1. On the Tools menu, click Options, then click the Calculation tab and tick on the Iteration
2. In the spreadsheet "Calculations"
a. Insert values for two of the parameters T, Tw, W, RH in the cells C8-C11 (yellow cells)
b. Turn the "SWITCH" ON (set the value in the cell G2 (red cell) equal to 1 and press ENTER)
c. Iterate (by pressing F9) until the values in the green cells are constant. Read the results in the gree
d. To recalculate for different parameter values turn the "SWITCH" OFF (set the value in the cell G2 eq
Equations
Water vapour pressure (Goff formula, ref. 15)
273 . 16
^ 79586(1273 .16
pws =10132510 (10.
)+5 .02808 log10 (
)+
273 .16+T
273 . 16+T
273 . 16+T
^
+1 .50474104 (110 (8.
29692(
1 )))+
273 . 16
^ .76955(1273 .16
+0 . 42873103(10 (4
))1)2. 2195983 )
273 .16 +T
with pws in Pa and T in o Celcious
ress ENTER)
he results in the green cells
value in the cell G2 equal to 0 and press ENTER). Repeat steps 2a to 2c
Input data
Dry bulb temperature,
Wet bulb temperature,
Humidity (humidity ratio or specific humidity),
Relative humidity,
T=
Tw=
W=
RH=
120 oC
C
Control panel
SWITCH=
Err:523
Err:523
Calculations
Dry bulb temperature
Wet bulb temperature
Dew-point temperature
Humidity at T
Saturation humidity at T
Saturation humidity at Tw
Relative humidity
Percentage saturation
Partial pressure of water vapor in the air
Water vapor pressure at T
Water vapor pressure at Tw
T=
T w=
120.0
Err:523
Tdp=
W=
W s=
Err:523
0.152
W w=
Err:523
10.0%
RH=
PS=
p=
pw T=
198603
pw Tw=
Err:523
19860
Err:523
Err:523
w=
Err:523
Humid heat
cs=
1.290
Results
Dry bulb temperature,
Wet bulb temperature,
Dew-point temperature,
Humidity at T,
Saturation humidity at T,
Saturation humidity at Tw,
Relative humidity,
Percentage saturation,
Enthalpy,
Humid volume,
Humid heat,
Density of humid air,
Partial pressure of water vapor in the air
T=
T w=
Err:523
Err:523
Tdp=
Err:523
C
Err:523 kg water/kg dry air
W=
W s=
W w=
RH=
PS=
H=
vH=
cs=
=
p=
###
120.0
Err:523
Err:523
0.152
Err:523
10.0%
19860
198603
Err:523