01
Date
2014-04-30
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website:
http://www.huawei.com
Email:
support@huawei.com
Issue 01 (2014-04-30)
WCDMA RAN
Adaptive RACH Feature Parameter Description
Contents
Contents
1 Introduction....................................................................................................................................1
1.1 Scope..............................................................................................................................................................................1
1.2 Intended Audience..........................................................................................................................................................1
1.3 Change History...............................................................................................................................................................1
1.4 Differences Between Base Station Types.......................................................................................................................2
2 Overview.........................................................................................................................................3
2.1 Introduction....................................................................................................................................................................3
2.2 Benefits...........................................................................................................................................................................3
3 Technical Description...................................................................................................................4
4 Related Features.............................................................................................................................6
5 Network Impact.............................................................................................................................7
6 Engineering Guidelines...............................................................................................................8
6.1 When to Use Adaptive RACH........................................................................................................................................8
6.2 Required Information.....................................................................................................................................................8
6.3 Feature Deployment.......................................................................................................................................................8
6.3.1 Requirements...............................................................................................................................................................9
6.3.2 Data Preparation..........................................................................................................................................................9
6.3.3 Activation..................................................................................................................................................................16
6.3.4 Activation Observation..............................................................................................................................................19
6.3.5 Deactivation...............................................................................................................................................................19
6.4 Performance Monitoring...............................................................................................................................................20
6.5 Parameter Optimization................................................................................................................................................21
6.6 Troubleshooting............................................................................................................................................................21
7 Parameters.....................................................................................................................................22
8 Counters........................................................................................................................................46
9 Glossary.........................................................................................................................................47
10 Reference Documents...............................................................................................................48
Issue 01 (2014-04-30)
ii
WCDMA RAN
Adaptive RACH Feature Parameter Description
1 Introduction
Introduction
1.1 Scope
This document describes WRFD-151201 Adaptive RACH feature, including its technical
principles, related features, network impact, and engineering guidelines.
This document applies to the following NE types.
NE Type
NE Model
RNC
BSC6900, BSC6910
NodeB
Macro
Micro
BTS3803E, BTS3902E
LampSite
DBS3900
WCDMA RAN
Adaptive RACH Feature Parameter Description
1 Introduction
Feature change
Changes in features of a specific product version
Editorial change
Changes in wording or addition of information that was not described in the earlier version
RAN16.0 01(2014-04-30)
This issue includes the following changes.
Change
Type
Change Description
Parameter Change
Feature
change
None
None
Editorial
change
None
WRFD151201
Descripti
on
Adaptive
RACH
Supported by
Controller(Y/N/NA)
BSC690
0
BSC691
0
Supporte
d by
Macro
(Y/N/
NA)
Supported by Micro
(Y/N/NA)
BTS380
3E
BTS390
2E
LampSit
e
NOTE
Y indicates that a feature is supported; N indicates that a feature is not supported; NA indicates that an NE is
not involved, that is, a feature does not require the support of the NE.
Issue 01 (2014-04-30)
WCDMA RAN
Adaptive RACH Feature Parameter Description
2 Overview
Overview
2.1 Introduction
When a large number of UEs simultaneously initiate a random access procedure in a cell, the
received total wideband power (RTWP) of this cell becomes extremely high. To reduce the
RTWP in this scenario, Huawei offers Adaptive RACH. Adaptive RACH enables the RNC to
dynamically adjust the settings of random access parameters for a cell based on the uplink power
load and number of acknowledged random accesses in a specified period of time. This feature
can reduce a cell's RTWP and increase its capacity.
2.2 Benefits
When the RTWP of a cell is high due to a large number of random accesses, Adaptive RACH
helps reduce the RTWP by 0.3 dB to 0.5 dB or improve the HSUPA throughput by about 5%.
Issue 01 (2014-04-30)
WCDMA RAN
Adaptive RACH Feature Parameter Description
3 Technical Description
Technical Description
When the RTWP of a cell is high due to a large number of random accesses, Adaptive RACH
enables the RNC to dynamically adjust the settings of random access parameters based on the
uplink power load and number of acknowledged random accesses. The RNC broadcasts the new
settings of random access parameters to UEs. The random access parameters include the constant
for calculating the initial transmit power, ramping step for random access preambles, and
maximum number of preamble retransmissions.
The RNC measures the number of acknowledged random accesses in a cell when the
ACK_PRACH_PREAM_MEAS check box under the NBMLdcAlgoSwitch
(BSC6900,BSC6910) parameter in the ADD UCELLALGOSWITCH command is selected.
Adaptive RACH is activated when the ADAPTIVE_RACH and
ACK_PRACH_PREAM_MEAS check boxes under the NBMLdcAlgoSwitch
(BSC6900,BSC6910) parameter in the ADD UCELLALGOSWITCH command are selected.
The RNC dynamically adjusts the settings of the random access parameters as follows:
l
When the cell uplink load is greater than or equal to the value of the OptiStartLoadState
parameter and the number of acknowledged random accesses in a cell is greater than or
equal to the value of the RandomAccessCongestThd(BSC6900,BSC6910) parameter, the
RNC broadcasts the optimized settings of random access parameters (OptiConstantvalue
(BSC6900,BSC6910), OptiPowerRampStep(BSC6900,BSC6910), and
OptiPreambleRetransMax(BSC6900,BSC6910)) to UEs.
When the number of acknowledged random accesses is less than or equal to the value of
the RandomAccessClearThd(BSC6900,BSC6910) parameter, the RNC broadcasts the
original settings of random access parameters (Constantvalue(BSC6900,BSC6910),
PowerRampStep(BSC6900,BSC6910), and PreambleRetransMax(BSC6900,BSC6910))
to UEs.
