Cut-away of the two cylinder compressor. Note how the connecting rod between
the crankshaft and the piston rod is connected to the piston rod at the crosshead.
The piston rod screws into the crosshead. A pin attaches the connecting rod to the
crosshead.
31
EDS/CD-32
Single cylinder compressor. Double acting with one inlet and outlet valve on each
side. The box mounted on the frame is the crankshaft driven cylinder lubricator.
The oil lines from the lubricator to the cylinder can be seen. Typically, the packing
box is also lubricated by this lubricator.
32
EDS/CD-33
Two cylinder, two-stage compressor. The larger first-stage cylinder is on the right.
The first-stage cylinder has 12 valves total, the second-stage cylinder has four
valves total. Again, note the cylinder and packing lubricator mounted on the
crankcase.
33
EDS/CD-34
Two cylinder, two-stage compressor. The larger first-stage cylinder is on the right.
The first-stage cylinder has 12 valves total, the second-stage cylinder has four
valves total. Again, note the cylinder and packing lubricator mounted on the
crankcase.
34
Piston Rod
Head End
Piston
Crank End
Crank
Connecting
Rod
Rod
Packing
Crosshead
Crosshead
Guide
EDS/CD-35
35
Prime
Mover
Flexible
Coupling
EDS/CD-36
36
EDS/CD-37
Cut-away of the two cylinder compressor. Note how the connecting rod between
the crankshaft and the piston rod is connected to the piston rod at the crosshead.
The piston rod screws into the crosshead. A pin attaches the connecting rod to the
crosshead.
37
Crankshaft
EDS/CD-38
Cut-away of the two cylinder compressor. Note how the connecting rod between
the crankshaft and the piston rod is connected to the piston rod at the crosshead.
The piston rod screws into the crosshead. A pin attaches the connecting rod to the
crosshead.
38
Connecting Rod
EDS/CD-39
Cut-away of the two cylinder compressor. Note how the connecting rod between
the crankshaft and the piston rod is connected to the piston rod at the crosshead.
The piston rod screws into the crosshead. A pin attaches the connecting rod to the
crosshead.
39
Cross Head
EDS/CD-40
Cut-away of the two cylinder compressor. Note how the connecting rod between
the crankshaft and the piston rod is connected to the piston rod at the crosshead.
The piston rod screws into the crosshead. A pin attaches the connecting rod to the
crosshead.
40
EDS/CD-41
Cut-away of the two cylinder compressor. Note how the connecting rod between
the crankshaft and the piston rod is connected to the piston rod at the crosshead.
The piston rod screws into the crosshead. A pin attaches the connecting rod to the
crosshead.
41
Packing Box
EDS/CD-42
Cut-away of the two cylinder compressor. Note how the connecting rod between
the crankshaft and the piston rod is connected to the piston rod at the crosshead.
The piston rod screws into the crosshead. A pin attaches the connecting rod to the
crosshead.
42
EDS/CD-43
Four cylinder, two-stage compressor. The smaller second-stage cylinders are on the
right.
43
EDS/CD-44
Four cylinder, two-stage, compressor in field. Note the suction pulsation bottles on
top of the cylinders. There are also discharge pulsation bottles under the cylinders.
The pulsation bottles dampen the pulses caused by the reciprocating action of the
pistons and ease the pulsations on the piping and foundation.
44