JULY 2014/ELE290
The circuit shown in Figure Q1 is operating in the DC voltage source, VT = 30 V. Determine:
i) The current, I1 and I2 flow in the circuit.
ii) The power absorbed by resistor 6 .
I1
10
2
30V
Figure Q1
FEB 2010/ELE290
I2
6
AUGUST 2009/ELE290
JULY 2011/ELE290
AUGUST 2010/ELE290
JAN 2015/ELE290
JAN 2015/ELE290
Determine the value of capacitor needed to be connected in parallel with load in order to
improve the power factor of the load from 0.8 lagging power factor at 1500W to 0.95
lagging power factor. The supply voltage is given as 240-Vrms, 50Hz. Draw the power
triangle showing conditions of before and after power factor correction is done.
JULY 2011/ELE290
FEB 2010/ELE290
AUGUST 2009/ELE290
JAN 2013/ELE290