Compared with the original settings, the optimized settings reduce the value of the constant for
calculating the initial transmit power, lower the ramping step for random access preambles, and
increase the maximum number of preamble retransmissions. Therefore, using the optimized
settings reduces the interference to uplink channels and ultimately reduces the cell RTWP when
the cell uplink load is greater than the value of the OptiStartLoadState parameter and the number
of acknowledged random accesses is greater than the value of the RandomAccessCongestThd
(BSC6900,BSC6910) parameter. When the number of acknowledged random accesses is less
than or equal to the value of the RandomAccessClearThd(BSC6900,BSC6910) parameter, using
the optimized setting increases the delay during random access.
Issue 01 (2014-04-30)
WCDMA RAN
Adaptive RACH Feature Parameter Description
3 Technical Description
For details about the impact of the constant for calculating the initial transmit power, ramping
step for random access preambles, and maximum number of preamble retransmissions on the
random access procedure, see Power Control Feature Parameter Description.
For details about how to determine whether a cell is congested, see Load Control Feature
Parameter Description.
Issue 01 (2014-04-30)
WCDMA RAN
Adaptive RACH Feature Parameter Description
4 Related Features
Related Features
Prerequisite Features
None
Impacted Features
None
Issue 01 (2014-04-30)
WCDMA RAN
Adaptive RACH Feature Parameter Description
5 Network Impact
Network Impact
System Capacity
When the RTWP of a cell is high due to a large number of random accesses, Adaptive RACH
helps reduce the RTWP by 0.3 dB to 0.5 dB or improve the HSUPA throughput by about 5%.
However, Adaptive RACH also increases delay during random access.
Network Performance
None
Issue 01 (2014-04-30)
WCDMA RAN
Adaptive RACH Feature Parameter Description
6 Engineering Guidelines
Engineering Guidelines
The uplink power load is greater than the value of the OptiStartLoadState parameter. This
parameter is set to 50% by default.
VS.MeanRTWP: average RTWP of a cell. This counter is used to calculate the uplink power
load of a cell.
The uplink power load of a cell can be calculated using the following formula: uplink power
load = 1 - (1/RoT). In this formula, the rise over thermal (RoT) equals to the difference
between the RTWP and the background noise. In addition, the RoT needs to be converted
into linear quantities.
WCDMA RAN
Adaptive RACH Feature Parameter Description
6 Engineering Guidelines
6.3.1 Requirements
l
Other NEs
None
License
For details about how to activate the license, see License Management Feature Parameter
Description.
Feature
ID
Feature
Name
License
Control
Item
License
Control
Name
NE
License
Allocation
for Multiple
Operators
Sal
es
Un
it
WRFD-15
1201
Adaptive
RACH
LQW1AR
RES
Adaptive
RACH(per
Cell)
BSC69
00
BSC69
10
License
control items
that cannot be
configured
based on
operators
Cell
Issue 01 (2014-04-30)
WCDMA RAN
Adaptive RACH Feature Parameter Description
Issue 01 (2014-04-30)
6 Engineering Guidelines
Parameter Name
Parameter ID
Setting Notes
Data Source
Optimized Constant
for Initial Transmit
PW Cal
OptiConstantvalue
(BSC6900,BSC6910
)
BSC internal
planning
10
WCDMA RAN
Adaptive RACH Feature Parameter Description
Issue 01 (2014-04-30)
6 Engineering Guidelines
Parameter Name
Parameter ID
Setting Notes
Data Source
Optimized Max
Random Access
Preamble Retrans
OptiPreambleRetransMax
(BSC6900,BSC6910
)
BSC internal
planning
11
WCDMA RAN
Adaptive RACH Feature Parameter Description
Issue 01 (2014-04-30)
6 Engineering Guidelines
Parameter Name
Parameter ID
Setting Notes
Data Source
Optimized Power
Increase Step
OptiPowerRampStep
(BSC6900,BSC6910
)
BSC internal
planning
12
WCDMA RAN
Adaptive RACH Feature Parameter Description
Issue 01 (2014-04-30)
6 Engineering Guidelines
Parameter Name
Parameter ID
Setting Notes
Data Source
Random Access
Resource
Congestion Trigger
Thre
RandomAccessCongestThd
(BSC6900,BSC6910
)
BSC internal
planning
13
WCDMA RAN
Adaptive RACH Feature Parameter Description
Issue 01 (2014-04-30)
6 Engineering Guidelines
Parameter Name
Parameter ID
Setting Notes
Data Source
Random Access
Resource
Congestion Clear
Thre
RandomAccessClearThd
(BSC6900,BSC6910
)
BSC internal
planning
14
WCDMA RAN
Adaptive RACH Feature Parameter Description
Issue 01 (2014-04-30)
6 Engineering Guidelines
Parameter Name
Parameter ID
Setting Notes
Data Source
Optimized Uplink
Power Load State
OptiStartLoadState
(BSC6900,BSC6910
)
BSC internal
planning
15
WCDMA RAN
Adaptive RACH Feature Parameter Description
6 Engineering Guidelines
Parameter Name
Parameter ID
Setting Notes
Data Source
Stop Hysteresis
Duration for
Adaptive RACH
OptiStopHyst
(BSC6900,BSC6910
)
BSC internal
planning
6.3.3 Activation
Activation (Using MML Commands)
Perform the following steps to activate this feature:
Step 1 Run the RNC MML command ADD UCELLLICENSE and select the
ADAPTIVE_RACH_SWITCH check box under the FuncSwitch2 parameter.
Step 2 Run the RNC MML command MOD UCELLALGOSWITCH and select the
ACK_PRACH_PREAM_MEAS and ADAPTIVE_RACH check boxes under the
NBMLdcAlgoSwitch parameter.
