V100R017
01
Date
2016-09-15
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website:
http://www.huawei.com
Email:
support@huawei.com
Issue 01 (2016-09-15)
PRS
Performance Report Reference
Overview
This section describes the counters and meanings of the predefined report templates of the
PRS.
Product Version
The following table lists the product version related to this document.
Product Name
Product Version
PRS
V100R017
Intended Audience
This document is intended for network planning engineers and network management
engineers.
Change History
01 (2016-09-15)
This issue is the first official release for V100R017C00. Compared with last version, this
issue has no changes.
Draft A (2016-04-07)
This issue is the first release of the V100R017C00 beta version.
Issue 01 (2016-09-15)
ii
PRS
Performance Report Reference
Contents
Contents
About This Document.....................................................................................................................ii
1 ASNGW Performance Report..................................................................................................... 1
1.1 ASNGW NE Report....................................................................................................................................................... 2
iii
PRS
Performance Report Reference
Contents
iv
PRS
Performance Report Reference
Contents
PRS
Performance Report Reference
Contents
vi
PRS
Performance Report Reference
Contents
vii
PRS
Performance Report Reference
Contents
8.2.7.6 Carrier Access Times by Average Pilot Strength TopN Report........................................................................... 418
8.2.8 Mobility Report....................................................................................................................................................... 419
8.2.8.1 Inter-AN Hard Handoff Report.............................................................................................................................419
8.2.8.2 Carrier Inter-AN Hard Handoff Report................................................................................................................ 421
8.2.8.3 Intra-AN Hard Handoff Report............................................................................................................................ 424
8.2.8.4 Intra-AN Hard Handoff Worst Carrier Report......................................................................................................425
8.2.8.5 BSC Mobility KPI Report.................................................................................................................................... 427
8.2.8.6 Inter-BS Soft Handoff Report...............................................................................................................................429
8.2.8.7 Intra-BS Soft Handoff Report...............................................................................................................................431
8.2.8.8 Carrier Intra-BS Soft Handoff Report.................................................................................................................. 433
8.2.8.9 HRPD Session Transfer and Location Update Report..........................................................................................435
8.2.8.10 Carrier Mobility KPI Report...............................................................................................................................436
8.2.9 Resource Utilization Analysis Report..................................................................................................................... 437
8.2.9.1 Forward High Load of Abis Analysis Report.......................................................................................................437
8.2.9.2 BSC CSPU CPU Utilization Report..................................................................................................................... 440
8.2.9.3 BSC Resource Utilization Analysis KPI Report.................................................................................................. 440
8.2.9.4 BTS DO CEResource Utilization Report............................................................................................................. 442
8.2.9.5 BTS DO MacIndex Resource Utilization Report................................................................................................. 443
8.2.9.6 BTS Resource Utilization Analysis KPI Report...................................................................................................445
8.2.9.7 CBTS3606 Rank of BTSs by Reverse Congestion of Abis Report......................................................................446
8.2.9.8 CBTS3606 ABTSs in Desc Order by FER of Abis Link TopN Report............................................................... 447
8.2.9.9 CBTS3606 BTSs by Interruption Duration of Abis Link TopN Report...............................................................448
8.2.9.10 CBTS3900 Rank of BTSs by Reverse Congestion of Abis Report....................................................................449
8.2.9.11 CBTS3900 ABTSs in Desc Order by FER of Abis Link TopN Report............................................................. 450
8.2.9.12 CBTS3900 BTSs by Interruption Duration of Abis Link TopN Report.............................................................451
8.2.9.13 Frame Resource Utilization Analysis KPI Report..............................................................................................452
8.2.9.14 Carrier Resource Utilization Analysis KPI Report.............................................................................................453
8.3 CBSC-DO Performance Report..................................................................................................................................454
8.3.1 Service Integrality Report........................................................................................................................................454
8.3.1.1 Forward and Reverse Transmision Quality Report.............................................................................................. 454
8.3.1.2 DO FTCH Forward RLP Layer Retransmit Ratio Report.................................................................................... 456
