(liters)
Axis labels
(atmospheres)
(liters)
(torr-1)
(x1, y1)
(x2, y2)
= mx +
The following table shows the rate constants for the rearrangement of methyl
isonitrile at various temperatures (these are the data in the table:
(a) From these data, calculate the activation energy for the reaction.
ln k = -(Ea/RT) + ln A
Must be in Kelvin units
Solve: (a) We must first convert the temperatures from degrees Celsius to
kelvins. We then take the inverse of each temperature, 1/T, and the natural log
of each rate constant, ln k. This gives us the table shown at the right:
(x1,y1)
(x1,y1)
(Kelvin-1)
ln k = -(Ea/RT) + ln A
slope = m = -Ea/R
10
Because logarithms have no units, the numerator in this equation is dimensionless. The denominator has the
units of 1/T, namely, K1. Thus, the overall units for the slope are K. The slope equals Ea/R. We use the value
for the molar gas constant R in units of J/mol-K (Table 10.2). We thus obtain
We report the activation energy to only two significant figures because we are limited by the precision with
which we can read in the graph.
11
Keq
210
73
31
16
CO2(g) + H2(g)
T (K)
478
533
588
643
Using the above information to determine H from a plot of ln Keq (y-axis) vs. 1/T (x-axis).
12
2. Chemical reactions occur at a wide range of rates. Some are very fast (chemical explosions,
neutralization reactions...). Others are very slow (rusting of iron, cooking, the aging process).
Chemical kinetics is the area of science that study the rates of chemical reactions and the factors
that control these rates.
The Arrhenius equation relates the rate constant of a chemical reaction (this constant is specific
for a given chemical reaction and it only changes with temperature changes) with the activation
energy (the minimum energy the molecules must have to react).
The Arrhenius equation is k = AeEa/RT , where k is the rate constant, A is a constant, Ea is the
activation energy, R is a constant = 8.3145 J mol1 K1 , and T is the temperature in Kelvin units.
Using natural logs on both sides of this equation we obtained,
ln k = Ea/RT + ln A
A plot of ln k (y axis) vs. 1/T (x-axis) will result in a straight line with slope = Ea/R and
intercept = ln A. Using the tabulated data below determine the Ea energy for a chemical
reaction from a plot of ln k (y axis) vs. 1/T (x-axis).
k (L mol1 s1)
0.0521
0.101
0.184
0.332
T (K)
288
298
308
318
13