Step 3 (Optional) Run the MML command ADD CELLADAPTRACH or MOD
UCELLADAPTRACH and specify the following parameters: Cell ID, Random Access
Resource Congestion Trigger Thre, Random Access Resource Congestion Clear Thre,
Optimized Uplink Power Load State, and Stop Hysteresis Duration for Adaptive RACH.
----End
Issue 01 (2014-04-30)
16
WCDMA RAN
Adaptive RACH Feature Parameter Description
6 Engineering Guidelines
When configuring the Adaptive RACH feature on the CME, perform a single configuration first, and then
perform a batch modification if required. Configure the parameters of a single object before a batch
modification. Perform a batch modification before logging out of the parameter setting interface.
Issue 01 (2014-04-30)
SN
MO
NE
Parameter
Name
Parameter
ID
Configura
ble in CME
Batch
Modificati
on Center
UCELLLIC
ENSE
RNC
Function
Switch2
FuncSwitch
2
(BSC6900,
BSC6910):
ADAPTIVE
_RACH_S
WITCH
Yes
17
WCDMA RAN
Adaptive RACH Feature Parameter Description
6 Engineering Guidelines
SN
MO
NE
Parameter
Name
Parameter
ID
Configura
ble in CME
Batch
Modificati
on Center
UCELLAL
GOSWITC
H
RNC
Switch for
Cell Load
Control
NBMLdcAl
goSwitch
(BSC6900,
BSC6910):
ADAPTIVE
_RACH
Yes
NBMLdcAl
goSwitch
(BSC6900,
BSC6910):
ACK_PRAC
H_PREAM_
MEAS
3 (Optional)
UCELLAD
APTRACH
RNC
Random
Access
Resource
Congestion
Trigger Thr
RandomAcc
essCongestT
hd
(BSC6900,
BSC6910)
Yes
Random
Access
Resource
Congestion
Clear Thr
RandomAcc
essClearThd
(BSC6900,
BSC6910)
Yes
Optimized
Uplink
Power Load
State
OptiStartLo
adState
(BSC6900,
BSC6910)
Yes
Stop
Hysteresis
Duration for
Adaptive
RACH
OptiStopHys
t
(BSC6900,
BSC6910)
Yes
Issue 01 (2014-04-30)
18
WCDMA RAN
Adaptive RACH Feature Parameter Description
6 Engineering Guidelines
6.3.5 Deactivation
Deactivation (Using MML Commands)
Step 1 To deactivate this feature, deselect the ADAPTIVE_RACH and
ACK_PRACH_PREAM_MEAS check boxes under the Switch for Cell Load Control
parameter in the MOD UCELLALGOSWITCH command.
Step 2 Run the RNC MML command MOD UCELLLICENSE and deselect the
ADAPTIVE_RACH_SWITCH check box under the FuncSwitch2 parameter to deactivate the
license controlling this feature.
----End
When configuring the Adaptive RACH feature on the CME, perform a single configuration first, and then
perform a batch modification if required. Configure the parameters of a single object before a batch
modification. Perform a batch modification before logging out of the parameter setting interface.
19
WCDMA RAN
Adaptive RACH Feature Parameter Description
6 Engineering Guidelines
Set parameters on the CME according to the operation sequence in Table 6-2. For instructions
on how to perform the CME single configuration, see CME Single Configuration Operation
Guide.
Step 2 (Optional) Modify objects in batches on the CME. (CME batch modification center)
To modify objects in batches, click
on the CME to start the batch modification wizard. For
instructions on how to perform a batch modification through the CME batch modification center,
press F1 on the wizard interface to obtain online help.
----End
Table 6-2 Configuring the parameter on the CME
SN
MO
NE
Parameter
Name
Parameter
ID
Configura
ble in CME
Batch
Modificati
on Center
UCELLAL
GOSWITC
H
RNC
Switch for
Cell Load
Control
NBMLdcAl
goSwitch
(BSC6900,
BSC6910):
ADAPTIVE
_RACH
Yes
NBMLdcAl
goSwitch
(BSC6900,
BSC6910):
ACK_PRAC
H_PREAM_
MEAS
2
UCELLLIC
ENSE
RNC
Function
Switch2
FuncSwitch
2
(BSC6900,
BSC6910):
ADAPTIVE
_RACH_S
WITCH
Yes
20
WCDMA RAN
Adaptive RACH Feature Parameter Description
6 Engineering Guidelines
6.6 Troubleshooting
For 3900 series base stations configured with a WBBPa board, cells carried on this WBBPa
board do not support this feature. If such a cell is enabled with the Adaptive RACH feature, the
RNC will send an error message (NBAP_ERR_IND_COMM) to the NodeB. In this case, disable
this feature for this cell.
Issue 01 (2014-04-30)
21
WCDMA RAN
Adaptive RACH Feature Parameter Description
7 Parameters
Parameters
NE
MML
Comma
nd
Feature
ID
Feature
Name
Description
NBMLd
cAlgoS
witch
BSC690
0
ADD
UCELL
ALGOS
WITCH
WRFD151203
MOD
UCELL
ALGOS
WITCH
WRFD150231
Campin
g
Strategy
Switch
for Mass
Event
WRFD020106
WRFD150219
WRFD150216
WRFD150217
WRFD150215
WRFD0106100
3
WRFD020102
WRFD140223
WRFD150236
WRFD020101
Issue 01 (2014-04-30)
Load
Reshuffl
ing
RIM
Based
UMTS
Target
Cell
Selectio
n for
LTE
Coverag
e Based
PS
Redirect
ion from
UMTS
to LTE
Load
Based
PS
Redirect
ion from
22
WCDMA RAN
Adaptive RACH Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
Feature
Name
Description
WRFD140226
UMTS
to LTE
WRFD020107
Load
Based
PS
Handov
er from
UMTS
to LTE
alleviates the uplink load by using load-based interfrequency handovers, BE service rate reduction,
uncontrollable real-time service QoS renegotiation,
load-based CS/PS inter-RAT handovers, and AMR
service rate reduction. 6. DL_UU_LDR: Whether to
enable the downlink LDR algorithm. When the
downlink load is heavy in a cell, this algorithm
alleviates the downlink load by using load-based interfrequency handovers, BE service rate reduction,
uncontrollable real-time service QoS renegotiation,
load-based CS/PS inter-RAT handovers, AMR service
rate reduction, and MBMS power restriction. 7.
