Anda di halaman 1dari 46

Acer AL1511

Service Guide

Service guide files and updates are


available
on the CSD web; for more information,
please refer to http://csd.acer.com.tw

Copyright
Copyright 2003 by Acer Incorporated. All rights reserved. No part of this publication may be
reproduced,transmitted, transcribed, stored in a retrieval system,or translated into any
language or computer language, in any form or by any means, electronic, mechanical,
magnetic, optical, chemical, manual or otherwise, without the prior written permission
of Acer Incorporated.

Disclaimer
The information in this guide is subject to change without notice. Acer Incorporated makes no
representations or warranties, either expressed or implied, with respect to the contents hereof
and specifically disclaims any warranties of merchantability or fitness for any particular purpose.
Any Acer Incorporated software described in this manual is sold or licensed "as is". Should the
programs prove defective following their purchase, the buyer (and not Acer Incorporated, its
distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and any
incidental or consequential damages resulting from any defect in the software.

Acer is a registered trademark of Acer Corporation.


Intel is a registered trademark of Intel Corporation.
Pentium and Pentium II/III are trademarks of Intel Corporation.
Other brand and product names are trademarks and/or registered trademarks of their respective
holders.



Conventions
The following conventions are used in this manual
:



Preface
Before using this information and the product it supports, please read the following general
information.
1. This Service Guide provides you with all technical information relating to the BASIC
CONFIGURATION
decided for Acer's "global" product offering. To better fit local market requirements and enhance
product competitiveness, your regional office MAY have decided to extend the
functionality of a machine (e.g.add-on card, modem, or extra memory capability).
These LOCALIZED FEATURES will NOT be covered in this generic service guide.
In such cases, please contact your regional offices or the responsible
personnel/channel to provide you with further technical details.

2. Please note WHEN ORDERING FRU PARTS, that you should check the most up-to-date information
available on your regional web or channel. If, for whatever reason, a part number change is made,
it will not be noted in the printed Service Guide.
For ACER-AUTHORIZED SERVICE PROVIDERS, your Aceroffice may have a DIFFERENT part number
code to those given in the FRU list of this printed Service Guide.
You MUST use the list provided by your regional Acer office to order FRU parts for repair
and service of customer machines.





 
   

  
        
  
         
    !  
                   
      
      !
                
           
    
       

   ! "   


                 !# 
   
   
       
     
         
     
  
 $
!

      !

%! #         


  !
&!    
         
      !
'!      (   )*    !





!    


     (           
     +
      
 !
%! ,    -  
   
  
 
 !

 

         



      
         
   
   

- 
    
  
       
  ./. 01,-

 

  !



 


          


 
 
              !    
  
 










!  
    "    
""   


"  "  
! 2     
             ! # 
          3      

    !4    

  
    
  !
# 
  
           
   5    
      5 
    !
! ,        5  
         !     

          
              5  ! 2     

     


  !2     
         !2  
  
    5           !
! 
     
         !#    
    
     
!

!  
"  #  


"  $ 
 % 

"     
"
    
 

   
    #"
         
 
   

          
   


!& 
 
 
     "  "  
    
"       
 "
 
! 2       (   !6      5!
! /  3      
     !#         5!
/   
  !
! 2   
  
  7   
  (     
  8 !       
!             
       49   
         
 
5  ::;%':*-< !&!-!
!  5       
     !
!         =  %*2>    


















 
 


 "   " '(        






 2        
5    !  ,    
       
5 5  !
 1
             5    !
 92    (??!??@
!# 
 
:!:@  
 
(  (    
!
 2    92    
   

      
 


  !#        
   
, !



