Aesthetic Composite
Restoration
2
PRIBADI SANTOSA
DEPARTEMEN KONSERVASI GIGI
FKG-UGM
Cervical
transitional
line angle
Distal
transitional
line angle
Mesial
transitional
line angle
Incisal
transitional
line angle
Grey Effect
Yellow Effect
Aesthetic complex
Hasil koreksi
Fungsi restorasi
Matriks
Menciptakan area kontak Serta embrasure
Klas II
SuperMat
Matrix driver
Plastic wedge
Matrix band
SuperMat
Matrix
clamp
SuperMat
SuperMat
Put in place.
Matrix Benefits:
Avoid saliva and blood contamination in the cavity.
Help in reshaping the anatomy of the tooth.
Good line angles
Reduction of the composite material used in the restoration (minimal excess)
Wedge Benefits:
Stabilize the position of the matrix which tends to move during the filling of the cavity
Compensates the matrix thickness in order to separate the adjacent tooth and guarantee
a good contact point
Warranty for a good cervical sealing
Cervical margin adaptation to avoid the excess of material and fluid penetration.
Gingival compression to avoid blooding.
BENEFITS:
Time saving in relation to the finishing and polishing procedures
No polymerization inhibition layer in the contact area with the matrix
Remove
Palodent
V3 Ring matrix
Tofflemire Bands
Standard
Standard
Greater Curve
Standard
Greater Curve
Greater Curve
Diastema Closure
Mesial of #8 is shaped.
Floss is used to judge that
the contact line is parallel to
the long axis of the face.
Papilla squeezed
to a pointed shape
Papilla squeezed
to a pointed shape
Thank You
SonicFill
Sonic Activated, Bulk Fill
Composite
SonicFills technologi
SonicFill's composite incorporates a highly-filled
proprietary resin with special modifiers that react
to sonic energy.
As sonic energy is applied through the
handpiece, the modifier causes the viscosity to
drop (up to 87 %), increasing the flowability of the
composite enabling quick placement and
adaptation to the cavity walls.
When the sonic energy is stopped, the composite
returns to a more viscous, non-slumping state
that is perfect for carving and contouring.
Depth of Cure 5 mm
Increased levels of photoinitiators in the
composite material allow a full 5mm depth
of cure in 20 seconds with as little as a
500mW/ cm light source.
TERIMA KASIH