LUBRICATION
ONVEHICLE INSPECTION
1.
(a)
2.
(a)
7
20
4
40
16
60
27 38
80 100
A66623
(b)
(c)
(d)
(e)
Oil Pressure
Switch
A63370
At idle
At 3,000 rpm
A63373
Author:
Date:
1196
172
LUBRICATION
(f)
Adhesive
(g)
A50082
(h)
(i)
Author:
Date:
1197
173
LUBRICATION
COMPONENTS
Fan and Generator V Belt
54 (551, 40)
25 (255, 18)
37 (377, 27)
Generator Assy
7.0 (71, 62 in.lbf)
Clip
Clip
Clip
A64042
Author:
Date:
1198
174
LUBRICATION
Engine Wire
Seal Washer
11 (112, 8)
11 (112, 8)
11 (112, 8)
Clamp Bracket
Clamp Bracket
11 (112, 8)
Ventilation Hose
Clamp Bracket
A64043
Author:
Date:
1199
175
LUBRICATION
Transverse Engine
Engine Mounting Bracket
47 (479, 35)
29 (296, 21)
Timing Chain or
Belt Cover Subassy
Vribbed Belt
Tensioner Assy
69 (704, 51)
Crankshaft Pulley
Oil Seal
9.0 (92, 80 in.lbf)
Crankshaft timing
Sprocket
Gasket
37 (377, 27 )
Nonreusable part
A65220
Author:
Date:
1200
176
LUBRICATION
Drive Rotor
Driven Rotor
Oil Pump Body
Nm (kgfcm, ftlbf)
: Specified torque
A65213
Author:
Date:
1201
177
LUBRICATION
REPLACEMENT
1.
(a)
2.
3.
(a)
4.
(a)
(b)
5.
(a)
(b)
B08737
(c)
A30890
6.
(a)
7.
(a)
8.
9.
10.
11.
Author:
Date:
1202
178
LUBRICATION
OVERHAUL
(1)
1.
(a)
2.
(a)
(b)
(2)
(3)
A64849
A64847
(c)
A32175
(d)
A32176
Author:
Date:
1203
179
LUBRICATION
(e)
(f)
(g)
(h)
3.
(a)
A32177
A32178
Mark
A62990
A64847
(1)
(2)
(3)
A64849
Author:
Date:
1204
1710
LUBRICATION
REPLACEMENT
CAUTION:
Prolonged and repeated contact with mineral oil will result in the removal of natural fats from
the skin, leading to dryness, irritation and dermatitis. In addition, used engine oil contains potentially harmful contaminants which may cause skin cancer.
Exercise caution in order to minimize the length and frequency of contact of your skin to used
oil. Wear protective clothing and gloves. Wash your skin thoroughly with soap and water, or use
waterless hand cleaner to remove any used engine oil. Do not use gasoline, thinners, or solvents.
In order to preserve the environment, used oil and used oil filter must be disposed of only at
designated disposal sites.
1.
REMOVE ENGINE UNDER COVER RH
2.
DRAIN ENGINE OIL
(a) Remove the oil pan drain plug and drain the engine oil.
3.
(a)
4.
(a)
(b)
(c)
Lightly screw the oil filter into place, and tighten it until the
gasket contacts the seat.
Using SST, tighten it an additional 3/4 turn.
SST 0922806501
SST
B00182
3/4 turn
(d)
A65962
5.
(a)
Author:
Date:
1205
1711
LUBRICATION
6.
7.
Author:
Date:
1206