cell.
Measurement Point
Assume that a UE of a specified operator initiates an access to the network. As shown in point
A in Figure 1-199 or Figure 1-200, the corresponding counter is incremented by 1 each time
the eNodeB receives an E-RAB SETUP REQUEST message or an INITIAL CONTEXT SETUP
REQUEST message from the MME. If the E-RAB SETUP REQUEST message or INITIAL
CONTEXT SETUP REQUEST message requires multiple E-RAB setups at the same time, the
counter is incremented repeatedly.
Issue 06 (2011-09-30)
414
eNodeB
Performance Counter Reference
Figure 1-199
Issue 06 (2011-09-30)
415
eNodeB
Performance Counter Reference
Figure 1-200
Formula
None
Unit
times
Issue 06 (2011-09-30)
416
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.E-RAB.AttEst.PLMN
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
Counter Name
Description
1526728251
L.E-RAB.SuccEst.PLMN
Description
The counter measures the total number of successful E-RAB setups of a specified operator in a
cell.
Measurement Point
Assume that a UE of a specified operator initiates an access to the network. As shown in point
B in Figure 1-201 or Figure 1-202, the corresponding counter is incremented by 1 each time
the eNodeB sends an E-RAB SETUP RESPONSE message or an INITIAL CONTEXT SETUP
RESPONSE message to the MME. If the E-RAB SETUP RESPONSE message or INITIAL
CONTEXT SETUP RESPONSE message contains multiple successful E-RAB setups at the
same time, the counter is incremented repeatedly.
Issue 06 (2011-09-30)
417
eNodeB
Performance Counter Reference
Figure 1-201
Issue 06 (2011-09-30)
418
eNodeB
Performance Counter Reference
Figure 1-202
Formula
None
Unit
times
Issue 06 (2011-09-30)
419
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.ERAB.SuccEst.PLMN
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
Counter Name
Description
1526728252
L.ERAB.AttEst.HOIn.PLMN
Description
The counter measures the total number of E-RAB setup attempts for incoming handovers in a
cell.
Measurement Point
Figure 1-203 shows an intra-eNodeB handover, Figure 1-204 shows a handover over the X2
interface, and Figure 1-205 shows a handover over the S1 interface. The counter is incremented
by 1 in the target cell each time the eNodeB decides to perform a handover after receiving a
Measurement Report message from a UE of a specified operator. As shown in point A in Figure
1-203, Figure 1-204, or Figure 1-205, the counter is incremented repeatedly in the target cell
if multiple E-RABs are attempted to be set up in the target cell.
Issue 06 (2011-09-30)
420
eNodeB
Performance Counter Reference
Figure 1-203
Figure 1-204
Issue 06 (2011-09-30)
421
eNodeB
Performance Counter Reference
Figure 1-205
Formula
None
Unit
times
Issue 06 (2011-09-30)
422
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.ERAB.AttEst.HOIn.PLM
N
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
LOFD-001036
LOFD-001037
Counter Name
Description
1526728253
L.ERAB.SuccEst.HOIn.PLMN
Description
The counter measures the number of successful E-RAB setups of a specified operator for
incoming handovers in a cell.
Measurement Point
Figure 1-206 shows an intra-eNodeB handover, Figure 1-207 shows a handover over the X2
interface, and Figure 1-208 shows a handover over the S1 interface. As shown in point C in
Figure 1-206, Figure 1-207, or Figure 1-208, the counter is incremented by 1 in the target cell
if an E-RAB is successfully set up in the target cell after the handover is performed successfully
for a UE of a specified operator. If multiple E-RABs are successfully set up during the handover,
the counter is incremented repeatedly.
Issue 06 (2011-09-30)
423
eNodeB
Performance Counter Reference
Figure 1-206
Figure 1-207
Issue 06 (2011-09-30)
424
eNodeB
Performance Counter Reference
Figure 1-208
Formula
None
Unit
times
Issue 06 (2011-09-30)
425
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.ERAB.SuccEst.HOIn.PL
MN
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
LOFD-001036
LOFD-001037
Issue 06 (2011-09-30)
426
eNodeB
Performance Counter Reference
Figure 1-209
Figure 1-210
Issue 06 (2011-09-30)
427
eNodeB
Performance Counter Reference
Counter
The following table describes the counters contained in the "E-RAB Release Measurement
(Cell.Operator) (E-RAB.Rel.Cell.Operator)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
871
L.ERAB.AbnormRel.P
LMN.QCI.1
Earlier than
V100R003C00
1526727
873
L.ERAB.AbnormRel.P
LMN.QCI.2
Earlier than
V100R003C00
1526727
875
L.ERAB.AbnormRel.P
LMN.QCI.3
Earlier than
V100R003C00
1526727
877
L.ERAB.AbnormRel.P
LMN.QCI.4
Earlier than
V100R003C00
1526727
879
L.ERAB.AbnormRel.P
LMN.QCI.5
Earlier than
V100R003C00
1526727
881
L.ERAB.AbnormRel.P
LMN.QCI.6
Earlier than
V100R003C00
1526727
883
L.ERAB.AbnormRel.P
LMN.QCI.7
Earlier than
V100R003C00
1526727
885
L.ERAB.AbnormRel.P
LMN.QCI.8
Earlier than
V100R003C00
1526727
887
L.ERAB.AbnormRel.P
LMN.QCI.9
Earlier than
V100R003C00
428
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
872
L.ERAB.NormRel.PL
MN.QCI.1
Earlier than
V100R003C00
1526727
874
L.ERAB.NormRel.PL
MN.QCI.2
Earlier than
V100R003C00
1526727
876
L.ERAB.NormRel.PL
MN.QCI.3
Earlier than
V100R003C00
1526727
878
L.ERAB.NormRel.PL
MN.QCI.4
Earlier than
V100R003C00
1526727
880
L.ERAB.NormRel.PL
MN.QCI.5
Earlier than
V100R003C00
1526727
882
L.ERAB.NormRel.PL
MN.QCI.6
Earlier than
V100R003C00
1526727
884
L.ERAB.NormRel.PL
MN.QCI.7
Earlier than
V100R003C00
1526727
886
L.ERAB.NormRel.PL
MN.QCI.8
Earlier than
V100R003C00
1526727
888
L.ERAB.NormRel.PL
MN.QCI.9
Earlier than
V100R003C00
1526728
009
L.ERAB.NormRel.HO
Out.PLMN.QCI.1
Earlier than
V100R003C00
429
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526728
010
L.ERAB.NormRel.HO
Out.PLMN.QCI.2
Earlier than
V100R003C00
1526728
011
L.ERAB.NormRel.HO
Out.PLMN.QCI.3
Earlier than
V100R003C00
1526728
012
L.ERAB.NormRel.HO
Out.PLMN.QCI.4
Earlier than
V100R003C00
1526728
013
L.ERAB.NormRel.HO
Out.PLMN.QCI.5
Earlier than
V100R003C00
1526728
014
L.ERAB.NormRel.HO
Out.PLMN.QCI.6
Earlier than
V100R003C00
1526728
015
L.ERAB.NormRel.HO
Out.PLMN.QCI.7
Earlier than
V100R003C00
1526728
016
L.ERAB.NormRel.HO
Out.PLMN.QCI.8
Earlier than
V100R003C00
1526728
017
L.ERAB.NormRel.HO
Out.PLMN.QCI.9
Earlier than
V100R003C00
1526728
018
L.ERAB.AbnormRel.
HOOut.PLMN.QC
I.1
Earlier than
V100R003C00
1526728
019
L.ERAB.AbnormRel.
HOOut.PLMN.QC
I.2
Earlier than
V100R003C00
430
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526728
020
L.ERAB.AbnormRel.
HOOut.PLMN.QC
I.3
Earlier than
V100R003C00
1526728
021
L.ERAB.AbnormRel.
HOOut.PLMN.QC
I.4
Earlier than
V100R003C00
1526728
022
L.ERAB.AbnormRel.
HOOut.PLMN.QC
I.5
Earlier than
V100R003C00
1526728
023
L.ERAB.AbnormRel.
HOOut.PLMN.QC
I.6
Earlier than
V100R003C00
1526728
024
L.ERAB.AbnormRel.
HOOut.PLMN.QC
I.7
Earlier than
V100R003C00
1526728
025
L.ERAB.AbnormRel.
HOOut.PLMN.QC
I.8
Earlier than
V100R003C00
1526728
026
L.ERAB.AbnormRel.
HOOut.PLMN.QC
I.9
Earlier than
V100R003C00
1526728
254
L.ERAB.AbnormRel.P
LMN
V100R003C00
1526728
255
L.ERAB.NormRel.PL
MN
V100R003C00
1526728
256
L.ERAB.NormRel.HO
Out.PLMN
V100R003C00
1526728
257
L.ERAB.AbnormRel.
HOOut.PLMN
V100R003C00
431
eNodeB
Performance Counter Reference
Counter Name
Description
1526727871
L.ERAB.AbnormRel.PLMN.Q
CI.1
1526727873
L.ERAB.AbnormRel.PLMN.Q
CI.2
1526727875
L.ERAB.AbnormRel.PLMN.Q
CI.3
1526727877
L.ERAB.AbnormRel.PLMN.Q
CI.4
1526727879
L.ERAB.AbnormRel.PLMN.Q
CI.5
1526727881
L.ERAB.AbnormRel.PLMN.Q
CI.6
1526727883
L.ERAB.AbnormRel.PLMN.Q
CI.7
1526727885
L.ERAB.AbnormRel.PLMN.Q
CI.8
1526727887
L.ERAB.AbnormRel.PLMN.Q
CI.9
Description
The counters measure the number of abnormal E-RAB releases of a specified operator for each
service with a specific QCI ranging from 1 to 9 in a cell.
Measurement Point
Assume that a UE belongs to a specified operator. As shown in point A in Figure 1-211, the
corresponding counter is incremented by 1 each time the eNodeB sends an E-RAB RELEASE
INDICATION message to the MME and the Release Cause information element is not Normal
Release, Detach, User Inactivity, cs fallback triggered, or Inter-RAT redirection. When the
MME sends an E-RAB RELEASE COMMAND message back to the eNodeB, the counter is
Issue 06 (2011-09-30)
432
eNodeB
Performance Counter Reference
not incremented repeatedly. If the E-RAB RELEASE INDICATION message requires multiple
E-RAB releases at the same time, the corresponding counter is incremented according to the
QCI of each service.
As shown in point A in Figure 1-212, the access layer bearer resources for all UEs are released
each time the eNodeB sends a UE CONTEXT RELEASE REQUEST message to the MME.
The corresponding counter is incremented according to the QCI of each service if the Release
Cause information element is not Normal Release, Detach, User Inactivity, cs fallback
triggered, or Inter-RAT redirection. When the MME sends a UE CONTEXT RELEASE
COMMAND message back to the eNodeB, the corresponding counter is not incremented
repeatedly.
Figure 1-211
Issue 06 (2011-09-30)
433
eNodeB
Performance Counter Reference
Figure 1-212
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.ERAB.AbnormRel.PLMN.
QCI.1
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
Issue 06 (2011-09-30)
434
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ERAB.AbnormRel.PLMN.
QCI.2
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
Issue 06 (2011-09-30)
435
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ERAB.AbnormRel.PLMN.
QCI.8
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727872
L.ERAB.NormRel.PLMN.QCI.
1
1526727874
L.ERAB.NormRel.PLMN.QCI.
2
1526727876
L.ERAB.NormRel.PLMN.QCI.
3
1526727878
L.ERAB.NormRel.PLMN.QCI.
4
1526727880
L.ERAB.NormRel.PLMN.QCI.
5
1526727882
L.ERAB.NormRel.PLMN.QCI.
6
1526727884
L.ERAB.NormRel.PLMN.QCI.
7
436
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1526727886
L.ERAB.NormRel.PLMN.QCI.
8
1526727888
L.ERAB.NormRel.PLMN.QCI.
9
Description
The counters measure the number of normal E-RAB releases of a specified operator for each
service with a specific QCI ranging from 1 to 9 in a cell.
Measurement Point
Assume that a UE belongs to a specified operator. As shown in point A in Figure 1-213, the
eNodeB receives an E-RAB RELEASE COMMAND message from the MME. The
corresponding counter is incremented according to the QCI of each service each time the E-RAB
release is initiated by the MME or by the eNodeB with the Release Cause information element
of Normal Release, Detach, User Inactivity, cs fallback triggered, or Inter-RAT
redirection. If the E-RAB RELEASE COMMAND message requires multiple E-RAB releases
at the same time, the corresponding counter is incremented according to the QCI of each service.
As shown in point A in Figure 1-214, the access layer bearer resources for all UEs are released
each time the eNodeB receives a UE CONTEXT RELEASE COMMAND message from the
MME. The corresponding counter is incremented according to the QCI of each service if the ERAB release is initiated by the MME or by the eNodeB with the Release Cause information
element of Normal Release, Detach, User Inactivity, cs fallback triggered, or Inter-RAT
redirection.
Issue 06 (2011-09-30)
437
eNodeB
Performance Counter Reference
Figure 1-213
Issue 06 (2011-09-30)
438
eNodeB
Performance Counter Reference
Figure 1-214
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.ERAB.NormRel.PLMN.Q
CI.1
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
Issue 06 (2011-09-30)
439
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ERAB.NormRel.PLMN.Q
CI.2
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
Issue 06 (2011-09-30)
440
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ERAB.NormRel.PLMN.Q
CI.8
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526728009
L.ERAB.NormRel.HOOut.PLM
N.QCI.1
1526728010
L.ERAB.NormRel.HOOut.PLM
N.QCI.2
1526728011
L.ERAB.NormRel.HOOut.PLM
N.QCI.3
1526728012
L.ERAB.NormRel.HOOut.PLM
N.QCI.4
1526728013
L.ERAB.NormRel.HOOut.PLM
N.QCI.5
1526728014
L.ERAB.NormRel.HOOut.PLM
N.QCI.6
1526728015
L.ERAB.NormRel.HOOut.PLM
N.QCI.7
441
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1526728016
L.ERAB.NormRel.HOOut.PLM
N.QCI.8
1526728017
L.ERAB.NormRel.HOOut.PLM
N.QCI.9
Description
The counters measure the number of normal E-RAB releases of a specified operator for outgoing
handovers with a specific QCI in the source cell, which are caused by successful E-RAB setups
in the target cell for incoming handovers.
Measurement Point
Figure 1-215 shows an intra-eNodeB handover, Figure 1-216 shows a handover over the X2
interface, and Figure 1-217 shows a handover over the S1 interface. As shown in point C in
Figure 1-215, Figure 1-216 or Figure 1-217, the corresponding counter is incremented by 1 in
the source cell according to the QCI of each service each time the source cell normally releases
an E-RAB that corresponds to a successfully E-RAB setup in the target cell after an outgoing
handover initiated by a UE of a specified operator is successfully performed.
