Recommendation of CE Expansion
Product Name
Confidentiality Level
WCDMA RNP
Product Version
Total 17 Pages
1.0
Recommendation of CE Expansion
(For Internal Use only)
Prepare
d by
Date
Luo Dan
Reviewe
d by
Date
Approve
d by
Date
2010-08-10
9/11/2016
Huawei Confidential
Page 1 of 17
Recommendation of CE Expansion
Contents
1 Overview...................................................................................... 4
1.1 Overview............................................................................................................................................................4
1.2 Basic of CE........................................................................................................................................................4
2 Expansion Strategy.......................................................................6
2.1 Overview............................................................................................................................................................6
2.2 Preparation.........................................................................................................................................................6
2.2.1 Triggered Items.........................................................................................................................................6
2.2.2 Metric........................................................................................................................................................7
2.3 Working Flow....................................................................................................................................................8
3 Optimization Methods.................................................................11
3.1 Overview..........................................................................................................................................................11
3.2 Load Control....................................................................................................................................................11
3.3 Dynamic CE.....................................................................................................................................................12
3.4 CE Consumption..............................................................................................................................................14
3.4.1 SRB Consumption..................................................................................................................................14
4 Conclusion.................................................................................. 16
5 References.................................................................................17
9/11/2016
Huawei Confidential
Page 2 of 17
List of Figures
Figure 2-1 Counters may used................................................................................................................................8
Figure 2-2 Work Flow.............................................................................................................................................9
Figure 3-1 Resources used by different load control algorithms..........................................................................12
Figure 3-2 LDR actions for CE.............................................................................................................................12
Figure 3-3 HSUPA CEs consumption...................................................................................................................13
Figure 3-4 Overview of dynamic CE resource management................................................................................13
Figure 3-5 SRB CE Consumed in HSDPA...........................................................................................................15
Recommendation of CE Expansion
Overview
1.1 Overview
The present document gives a general way of Channel Element expansion
planning steps. Some basic ideas of CE are included too.
Procedures of hardware expansion are introduced in section 2and parameter
optimization is covered in section 3. If part of below sections is used in the
report to operator, please select proper content accordingly.
1.2 Basic of CE
CE is the logical quantitative concept of DSP capability in baseband board
representing the capability of modulation/demodulation and coding/decoding.
This word is normally used in NodeB side while credit is more common in RNC
side (e.g. in counters of RNC) although these two words have the same
concept. The relation is 1 CE=2 credit in UL and 1CE=1credit in DL.
The CE resource in one NodeB is shared by cells/cell groups. It is one of the
kinds of resource that directly limit the cell load. Especially in live network,
customer may need suggestion from vendor, or even plan to guide the
expansion of CE as its a fast and efficient way to add more boards and
eliminate the congestions caused by CE limitation.
9/11/2016
Huawei Confidential
Page 4 of 17
Recommendation of CE Expansion
The total CE capacity is restricted by two aspects. One is the physical capacity
which is limited by the baseband board configuration. Another one is license.
The overall capacity will be MinPhysical capacity, License
Detailed of CE usage is not depicted in the protocol. The protocals describe the
coding and modulation principle but not the realization. The way of baseband
process and the metric of describing the capability are designed by vendor
itself.
9/11/2016
Huawei Confidential
Page 5 of 17
Recommendation of CE Expansion
Expansion Strategy
2.1 Overview
The expansion strategy in this section introduces the steps of hardware
expansion of baseband board (WBBP etc.). The targets for CE expansion are
decreasing CE congestions and to meet the future traffic needs.
In planning period of network constructions, the planning of CE per site is
usually based on traffic model given by operaters. But in live network expansion
period, it is not always easy to use planning tools due to:
Usually the customer cannot or will not provide a detailed and precise
traffic model for planning.
Many planning tools (E.g. RND) put emphasis on the whole instead of
sites. And in live network its very common to have huge difference in
traffic or CE utility distribution among sites (or sites with the same
scenario).
So the strategy on a site basis is explained here to provide the estimation which
is more close to the network traffic.
2.2 Preparation
2.2.1 Triggered Items
The possible reasons for any resource expansion may come from:
9/11/2016
Huawei Confidential
Page 6 of 17
Recommendation of CE Expansion
The most important items and thresholds can be decided according to network
condition and top concerns.
During data preparation period, the data to be analyzed should be of certain
length to be representative (two weeks for example). Furthermore the peak
value can be averaged to exclude abnormal burst in sites with special event
during observing period.
2.2.2 Metric
The average CE utility ratio during the measurement period would be:
The result above is on a cell basis and by summing up we can have the NodeB
CE utility. Note that sometimes the sum of peak value will exceed the CE
capacity. This is because the maximum CE utility of every cell may happen at
different point in the measurement period.
9/11/2016
Huawei Confidential
Page 7 of 17
Recommendation of CE Expansion
Congestion times can be the sum of RRC and RAB failures caused by CE
rejection in UL and DL.
