pdf
Dec.25,2015
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
EU RoHS Compliant
F**2&#.0-"3!21',2&'1!2*-%!-+.*7
5'2& -@
F -'12&# 30-.#,'0#!2'4#
|z{{GG -,2&##120'!2'-,-$2&#
1#-$#02',80"-313 12,!#1',
*#!20'!*," *#!20-,'! /3'.+#,2@
FFor+-0#"#2'*1A.*#1#0#$#r2o-ur
5# 1'2#'Mur21A..roc&$o0 -'
H&22.BGG555@+302@!-+G#,#3G13..-02G!-+.*',!#G0-&1J@
P51E.pdf
Dec.25,2015
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Contents
Selection Guide
Part Numbering
p6
p6
p7
p7
p7
p8
p10
p12
p14
p15
p15
p16
p16
p16
p16
p17
p18
p20
p21
p21
p21
p21
p22
p23
p27
p34
p34
p35
p35
p36
p37
p38
p40
p41
p41
p41
p41
p41
p42
p43
p45
p46
p46
p46
p47
p47
p49
p50
p51
p53
8 Crystal Filters
p2
p3
p28
p28
p28
p28
p29
p30
p31
p33
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Selection Guides
Applications
Industrial
Audio Visual/Communications
Filters
Discriminators
Crystal Filters
SFECF
TPSKA
CDSCB
XDCAF
3.453.11.4mm
10.000-11.000MHz
8.53.82.0mm
4.500-6.500MHz
4.52.01.0mm
10.520-10.800MHz
7.05.01.1mm
2 pole
SFECV/SFECK
XDCAG
6.92.91.7mm
10.700-15.000MHz
7.05.01.1mm
4 pole
SFSCE
XDCAH
4.53.81.0mm
10.700-11.000MHz
7.05.01.1mm
4 pole
SFSKA
8.53.82.0mm
4.500-6.500MHz
SFSKB
5.23.81.5mm
2.300-5.700MHz
Traps
P51E.pdf
Dec.25,2015
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
o Part Numbering
CERAFILr for FM
(Part Number)
SF
CF 10M7 F
5 6
A0 -R0
7
8
6Center Frequency/Tolerance
1Product ID
Product ID
SF
Ceramic Filters
2Oscillation/Number of Elements
Code
Oscillation/Number of Elements
3Structure/Size
Code
Center Frequency
Tolerance
30kHz
7Series
Code
Series
A0
8Packaging
Code
Packaging
-B0
Bulk
Code
Structure/Size
-R0
Cp
Chip Type
-R1
Radial taping is applied to lead type and embossed taping to chip type.
With non-standard products, two-digit alphanumerics indicating
"Individual Specication" are added between "7Series" and
"8Packaging."
53dB Bandwidth
Code
3dB Bandwidth
450kHz min
350kHz min
330kHz
280kHz
230kHz
180kHz
150kHz
110kHz
80kHz
50kHz
35kHz
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
CERAFILr
(Part Number)
SF
KA 4M50 CF
00 -R1
1Product ID
Product ID
Code
SF
Ceramic Filters
2Oscillation/Numbers of Element
Code
Oscillation/Numbers of Element
BF
CF
DF
EF
Structure/Size
Kp
Chip Type
Code
00
Standard Type
7Packaging
Packaging
Code
4Nominal Center Frequency
-B0
Bulk
-R1
Ceramic Traps
(Part Number)
TP
KA 4M00 B
00 -R0
5 6
1Product ID
Product ID
TP
Ceramic Traps
Code
2Function
Code
Function
Single Traps
00
Standard Type
3Structure/Size
Code
Structure/Size
Kp
Chip Type
7Packaging
Code
Packaging
-B0
Bulk
-R1
P51E.pdf
Dec.25,2015
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Discriminators for FM
(Part Number)
CD
CB 10M7 G
A 001 -R0
5 6
8
6Center Frequency/Tolerance
1Product ID
Product ID
CD
Discriminators
2Oscillation
Code
Center Frequency
Tolerance
30kHz
Code
Oscillation
3Structure/Size
Code
Structure/Size
Cp
Chip Type
Code
IC
001
8Packaging
Packaging
Code
4Nominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).
Decimal point is expressed by capital letter "M" in case of MHz.
-B0
Bulk
-R0
-R1
Radial taping is applied to lead type and embossed taping to chip type.
With non-standard products, an alphanumerics indicating "Individual
Specication" is added between "7IC" and "8Packaging."
5Series
Code
Series
Crystal Filter
(Part Number)
XD
2 3 4
F 21M400 R
5
A A00 P0
6 7
1Product ID
9
7Number of Pole
Product ID
XD
Crystal Filter
Monolithic SMD
Code
Number of Pole
2 (1 Element)
4 (1 Element)
4 (2 Elements)
8Individual Specication
Code
3Size
Code
Size
7050
4Structure
***
Code
Packaging
P*/L*
6Bandwidth
Code
Bandwidth (3dB)
6.800 to 8.199kHz
10.000 to 11.999kHz
12.000 to 14.999kHz
15.000 to 17.999kHz
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
RoHS
3.10.2
3.450.2
Input electrode
marker
(1.28)(1.28)
0.3 min. 0.3 min.
Features
1. The filters are mountable by automatic placers.
2. They are slim, at only 1.4mm max. thickness, and have a
small mounting area (3.45x3.1mm) enabling flexible PCB
design.
3. Various bandwidths are available. Select a suitable type in
accordance with the desired characteristics.
4. Operating Temperature Range:
-20 to +80C (Standard Type)
-40 to +85C (High-reliability Type)
Storage Temperature Range:
-40 to +85C (Standard Type)
-55 to +85C (High-reliability Type)
(1)
(6)
(2) (3)
(5) (4)
(1.28)(1.28)
0 to 0.35
0.750.3
0.850.3 0.850.3
0 to 0.35
(in mm)
Standard Type
Part Number
3dB
Bandwidth
(kHz)
SFECF10M7HA00-R0
10.700
30kHz
180 40kHz
470 max.
SFECF10M7HF00-R0
10.700
fn25 min.
510 max.
SFECF10M7GA00-R0
10.700
30kHz
230 50kHz
510 max.
SFECF10M7GF00-R0
10.700
fn45 min.
560 max.
SFECF10M7FA00-R0
10.700
30kHz
280 50kHz
590 max.
SFECF10M7FF00-R0
10.700
fn65 min.
620 max.
SFECF10M7EA00-R0
10.700
30kHz
330 50kHz
SFECF10M7DA0001-R0
10.700
30kHz
10.700
SFECF10M7DF00-R0
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
1.0 max.
30 min.
25 min.
[within 9MHz to fn] [within fn to 12MHz]
330
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
1.0 max.
30 min.
25 min.
[within 9MHz to fn] [within fn to 12MHz]
330
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
1.0 max.
30 min.
25 min.
[within 9MHz to fn] [within fn to 12MHz]
330
700 max.
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
420 min.
950 max.
35 min.
25 min.
[within 9MHz to fo] [within fo to 12MHz]
330
fn150 min.
990 max.
20 min.
20 min.
[within 9MHz to fn] [within fn to 12MHz]
330
8.0max.
[at fn]
7.0max.
[at fn]
6.0max.
[at fn]
3.0 max.
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
High-reliability Type
Center Nominal Center
3dB
Frequency Frequency (fn) Bandwidth
(fo) (MHz)
(MHz)
(kHz)
Part Number
Ripple
(dB)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
SFECF10M7HA00S0-R0
10.700
30kHz
180 40kHz
470 max.
4.02.0dB
1.0 max.
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFECF10M7HF00S0-R0
10.700
fn25 min.
510 max.
8.0max.
[at fn]
1.0 max.
30 min.
25 min.
[within 9MHz to fn] [within fn to 12MHz]
330
SFECF10M7GA00S0-R0
10.700
30kHz
230 50kHz
510 max.
3.52.0dB
1.0 max.
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFECF10M7GF00S0-R0
10.700
fn45 min.