Figure 1-215
Issue 06 (2011-09-30)
442
eNodeB
Performance Counter Reference
Figure 1-216
Issue 06 (2011-09-30)
443
eNodeB
Performance Counter Reference
Figure 1-217
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.ERAB.NormRel.HOOut.P
LMN.QCI.1
LOFD-001036
L.ERAB.NormRel.HOOut.P
LMN.QCI.2
LOFD-001036
LOFD-001037
LOFD-001037
444
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ERAB.NormRel.HOOut.P
LMN.QCI.3
LOFD-001036
L.ERAB.NormRel.HOOut.P
LMN.QCI.4
LOFD-001036
L.ERAB.NormRel.HOOut.P
LMN.QCI.5
LOFD-001036
L.ERAB.NormRel.HOOut.P
LMN.QCI.6
LOFD-001036
L.ERAB.NormRel.HOOut.P
LMN.QCI.7
LOFD-001036
L.ERAB.NormRel.HOOut.P
LMN.QCI.8
LOFD-001036
L.ERAB.NormRel.HOOut.P
LMN.QCI.9
LOFD-001036
LOFD-001037
LOFD-001037
LOFD-001037
LOFD-001037
LOFD-001037
LOFD-001037
LOFD-001037
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526728018
L.ERAB.AbnormRel.HOOut.P
LMN.QCI.1
445
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1526728019
L.ERAB.AbnormRel.HOOut.P
LMN.QCI.2
1526728020
L.ERAB.AbnormRel.HOOut.P
LMN.QCI.3
1526728021
L.ERAB.AbnormRel.HOOut.P
LMN.QCI.4
1526728022
L.ERAB.AbnormRel.HOOut.P
LMN.QCI.5
1526728023
L.ERAB.AbnormRel.HOOut.P
LMN.QCI.6
1526728024
L.ERAB.AbnormRel.HOOut.P
LMN.QCI.7
1526728025
L.ERAB.AbnormRel.HOOut.P
LMN.QCI.8
1526728026
L.ERAB.AbnormRel.HOOut.P
LMN.QCI.9
Description
The counters measure the number of abnormal E-RAB releases of a specified operator for
outgoing handovers with a specific QCI in the source cell, which are caused by corresponding
failed E-RAB setups for incoming handovers in the target cell.
Measurement Point
Figure 1-218 shows an intra-eNodeB handover, Figure 1-219 shows a handover over the X2
interface, and Figure 1-220 shows a handover over the S1 interface. As shown in point C in
Figure 1-218, Figure 1-219, or Figure 1-220, the corresponding counter is incremented by 1
in the source cell according to the QCI of each service each time the source cell abnormally
releases an E-RAB that corresponds to a failed E-RAB setup in the target cell after an outgoing
handover initiated by a UE of a specified operator is successfully performed.
Issue 06 (2011-09-30)
446
eNodeB
Performance Counter Reference
Figure 1-218
Figure 1-219
Issue 06 (2011-09-30)
447
eNodeB
Performance Counter Reference
Figure 1-220
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.ERAB.AbnormRel.HOOut
.PLMN.QCI.1
LOFD-001036
LOFD-001037
448
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.ERAB.AbnormRel.HOOut
.PLMN.QCI.2
LOFD-001036
L.ERAB.AbnormRel.HOOut
.PLMN.QCI.3
LOFD-001036
L.ERAB.AbnormRel.HOOut
.PLMN.QCI.4
LOFD-001036
L.ERAB.AbnormRel.HOOut
.PLMN.QCI.5
LOFD-001036
L.ERAB.AbnormRel.HOOut
.PLMN.QCI.6
LOFD-001036
L.ERAB.AbnormRel.HOOut
.PLMN.QCI.7
LOFD-001036
L.ERAB.AbnormRel.HOOut
.PLMN.QCI.8
LOFD-001036
L.ERAB.AbnormRel.HOOut
.PLMN.QCI.9
LOFD-001036
LOFD-001037
LOFD-001037
LOFD-001037
LOFD-001037
LOFD-001037
LOFD-001037
LOFD-001037
LOFD-001037
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526728254
L.ERAB.AbnormRel.PLMN
449
eNodeB
Performance Counter Reference
Description
The counter measures the total number of abnormal E-RAB releases of a specified operator in
a cell.
Measurement Point
Assume that a UE belongs to a specified operator. As shown in point A in Figure 1-221, the
corresponding counter is incremented by 1 each time the eNodeB sends an E-RAB RELEASE
INDICATION message to the MME and the Release Cause information element is not Normal
Release, Detach, User Inactivity, cs fallback triggered, or Inter-RAT redirection. When the
MME sends an E-RAB RELEASE COMMAND message back to the eNodeB, the counter is
not incremented repeatedly. If the E-RAB RELEASE INDICATION message requires multiple
E-RAB releases at the same time, the corresponding counter is incremented according to the
QCI of each service.
As shown in point A in Figure 1-222, the access layer bearer resources for all UEs are released
each time the eNodeB sends a UE CONTEXT RELEASE REQUEST message to the MME.
The corresponding counter is incremented according to the QCI of each service if the Release
Cause information element is not Normal Release, Detach, User Inactivity, cs fallback
triggered, or Inter-RAT redirection. When the MME sends a UE CONTEXT RELEASE
COMMAND message back to the eNodeB, the corresponding counter is not incremented
repeatedly.
Figure 1-221
Issue 06 (2011-09-30)
450
eNodeB
Performance Counter Reference
Figure 1-222
Formula
None
Unit
times
Issue 06 (2011-09-30)
451
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.ERAB.AbnormRel.PLMN
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
LOFD-001036
LOFD-001037
Counter Name
Description
1526728255
L.E-RAB.NormRel.PLMN
Description
The counter measures the total number of normal E-RAB releases of a specified operator in a
cell.
Measurement Point
Assume that a UE belongs to a specified operator. As shown in point A in Figure 1-223, the
eNodeB receives an E-RAB RELEASE COMMAND message from the MME. The counter is
incremented according to the QCI of each service each time the E-RAB release is initiated by
the MME or by the eNodeB with the Release Cause information element of Normal Release,
Detach, User Inactivity, cs fallback triggered, or Inter-RAT redirection. If the E-RAB
RELEASE COMMAND message requires multiple E-RAB releases at the same time, the
counter is incremented according to the QCI of each service.
As shown in point A in Figure 1-224, the access layer bearer resources for all UEs are released
each time the eNodeB receives a UE CONTEXT RELEASE COMMAND message from the
MME. The counter is incremented according to the QCI of each service if the E-RAB release is
initiated by the MME or by the eNodeB with the Release Cause information element of Normal
Release, Detach, User Inactivity, cs fallback triggered, or Inter-RAT redirection.
Issue 06 (2011-09-30)
452
eNodeB
Performance Counter Reference
Figure 1-223
Issue 06 (2011-09-30)
453
eNodeB
Performance Counter Reference
Figure 1-224
Formula
None
Unit
times
Issue 06 (2011-09-30)
454
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.ERAB.NormRel.PLMN
LBFD-00201801
LBFD-00201802
TDLBFD-00201801
TDLBFD-00201802
LOFD-001036
LOFD-001037
Counter Name
Description
1526728256
L.ERAB.NormRel.HOOut.PLM
N
Description
The counter measures the total number of normal E-RAB releases of a specified operator for
outgoing handovers in the source cell, which are caused by successful E-RAB setups for
incoming handovers in the target cell.
Measurement Point
Figure 1-225 shows an intra-eNodeB handover, Figure 1-226 shows a handover over the X2
interface, and Figure 1-227 shows a handover over the S1 interface. As shown in point C in
Figure 1-225, Figure 1-226, or Figure 1-227, the counter is incremented by 1 in the source cell
each time the source cell normally releases an E-RAB that corresponds to a successful E-RAB
setup in the target cell after a handover is successfully performed for the UE of a specified
operator. If multiple E-RABs are normally released during the handover, the counter is
incremented repeatedly in the source cell.
Issue 06 (2011-09-30)
455
eNodeB
Performance Counter Reference
Figure 1-225
Figure 1-226
Issue 06 (2011-09-30)
456
eNodeB
Performance Counter Reference
Figure 1-227
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.ERAB.NormRel.HOOut.P
LMN
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
Issue 06 (2011-09-30)
457
eNodeB
Performance Counter Reference
Counter Name
Description
1526728257
L.ERAB.AbnormRel.HOOut.P
LMN
Description
The counter measures the total number of abnormal E-RAB releases of a specified operator for
outgoing handovers in the source cell, which are caused by failed E-RAB setups for incoming
handovers in the target cell.
Measurement Point
Figure 1-228 shows the intra-eNodeB handover. Figure 1-229 and Figure 1-230 show the intereNodeB handovers over the X2 interface and over the S1 interface respectively. As shown in
point C in Figure 1-228, Figure 1-229, or Figure 1-230, the counter is incremented by 1 in the
source cell each time the source cell abnormally releases an E-RAB that corresponds to a failed
E-RAB setup in the target cell after a handover is successfully performed for the UE of a specified
operator. If multiple E-RABs are abnormally released during the handover, the counter is
incremented by 1 repeatedly in the source cell.
Figure 1-228
Issue 06 (2011-09-30)
458
eNodeB
Performance Counter Reference
Figure 1-229
Issue 06 (2011-09-30)
459
eNodeB
Performance Counter Reference
Figure 1-230
Formula
None
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.ERAB.AbnormRel.HOOut
.PLMN
LBFD-002008
TDLBFD-002008
LOFD-001036
LOFD-001037
Issue 06 (2011-09-30)
460
eNodeB
Performance Counter Reference
Counter
The following table describes the counters contained in the "Throughput Measurement
(Cell.Operator) (Traffic.Thruput.Cell.Operator)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526728
263
L.Thrp.bits.UL.PL
MN
V100R003C00
1526727
849
L.Thrp.bits.UL.PL
MN.QCI.1
Earlier than
V100R003C00
1526727
852
L.Thrp.bits.UL.PL
MN.QCI.2
Earlier than
V100R003C00
1526728
029
L.Thrp.bits.UL.PL
MN.QCI.3
Earlier than
V100R003C00
1526728
032
L.Thrp.bits.UL.PL
MN.QCI.4
Earlier than
V100R003C00
1526728
035
L.Thrp.bits.UL.PL
MN.QCI.5
Earlier than
V100R003C00
1526728
038
L.Thrp.bits.UL.PL
MN.QCI.6
Earlier than
V100R003C00
461
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526728
041
L.Thrp.bits.UL.PL
MN.QCI.7
Earlier than
V100R003C00
1526728
044
L.Thrp.bits.UL.PL
MN.QCI.8
Earlier than
V100R003C00
1526728
047
L.Thrp.bits.UL.PL
MN.QCI.9
Earlier than
V100R003C00
1526728
265
L.Thrp.bits.DL.PL
MN
V100R003C00
1526728
050
L.Thrp.bits.DL.PL
MN.QCI.1
Earlier than
V100R003C00
1526728
053
L.Thrp.bits.DL.PL
MN.QCI.2
Earlier than
V100R003C00
1526728
056
L.Thrp.bits.DL.PL
MN.QCI.3
Earlier than
V100R003C00
1526728
059
L.Thrp.bits.DL.PL
MN.QCI.4
Earlier than
V100R003C00
1526728
062
L.Thrp.bits.DL.PL
MN.QCI.5
Earlier than
V100R003C00
1526728
065
L.Thrp.bits.DL.PL
MN.QCI.6
Earlier than
V100R003C00
462
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526728
068
L.Thrp.bits.DL.PL
MN.QCI.7
Earlier than
V100R003C00
1526728
071
L.Thrp.bits.DL.PL
MN.QCI.8
Earlier than
V100R003C00
1526728
074
L.Thrp.bits.DL.PL
MN.QCI.9
Earlier than
V100R003C00
1526728
266
L.Thrp.Time.DL.P
LMN
V100R003C00
1526728
051
L.Thrp.Time.DL.P
LMN.QCI.1
V100R003C00
1526728
054
L.Thrp.Time.DL.P
LMN.QCI.2
V100R003C00
1526728
057
L.Thrp.Time.DL.P
LMN.QCI.3
V100R003C00
1526728
060
L.Thrp.Time.DL.P
LMN.QCI.4
V100R003C00
1526728
063
L.Thrp.Time.DL.P
LMN.QCI.5
V100R003C00
1526728
066
L.Thrp.Time.DL.P
LMN.QCI.6
V100R003C00
463
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526728
069
L.Thrp.Time.DL.P
LMN.QCI.7
V100R003C00
1526728
072
L.Thrp.Time.DL.P
LMN.QCI.8
V100R003C00
1526728
075
L.Thrp.Time.DL.P
LMN.QCI.9
V100R003C00
1526728
264
L.Thrp.Time.UL.P
LMN
V100R003C00
1526727
850
L.Thrp.Time.UL.P
LMN.QCI.1
V100R003C00
1526728
027
L.Thrp.Time.UL.P
LMN.QCI.2
V100R003C00
1526728
030
L.Thrp.Time.UL.P
LMN.QCI.3
V100R003C00
1526728
033
L.Thrp.Time.UL.P
LMN.QCI.4
V100R003C00
1526728
036
L.Thrp.Time.UL.P
LMN.QCI.5
V100R003C00
1526728
039
L.Thrp.Time.UL.P
LMN.QCI.6
V100R003C00
1526728
042
L.Thrp.Time.UL.P
LMN.QCI.7
V100R003C00
1526728
045
L.Thrp.Time.UL.P
LMN.QCI.8
V100R003C00
464
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1526728
048
L.Thrp.Time.UL.P
LMN.QCI.9
V100R003C00
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526728263
L.Thrp.bits.UL.PLMN
1526727849
L.Thrp.bits.UL.PLMN.QCI.
1
1526727852
L.Thrp.bits.UL.PLMN.QCI.
2
1526728029
L.Thrp.bits.UL.PLMN.QCI.
3
1526728032
L.Thrp.bits.UL.PLMN.QCI.
4
1526728035
L.Thrp.bits.UL.PLMN.QCI.
5
1526728038
L.Thrp.bits.UL.PLMN.QCI.
6
1526728041
L.Thrp.bits.UL.PLMN.QCI.
7
1526728044
L.Thrp.bits.UL.PLMN.QCI.
8
1526728047
L.Thrp.bits.UL.PLMN.QCI.
9
465
eNodeB
Performance Counter Reference
Description
The counters measure the uplink traffic volume of PDCP SDUs for each service with a specific
QCI in a cell of a specified operator.
Measurement Point
The uplink traffic volume of PDCP SDUs for each service with a specific QCI ranging from 1
to 9 is sampled in a cell and the size of payloads that are successfully received is accumulated.
At the end of a measurement period, the sum of these sampling results is used as the value of
the corresponding counter.