Table of Contents
Chapter 1

Monitor Features

Monitor Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Factory Preset Timing Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Mainboard Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Software Flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Mainboard Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Invertor Board Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Front Bezel View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Rear Bezel View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Chapter 2

Operating Instructions

20

External Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Front Panel Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
OSD Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Hot-Key Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
OSD Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
LOGO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Chapter 3

Machine Disassembly and Replacement

28

Chapter 4

Troubleshooting

31

Chapter 5

Connector Information

34

Chapter 6

FRU (Field Replaceable Unit) List

35

Exploded Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Chapter 7

Schematic Diagram

Analog Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Scaler MST 8001A/MST8111A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Panel Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MCU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Appendix

Online Support Information

40
40
41
42
43
44

45

VII



Monitor Features


   



 



 ( ")

&%*+$ (&%*+$, 

- ) 

*.&"/0  "




, 34  #2& #*., 


  *.56 78!768#$

, /


7:7- 
 6"

 ;

  "%

0,


<=; "

,<=; "

..<$.

 



#9%*@





"A

!&@B

!&@B

@(%
;


#&*2($9!C$.

#&*2($9!C$.

;D

,E #0*- 

F@
/

&G

&G

@
/

G

G

EE 

 ;
"


 ;, /
  







!"#$%&' 






!"#$%&' 

&%*+$ (&%*+$, 

&&"/0  " 


.&1# " 

2.&1# " 

#2& # &, 

*.56 8+068#9


7:7- 
 6"
0,
&>?9&>

..<$.

#9%*@




&>?9&>

,E #0*- 

< ;4#. 


 
1&%$,< // 7
$.@7
  

 
1&%$,< // 7
$.@7
  

@( ; "   


 
1 $%+*

, "1*$&% 2


3
;"

#&&H*92,72$H9 B



 
1 $%+*

, "1*$&% 2

#&&H*92,72$H9 B


E  
 

 /


 1.I
.&I

%1<*&I
9.I
 ; / 1#&J
!.J

 1.I
.&I

%1<*&I
9.I
 ; / 1#&J
!.J

  


2#.G K2*  K#.* 

G )F%G% 

.%&AL   



3 ")

 ;
/M;>
  
  
    
 
3-;

 @EFL0E( 

 ;
/M;>
  
  
    
 
3-;

 @EFL0E( 

E( 

1

; "


 

 - ) 
 
";
 
"A
 %
 

 ,%
 

   ; "/
  ;
 
<
/
;
"/
 G 


 

 


 :-

;
 
    
;
  6


 E( 

 

 - ) 
 
";
 
"A
 %
 

 ,%
 

   ; "/
  ;
 
<
/
;
"/
 G 


 

 


 :-

;
 
    
;
  6


 E( 


3
;


@( ; 

2.G

2.G

;/
;;



/
3#G")  

/
3#G")  

 7N,0: 7E7O++7L

 7N,0: 7E7O++7L

;

  " 




 

 



*

!
 
45/56/74/)
45/56/7:8)
45/56/7:0)
6//4//704)
6//4//74/)
6//4//7:8)
6//4//7:0)
3/85:4674/)
3/85:467:/)
3/85:467:0)

;<

1;<

=;<

) 
  

+ 
1  +  1 
+ 
,
  2  ,
2 
2
 
-.#/0)
-.#3)
( 
$*)%
6//080
3549
+
0995/
+
803:0
6808/
:643
+
:86/9
+
30//
65/0//
:0//
+
:0//
+
30//
3/85480
0304
+.2
0480/
+.2
4///
3/04486
:6:9
2
4/3:
2
5////
3/5/444
56/::
2
:8366
2
0////
3/04480
546:0
2
:0///
2
590//
3556/4
564
+
4///5
+
40///
3866/4
045:4
+
://49
+
:0///
3386//
4//8
2
:0/89
2
:6:0/

  




>1
=;<

:8/5//7:/)
3/85:467:8)

9//559
3/5:96

) 
3549
+
0:030
2

  
://6:
2
:83
2


8688
:0///

 

VGA

45/56/74:)

1;<
684857:0)

=;< 3/85:4674/)

3/85:467:0)

645080

0///

+

4444:

+

/85/

330844:

59:80

+

:5003

+

0:868

33863
3866/5

56:6/
4/853

+
+

4///3
:598:

+
+

45///
6////













Monitor Block Diagram

    
 !"" "#
  "!$ #
%  &'($  #



 
   

 



 




 








LCD






'(2<+?'