560 max.
8.0max.
[at fn]
1.0 max.
30 min.
25 min.
[within 9MHz to fn] [within fn to 12MHz]
330
SFECF10M7FA00S0-R0
10.700
30kHz
280 50kHz
590 max.
3.02.0dB
1.0 max.
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFECF10M7FF00S0-R0
10.700
fn65 min.
630 max.
7.0max.
[at fn]
1.0 max.
30 min.
25 min.
[within 9MHz to fn] [within fn to 12MHz]
330
SFECF10M7EA00S0-R0
10.700
30kHz
330 50kHz
700 max.
3.02.0dB
1.0 max.
30 min.
30 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFECF10M7DF00S0-R0
10.700
fn145 min.
990 max.
6.0max.
[at fn]
3.0 max.
20 min.
20 min.
[within 9MHz to fn] [within fn to 12MHz]
330
30kHz Step
25kHz Step
10.700MHz30kHz
10.700MHz25kHz
Test Circuit
0.1
(2)
0.1
(3)
0.1
0.8 0.6 0.8 0.6 0.8
0.1
0.3
(1)
1.05
0.1
(4)
R1
(1)
1.40
(5)
0.3
(6)
(4)
(5)
(6)
Rg
E1
R2
C2
E2
S.S.G.
RF
Voltmeter
1.05
0.3
0.1
(3)
(2)
(1): Input
(2)(5): Ground
(3)(4): No connection
(6): Output
(in mm)
(1): Input
(2)(5): Ground
(3)(4): No connection
(6): Output
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
7.0
6.0
6.0
5.0
5.0
4.0
4.0
3.0
3.0
2.0
2.0
1.0
1.0
10.700
Frequency (MHz)
10.900
7
10.300
0.0
11.100
0.0
11.100
SFECF10M7EA00-R0
7.0
6.0
6.0
5.0
5.0
4.0
4.0
3.0
3.0
2.0
2.0
1.0
1.0
10.500
10.700
Frequency (MHz)
10.900
Attenuation (dB)
0.0
11.100
7
10.300
SFECF10M7DA0001-R0
10.500
10.700
Frequency (MHz)
10.900
0.0
11.100
SFECF10M7DF00-R0
7.0
7.0
6.0
6.0
5.0
5.0
4.0
4.0
3.0
3.0
2.0
2.0
1.0
1.0
7
10.300
10.500
10.700
Frequency (MHz)
10.900
0.0
11.100
Attenuation (dB)
Attenuation (dB)
10.900
7.0
7
10.300
10.700
Frequency (MHz)
Attenuation (dB)
SFECF10M7FA00-R0/SFECF10M7FF00-R0
10.500
10.500
7
10.300
10.500
10.700
Frequency (MHz)
10.900
0.0
11.100
7
10.300
Attenuation (dB)
7.0
Attenuation (dB)
SFECF10M7GA00-R0/SFECF10M7GF00-R0
SFECF10M7HA00-R0/SFECF10M7HF00-R0
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
6.0
6.0
5.0
5.0
4.0
4.0
3.0
3.0
2.0
2.0
1.0
1.0
10.500
10.700
Frequency (MHz)
10.900
7
10.300
0.0
11.100
10.700
Frequency (MHz)
10.900
0.0
11.100
SFECF10M7EA00S0-R0
7.0
7.0
6.0
6.0
5.0
5.0
4.0
4.0
3.0
3.0
2.0
2.0
1.0
1.0
7
10.300
10.500
10.700
Frequency (MHz)
10.900
0.0
11.100
Attenuation (dB)
Attenuation (dB)
SFECF10M7FA00S0-R0/SFECF10M7FF00S0-R0
10.500
7
10.300
10.500
10.700
Frequency (MHz)
10.900
7
10.300
1
Group Delay Time ( sec.)
Attenuation (dB)
7.0
Attenuation (dB)
SFECF10M7HA00S0-R0/SFECF10M7HF00S0-R0
0
0.0
11.100
7.0
6.0
5.0
4.0
3.0
2.0
1.0
7
10.300
10.500
10.700
Frequency (MHz)
10.900
Attenuation (dB)
SFECF10M7DF00S0-R0
0
0.0
11.100
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P51E.pdf
Dec.25,2015
SFECF10M7GA00-R0/SFECF10M7GF00-R0
10
10
20
20
Attenuation (dB)
Attenuation (dB)
30
40
30
40
50
50
60
60
70
8.700
9.700
10.700
Frequency (MHz)
11.700
70
8.700
12.700
10
10
20
20
30
40
60
60
10.700
Frequency (MHz)
11.700
12.700
SFECF10M7DA0001-R0/SFECF10M7DF00-R0
0
Attenuation (dB)
10
20
30
40
50
60
70
8.700
10
9.700
10.700
Frequency (MHz)
11.700
12.700
11.700
12.700
40
50
9.700
11.700
30
50
70
8.700
10.700
Frequency (MHz)
SFECF10M7EA00-R0
Attenuation (dB)
Attenuation (dB)
SFECF10M7FA00-R0/SFECF10M7FF00-R0
9.700
12.700
70
8.700
9.700
10.700
Frequency (MHz)
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P51E.pdf
Dec.25,2015
10
10
20
20
Attenuation (dB)
Attenuation (dB)
SFECF10M7HA00S0-R0/SFECF10M7HF00S0-R0
0
30
40
30
40
50
50
60
60
70
8.700
9.700
10.700
Frequency (MHz)
11.700
70
8.700
12.700
10
10
20
20
30
40
11.700
12.700
11.700
12.700
40
50
60
60
10.700
Frequency (MHz)
10.700
Frequency (MHz)
30
50
9.700
9.700
SFECF10M7EA00S0-R0
0
Attenuation (dB)
Attenuation (dB)
SFECF10M7FA00S0-R0/SFECF10M7FF00S0-R0
0
70
8.700
11.700
12.700
11.700
12.700
70
8.700
9.700
10.700
Frequency (MHz)
SFECF10M7DF00S0-R0
0
Attenuation (dB)
10
20
30
40
50
60
70
8.700
9.700
10.700
Frequency (MHz)
11
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Notice
Temperature (C)
Peak
(260C max.)
260
230
Pre-heating
(150-180C)
100
Heating
(230C)
Gradual
Cooling
30 sec.
min.
60-120 sec.
40 sec.
max.
120 sec.
min.
[Component Direction]
Place the
component
lateral to the
direction in
which stress
acts.
Slit
Susceptibility to
stress is in the order
of: A>C>B
12
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P51E.pdf
Dec.25,2015
Notice
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
e Rating e
The component may be damaged if excessive mechanical
stress is applied.
e Handling e
1. Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specication.
2. The components, packed in a moisture proof bag (dry
pack), are sensitive to moisture. The following treatment
is required before applying reow soldering, to avoid
reliability degradation caused by thermal stress. When
unpacked, store the component in an atmosphere of
reow 30C and below 60%R.H., and solder within 1
week.
13
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging
Dimensions of Reel
Trailer
160 to 190
Leader
Cover lm
Empty
Empty
240 to 280
Components
400 to 560
180+0
-1.5
60+1.0
-0
13.00.5
2.00.5
17.01.0
13.0+1.0
-0
(in mm)
(3)
10 max.
12.00.2
5.50.05
1.840.1
Cover lm
3.35 +0.1
-0.05
(0.05)
4.00.1
Peeling strength
(0.1 to 0.7N)
0.30.05
4.10.1
Chip lter
4.10.1
4.00.1
1.550.05 2.00.05
3 max.
1.750.1
14
( ): Reference
(in mm)
P51E.pdf
Dec.25,2015
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
RoHS
2.90.3
1.20.5
1.20.5
(2)
(1)
1.50.2
1.50.2
*
*
(3)
Features
1.20.3
: Marking
1.00.5
1.00.5
1.00.5
(1) : Input
(2) : Ground
(3) : Output
(in mm)
Applications
1. Small, thin radios
2. Automotive radios
3. Headphone stereos
Standard Type
Part Number
Center
3dB
Attenuation Insertion Loss
Frequency Bandwidth
(kHz)
(dB)
(fo) (MHz)
(kHz)
SFECV15M0EQ0001-R0
15.000
50kHz
SFECV10M7KA00-R0
SFECV10M7JA00-R0
Spurious
Attenuation
(1) (dB)
Ripple
(dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
7.0max.