Formula
None
Unit
bit
Related Features
Counter Name
Feature ID
Feature Name
L.Thrp.bits.UL.PLMN
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.bits.UL.PLMN.Q
CI.1
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
Issue 06 (2011-09-30)
466
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.Thrp.bits.UL.PLMN.Q
CI.2
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.bits.UL.PLMN.Q
CI.3
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.bits.UL.PLMN.Q
CI.4
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.bits.UL.PLMN.Q
CI.5
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.bits.UL.PLMN.Q
CI.6
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
Issue 06 (2011-09-30)
467
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.Thrp.bits.UL.PLMN.Q
CI.7
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.bits.UL.PLMN.Q
CI.8
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.bits.UL.PLMN.Q
CI.9
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526728265
L.Thrp.bits.DL.PLMN
1526728050
L.Thrp.bits.DL.PLMN.QCI.
1
1526728053
L.Thrp.bits.DL.PLMN.QCI.
2
468
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1526728056
L.Thrp.bits.DL.PLMN.QCI.
3
1526728059
L.Thrp.bits.DL.PLMN.QCI.
4
1526728062
L.Thrp.bits.DL.PLMN.QCI.
5
1526728065
L.Thrp.bits.DL.PLMN.QCI.
6
1526728068
L.Thrp.bits.DL.PLMN.QCI.
7
1526728071
L.Thrp.bits.DL.PLMN.QCI.
8
1526728074
L.Thrp.bits.DL.PLMN.QCI.
9
Description
The counters measure the downlink traffic volume of PDCP SDUs for each service with a
specific QCI in a cell of a specified operator.
Measurement Point
The downlink traffic volume of PDCP SDUs for each service with a specific QCI ranging from
1 to 9 is sampled in a cell and the size of payloads that are successfully transmitted is
accumulated. At the end of a measurement period, the sum of these sampling results is used as
the value of the corresponding counter.
Formula
None
Unit
bit
Issue 06 (2011-09-30)
469
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.Thrp.bits.DL.PLMN
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.bits.DL.PLMN.Q
CI.1
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.bits.DL.PLMN.Q
CI.2
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.bits.DL.PLMN.Q
CI.3
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
Issue 06 (2011-09-30)
470
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.Thrp.bits.DL.PLMN.Q
CI.4
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.bits.DL.PLMN.Q
CI.5
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.bits.DL.PLMN.Q
CI.6
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.bits.DL.PLMN.Q
CI.7
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.bits.DL.PLMN.Q
CI.8
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
Issue 06 (2011-09-30)
471
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.Thrp.bits.DL.PLMN.Q
CI.9
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526728266
L.Thrp.Time.DL.PLMN
1526728051
L.Thrp.Time.DL.PLMN.QC
I.1
1526728054
L.Thrp.Time.DL.PLMN.QC
I.2
1526728057
L.Thrp.Time.DL.PLMN.QC
I.3
1526728060
L.Thrp.Time.DL.PLMN.QC
I.4
1526728063
L.Thrp.Time.DL.PLMN.QC
I.5
1526728066
L.Thrp.Time.DL.PLMN.QC
I.6
1526728069
L.Thrp.Time.DL.PLMN.QC
I.7
472
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1526728072
L.Thrp.Time.DL.PLMN.QC
I.8
1526728075
L.Thrp.Time.DL.PLMN.QC
I.9
Description
The counters measure the transmit duration of downlink PDCP SDUs of each service with a
specific QCI in a cell of a specified operator.
Measurement Point
The transmit duration of downlink PDCP SDUs for services with a specific QCI ranging from
1 to 9 is sampled per millisecond. If there is downlink data transmission within this millisecond,
the sampling result of the corresponding counter is 1. At the end of a measurement period, the
sum of these sampling results is used as the value of the corresponding counter.
Formula
None
Unit
ms
Related Features
Counter Name
Feature ID
Feature Name
L.Thrp.Time.DL.PLMN
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
Issue 06 (2011-09-30)
473
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.Thrp.Time.DL.PLMN.
QCI.1
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.Time.DL.PLMN.
QCI.2
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.Time.DL.PLMN.
QCI.3
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.Time.DL.PLMN.
QCI.4
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.Time.DL.PLMN.
QCI.5
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
Issue 06 (2011-09-30)
474
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.Thrp.Time.DL.PLMN.
QCI.6
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.Time.DL.PLMN.
QCI.7
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.Time.DL.PLMN.
QCI.8
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.Time.DL.PLMN.
QCI.9
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
Issue 06 (2011-09-30)
475
eNodeB
Performance Counter Reference
Counter Name
Description
1526728264
L.Thrp.Time.UL.PLMN
1526727850
L.Thrp.Time.UL.PLMN.QC
I.1
1526728027
L.Thrp.Time.UL.PLMN.QC
I.2
1526728030
L.Thrp.Time.UL.PLMN.QC
I.3
1526728033
L.Thrp.Time.UL.PLMN.QC
I.4
1526728036
L.Thrp.Time.UL.PLMN.QC
I.5
1526728039
L.Thrp.Time.UL.PLMN.QC
I.6
1526728042
L.Thrp.Time.UL.PLMN.QC
I.7
1526728045
L.Thrp.Time.UL.PLMN.QC
I.8
1526728048
L.Thrp.Time.UL.PLMN.QC
I.9
Description
The counters measure the receive duration of uplink PDCP SDUs for each service with a specific
QCI in a cell of a specified operator.
Measurement Point
The uplink PDCP SDU transmission for each service with a specific QCI ranging from 1 to 9
in a cell of a specified operator is sampled per millisecond. If there is uplink data transmission
Issue 06 (2011-09-30)
476
eNodeB
Performance Counter Reference
within this millisecond, the sampling result of the corresponding counter is 1. At the end of a
measurement period, the sum of these sampling results is used as the value of the corresponding
counter.
Formula
None
Unit
ms
Related Features
Counter Name
Feature ID
Feature Name
L.Thrp.Time.UL.PLMN
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.Time.UL.PLMN.
QCI.1
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.Time.UL.PLMN.
QCI.2
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
Issue 06 (2011-09-30)
477
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.Thrp.Time.UL.PLMN.
QCI.3
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.Time.UL.PLMN.
QCI.4
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.Time.UL.PLMN.
QCI.5
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.Time.UL.PLMN.
QCI.6
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.Time.UL.PLMN.
QCI.7
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
Issue 06 (2011-09-30)
478
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
L.Thrp.Time.UL.PLMN.
QCI.8
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
L.Thrp.Time.UL.PLMN.
QCI.9
LBFD-002008
LOFD-001036
LOFD-001037
LBFD-002025
TDLBFD-002008
TDLBFD-002025
Counter
The following table describes the counters contained in the "User Number Measurement
(Cell.Operator) (Traffic.User.Cell.Operator)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526728
077
L.Traffic.User.Avg.
PLMN
Earlier than
V100R003C00
479
eNodeB
Performance Counter Reference
Counter Name
Description
1526728077
L.Traffic.User.Avg.PLMN
Description
The counter measures the average number of users in a cell of a specified operator.
Measurement Point
The number of all connected synchronization and asynchronization users in a cell is sampled
per second based on the operator. At the end of a measurement period, the average of these
sampling results is used as the value of the counter.
Formula
None
Unit
None
Related Features
Counter Name
Feature ID
Feature Name
L.Traffic.User.Avg.PLM
N
LBFD-002007
LOFD-001036
LOFD-001037
TDLBFD-002007
Issue 06 (2011-09-30)
480
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
481
eNodeB
Performance Counter Reference
Description
Counter
The following table describes the counters contained in the "Board CPU Measurement
(Board.CPU)" measurement unit:
Counte
r ID
Counter Name
Description
Original Release
1526727
013
L.Board.CPU.Peak
ProcessorUsage
Earlier than
V100R003C00
1526727
014
L.Board.CPU.Mea
nProcessorUsage
Earlier than
V100R003C00
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727013
L.Board.CPU.PeakProcessorUsage
482
eNodeB
Performance Counter Reference
Description
The counter measures the maximum CPU usage of the LMPT and LBBP within a measurement
period. It represents the upper limit of the CPU usage of a board within a period.
Measurement Point
The CPU usage of a board is sampled per second. At the end of a measurement period, the
maximum of these sampling results is used as the value of the counter.
Formula
None
Unit
%
Related Features
Counter Name
Feature ID
Feature Name
L.Board.CPU.PeakProcessorUsage
LBFD-004009
TDLBFD-004009
Counter Name
Description
1526727014
L.Board.CPU.MeanProcessorUsage
Description
The counter measures the average CPU usage of the LMPT and LBBP within a measurement
period. It represents the CPU usage of a board within a period.
Measurement Point
The CPU usage of a board is sampled per second. At the end of a measurement period, the
average of these sampling results is used as the value of the counter.
Formula
None
Issue 06 (2011-09-30)
483
eNodeB
Performance Counter Reference
Unit
%
Related Features
Counter Name
Feature ID
Feature Name
L.Board.CPU.MeanProcessorUsage
LBFD-004009
TDLBFD-004009
Description
Counter
The following table describes the counters contained in the "RRU Measurement (RRU.Device)"
measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1526727
065
L.Device.RRU.EnergyConsume
Earlier than
V100R003C00
484
eNodeB
Performance Counter Reference
Counter Name
Description
1526727065
L.Device.RRU.EnergyConsume
Description
The counter measures the total power consumption of the RRU or RFU within a measurement
period. It provides a reference for energy conservation policies.
Measurement Point
The power consumption of each RRU or RFU is sampled every 30 seconds. At the end of a
measurement period, the sum of these sampling results is used as the value of the counter.
Formula
None
Unit
kWh
Related Features
Counter Name
Feature ID
Feature Name
L.Device.RRU.EnergyConsume
LOFD-001041
TDLOFD-001041
Issue 06 (2011-09-30)
Measurement Unit
Description
485
eNodeB
Performance Counter Reference
Counter
The following table describes the counters contained in the "BBU Measurement (BBU.Device)"
measurement unit:
Counte
r ID
Counter Name
Description
Original Release
1526727
551
L.Device.BBU.EnergyConsume
Earlier than
V100R003C00
Counter Name
Description
1526727551
L.Device.BBU.EnergyConsume
Description
The counter measures the total power consumption of the BBU within a measurement period.
It provides a reference for energy conservation policies.
Measurement Point
The power of all configured and detected boards in the BBU subrack is sampled per second. At
the end of a measurement period, the sum of these sampling results is used to calculate the value
of the counter.
Formula
None
Unit
kWh
Issue 06 (2011-09-30)
486
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.Device.BBU.EnergyConsume
LOFD-001041
TDLOFD-001041
Counter
The following table describes the counters contained in the "eNodeB Measurement
(eNodeB.Device)" measurement unit:
Counte
r ID
Counter Name
Description
Original Release
1526728
153
L.Device.eNodeB.E
nergyConsume
Earlier than
V100R003C00
1526728
210
L.Device.eNodeB.E
nergy.Measure
V100R003C00
1526728
215
L.Device.eNodeB.P
SU.IntelligentShutdownTime
V100R003C00
Counter Name
Description
1526728153
L.Device.eNodeB.EnergyConsume
Description
The counter measures the total power consumption of the eNodeB by measuring the power of
all boards in the BBU subrack within a measurement period. It provides a reference for energy
conservation policies.
Issue 06 (2011-09-30)
487
eNodeB
Performance Counter Reference
Measurement Point
The eNodeB power consumption is sampled every five minutes based on the rated power of all
configured and detected boards in the BBU subrack and the power of RRUs/RFUs. At the end
of a measurement period, the sum of these sampling results is used as the value of the counter.
Formula
None
Unit
kWh
Related Features
Counter Name
Feature ID
Feature Name
L.Device.eNodeB.EnergyConsume
LOFD-001041
TDLOFD-001041
Counter Name
Description
1526728210
L.Device.eNodeB.Energy.M
easure
Description
The counter measures the total power consumption of the eNodeB measured by the PMU within
a measurement period. It provides a reference for energy conservation policies.
Measurement Point
The power consumption of the BBU measured by the PMU is sampled every five minutes. At
the end of a measurement period, the sum of these sampling results is used as the value of the
counter.
Formula
None
Unit
kWh
Issue 06 (2011-09-30)
488
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
L.Device.eNodeB.Energ
y.Measure
LOFD-001041
TDLOFD-001041
Counter Name
Description
1526728215
L.Device.eNodeB.PSU.IntelligentShutdownTime
Description
The counter measures the duration of PSU intelligent shutdown within a measurement period.
It provides a reference for energy conservation policies.
Measurement Point
The duration of PSU intelligent shutdown is sampled per minute. At the end of a measurement
period, the sum of these sampling results is used as the value of the counter.
A deviation of one sampling period may be caused in the sampling timer when the timer performs
time synchronization. As a result, a deviation of one sampling period will also be generated in
the value of this counter, which affects the values of the KPIs that are calculated by using this
counter. The effects vary depending on the deviation in the value of this counter and calculation
formulas for the KPIs.
Formula
None
Unit
s
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.Device.eNodeB.PSU.I
ntelligentShutdownTime
LOFD-001041
TDLOFD-001041
489
eNodeB
Performance Counter Reference
Counter
The following table describes the counters contained in the "eNodeB LCS Measurement
(LCS.ENODEB)" measurement unit:
Counte
r ID
Counter Name
Description
Original Release
1526728
156
L.LCS.OtdoaMeas.
Req
Number of OTDOA
measurement attempts received
by an eNodeB
V100R003C00
1526728
157
L.LCS.OtdoaMeas.
Succ
V100R003C00
Counter Name
Description
1526728156
L.LCS.OtdoaMeas.Req
Description
This counter measures the number of LCS OTDOA Information Request messages received by
the eNodeB. The LCS OTDOA Information Request message is an LPPa signaling message sent
from the E-SMLC to an eNodeB. The messaged is used to request the OTDOA assistance data
for positioning a target UE of the eNodeB.
Measurement Point
The L.LCS.OtdoaMeas.Req counter is incremented by 1 each time the eNodeB receives an LCS
OTDOA Information Request message.
Formula
None
Issue 06 (2011-09-30)
490
eNodeB
Performance Counter Reference
Unit
times
Related Features
Counter Name
Feature ID
Feature Name
L.LCS.OtdoaMeas.Req
LOFD-001047
LoCation Services(LCS)
TDLOFD-001047
LoCation Services(LCS)
Counter Name
Description
1526728157
L.LCS.OtdoaMeas.Succ
Description
This counter measures the number of LCS OTDOA Information Response messages sent by the
eNodeB. The LCS OTDOA Information Response message is an LPPa signaling message sent
from an eNodeB to the E-SMLC.The messaged is used to report the OTDOA-related
configuration data of the associated cell controlled by the eNodeB.
Measurement Point
The L.LCS.OtdoaMeas.Succ counter is incremented by 1 each time the eNodeB sends an LCS
OTDOA Information Response message.
