The following information will help you download, install, setup and use ANSYS with the CMC License
Management System.
Table of Contents
Prerequisites for Installing ANSYS with CMC License Management System on page 1
Setting up CADpass v3.0 for use with ANSYS on page 2
Obtaining the Software on page 3
Installing the Software on page 3
Setting up ANSYS License Files on page 4
Other Resources on page 4
4. You cannot use any general terms as the login name (your local machine login name must be
unique).
5. Any names containing the following are prohibited:
admin (or administrator)
cmcmgr
root
stcmgr
super
sysadm
user
owner
student
system
3. When the CAD access window appears, double click the icon "ANSYS". You can also right click
and select Start. A message box appears, and a green check appears on the left of the icon.
7. When you get to the Creo Parametric (Pro/ENGINEER) section, choose "Skip this step and configure
later"
1. Do the same for the Unigraphics NX, Solidworks, and Autodesk Inventor sections
8. During installation, you will be prompted for the second media folder. Input the directory
path for the second ISO folder, and choose Okay
9. Once installation is done, click Next to continue
10.The License Installation Configuration Log window will appear. Once done, choose Exit
1. If this is a new installation of ANSYS, you might be asked to setup your license file. See the "Setting
up ANSYS License Files" section below.
11.At the end of the installation, you will be asked to complete a survey. At this point, just click
Finish
Other Resources