1.0 max.
30 min.
30 min.
[within 14MHz to fo] [within fo to 16MHz]
330
10.700
110 30kHz 320 max.
30kHz
6.02.0dB
1.0 max.
35 min.
35 min.
[within 9MHz to fo] [within fo to 12MHz]
330
10.700
150 40kHz 380 max.
30kHz
5.52.0dB
1.0 max.
35 min.
35 min.
[within 9MHz to fo] [within fo to 12MHz]
330
300 min.
750 max.
High-reliability Type
3dB
Attenuation Insertion Loss
Bandwidth
(kHz)
(dB)
(kHz)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
Part Number
Center
Frequency
(fo) (MHz)
SFECK10M7KA00S0-R0
10.700
30kHz
6.02.0dB
1.0 max.
35 min.
35 min.
[within 9MHz to fo] [within fo to 12MHz]
330
SFECK10M7JA00S0-R0
10.700
30kHz
5.52.0dB
1.0 max.
35 min.
35 min.
[within 9MHz to fo] [within fo to 12MHz]
330
Ripple
(dB)
15
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
30kHz Step
25kHz Step
10.700MHz30kHz
10.700MHz25kHz
Test Circuit
1.2
1.2
R1
(2)
Rg
E1
4.0
(3)
(1)
R2
C2
E2
S.S.G.
=-10dBm
1.65
1.65
2.85
2.85
RF
Voltmeter
(1): Input
(2): Ground
(3): Output
Land
(in mm)
8.0
6.0
4.0
2.0
10
14.700
14.800
15.200
0.0
15.300
7.5
7.0
6.5
6.0
5.5
5.0
7
10.300
16
10.500
10.700
Frequency (MHz)
10.900
4.5
11.100
Attenuation (dB)
8.0
7.0
6.5
6.0
5.5
5.0
4.5
4.0
7
10.300
SFECV10M7JA00-R0
0
10.500
10.700
Frequency (MHz)
10.900
3.5
11.100
Attenuation (dB)
SFECV10M7KA00-R0
10.0
Attenuation (dB)
SFECV15M0EQ0001-R0
0
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
6.5
7.5
6.0
7.0
5.5
6.5
5.0
6.0
4.5
5.5
4.0
5.0
7
10.300
10.500
10.700
Frequency (MHz)
10.900
Attenuation (dB)
3.5
11.100
7
10.300
10.500
10.700
Frequency (MHz)
10.900
SFECK10M7JA00S0-R0
7.0
Attenuation (dB)
SFECK10M7KA00S0-R0
0
4.5
11.100
SFECV10M7KA00-R0
10
10
Attenuation (dB)
Attenuation (dB)
20
30
40
50
30
40
50
60
60
70
80
13.000
20
14.000
15.000
Frequency (MHz)
16.000
17.000
11.700
12.700
70
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
11.700
12.700
SFECV10M7JA00-R0
0
Attenuation (dB)
10
20
30
40
50
60
70
8.700
9.700
10.700
Frequency (MHz)
10
10
20
20
Attenuation (dB)
Attenuation (dB)
SFECK10M7KA00S0-R0
30
40
30
40
50
50
60
60
70
8.700
9.700
10.700
Frequency (MHz)
11.700
12.700
70
8.700
9.700
10.700
Frequency (MHz)
17
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Notice
Ceramic Filters (CERAFILr) Chip Type SFECV/SFECK Series
Temperature (C)
Peak
(240C max.)
240
230
Pre-heating
(150-180C)
100
Heating
(230C)
Gradual
Cooling
30 sec.
min.
60-120 sec.
30 sec.
max.
120 sec.
min.
[Component Direction]
Put the
component
lateral to the
direction in
which stress
acts.
Slit
Susceptibility to
stress is in the order
of: A>C>B
18
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P51E.pdf
Dec.25,2015
Notice
Continued from the preceding page.
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
e Rating e
The component may be damaged if excessive mechanical
stress is applied.
e Handling e
Accurate test circuit values are required to measure
electrical characteristics.
Miscorrelation may be caused if there is any deviation,
especially stray capacitance, from the test circuit in the
specication.
19
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging
Minimum Quantity/Dimensions of Reel
Embossed Tape 180mm
2,000
(pcs.)
Dimensions of Reel
Trailer
160-190
Leader
Cover lm
Empty
240-280
400-560
Empty Components
180 +0
1.5
60 +1.0
0
13.00.5
2.00.5
+1.0
13.0 0
17.01.0
(in mm)
**
**
3.00.1
&'.q*2#0
(3)
5.50.05
**
12.00.2
**
1.90.1
**
7.30.01
+0.1
4.00.1
4.00.1
1.7 0.05
2.00.05
0.30.05
+0.1
1.5 0.0
1.750.1
'+#,1'-,1-$00'#0.#
1#0"'0#!2'-,-$$##"
F02,3+ #0+0)#"1'"#'1*571$!',%3.@
20
) : Reference
(in mm)
P51E.pdf
Dec.25,2015
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
RoHS
(3.5)
*
(4.0)
(4-R0.3)
(0.3)
(1.8)
(4)
(3)
(1)
(2)
(2.25)
0.6 1.1
(3)
(4)
Features
0.4
(2)
3.8
(1)
(1): Input
(2): Output
(3): No Connection
(4): Ground
* : EIAJ Monthly Code
Tolerance unless
otherwise specied: 0.1
( ): Reference
0.15
(in mm)
0.3
Applications
1. SS digital communication system
2. Digital wireless audio
3. PHS Evolution system
4. RFID Reader Writer
5. RKE
Nominal Center
3dB
Frequency (fn) Bandwidth
(MHz)
(kHz)
Part Number
Stop
Bandwidth
(MHz)
Insertion Loss
(dB)
Spurious
Response
(dB)
Ripple
(dB)
GDT Deviation
(s)
Input/Output
Impedance
(ohm)
SFSCE10M7WF03-R0
10.700
fn500.0
min.
470
SFSCE10M7WF04-R0
10.700
fn400.0
min.
470
SFSCE10M7WF05-R0
10.700
fn325.0
min.
470
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in packaging page in this catalog.
(4) (3)
0.1
(4)
R1
0.1
(3)
Test Circuit
(2)
(1)
0.5
(1) (2)
(1): Input
(2): Output
(3): No Connection
(4): Ground
(in mm)
Indicates solder resist land pattern.
0.5
Rg
R2
S.S.G.
C2
RF
Voltmeter
(1): Input
(2): Output
(3): No Connection
(4): Ground
R1+Rg=R2=Input/Output Impedance, Rg=50
C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)
E1: S.S.G. Output Voltage
21
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Frequency Characteristics
1.6
1.2
0.8
0.4
22
9.900
11.500
0.0
11.900
20
Attenuation (dB)
10
9.500
SFSCE10M7WF03-R0
2.0
Attenuation (dB)
SFSCE10M7WF03-R0
0
40
60
80
6.700
8.700
10.700
12.700
Frequency (MHz)
14.700
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Notice
SFSCE10M7WF03-R0 Notice
e Soldering and Mounting e
1. Standard Reow Soldering Conditions
(1) Reow
Filter is soldered twice within the following temperature
conditions.
Peak
(240C max.)
Temperature (C)
240
230
Heating
(230C)
Pre-heating
100
(150-180C)
30 sec.
min.
Gradual
Cooling
60-120 sec.
30 sec.
max.
120 sec.
min.
Perforation
Susceptibility to
stress is in the order
of: A>C>B
Slit
[Component Direction]
Place the component laterally to the
direction in which
stress acts.
