w.
bz
fx
w.
--``-`-`,,`,,`,`,,`---
co
I@
A N
A M E R I C A N
N A T I O N A L
S T A N D A R D
ww
w.
bz
fx
w.
co
EAGES, WRENCH
OPENINGS, REFERENCE
ASME B107.17M-1117
bz
fx
w.
co
This Standard will be revised when the Society approves the issuance of a
new edition. There will be no addenda or written interpretations of the
requirements of this Standard issued to this edition.
ww
w.
This code or standard was developed under procedures accredited as meeting the criteria for
American National Standards. The Standards Committee that approved the code or standard
was balanced to assure that individuals from competent and concerned interests have had an
opportunity to participate. The proposed code or standard was made available for public review and comment which provides an opportunity for additional public input from industry,
academia, regulatory agencies, and the public-at-large.
ASME does not "approve," "rate," or "endorse" any item, construction, proprietary device,
or activity.
ASME does not take any position with respect to the validity of any patent rights asserted in
connection with any items mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicable Letters Patent, nor
assumes any such liability. Users of a code or standard are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, is entirely their own responsibility.
Participation by federal agency representative(s1or personb) affiliated with industry is not to
be interpreted as government or industry endorsement of this code or standard.
ASME accepts responsibility for only those interpretations issued in accordance with governing ASME procedures and policies which preclude the issuance of interpretations by individual volunteers.
Copyright (Q 1999 by
THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
All Rights Reserved
Printed in U.S.A.
--``-`-`,,`,,`,`,,`---
FOREWORD
(This Foreword is not part of ASME 8107.17M-1997.)
--``-`-`,,`,,`,`,,`---
ww
w.
bz
fx
w.
co
The American National Standards Committee B107, Sockets Wrenches and Drives, under
sponsorship by the American Society of Mechanical Engineers, held its organizational meeting
on June 28, 1967. Subsequently, the Committee was reorganized as an ASME Standards
Committee and its title was changed to Hand Tools and Accessories.
During 1994, 1995, and 1996 the B107 Committee reviewed the Go and No Go gage
sizes and agreed on changes to certain sizes.
After Standards Committee and ASME approval, and public review, this ASME B 107.17M1997, Gages, Wrench Openings, Reference, was approved as an American National Standard
by ANSI on February 6, 1997.
...
111
(The following is the roster of the Committee at the time of approval of this Standard.)
R. R. McCullough, Chair
R. B. Wright, Vice Chair
G. L. Fechter, Secretary
co
OFFICERS
ww
w.
--``-`-`,,`,,`,`,,`---
bz
fx
w.
COMMITTEE PERSONNEL
CONTENTS
v
1
...................................................
..........................................
.................................................
Application
Normative References
Requirements
bz
fx
w.
Scope
co
........................................................
Figures
1 Hex Gage Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 Square Gage Dimensions ...........................................
ww
w.
Tables
1A Hexagon or Square (Inch Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1B Incremental Amount (Inch Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2A Hexagon or Square (Metric Series ....................................
2B Incremental Amount (Metric Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3A Spark Plug Hexagon .............................................
vii
--``-`-`,,`,,`,`,,`---
...
111
Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Standards Committee Roster ............................................
2
3
4
5
6
7
8
ACME B107.17M-1997
The gages shall be made of steel, suitable for the purpose intended and hardened to 60 HRC minimum. The
hardness shall be tested using procedures outlined in
ASTM E 18.
co
1 SCOPE
2 APPLICATION
bz
fx
w.
3 NORMATIVE REFERENCES
w.
IS0 691-1983 (E), Wrench and Socket OpeningsMetric Series-Tolerances for General Use
IS0 11168:1995 (E), Socket Wrenches for Spark- and
Glow-Plugs
hblisher: International Organization for Standardization
1 rue de Varemb, Case postale 56, CH-1121 Genev
20, SwitzerlandSuisse
4.3.1 Rounding Method. To be used for determining dimensions for gages. When the next digit beyond the last digit to be retained is:
(a) less than 5, the last digit to be retained is not
changed;
(b) 5 or more, the last digit to be retained is increased
by one.
ww
4 REQUIREMENTS
4.1 Illustrations
1
--``-`-`,,`,,`,`,,`---
~~~
~~
~~
S T D * A S M E BLO7.17M-ENGL
ASME B107.17M-1997
Edge Break
[Note ilil
three (3)places
(typical)
co
Across flats
of hex
three (3)
places
itypicali
Across flats
'No Go' G a p
Gage
1.1550 Wtolerance =
bz
fx
w.
--``-`-`,,`,,`,`,,`---
+O.o002 in.
or
+O.W6
mm
in. or
2;
mm
Dis an optional indicator for the minimum wrench opening depth from product
specification or standard.
a minimum dimension = 0.167 C
for C less than or equal to 1 in. or 25 mm
4.oooo
4.00
1.15M)wtdemnce
1.4142 Wtolerance
Hmin
ar
+O.oooO
= -1%
(percent) oi G'".