OLC_EVENTMEAS: Whether to enable OLC event
measurement. 8. CELL_CODE_LDR: Whether to
enable cell code reshuffling algorithm. In the event of
code resource overuse, this algorithm alleviates the code
resource overuse by using BE service rate reduction,
code tree reshuffling, and load-based inter-frequency
handovers. 9. CELL_CREDIT_LDR: Whether to
enable the cell credit reshuffling algorithm. In the event
of cell credit overuse, this algorithm alleviates the credit
overuse by using load-based inter-frequency handovers,
BE service rate reduction, uncontrollable real-time
service QoS renegotiation, and load-based CS/PS interRAT handovers. 10.
UL_INTRA_FREQUENCY_ULB: Whether to enable
RTWP-based intra-frequency load balancing algorithm.
This algorithm adjusts P-CPICH transmit power of a
cell based on the RTWP load to achieve load balancing
between intra-frequency cells. This algorithm
automatically becomes invalid when the load-based
dynamic P-CPICH transmit power adjustment
algorithm (controlled by the
DLLOAD_BASED_PCPICH_PWR_ADJ_SWITCH
switch) takes effect. 11. UL_UU_CLB: Whether to
enable the uplink load-based CLB algorithm. This
algorithm determines whether a cell enters the CLB
state by the uplink load on the air interface. If a cell is
in the CLB state, measurement-based inter-frequency
handovers are triggered periodically to achieve load
balancing between inter-frequency cells. 12.
DL_UU_CLB: Whether to enable the downlink loadbased CLB algorithm. This algorithm determines
whether a cell enters the CLB state by the downlink load
on the air interface. If a cell is in the CLB state,
measurement-based inter-frequency handovers are
triggered periodically to achieve load balancing
WRFD020104
WRFD020105
WRFD020126
WRFD0106120
2
WRFD020129
WRFD010626
WRFD010627
WRFD020103
WRFD010660
WRFD010661
WRFD010662
WRFD010663
WRFD010665
WRFD140102
WRFD0106600
4
WRFD0106160
6
Issue 01 (2014-04-30)
7 Parameters
SRVCC
from
LTE to
UMTS
with PS
Handov
er
HSDPA
Admissi
on
Control
Load
Measure
ment
MOCN
Cell
Resourc
e
Demarc
ation
Load
Based
Dynami
c
Adjustm
ent of
PCPICH
Admissi
on
Control
Fast
Return
from
UMTS
to LTE
23
WCDMA RAN
Adaptive RACH Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
7 Parameters
Feature
ID
Feature
Name
Description
WRFD0106600
2
Overloa
d
Control
WRFD0106600
3
Intra
Frequen
cy Load
Balance
WRFD0106600
1
WRFD0106160
5
WRFD150220
WRFD0106160
1
WRFD0106160
3
WRFD0106160
2
WRFD140217
WRFD0106160
4
WRFD010616
WRFD0106160
8
WRFD140218
Potential
User
Control
Mobility
Between
UMTS
and LTE
Phase 1
HSUPA
Admissi
on
Control
PS
Service
Redirect
ion from
UMTS
to LTE
MBMS
FLC
(Freque
ncy
Layer
Converg
ence)/
FLD
(Freque
ncy
Layer
Dispersi
on)
FACH
Transmi
ssion
Sharing
for
MBMS
Issue 01 (2014-04-30)
24
WCDMA RAN
Adaptive RACH Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
7 Parameters
Feature
Name
Description
Inter
Frequen
cy Load
Balance
CELL_CODE_LDR, CELL_CREDIT_LDR,
UL_INTRA_FREQUENCY_ULB, UL_UU_CLB,
DL_UU_CLB, CELL_CODE_CLB,
CELL_CREDIT_CLB,
DLLOAD_BASED_PCPICH_PWR_ADJ_SWITCH,
ADAPTIVE_RACH,
ACK_PRACH_PREAM_MEAS,
CAMPING_STRATEGY_SWITCH
MBMS
Phase 2
MBMS
over Iur
Dynami
c Power
Estimati
on for
MTCH
MSCH
Scheduli
ng
MBMS
Channel
Audienc
e Rating
Statistic
s
CS
Fallback
Guarant
ee for
LTE
Emerge
ncy
Calls
Unit: None
Actual Value Range: INTRA_FREQUENCY_LDB,
PUC, UL_UU_LDR, DL_UU_LDR, UL_UU_OLC,
DL_UU_OLC, OLC_EVENTMEAS,
CELL_CODE_LDR, CELL_CREDIT_LDR,
UL_INTRA_FREQUENCY_ULB, UL_UU_CLB,
DL_UU_CLB, CELL_CODE_CLB,
CELL_CREDIT_CLB,
DLLOAD_BASED_PCPICH_PWR_ADJ_SWITCH,
ADAPTIVE_RACH,
ACK_PRACH_PREAM_MEAS,
CAMPING_STRATEGY_SWITCH
Default Value: INTRA_FREQUENCY_LDB:0,PUC:
0,UL_UU_LDR:0,DL_UU_LDR:0,UL_UU_OLC:
0,DL_UU_OLC:0,OLC_EVENTMEAS:
0,CELL_CODE_LDR:0,CELL_CREDIT_LDR:
0,UL_INTRA_FREQUENCY_ULB:0,UL_UU_CLB:
0,DL_UU_CLB:0,CELL_CODE_CLB:
0,CELL_CREDIT_CLB:
0,DLLOAD_BASED_PCPICH_PWR_ADJ_SWITC
H:0,ADAPTIVE_RACH:
0,ACK_PRACH_PREAM_MEAS:
0,CAMPING_STRATEGY_SWITCH:0
InterFrequen
cy
Neighbo
ring Cell
Selectio
n for
MBMS
PTP
Users
Streami
ng
Service
on
MBMS
Issue 01 (2014-04-30)
25
WCDMA RAN
Adaptive RACH Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
7 Parameters
Feature
Name
Description
MBMS
P2P over
HSDPA
MBMS
Admissi
on
Enhance
ment
MBMS
Enhance
d
Broadca
st Mode
MBMS
Transpo
rt
Resourc
e
Manage
ment
Coverag
e Based
PS
Handov
er from
UMTS
to LTE
MBMS
Broadca
st Mode
MBMS
Load
Control
MBMS
Admissi
on
Control
InterFrequen
cy Load
Balancin
g Based
on
Configu
rable
Issue 01 (2014-04-30)
26
WCDMA RAN
Adaptive RACH Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
7 Parameters
Feature
Name
Description
Load
Threshol
d
MBMS
Soft/
Selectiv
e
Combini
ng
MBMS
Introduc
tion
Package
16/32/64
/
128Kbp
s
Channel
Rate on
MBMS
ServiceBased
PS
Handov
er from
UMTS
to LTE
Issue 01 (2014-04-30)
27
WCDMA RAN
Adaptive RACH Feature Parameter Description
7 Parameters
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
Feature
Name
Description
NBMLd
cAlgoS
witch
BSC691
0
ADD
UCELL
ALGOS
WITCH
WRFD151203
Campin
g
Strategy
Switch
for Mass
Event
MOD
UCELL
ALGOS
WITCH
WRFD020106
WRFD150231
WRFD150219
WRFD150216
WRFD150217
WRFD150215
WRFD0106100
3
WRFD020102
WRFD140223
WRFD150236
WRFD020101
WRFD140226
WRFD020107
WRFD020104
WRFD020105
WRFD020126
WRFD0106120
2
WRFD020129
Issue 01 (2014-04-30)
Load
Reshuffl
ing
RIM
Based
UMTS
Target
Cell
Selectio
n for
LTE
Coverag
e Based
PS
Redirect
ion from
UMTS
to LTE
Load
Based
PS
Redirect
ion from
UMTS
to LTE
Load
Based
PS
Handov
er from
UMTS
to LTE
SRVCC
from
LTE to
UMTS
with PS
Handov
er
28
WCDMA RAN
Adaptive RACH Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
Feature
Name
Description
WRFD010626
HSDPA
Admissi
on
Control
WRFD010627
WRFD020103
WRFD010660
WRFD010661
WRFD010662
Load
Measure
ment
MOCN
Cell
Resourc
e
Demarc
ation
WRFD140102
Load
Based
Dynami
c
Adjustm
ent of
PCPICH
WRFD0106600
4
Admissi
on
Control
WRFD0106160
6
Fast
Return
from
UMTS
to LTE
WRFD010663
WRFD010665
WRFD0106600
2
WRFD0106600
3
Overloa
d
Control
WRFD0106600
1
Intra
Frequen
cy Load
Balance
WRFD0106160
5
Potential
User
Control
WRFD150220
Mobility
Between
UMTS
and LTE
Phase 1
WRFD0106160
1
Issue 01 (2014-04-30)
7 Parameters
29
WCDMA RAN
Adaptive RACH Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
7 Parameters
Feature
ID
Feature
Name
Description
WRFD0106160
3
HSUPA
Admissi
on
Control
adjustment algorithm. This algorithm adjusts the PCPICH transmit power by the downlink non-HSPA
power load to reduce the downlink non-HSPA power
load. If this algorithm takes effect, other enabled
algorithms for intra-frequency load balancing (based on
TCP or RTWP) automatically become invalid. 16.
ADAPTIVE_RACH: Function switch for the adaptive
RACH feature. When this switch is turned on, this
feature is activated. In this case, the RNC adjusts the
random access parameters based on the random access
state and on the uplink power load of the target cell.
When this switch is turned off, this feature is
deactivated. 17. ACK_PRACH_PREAM_MEAS:
Whether to measure the number of acknowledged
PRACH preambles. When this switch is turned on, the
RNC measures the number of acknowledged PRACH
preambles. When this switch is turned off, the RNC does
not measure the number of acknowledged PRACH
preambles. 18. CAMPING_STRATEGY_SWITCH:
Whether to enable the camping policy switching
function when traffic is heavy. This is a function switch
for the function. When the switch is turned on, the
camping policy switching function is enabled if traffic
is heavy in the entire network. Then, the target cell is no
longer a preferred camping cell for the UE in question,
but a random camping cell.