23
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P51E.pdf
Dec.25,2015
Notice
Continued from the preceding page.
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
e Rating e
The component may be damaged if excessive mechanical
stress is applied.
e Handling e
Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specication.
24
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Notice
SFSCE10M7WF04/05-R0 Notice
e Soldering and Mounting e
1. Standard Reow Soldering Conditions
(1) Reow
Filter is soldered twice within the following temperature
conditions.
Peak
(260C max.)
Temperature (C)
260
230
Heating
(230C)
Pre-heating
100
(150-180C)
30 sec.
min.
Gradual
Cooling
60-120 sec.
40 sec.
max.
120 sec.
min.
Perforation
Susceptibility to
stress is in the order
of: A>C>B
Slit
[Component Direction]
Place the component laterally to the
direction in which
stress acts.
25
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P51E.pdf
Dec.25,2015
Notice
Continued from the preceding page.
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
e Rating e
The component may be damaged if excessive mechanical
stress is applied.
e Handling e
Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specication.
26
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P51E.pdf
Dec.25,2015
Packaging
Minimum Quantity/Dimensions of Reel
Embossed Tape 180mm
1,500
(pcs.)
Dimensions of Reel
Trailer
160 to 190
Empty
Leader
Cover lm
Components
Empty
240 to 280
13.00.5
180 +0
-1.5
400 to 560
2.00.5
17.01.0
13.0 +1.0
-0
(in mm)
~@zz@{
z@}z@z
{@z@z
@zz@{ }+6@
|@zz@z
{|@zz@|
@z@z
{@z@{
{@{z@{
@zz@{
##*',%120#,%2&
z@{2-z@
-4#0q*+ ~@}z@{ (3)
{z+6@
z@z
z@}z@z
{@z@z
1#0"'0#!2'-,-$$##"
F023+ #0+0)#"1'"#'1*571$!',%3.@
HJB#$#0#,!#
(in mm)
27
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
RoHS
7.90.2
3.00.1
1.80.2
0.50.1
8.50.2
Features
0.60.2
3.80.2
1.00.1
1.30.2
0.30.1
(1) : Input
(2) : Ground
(3) : Output
1.30.2
(1)
(2)
(3)
(in mm)
2.50.2 2.50.2
Part Number
Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
20dB
Bandwidth
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation(1)
(dB)
Spurious
Attenuation(2)
(dB)
Input/Output
Impedance
(ohm)
SFSKA4M50CF00-R3
4.500
fn60 min.
600 max.
6.0 max.
20 min.
[within 0 to fn]
15 min.
[within fn to 7.0MHz]
1000
SFSKA5M50CF00-R3
5.500
fn60 min.
600 max.
6.0 max.
25 min.
[within 0 to fn]
15 min.
[within fn to 7.0MHz]
600
SFSKA6M00CF00-R3
6.000
fn60 min.
600 max.
6.0 max.
25 min.
[within 0 to fn]
15 min.
[within fn to 7.5MHz]
470
SFSKA6M50CF00-R3
6.500
fn60 min.
600 max.
6.0 max.
25 min.
[within 0 to fn]
15 min.
[within fn to 8.5MHz]
470
Test Circuit
SFSKA4M50CF00-R3
(1) (2) (3)
1.0
1.5
1.0
1.5
R1
1.0
Rg
4.8
E1
(in mm)
R2
C2
E2
RF
Voltmeter
S.S.G.
(1): Input
(2): Ground
(3): Output
R1+Rg=R2=1000 5%, Rg=50
C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)
E1: S.S.G. Output voltage
28
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Test Circuit
SFSKA5M50CF00-R3
SFSKA6M00CF00-R3
R1
Rg
Rg
R2
E1
C2
E2
RF
Voltmeter
E1
R2
C2 E2
RF
Voltmeter
S.S.G.
S.S.G.
(1): Input
(2): Ground
(3): Output
(1): Input
(2): Ground
(3): Output
SFSKA6M50CF00-R3
(1) (2) (3)
R1
Rg
E1
R2
C2 E2
RF
Voltmeter
S.S.G.
(1): Input
(2): Ground
(3): Output
Frequency Characteristics
SFSKA5M50CF00-R3
0
10
10
20
20
Attenuation (dB)
Attenuation (dB)
SFSKA4M50CF00-R3
0
30
40
30
40
50
50
60
60
70
3.5
3.7
3.9
4.1
4.3
4.5
4.7
Frequency (MHz)
4.9
5.1
5.3
70
4.5
5.5
4.7
4.9
10
10
20
20
30
40
60
60
5.4
5.6
5.8
6.0
6.2
Frequency (MHz)
6.1
6.3
6.5
6.9
7.1
7.3
7.5
40
50
5.2
5.9
30
50
70
5.0
5.3
5.5
5.7
Frequency (MHz)
SFSKA6M50CF00-R3
Attenuation (dB)
Attenuation (dB)
SFSKA6M00CF00-R3
5.1
6.4
6.6
6.8
7.0
70
5.5
5.7
5.9
6.1
6.3
6.5
6.7
Frequency (MHz)
29
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
10
10
20
20
Attenuation (dB)
Attenuation (dB)
SFSKA4M50CF00-R3
0
30
40
30
40
50
50
60
60
70
0.0
2.0
4.0
6.0
Frequency (MHz)
8.0
70
10.0
2.0
10
10
20
20
30
40
60
60
30
2.0
4.0
6.0
Frequency (MHz)
8.0
10.0
40
50
10.0
30
50
70
8.0
SFSKA6M50CF00-R3
Attenuation (dB)
Attenuation (dB)
SFSKA6M00CF00-R3
4.0
6.0
Frequency (MHz)
8.0
10.0
70
2.0
4.0
6.0
Frequency (MHz)
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Notice
Ceramic Filters (CERAFILr) Chip Type SFSKA Series
1. Standard Reow Soldering Conditions
(1) Reow
Filter is soldered twice within the following temperature
conditions.
Temperature (C)
Peak
(260C max.)
260
230
Pre-heating
(150-180C)
100
Heating
(230C)
Gradual
Cooling
30 sec.
min.
60-120 sec.
40 sec.
max.
120 sec.
min.
[Component Direction]
Perforation
Susceptibility to
stress is in the order
of: A>C>B
Slit
Put the
component
lateral to the
direction in
which stress
acts.
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
Continued on the following page.
31
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P51E.pdf
Dec.25,2015
Notice
Continued from the preceding page.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
e Rating e
The component may be damaged if excessive mechanical
stress is applied.
e Handling e
Accurate test circuit values are required to measure
electrical characteristics.
Miscorrelation may be caused if there is any deviation,
especially stray capacitance, from the test circuit in the
specication.
32
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P51E.pdf
Dec.25,2015
Packaging
Minimum Quantity/Dimensions of Reel
Embossed Tape 330mm
3,000
(pcs.)
Dimensions of Reel
Leader
Cover lm
Trailer
160 to 190
Empty Components
Empty
240 to 280 min.
2.20.5
801
3302
400 to 560
13.00.2
17.50.5
21.51.0
(in mm)
4.30.1
Chip lter
(3)
+0.1
8.00.1
10 max.
2.10.05
+0.1
Peeling strength 1.50.0
(0.1 to 0.7N)
Cover lm
0.30.05
16.00.2
9.00.1
7.50.1
2.00.1 4.00.1
2.30.1
+0.1
1.50.0
1.750.1
) : Reference
(in mm)
33
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
RoHS
(3.5)
*
(2)
(3)
1.350.15
(4.93)
4-0.35
(4) (1)
0.250.1
(3) (2)
0.30.1
4-0.35
Features
(1)
3.80.1
Terminal Connection
(1) : Input
(2) : Output
(3) : Ground
(4) : Terminal for external
capacitor
: EIAJ Monthly Code
Tolerance unless otherwise
specied : 0.1mm
( ) : Reference
(in mm)
Applications
1. IR headphone
2. Set Top Box for satellite broadcasting
Part Number
Nominal Center
Frequency (fn)
(MHz)
3dB
Bandwidth
(kHz)
20dB
Bandwidth
(kHz)
Insertion
Loss
(dB)
Spurious
Attenuation(1)
(dB)
Spurious
Attenuation(2)
(dB)
Input/Output
Impedance
(ohm)
SFSKB2M30GF00-R1
2.300
fn75 min.