Formula
None
Unit
times
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.LCS.OtdoaMeas.Succ
LOFD-001047
LoCation Services(LCS)
TDLOFD-001047
LoCation Services(LCS)
491
eNodeB
Performance Counter Reference
Description
Counter
The following table describes the counters contained in the "PMU Measurement (PMU.Device)"
measurement unit:
Counte
r ID
Counter Name
Description
Original Release
1526727
549
L.Device.PMU.EnergyConsume
Earlier than
V100R003C00
Counter Name
Description
1526727549
L.Device.PMU.EnergyConsume
Description
The counter measures the total power consumption of the Power Monitoring Unit (PMU) within
a measurement period. It provides a reference for energy conservation policies.
Issue 06 (2011-09-30)
492
eNodeB
Performance Counter Reference
Measurement Point
The power consumption of each PMU is sampled every 30 seconds. At the end of a measurement
period, the sum of these sampling results is used as the value of the counter.
Formula
None
Unit
kWh
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
L.Device.PMU.EnergyConsume
LOFD-001041
TDLOFD-001041
493
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
494
eNodeB
Performance Counter Reference
Description
Counter
The following table describes the counters contained in the "Ethernet Port Measurement (FEGE)
(Physical.FEGE)" measurement unit:
Issue 06 (2011-09-30)
495
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1542455
297
FEGE.TxBytes
Earlier than
V100R003C00
1542455
299
FEGE.RxBytes
Earlier than
V100R003C00
1542455
298
FEGE.TxPackets
Earlier than
V100R003C00
1542455
300
FEGE.RxPackets
Earlier than
V100R003C00
1542455
301
FEGE.RxErrPackets
Earlier than
V100R003C00
1542455
302
FEGE.TxMaxSpee
d
Earlier than
V100R003C00
1542455
303
FEGE.TxMinSpee
d
Earlier than
V100R003C00
1542455
304
FEGE.TxMeanSpe
ed
Earlier than
V100R003C00
1542455
305
FEGE.RxMaxSpee
d
Earlier than
V100R003C00
1542455
306
FEGE.RxMinSpee
d
Earlier than
V100R003C00
1542455
307
FEGE.RxMeanSpe
ed
Earlier than
V100R003C00
Counter Name
Description
1542455297
FEGE.TxBytes
1542455299
FEGE.RxBytes
Description
The counters measure the number of bytes in the packets successfully transmitted and
successfully received on the Ethernet port within a measurement period, respectively. They
Issue 06 (2011-09-30)
496
eNodeB
Performance Counter Reference
indicate the traffic on the Ethernet port at the data link layer. These counters measure the
destination MAC address, source MAC address, type or length, data, and checksum of the MAC
frame, as shown in Figure 1.
Measurement Point
The number of bytes in the packets successfully transmitted or successfully received on the
Ethernet port is sampled per second. At the end of a measurement period, the sum of these
sampling results is used as the value of the corresponding counter.
Figure 3-2
Formula
None
Unit
byte
Related Features
Counter Name
Feature ID
Feature Name
FEGE.TxBytes
None
None
FEGE.RxBytes
None
None
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1542455298
FEGE.TxPackets
1542455300
FEGE.RxPackets
497
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1542455301
FEGE.RxErrPackets
Description
The counters measure the number of transmitted packets, received packets, or error packets on
the Ethernet port within a measurement period. They indicate the traffic on and the transmission
quality of the Ethernet port at the data link layer. The FEGE.RxErrPackets counter measures the
number of error packets received on physical links and failed in CRC checks.
Measurement Point
The number of transmitted packets, received packets, or error packets is sampled per second. At
the end of a measurement period, the sum of these sampling results is used as the value of the
corresponding counter.
Formula
None
Unit
packet
Related Features
Counter Name
Feature ID
Feature Name
FEGE.TxPackets
None
None
FEGE.RxPackets
None
None
FEGE.RxErrPackets
None
None
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1542455302
FEGE.TxMaxSpeed
1542455303
FEGE.TxMinSpeed
1542455304
FEGE.TxMeanSpeed
1542455305
FEGE.RxMaxSpeed
498
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1542455306
FEGE.RxMinSpeed
1542455307
FEGE.RxMeanSpeed
Description
The counters measure the transmit rate and the receive rate on the Ethernet port within a
measurement period. They indicate the traffic on the Ethernet port at the data link layer.
Measurement Point
The transmit rate or the receive rate on the Ethernet port is sampled per second. At the end of a
measurement period, the maximum, minimum, or average of these sampling results is used as
the value of the corresponding counter.
Formula
Maximum transmit or receive rate = Max(S1,S2,S3Sn). In this formula, Sn represents the
transmit or receive rate at second n.
Minimum transmit or receive rate = Min(S1,S2,S3Sn). In this formula, Sn represents the
transmit or receive rate at second n.
Average transmit or receive rate = Sum(S1,S2,S3Sn). In this formula, Sn represents the
transmit or receive rate at second n.
Unit
bit/s
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
FEGE.TxMaxSpeed
None
None
FEGE.TxMinSpeed
None
None
FEGE.TxMeanSpeed
None
None
FEGE.RxMaxSpeed
None
None
FEGE.RxMinSpeed
None
None
FEGE.RxMeanSpeed
None
None
499
eNodeB
Performance Counter Reference
Description
Measurement related to IP
Counter
The following table describes the counters contained in the "IP Measurement (IP) (Network.IP)"
measurement unit:
Issue 06 (2011-09-30)
500
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1542455
327
IP.TxBytes
Earlier than
V100R003C00
1542455
329
IP.TxDropBytes
Earlier than
V100R003C00
1542455
331
IP.RxBytes
Earlier than
V100R003C00
1542455
333
IP.RxDropBytes
Earlier than
V100R003C00
1542455
326
IP.TxPackets
Number of successfully
transmitted IP packets
Earlier than
V100R003C00
1542455
328
IP.TxDropPkts
Earlier than
V100R003C00
1542455
330
IP.RxPackets
Earlier than
V100R003C00
1542455
332
IP.RxDropPkts
Earlier than
V100R003C00
Counter Name
Description
1542455327
IP.TxBytes
1542455329
IP.TxDropBytes
1542455331
IP.RxBytes
1542455333
IP.RxDropBytes
Description
These counters measure the number of bytes in the successfully transmitted, successfully
received, or discarded IP packets within a measurement period. They indicate the traffic and the
processing capability of the eNodeB at the network layer.
Issue 06 (2011-09-30)
501
eNodeB
Performance Counter Reference
Measurement Point
The number of bytes in the successfully transmitted, successfully received, or discarded IP
packets is sampled per second. At the end of a measurement period, the sum of these sampling
results is used as the value of the corresponding counter.
The IP.TxBytes counter measures the number of bytes in the IP packets successfully transmitted
when the routing table and ARP table are found successfully. It includes the IP header and
payload (or IPSec-related payload such as AH header and ESP header in IPSec scenarios), as
shown in Figure 3-4. If packets need to be fragmented, this counter is incremented after
fragment.
The IP.RxBytes counter measures the number of bytes in the IP packets successfully received
from the data link layer. It includes the IP header and payload (or IPSec-related payload such
as AH header and ESP header in IPSec scenarios), as shown in Figure 3-4. If packets are
fragmented, this counter is incremented before packet reassembly.
The IP.TxDropBytes counter is incremented in any of the following conditions: (1) The forward
information base (FIB) fails to be found. (2) The address of the FIB table is invalid. (3) The FIB
table is invalid. (4) During the configuration of the routing load sharing, the configuration is
incorrect or the routing table is invalid.
The IP.RxDropBytes counter is incremented in any of the following conditions: (1) The IP header
check fails. (2) Packet reassembly fails. (3) Broadcast packets are discarded when the access
control list (ACL) filtering function is enabled.
Figure 3-4
Formula
None
Unit
byte
Issue 06 (2011-09-30)
502
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
IP.TxBytes
LOFD-003011
TDLOFD-003011
LOFD-003011
TDLOFD-003011
IP.RxBytes
LOFD-003011
TDLOFD-003011
IP.RxDropBytes
LOFD-003011
TDLOFD-003011
Counter Name
Description
1542455326
IP.TxPackets
1542455328
IP.TxDropPkts
1542455330
IP.RxPackets
1542455332
IP.RxDropPkts
Description
These counters measure the number of IP packets successfully transmitted, successfully
received, or discarded within a measurement period. They indicate the traffic on and the
processing capability of the eNodeB at the network layer.
Measurement Point
The number of IP packets successfully transmitted, successfully received, or discarded is
sampled per second. At the end of a measurement period, the sum of these sampling results is
used as the value of the corresponding counter.
Issue 06 (2011-09-30)
503
eNodeB
Performance Counter Reference
The IP.TxPackets counter measures the number of IP packets successfully transmitted when the
routing table and ARP table are found successfully. The counter is incremented after fragment.
The IP.RxPackets counter measures the number of IP packets successfully received from the
data link layer. This counter is incremented before reassembly.
The IP.TxDropPkts counter measures the number of transmitted IP packets discarded. It is
incremented in any of the following conditions: (1) The forward information base (FIB) fails to
be found. (2) The address of the FIB table is invalid. (3) The FIB table is invalid. (4) During the
configuration of the routing load sharing, the configuration is incorrect or the routing table is
invalid.
The IP.RxDropPkts counter measures the number of received IP packets discarded. It is
incremented in any of the following conditions: (1) The IP header check fails. (2) Packet
reassembly fails. (3) Broadcast packets are discarded when the access control list (ACL) filtering
function is enabled.
Formula
None
Unit
packet
Related Features
Counter Name
Feature ID
Feature Name
IP.TxPackets
LOFD-003011
TDLOFD-003011
LOFD-003011
TDLOFD-003011
IP.RxPackets
LOFD-003011
TDLOFD-003011
IP.RxDropPkts
LOFD-003011
TDLOFD-003011
Issue 06 (2011-09-30)
504
eNodeB
Performance Counter Reference
Description
Issue 06 (2011-09-30)
505
eNodeB
Performance Counter Reference
Counter
The following table describes the counters contained in the "IP Path Measurement (IP Path)
(Transport.IPPath)" measurement unit:
Counte
r ID
Counter Name
Description
Original Release
1542455
393
IPPath.TxRtBytes
Earlier than
V100R003C00
1542455
397
IPPath.RxRtBytes
Earlier than
V100R003C00
1542455
392
IPPath.TxRtPkts
Earlier than
V100R003C00
1542455
396
IPPath.RxRtPkts
Earlier than
V100R003C00
1542455
401
IPPath.TxNrtBytes
Earlier than
V100R003C00
1542455
405
IPPath.RxNrtBytes
Earlier than
V100R003C00
1542455
400
IPPath.TxNrtPkts
Earlier than
V100R003C00
1542455
404
IPPath.RxNrtPkts
Earlier than
V100R003C00
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1542455393
IPPath.TxRtBytes
1542455397
IPPath.RxRtBytes
506
eNodeB
Performance Counter Reference
Description
These counters measure the number of bytes in the IP packets successfully transmitted and
received on an IP path within a measurement period, respectively. They indicate the real-time
service traffic at the IP layer on the IP path. Real-time services include voice services, video on
demand (real-time streams), and real-time games. Real-time service data is generally the UDPbased stream media data.
Measurement Point
The number of bytes in the real-time service packets successfully transmitted or successfully
received on the IP path is sampled per second. At the end of a measurement period, the sum of
these sampling results is used as the value of the corresponding counter.
The counter includes the IP header and payload, as shown in Figure 3-6.
In IPSec scenarios, the IPPath.RxRtBytes counter measures the number of bytes in the decrypted
IP packets successfully received after reassembly, and the IPPath.TxRtBytes counter measures
the number of bytes in the encrypted IP packets successfully transmitted before fragment.
In non-IPSec scenarios, the IPPath.RxRtBytes counter measures the number of bytes in the IP
packets successfully received after reassembly, and the IPPath.TxRtBytes counter measures the
number of bytes in the IP packets successfully transmitted before fragment.
The measurement is triggered in the following conditions:
(1) IP path performance measurement is enabled.
(2) Real-time services are provided.
Figure 3-6
Formula
None
Unit
byte
Issue 06 (2011-09-30)
507
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
IPPath.TxRtBytes
LOFD-003011
TDLOFD-003011
LOFD-003011
TDLOFD-003011
Counter Name
Description
1542455392
IPPath.TxRtPkts
1542455396
IPPath.RxRtPkts
Description
These counters measure the number of IP packets successfully transmitted and received on an
IP path within a measurement period, respectively. They indicate the real-time service traffic at
the IP layer on the IP path. Real-time services include voice services, video on demand (realtime streams), and real-time games. Real-time service data is generally the UDP-based stream
media data.
Measurement Point
The number of real-time service packets transmitted or received on the IP path is sampled per
second. At the end of a measurement period, the sum of these sampling results is used as the
value of the corresponding counter.
The measurement is triggered in the following conditions:
(1) IP path performance measurement is enabled.
(2) Real-time services are provided.
Formula
None
Issue 06 (2011-09-30)
508
eNodeB
Performance Counter Reference
Unit
packet
Related Features
Counter Name
Feature ID
Feature Name
IPPath.TxRtPkts
LOFD-003011
TDLOFD-003011
LOFD-003011
TDLOFD-003011
Counter Name
Description
1542455401
IPPath.TxNrtBytes
1542455405
IPPath.RxNrtBytes
Description
These counters measure the number of bytes in the IP packets successfully transmitted and
received on an IP path within a measurement period, respectively. They indicate the non-realtime service traffic at the IP layer on the IP path. Non-real-time services include video on demand
(that is, buffer streams), interactive games, and TCP-based data streams.
Measurement Point
The number of bytes in the non-real-time service packets successfully transmitted or successfully
received on the IP path is sampled per second. At the end of a measurement period, the sum of
these sampling results is used as the value of the corresponding counter.
The counter includes the IP header and payload, as shown in Figure 3-7.
In IPSec scenarios, the IPPath.RxNrtBytes counter measures the number of bytes in the
decrypted IP packets successfully received after reassembly, and the IPPath.TxNrtBytes counter
measures the number of bytes in the encrypted IP packets successfully transmitted before
fragment.
Issue 06 (2011-09-30)
509
eNodeB
Performance Counter Reference
In non-IPSec scenarios, the IPPath.RxNrtBytes counter measures the number of bytes in the IP
packets successfully received after reassembly, and the IPPath.TxNrtBytes counter measures
the number of bytes in the IP packets successfully transmitted before fragment.
The measurement is triggered in the following conditions:
(1) IP path performance measurement is enabled.
(2) Non-real-time services are provided.
Figure 3-7
Formula
None
Unit
byte
Related Features
Counter Name
Feature ID
Feature Name
IPPath.TxNrtBytes
LOFD-003011
TDLOFD-003011
LOFD-003011
TDLOFD-003011
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1542455400
IPPath.TxNrtPkts
510
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1542455404
IPPath.RxNrtPkts
Description
These counters measure the number of IP packets successfully transmitted and received on an
IP path within a measurement period, respectively. They indicate the non-real-time service traffic
at the IP layer on the IP path. Non-real-time services include video on demand (that is, buffer
streams), interactive games, and TCP-based data streams.
