1. All submerged parts & hull of seaplane is sprayed with liquid lanoline upto height of above water
line
(a) 1 Feet
(b) 2 Feet *
(c) 1 meter
(d) 2 meter
2. Mark the correct statements
a)Steel wool is used on Al-alloy for corrosion removal
b)Clad-Al can be cleaned by mechanical method
c)Trichloroethylene is used for removal of grease *
d)All of the above
3. Evidence of surface corrosion and extent of pitting should be tested by
(a) Hardness testing
(b) Impact testing
(c) Probing with a fine needle*
(d) None of these
4. Exhaust of Aero-engine made of stainless formed ________________ due to high temperature
(a) Crevice corrosion
(b) Electrolytic corrosion
(c) Inter-granular corrosion *
(d) Stress corrosion
5. Which type of corrosion is occurred in mounting bolts of engine and wings ?
(a) Inter-granular corrosion
(b) Stress corrosion
(c) Concentrating cell corrosion
(d) Fettling corrosion *
6. Heated section checked with magnet for corrosion detection, basically that indicate their relative
(a) Conductivity of part
(b) Permeability of part*
(c) both (a) and (b)
(d) None of these
7. Which is most suitable condition for storage of Aircraft part?
(a) Less than 60% humidity *
(b) Equal to 60% humidity
(c) More than 60% humidity
(d) None of these
pg. 1
pg. 2
pg. 3
pg. 4
pg. 5
pg. 6
pg. 7
pg. 8
pg. 9
pg. 10