650 max.
6.0 max.
25 min.
23 min.
[within 1.3 to 1.8MHz] [within 2.8 to 3.3MHz]
1000
SFSKB2M80GF00-R1
2.800
fn75 min.
650 max.
6.0 max.
25 min.
25 min.
[within 1.8 to 2.3MHz] [within 3.3 to 3.8MHz]
1000
SFSKB3M20FF00-R1
3.200
fn75 min.
650 max.
6.0 max.
30 min.
30 min.
[within 2.2 to 2.8MHz] [within 3.8 to 4.2MHz]
1000
SFSKB3M80GF00-R1
3.800
fn75 min.
650 max.
6.0 max.
30 min.
30 min.
[within 2.8 to 3.2MHz] [within 4.3 to 4.8MHz]
1000
SFSKB4M30GF00-R1
4.300
fn75 min.
650 max.
6.0 max.
30 min.
30 min.
[within 3.3 to 3.8MHz] [within 4.8 to 5.3MHz]
1000
SFSKB4M80GF00-R1
4.800
fn75 min.
650 max.
6.0 max.
30 min.
30 min.
[within 3.8 to 4.3MHz] [within 5.2 to 5.8MHz]
1000
SFSKB5M20GF00-R1
5.200
fn75 min.
650 max.
6.0 max.
30 min.
30 min.
[within 4.2 to 4.8MHz] [within 5.7 to 6.2MHz]
1000
SFSKB5M70GF00-R1
5.700
fn75 min.
650 max.
6.0 max.
30 min.
30 min.
[within 4.7 to 5.2MHz] [within 6.2 to 6.7MHz]
1000
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic
filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the packaging page.
34
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
2.0
1.8
1.3
1.6
1.3
1.8
(in mm)
Test Circuit
(1): Input
(2): Output
(3): Ground
(4): Terminal for
external capacitor
(1): Input
(2): Output
(3): Ground
(4): Terminal for
external capacitor
R1+Rg=R2=1.0k
Cc=33pF5%
C2=10pF (Including stray capacitance and
Input capacitance of RF Voltmeter)
E1: S.S.G. Output Voltage
(2)
(3)
S.S.G.
R1+Rg=R2=1.0k
Cc=15pF5%
C2=10pF (Including stray capacitance and
Input capacitance of RF Voltmeter)
E1: S.S.G. Output Voltage
C2
E2
E2
(4)
C2
RF
Voltmeter
(1)
R2
Rg
S.S.G.
SFSKB4M80GF00-R1
E1
E1
E2
(3)
C2
(2)
RF
Voltmeter
(1): Input
(2): Output
(3): Ground
(4): Terminal for
external capacitor
R1+Rg=R2=1.0k
Cc=39pF5%
C2=10pF (Including stray capacitance and
Input capacitance of RF Voltmeter)
E1: S.S.G. Output Voltage
R1
R2
(4)
Cc
Rg
(1)
(3)
S.S.G.
SFSKB4M30GF00-R1/SFSKB5M70GF00-R1
R1
(2)
Cc
R1+Rg=R2=1.0k
Cc=22pF5%
C2=10pF (Including stray capacitance and
Input capacitance of RF Voltmeter)
E1: S.S.G. Output Voltage
(4)
E1
E1
S.S.G.
RF
Voltmeter
(1)
Cc
Rg
(3)
E2
(2)
R1
C2
(4)
R2
(1)
Cc
Rg
R1
SFSKB2M80GF00-R1/SFSKB3M20FF00-R1
R2
SFSKB2M30GF00-R1/SFSKB3M80GF00-R1
RF
Voltmeter
(1): Input
(2): Output
(3): Ground
(4): Terminal for
external capacitor
(2)
(3)
S.S.G.
R1+Rg=R2=1.0k
Cc=27pF5%
C2=10pF (Including stray capacitance and
Input capacitance of RF Voltmeter)
E1: S.S.G. Output Voltage
E2
(4)
C2
(1)
R2
E1
Rg
R1
Cc
SFSKB5M20GF00-R1
RF
Voltmeter
(1): Input
(2): Output
(3): Ground
(4): Terminal for
external capacitor
35
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Frequency Characteristics
SFSKB2M80GF00-R1
0
10
10
20
20
Attenuation (dB)
Attenuation (dB)
SFSKB2M30GF00-R1
0
30
40
30
40
50
50
60
60
70
1.300
1.800
2.300
Frequency (MHz)
2.800
70
1.800
3.300
10
10
20
20
30
40
60
60
3.200
Frequency (MHz)
3.700
70
2.800
4.200
10
10
20
20
30
40
60
60
4.800
70
3.800
5.300
10
10
20
20
30
40
36
4.800
Frequency (MHz)
5.300
5.800
6.200
6.700
40
50
60
60
5.200
Frequency (MHz)
4.300
30
50
4.700
4.800
SFSKB5M70GF00-R1
0
Attenuation (dB)
Attenuation (dB)
SFSKB5M20GF00-R1
0
70
4.200
4.300
40
50
4.300
Frequency (MHz)
3.800
Frequency (MHz)
30
50
3.800
3.300
SFSKB4M80GF00-R1
0
Attenuation (dB)
Attenuation (dB)
SFSKB4M30GF00-R1
0
70
3.300
3.800
40
50
2.700
3.300
30
50
70
2.200
2.800
Frequency (MHz)
SFSKB3M80GF00-R1
Attenuation (dB)
Attenuation (dB)
SFSKB3M20FF00-R1
2.300
5.700
6.200
70
4.700
5.200
5.700
Frequency (MHz)
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
10
10
20
20
Attenuation (dB)
Attenuation (dB)
SFSKB2M30GF00-R1
0
30
40
30
40
50
50
60
60
70
0.300
1.300
2.300
Frequency (MHz)
3.300
70
0.800
4.300
10
10
20
20
30
40
60
60
3.200
Frequency (MHz)
4.200
70
1.800
5.200
10
10
20
20
30
40
60
60
5.300
70
2.800
6.300
10
10
20
20
30
40
3.800
4.800
Frequency (MHz)
5.800
6.800
6.700
7.700
40
50
60
60
5.200
Frequency (MHz)
30
50
4.200
5.800
SFSKB5M70GF00-R1
0
Attenuation (dB)
Attenuation (dB)
SFSKB5M20GF00-R1
0
70
3.200
4.800
40
50
4.300
Frequency (MHz)
3.800
Frequency (MHz)
30
50
3.300
2.800
SFSKB4M80GF00-R1
Attenuation (dB)
Attenuation (dB)
SFSKB4M30GF00-R1
70
2.300
4.800
40
50
2.200
3.800
30
50
70
1.200
2.800
Frequency (MHz)
SFSKB3M80GF00-R1
Attenuation (dB)
Attenuation (dB)
SFSKB3M20FF00-R1
1.800
6.200
7.200
70
3.700
4.700
5.700
Frequency (MHz)
37
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Notice
Ceramic Filters (CERAFILr) Chip Type SFSKB Series
1. Standard Reow Soldering Conditions
(1) Reow
Filter is soldered twice within the following temperature
conditions.
Temperature (C)
Peak
(260C max.)
260
200
Pre-heating
(150-170C)
100
Heating
(200C)
Gradual
Cooling
30 sec.
min.
60-120 sec.
60 sec.
max.
120 sec.
min.
[Component Direction]
Put the
component
laterally to the
direction in
which stress
acts.
Perforation
Susceptibility to
stress is in the order
of: A>C>B
Slit
38
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P51E.pdf
Dec.25,2015
Notice
Continued from the preceding page.
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
e Rating e
The component may be damaged if excessive mechanical
stress is applied.
e Handling e
Accurate test circuit values are required to measure
electrical characteristics.