8.3.2 Call Holding Report.................................................................................................................................................456
8.3.2.1 Connection Drop Trend Report............................................................................................................................ 457
8.3.3 HRPD Session Report............................................................................................................................................. 457
8.3.3.1 HRPD Session Setup Scale Report.......................................................................................................................457
8.3.3.2 HRPD Session Setup Report................................................................................................................................ 458
8.3.3.3 HRPD Session Setup Release Report................................................................................................................... 460
8.3.3.4 Access Authentication Report.............................................................................................................................. 475
8.3.4 Accessablity Report................................................................................................................................................. 476
8.3.4.1 Connection Setup Success Ratio Trend Report.................................................................................................... 476
8.3.4.2 Connection Setup Failure Reason Report.............................................................................................................477
8.3.4.3 Connection Setup Duration Report.......................................................................................................................479
Issue 01 (2016-09-15)
viii
PRS
Performance Report Reference
Contents
ix
PRS
Performance Report Reference
Contents
PRS
Performance Report Reference
Contents
xi
PRS
Performance Report Reference
Contents
xii
PRS
Performance Report Reference
Contents
xiii
PRS
Performance Report Reference
Contents
xiv
PRS
Performance Report Reference
Contents
xv
PRS
Performance Report Reference
Contents
xvi
PRS
Performance Report Reference
Contents
xvii
PRS
Performance Report Reference
Contents
30.3.4 Iur.........................................................................................................................................................................1177
30.3.4.1 Iur Signaling Plane(ATM)................................................................................................................................ 1177
30.3.4.2 Iur Signaling Plane(IP)..................................................................................................................................... 1178
30.3.4.3 Iur User Plane(ATM)........................................................................................................................................ 1179
30.3.4.4 Iur User Plane(IP)............................................................................................................................................. 1180
30.3.4.5 Iur User Plane(IP POOL)..................................................................................................................................1181
30.3.5 License................................................................................................................................................................. 1183
30.3.5.1 RNC License_Active User(BSC6910UMTS).................................................................................................. 1183
30.3.5.2 RNC License_Active User(BSC6900UMTS).................................................................................................. 1184
30.3.5.3 RNC License_Hardware Capacity(BSC6910UMTS)...................................................................................... 1184
30.3.5.4 RNC License_Hardware Capacity(BSC6900UMTS)...................................................................................... 1185
30.3.5.5 RNC License_HSPA User Number(BSC6910UMTS).....................................................................................1186
30.3.5.6 RNC License_HSPA User Number(BSC6900UMTS).....................................................................................1188
30.3.5.7 RNC License_Traffic(BSC6910UMTS)...........................................................................................................1190
30.3.5.8 RNC License_Traffic(BSC6900UMTS)...........................................................................................................1191
30.3.5.9 RNC License_Traffic(RAN Sharing or MOCN)(BSC6910UMTS).................................................................1192
30.3.5.10 RNC License_Traffic(RAN Sharing or MOCN)(BSC6900UMTS)...............................................................1193
30.3.6 RNC Traffic Model Report(6910UMTS)............................................................................................................ 1194
30.3.7 RNC Traffic Model Report(6900UMTS)............................................................................................................ 1197
30.3.8 RNC Traffic Trend Report(6910UMTS)............................................................................................................. 1200
30.3.9 RNC Traffic Trend Report(6900UMTS)............................................................................................................. 1201
30.3.10 UCell Group Traffic Trend Report.................................................................................................................... 1202
30.4 DPU DSP Utilization Rate of one Physical Subrack..............................................................................................1203
30.5 DPU DSP Utilization Rate of RNC........................................................................................................................ 1204
30.6 EGPU(CP Subsystem Detail Report)..................................................................................................................... 1205
30.7 EGPU(UP Subsystem Detail Report)..................................................................................................................... 1206
