Anda di halaman 1dari 3

Homemade Electroscope

Have you ever tried to shut the car door on a warm, dry day and experienced a
small shock of electricity? How about rubbing your shoes along a carpeted floor to
shock your friends or family members? Have you made your hair stand up by
rubbing it with a balloon?
Youre able to do all of these things because of st at ic elect ricit ya build-up of an
electric charge on a surface. Static electricity can be caused by bringing two
materials together or separating them. The shock released when the charged
surface touches something else is caused by elect rons leaping across to the
surface without a charge. Let's learn how to build a homemade electroscope so that
we can see this in action!

Problem
How do we build an elect roscope (a device that can detect electrical charges)?

Mat erials
Clear glass jar
Jar lid or piece of plastic large enough to cover the opening of the jar
Electrical tape
Copper wire, 14 g or thicker
Straw
Scissors
Glue gun
Aluminum foil or gold leaf
Vinyl record
Rubber soled shoe
Carpet
Balloon
Any other material you want to test!

Procedure:
1. Perform this experiment on a dry day! The experiment might not work if it is humid or raining. Why do you
think this is important?
2. Use the scissors to cut a two-inch long piece of straw.
3. Have an adult punch a hole through the center of the jar lid or piece of plastic big enough to fit the straw
through.
4 . Insert the straw into the hole for your lid. Hot glue the straw so it is securely fastened to the lid.
5. Cut a 10-inch piece of copper wire.
6. Twist the top 4 inches into a circle or spiral to create some surface area. If were trying to test the presence
of an electric charge, why do you think having a larger surface area better? Why is thicker wire better?
7. Insert the straight end of the wire through the straw and create a hook about 1 inch long.
8. Hang two small pieces of foil or gold leaf on the hook. Make sure they are in contact. Why do you think were
using two pieces of metal as opposed to one? What do you think the two pieces of metal are there to do?
9. Place the hooked end of the metal into the jar and twist on or tape the lid to the jar.
10. Now its time to give our materials a static charge! Rub each of your materials vigorously with your hand or a
piece of wool. Can you explain how this helps give each object an electric charge?
11. After you give each of your objects a charge, bring each object near the coiled wire on your electroscope.
Be sure to record your observations!
Ext ra:
Try rubbing the balloon on your hair.
Try rubbing your shoes on the carpet and then bring the electroscope close to the sole of your shoe.
Rub the vinyl with your hands.

Result s
The materials with the greatest ability to hold charge will cause the pieces of foil in the electroscope to move the
most.

Why?
We made sure to perform this experiment on a dry day because dry days tend to produce much better results.
Excess moisture in the air will prevent a charge from building up because electricity is able to escape into humid
air, or air that has a lot of water vapor in it.
Lets think about why we constructed our electroscope the way we did. Well start with why we coiled the copper
wire: we did this because we wanted to create a lot of surface area for elect rost at ic induct ionthe transfer
of electrons from one surface to another without touching. The more area there is for electrons from our object to
enter the wire, the faster energy will flow down into our electroscope. This is also why thicker wire is better: the
bigger the radius of the wire, the more room electrons have to move.
It is necessary to have two pieces of foil or gold leaf touching so that they can repel each other when the
electrons flow into them. Negative charges repel each other, so there must be two negatively charged pieces of
foil for us to be able to visualiz e what is happening! Of course, electron transfer is still happening if there is one
piece of metal, but we cant see the particles themselveswe need to be able to see something that they do.
Electrons are transferred from one surface to another by physical contact, which is why it is important to rub the
test materials with your hand or a piece of wool. By rubbing vigorously, you are transferring electrons from your
hand or wool to the material youre testing. Your hand and the wool become positively charged, while the test
material becomes negatively charged. The electrons, which are negatively charged, can then travel through the
copper wire of the electroscope down to the pieces of foil, which both become negatively charged. These
negative charges push against each other, causing the pieces of foil to repel. Remember, while opposites attract,
a negative-negative or positive-positive combinations of charges always repel!

Anda mungkin juga menyukai