Measurement Point
The number of non-real-time service packets transmitted or received on the IP path is sampled
per second. At the end of a measurement period, the sum of these sampling results is used as the
value of the corresponding counter.
The measurement is triggered in the following conditions:
(1) IP path performance measurement is enabled.
(2) Non-real-time services are provided.
Formula
None
Unit
packet
Related Features
Counter Name
Feature ID
Feature Name
IPPath.TxNrtPkts
LOFD-003011
TDLOFD-003011
LOFD-003011
TDLOFD-003011
Issue 06 (2011-09-30)
511
eNodeB
Performance Counter Reference
Description
Issue 06 (2011-09-30)
512
eNodeB
Performance Counter Reference
Counter
The following table describes the counters contained in the "Resource Group Measurement
(Resource Group) (Transport.RscGroup)" measurement unit:
Counte
r ID
Counter Name
Description
Original Release
1542455
365
RscGroup.TxBytes
Earlier than
V100R003C00
1542455
369
RscGroup.TxDropBytes
Earlier than
V100R003C00
1542455
367
RscGroup.TxPkts
Earlier than
V100R003C00
1542455
371
RscGroup.TxDrop
Pkts
Earlier than
V100R003C00
1542455
375
RscGroup.TxMaxSpeed
Earlier than
V100R003C00
1542455
376
RscGroup.TxMinSpeed
Earlier than
V100R003C00
1542455
377
RscGroup.TxMean
Speed
Earlier than
V100R003C00
Counter Name
Description
1542455365
RscGroup.TxBytes
1542455369
RscGroup.TxDropBytes
Description
The counters measure the number of bytes in the packets transmitted by all the queues of a
resource group at the data link layer within a measurement period and the number of bytes in
the packets discarded due to congestion in the queues within a measurement period. They
Issue 06 (2011-09-30)
513
eNodeB
Performance Counter Reference
represent the transmit traffic on the resource group at the data link layer. If the resource group
is carried on an Ethernet port, the counters measure the MAC headers and payloads in the packets.
If the resource group is carried on a port carrying a PPP link or MLPPP link, the counters measure
the data parts of the PPP frames or MLPPP frames. Figure 1 shows the measured fields. The
measurement of the counters remains unchanged in packet fragment or IPSec scenarios.
Measurement Point
The number of bytes in the packets transmitted by the resource group is sampled per second. At
the end of a measurement period, the sum of these sampling results is used as the value of the
corresponding counter.
Figure 3-9
Formula
None
Unit
byte
Related Features
Counter Name
Feature ID
Feature Name
RscGroup.TxBytes
LOFD-003011
TDLOFD-003011
LOFD-003011
TDLOFD-003011
Issue 06 (2011-09-30)
514
eNodeB
Performance Counter Reference
Counter Name
Description
1542455367
RscGroup.TxPkts
1542455371
RscGroup.TxDropPkts
Description
The counters measure the number of IP packets transmitted by all the queues of a resource group
at the data link layer within a measurement period and the number of packets discarded due to
congestion in the queues within a measurement period. They represent the transmit traffic on
the resource group at the data link layer.
Measurement Point
The number of packets successfully transmitted by the resource group is sampled per second.
At the end of a measurement period, the sum of these sampling results is used as the value of
the corresponding counter.
Formula
None
Unit
packet
Related Features
Counter Name
Feature ID
Feature Name
RscGroup.TxPkts
LOFD-003011
TDLOFD-003011
LOFD-003011
TDLOFD-003011
Issue 06 (2011-09-30)
515
eNodeB
Performance Counter Reference
Counter Name
Description
1542455375
RscGroup.TxMaxSpeed
1542455376
RscGroup.TxMinSpeed
1542455377
RscGroup.TxMeanSpeed
Description
The counters measure the transmit rate of a resource group within a measurement period. They
represent the transmission rate of the resource group. If the resource group is carried on an
Ethernet port, the counters measure the MAC headers and payloads. If the resource group is
carried on the PPP or MP group port, the counters measure the information part of the PPP frame
or MP frame.
Measurement Point
The transmit rate of the resource group is sampled per second. At the end of a measurement
period, the maximum, minimum, or average of these sampling results is used as the value of the
corresponding counter.
Formula
Maximum transmit rate = Max (S1, S2, S3, ..., Sn), where Sn represents the receive rate at second
n.
Minimum transmit rate = Min (S1, S2, S3, ..., Sn), where Sn represents the receive rate at second
n.
Average transmit rate = (S1 + S2 + S3 + ... + Sn)/n, where Sn represents the receive rate at second
n.
Unit
bit/s
Related Features
Counter Name
Feature ID
Feature Name
RscGroup.TxMaxSpeed
LOFD-003011
TDLOFD-003011
Issue 06 (2011-09-30)
516
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
RscGroup.TxMinSpeed
LOFD-003011
TDLOFD-003011
LOFD-003011
TDLOFD-003011
Description
Measurement related to IP PM
Issue 06 (2011-09-30)
517
eNodeB
Performance Counter Reference
Figure 3-10
Figure 3-11
Counter
The following table describes the counters contained in the "IP PM Measurement (IP PM)
(Transport.IPPM)" measurement unit:
Issue 06 (2011-09-30)
518
eNodeB
Performance Counter Reference
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1542455
408
IPPM.Bits.MeansT
x
Earlier than
V100R003C00
1542455
409
IPPM.Pkts.Means
Tx
Earlier than
V100R003C00
1542455
410
IPPM.Peak.Bits.Ra
teTx
Earlier than
V100R003C00
1542455
411
IPPM.Peak.Pkts.R
ateTx
Earlier than
V100R003C00
1542455
412
IPPM.Peer.Bits.Me
ansRx
Earlier than
V100R003C00
1542455
413
IPPM.Peer.Pkts.M
eansRx
Earlier than
V100R003C00
1542455
414
IPPM.Peer.Peak.Bi
ts.RateRx
Earlier than
V100R003C00
1542455
415
IPPM.Peer.Peak.P
kts.RateRx
Earlier than
V100R003C00
1542455
416
IPPM.Forword.Dr
opMeans
Earlier than
V100R003C00
1542455
417
IPPM.Forword.Pea
k.DropRates
Earlier than
V100R003C00
1542455
418
IPPM.Forward.JitterStandardDeviation
Earlier than
V100R003C00
1542455
419
IPPM.Back.JitterStandardDeviation
Earlier than
V100R003C00
1542455
420
IPPM.Rtt.Means
Earlier than
V100R003C00
1542455
421
IPPM.MaxRttDela
y
Earlier than
V100R003C00
1542455
452
IPPM.MinRttDelay
Earlier than
V100R003C00
519
eNodeB
Performance Counter Reference
Counter Name
Description
1542455408
IPPM.Bits.MeansTx
1542455409
IPPM.Pkts.MeansTx
1542455410
IPPM.Peak.Bits.RateTx
1542455411
IPPM.Peak.Pkts.RateTx
1542455412
IPPM.Peer.Bits.MeansRx
1542455413
IPPM.Peer.Pkts.MeansRx
1542455414
IPPM.Peer.Peak.Bits.RateR
x
1542455415
IPPM.Peer.Peak.Pkts.RateR
x
1542455416
IPPM.Forword.DropMeans
1542455417
IPPM.Forword.Peak.DropRates
Description
The counters measure transmit rates and receive rates of the transport network on the IP
performance monitor (IP PM) within a measurement period. They indicate the transmission
capability of the transport network.
Measurement Point
The transmit rate or receive rate at the local or peer end is sampled per second on the IP PM. At
the end of a measurement period, the average or maximum of these sampling results is used as
the value of the corresponding counter.
An uplink stream contains packets with identical IP PM session ID, namely, identical quadruplet
of source IP address, destination IP address, protocol release, and DSCP.
Each time the local end transmits a packet with the same IP PM session ID, the number of
transmitted bytes and the number of transmitted packets are both incremented.
The counters are measured as follows:
The IPPM.Bits.MeansTx and IPPM.Peak.Bits.RateTx counters are sampled per second. Let Tn
be the number of accumulated transmitted bytes at second n, and Tn-1 be the number of
accumulated transmitted bytes at second n-1. Then, bit transmit rate at second n = Tn Tn-1.
At the end of a measurement period, the average of the bit transmit rates is used as the value of
the IPPM.Bits.MeansTx counter, and the maximum of the bit transmit rates is used as the value
of the IPPM.Peak.Bits.RateTx counter. Figure 3-12 shows the measured fields.
Issue 06 (2011-09-30)
520
eNodeB
Performance Counter Reference
The IPPM.Pkts.MeansTx and IPPM.Peak.Pkts.RateTx counters are sampled per second. Let Tn
be the number of accumulated transmitted packets at second n, and Tn-1 be the number of
accumulated transmitted packets at second n-1. Then, packet transmit rate at second n = Tn
Tn-1. At the end of a measurement period, the average of the packet transmit rates is used as the
value of the IPPM.Pkts.MeansTx counter, and the maximum of the packet transmit rates is used
as the value of the IPPM.Peak.Pkts.RateTx counter.
Each time the peer end receives a packet with the same IP PM session ID, the number of received
bytes and the number of received packets are both incremented.
The IPPM.Peer.Bits.MeansRx and IPPM.Peer.Peak.Bits.RateRx counters are sampled per
second. Let Rn be the number of accumulated received bytes at second n, and Rn-1 be the number
of accumulated received bytes at second n-1. Then, bit receive rate at second n = Rn Rn-1. At
the end of a measurement period, the average of the bit receive rates is used as the value of the
IPPM.Peer.Bits.MeansRx counter, and the maximum of the bit receive rates is used as the value
of the IPPM.Peer.Peak.Bits.RateRx counter. Figure 3-12 shows the measured fields.
The number of forward discarded packets on the IP PM is the difference between the number
of packets transmitted at the local end and the number of packets received at the peer end. An
increasing difference indicates packet loss occurs due to an insufficient bandwidth. In this case,
the transmit rate at the local end must be reduced accordingly based on the value of this counter.
The IPPM.Forword.DropMeans and IPPM.Forword.Peak.DropRates counters are sampled per
second. At the end of a measurement period, the average of the sampling results is used as the
value of the IPPM.Forword.DropMeans counter, and the maximum of the sampling results is
used as the value of the IPPM.Forword.Peak.DropRates counter.
Issue 06 (2011-09-30)
521
eNodeB
Performance Counter Reference
Figure 3-12
Formula
None
Unit
bit/s
Related Features
Counter Name
Feature ID
Feature Name
IPPM.Bits.MeansTx
LOFD-003012
IP Performance Monitoring
TDLOFD-003012
IP Performance Monitoring
LOFD-003012
IP Performance Monitoring
TDLOFD-003012
IP Performance Monitoring
IPPM.Pkts.MeansTx
Issue 06 (2011-09-30)
522
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
IPPM.Peak.Bits.RateTx
LOFD-003012
IP Performance Monitoring
TDLOFD-003012
IP Performance Monitoring
LOFD-003012
IP Performance Monitoring
TDLOFD-003012
IP Performance Monitoring
LOFD-003012
IP Performance Monitoring
TDLOFD-003012
IP Performance Monitoring
IPPM.Peer.Pkts.MeansR
x
LOFD-003012
IP Performance Monitoring
TDLOFD-003012
IP Performance Monitoring
IPPM.Peer.Peak.Bits.Rat
eRx
LOFD-003012
IP Performance Monitoring
TDLOFD-003012
IP Performance Monitoring
IPPM.Peer.Peak.Pkts.Rat
eRx
LOFD-003012
IP Performance Monitoring
TDLOFD-003012
IP Performance Monitoring
IPPM.Forword.DropMeans
LOFD-003012
IP Performance Monitoring
TDLOFD-003012
IP Performance Monitoring
IPPM.Forword.Peak.Dro
pRates
LOFD-003012
IP Performance Monitoring
TDLOFD-003012
IP Performance Monitoring
IPPM.Peak.Pkts.RateTx
IPPM.Peer.Bits.MeansRx
Counter Name
Description
1542455418
IPPM.Forward.JitterStandardDeviation
1542455419
IPPM.Back.JitterStandardDeviation
Description
The counters measure the standard deviation of the round trip time (RTT) jitter on the IP
performance monitor (IP PM) within a measurement period. They indicate the RTT variability
of a data flow in the transport network. The RTT variability has a positive correlation with the
value of either counter. That is, the larger the value of either counter, the more variable the RTT
becomes. The forward jitter represents the jitter in RTT of a data flow from the local end to the
peer end on the IP PM. The backward jitter represents the jitter in RTT of a data flow from the
peer end to the local end on the IP PM.
Issue 06 (2011-09-30)
523
eNodeB
Performance Counter Reference
Measurement Point
The forward or backward jitter amplitude is sampled per second on the IP PM. At the end of a
measurement period, the average of the forward jitter sampling results or the backward jitter
sampling results is used as the value of the corresponding counter.
Let T1 be the transmit time of an FM frame at the local end and T2 be the receive time of the
FM frame at the peer end. Let their difference be delta (T12). Divide the sum of delta (T12) and
the accumulated time difference by the total number of FM frames. The square root of the
quotient is used as the value of the forward jitter.
Let T3 be the transmit time of a BR frame at the peer end and T4 be the receive time of the BR
frame at the local end. Let their difference be delta (T34). Divide the sum of delta (T34) and the
accumulated time difference by the total number of BR frames. The square root of the quotient
is used as the value of the backward jitter.
The IPPM Forward JitterStandardDeviation counter measures the standard deviation of
transmission delays for FM frames.
The IPPM Back JitterStandardDeviation counter measures the standard deviation of
transmission delays for BR frames.
Formula
Standard deviation of forward jitter on the IP PM = QSqrt {[(T2 - T1) ^ 2 + T]/FM counts},
where T represents the accumulated time difference.
Standard deviation of backward jitter on the IP PM = QSqrt {[(T2 - T1) ^ 2 + T]/BR counts},
where T represents the accumulated time difference.
Unit
None
Related Features
Counter Name
Feature ID
Feature Name
IPPM.Forward.JitterStandardDeviation
LOFD-003012
IP Performance Monitoring
TDLOFD-003012
IP Performance Monitoring
IPPM.Back.JitterStandardDeviation
LOFD-003012
IP Performance Monitoring
TDLOFD-003012
IP Performance Monitoring
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1542455420
IPPM.Rtt.Means
524
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1542455421
IPPM.MaxRttDelay
1542455452
IPPM.MinRttDelay
Description
The counters measure the round trip time (RTT) of the transport network based on the IP
performance monitor (IP PM) mechanism within a measurement period. They represent the time
delay condition of the transport network.
Measurement Point
The RTT is sampled and calculated by the IP PM mechanism per second.
After forward activation is performed for an IP PM link, the local end sends FM frames and
receives BR frames periodically.
Value of the IPPM.Rtt.Means counter = Total delay of FM and BR frames/Total number of
transmitted FM frames
The maximum delay of the sampling delays of FM frames and BR frames is used as the value
of the IPPM.MaxRttDelay counter.