Controller
MCU

12?<@?!

#1 
#>1
#'1(
#<(






12?<@?!

  
  

 

  





(SCL/SDA

;<!.;.A


;<Hsync/Vsync
 



)*(*







 


 





 











 






 






 













Software Flow Chart


+&,

+',

+-,

+.,

+/,

Y

N
+1,

+0,

+2,

N
+4,

+&&,

+&',



+&3,

1. Initialize MCU settings, including I/O, Timer, ISR and Serial Port
settings.
2. Read EEPROM content to recover monitor settings, including brightness,
contrast, color temperature and OSD position . etc.
3. Initialize system variable, including system flag, OSD timeout counter,
burin mode status etc.
4. Initialize OSD menu variable for user operation
5. Initialize device on the board, now only MST scaler chip will be
initialized
6. Check if system is in power off status from first AC power up. If yes,
then go to 7, else go to 8.
7. If yes, system will be forced to enter power off status
8. Mode detection
9. Check if input timing has been changed, if yes then go to 10, else go
to 11
10.
Setup MST scaler for display according input timing
11.
OSD handler for OSD operation.
12.
Debug handler, only debug only



Mainboard Layout


*16/33
<.6333<


 !"


 

 

 !

"#

$ %&#'(#)*+*$

"#

*,

#

#-$



$#)(($

(#

$ 

#

&)##
./
#)

#

$$&$
#$#

$#

$'
 0 
1%$ &

$(#

* 2$3!456 &


3

$(

(


$-(

*  
'77

$#

  

$

/ #
'77 


#

$*
 )
 #3*8-



$*
 )
 #3*8-



Inverter Board Layout


5

 

43&

*612.&78*8*5

43' 

9&'-82'

43-

).-&

43/

% &32.$--

431

% &32.

9'3&

:;< 

43&

%%9 78 *)


<743'


 %5

43&

2 )
 

<43&

/#':'3<=*5

743&

7 65'>7931


&3'

)5%5 '?19


'3&

#'9 % 978%5*


'3'

#'9 % 978%5*


-3&

9)
5@%>+ !*9>,


-3'

-9



43&

%* >5

A43-

'*>'441



Front Bezel

Item

Description

Auto Adjust Key/Exit

>/ Volume up(option)

</ Volume down(option)

MENU/ENTER

LED

POWER



Rear Bezel

Item

Description

AC POWER CORD

Signal Cable

Only for speaker



Audio Cable






Operating Instructions
)
34;

; )




66%)
)"

4;

"/6
 
6)

%-
")  ) 7) ";" 4/M;/

;
6 "%

 )
3"
/)
;/4"
"/%
 
") /
"46
)


) /
"/%
 )
34;

; 
)


 
%)
3 / "
3  );%







     E(   

  -;







  

 
 
 !   
% & 
  

 
" #$
' ( )  





 

 
  
 
) 4;

; )

F
%


     
"   ;3)   
" 0/<" /M; 6; "
3)   F
E(   ;
3)  ,
;/M; ;%


  
 
*+, - + * ) - - ./$.00) ,+1, -)1-,
 *  - ./$.)
,
,2 *  - 2 * ,*+,



  
*+, - + * ) - - ./$.00) ,+1, -)1-,
 *  - ./$.)
,
,2 *  - 2 * ,*+,





    
  
#%G)   ;  " ;7) 4;
3 "EK<>EP
EK  ; %
*% G)   ;  
66;7) 4;
6
*"
/
" );
/M; 6; "
%
);
/M; 6; "
 ;/
)
7,
7
"A /
";% 


 
  
: 

Q

  Q


3 
/%
66
/%

  ! "



! "


 

 )

 
"
 )
;";")/ 

 /;"7
 ";4M"
/ "
;  )7
(" /;
") " 4

)
"A%

 )
  )  "
 /"A  7)3 "
 ) / 6
;)
) 
;

%
 
( ;
"
7"A
;

 3
  "A/)6"
%
 
A)



A  37
/ ""  3 )
6"
)% ;44
  4
/3 )"
) )
/ /3 ) // 
;
%F;

