Helped by this document, I will explain you the clear differences make ABC compressors a
better choice than our competitor B&M.
DESIGN:
B&M:
ABC:
Advantages:
PRODUCTION:
B&M:
ABC:
Advantages:
CYLINDERS TYPE:
B&M:
In the V type compressors, 2nd and 3rd stages always tandem cylinders.
ABC:
just one out of the 9 compressors in our range (the smallest one) has tandem
cylinder. The rest have just double acting ones.
Advantages:
- Double acting cylinders use both movements of the stroke to compress the
air they are > much bigger efficiency.
- Durability of the parts is more than 50% superior.
NUMBER OF STAGES:
B&M:
ABC:
For almost all the flow requirements, we have the chance to let the customer
choose between 3 and 4 stage compressors. In our range we have; four 3 stage
models and five 4 stage models.
Advantages:
B&MTERCOOLERS:
B&M:
ABC:
Advantages:
SKID:
B&M:
ABC:
Due to the lack of vibration, we are able to assembly the compressor and all
the peripherals in a single skid.
Advantages:
-We need a smaller floor area. Although B&M claim to have a smaller area, if
we consider the motor compressor package and the rest of peripherals, we
occupy less area at site.
- The whole package is tested in running conditions, producing 40 bar air
during 72 hours. Once we give the OK, we do not need to disassemble the
machine and can send it directly to the customers site.
- Plug and Play commissioning. We do not need to assembly anything at
customers site.
- In case customer needs to relocate the compressor, it is easier to do it.
ABC:
Besides PET and low pressure compressors, we produce Oil & Gas compressors
for Petrochemical, waste treatment, industrial gas, Natural gas cogeneration
activities.
Advantages:
ENERGY SAVING:
Although all compressor manufacturers say in our catalogues, that each one of us produce the
most efficient compressors, ABC is the only one proving this fact with energy audits. During the
last years we did several energy audits in our customers sites comparing ABC compressors
with the competitors ones. We have always compared same size compressors, which were
acquired in similar years and are running in the same climate conditions and altitude. It is
important to mention that these audits are done with customer technicians as witnesses,
taking their own notes, and always using ISO certificated tools.
So, as it is obvious, we have a big interest in these audits because all of them have being
favorable to ABC. Moreover, as the only thing that all compressor manufacturers agree is that
once a complete blowing line is running, the compressor consumes nearly the 80% of the
energy, this becomes an essential issue for us.
Please have in mind that we are arranging an energy audit showroad in Pakistan for first
quarter of 2014. As you already have ABC and competition compressors we would be very glad
to audit them and show and prove how what we is just the truth. More advance in time, we
will contact you to arrange the mentioned audits.