Table of Contents
JDSU PTN Test Solutions and Examples ................................................................................ 3
ONT Optical Network Tester ...................................................................................................... 4
T-BERD 8000 Integrated Field Application Tester .......................................................... 6
T-BERD 6000A and 8000 Multi-Service Application Module (MSAM) ........................ 7
T-BERD 5800 Handheld Network Tester ................................................................................. 8
HST-3000 Ethernet Handheld Tester ....................................................................................... 9
SmartClass Ethernet .................................................................................................................... 10
Fiber Inspection, Cleaning and Test Solutions ................................................................. 10
Power Measurement and Fiber Identification Solutions ............................................. 11
OTDR and Optical Power Measurement Solutions ......................................................... 11
Test Example 1: End-to-End MPLS-TP Flow and OAM Verification .................................. 12
Test Example 2: MPLS-TP Flow Real-Time Network Monitoring ....................................... 13
Test Example 3: Ensure Accurate Time Synchronization Verification for 1588v2
Networks ........................................................................................................................................... 13
Test Example 4: PTN One-Way Latency Test ........................................................................... 14
Test Example 5: Synchronous Ethernet Clock Synchronization Test ............................... 15
(7). HST-3000
PTN Features
ONT-503/506 ModuleE+Jitter-E
The precision 1310/1550 nm jitter and wander function is the industrys only
solution that meets Annexes VII and VIII of ITU-T O.172 and that can be calibrated,
received, or sent with Golden TX. Detailed charting ensures the precision applied
by each speed. Provides 15 mUI jitter measurement accuracy.
Supports jitter and wander testing for 1/10.3 GE Sync-E, OTU1e, and OTU2e, and
provides G.8262 testing templates.
Includes CC64 kHz, 1.5/2/6.3/10 MHz, E1/DS1, and 1 pps signal wander characteristics (TDEV, MTIE), wander tolerance, a wander transmission test function,
the industrys only wander generation feature with noise modulation, and a corresponding G.8261 test template to satisfy the needs of various clock tests for PTN
wireless backhaul.
Includes a round-trip-delay (RTD) testing function.
The industrys leading switching test function supports event triggering on multiple
ODU and customer levels. Includes optional parallel and multi-trigger sources.
Provides the industrys leading 64 VC-4, 192 VC-3, and STM16/OC-48 full-rate
multi-channel test function, and supports OTU1 and OTU2 for each ODU particle
mapping SDH/SONET load multi-channel testing.
OTN scheduling functions include ODU0/ODU1 to OTU2 single-level or
multilevel scheduling, support for ODUFlex, client signal mapping, and multichannel OTN. Fully supports the latest G.709/2009 standards.
Fully supports two online test modes: transparent pass-through and enhanced
penetration. Includes SONET/SDH and OTN online monitoring and on-line
warning/error insertion, cost overrides.
Ordering Information
ONT-506/503 Optical Network Tester
Order Number
3062/01
3075/01
3061/92.05
3061/92.10
3061/90.76
3061/90.75
3061/90.70
3061/90.78
3061/90.67
3061/90.66
3061/90.68
3061/90.69
Software options
Order Number
3061/93.47
3061/93.43
3061/93.34
3061/93.36
3061/93.49
3061/93.57
3061/93.95
3061/93.97
3061/93.92
Wander2.5/2.7G Expert
3061/93.89
3061/93.96
3061/90.74
3061/93.63
PTN Features
High precision 1310/1550 nm jitter and wander features, fully compliant with
the MTS-8000 Transport Module ITU-T O.172 Annexes VII and VIII.
Includes functions for E1/DS1 signal jitter, wander characteristics (TDEV and
MTIE), wander tolerance, wander transmission testing, and a wander-generation feature modulated with corresponding noise to meet the need for clock
testing for PTN wireless backhaul.
Advanced APS switching time test and a round-trip-delay (RTD) test feature.
Provides the industrys most complete 10 Mbps-10 GE Layer 1-4 Ethernet
testing with RFC 2544, VLAN, Q-in-Q, VPLS, MPLS, multi-stream, and full
support for the ITU-T Y.1564 standard.
Please contact your JDSU representative for ordering information.
Applications
Tests and troubleshoots converged Ethernet/IP backhaul for 10 Mbps to 10 G
interfaces and captures and analyzes packets.
Tests Layers 1-3 Ethernet/IP SLAs with an automated, enhanced RFC 2544/
SAMComplete per ITU-T Y.1564.
Tests TDM/PDH to SONET/SDH at OC-3/STM-1 to OC-192/STM-64,
including service-disruption measurements and path-overhead (POH) capture
with triggers.
Enables installation and maintenance of OTN networks up to 11.1 G and
includes an interface with ODU-0 support for Ethernet client interfaces.
Validates network synchronization for quality of experience on mobile applications.
Emulates a 1588v2 master clock/slave recovery to ensure proper point-to-point
(PTP) message propagation and to verify packet-delay variation (PDV).
Verifies accurate SyncE frequency synchronization and Ethernet synchronization message channel (ESMC) message propagation.