Miscorrelation may be caused if there is any deviation,
especially stray capacitance, from the test circuit in the
specication.
39
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging
Minimum Quantity/Dimensions of Reel
Embossed Tape 330mm
3,000
(pcs.)
Dimensions of Reel
Leader
Cover Film
Trailer
160 to 190
Empty Components
Empty
240 to 280
(80)
(330)
400 to 560
2.20.2
13.00.2
Label
13.51.0
17.51.5
): Reference
(in mm)
@zz@{
~@|z@{
{@z@{
-4#0
'*+
1#0"'0#!2'-,-$$##"
F023+ #0+0)#"1'"#'1*571$!',%3.1'"#@
40
@z@{
@z@{
z@{
{@ Sz@z
{|@zz@|
~@zz@{
|@zz@{
{@z@{
HJB#$#0#,!#
(in mm)
P51E.pdf
Dec.25,2015
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
RoHS
7.90.2
3.00.1
1.80.2
Features
0.50.1
8.50.2
0.60.2
3.80.2
1.00.1
1.30.2
0.30.1
1.30.2
(1)
(2)
(3)
(1) : Input
(2) : Ground
(3) : Output
(in mm)
2.50.2 2.50.2
Attenuation (fn1)
(dB)
TPSKA4M50B00-R3
4.500
35 min.
50 min.
TPSKA5M50B00-R3
5.500
35 min.
70 min.
TPSKA6M00B00-R3
6.000
35 min.
70 min.
TPSKA6M50B00-R3
6.500
35 min.
70 min.
Part Number
For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic
filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the packaging page.
Test Circuit
L
1.0
1.0
1.5
1.0
R1
1.5
Rg
4.8
50
R2
RF
Voltmeter
S.S.G.
Rg=50
R1=330
R2=1.0k
(in mm)
L=15H
Frequency Characteristics
TPSKA5M50B00-R3
10
10
Attenuation (dB)
Attenuation (dB)
TPSKA4M50B00-R3
20
30
40
20
30
40
50
50
60
60
70
4.0
4.1
4.2
4.3
4.4
4.5
4.6
Frequency (MHz)
4.7
4.8
4.9
5.0
70
5.0
5.1
5.2
5.3
5.4
5.5
5.6
Frequency (MHz)
5.7
5.8
5.9
6.0
41
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Frequency Characteristics
TPSKA6M50B00-R3
10
10
Attenuation (dB)
Attenuation (dB)
TPSKA6M00B00-R3
20
30
40
20
30
40
50
50
60
60
70
5.5
5.6
5.7
5.8
5.9
6.0
6.1
Frequency (MHz)
6.2
6.3
6.4
70
6.0
6.5
6.1
6.2
6.3
6.4
6.5
6.6
Frequency (MHz)
6.7
6.8
6.9
7.0
600
10
800
20
500
20
600
30
400
30
400
40
300
40
200
50
200
50
60
100
70
1000
60
70
80
80
1.0
2.0
3.0
Frequency (MHz)
4.0
5.0
1.0
2.0
TPSKA6M00B00-R3
20
600
30
400
40
200
50
60
42
Attenuation (dB)
800
600
30
400
40
200
50
60
80
8.0
9.0
10.0
1000
800
70
10.0
20
80
3.0
9.0
10
70
2.0
8.0
1000
Group Delay Time ( sec.)
Attenuation (dB)
1.0
TPSKA6M50B00-R3
10
3.0
1.0
2.0
3.0
8.0
9.0
10.0
Attenuation (dB)
0
10
Attenuation (dB)
TPSKA4M50B00-R3
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Notice
Ceramic Trap (CERAFILr) Chip Type TPSKA Series
1. Standard Reow Soldering Conditions
(1) Reow
Filter is soldered twice within the following temperature
conditions.
Temperature (C)
Peak
(260C max.)
260
230
Pre-heating
(150-180C)
100
Heating
(230C)
Gradual
Cooling
30 sec.
min.
60-120 sec.
40 sec.
max.
120 sec.
min.
[Component Direction]
Perforation
Susceptibility to
stress is in the order
of: A>C>B
Slit
Put the
component
lateral to the
direction in
which stress
acts.
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
Continued on the following page.
43
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P51E.pdf
Dec.25,2015
Notice
Continued from the preceding page.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
e Rating e
The component may be damaged if excessive mechanical
stress is applied.
e Handling e
Accurate test circuit values are required to measure
electrical characteristics.
Miscorrelation may be caused if there is any deviation,
especially stray capacitance, from the test circuit in the
specication.
44
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P51E.pdf
Dec.25,2015
Packaging
Minimum Quantity/Dimensions of Reel
Embossed Tape 330mm
3,000
(pcs.)
Dimensions of Reel
Leader
Cover lm
Trailer
160 to 190
Empty Components
Empty
240 to 280 min.
2.20.5
801
3302
400 to 560
13.00.2
17.50.5
21.51.0
(in mm)
10 max.
4.30.1
Chip lter
(3)
+0.1
8.00.1
2.10.05
+0.1
Peeling strength 1.50.0
(0.1 to 0.7N)
Cover lm
0.30.05
16.00.2
9.00.1
7.50.1
2.00.1 4.00.1
2.30.1
+0.1
1.50.0
1.750.1
) : Reference
(in mm)
45
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
RoHS
0.30.2
0.20.2
1.4 max.
4.50.1
2.00.1
0.40.05
1.0 max.
4.1 max.
0.4(ref.)
0.4(ref.)
0.80.1
0.80.1
Features
1. Compact and high reliability and recommended for
automotive applications.
2. Can be combined with various ICs. The IC is determined by
the last number in the part number.
3. Stable demodulation characteristics can be obtained
without adjustment.
4. Stable temperature characteristics.
5. Available lead (Pb) free solder reflow.
1.50.1
Recovered
Audio 3dB BW
(kHz)
Recovered
Audio Output
(mV)
Distortion
(%)
S Curve
(mV)
IC
CDSCB10M7GA105A-R0
10.700 30kHz
220 min.
110 min.
1.5 max.
TEA5757HL
CDSCB10M7GA113-R0
10.700 30kHz
300 min.
110 min.
1.0 max.
TA2154FN
CDSCB10M7GA119-R0
10.700 30kHz
500 min.
75 min.
1.0 max.
TRF6901
CDSCB10M7GA121-R0
10.700 30kHz
390 min.
80 min.
1.0 max.
LV23100V
CDSCB10M7GA135-R0
10.700 30kHz
155 min.
75 min.
TH71101
CDSCB10M7GA136-R0
10.700 30kHz
140 min.
120 min.
TH7122
CDSCB10M7GF072-R0
10.700 (fn)
fn150 min.
130 min.
2.0 max.
TA31161
CDSCB10M7GF107S-R0
10.700 (fn)
fn80 min.
52 min.
3.0 max.
TA31272FN
CDSCB10M7GF109-R0
10.700 (fn)
fn100 min.
170 min.
3.0 max.
TK14588V
CDSCB10M7GF123-R0
10.700 (fn)
900 min.
TA31275FN
CDSCB10M7GF123S-R0
10.700 (fn)
900 min.
TA31275FN
CDSCB10M7GF126-R0
10.700 (fn)
400 min.
NJM2295AV
46
(in mm)
Center
Frequency (fo)
(MHz)
Part Number
1.50.1
30kHz Step
25kHz Step
10.700MHz30kHz
10.700MHz25kHz
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
2.6
3.0
1.0
2.0
1.0
(in mm)
Test Circuit
CDSCB10M7GA105A-R0
CDSCB10M7GA113-R0
36
35
34
33
32
31
TEA5757HL
(PHILIPS)
100k
30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
S.S.G.
TA2154FN (TOSHIBA)
1
29
28
10
27
11
26
10 11 12 13 14 15
30
+
2.2
AF OUT
D.C. OUT
X: CDSCB10M7GA113-R0
S.S.G.