0'
+o.w
w.
-1% (percent)~l t mm
0.333in. or 8.33 mm
for A greater than 1 in. or 25 mm
ww
If Hminis made equal to O, then Hmincan be used as the optional depth indicator.
NOTE:
(1) Do not include the iength of the edge break as part of the "No Go' gaging procedure. If edge break is more than 0.010
in. or 0.26 mm. the diference must be edded to D.
2
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
S T D - A S M E BL07-17fl-ENGL 1977
ASME B107.17M-1997
Edge Break
[Note (111
J LZg!!!&
Across flats
of square
two (2)
Gage
bz
fx
w.
co
'Go'
places
places
(typical)
places
(typical)
$;Ein.
or
$:;
mrn
Dis an optional indicator for the minimum wrench opening depth from product
specificationor standard.
Wtolerance
1.4142
1.4142 Wtolerance
Hmin
or
+o.m
-cl.ooo
+o.oooo
+o.oo
Or
-1% (percent) of G
w.
If H
ni,
NOTE:
--``-`-`,,`,,`,`,,`---
ww
(1) Do not include the length of the edge break as part of the "No Go" gaging procedure. If edge break is more than 0.010
in. or 0.25 mm. the difference must be added to D.
3
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Size
in.
3kZ
7 1 ~
is
932
916
1%
7h!2
764
1'4
1?164
%
932
7~1
I
K
l7 h ~
916
1%
%
2'hz
''/IS
Y4
'452
'%6
1
'716
1
1111e
1'le
1%
1'14
1%~
0.0853
0.1013
0.1163
0.1323
O. 1633
0.1953
0.2103
0.2263
0.2413
0.2573
0.2733
0.2883
0.3043
0.3223
0.3533
0.3843
0.4153
0.4463
ww
1%
1%I
1'h
i9hI
1%
l'%s
1%
0.0789
0.0945
0.1100
0.1258
0.1570
O. 1883
0.2039
0.2195
0.2350
0.2510
0.2666
0.2820
0.2978
0.3135
0.3447
0.3762
0.4074
0.4387
0.5015
0.5327
0.5640
0.5952
0.6265
0.6577
0.6895
0.7520
0.7832
0.8145
0.8770
0.9395
1.O025
1.O650
1.1275
1.1900
1.2525
1.3150
1.3775
1.4400
1.5030
1.5655
1.6280
1.6905
1.7530
1.8155
1.8780
1.9405
2.0035
2.0660
w.
916
"hz
l1'/1S
11
1'#E
2
2'hS
W
Nominal
Size
in.
2%
2%
2'14
2%
2%
27116
28
2%
2%
21111~
2%
2%
2%
2'916
3
31' 16
3%
3%
3%
3916
'Go' Gage A
TOI.: +O.o002
-0.oooO
in.
2.1285
2.1910
2.2535
2.3160
2.3785
2.4410
2.5040
2.5665
2.6290
2.6915
2.7540
2.8165
2.8790
2.9415
3.0050
3.0675
3.1300
3.1925
3.2550
3.3175
3.3800
3.4425
3.5060
3.5685
3.6310
3.7560
3.8185
3.8810
3.9435
4.0070
4.0695
4.1320
4.1945
4.2570
4.3195
4.3820
2.1525
2.2155
2.2775
2.3425
2.4045
2.4675
2.5315
2.5935
2.6565
2.7195
2.7835
2.8455
2.9085
2.9735
3.0355
3.0985
3.1625
3.2255
3.2875
3.3525
3.4145
3.4775
3.5405
3.6045
3.6665
3.7935
3.8565
3.9185
3.9835
4.0455
4.1O 8 5
4.1725
4.2355
4.2975
4.3625
4.4245
4.4875
4.5505
4.6765
4.8035
5.0555
5.3075
5.4345
5.4975
5.5615
5.6865
5.8135
6.1925
bz
fx
w.
't
'Go" Gage A
TOI.: +O.o002
-0.oooO
in.
0.5103
0.5423
0.5733
0.6053
0.6363
0.6673
0.6993
0.7633
0.7943
0.8263
0.8883
0.9533
1.0153
1.O775
1.1425
1.2045
1.2675
1.3315
1.3945
1.4575
1.5205
1.5845
1.6465
1.7085
1.7735
1.8355
1. a 8 5
1.9635
2.0255
2.0885
38
37/r6
3%
31
'16
3%
394
3%
37le
3'%s
4
41176
4%
4%
4%
4%
4%
4%6
4%
4%
4%
5
5%
5%
5%6
5%
5%
5Y4
6%
--``-`-`,,`,,`,`,,`---
W
Nominal
co
ASME B107.17M-1997
4.4445
4.5070
4.6320
4.7570
5.0070
5.2580
5.3830
5.4455
5.5080
5.6330
5.7580
6.1340
2 4 7 7 E 0 7 5 9 b 7 0 Ob07053 O'ib E
S T D O A S M E B207.17M-ENGL
Incremental
Amount
W
in.