 ;")) 74  7
4 " 7 "
)3 /)"4 %6";
73; ;)

46
"  %




#%
*%
%
2%
.%

)@EFL<4;
  
" ) 3 /
3% 6 ;2%

  
")/ /6; "
% 6 ;2%
)@EFL<4;
  
")6; "
)
;3 
/M;%

  
") ) 
6)"; 6; "
%

(  /7")( 6; "
%6
;3 
/M; 
)6; "
7*<2% 



ADJUSTING THE PICTURE




  



<  #> *








 !"#$#! #!#$ #





   
 

  





  

 





 !!"

 

!#$%!

&#(' )*%!

 

!#&'!$%!


 &'!

+#%

)*% ,#%! ,'!  !)%#! -. /!  

 %

 !
 #(

)*% 0#%! #(  !)%#! $!# /!  

 %

 !"
-",

)*%'!'.0'!0#%!"

 

 %

)*%'!1!#0'!0#%!"

 

 %


 $",

2

3 

!#2 !0!%!,45" 3 

'!  !0!%! 7 8!



3 

!# !0!%!,45"

3 

!"

!)  !!"

 

 6!3!)

'!6!3 3&1%!9)!%


6!3 !!

!!  !!"

 

!!%#"


6!3&%!

: 7  8! 5)!) 8;

&%!  !!"

 
3 


'

3 

<!4<)0;%!'"



3 

<! 4< )0; %!  ) 3 

'! /%! 7 8! ! 


'"

'!!"


!%#'

3 

<!4<)0;%! !"

3 

+=

3 

<!4<)0;%!+!#'"

3 

0>

3 

<!4<)0;%!<0"

3 

?

3 

<!4<)0;%!?"

3 



3 

<!4<)0;%!<0!)'!!" 3 

 

3 

<!4<)0;%!@0!!"

3 

)*%'!'.0'!4<"

 



)*%'!1!#0'!4<"

 



)*%'!4<!%"

 



-",
 $",

4< !%




%

3 

% )*%'!-3$,A+#%)#( 3 

3 

0#%!"


9  4;
5)!:
?

3 

<'7'!!%A-3$!B%!#;)0%0 3 

3 

#%!0%"

!!

3 

! !#' ) %  % #% ) 3 

3 

!'!#!0!%!"

C

3 

C4<

3 



3 



 !" # $! 





 !"#$#!%#&'($ #
 

 





  


  


$%! 2'! '! 4<  #!)A 0! /!  '
8%78!$%!- D!;+%#

$%! %))*%!" '! %)78!  


 5%!7'!1%!E"




 

 



%

  &&'







 !"#$#!)*

 

  


%

": 2'! 0%A6!,!- D!;F %GA7'7'!!A)'!)'!%

,!!2

#%#"
": 2'!0%A7'%'4<5!!"

?0%<%00!) 2'! '! -;# +!B%!#;A $;# +!B%!#;  !%  %  '!  %00 !A 7 '7 '
!!" '!!78!;"
8!!#!)":  4; 5)! H 2'! '! 1)! #8!   #!#!)A 7 '7 ' !!" ' !! 7 8!
;"
": % ?0%5)!H% ?0%5)!7'%'4<5!!"
<

":  4; 5)! H 2'! '! 1)! #8!  #!#!)A 8% '!!   #1!  0%A 7 '7 '
!!A'!!!07!1"
": % ?0%5)!H2'!'!1)!#8!#!#!)A'!1)!#8!#!#!)8%'!!#1!
0%A7'7'!!A'!!!07!1"



(



B   6       #




)  *

  

+ 
() *%%+,-. 


