Anda di halaman 1dari 3

ADDENDUM

70012-0251-00
06/2010

Whats New in ION Enterprise 6.0


Service Pack 1
The following document outlines whats new in PowerLogic ION Enterprise 6.0
Service Pack 1 (SP1).

In This Document
New

Features in ION Enterprise 6.0 SP1 . . . . . . . . . . . . . . . . . . . . . . . . . . 2

New Device Support in ION Enterprise 6.0 SP1 . . . . . . . . . . . . . . . . . . . . . . . . 2


Enhanced Report Pack Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Errata

...................................................... 3
Regional Settings Configuration for WebReach and Web Reporter . . . . . . . . . . 3
Using Reporter on Secondary Server or Client . . . . . . . . . . . . . . . . . . . . . . . . . 3

Additional Information

ION Enterprise User Guide and online Help

Your device documentation

Schneider Electric
2195 Keating Cross Road
Saanichton, BC
Canada V8M 2A5
Tel: 1-250-652-7100
For technical support:
Global-PMC-Tech-support@schneider-electric.com
(00) + 1 250 544 3010
Contact your local Schneider Electric sales representative
for assistance or go to
www.powerlogic.com

ION, ION Enterprise, Modbus, Modicon, PowerLogic and Schneider Electric are trademarks
or registered trademarks of Schneider Electric in France, the USA and other countries. Other
trademarks used are the property of their respective owners.
Electrical equipment should be installed, operated, serviced, and maintained only by qualified
personnel. No responsibility is assumed by Schneider Electric for any consequences arising
out of the use of this material.
2010 Schneider Electric. All rights reserved.

New Features in ION Enterprise 6.0 SP1

Whats New in ION Enterprise 6.0 Service Pack 1

New Features in ION Enterprise 6.0 SP1


The new features added to ION Enterprise 6.0 service pack 1 are outlined in the
following sections.

New Device Support in ION Enterprise 6.0 SP1


Support for the following devices has been added in ION Enterprise 6.0
service pack 1: EM5600, PM1200 and DM6200.

NOTE
The EM5600 is also sold as the E5600.

To find out if these device are available in your area, please contact your
Schneider Electric sales representative.
Supported communications options for these devices are either a direct serial
connection or a serial connection through an ethernet gateway communicating via
ModbusRTU protocol, using the onboard RS-485 port.
The following table outlines ION Enterprise 6.0 SP1 support for these devices:

Support in ION Enterprise

EM5600

PM1200

DM6200

View real-time data from the device in Vista and WebReach

Yes

Yes

Yes

View historical data from the device in Vista and WebReach

Yes

Yes

No

Use Web Reporter to run reports on historical data

Yes

Yes

No

Make real-time data from the device available to an OPC


server through ION Enterprise

Yes

Yes

Yes

Enhanced Report Pack Support


ION Enterprise 6.0 service pack 1 allows custom report packs that use Report
Data Extensions to be installed and made available for use in Web Reporter.
For information on custom report packs, contact your Schneider Electric sales
representative.

Page 2 of 3

2010 Schneider Electric. All rights reserved.

Whats New in ION Enterprise 6.0 Service Pack 1

Errata

Errata
The following sections outline changes to ION Enterprise documentation since the
last release.

Regional Settings Configuration for WebReach and Web


Reporter
The instructions for setting regional formatting for WebReach and Web Reporter in
the Language Support in ION Enterprise technical note have changed. The
updated instructions are as follows:
1. Start Management Console and select Tools > Reporting Configuration
Manager.
2. Select the Regional Formatting tab.
3. Select the setting you want to use for dates, times and numbers from the
Regional setting for formatting dates, times and numbers dropdown list.
4. Select the currency symbol from the Currency Symbol dropdown list.
5. Click OK to save your changes.

NOTE
For desktop applications, use the Microsoft Regional and Language Options dialog box.

For more information on installing language packs, see the Language Support in
ION Enterprise technical note.

Using Reporter on Secondary Server or Client


The Using Reporter on Secondary Server or Client section of the ION Enterprise
Help and ION Enterprise User Guide is no longer accurate. If you need to use
Reporter on a client or secondary server installation, you will need to create the
ION_DsnKeys.reg file manually. Contact Technical Support for assistance.

2010 Schneider Electric. All rights reserved.

Page 3 of 3

Anda mungkin juga menyukai