The minimum delay of the sampling delays of FM frames and BR frames is used as the value
of the IPPM.MinRttDelay counter.
Formula
Rtt = (T4 T1) (T3 T2)
IPPM.Rtt.Means = (Rtt1 + Rtt2 + + Rttn)/FM counts
IPPM.MaxRttDelay = Max (Rtt1, Rtt2, , Rttn)
IPPM.MaxRttDelay = Min (Rtt1, Rtt2, , Rttn)
Unit
ms
Related Features
Counter Name
Feature ID
Feature Name
IPPM.Rtt.Means
LOFD-003012
IP Performance Monitoring
TDLOFD-003012
IP Performance Monitoring
LOFD-003012
IP Performance Monitoring
TDLOFD-003012
IP Performance Monitoring
IPPM.MaxRttDelay
Issue 06 (2011-09-30)
525
eNodeB
Performance Counter Reference
Counter Name
Feature ID
Feature Name
IPPM.MinRttDelay
LOFD-003012
IP Performance Monitoring
TDLOFD-003012
IP Performance Monitoring
Description
Issue 06 (2011-09-30)
526
eNodeB
Performance Counter Reference
Counter
The following table describes the counters contained in the "SCTP Measurement (SCTP)
(Transport.Sctp)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1542455
422
Sctp.RxBytes
Earlier than
V100R003C00
1542455
423
Sctp.TxBytes
Earlier than
V100R003C00
1542455
426
Sctp.RxDropBytes
Earlier than
V100R003C00
1542455
424
Sctp.RxPkts
Number of IP packets
successfully received on the
SCTP link
Earlier than
V100R003C00
1542455
425
Sctp.TxPkts
Number of IP packets
successfully transmitted on the
SCTP link
Earlier than
V100R003C00
1542455
428
Sctp.RxDropPkts
Earlier than
V100R003C00
1542455
430
Sctp.RxMaxSpeed
Earlier than
V100R003C00
1542455
431
Sctp.RxMinSpeed
Earlier than
V100R003C00
1542455
432
Sctp.RxMeanSpeed
Earlier than
V100R003C00
1542455
433
Sctp.TxMaxSpeed
Earlier than
V100R003C00
1542455
434
Sctp.TxMinSpeed
Earlier than
V100R003C00
1542455
435
Sctp.TxMeanSpeed
Earlier than
V100R003C00
527
eNodeB
Performance Counter Reference
Counter Name
Description
1542455422
Sctp.RxBytes
1542455423
Sctp.TxBytes
1542455426
Sctp.RxDropBytes
Description
The counters measure the number of bytes in the IP packets transmitted or received on the SCTP
link within a measurement period. They represent the traffic volume of signaling services. The
Sctp.RxBytes counter measures the total number of user data bytes in IP packets successfully
received at the SCTP layer from the IP layer, excluding filler bytes, as shown in Figure 1. The
Sctp.TxBytes counter measures the total number of user data bytes in IP packets successfully
transmitted to the IP layer from the SCTP layer, excluding filler bytes, as shown in Figure 1.
The Sctp.RxDropBytes counter measures the total number of bytes in IP packets received but
discarded on the SCTP link. IP packets are discarded if they contain any of the following errors:
resolution errors, invalid data block types, and association information query failures. The
measurement of these counters remains unchanged in packet fragment or IPSec scenarios.
Measurement Point
The number of bytes in the IP packets successfully transmitted, successfully received, or
discarded on the SCTP link is sampled per second. At the end of a measurement period, the sum
of these sampling results is used as the value of the corresponding counter.
Figure 3-14
Formula
None
Unit
byte
Issue 06 (2011-09-30)
528
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
Sctp.RxBytes
None
None
Sctp.TxBytes
None
None
Sctp.RxDropBytes
None
None
Counter Name
Description
1542455424
Sctp.RxPkts
1542455425
Sctp.TxPkts
1542455428
Sctp.RxDropPkts
Description
The counters measure the number of IP packets transmitted or received on the SCTP link within
a measurement period. They represent the traffic volume of signaling services. The Sctp.RxPkts
counter measures the total number of packets successfully received on the SCTP link, including
the HEARTBEAT, DATA, INIT ACK, COOKIE ECHO, and COOKIE ACK packets. The
Sctp.TxPkts counter measures the number of packets successfully transmitted on the SCTP link,
including the HEARTBEAT, DATA, INIT ACK, COOKIE ECHO, and COOKIE ACK packets.
The Sctp.RxDropPkts counter measures the total number of discarded IP packets received on
the SCTP link, including the HEARTBEAT, DATA, INIT ACK, COOKIE ECHO, and COOKIE
ACK packets. IP packets are discarded if they contain any of the following errors: resolution
error, invalid data block types, and association information query failures.
Measurement Point
The number of IP packets successfully transmitted, successfully received, or discarded on the
SCTP link is sampled per second. At the end of a measurement period, the sum of these sampling
results is used as the value of the corresponding counter.
Formula
None
Unit
packet
Issue 06 (2011-09-30)
529
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
Sctp.RxPkts
None
None
Sctp.TxPkts
None
None
Sctp.RxDropPkts
None
None
Counter Name
Description
1542455430
Sctp.RxMaxSpeed
1542455431
Sctp.RxMinSpeed
1542455432
Sctp.RxMeanSpeed
1542455433
Sctp.TxMaxSpeed
1542455434
Sctp.TxMinSpeed
1542455435
Sctp.TxMeanSpeed
Description
The counters measure the maximum rate, minimum rate, and average rate on the SCTP link to
transmit or receive IP packets within a measure period. They represent the transmission
capability of the SCTP link.
Measurement Point
The transmit rate or the receive rate on the SCTP link is sampled per second. At the end of a
measurement period, the maximum, minimum, or average of these sampling results is used as
the value of the corresponding counter.
Formula
Maximum transmit or receive rate = Max (S1, S2, S3, ..., Sn), where Sn represents the transmit
or receive rate at second n.
Issue 06 (2011-09-30)
530
eNodeB
Performance Counter Reference
Minimum transmit or receive rate = Min(S1, S2, S3, ..., Sn), where Sn represents the transmit
or receive rate at second n.
Average transmit or receive rate = (S1 + S2 + S3 + ... + Sn)/n, where Sn represents the transmit
or receive rate at second n.
Unit
bit/s
Related Features
Counter Name
Feature ID
Feature Name
Sctp.RxMaxSpeed
None
None
Sctp.RxMinSpeed
None
None
Sctp.RxMeanSpeed
None
None
Sctp.TxMaxSpeed
None
None
Sctp.TxMinSpeed
None
None
Sctp.TxMeanSpeed
None
None
Description
Issue 06 (2011-09-30)
531
eNodeB
Performance Counter Reference
Figure 3-15
Counter
The following table describes the counters contained in the "GTP-U Measurement (GTP-U)
(Transport.Gtpu)" measurement unit:
Counte
r ID
Counter Name
Description
Original Release
1526727
075
Gtpu.RxBytes
Earlier than
V100R003C00
1526727
076
Gtpu.TxBytes
Earlier than
V100R003C00
1526727
079
Gtpu.RxDropBytes
Earlier than
V100R003C00
1526727
077
Gtpu.RxPkts
Earlier than
V100R003C00
1526727
078
Gtpu.TxPkts
Earlier than
V100R003C00
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1526727075
Gtpu.RxBytes
532
eNodeB
Performance Counter Reference
Counter ID
Counter Name
Description
1526727076
Gtpu.TxBytes
1526727079
Gtpu.RxDropBytes
Description
The counters measure the number of bytes in the packets transmitted, received, and erroneous
in the receive direction respectively within a measurement period. Both GTP-U control messages
and user data are measured, as shown in Figure 1. These counters indicate the data volume
(including the GTP-U header) on the user plane.
Measurement Point
The number of bytes in the packets transmitted, received, or erroneous in the receive direction
on the GTP-U link is sampled per second. At the end of a measurement period, the sum of these
sampling results is used as the value of the corresponding counter.
Figure 3-16
Formula
None
Unit
byte
Related Features
Issue 06 (2011-09-30)
Counter Name
Feature ID
Feature Name
Gtpu.RxBytes
None
None
Gtpu.TxBytes
None
None
Gtpu.RxDropBytes
None
None
533
eNodeB
Performance Counter Reference
Counter Name
Description
1526727077
Gtpu.RxPkts
1526727078
Gtpu.TxPkts
Description
The counters measure the number of packets successfully received or transmitted on the GTPU link within a measurement period. They indicate the data volume on the user plane.
Measurement Point
The number of packets successfully transmitted or received on the GTP-U link is sampled per
second. At the end of a measurement period, the sum of these sampling results is used as the
value of the corresponding counter.
Formula
None
Unit
packet
Related Features
Counter Name
Feature ID
Feature Name
Gtpu.RxPkts
None
None
Gtpu.TxPkts
None
None
534
eNodeB
Performance Counter Reference
Measurement Unit
Description
Counter
The following table describes the counters contained in the "E1/T1 Port Measurement (E1T1)
(Physical.E1T1)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1542455
312
E1T1.CodeViolate
Earlier than
V100R003C00
1542455
313
E1T1.FramingError
Earlier than
V100R003C00
1542455
314
E1T1.CrcError
Earlier than
V100R003C00
535
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1542455
315
E1T1.EbitError
Earlier than
V100R003C00
1542455
316
E1T1.Sa6Error
Earlier than
V100R003C00
1542455
320
E1T1.Multiframe
Earlier than
V100R003C00
1542455
321
E1T1.FrameAlignChanged
Earlier than
V100R003C00
Counter Name
Description
1542455312
E1T1.CodeViolate
Description
This counter measures the number of code type errors on the E1/T1 electrical port within a
measurement period. A code type error occurs if the line coding modes at two communicating
E1/T1 electrical ports mismatch.
Measurement Point
The number of code type errors on the E1/T1 electrical port is sampled per second. At the end
of a measurement period, the sum of these sampling results is used as the value of the counter.
Formula
None
Unit
times
Related Features
None
Issue 06 (2011-09-30)
536
eNodeB
Performance Counter Reference
3.8.1.2 Number of Base Frame Alignment Errors on the E1/T1 Electrical Port
Counter
Counter ID
Counter Name
Description
1542455313
E1T1.FramingError
Description
This counter measures the number of base frame alignment errors on the E1/T1 electrical port
within a measurement period. A base frame alignment error prohibits the precise location of
frames.
Measurement Point
The number of base frame alignment errors on the E1/T1 electrical port is sampled per second.
At the end of a measurement period, the sum of these sampling results is used as the value of
the counter.
Formula
None
Unit
times
Related Features
None
Counter Name
Description
1542455314
E1T1.CrcError
Description
This counter measures the number of CRC errors on the E1/T1 electrical port within a
measurement period. This counter is relevant only for CRC multiframes (E1) or extended
superframes (T1).
Issue 06 (2011-09-30)
537
eNodeB
Performance Counter Reference
Measurement Point
The measurement is performed per second to count the number of CRC errors on the E1/T1
electrical port, and the sum of these sampling results is calculated as the result of the
corresponding counter at the end of a measurement period.
Formula
None
Unit
times
Related Features
None
Counter Name
Description
1542455315
E1T1.EbitError
Description
This counter measures the number of Ebit errors, that is the number of cyclic redundancy check
(CRC) failures reported by the peer end, within a measurement period. The counter measures
the number of Ebit errors for CRC multi-frames (E1) or extended super-frames (T1).
Measurement Point
The number of Ebit errors on the E1/T1 port is sampled per second. At the end of a measurement
period, the sum of these sampling results is used as the value of the counter.
Formula
None
Unit
times
Related Features
None
Issue 06 (2011-09-30)
538
eNodeB
Performance Counter Reference
Counter Name
Description
1542455316
E1T1.Sa6Error
Description
This counter measures the number of Sa6 errors on the E1 port within a measurement period.
This counter is relevant only for CRC multiframes (E1 port).
Measurement Point
The measurement is performed per second to count the number of Sa6 errors on the E1 port, and
the sum of these sampling results is calculated as the result of the corresponding counter at the
end of a measurement period.
Formula
None
Unit
times
Related Features
None
Counter Name
Description
1542455320
E1T1.Multiframe
Description
This counter measures the number of multiframe cycles on the E1/T1 electrical port within a
measurement period.
Issue 06 (2011-09-30)
539
eNodeB
Performance Counter Reference
Measurement Point
The measurement is performed per second to count the number of multiframe cycles on the E1/
T1 electrical port, and the sum of these sampling results is calculated as the result of the
corresponding counter at the end of a measurement period.
Formula
None
Unit
times
Related Features
None
Counter Name
Description
1542455321
E1T1.FrameAlignChanged
Description
This counter measures the number of times that frames are not aligned within a measurement
period. It indicates the multiframe variable. This counter is relevant only for CRC multiframes
(E1) or extended superframes (T1).
Measurement Point
The measurement is performed per second to count the number of times that frames are not
aligned on the E1/T1 electrical port. Every time the multi-frames (E1) or extended super-frames
(T1) change, the counter increases by one.
Formula
None
Unit
times
Related Features
None
Issue 06 (2011-09-30)
540
eNodeB
Performance Counter Reference
Description
Counter
The following table describes the counters contained in the "PPP Measurement (PPP)
(DataLink.PPP)" measurement unit:
Issue 06 (2011-09-30)
541
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1542455
334
PPP.TxPackets
Earlier than
V100R003C00
1542455
335
PPP.TxBytes
Earlier than
V100R003C00
1542455
336
PPP.TxDropPkts
Number of Packets to Be
Transmitted but Discarded on the
PPP Link
Earlier than
V100R003C00
1542455
337
PPP.RxPackets
Earlier than
V100R003C00
1542455
338
PPP.RxBytes
Earlier than
V100R003C00
1542455
339
PPP.RxDropPkts
Earlier than
V100R003C00
1542455
343
PPP.TxMaxSpeed
Earlier than
V100R003C00
1542455
344
PPP.TxMinSpeed
Earlier than
V100R003C00
1542455
345
PPP.TxMeanSpeed
Earlier than
V100R003C00
1542455
346
PPP.RxMaxSpeed
Earlier than
V100R003C00
1542455
347
PPP.RxMinSpeed
Earlier than
V100R003C00
1542455
348
PPP.RxMeanSpeed
Earlier than
V100R003C00
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1542455334
PPP.TxPackets
542
eNodeB
Performance Counter Reference
Description
This counter measures the number of packets successfully transmitted on the PPP link within a
measurement period.
Measurement Point
The number of packets successfully transmitted on the PPP link is sampled per second. At the
end of a measurement period, the sum of these sampling results is used as the value of the counter.
Formula
None
Unit
packet
Related Features
Counter Name
Feature ID
Feature Name
PPP.TxPackets
LBFD-003004
TDLBFD-003004
3.9.1.2 Number of Bytes in the Packets Successfully Transmitted on the PPP Link
Counter
Counter ID
Counter Name
Description
1542455335
PPP.TxBytes
Description
This counter measures the number of bytes in the packets successfully transmitted on the PPP
link within a measurement period. It measures the Address field, Control field, Protocol field,
and Information field. The counter represents the traffic on the PPP link. Figure 1 shows the
measured fields.
