Command:
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: <Ortho on> 8
Command:
Command:
Command: _.erase 2 found
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 6
Command: L
LINE
Specify first point:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Automatic save to C:\Users\PC\appdata\local\temp\Drawing2_1_1_0554.sv$ ...
Command:
Command:
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 10
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 8
Command:
Command: _.erase 1 found
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command: E
ERASE 1 found
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 47
Command: L
LINE
Specify first point:
Specify next point or [Undo]: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _chamfer
(TRIM mode) Current chamfer Dist1 = 0.0000, Dist2 = 0.0000
Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/Multiple]: d
Specify first chamfer distance <0.0000>: 2
Specify second chamfer distance <2.0000>: 2
Command:
Command:
Command:
Command: _fillet
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: r
Command: U
INTELLIZOOM
Command: U
FILLET GROUP
Command:
Command: _.erase 1 found
Command:
Command: E
ERASE 1 found
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 8
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _fillet
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: r
Specify fillet radius <0.0000>: 2
Line, open polyline, arc, elliptical arc, or open spline expected. Select a supported object:
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _revolve
Current wire frame density: ISOLINES=4, Closed profiles creation mode = Solid
Select objects to revolve or [MOde]: _MO Closed profiles creation mode [SOlid/SUrface]
<Solid>: _SO
Command:
Command:
Command: _-VIEW Enter an option [?/Delete/Orthographic/Restore/Save/sEttings/Window]:
_SWISO Regenerating model.
Command:
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: ORBIT
3DORBIT Press ESC or ENTER to exit, or right-click to display shortcut-menu.
Command:
Command:
Command:
Command: _-VIEW Enter an option [?/Delete/Orthographic/Restore/Save/sEttings/Window]:
_TOP
Command:
Command:
10
Command:
Command:
Command: _ai_selall Selecting objects...done.
Command: *Cancel*
Command:
Command:
Command: _ai_selall Selecting objects...done.
Command:
Command:
Command: _ai_selall Selecting objects...done
Command:
Command:
Command: _circle
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
Specify radius of circle or [Diameter] <10.0000>: *Cancel*
Command:
Command:
Command: _circle
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:
11
12
Select objects to extrude or [MOde]: _MO Closed profiles creation mode [SOlid/SUrface]
<Solid>: _SO
Select objects to extrude or [MOde]: Specify opposite corner: 2 found
Select objects to extrude or [MOde]:
Specify height of extrusion or [Direction/Path/Taper angle/Expression] <20.0000>: 25
Command:
Command:
Command: _subtract Select solids, surfaces, and regions to subtract from ..
Select objects: 1 found
Select objects:
Select solids, surfaces, and regions to subtract ..
Select objects: 1 found
Select objects:
No solids, surfaces, or regions selected.
Command:
Command:
Command: _subtract Select solids, surfaces, and regions to subtract from ..
Select objects: 1 found
Select objects:
Select solids, surfaces, and regions to subtract ..
Select objects: 1 found
Select objects:
Command:
Command:
Command:
13
Command: _3drotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
1 found
Specify base point:
** ROTATE **
Specify rotation angle or [Base point/Copy/Undo/Reference/eXit]: 90
Command: *Cancel*
Command:
Command:
Command: _copy
Select objects: 1 found
Select objects:
Current settings: Copy mode = Multiple
Specify base point or [Displacement/mOde] <Displacement>:
Specify second point or [Array] <use first point as displacement>:
Specify second point or [Array/Exit/Undo] <Exit>:
Command:
Command:
Command:
Command: _move 1 found
Specify base point or [Displacement] <Displacement>:
Specify second point or <use first point as displacement>:
Command:
Command:
14
Command:
Command:
Command: _union
Select objects: 1 found
Select objects: 1 found, 2 total
Select objects:
Command:
Command: *Cancel*
Command:
Command:
Command:
Command: _3drotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
1 found
Specify base point:
Too many objects selected for INTERSECT
** ROTATE **
Specify rotation angle or [Base point/Copy/Undo/Reference/eXit]: 180
Command: *Cancel*
Command:
Command:
Command:
Command: _move 1 found
Specify base point or [Displacement] <Displacement>:
15
16
17
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
Press ESC or ENTER to exit, or right-click to display shortcut-menu.