30.8 EGPU CP Breakdown Report.................................................................................................................................1207
30.9 MPU CPU Utilization Rate of RNC.......................................................................................................................1210
30.10 Port traffic analysis............................................................................................................................................... 1211
30.11 RTWP Breakdown................................................................................................................................................ 1212
30.12 Breakdown Report................................................................................................................................................ 1213
30.13 SPU CPU Utilization Rate of RNC...................................................................................................................... 1216
30.14 TCP Breakdown................................................................................................................................................... 1217
xviii
PRS
Performance Report Reference
Contents
Issue 01 (2016-09-15)
xix
PRS
Performance Report Reference
Issue 01 (2016-09-15)
PRS
Performance Report Reference
NE Type
ASNGW
Object Type
ASNGW
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
ASNGW
Number of Received
PPP Negotiation
Packets
numb
er
PPPC
Performance
Measuremen
t(WASN977
0)
numb
er
PPPC
Performance
Measuremen
t(WASN977
0)
Number of Received
Invalid PPP
Negotiation Packets
numb
er
PPPC
Performance
Measuremen
t(WASN977
0)
Number of
Successful LCP
Negotiations
times
PPPC
Performance
Measuremen
t(WASN977
0)
Number of LCP
Negotiation
Attempts
times
PPPC
Performance
Measuremen
t(WASN977
0)
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of
Successful IPCP
Negotiations
times
PPPC
Performance
Measuremen
t(WASN977
0)
Number of IPCP
Negotiation
Attempts
times
PPPC
Performance
Measuremen
t(WASN977
0)
Number of
Successful CCP
Negotiations
times
PPPC
Performance
Measuremen
t(WASN977
0)
Number of CCP
Negotiation
Attempts
times
PPPC
Performance
Measuremen
t(WASN977
0)
Number of Received
Stac LZS
Compressed Packets
numb
er
PPPC
Performance
Measuremen
t(WASN977
0)
numb
er
PPPC
Performance
Measuremen
t(WASN977
0)
Number of Received
Microsoft Point-toPoint Compressed
Packets
numb
er
PPPC
Performance
Measuremen
t(WASN977
0)
Number of Sent
Microsoft Point-toPoint Compressed
Packets
numb
er
PPPC
Performance
Measuremen
t(WASN977
0)
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of
Successful PPP
Negotiations
times
PPPC
Performance
Measuremen
t(WASN977
0)
Number of PPP
Negotiation
Attempts
times
PPPC
Performance
Measuremen
t(WASN977
0)
Number of Received
L2TP Control
Packets
numb
er
L2TP
Performance
Measuremen
t(WASN977
0)
Number of Received
Invalid L2TP
Control Packets
numb
er
L2TP
Performance
Measuremen
t(WASN977
0)
Number of Sent
L2TP Control
Packets
numb
er
L2TP
Performance
Measuremen
t(WASN977
0)
Number of L2TP
Tunnel Setup
Attempts
times
L2TP
Performance
Measuremen
t(WASN977
0)
Number of
Successful L2TP
Tunnel Setup Times
times
L2TP
Performance
Measuremen
t(WASN977
0)
Number of L2TP
Session Setup
Attempts
times
L2TP
Performance
Measuremen
t(WASN977
0)
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of
Successful L2TP
Session Setup Times
times
L2TP
Performance
Measuremen
t(WASN977
0)
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Number of Uplink
Packets on the R3
Interface
(WASN9770)
packe
t
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Number of
Downlink Packets
on the R3 Interface
(WASN9770)
packe
t
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Number of Error
Downlink Packets
on the R3 Interface
(WASN9770)
packe
t
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Packet
Throughput on the
R3 Interface
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Maximum Packet
Throughput on the
R3 Interface
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Average Uplink
Packet Rate on the
R3 Interface
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Maximum Uplink
Packet Rate on the
R3 Interface
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Average Downlink
Packet Rate on the
R3 Interface
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Maximum Downlink
Packet Rate on the
R3 Interface
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Number of Uplink
Packets on R4 and
R6 Interfaces
(WASN9770)
packe
t
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Number of
Downlink Packets
on R4 and R6
Interfaces
(WASN9770)
packe
t
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Number of Error
Uplink Packets on
R4 and R6
(WASN9770)
packe
t
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Average Packet
Throughput on R4
and R6 Interfaces
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Maximum Packet
Throughput on R4
and R6 Interfaces
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Average Uplink
Packet Rate on R4
and R6 Interfaces
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Maximum Uplink
Packet Rate on R4
and R6 Interfaces
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Average Downlink
Packet Rate on R4
and R6 Interfaces
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Maximum Downlink
Packet Rate on R4
and R6 Interfaces
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Uplink Packets
Exceeding 1500
Bytes on R4 and R6
(WASN9770)
packe
t
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Downlink Packets
Exceeding 1500
Bytes on R3
(WASN9770)
packe
t
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
kiloby
tes
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Downlink Traffic on
the R3 Interface
(KB) (WASN9770)
kiloby
tes
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
MB
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Downlink Traffic on
the R3 Interface
(MB) (WASN9770)
MB
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Average Throughput
on the R3 Interface
(KB/s) (WASN9770)
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Maximum
Throughput on the
R3 Interface (KB/s)
(WASN9770)
