X-EKS MX
18
X-ECT MX
14
X-ECT 40 MX
X-EKSC MX
X-GN 27
X-EGN 14
X-U 16/22/27
1.8
27
28.9
1.8
o3
o3
1.9
o 6.8
o3
Ls
o 6.8
o 6.8
X-GHP 20/24
14
15.8
2.4
Ls
L
General information
Material specifications
X-ECT and X-EKS:
Polyamide (halogen and silicon free), light grey RAL 7035 and
PBT (silicon free, flame retardant), stone grey RAL 7030
Nails:
Carbon Steel HRC 58
HRC 53.5
Zinc coating 213 m
520 m
X-UCT MX:
See X-ECT MX, X-UCT MX and X-EKS MX fastener program in the next pages and Tools and equipment
chapter for more details.
Approvals
CSTB(France)
UL(USA)
01 / 2015
261
Applications
Examples
Rigid conduits
Load data
Recommended loads
Fastener
Service load 1)
[kN]
X-EKS MX
0.02
0.04
) The recommended service load is determined by the serviceability of the plastic part.
Application requirements
Thickness of base material
Steel
tIl 4 mm
tII
Concrete
X-U: hmin = 80 mm
X-GHP, X-GN:
hmin = 60 mm
Spacing
50100 cm along the cable tie. Adjust spacing as needed to achieve stability of cable tie
Corrosion information
These zinc-coated fasteners are not suitable for long-term service outdoors or in otherwise
corrosive environments.
For further detailed information on corrosion see relevant chapter in Direct Fastening
Principles and Technique section.
262
01 / 2015
Fastener selection
Suitable cables with X-ECT MX, X-ECT 40 MX and X-UCT MX fastener
Cable type
No. of cables
NYM 5x1.5
10
10
NYM 3x1.5
Conduit type
Plastic conduit
14
No. of conduits
1640 1
Fastener program
Nail
Base material
Designation
Concrete
Concrete
Steel
Concrete
X-U 22 MX
X-U 27 MX
X-U 16 MX
Shank *)
Technology ds [mm]
Shank length*)
Ls [mm]
DX 4.0 22
DX 4.0 27
DX 4.0 16
X-GHP 20 MX GX 3.0 20
Concrete
X-GHP 24 MX GX 3.0 24
Steel
X-EGN 14 MX GX 3.0 14
GX 3.0 27
L [mm
21.8
25.8
28.9
15.8
*) Standard chank diameters and shank lengths. Other combinations available on special order.
Tools:
DX technology: DX 460-MX, DX 351-MX (for X-ECT MX and X-EKS MX)
GX technology: GX 120-ME, GX 100-E (for X-ECT MX, X-EKS MX and X-UCT MX)
G
01 / 2015
263
X-EKS
Item no.
Designation
2105391
X-EKS 19 MX
285719
285720
285721
285722
285723
X-ECT
X-EKS 16 MX
X-EKS 20 MX
X-EKS 25 MX
X-EKS 32 MX
X-EKS 40 MX
Designation
285710
X-ECT UV MX
285711
432947
X-UCT MX
Item no.
2095183
Item no.
Designation
340229
X-GHP 20 MX
338872
438945
34541
DX Nails
X-ECT MX
X-ECT FR MX
X-ECT 40 MX
X-UCT MX
X-GHP 24 MX
X-GN 27 MX
Designation
237346
X-U 22 MX
237347
X-EKSC
X-U 16 MX
X-U 27 MX
Item no.
Designation
274086
X-EKSC 20 MX
274083
274087
Designation
X-EGN 14 MX
Item no.
237344
Item no.
285709
GX nails
386469
386470
X-EKSC 16 MX
X-EKSC 25 MX
X-EKSC 32 MX
X-EKSC 40 MX
System recommendation
DX tools:
Steel:
Concrete:
Masonry:
GX 100 tool:
GX 120 tool:
G
264
01 / 2015