Command: L
LINE
Specify first point:
Specify next point or [Undo]: <Osnap off>
Specify next point or [Undo]: *Cancel*
Command:
Command: _.erase 1 found
Command: L
LINE
Specify first point: <Osnap on>
Specify next point or [Undo]:
Too many objects selected for INTERSECT
Specify next point or [Undo]: *Cancel*
Command: L
LINE
Specify first point:
Checking 595 intersections...
20
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 18
Specify next point or [Undo]: 100
Specify next point or [Close/Undo]: 18
Specify next point or [Close/Undo]: c
Command:
Command:
Command:
Command:
Command: J
JOIN 4 found
4 objects converted to 1 polyline
Command:
Command:
Command:
Command: _extrude
Current wire frame density: ISOLINES=4, Closed profiles creation mode = Solid
1 found
_MO Closed profiles creation mode [SOlid/SUrface] <Solid>: _SO
Specify height of extrusion or [Direction/Path/Taper angle/Expression] <100.0000>:
Command:
Command:
23
Command:
Command: _3drotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
1 found
Specify base point:
** ROTATE **
Specify rotation angle or [Base point/Copy/Undo/Reference/eXit]: 90
Command: *Cancel*
Command:
Command:
Command:
Command: _move 1 found
Specify base point or [Displacement] <Displacement>:
Specify second point or <use first point as displacement>:
Command:
Command:
Command: _union
Select objects: 1 found
Select objects: 1 found, 2 total
Select objects:
Command:
Command:
Command:
Command: _3drotate
24
25
Command:
** ROTATE **
Specify rotation angle or [Base point/Copy/Undo/Reference/eXit]: 90
Command: *Cancel*
Command:
Command:
Command:
Command: _3drotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
1 found
Specify base point:
** ROTATE **
Specify rotation angle or [Base point/Copy/Undo/Reference/eXit]: 90
Command:
Command:
Command:
Command:
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*
Command:
Command: _3drotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
1 found
Specify base point:
26
** ROTATE **
Specify rotation angle or [Base point/Copy/Undo/Reference/eXit]: 180
Command: *Cancel*
Command:
Command:
Command:
Command: _move 1 found
Specify base point or [Displacement] <Displacement>:
Checking 561 intersections...
Specify second point or <use first point as displacement>:
Checking 630 intersections...
Command:
Command:
Command:
Command: _move 1 found
Specify base point or [Displacement] <Displacement>:
Too many objects selected for INTERSECT
Specify second point or <use first point as displacement>: <Ortho off>
Checking 561 intersections...
Command:
Command:
Command:
Command: _move 1 found
Specify base point or [Displacement] <Displacement>:
27
28
30
31
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command:
Command: _move 1 found
Specify base point or [Displacement] <Displacement>:
Specify second point or <use first point as displacement>:
Command:
Command:
Command:
Command: _move 1 found
Specify base point or [Displacement] <Displacement>:
Checking 1176 intersections...
Specify second point or <use first point as displacement>:
Checking 820 intersections...
Command: *Cancel*
Command:
Command:
Command: _subtract Select solids, surfaces, and regions to subtract from ..
Select objects: 1 found
Select objects:
32
33
34
Select objects:
Command: U
SUBTRACT GROUP
Command:
Command:
Command:
Command: _copy 1 found
Current settings: Copy mode = Multiple
Specify base point or [Displacement/mOde] <Displacement>:
Specify second point or [Array] <use first point as displacement>:
Specify second point or [Array/Exit/Undo] <Exit>: *Cancel*
Command:
Command:
Command: _subtract Select solids, surfaces, and regions to subtract from ..
Select objects: 1 found
Select objects:
Select solids, surfaces, and regions to subtract ..
Select objects: 1 found
Select objects:
Command:
Command:
Command: _3drotate
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
Select objects: 1 found
35
Select objects:
Specify base point:
Too many objects selected for INTERSECT
** ROTATE **
Specify rotation angle or [Base point/Copy/Undo/Reference/eXit]: 180
Command: *Cancel*
Command:
Command:
Command: _subtract Select solids, surfaces, and regions to subtract from ..
Select objects: 1 found
Select objects:
Select solids, surfaces, and regions to subtract ..
Select objects: 1 found
Select objects:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command: _.erase 7 found
Command: U
ERASE
36
Command:
Command:
Command:
Command:
Command:
Command:
Command: _.erase 6 found
Command:
Command: _.erase 1 found
Command:
Command: _.erase 1 found
Command:
Press ESC or ENTER to exit, or right-click to display shortcut-menu.
Command:
Command: _.erase 1 found
37