Added to W
in.
0.0008
0.0012
0.0015
~~~~
E
/'
lh to less than
''I16
0.0020
0.0025
0.0030
0.0035
co
0.0040
2% to less than 3
3 to less than 3%
0.0050
0.0060
0.0070
0.0080
bz
fx
w.
7 % to
~ less than 81
'4
81
' 4 to less than 9%
g1/4fo less than or equal to 1O1h
0.0090
0.0100
0.0110
0.0120
w.
tolerance
+o.oooo
-0.0002
ww
--``-`-`,,`,,`,`,,`---
or
C =W
+o.oooo
tolerance -0.0002
5
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
1957
S T D * ASME
U 7 5 b 7 0 Ob0705Y T82
'Go' Gaga A
mm
mm
(in.)
mm
lin.)
W
Nominal
size
mm
2
2.5
3
2.01
2.51
3.015
(0.0791)
(0.0988)
(0.1187)
2.155
2.661
3.165
(0.0848)
(0.1048)
(0.1246)
38
39
40
38.10
39.10
40.10
3.2
4
4.5
3.216
4.02
4.52
(0.1266)
(O. 1583)
(0.1780)
3.367
4.175
4.681
(0.1326)
(0.1644)
(0.1843)
41
42
43
5
5.5
6
5.02
5.52
6.03
(0.1976)
(0.2173)
(0.2374)
5.185
5.690
6.195
(0.2041)
(0.2240)
(0.2439)
44
45
46
6.3
7
8
6.33
7.03
8.03
(0.2492)
(0.2768)
(0.3161)
6.498
7.205
8.215
(0.2558)
(0.2837)
(0.3234)
47
48
49
9
10
11
9.03
10.04
11.04
(0.3555)
(0.3953)
(0.4346)
9.225
10.235
11.245
(0.3632)
(0.4030)
(0.4427)
50
52
12
13
14
15
16
17
18
19
20
12.04
13.04
14.05
15.05
16.05
17.05
18.05
19.06
20.00
(0.4740)
(0.5134)
(0.5531)
12.255
13.265
14.275
(0.4825)
(0.5222)
(0.5620)
55
(0.5925)
(0.6319)
(0.6713)
(0.7106)
(0.7504)
(0.7898)
15.285
16.295
17.305
18.315
19.325
20.335
(0.6018)
(0.6415)
(0.6813)
(0.7211)
(0.7608)
(0.8006)
20.6
21
22
23
24
25
26
27
28
29
30
31
32
33
34
20.66
21.06
22.06
23.06
24.06
25.06
26.08
27.08
28.08
29.08
30.08
31.O8
32.08
33.08
34.10
(0.8134)
(0.8291)
(0.8685)
(0.9079)
(0.9472)
(0.9866)
( 1.O2681
(1.0661)
(1.1055)
(1.1449)
(1.1843)
I l.2236)
(1.2630)
(1.3024)
(13 2 5 )
35.10
36.10
37.10
(1.3819)
(1.4213)
(1.4606)
20.941
21.345
22.355
23.365
24.375
25.385
26.400
27.410
28.420
29.430
30.440
31.450
32.460
33.470
34.480
35.490
36.500
37.510
35
36
37
(in.)
(1.5000)
(1.5394)
(1.5787)
38.520
39.530
40.540
(1.5165)
(1.5563)
(1.5961)
41.10
42.10
43.10
(1.6181)
(1.6575)
(1.6969)
41.550
42.560
43.570
(1.6358)
(1.6756)
( 1.7154)
44.10
45.10
46.10
(1.7362)
(1.7756)
(1.8150)
44.580
45.590
46.600
(1.7551)
(1.7949)
(1.8346)
47.10
48.10
49.10
(1.8543)
(1.8937)
(1.9331)
47.610
48.620
49.630
(1.8744)
(1.9142)
(1.9539)
50.10
52.10
54.10
(1.9724)
(2.0512)
(2.1299)
50.640
52.660
54.680
(1.9937)
(2.0732)
(2.1528)
55.12
60.12
65.12
70.12
74.12
75.15
80.15
85.15
90.15
(2.1701)
(2.3669)
(2.5638)
(2.7606)
(2.9181)
(2.9587)
(3.1555)
(3.3524)
(3.5492)
55.690
60.740
65.790
(2.1925)
(2.3913)
(2.5902)
70.840
74.880
75.890
80.940
85.990
91.040
(2.7890)
(2.9480)
(2.9878)
(3.1866)
(3.3854)
(3.58431
130
135
145
150
155
165
170
180
185
95.15
100.15
105.20
110.20
115.20
120.20
130.20
135.20
145.20
150.25
155.25
165.25
170.25
180.25
185.25
(3.7461)
(3.9429)
(4.1417)
(4.3386)
(4.5354)
(4.7323)
(5.1260)
(5.3228)
(5.7165)
(5.9154)
(6.1122)
(6.5059)
(6.7028)
(7.0965)
(7.2933)
96.090
101.140
106.190
111.240
116.290
121.340
131.440
136.490
146.590
151.640
156.690
166.790
171.840
181.940
186.990
200
210
200.25
210.25
(7.8839)
(8.2776)
202.140
212.240
(3.7831I
(3.9819)
(4.1807)
(4.3795)
(4.5783)
(4.7772)
(5.1748)
(5.3736)
(5.7713)
(5.9701)
(6.1689)
(6.5665)
(6.7654)
(7.1630)
(7.3618)
(7.9583)
(8.3559)
mm
w.