) 

 =; /3 ),E #0*-"4   ""
/ 
),E  F%
3)



6
))

6  /   /7/ / 
)
6;/7"
; "// 
 6

4
; 
/ "4   %)"
; "
")  /6 / 3
7# /*-%
)# ; / "
/") 6
)/ 
))
)"
 ;
;  E 6

%)
*- 4 / "
/") 4/
)R

"
%))
" =;E 6


)*-
") %

 
             
          

) 

): 

 //4), /
E"
"  //
" 
,E   /0
)
L / E  
 
"
 "E  /) 3/ )
6/
E
FLE> %) 6; 
/  /
"
" " 4/;" 
3"
;
3) ) 
 /
< ;   %G) 
) 
 /
 ;  ) 

76

3  <
;
/73 ;
 "3 ")
 
/%) /;"
)

S  
3;"
;
%6) /
 ;   
/76;
3 
/ /)/ 
;
 "/3 %) "   
' "  '6;(")/  "

66%)
/  
/4 A
)A4
/7
" "A )
;%


 "'# '#!$ +!% 



)""

3"
/6
)F
)  " 
 )3;3 )FE@.<#. / L / / 
4/%)
 6
)
3"
/)4#*.
%
; / 3 ) ;   // 6
 "
"
 
 
3
;
6 
 "
;1  ;  "
/  "
  
6 
 ;F
%#!G:7 T
 ,)"
/;"
6( 4"
/%  / 3 )
; / ") 
;7/#&7*.&,7EE<**"
6 ;
%)
) / 3 )
//<
"
"
4
/7/
#&7*.&,7)  //EE<**2 , * 21), 

)
3;"
/ /
;,E&9&*7&9*.7&!*#

3"
/ E;
 "
;  %






Machine Disassembly

This chapter contains step-by-step procedures on how to assemble the monitor


for maintenance and troubleshooting.
NOTE: 1.The screws for the different components vary in size. During the disassembly process,
group the screws with the corresponding components to avoid mismatch when putting back
the components.
2.
C !    "D! ! ! 

"" #
3.B"
9

 





  !!


 

!"C


 &

&  "  


'  !  

 '

E


!F!   








9

 

 
 !  


!F   




!F    




  %




 !F %    + !


,


     % +


! ,



! 




!F   



 %!"!F 
 

* 5
6)C  



  E   
B"C&#      " "   
'#
 














Troubleshooting



   "!!%&/&&C 




Defect Mode

Failure Analysis

Repair

Testing

 "




7"

""





9


9"

"*"
!




7" *




!




9




 









9 7

"9 7



"

9

"9

>

">


9 

"B 




 






"

9

"9








+,


+-









Defect Mode

Failure Analysis

Repair

Testing




 

*"

"*"

<




"

9

"9

%
6



9

(
G6G7
 
%




 
* 
























 "

9 
 
%

"
"9
"(


*"


"*"




"

9

"9

9 

"9 



"

>

">

*"

"*"



"



"

+-









Defect Mode


Failure Analysis

Repair

5
 
%

">
 

5 !!


5




5%


5<
%
>

B 







>
%
*

Testing

">
 
">
 
">
 
"B 
"
">




"

(*B

"(*B




+-























                                                
The following figure shows the connector locations on the monitor board:







&/$9 *"+$ ,










$
&
(


 












  











 





 
! "#
% "#

 
#'




                               
) ") 
;)L /"4L     
4"
6 ;

6Monitor AL1511%6
) 
")3) 
/ 6

 
6
@; @") / ;)
 
 %
)
GEFEF:L 7
;)
;/")"A)
;<
</ 6

 4

;
34

") %
3)
 ;4")  /7 3 
4
/
) /  ":; /%
E
LBE E,E,E 7
;"
66 ")EEF ;4"
/6
)
   )
L 
6)  /  ":; /%P
;@L ;)
"L 
 //4
;
"
66 "

/L
6
  / "
6";
") %
NOTE: 
"

; )/6" 7
;)
;/6

3)
"
 
/  "
;

)
3

/ 
 
7
6

3);4
;
"
66 "
)
3
;  %


Exploded Diagram






Note: above picture show the description of the following


component



 

Plz access to website (http://aicsl.acer.com.tw/spl/) for obtaining the update FRU version.

#

9

 

&

<7E




'

<

7

-

9

.

