Import/Export 2 Africa
Fax
+27 12 6634224
Website
www.linkworld.co.za
E-mail
sales@linkworld.co.za
support@linkworld.co.za
Address
32 Kersieboom Crescent
Swartkop Ext 4
Centurion
South Africa
0046
SH-2200
UMTS Indoor Pico Repeater
Page 1 / 4
How to Adjust the Operating Band:
1. Plug in the power cable (), and switch on the SH. ()
2
Power Switch
Reset Button
1 DC Power Plug
RF Connector
2. Locate the keypad and the digital display panel in the front shown as below.
A B
D I
F G H
3. You have to unlock the band shifting function first. Press the ‘+’ (G) button
and remain unleashed, then press the ‘-’ (H) button for 3 times. The repeater
will give a beep sound which means unlock is successful.
Page 2 / 4
4. Press the ‘F’ button (F) several times to switch to the band mode. (Band
mode LED (C) illuminating) The current band number will be displayed in
the LED display. (I)
5. Press the ‘+’ key (G) and the ‘-‘ key (H) to select the band number you need.
6. Type-A model can choose from band 01 to band 11, and Type-B model can
choose from band 01 to band 10. Please refer to the frequency table in
the next page.
7. Once you’ve selected the band number you need, you can press the reset
button to restart the repeater.
8. Done.
NOTE:
If you just leave it after adjustment, the band shifting function will
also be locked up again if there is not any operation with the
keypad within 5 minutes.
Page 3 / 4
Coiler SH-2200
Band Frequency Table
Page 4 / 4