54
60
65
70
74
75
80
85
90
(0.8244)
(0.8404)
(0.8801)
(0.9199)
(0.9596)
(0.9994)
( 1.0394)
(1.0791)
(1.1189)
(1.1587)
(1.1984)
( 1.2382)
(1.2780)
(1.3177)
(1.3575)
(1.3972)
(1.4370)
(1.4768)
co
bz
fx
w.
'Go" Gage A
+o.m(+O.O002)
TOI.:
-0.000 (-0.ooOo)
ww
W
Nominal
size
95
1O0
105
110
o;:
GENERAL NOTES:
(a) Minimum wrench opening = 'Go" Gage A extreme limit minimum size.
(b) Wrench opening tolerance = 'No Go" maximum Gage C - 'Go" minimum Gage A.
(c) Maximum wrench opening = 'No Go" Gage C extreme limit maximum size.
(d) Conversion to inches given in parentheses.
NOTES FOR ADDITIONAL SIZES NOT LISTED IN TABLE 2A:
(1) To determine 'Go" Gage A dimensions for W nominal sizes (all calculations must be in millimeters).
'Go" Gage A = W (not rounded) + incremental amount from Table 28.
Round 'Go" Gage A value to 2 decimal places (see [Note (111 from Table 2B). Use rounding method outlined in para. 4.3.1.
6
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
--``-`-`,,`,,`,`,,`---
ASME B107.17M-1997
ASME B107.17M-1997
~~~~~
W
mm
incremental
Amount
Added to W
mm
2 to less than 3
3 to less than 3.2
0.01 5
10 to less than 14
14 to less than 19
0.06
19 to less than 26
26 to less than 34
co
0.08
0.10
0.12
34 to less than 55
55 to less than 75
0.15
0.20
0.25
bz
fx
w.
GENERAL NOTES:
(a) Round Go Gage A to 3 decimal places when using 0.015
m m incremental amount.
tolerance
w.
+o.ooo
-0.006
+ 0.013
+o.ooo
tolerance
-0.006
ww
7
--``-`-`,,`,,`,`,,`---
ASME B107.17M-1997
mm
in.
12 [Note (111
14 [Note (111
16
17.5
18 [Note (111
19 [Note (111
20.8
22.2
25.5 [Note (311
%
''/IS
[Note (211
74
'%S
'Go' Gage A
.
+0.008(+0.00021
101.:
-0.o0O(-0.oooo)
mm
(in.)
mm
(in.)
12.04
14.05
15.977
(0.4740)
(0.553)
(0.6290)
12.255
14.275
16.187
(0.4825)
(0.5620)
(0.6373)
17.513
18.05
19.06
(0.6895)
(0.7106)
(0.7504)
17.762
18.315
19.325
(0.6993)
(0.721 1)
(0.7608)
20.828
22.327
25.56
(0.8200)
(0.8790)
(1.0063)
21.064
22.563
25.86
GENERAL NOTES:
. Nominal
sin,
(0.8293)
(0.8883)
(1.0181)
co
W
Nominal
Size
bz
fx
w.
(a) Minimum wrench opening = "Go" Gage A extreme limit minimum size.
(b) Wrench opening tolerance = "No Go" maximum Gage C - 'Go" minimum Gage A.
(c) Maximum wrench opening = 'No Go" Gage C extreme limit maximum size.
(d) Conversion to inches given in parentheses.
ww
w.
NOTES:
(1) Values correspond to TABLE 2A HEXAGON OR SQUARE (METRIC SERIES).
(2) Values correspond to TABLE 1A HEXAGON OR SQUARE (INCH SERIES).
(3) Values correspond to Table 1-Wrench dimensions of IS0 11168:1995 (E).
8
--``-`-`,,`,,`,`,,`---