*

/

(5*%9

1







#

  9

 


)"

0




    * 

2

< 

4



&3



&&



<  

&' 




&-

*+,





#

  9

 

&.




&/

%7+,


&1

*"


%+,

&0


9 

&2




&4


'3

(*

*"

'&


''

!  





#

  9

 

'-

  


'.

6 


'/

)"  


'1

<  


'0

   

$   

'2









 


Schematic Diagram
Analog input

0
1

0

SOT-223

"





9

/  
62<="52"<

0
1




49


268

49

 /  



?
48 .



0


0

/

# ;5<


+

  

B E

0





+
0



0


 

Brightness

0 /  





  

0
1

?
48 .

B E


0



;"

;"
0

0





  

  

9
5: 8

5&
"

29



0
/





.



  









 




&

?
+





  


!

"*






48 .
/

#4>0
 

?
2 
/ /  


 

TO-263




@ ;5<



0


0



0

"





. :0-

-&"

  

-&"
-&"



-&"

0

-&"

2&345607
&
2&>2

 "58




0
-&"
/

0

.
 -&"



"52"<





 
 

"#$%&%'(





)

+

#,

INPUT
  



     /

 

  



    0 /

 

  

     /



/    / 

0

     /

    . /

/

     /

40

0

->2&

/0  

" 

..

&

 
&

 

" 

..

2-

-&"

-&"-

-&"


  

0268



5&

0


 

&

0

6 5

-5&

  

.

  



0  



  

0

>"<
6 =&

40

=&

" 

..

 

5&

0

 

/
/0  




/0  

B"
B"



& 
"0



/



.
0




" 
0:- 

" 
8;;0 0

 



 

  

A

  

A

" /
8;;0 0

" .
8;;0 0

/
  

; >""
">""

0



  

  
  

& 

 +
+
0+
$D+
"1
":
"1
":
"1
":
" 1
" :
"1
":
"01
"0:
$D1
$D:
 &



.


" 
8;;0 0




.


  &


  &

"
50

" 
" 0
" 
;;0 0
0C& ;;0 0
0C& ;;0 0
0C&


  &

"
50

" 0
0:- &


  &

>"<

 

&

  &


/

.




0






1
:
-1
-:
1
:








; 1
; :





  &

 0

9 

/

0


4
;
"




-&"






&

&: &

"  " / "  " . "  "  "  " 


&

&

&

&

&

&

&

&


!

"*








"">"
"">;

0

; >""
">""




-&"

&: 

" 
8;;0 0

0

/
.


0

/




4
;
"



--&"
6 =&

=&
=&-&"
"" ;
"" "
10

64"

 

9 

/

0



   

"#$%&%'(

)



0

+

#,

Scaler MST8011A/MST8111A
 +




"" @ 2>
"" @"/

'+ %
' %









" 3

'=
'4
;=
;4
=
4
2>=
2>4
' 1 +.+6

+
+


+



0
1




0

,

 





+.+

""



""



+
+.+

 0  1 + ++ + +


++++++++

+ + +0 +


++++

+
0
10
++0
""
""
""
""

++
+

1
+
++
+

,

"",
"",
"",
"",
"",
"",
"",

'3%
'3%

;3%
;3%

;3%
3%
3%

<% 
<% 
"" +@ 2>.;,
"" +@"/.;,0

/ ""@,22


+

/ ""
/ ""




1
+

0
0

1


'3%
;%"'
;3%
;%";
;
3%
;%"
<%
<%

/ ""@" 3
/ ""@" 3

,22 " 3 ",22

/ ""@
,22

:+

/"




2 / ,
2 /

2 / >,
2 / >

2 /,
2 /

2 /+,
2 /+

2 /,
2 /

+
+
+
+0
+
+1
++
+++
++
++

,/
,/+
,/
,/
,/
,/
,/
,/0
,/
,/1

,/819

//+ 
,/819

//+

/"



+1
+.+

'=
'4
;=
;4
=
4
>=
>4
'7?