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Average Throughput
on the R3 Interface
(MB/s)
(WASN9770)
mb/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Maximum
Throughput on the
R3 Interface (MB/s)
(WASN9770)
mb/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
10
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Maximum Uplink
Rate on the R3
Interface (KB/s)
(WASN9770)
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Average Downlink
Rate on the R3
Interface (KB/s)
(WASN9770)
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Maximum Downlink
Rate on the R3
Interface (KB/s)
(WASN9770)
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Uplink Traffic on R4
and R6 Interfaces
(KB) (WASN9770)
kiloby
tes
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
11
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Downlink Traffic on
R4 and R6 Interfaces
(KB) (WASN9770)
kiloby
tes
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Uplink Traffic on R4
and R6 Interfaces
(MB) (WASN9770)
MB
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Downlink Traffic on
R4 and R6 Interfaces
(MB) (WASN9770)
MB
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Average Throughput
on R4 and R6
Interfaces (KB/s)
(WASN9770)
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Maximum
Throughput on R4
and R6 Interfaces
(KB/s) (WASN9770)
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
12
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
on R4 and R6
Interfaces (MB/s)
(WASN9770)
mb/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Maximum
Throughput on R4
and R6 Interfaces
(MB/s)
(WASN9770)
mb/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Maximum Uplink
Rate on R4 and R6
Interfaces (KB/s)
(WASN9770)
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Average Downlink
Rate on R4 and R6
Interfaces (KB/s)
(WASN9770)
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
13
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Maximum Downlink
Rate on R4 and R6
Interfaces (KB/s)
(WASN9770)
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Number of Received
EAP-Start Messages
(WASN9770)
packe
t
Authenticati
on
Performance
Measuremen
t
(WASN9770
)
packe
t
Authenticati
on
Performance
Measuremen
t
(WASN9770
)
packe
t
Authenticati
on
Performance
Measuremen
t
(WASN9770
)
Number of
Successful
Authentication
Responses
(WASN9770)
times
Authenticati
on
Performance
Measuremen
t
(WASN9770
)
Number of
Authentication
Requests
(WASN9770)
times
Authenticati
on
Performance
Measuremen
t
(WASN9770
)
14
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Re-sent
Authentication
Requests
(WASN9770)
times
Authenticati
on
Performance
Measuremen
t
(WASN9770
)
numb
er
Authenticati
on
Performance
Measuremen
t
(WASN9770
)
numb
er
Authenticati
on
Performance
Measuremen
t
(WASN9770
)
numb
er
Authenticati
on
Performance
Measuremen
t
(WASN9770
)
numb
er
Authenticati
on
Performance
Measuremen
t
(WASN9770
)
Number of
Successful
Accounting Start
Responses
(WASN9770)
times
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
15
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of
Accounting Start
Requests
(WASN9770)
times
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
Number of Re-sent
Accounting Start
Requests
(WASN9770)
times
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
Number of
Successful InterimUDR Updates
(WASN9770)
times
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
times
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
Number of Re-sent
Interim-UDR
Update Requests
(WASN9770)
times
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
Number of
Successful
Accounting End
Responses
(WASN9770)
times
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
16
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of
Accounting End
Requests
(WASN9770)
numb
er
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
Number of Re-sent
Accounting End
Requests
(WASN9770)
numb
er
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
Number of Sent
Messages Carrying
UDRs (WASN9770)
times
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
Number of
Successfully Sent
Messages Carrying
UDRs (WASN9770)
times
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
Number of UDRs
Waiting to Be Sent
(WASN9770)
numb
er
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
Number of Received
Invalid AAA
Messages
(WASN9770)
times
AAA
Performance
Measuremen
t
(WASN9770
)
17
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of AAA
Link Interruption
Times (WASN9770)
times
AAA
Performance
Measuremen
t
(WASN9770
)
Number of
Activated Service
Flows (WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
Average Number of
Activated Service
Flows (WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
Maximum Number
of Activated Service
Flows (WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
Number of UGS
Service Flows
(WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
Number of ertPS
Service Flows
(WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
Number of rtPS
Service Flows
(WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
18
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of nrtPS
Service Flows
(WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
Number of BE
Service Flows
(WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
Number of Users
with Dynamic IP
Addresses
(WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
Number of Users
with Static IP
Addresses
(WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
Number of DP
Registration
Requests
(WASN9770)
times
Session
Performance
Measuremen
t
(WASN9770
)
Number of
Successful DP
Registration Times
(WASN9770)
times
Session
Performance
Measuremen
t
(WASN9770
)
Number of Re-sent
DP Registration
Requests
(WASN9770)
times
Session
Performance
Measuremen
t
(WASN9770
)
19
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of DP
Deregistration
Requests
(WASN9770)
times
Session
Performance
Measuremen
t
(WASN9770
)
Number of
Successful DP
Deregistration Times
(WASN9770)
times
Session
Performance
Measuremen
t
(WASN9770
)
Number of Re-sent
DP Deregistration
Requests
(WASN9770)
times
Session
Performance
Measuremen
t
(WASN9770
)
Total Online
Duration of Users
(WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
Average Online
