7. HVAC System
a. Design drawing of energy efficient HVAC system showing actual position of each component in the blue print like
Air handling unit, location of Outdoor Air Intakes and Exhaust, Ducting, Air flow control damper, fire damper and
machine room if required etc
8. Video Conferencing
a. Design a HD video conferencing system suitable for real-time interactive communication. Actual position
each component like Definition Video Conferencing Codec, Eagle Eye 1080 Camera and license, Microphone
array, presentation sharing to remote sites, Infrared Remote control & standard cables should be shown in
the drawings.
9. Public Address system.
The bidder should design a efficient public address system (PA system) showing exact position of each component
like microphone, amplifier and loudspeakers in the blue print.
10. Water Supply System
The bidder should design a efficient water supply system showing exact position of each component like type & size
of pump, pump room, pump motor, electrical panel, service line etc. in the blue print.
11. Computer Network, Data Centre including high speed internet service.
The bidder should design a efficient computer network including a Data Centre with networking for storage of
electronic copies of all documents created from admission to discharge of a patient with electronic reports, usually
clinical testing or billing information, into a single electronic folder to reduce labour, eliminate lost files and loose
sheets, improve access to authorized users, increase security and provide documentation for claims more quickly
showing exact position of each component in the blue print.
12. Mortuary Cooler
a. The bidder should design a suitable, energy efficient mortuary cooler.as per MCI Norms.
13. Lightning Conductor installation.
The bidder should design a suitable lightning conductor to save the installation from lightning. Drawing should show
the actual location of air terminal, earth pits etc.
14. Solar Water heating system
The bidder should design a suitable capacity solar water heating system showing actual position of different
component like collector, cold water tank, hot water distribution etc. in the blue print.
15. Telecommunications service
The bidder should design a suitable capacity telecommunication / EPABX system showing actual position of all
equipment such as telephone with intercom for the use of Drs, nurses on duties floor wise in the blue print.
16. IBMS & IT:
The objective of this report is to give an overview of services designed for the proposed Hospitals. The scope of our
design is in the areas of:
Local Area Network (LAN) Wireless Network Access
Telephone
Closed Circuit Television (CCTV)
Access Control
Servers & Data Storage
Data Security
Broad concept of services:
The services systems for the project have to be conceptualized based on existing experience and acceptable international design
standards. Effort shall be made to conceal all services and still provide access to these for accommodating changes in the future.
Conservation of energy, optimization of resources, eco-friendliness and state of the art technology shall be the key
factors in the design concept to ensure least downtime and reduce maintenance problems. Every effort shall be
made to design, layout and install equipment in locations that will tend to encourage routine preventive
maintenance by providing easy access for operation personnel. Manual isolation will be provided to enable servicing,
expansion or renovation of any part of the system without interrupting the services in adjacent areas.
17. Electrical land scaping both internal and external illumination.
Special lighting fixture with color LED lighting may be used in the portico, waiting areas etc for beautification.
Special light fixtures such as bollard, post top lanterns, path/road lights with octagonal steel pole etc. shall be used
to illuminate landscaping areas & internal roads.
3
4
6
7
9
10
11
STANDARDS
(Codes of Practice / Guide )
IS : 732 1989 Revision - 3
TITLES
The Transformers shall be protected on the HT side of the consumer, by 11 KV Circuit Breakers i.e. VCB (Vacuum
Circuit Breaker) with necessary metering and protection.