% .2  ,
% .2 

% .2  >,
% .2  >

% .2 ,
% .2 

% .2 +,
% .2 +

% .2 ,
% .2 

'7,

++
++1
+
++
+
+
+
+
+
+

,
,+
,
,
,
,
,
,0
,
,1

,819

 +
++
,819

//


 

//



,22




+.+

 

'7

+

+


5

2

"/
 6'7 7

3%

1
0+
0

0

+

5
2
"/
6'7 75
3%
"" '
@ 2>.;,
"" '
@"/.;,

//


//



" 3




+.+




/A/ >237

 -

0
0

 
++

,6

,6
+
?3%

?+

",22

;%"
;%"
;%"
;%"



+1

1
++

;%",
;%",
;%",
;%",
;%",
;%",
;%",

@" 3
@" 3
@" 3
/
/
/

+

+

+


1
+
++
+0

@
,22

@,22

1










0
+.+

!

")

//

<,/
/ @2,22

+

?:

/
/
/



//




 -

+ +
!



 
 

"#$%&






'(



*

PANEL INTERFACE
5

314

314

314

314





5




 
 




7





1









 
 

5


7

1








, 



 




 


 2
 2
 2
 2 
 2














7
1



7
1




5



5




5

 2
 2
 2
 2
 2











2,5

 
 68

 '
 '





6





%!&$

'"$/



1
+

!"#$




 




 


 
 

'()*$+",*-$

$.


 

 

%$$"

(0

MCU

49











49



 







4 

4 

 F

 F



&











0

9 

5&




-&"


4
;
"

0




  268

0

& 

29:;1
29:;:

  268








/


2&

 



0






0

/

.




4
4
4
4
4
40
4
4/
0:4;

.






4 / "
4  
4 <&
;<4
4 B"
4  B"


/







0

&
&



 





0

'
8








"">"
"">;
B"
B"




#%

& 



>"<
>"<

  

6 < < 
#4&<;>0
 

# ;5< 
 E

;

"


49

 
& 

49

  
  

 

268





0

/

.



4
4
4
4
4
40
4
4/

4
5&4 
5&4 
4 
4 0

42<
<&<
5-6
;<
92
;<">
;<">2
;<">-

49

29: 1
29: :


.


/

0





0
/
.






< <



0

/

49
 0

B;







.

/

4
4
4
4
4
40
4
4/

B;



  A

" 

<
4





0.86E

= 
 

9 



  A



0

/

0

/




"
5:" 9 <;<
8>D




 

 0

&

&

49

49

49
 



/





/

/

/

? 

? 

& 

48 .
92 
5-6 
42< 





"
5:" 9 <;<
;<">- &

 

 

 

&

&

&

29:;1
29:;:



0
/
.


0









2& 

;<">;9<
;<">2 &-<

/ ;<">

48 .

8>D
29: 1
29: :



 /
&




;<">2

 .
&

!

"*



/

<&<
;<



.

48 .


? 

.

<

<
<
/ 




;<">-

  
 

"#$%&%'(

)



0

+

#,




Online Support Information

This section describes online technical support services available to help you repair your Acer
Systems.
If you are a distributor, dealer, ASP or TPM, please refer your technical queries to your local
Acer branch office.
Acer Branch Offices and Regional Business Units may access our website. However some
sources will require a user i.d. and password. These can be obtained directly from Acer CSD Taiwan.
Acer's Website offers you convenient and valuable support resources whenever you need them.
In the Technical Information section you can download information on all of Acer's Notebook,
Desktop,Server models including:

  Service
  User's

guides
manuals

  Training
  Bios

updates

  Spare
  TABs

materials

parts lists
(Technical Announcement Bulletin)

For these purposes, we have included an Acrobat File to facilitate the problem-free downloading
of technical material.

Also contained on this website are:


  Detailed

information on Acer's International Traveler's Warranty (ITW)

  Returned

material authorization procedures

  An

overview of all the support services we offer, accompanied by a list of telephone, fax

contacts for all your technical queries.


We are always looking for ways to optimize and improve our services, so if you have any suggestions
comments, please do not hesitate to communicate these to us.

 

Anda mungkin juga menyukai