WRFD0106160
2
WRFD140217
WRFD0106160
4
WRFD010616
WRFD0106160
8
WRFD140218
PS
Service
Redirect
ion from
UMTS
to LTE
MBMS
FLC
(Freque
ncy
Layer
Converg
ence)/
FLD
(Freque
ncy
Layer
Dispersi
on)
FACH
Transmi
ssion
Sharing
for
MBMS
Inter
Frequen
cy Load
Balance
MBMS
Phase 2
MBMS
over Iur
Dynami
c Power
Estimati
on for
MTCH
MSCH
Scheduli
ng
Issue 01 (2014-04-30)
30
WCDMA RAN
Adaptive RACH Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
7 Parameters
Feature
Name
Description
MBMS
Channel
Audienc
e Rating
Statistic
s
ADAPTIVE_RACH,
ACK_PRACH_PREAM_MEAS,
CAMPING_STRATEGY_SWITCH
CS
Fallback
Guarant
ee for
LTE
Emerge
ncy
Calls
InterFrequen
cy
Neighbo
ring Cell
Selectio
n for
MBMS
PTP
Users
Streami
ng
Service
on
MBMS
MBMS
P2P over
HSDPA
MBMS
Admissi
on
Enhance
ment
MBMS
Enhance
d
Broadca
st Mode
MBMS
Transpo
rt
Issue 01 (2014-04-30)
31
WCDMA RAN
Adaptive RACH Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
7 Parameters
Feature
Name
Description
Resourc
e
Manage
ment
Coverag
e Based
PS
Handov
er from
UMTS
to LTE
MBMS
Broadca
st Mode
MBMS
Load
Control
MBMS
Admissi
on
Control
InterFrequen
cy Load
Balancin
g Based
on
Configu
rable
Load
Threshol
d
MBMS
Soft/
Selectiv
e
Combini
ng
MBMS
Introduc
tion
Package
16/32/64
/
128Kbp
Issue 01 (2014-04-30)
32
WCDMA RAN
Adaptive RACH Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
7 Parameters
Feature
Name
Description
s
Channel
Rate on
MBMS
ServiceBased
PS
Handov
er from
UMTS
to LTE
Random
AccessC
ongestT
hd
BSC690
0
ADD
UCELL
ADAPT
RACH
WRFD151201
Adaptiv
e RACH
MOD
UCELL
ADAPT
RACH
Random
AccessC
ongestT
hd
BSC691
0
ADD
UCELL
ADAPT
RACH
WRFD151201
Adaptiv
e RACH
MOD
UCELL
ADAPT
RACH
OptiCon
stantval
ue
BSC690
0
ADD
UCELL
ADAPT
RACH
MOD
UCELL
ADAPT
RACH
WRFD151201
Adaptiv
e RACH
Issue 01 (2014-04-30)
33
WCDMA RAN
Adaptive RACH Feature Parameter Description
7 Parameters
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
Feature
Name
Description
OptiCon
stantval
ue
BSC691
0
ADD
UCELL
ADAPT
RACH
WRFD151201
Adaptiv
e RACH
MOD
UCELL
ADAPT
RACH
OptiPow
erRamp
Step
BSC690
0
ADD
UCELL
ADAPT
RACH
WRFD151201
Adaptiv
e RACH
MOD
UCELL
ADAPT
RACH
OptiPow
erRamp
Step
BSC691
0
ADD
UCELL
ADAPT
RACH
MOD
UCELL
ADAPT
RACH
WRFD151201
Adaptiv
e RACH
Issue 01 (2014-04-30)
34
WCDMA RAN
Adaptive RACH Feature Parameter Description
7 Parameters
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
Feature
Name
Description
OptiPrea
mbleRet
ransMax
BSC690
0
ADD
UCELL
ADAPT
RACH
WRFD151201
Adaptiv
e RACH
MOD
UCELL
ADAPT
RACH
OptiPrea
mbleRet
ransMax
BSC691
0
ADD
UCELL
ADAPT
RACH
WRFD151201
Adaptiv
e RACH
MOD
UCELL
ADAPT
RACH
Random
AccessC
learThd
BSC690
0
ADD
UCELL
ADAPT
RACH
WRFD151201
Adaptiv
e RACH
MOD
UCELL
ADAPT
RACH
Random
AccessC
learThd
BSC691
0
ADD
UCELL
ADAPT
RACH
MOD
UCELL
ADAPT
RACH
WRFD151201
Adaptiv
e RACH
Issue 01 (2014-04-30)
35
WCDMA RAN
Adaptive RACH Feature Parameter Description
7 Parameters
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
Feature
Name
Description
Constant
value
BSC690
0
ADD
UPRAC
HBASI
C
WRFD020501
Open
Loop
Power
Control
MOD
UPRAC
H
MOD
UPRAC
HUUPA
RAS
BSC691
0
ADD
UPRAC
HBASI
C
MOD
UPRAC
H
MOD
UPRAC
HUUPA
RAS
WRFD020501
Open
Loop
Power
Control
Issue 01 (2014-04-30)
36
WCDMA RAN
Adaptive RACH Feature Parameter Description
7 Parameters
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
Feature
Name
Description
PowerR
ampStep
BSC690
0
ADD
UPRAC
HBASI
C
WRFD020501
Open
Loop
Power
Control
MOD
UPRAC
H
MOD
UPRAC
HUUPA
RAS
PowerR
ampStep
BSC691
0
ADD
UPRAC
HBASI
C
WRFD020501
Open
Loop
Power
Control
MOD
UPRAC
H
MOD
UPRAC
HUUPA
RAS
Preambl
eRetrans
Max
BSC690
0
Issue 01 (2014-04-30)
ADD
UPRAC
HBASI
C
WRFD020501
Open
Loop
Power
Control
MOD
UPRAC
H
Unit: None
MOD
UPRAC
HUUPA
RAS
Default Value: 20
37
WCDMA RAN
Adaptive RACH Feature Parameter Description
7 Parameters
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
Feature
Name
Description
Preambl
eRetrans
Max
BSC691
0
ADD
UPRAC
HBASI
C
WRFD020501
Open
Loop
Power
Control
Issue 01 (2014-04-30)
MOD
UPRAC
H
Unit: None
MOD
UPRAC
HUUPA
RAS
Default Value: 20
38
WCDMA RAN
Adaptive RACH Feature Parameter Description
7 Parameters
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
Feature
Name
Description
FuncSwi
tch2
BSC690
0
ADD
UCELL
LICENS
E
WRFD151202
FACH
Pool
WRFD151203
MOD
UCELL
LICENS
E
WRFD150236
Campin
g
Strategy
Switch
for Mass
Event
Meaning: 1.BASED_UE_LOC_DRD_SWITCH:
Whether the function of UE location-based multifrequency-band DRD is available. When the conditions
of path loss are met, cell edge UEs in a high-frequencyband cell perform the DRD procedure towards a lowfrequency-band cell, or cell center UEs in a lowfrequency-band cell perform the DRD procedure
towards a high-frequency-band cell. The function of UE
location-based multi-frequency-band DRD takes effect
only when this parameter is turned on and the
"BasedUELocDRDSwitch" parameter in the "SET
UDRD" or "ADD UCELLDRD" command is also
turned on. 2. LOAD_BASED_PCPICH_PWR_ADJ:
Whether the license function switch for Load Based
Dynamic Adjustment of PCPICH is enabled. 3.
