:
MOHAMED SATHAK A.J. COLLEGE OF ENGINEERING, CHENNAI
Unit test-1
Fifth Semester
B.E- Aeronautical Engineering
AE6502 Aircraft Structures -II
Time: 1 hr 30 min
1.
2.
3.
4.
(OR)
b) Derive the bending stress expression for a beam of unsymmertical cross section if its
subjected to a bending moment of MX and MY. and modify the relationship with respect to
neutral axis.
12. a) A thin-walled beam has the cross-section shown in Fig. If the beam is subjected to a
bending moment Mx in the plane of the web 23 calculates and sketch the distribution of
direct stress in the beam cross-section.
(OR)
b) A thin walled cantilever with walls of constant thickness t has the cross section shown in
fig. it is loaded by a vertical force W at the tip and a horizontal force 2W at the mid section,
both forces acting through the shear centre. determine and sketch the distribution of direct
stress, according to the basic theory of bending, along the length of the beam for the points
1 and 2 of the cross section.
13. For a beam section shown in fig. has four stringers. The area of the four stringers A, B, C
and D are 6.25, 3.125, 4.5 and 6 cm2 respectively. Find the stresses in all the four stringers
of the section due to MX = 50 kNm and MY = -20 kNm where x and y are the centroidal
axes. Assume that webs and walls are ineffective bending.
(OR)
A thin-walled cantilever has a constant cross-section of uniform thickness with the
dimensions shown in Fig. It is subjected to a system of point loads acting in the planes of
the walls of the section in the directions shown. Calculate the direct stresses according to
the basic theory of bending at the points 1, 2 and 3 of the cross-section at the built-in end
and half-way along the beam. Illustrate your answer by means of a suitable sketch.
Faculty
H.O.D