Measurement Point
The number of bytes in the packets successfully transmitted on the PPP link is sampled per
second. At the end of a measurement period, the sum of these sampling results is used as the
value of the counter.
Issue 06 (2011-09-30)
543
eNodeB
Performance Counter Reference
Figure 3-19
Formula
None
Unit
byte
Related Features
Counter Name
Feature ID
Feature Name
PPP.TxBytes
LBFD-003004
TDLBFD-003004
Counter Name
Description
1542455336
PPP.TxDropPkts
Description
This counter measures the number of packets to be transmitted but discarded on the PPP link
within a measurement period. This counter represents the traffic on the PPP link. Received
packets are discarded if one of the following situations happens: (1) The PPP link is not stable
or activated; (2) The protocol number is incorrect, that is, the protocol number is not 0x0021,
0x0061, 0x0065, 0x0059, or 0x003d.
Measurement Point
The number of packets to be transmitted but discarded on the PPP link is sampled per second.
At the end of a measurement period, the sum of these sampling results is used as the value of
the counter.
Issue 06 (2011-09-30)
544
eNodeB
Performance Counter Reference
Formula
None
Unit
packet
Related Features
Counter Name
Feature ID
Feature Name
PPP.TxDropPkts
LBFD-003004
TDLBFD-003004
Counter Name
Description
1542455337
PPP.RxPackets
Description
This counter measures the number of packets successfully received on the PPP link within a
measurement period.
Measurement Point
The number of packets successfully received on the PPP link is sampled per second. At the end
of a measurement period, the sum of these sampling results is used as the value of the counter.
Formula
None
Unit
packet
Issue 06 (2011-09-30)
545
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
PPP.RxPackets
LOFD-003011
LBFD-003004
TDLOFD-003011
TDLBFD-003004
3.9.1.5 Number of Bytes in the Packets Successfully Received on the PPP Link
Counter
Counter ID
Counter Name
Description
1542455338
PPP.RxBytes
Description
This counter measures the number of bytes in the packets successfully received on the PPP link
within a measurement period. It measures the Address field, Control field, Protocol field, and
Information field. The counter represents the traffic on the PPP link. Figure 1 shows the measured
fields.
Measurement Point
The number of bytes in the packets received successfully on the PPP link is sampled per second.
At the end of a measurement period, the sum of these sampling results is used as the value of
the counter.
Figure 3-20
Formula
None
Issue 06 (2011-09-30)
546
eNodeB
Performance Counter Reference
Unit
byte
Related Features
Counter Name
Feature ID
Feature Name
PPP.RxBytes
LBFD-003004
TDLBFD-003004
Counter Name
Description
1542455339
PPP.RxDropPkts
Description
This counter measures the number of packets received but discarded on the PPP link within a
measurement period. This counter represents the traffic on the PPP link. Received packets are
discarded if one of the following situations happens: (1) The PPP link is not stable or activated;
(2) The protocol number is incorrect, that is, the protocol number is not 0x0021, 0x0061, 0x0065,
0x0059, or 0x003d.
Measurement Point
The number of packets received but discarded on the PPP link is sampled per second. At the end
of a measurement period, the sum of these sampling results is used as the value of the counter.
Formula
None
Unit
packet
Issue 06 (2011-09-30)
547
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
PPP.RxDropPkts
LBFD-003004
TDLBFD-003004
Counter Name
Description
1542455343
PPP.TxMaxSpeed
Description
The counter measures the maximum transmit rate on the PPP link within a measurement period.
This counter represents the traffic on the PPP link.
Measurement Point
The number of bytes transmitted on the PPP link is sampled per second. At the end of a
measurement period, the maximum of these sampling results is used to calculate the maximum
transmit rate. The maximum transmit rate is calculated through the following formula.
Formula
Maximum transmit rate = Max (S1, S2, S3, ..., Sn), where Sn represents the transmit rate at
second n.
Unit
bit/s
Related Features
Counter Name
Feature ID
Feature Name
PPP.TxMaxSpeed
LBFD-003004
TDLBFD-003004
Issue 06 (2011-09-30)
548
eNodeB
Performance Counter Reference
Counter Name
Description
1542455344
PPP.TxMinSpeed
Description
The counter measures the minimum transmit rate on the PPP link within a measurement period.
This counter represents the traffic on the PPP link.
Measurement Point
The number of bytes transmitted on the PPP link is sampled per second. At the end of a
measurement period, the minimum of these sampling results is used to calculate the minimum
transmit rate. The minimum transmit rate is calculated through the following formula.
Formula
Minimum transmit rate = Min (S1, S2, S3, ..., Sn), where Sn represents the transmit rate at second
n.
Unit
bit/s
Related Features
Counter Name
Feature ID
Feature Name
PPP.TxMinSpeed
LBFD-003004
TDLBFD-003004
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1542455345
PPP.TxMeanSpeed
549
eNodeB
Performance Counter Reference
Description
The counter measures the average transmit rate on the PPP link within a measurement period.
This counter represents the traffic on the PPP link.
Measurement Point
The number of bytes received on the PPP link is sampled per second. At the end of a measurement
period, the average of these sampling results is used to calculate the average transmit rate. The
average transmit rate is calculated through the following formula.
Formula
Average transmit rate = (S1 + S2 + S3 + ... + Sn)/n, where Sn represents the transmit rate at
second n.
Unit
bit/s
Related Features
Counter Name
Feature ID
Feature Name
PPP.TxMeanSpeed
LBFD-003004
TDLBFD-003004
Counter Name
Description
1542455346
PPP.RxMaxSpeed
Description
The counter measures the maximum receive rate on the PPP link within a measurement period.
This counter represents the traffic on the PPP link.
Measurement Point
The number of bytes received on the PPP link is sampled per second. At the end of a measurement
period, the maximum of these sampling results is used to calculate the maximum receive rate.
The maximum receive rate is calculated through the following formula.
Issue 06 (2011-09-30)
550
eNodeB
Performance Counter Reference
Formula
Maximum receive rate = Max (S1, S2, S3, ..., Sn), where Sn represents the receive rate at second
n.
Unit
bit/s
Related Features
Counter Name
Feature ID
Feature Name
PPP.RxMaxSpeed
LBFD-003004
TDLBFD-003004
Counter Name
Description
1542455347
PPP.RxMinSpeed
Description
The counter measures the minimum receive rate on the PPP link within a measurement period.
This counter represents the traffic on the PPP link.
Measurement Point
The number of bytes received on the PPP link is sampled per second. At the end of a measurement
period, the minimum of these sampling results is used to calculate the minimum receive rate.
The minimum receive rate is calculated through the following formula.
Formula
Minimum receive rate = Min (S1, S2, S3, ..., Sn), where Sn represents the receive rate at second
n.
Unit
bit/s
Issue 06 (2011-09-30)
551
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
PPP.RxMinSpeed
LBFD-003004
TDLBFD-003004
Counter Name
Description
1542455348
PPP.RxMeanSpeed
Description
The counter measures the average receive rate on the PPP link within a measurement period.
This counter represents the traffic on the PPP link.
Measurement Point
The number of bytes received on the PPP link is sampled per second. At the end of a measurement
period, the average of these sampling results is used to calculate the average receive rate. The
average receive rate is calculated through the following formula.
Formula
Average receive rate = (S1 + S2 + S3 + ... + Sn)/n, where Sn represents the receive rate at second
n.
Unit
bit/s
Related Features
Counter Name
Feature ID
Feature Name
PPP.RxMeanSpeed
LBFD-003004
TDLBFD-003004
Issue 06 (2011-09-30)
552
eNodeB
Performance Counter Reference
Description
Measurement related to MP
Counter
The following table describes the counters contained in the "MP Group Measurement (MPGRP)
(DataLink.MP)" measurement unit:
Issue 06 (2011-09-30)
553
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1542455
349
MP.TxPackets
Earlier than
V100R003C00
1542455
350
MP.TxBytes
Earlier than
V100R003C00
1542455
351
MP.TxDropPkts
Earlier than
V100R003C00
1542455
352
MP.RxPackets
Earlier than
V100R003C00
1542455
353
MP.RxBytes
Earlier than
V100R003C00
1542455
354
MP.RxDropPkts
Earlier than
V100R003C00
1542455
358
MP.TxMaxSpeed
Earlier than
V100R003C00
1542455
359
MP.TxMinSpeed
Earlier than
V100R003C00
1542455
360
MP.TxMeanSpeed
Earlier than
V100R003C00
1542455
361
MP.RxMaxSpeed
Earlier than
V100R003C00
1542455
362
MP.RxMinSpeed
Earlier than
V100R003C00
1542455
363
MP.RxMeanSpeed
Earlier than
V100R003C00
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1542455349
MP.TxPackets
554
eNodeB
Performance Counter Reference
Description
This counter measures the number of packets successfully transmitted by the MP group within
a measurement period. An MP group corresponds to multiple E1/T1 ports.
Measurement Point
The number of packets successfully transmitted by the MP group is sampled per second. At the
end of a measurement period, the average of these sampling results is used as the value of the
counter.
Formula
None
Unit
packet
Related Features
Counter Name
Feature ID
Feature Name
MP.TxPackets
LBFD-003004
TDLBFD-003004
Counter Name
Description
1542455350
MP.TxBytes
Description
This counter measures the number of bytes in the packets that are successfully transmitted by
the MP group within a measurement period. This counter measures the total number of bytes in
the Address field, Control field, Protocol field, and Information field in a packet. It represents
the traffic volume and transmission capability of the MP group. The following picture shows
these fields.
Measurement Point
The number of bytes successfully transmitted by the MP group is sampled per second. At the
end of a measurement period, the sum of these sampling results is used as the value of the counter.
Issue 06 (2011-09-30)
555
eNodeB
Performance Counter Reference
Figure 3-22
Formula
None
Unit
byte
Related Features
Counter Name
Feature ID
Feature Name
MP.TxBytes
LBFD-003004
TDLBFD-003004
Counter Name
Description
1542455351
MP.TxDropPkts
Description
This counter measures the number of packets that are to be transmitted but discarded by the MP
group within a measurement period. It represents the traffic volume and transmission capability
of the MP group. Packets to be transmitted are discarded before MP links are activated.
Measurement Point
The number of packets that are to be transmitted but discarded by the MP group is sampled per
second. At the end of a measurement period, the sum of these sampling results is used as the
value of the counter.
Issue 06 (2011-09-30)
556
eNodeB
Performance Counter Reference
Formula
None
Unit
packet
Related Features
Counter Name
Feature ID
Feature Name
MP.TxDropPkts
LBFD-003004
TDLBFD-003004
Counter Name
Description
1542455352
MP.RxPackets
Description
This counter measures the number of packets successfully received by the MP group within a
measurement period. An MP group corresponds to multiple E1/T1 ports.
Measurement Point
The number of packets successfully received by the MP group is sampled per second. At the
end of a measurement period, the average of these sampling results is used as the value of the
counter.
Formula
None
Unit
packet
Issue 06 (2011-09-30)
557
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
MP.RxPackets
LBFD-003004
TDLBFD-003004
Counter Name
Description
1542455353
MP.RxBytes
Description
This counter measures the number of bytes in the packets that are successfully received by the
MP group within a measure period. This counter measures the total number of bytes in the
Address field, Control field, Protocol field, and Information field in a packet. It represents the
traffic volume and transmission capability of the MP group. The following picture shows these
fields.
Measurement Point
The number of bytes in the packets that are successfully received by the MP group is sampled
per second. At the end of a measurement period, the sum of these sampling results is used as the
value of the counter.
Figure 3-23
Formula
None
Issue 06 (2011-09-30)
558
eNodeB
Performance Counter Reference
Unit
byte
Related Features
Counter Name
Feature ID
Feature Name
MP.RxBytes
LBFD-003004
TDLBFD-003004
3.10.1.6 Number of Packets That Are Received But Discarded by the MP Group
Counter
Counter ID
Counter Name
Description
1542455354
MP.RxDropPkts
Description
This counter measures the number of packets that are received but discarded by the MP group
within a measurement period. Packets are discarded if they are out of order and lead to
reassembly failures. It represents the traffic volume and transmission capability of the MP group.
Measurement Point
The number of packets that are received but discarded by the MP group is sampled per second.
At the end of a measurement period, the sum of these sampling results is used as the value of
the counter.
Formula
None
Unit
packet
Issue 06 (2011-09-30)
559
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
MP.RxDropPkts
LBFD-003004
TDLBFD-003004
Counter Name
Description
1542455358
MP.TxMaxSpeed
Description
The counter measures the maximum transmit rate of the MLPPP group within a measurement
period. This counter represents the traffic on the MLPPP link.
Measurement Point
The number of bytes transmitted by the MLPPP group is sampled per second. At the end of a
measurement period, the maximum of these sampling results is used to calculate the maximum
transmit rate. The maximum transmit rate is calculated through the following formula.
Formula
Maximum transmit rate = Max (S1, S2, S3, ..., Sn), where Sn represents the transmit rate at
second n.
Unit
bit/s
Related Features
Counter Name
Feature ID
Feature Name
MP.TxMaxSpeed
LBFD-003004
TDLBFD-003004
Issue 06 (2011-09-30)
560
eNodeB
Performance Counter Reference
Counter Name
Description
1542455359
MP.TxMinSpeed
Description
The counter measures the minimum transmit rate of the MLPPP group within a measurement
period. This counter represents the traffic on the MLPPP link.
Measurement Point
The number of bytes transmitted by the MLPPP group is sampled per second. At the end of a
measurement period, the minimum of these sampling results is used to calculate the minimum
transmit rate. The minimum transmit rate is calculated through the following formula.
Formula
Minimum transmit rate = Min (S1, S2, S3, ..., Sn), where Sn represents the transmit rate at second
n.
Unit
bit/s
Related Features
Counter Name
Feature ID
Feature Name
MP.TxMinSpeed
LBFD-003004
TDLBFD-003004
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1542455360
MP.TxMeanSpeed
561
eNodeB
Performance Counter Reference
Description
The counter measures the average transmit rate of the MLPPP group within a measurement
period. This counter represents the traffic on the MLPPP link.
Measurement Point
The number of bytes transmitted by the MLPPP group is sampled per second. At the end of a
measurement period, the average of these sampling results is used to calculate the average
transmit rate. The average transmit rate is calculated through the following formula.
Formula
Average transmit rate = (S1 + S2 + S3 + ... + Sn)/n, where Sn represents the transmit rate at
second n.
Unit
bit/s
Related Features
Counter Name
Feature ID
Feature Name
MP.TxMeanSpeed
LBFD-003004
TDLBFD-003004
Counter Name
Description
1542455361
MP.RxMaxSpeed
Description
The counter measures the maximum receive rate of the MLPPP group within a measurement
period. This counter represents the traffic on the MLPPP link.