ADAPTIVE_RACH_SWITCH(License Switch for
Adaptive RACH): Cell-level license switch for the
adaptive RACH feature. When this switch is turned on,
the adaptive RACH is activated. When this switch is
turned off, this feature is deactivated. 4.
CAMPING_STRATEGY_SWITCH(Switch for Camp
Policy Switching in Heavy Traffic): Whether to enable
the camping policy switching function when traffic is
heavy. This is a license switch for the function. When
the switch is turned on, the camping policy switching
function is enabled if traffic is heavy in the entire
network. Then, the target cell is no longer a preferred
camping cell for the UE in question, but a random
camping cell. 5. FACH_POOL_SWITCH: Function
switch for the FACH Pool feature. When this switch is
turned on, the FACH Pool feature is activated and the
P2F-triggered redirection algorithm is also activated.
Note that P2F indicates a CELL_PCH/URA_PCH-toCELL_FACH state transition. 6.
FACH_TRAFF_STEER_AND_LOAD_SHARE_SWI
TCH: Function switch for the Service Steering and Load
Sharing in CELL_FACH State feature. When this
switch is turned on, this feature is activated. This feature
incorporates the P2F-triggered redirection algorithm for
real-time services, the P2F-triggered redirection
algorithm for non-real-time services, and the algorithm
of P2F-triggered redirection in case of P2D failures for
real-time services.
WRFD151201
WRFD150232
WRFD150246
Load
Based
Dynami
c
Adjustm
ent of
PCPICH
Adaptiv
e RACH
Multiba
nd
Direct
Retry
Based
on UE
Location
Service
Steering
and
Load
Sharing
in
CELL_F
ACH
State
Issue 01 (2014-04-30)
39
WCDMA RAN
Adaptive RACH Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
7 Parameters
Feature
Name
Description
ADAPTIVE_RACH_SWITCH,
CAMPING_STRATEGY_SWITCH,
FACH_POOL_SWITCH,
FACH_TRAFF_STEER_AND_LOAD_SHARE_SWI
TCH
Unit: None
Actual Value Range:
BASED_UE_LOC_DRD_SWITCH,
LOAD_BASED_PCPICH_PWR_ADJ,
ADAPTIVE_RACH_SWITCH,
CAMPING_STRATEGY_SWITCH,
FACH_POOL_SWITCH,
FACH_TRAFF_STEER_AND_LOAD_SHARE_SWI
TCH
Default Value: BASED_UE_LOC_DRD_SWITCH:
0,LOAD_BASED_PCPICH_PWR_ADJ:
0,ADAPTIVE_RACH_SWITCH:
0,CAMPING_STRATEGY_SWITCH:
0,FACH_POOL_SWITCH:
0,FACH_TRAFF_STEER_AND_LOAD_SHARE_S
WITCH:0
Issue 01 (2014-04-30)
40
WCDMA RAN
Adaptive RACH Feature Parameter Description
7 Parameters
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
Feature
Name
Description
FuncSwi
tch2
BSC691
0
ADD
UCELL
LICENS
E
WRFD151202
FACH
Pool
WRFD151203
MOD
UCELL
LICENS
E
WRFD150236
Campin
g
Strategy
Switch
for Mass
Event
Meaning: 1.BASED_UE_LOC_DRD_SWITCH:
Whether the function of UE location-based multifrequency-band DRD is available. When the conditions
of path loss are met, cell edge UEs in a high-frequencyband cell perform the DRD procedure towards a lowfrequency-band cell, or cell center UEs in a lowfrequency-band cell perform the DRD procedure
towards a high-frequency-band cell. The function of UE
location-based multi-frequency-band DRD takes effect
only when this parameter is turned on and the
"BasedUELocDRDSwitch" parameter in the "SET
UDRD" or "ADD UCELLDRD" command is also
turned on. 2. LOAD_BASED_PCPICH_PWR_ADJ:
Whether the license function switch for Load Based
Dynamic Adjustment of PCPICH is enabled. 3.
ADAPTIVE_RACH_SWITCH(License Switch for
Adaptive RACH): Cell-level license switch for the
adaptive RACH feature. When this switch is turned on,
the adaptive RACH is activated. When this switch is
turned off, this feature is deactivated. 4.