Unit C: F
R:
10
Unit C: F
R:
X: CDSCB10M7GA105A-R0
CDSCB10M7GA119-R0
CDSCB10M7GA121-R0
Vcc (3.0V)
0.01
AF Output
35
34
33
TRF6901
(TEXAS INSTRUMENTS)
1000p
30
29
28
100p 10
27
11
26
12
25
13 14 15 16 17 18 19 20 21 22 23 24
0.01
47p
31
0.01
0.047
+
0.47
3.3k
+
1
0.1
0.22
+
0.47
S.G.
100p
10k
PIC16F84
2
1k
X: CDSCB10M7GA119-R0
2.2 +
10k
18 17 16 15 14 13 12 11 10
18 17 16 15 14 13 12 11 10
9 10 11 12 13 14 15 16 17 18
10k
10 +
32
100
48 47 46 45 44 43 42 41 40 39 38 37
36
LV23100V (SANYO)
1
36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19
82p
10
0.047
120p
4.7
22+
220k
0.047
15p
Vcc (3.2V)
0.01
0.015
10k
0.01
0.01
D.C. Output
AF Output
68p
75
IF Input
10p
AF OUT
100p
150
10p
AFC (n)
0.22
0.1
+
0.47
4.7
AFC (p)
330p
0.1
12
25
13 14 15 16 17 18 19 20 21 22 23 24
DC OUT
0.01
0.01
0.1
680p
0.01
48 47 46 45 44 43 42 41 40 39 38 37
+
100
0.01
10
+
0.01
0.1
0.01
Vcc (1.2V)
Vcc (3.0V)
10k
0.1
1k
Unit C: F
R:
L: H
2.2 + 10k
X: CDSCB10M7GA121-R0
0.1
Unit
C: F
R:
47
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Test Circuit
CDSCB10M7GA135-R0
Vcc (5.0V)
AF-OUT
CDSCB10M7GA136-R0
Vcc (5.0V)
FKS-OUT
330p
0.1
0.1
24 23 22 21 20 19 18 17
0.01
0.01
25
16
26
15
27
14
TH71101, TH71102, 13
TH71111 or TH71112 12
29
(MELEXIS)
28
0.01
0.01
15
27
14
TH7122
13
[Internal AFC Enabled] 12
29
(MELEXIS)
30
11
24 23 22 21 20 19 18 17
330p
16
26
30
11
31
10
32
31
10
32
12p C.D.
0.01
FKS-OUT
9
1
0.01
0.1
1000p
0.033
330p
330p
S.G.
1000p
0.01
AF-OUT
100k
C.D.
3.3k
330p
9
1
330p
28
220k
0.01
25
100k 100p
18 17 16 15 14 13 12 11 10
0.01
S.G.
X: CDSCB10M7GA135-R0
Unit C: F
330p
R:
+
10
1k
10k
X: CDSCB10M7GA136-R0
Unit C : F
R:
+
2.2
CDSCB10M7GF072-R0
0.1
CDSCB10M7GF109-R0
Vcc (3V)
0.01
1.2
Vcc (3.0V)
4.7
0.01
AF OUT
X
10p
0.01
D.C. Output
16 15 14 13 12 11 10
51k
+
33
0.01
IF IN
16
15
Unit C: F
R:
L: H
13
12
11
10
TK14588V (TOKO)
S.S.G.
51
0.01
X: CDSCB10M7GF072-R0
R: 820
14
0.01
0.01
4.7
0.01
0.01
0.01
8p
12k
0.01
0.01
1000p
TA31161 (TOSHIBA)
1
AF Output
Unit C: F
R:
L: H
X: CDSCB10M7GF109-R0
R: 820
CDSCB10M7GF126-R0
19
17
16
15
14
13
10
11
12
0.1
S.S.G.
48
0.1
0.1
0.01
0.1
18
17
16
15
1.8k
0.01
19
X: CDSCB10M7GF123-R0
Unit C: F
R:
0.01
14
13
12
11
10
NJM2295AV (JRC)
1
TA31275FN (TOSHIBA)
4
20
100p
0.01
18
8p
C.D.
180
10+
20
0.01
21
0.01
22
10+
23
0.01
1000p
24
DC-OUT
DC-OUT
10
AF OUT
0.01
Vcc (5.0V)
0.01
Vcc (5.0V)
10
CDSCB10M7GF123-R0
3300p
S.G.
X: CDSCB10M7GF126-R0
Unit C: F
R:
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
CDSCB10M7GA113-R0
Distortion
1
10
10.3
0.1
Input=100dB
fdev.=75kHz
fmod.=1kHz
Vcc=3.0V
10.4
10.5
10.9
11.0
11.1
10
100
Distortion
10
10.3
10.4
10.5
Distortion
0.1
Input=100dB
fdev.=60kHz
fmod.=1kHz
Vcc=3.0V
10.5
10.9
11.0
100
11.1
10
Distortion
10
10.3
100
100
10
Input=100dB
fdev.=50kHz
fmod.=1kHz
Vcc=5.0V
10.6
10.7
Frequency (MHz)
10.8
0.1
10.4
10.5
10.9
11.0
11.1
CDSCB10M7GA136-R0
1000
10.5
Input=100dB
fdev.=75kHz
fmod.=1kHz
Vcc=3.2V
CDSCB10M7GA135-R0
0.1
10.4
11.1
100
1000
11.0
AF Output
AF Output Voltage (mV)
10
10.4
10.9
1000
AF Output
100
10.3
CDSCB10M7GA121-R0
100
0.1
Input=100dB
fdev.=75kHz
fmod.=1kHz
Vcc=1.2V
CDSCB10M7GA119-R0
1000
10
AF Output
AF Output Voltage (mV)
10
AF Output
100
100
1000
100
1000
10.9
11.0
10
Input=100dB
fdev.=50kHz
fmod.=1kHz
Vcc=5.0V
0.1
10.4
10.5
10.6
10.7
Frequency (MHz)
10.8
10.9
11.0
49
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
CDSCB10M7GF109-R0
10
0.1
Input=100dB
fdev.=80kHz
fmod.=1kHz
Vcc=3.0V
10.4
10.5
10.9
11.0
100
100
10
10
10.3
11.1
0.1
Input=100dB
fdev.=64kHz
fmod.=1kHz
Vcc=3.0V
10.4
10.5
10.9
11.0
10
100
10.3
1000
100
1000
11.1
S Curve
CDSCB10M7GF123-R0
CDSCB10M7GF126-R0
2.5
4.0
2.0
Volt (V)
Volt (V)
3.0
1.5
1.0
2.0
0.5
0.0
10.3
50
10.4
10.5
10.6
10.7
10.8
Frequency (MHz)
10.9
11.0
11.1
1.0
10.3
10.4
10.5
10.6
10.7
10.8
Frequency (MHz)
10.9
11.0
11.1
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Notice
Ceramic Discriminator (CERAFILr) Chip Type CDSCB Series
1. Standard Reow Soldering Conditions
(1) Reow
Filter is soldered twice within the following temperature
conditions.
Temperature (C)
Peak
(260C max.)
260
230
Pre-heating
(150-180C)
100
Heating
(230C)
Gradual
Cooling
30 sec.
min.
60-120 sec.
40 sec.
max.
120 sec.
min.
[Component Direction]
Place the
component
laterally to the
direction in
which stress
acts.
Slit
Susceptibility to
stress is in the order
of: A>C>B
51
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P51E.pdf
Dec.25,2015
Notice
Continued from the preceding page.
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
e Rating e
The component may be damaged if excessive mechanical
stress is applied.
7
e Handling e
Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specication.
52
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P51E.pdf
Dec.25,2015
Packaging
Minimum Quantity/Dimensions of Reel
Embossed Tape 180mm
2,000
(pcs.)