Measurement Point
The number of bytes received by the MLPPP group is sampled per second. At the end of a
measurement period, the maximum of these sampling results is used to calculate the maximum
receive rate. The maximum receive rate is calculated through the following formula.
Issue 06 (2011-09-30)
562
eNodeB
Performance Counter Reference
Formula
Maximum receive rate = Max (S1, S2, S3, ..., Sn), where Sn represents the receive rate at second
n.
Unit
bit/s
Related Features
Counter Name
Feature ID
Feature Name
MP.RxMaxSpeed
LOFD-003011
LBFD-003004
TDLOFD-003011
TDLBFD-003004
Counter Name
Description
1542455362
MP.RxMinSpeed
Description
The counter measures the minimum receive rate of the MLPPP group within a measurement
period. This counter represents the traffic on the MLPPP link.
Measurement Point
The number of bytes received by the MLPPP group is sampled per second. At the end of a
measurement period, the minimum of these sampling results is used to calculate the minimum
receive rate. The minimum receive rate is calculated through the following formula.
Formula
Minimum receive rate = Min (S1, S2, S3, ..., Sn), where Sn represents the receive rate at second
n.
Unit
bit/s
Issue 06 (2011-09-30)
563
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
MP.RxMinSpeed
LOFD-003011
LBFD-003004
TDLOFD-003011
TDLBFD-003004
Counter Name
Description
1542455363
MP.RxMeanSpeed
Description
The counter measures the average receive rate of the MLPPP group within a measurement period.
This counter represents the traffic on the MLPPP link.
Measurement Point
The number of bytes received by the MLPPP group is sampled per second. At the end of a
measurement period, the average of these sampling results is used to calculate the average receive
rate. The average receive rate is calculated through the following formula.
Formula
Average receive rate = (S1 + S2 + S3 + ... + Sn)/n, where Sn represents the receive rate at second
n.
Unit
bit/s
Issue 06 (2011-09-30)
564
eNodeB
Performance Counter Reference
Related Features
Counter Name
Feature ID
Feature Name
MP.RxMeanSpeed
LOFD-003011
LBFD-003004
TDLOFD-003011
TDLBFD-003004
Description
Issue 06 (2011-09-30)
565
eNodeB
Performance Counter Reference
Figure 3-24
Counter
The following table describes the counters contained in the "OM Channel Measurement (Omch)
(Transport.Omch)" measurement unit:
Issue 06 (2011-09-30)
Counte
r ID
Counter Name
Description
Original Release
1542455
826
OMCH.RxTotalPk
ts
Earlier than
V100R003C00
1542455
827
OMCH.RxInSeqPk
ts
Earlier than
V100R003C00
1542455
828
OMCH.RxWndPro
bePkts
Earlier than
V100R003C00
1542455
829
OMCH.RxWndUp
datePkts
Earlier than
V100R003C00
1542455
833
OMCH.RxDupPkts
Earlier than
V100R003C00
1542455
834
OMCH.RxPartDupPkts
Earlier than
V100R003C00
1542455
835
OMCH.RxOutOfO
rderPkts
Earlier than
V100R003C00
1542455
836
OMCH.RxAfterWndPkts
Earlier than
V100R003C00
566
eNodeB
Performance Counter Reference
Counte
r ID
Counter Name
Description
Original Release
1542455
837
OMCH.RxAfterCl
osePkts
Earlier than
V100R003C00
1542455
838
OMCH.RxAckPkts
Earlier than
V100R003C00
1542455
839
OMCH.RxDupAckPkts
Earlier than
V100R003C00
1542455
840
OMCH.RxTooMuchAckPkts
Earlier than
V100R003C00
1542455
841
OMCH.TxTotalPkt
s
Earlier than
V100R003C00
1542455
842
OMCH.TxUrgentPkts
Earlier than
V100R003C00
1542455
843
OMCH.TxCtrlPkts
Earlier than
V100R003C00
1542455
844
OMCH.TxWndPro
bePkts
Earlier than
V100R003C00
1542455
845
OMCH.TxWndUp
datePkts
Earlier than
V100R003C00
1542455
846
OMCH.TxDataPkt
s
Earlier than
V100R003C00
1542455
847
OMCH.TxDataRexntPkts
Number of Packets
Retransmitted on the OM
Channel
Earlier than
V100R003C00
1542455
848
OMCH.TxAckOnlyPkts
Earlier than
V100R003C00
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1542455826
OMCH.RxTotalPkts
567
eNodeB
Performance Counter Reference
Description
This counter measures the total number of TCP packets received on the OM channel within a
measurement period. It represents the traffic on the OM channel.
Measurement Point
The number of packets received on the OM channel is sampled per second. At the end of a
measurement period, the sum of these sampling results is used as the value of the counter.
Formula
None
Unit
packet
Related Features
None
Counter Name
Description
1542455827
OMCH.RxInSeqPkts
Description
This counter measures the number of in-order TCP packets received on the OM channel within
a measurement period. It represents the quality of the OM channel.
Measurement Point
The number of in-order packets received on the OM channel is sampled per second. At the end
of a measurement period, the sum of these sampling results is used as the value of the counter.
Formula
None
Unit
packet
Related Features
None
Issue 06 (2011-09-30)
568
eNodeB
Performance Counter Reference
Counter Name
Description
1542455828
OMCH.RxWndProbePkts
Description
This counter measures the total number of window probe packets received on the OM channel
within a measurement period. It represents the traffic on the OM channel. After the local end
informs the peer end that the receiving window size is zero, the peer end periodically sends
window probe packets to check the size of the receiving window at the local end.
Measurement Point
The number of window probe packets received on the OM channel is sampled per second. At
the end of a measurement period, the sum of these sampling results is used as the value of the
counter.
Formula
None
Unit
packet
Related Features
None
3.11.1.4 Number of the Window Size Update Packets Received on the OM Channel
Counter
Counter ID
Counter Name
Description
1542455829
OMCH.RxWndUpdatePkts
Description
This counter measures the number of the window size update packets received on the OM
channel within a measurement period. The peer end transmits such a packet when the peer end
receives a probe packet from the local end or when the window size at the peer end changes.
This counter represents the quality of the OM channel.
Issue 06 (2011-09-30)
569
eNodeB
Performance Counter Reference
Measurement Point
The number of the window size update packets received on the OM channel is sampled per
second. At the end of a measurement period, the sum of these sampling results is used as the
value of the counter.
Formula
None
Unit
packet
Related Features
None
Counter Name
Description
1542455833
OMCH.RxDupPkts
Description
This counter measures the number of fully duplicated ACKs received on the OM channel within
a measurement period. It represents the quality of the OM channel. Two packets are fully
duplicated if they have the same sequence number and the same data. This counter indicates the
channel quality and the receive capability of the transmitter.
Measurement Point
The number of fully duplicated packets received on the OM channel is sampled per second. At
the end of a measurement period, the sum of these sampling results is used as the value of the
counter.
Formula
None
Unit
packet
Related Features
None
Issue 06 (2011-09-30)
570
eNodeB
Performance Counter Reference
Counter Name
Description
1542455834
OMCH.RxPartDupPkts
Description
This counter measures the number of partially duplicated packets received on the OM channel
within a measurement period. It represents the quality of the OM channel. Two packets are
partially duplicated if they have the same data. This counter indicates the channel quality and
the receive capability of the transmitter.
Measurement Point
The number of partially duplicated packets received on the OM channel is sampled per second.
At the end of a measurement period, the sum of these sampling results is used as the value of
the counter.
Formula
None
Unit
packet
Related Features
None
Counter Name
Description
1542455835
OMCH.RxOutOfOrderPkts
Description
This counter measures the number of out-of-order packets received on the OM channel within
a measurement period. It represents the quality of the OM channel.
Issue 06 (2011-09-30)
571
eNodeB
Performance Counter Reference
Measurement Point
The number of out-of-order packets received on the OM channel is sampled per second. At the
end of a measurement period, the sum of these sampling results is used as the value of the counter.
Formula
None
Unit
packet
Related Features
None
Counter Name
Description
1542455836
OMCH.RxAfterWndPkts
Description
This counter measures the number of packets beyond the receive window of the OM channel
within the measurement period. A packet falls beyond the receive window of the OM channel
when its size is larger than the receive capacity of the receive window. This counter indicates
the quality of service of the OM channel.
Measurement Point
The number of packets beyond the receive window of the OM channel is sampled per second.
At the end of a measurement period, the sum of these sampling results is used as the value of
the counter.
Formula
None
Unit
packet
Related Features
None
Issue 06 (2011-09-30)
572
eNodeB
Performance Counter Reference
Counter Name
Description
1542455837
OMCH.RxAfterClosePkts
Description
This counter measures the number of packets with the FIN bit set to 1 that are received on the
OM channel within a measurement period. The FIN packet indicates the packet received on the
OM channel after the connection is released. Certain data is buffered during transmission, which
causes the receiver to receive some packets after the connection is released. This counter
represents the quality of the OM channel and the network.
Measurement Point
The number of packets received on the OM channel after the connection is released is sampled
per second. At the end of a measurement period, the sum of these sampling results is used as the
value of the counter.
Formula
None
Unit
packet
Related Features
None
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1542455838
OMCH.RxAckPkts
573
eNodeB
Performance Counter Reference
Description
This counter measures the number of acknowledge messages (ACKs) received on the OM
channel within a measurement period. An acknowledge message is a message with the ACK
flag being set. It represents the quality of the OM channel.
Measurement Point
The number of ACKs received on the OM channel is sampled per second. At the end of a
measurement period, the sum of these sampling results is used as the value of the counter.
Formula
None
Unit
packet
Related Features
None
Counter Name
Description
1542455839
OMCH.RxDupAckPkts
Description
This counter measures the number of duplicated ACKs received on the OM channel within a
measurement period. It represents the quality of the OM channel.
Measurement Point
The number of duplicated ACKs received on the OM channel is sampled per second. At the end
of a measurement period, the sum of these sampling results is used as the value of the counter.
Formula
None
Unit
packet
Issue 06 (2011-09-30)
574
eNodeB
Performance Counter Reference
Related Features
None
Counter Name
Description
1542455840
OMCH.RxTooMuchAckPkts
Description
This counter measures the number of received ACKs for the data that has not been transmitted
on the OM channel within a measurement period. This counter indicates the quality of the OM
channel.
Measurement Point
The number of received ACKs for the data that has not been transmitted on the OM channel is
sampled per second. At the end of a measurement period, the sum of these sampling results is
used as the value of the counter.
Formula
None
Unit
packet
Related Features
None
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1542455841
OMCH.TxTotalPkts
575
eNodeB
Performance Counter Reference
Description
This counter measures the total number of TCP packets transmitted on the OM channel within
a measurement period. The TCP packet includes the control packet, data packet, and keep-alive
packet. This counter represents the traffic on the OM channel.
Measurement Point
The number of packets transmitted on the OM channel is sampled per second. At the end of a
measurement period, the sum of these sampling results is used as the value of the counter.
Formula
None
Unit
packet
Related Features
None
Counter Name
Description
1542455842
OMCH.TxUrgentPkts
Description
This counter measures the number of urgent data packets transmitted on the OM channel within
a measurement period. It represents the traffic on the OM channel. An urgent data packet is a
packet with the URG bit set to 1.
Measurement Point
The number of urgent data packets transmitted on the OM channel is sampled per second. At
the end of a measurement period, the sum of these sampling results is used as the value of the
counter.
Formula
None
Unit
packet
Issue 06 (2011-09-30)
576
eNodeB
Performance Counter Reference
Related Features
None
Counter Name
Description
1542455843
OMCH.TxCtrlPkts
Description
This counter measures the number of control packets transmitted on the OM channel within a
measurement period. It represents the traffic on the OM channel. The control packet is used for
connection setup or connection release. It is a TCP packet with the SYN bit, FIN bit, and RST
bit all set and with no data.
Measurement Point
The number of control packets transmitted on the OM channel is sampled per second. At the
end of a measurement period, the sum of these sampling results is used as the value of the counter.
Formula
None
Unit
packet
Related Features
None
Counter Name
Description
1542455844
OMCH.TxWndProbePkts
Description
This counter measures the number of window probe packets transmitted on the OM channel
within a measurement period. It represents the traffic on the OM channel. If the local end receives
Issue 06 (2011-09-30)
577
eNodeB
Performance Counter Reference
an ACK from the peer end indicating that the receiving window size is zero, the local end will
send a one-byte TCP packet, that is, a window probe packet, to the peer end after waiting for a
period of time. Window probe packets transmitted on the OM channel are used to determine
whether the receiver can still receive packets, that is, whether the actual receiving window size
is zero. In general, a larger value of this counter indicates a larger extent that the receive capability
is stronger than the transmit capability.
Measurement Point
The number of window probe packets transmitted on the OM channel is sampled per second.
At the end of a measurement period, the sum of these sampling results is used as the value of
the counter.
Formula
None
Unit
packet
Related Features
None
Counter Name
Description
1542455845
OMCH.TxWndUpdatePkts
Description
This counter measures the number of the window size update packets transmitted on the OM
channel within a measurement period. Such a packet is transmitted as a response to the window
probe packet. It only includes the window size update information and has no data. This counter
represents the quality of the OM channel.
Measurement Point
The number of window size update packets transmitted on the OM channel is sampled per
second. At the end of a measurement period, the sum of these sampling results is used as the
value of the counter.
Formula
None
Issue 06 (2011-09-30)
578
eNodeB
Performance Counter Reference
Unit
packet
Related Features
None
Counter Name
Description
1542455846
OMCH.TxDataPkts
Description
This counter measures the number of data packets transmitted on the OM channel within a
measurement period. It represents the traffic on the OM channel.
Measurement Point
The number of data packets transmitted on the OM channel is sampled per second. At the end
of a measurement period, the sum of these sampling results is used as the value of the counter.
Formula
None
Unit
packet
Related Features
None
Issue 06 (2011-09-30)
Counter ID
Counter Name
Description
1542455847
OMCH.TxDataRexntPkts
579
eNodeB
Performance Counter Reference
Description
This counter measures the number of packets retransmitted on the OM channel within a
measurement period. The transmitter retransmits a packet if no ACK message for the packet is
received within a specified time. This counter represents the quality of the OM channel.
Measurement Point
The number of packets retransmitted on the OM channel is sampled per second. At the end of
a measurement period, the sum of these sampling results is used as the value of the counter.
Formula
None
Unit
packet
Related Features
None
Counter Name
Description
1542455848
OMCH.TxAckOnlyPkts
Description
This counter measures the number of ACKs, that is, the packets only include ACK information
and have no data, transmitted on the OM channel within a measurement period. This counter
represents the quality of the OM channel.
Measurement Point
The number of ACKs transmitted on the OM channel is sampled per second. At the end of a
measurement period, the sum of these sampling results is used as the value of the counter.
Formula
None
Unit
packet
Issue 06 (2011-09-30)
580
eNodeB
Performance Counter Reference
Related Features
None
Issue 06 (2011-09-30)
581