Ready for packet transport networks using MPLS-TP.
Supports J-Complete, an exclusive suite of automated test tools from JDSU.
Supports SFP and XFP pluggable optics including 50 GHz C-band tunable
XFPs
Please contact your JDSU representative for ordering information.
Applications
Six T-BERD 5800 configurations:
Single- and dual-port Ethernet versions
With or without TDM/PDH interfaces
Fully loaded TDM/PDH to 10 GE, SONET, and SDH
Layer 1-3 Ethernet/IP SLA verification with Class of Service testing that
includes automated, enhanced RFC 2544 tests.
Support for emerging Ethernet synchronization testing including 1588v2 and
SyncE verification.
BER testing up to OC192/STM-64, service disruption, and circuit monitoring
on TDM/PDH/SONET/SDH interfaces.
Supports PTN evolution with MPLS-TP technology.
Supports the J-Complete automated suite of test applications.
Please contact your JDSU representative for ordering information.
PTN Features
Order Number
HST3000-NG2
HST3000-ETH
HST3000-OPTETH
HST3000S-IP
HST3000-MSTR
CC-120101
SmartClass Ethernet
The SmartClass Ethernet product is an easy to use, cost-effective testing solution
for basic physical layer cable testing, Layers 2/3 traffic generation, and full RFC
2544 testing. The rugged, battery operated, application-specific test tool lets
field technicians turn-up Ethernet and IP services by running an RFC 2544
test or by following a set of methods and procedures. The SmartClass product
comes in two major configurations, one a loopback-only device and the other
featuring full traffic generation.
Applications
SmartClass Ethernet
Ordering Information
Product Description
Order Number
Fiber Essentials Tool Kit: Dual-mag (200/400X) FBP probe microscope and tips, FIT-HP2-60-P4
inspection and test system with 400X PCM, FFL-050 visual fault locator, cleaning tools, utility
carrier, carrying case.
FIT-S205-PRO
Inspection Kit: Dual mag (200/400X)FBP probe microscope and tips, HD2 Display with 200x PCM
and adaptors, case
Utility Carrier System for FBP-SE05
Digital PASS/FAIL Analysis kit: P5000i, FiberChekPRO Software, tips and Case
Digital PASS/FAIL Analysis & Test kit: P5000i, MP-60 w/ FiberChekPRO, tips, adaptors and Case
Visual fault locator (compact)
Visual fault locator (ruggedized) with 1.25 mm adapter
Fiber Field Cleaning Kit
FBP-SE05
FBPP-UC2
FBP-SD101
FBP-SD103
FFL-050
FFL-100
FCR-CLN-01
10
Order Number
2303/11
2277/40
2277/41
FI-60
Product Description
Order Number
EM2000T
E4126LM
E4126MA
E4126FCOMP-MA
E41OTDRLS
E4OTDRPM
2301/01
FBP-MTS-101
11
MPLS-TP Provider A
Customer service
(such as Ethernet)
MPLS-TP Provider B
Ca1a
pa1a
MPLS-TP
FW
Ca1a
Cb1b
Ca2a
MPLS-TP
LSP
Ca2a
MPLS-TP
Segment layer
Mark 14
OAL
OAM
Mark 13
OAL
OAL
ACH
ACH
OAM
OAM
Mark 14
LEP
CAL
OAM
Mark 13
LEP
OAL
ACH
OAM
Mark 14
LEP
PW
CAL
OAM
Mark 13
LEP
PW
OAL
ACH
OAM
and the instrument will display flow (bandwidth utilization or CIR), packet loss
(FL), round-trip delay (FD), the speed deviation (FDV), and other key indicators
as well as MPLS-TP header information. Using this mode, you can conduct OAM
generation and validation and analyze OAM control layer flow during operation
maintenance or troubleshooting. CCM can be used to verify the link connection,
and loopback/link tracking can be used to determine the fault isolation.
12
13
TDM
TDM
CE
Ethernet
Ethernet
network
NTE
IWF
Main
NTE
Ethernet network
PTP information
Primary reference
source
MSAM1588v2 Slave
RS-232USB
Adapter
1PPS lnput
BNC
Adapter
AC
Test
lnterface
External GPS Rx
Network
14
Jitter/Wander
Generation
Jitter
Jitter-free
SyncE
Jitter measurement
Wander
Reference signal
SyncE
Wander measurement
Jitter/Wander
Tolerance
Jitter/Wander
Transfer
with Jitter
with Jitter
SyncE
SyncE
Event detection
Reference signal
Jitter measurement
Reference signal
With Wander
BITS
With Wander
SyncE
SyncE
Event detection
Wander measurement
15
228 3762
9216
latin america
tel : +1 954 688
fax : +1 954 345
5660
4668
asia pacific
tel : +852 2892
fax : +852 2892
0990
0770
emea
tel : +49
fax : +49
www.jdsu.com/test
7121 86 2222
7121 86 1222
Product specifications and descriptions in this document subject to change without notice. 2012 JDS Uniphase Corporation 30173065 000 0112 PTN-NETWORK.BR.NSD.TM.AE January 2012