UL: VS.RAB.FailEstCs.ULCE.Cong +
VS.RAB.FailEstPs.ULCE.Cong + VS.RRC.Rej.UL.CE.Cong
DL: VS.RAB.FailEstCs.DLCE.Cong +
VS.RAB.FailEstPs.DLCE.Cong + VS.RRC.Rej.DL.CE.Cong
UL
VS.RAB.FailEstCs.ULCE.Cong
VS.RAB.FailEstPs.ULCE.Cong
VS.RRC.Rej.UL.CE.Cong
VS.LC.ULCreditUsed.CELL
VS.LC.ULCreditUsed.CELL.Max
DL
VS.RAB.FailEstCs.DLCE.Cong
VS.RAB.FailEstPs.DLCE.Cong
VS.RRC.Rej.DL.CE.Cong
VS.LC.DLCreditUsed.CELL
VS.LC.DLCreditUsed.CELL.Max
The congestion counters used are number of RRC/RAB failures and occupied
CE in the measurement period. Although the direct shortage of CE is hard to
obtain, we still consider the number of rejection can reflect part of the fact that
more CE should be added to sites with higher congestions.
To get the counters, the Network Element takes the samples periodically. At the end of
the measurement period, the accumulated data will be divided by the number of samples
and the result will be the counter value. So it is common for most of the counters having
average results. For some items there're dedicated counters for recording the peak value
in the measurement period.
9/11/2016
Huawei Confidential
Page 8 of 17
Recommendation of CE Expansion
Ravg is the average utility ratio reflecting the daily/hourly average utility ratio. It
equals to Used CE/ CE Capacity using counters above in 2.2.2. THD1 is the
threshold of CE congestion times for adding resource. Nrep is the threshold of
number of days/BHs with threshold over THD1. The thresholds can be adjusted
based on different sets of parameters above.
2) Proportional Distribution
With defined number of baseband boards to be added (the number of CE is
also defined with typical type of baseband board), we can also get the allocation
in a proportional way.
THD2= CongTOT/ Nbd
Where THD2 is the threshold for expansion, CongTOT is the total congestion
times of all sites in selected time and Nbd is the number of boards to be added.
For each site, the number of boards to add in site i will be:
Ni = [Congi / THD2] + 1
9/11/2016
Huawei Confidential
Page 9 of 17
Recommendation of CE Expansion
Where Congi indicates the congested times of site i and [ ] is the integer of
numbers inside.
If theres traffic model forecast for future growth, the expected CE can be calculated by
adding that for PS, CS and other services. The part of CE eliminating current congestions
should also be included in the traffic margins. Normally the model is not for typical site
so the result is not detailed to a site basis. Its not covered here in present document.
9/11/2016
Huawei Confidential
Page 10 of 17
Recommendation of CE Expansion
Optimization Methods
3.1 Overview
Before hardware expansion deployed, the parameter optimization also helps to
decrease the congestions due to CE limitation. Basic CE consumption is also
included in this part.
DCCC which is not covered below can also change consumed CE when
changing the BE data rate.
9/11/2016
Huawei Confidential
Page 11 of 17
Recommendation of CE Expansion
In LDR action, the relative procedure triggered by any kinds of resource can
have a direct influence on CE consumed:
3.3 Dynamic CE
In the uplink the CE is shared by HSUPA and R99 channels. When the data rate
of HSUPA is high, the UL CE consumed is really considerable. That's quite
possible of the UE having a very small throughput while CE corresponding to
maximum rate is allocated, which is a significant waste of resource.
9/11/2016
Huawei Confidential
Page 12 of 17
Recommendation of CE Expansion
The algorithm periodically adjusts the available CE resource for the users or
when a new user is permitted. NodeB calls back the unused CE when detecting
it's not fully used in a certain time, and also try to balance CE equitably among
serving RLS. In that case the CE utility ratio is improved. Note that when
Dynamic CE is activated, the HSUPA DCCC function should be deactivated
from RNC side.
In RAN11, 2ms fast CE scheduling is introduced with boards EBBI/EBBC/
WBBPb. Boards older than that adopt 500ms CE scheduling.
9/11/2016
Huawei Confidential
Page 13 of 17
Recommendation of CE Expansion
The relation between HSUPA dynamic CE resource management and HSUPA DCCC is:
If all cells in AS support HSUPA dynamic CE, BE data rate is adjusted to MBR if it's not.
HSUPA DCCC doesn't work.
If any cell in AS doesn't support HSUPA dynamic CE or the RNC cannot get any
capability information on this, HSUPA DCCC works.
3.4 CE Consumption
The CE consumption can be found in RNP Reference Guide, with conditions
and restrictions inside. The CE for R99 Bearers is regular and easy to see.
For HSDPA, seperate dedicated module is used to process HSDPA traffic. Thus
the HSDPA channel (HS-DSCH, HS-SCCH) itself don't cost any CE. But it's not
the same story for HSUPA (with original name E-DCH) and the CE consumed
for a high speed HSUPA service is quite remarkable. (However, NodeB of 3900
series have improvement and Dynamic CE would help as well)
9/11/2016
Huawei Confidential
Page 14 of 17
Recommendation of CE Expansion
Till second quarter of 2010, most UE still cannot support SRBoverHSDPA. So far most
SRB in DL is still on DPCH and cost one CE.
For most HSUPA UE, the SRBoverHSUPA is supportive.
9/11/2016
Huawei Confidential
Page 15 of 17
Recommendation of CE Expansion
Conclusion
9/11/2016
Huawei Confidential
Page 16 of 17
Recommendation of CE Expansion
5
3GPP 25.213
3GPP 25.331
RAN
RAN
Feature Description
RNP Reference
9/11/2016
References
Guide
Huawei Confidential
Page 17 of 17