CAMPING_STRATEGY_SWITCH(Switch for Camp
Policy Switching in Heavy Traffic): Whether to enable
the camping policy switching function when traffic is
heavy. This is a license switch for the function. When
the switch is turned on, the camping policy switching
function is enabled if traffic is heavy in the entire
network. Then, the target cell is no longer a preferred
camping cell for the UE in question, but a random
camping cell. 5. FACH_POOL_SWITCH: Function
switch for the FACH Pool feature. When this switch is
turned on, the FACH Pool feature is activated and the
P2F-triggered redirection algorithm is also activated.
Note that P2F indicates a CELL_PCH/URA_PCH-toCELL_FACH state transition. 6.
FACH_TRAFF_STEER_AND_LOAD_SHARE_SWI
TCH: Function switch for the Service Steering and Load
Sharing in CELL_FACH State feature. When this
switch is turned on, this feature is activated. This feature
incorporates the P2F-triggered redirection algorithm for
real-time services, the P2F-triggered redirection
algorithm for non-real-time services, and the algorithm
of P2F-triggered redirection in case of P2D failures for
real-time services.
WRFD151201
WRFD150232
WRFD150246
Load
Based
Dynami
c
Adjustm
ent of
PCPICH
Adaptiv
e RACH
Multiba
nd
Direct
Retry
Based
on UE
Location
Service
Steering
and
Load
Sharing
in
CELL_F
ACH
State
Issue 01 (2014-04-30)
41
WCDMA RAN
Adaptive RACH Feature Parameter Description
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
7 Parameters
Feature
Name
Description
ADAPTIVE_RACH_SWITCH,
CAMPING_STRATEGY_SWITCH,
FACH_POOL_SWITCH,
FACH_TRAFF_STEER_AND_LOAD_SHARE_SWI
TCH
Unit: None
Actual Value Range:
BASED_UE_LOC_DRD_SWITCH,
LOAD_BASED_PCPICH_PWR_ADJ,
ADAPTIVE_RACH_SWITCH,
CAMPING_STRATEGY_SWITCH,
FACH_POOL_SWITCH,
FACH_TRAFF_STEER_AND_LOAD_SHARE_SWI
TCH
Default Value: BASED_UE_LOC_DRD_SWITCH:
0,LOAD_BASED_PCPICH_PWR_ADJ:
0,ADAPTIVE_RACH_SWITCH:
0,CAMPING_STRATEGY_SWITCH:
0,FACH_POOL_SWITCH:
0,FACH_TRAFF_STEER_AND_LOAD_SHARE_S
WITCH:0
APPrea
mMeas
RptPerio
d
BSC690
0
SET
ULDM
WRFD151201
Adaptiv
e RACH
APPrea
mMeas
RptPerio
d
BSC691
0
SET
ULDM
WRFD151201
Adaptiv
e RACH
Issue 01 (2014-04-30)
42
WCDMA RAN
Adaptive RACH Feature Parameter Description
7 Parameters
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
Feature
Name
Description
APPrea
mAvgFi
lterLen
BSC690
0
SET
ULDM
WRFD151201
Adaptiv
e RACH
APPrea
mAvgFi
lterLen
BSC691
0
SET
ULDM
WRFD151201
Adaptiv
e RACH
APPrea
mMeas
RptPerio
d
BSC690
0
SET
USATL
DM
WRFD151201
Adaptiv
e RACH
APPrea
mMeas
RptPerio
d
BSC691
0
SET
USATL
DM
WRFD151201
Adaptiv
e RACH
APPrea
mAvgFi
lterLen
BSC690
0
SET
USATL
DM
WRFD151201
Adaptiv
e RACH
Issue 01 (2014-04-30)
43
WCDMA RAN
Adaptive RACH Feature Parameter Description
7 Parameters
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
Feature
Name
Description
APPrea
mAvgFi
lterLen
BSC691
0
SET
USATL
DM
WRFD151201
Adaptiv
e RACH
OptiStar
tLoadSt
ate
BSC690
0
ADD
UCELL
ADAPT
RACH
MOD
UCELL
ADAPT
RACH
WRFD020102
Load
Measure
ment
Issue 01 (2014-04-30)
44
WCDMA RAN
Adaptive RACH Feature Parameter Description
7 Parameters
Parame
ter ID
NE
MML
Comma
nd
Feature
ID
Feature
Name
Description
OptiStar
tLoadSt
ate
BSC691
0
ADD
UCELL
ADAPT
RACH
WRFD020102
Load
Measure
ment
MOD
UCELL
ADAPT
RACH
BSC690
0
ADD
UCELL
ADAPT
RACH
WRFD151201
Adaptiv
e RACH
MOD
UCELL
ADAPT
RACH
OptiSto
pHyst
BSC691
0
ADD
UCELL
ADAPT
RACH
MOD
UCELL
ADAPT
RACH
WRFD151201
Adaptiv
e RACH
Issue 01 (2014-04-30)
45
WCDMA RAN
Adaptive RACH Feature Parameter Description
8 Counters
Counters
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73443289
VS.Random.Ac
cess.ACKNum.
Mean
Average
Number of
Acknowledged
PRACH
Preambles and
Granted
Common EDCH Resources
During Random
Access in a Cell
BSC6900
WRFD-151201
Adaptive RACH
73443289
VS.Random.Ac
cess.ACKNum.
Mean
Average
Number of
Acknowledged
PRACH
Preambles and
Granted
Common EDCH Resources
During Random
Access in a Cell
BSC6910
WRFD-151201
Adaptive RACH
Issue 01 (2014-04-30)
46
WCDMA RAN
Adaptive RACH Feature Parameter Description
9 Glossary
Glossary
Issue 01 (2014-04-30)
47
WCDMA RAN
Adaptive RACH Feature Parameter Description
10
10 Reference Documents
Reference Documents
2.
3GPP TS 25.433 "UTRAN Iub interface Node B Application Part (NBAP) signalling"
Issue 01 (2014-04-30)
48