Dimensions of Reel
Trailer
160 to 190
Leader
Cover lm
Empty Components
Empty
240 to 280
400 to 560
180 +0.1
-1.5
60 -0
+0.1
13.00.2
2.00.5
+1.0
13.0 -0
17.01.0
(in mm)
2.20.1
Cover lm
(3)
12.00.2
5.50.05
4.70.1
10
+0.1
1.5 -0
0.30.05
(9.0)
4.00.1
##*',%120#,%2&
0.1 to 0.7N
H{@+6@J
+0.1
1.5 -0
2.00.05
1.10.1
4.00.1
1.750.1
'+#,1'-,1-$00'#0.#
): Reference
(in mm)
53
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Crystal Filters
Dec.25,2015
RoHS
Lead
free
7.00.2
1.10.15
5.00.2
Features
1.2
(GND)
(GND)
(Out)
2.54
1.0
XDCAF
(In)
(GND)
(GND)
(in mm)
Applications
1. Radio communication
2. Base Station
3. Communication (IF) other
1.10.15
5.00.2
7.00.2
1.2
(GND)
(Out)
2.54
1.0
(GND)
XDCAG
(In)
(GND)
(GND)
(in mm)
5.00.2
7.00.2
Size
Center Frequency
(MHz)
Number
of Poles
7050
20 to 80
[Fundamental]
70 to 150
[3rd over tone]
XDCAG
XDCAH
1.2
(GND)
(GND)
(Out)
1.0
XDCAF
2.54
Series
1.10.15
Series
XDCAH
(In)
(GND)
(GND)
(in mm)
54
Part Number
Center
3dB
Stopband Insertion Ripple Spurious Response Guarantee Attenuation Termination Number Operating
Frequency Bandwidth Width
Loss
(dB min.)
(dB min.)
Impedance
of
Temperature
(MHz) (kHz min.) (dB max.) (dB max.) (dB max.)
[fo1MHz]
[fo900kHz]
(//pF)
poles Range (C)
7.5
18
[fo25kHz]
2.0
1.0
10
70
1500//2.5
20 to +70
3.75
18
[fo20kHz]
2.0
1.0
18
70
850//8.0
20 to +70
5.0
45
[fo25kHz]
5.0
1.0
40
70
610//3.0
[Cc=14.0pF]
20 to +70
4.0
38
[fo20kHz]
5.0
1.0
40
70
250//5.5
[Cc=20.5pF]
20 to +70
5.0
45
[fo25kHz]
5.0
1.0
60
80
560//4.0
[Cc=11.0pF]
20 to +70
6.0
40
[fo25kHz]
4.0
1.0
60
80
450//4.0
[Cc=9.2pF]
20 to +70
Please be sure to consult with our sales representative or engineer if you require other center frequencies.
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Test circuit
XDCAF21M400RAA00P0/XDCAF21M700MAA00P0
XDCAG38M850PGA00P0/XDCAG58M050MGA00P0
C1
C1
G
OUT
IN
560
560
S.G 50
L1
C2
OUT
IN
L.M 50
C2 L1
3pF
14pF
3pF
XDCAH50M850PHA00P0/XDCAH73M350QHA03P0
510
510
S.G 50
4pF
OUT
IN
11pF
L.M 50
4pF
55
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Frequency Characteristics
XDCAF21M400RAA00P0
c1: LOG 1 dB/
c2: LOG 10 dB/
REF -29.825 dB
REF -29.825 dB
SPF 40 kHz
SPF 2 MHz
XDCAG38M850PGA00P0
c1: LOG 1 dB/
c2: LOG 10 dB/
REF -1.559 dB
REF -1.559 dB
SPF 20 kHz
SPF 2 MHz
XDCAH50M850PHA00P0
c1: LOG 1 dB/
c2: LOG 10 dB/
56
REF -2.641 dB
REF -2.641 dB
SPF 20 kHz
SPF 2 MHz
XDCAF21M700MAA00P0
c1: LOG 1 dB/
c2: LOG 10 dB/
REF -5.336 dB
REF -5.336 dB
SPF 20 kHz
SPF 2 MHz
XDCAG58M050MGA00P0
c1: LOG 1 dB/
c2: LOG 10 dB/
REF -3.634 dB
REF -3.634 dB
SPF 20 kHz
SPF 2 MHz
XDCAH73M350QHA03P0
c1: LOG 1 dB/
c2: LOG 10 dB/
REF -4.566 dB
REF -4.566 dB
SPF 30 kHz
SPF 2 MHz
P51E.pdf
Dec.25,2015
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P51E.pdf
Dec.25,2015
Spurious
XDCAF21M400RAA00P0
c3: DLY 5 sec/
SPF 40 kHz
XDCAG38M850PGA00P0
c3: DLY 20 sec/
SPF 20 kHz
XDCAH50M850PHA00P0
c3: DLY 20 sec/
SPF 20 kHz
XDCAF21M700MAA00P0
c3: DLY 10 sec/
SPF 20 kHz
XDCAG58M050MGA00P0
c3: DLY 20 sec/
SPF 20 kHz
XDCAH73M350QHA03P0
c3: DLY 15 sec/
SPF 30 kHz
57
P51E.pdf
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dec.25,2015
Notice
Crystal Filters Chip Type XDCAF/XDCAG/XDCAH Series
e Soldering and Mounting e
Peak
(260C max.)
260
Temperature (C)
220
Heating
(220C)
120
Pre-heating
(150-180C)
10 sec. max.
60 sec. max.
Condition
Heating of the Soldering Iron
350C max.
Soldering Time
5 sec. max.
2. Wash
Do not clean or wash the component.
58
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
P51E.pdf
Dec.25,2015
Notice
Continued from the preceding page.
e Rating e
The component may be damaged if excessive mechanical
stress is applied.
e Handling e
(1) For safety purposes, connect the output of lters to the
IF amplier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of lters.
(2) The component is recommended for placement
machines employing optical placement capabilities. The
component might be damaged by mechanical force
depending on placement machine and condition. Make
sure that you have evaluated by using placement
machines before going into mass production. Do not use
placement machines employing mechanical positioning.
Please contact Murata for details beforehand.
(3) Do not reuse components once mounted onto a circuit
board.
(4) Crystal Filter
You are requested to approve our data sheet and
conrm the environment surrounding a crystal lter as
well.
In order to demonstrate sufficient performance, please
read the following notes.
(4)-1 Necessity for LC Tuned Circuit
When the stray capacitance of the PCB that mounts a
crystal lter is large, a tuned circuit for offsetting the
stray capacitance may be needed.
(4)-2 Termination Impedance
The original characteristic in a pass band, insertion loss,
ripple and bandwidth characteristic are no longer
acquired when termination impedance differs from a
rated value. The circuit impedance shall be measured
accurately and it has consistency to match on
termination conditions.
Please keep in mind that a passage region will move in
particular, if termination impedance does not match.
59
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging
Minimum Quantity/Dimensions of Reel
Embossed Tape 330mm
3,000
(pcs.)
60
35
7-10
22
R135
1001
3302
130.2
R55
8-R10
2
12-R5
4-R8
30
17.50.5
21
21.51.0
13
(in mm)
1.80.1
0.30.05
Marking
7.50.1
4.00.1
16.00.3
8.00.1
IN
1.5+0.1
0.0
7.50.1
1.750.1
5 max.
5.50.1
R0.3 max.
1.5+0.1
0.0
(in mm)
60
P51E.pdf
Dec.25,2015
P51E.pdf
Global Locations
For details please visit www.murata.com
Note
1 Export Control
For customers outside Japan:
No Murata products should be used or
sold, through any channels, for use in the
design, development, production, utilization,
maintenance or operation of, or otherwise
contribution to (1) any weapons (Weapons of
Mass Destruction [nuclear, chemical or biological
weapons or missiles] or conventional weapons)
or (2) goods or systems specially designed or
intended for military end-use or utilization by
military end-users.
For customers in Japan:
For products which are controlled items subject
to the Foreign Exchange and Foreign Trade Law
of Japan, the export license specied by the law
is required for export.
Aircraft equipment
Aerospace equipment
Undersea equipment
Medical equipment
Data-processing equipment
10
www.murata.com
Dec.25,2015