Duration of Users
(WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
Number of
Activated Users
(WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
Number of Access
Users (WASN9770)
numb
er
Network
Access
Performance
Measuremen
t
(WASN9770
)
20
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Number of
Access Users
(WASN9770)
numb
er
Network
Access
Performance
Measuremen
t
(WASN9770
)
Maximum Number
of Access Users
(WASN9770)
numb
er
Network
Access
Performance
Measuremen
t
(WASN9770
)
Number of
Registration Updates
(WASN9770)
numb
er
Network
Access
Performance
Measuremen
t
(WASN9770
)
Number of Network
Access Requests
(WASN9770)
times
Network
Access
Performance
Measuremen
t
(WASN9770
)
Number of
Successful Network
Access Times
(WASN9770)
times
Network
Access
Performance
Measuremen
t
(WASN9770
)
Success Rate of
Network Access
(WASN9770)
Network
Access
Performance
Measuremen
t
(WASN9770
)
21
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
times
Network
Access
Performance
Measuremen
t
(WASN9770
)
times
Network
Access
Performance
Measuremen
t
(WASN9770
)
times
Network
Access
Performance
Measuremen
t
(WASN9770
)
Number of Access
Authentication
Negotiation
Requests
(WASN9770)
times
Network
Access
Performance
Measuremen
t
(WASN9770
)
Number of Access
Authentication
Negotiation
Responses
(WASN9770)
times
Network
Access
Performance
Measuremen
t
(WASN9770
)
Number of Access
Capability
Negotiation
Requests
(WASN9770)
times
Network
Access
Performance
Measuremen
t
(WASN9770
)
22
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Access
Capability
Negotiation
Responses
(WASN9770)
times
Network
Access
Performance
Measuremen
t
(WASN9770
)
Number of Sent
Access Negotiation
Responses
(WASN9770)
times
Network
Access
Performance
Measuremen
t
(WASN9770
)
Number of MIP
Users(WASN9770)
numb
er
Network
Access
Performance
Measuremen
t
(WASN9770
)
Number of PPPoE
Users(WASN9770)
numb
er
Network
Access
Performance
Measuremen
t
(WASN9770
)
Number of L2TP
Users(WASN9770)
numb
er
Network
Access
Performance
Measuremen
t
(WASN9770
)
Expiration of BS
Neighbor Parameter
Synchronization
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
23
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Success of Neighbor
Parameter
Synchronization of
BS (WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Success of Spare
Capacity Reporting
of BS (WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Expiration of Spare
Capacity Reporting
of BS (Board)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Idle
Users (WASN9770)
numb
er
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Paging
Initiation Times
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of
Successful Paging
Times (WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Re-sent
Paging Initiation
Times (WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
24
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Paging
Failure Times Due
to No Response
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Paging
Failure Times Due
to Other Reason
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Location
Update Requests
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Location
Update Responses
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Failed
Location Updates
Due to No Response
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Failed
Location Updates
Due to Rejection
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
25
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Failed
Location Updates
Due to Other Reason
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Requests
for Entering Idle
State (WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Times
for Successfully
Entering Idle State
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Failed
Idle-State Entry
Times (Rejected)
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Failed
Idle-State Entry
Times (Other
Reason)
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Requests
for Exiting from Idle
State (WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Times
for Successful IdleState Exit
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
26
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Failed
Idle-State Exit
Times (Rejected)
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Failed
Idle-State Exit
Times (Other
Reason)
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Radio Resource
Configuration
Update Requests
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Radio Resource
Configuration
Update Request
Success
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Radio Resource
Configuration
Update Request
Failure
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Received
Relay Messages
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of
Successfully
Relayed Messages
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
27
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Failures
to Relay Messages
Due to No Next Hop
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Failures
to Relay Messages
Due to R4 Loop
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Failure to Relay
Messages Due to
Mobile Forbidden
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
28
PRS
Performance Report Reference
Issue 01 (2016-09-15)
29
PRS
Performance Report Reference
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
High
Call
Drop
Rate Cell
TCH Availablity(%)
Other
Measuremen
t Function
[Available TCHs]/
([Configured TCHs of
1800/1900 cell]+[Configured
TCHs of 900/850 cell])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Issue 01 (2016-09-15)
30
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
High
Call
Drop
Rate Cell
TCH Availablity(%)
Other
Measuremen
t Function
[Available TCHs]/
([Configured TCHs of
1800/1900 cell]+[Configured
TCHs of 900/850 cell])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
High
Congesti
on Rate
Cell
TCH Congestion
Rate
TCH
Measuremen
t Function
31
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
High
Congesti
on Rate
Cell
TCH Congestion
Rate
TCH
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
32
PRS
Performance Report Reference
NE Type
BSC
Object Type
BSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
Volume
Measure
ment
TCH Traffic
Access
Measuremen
t Function
[Sum of CM service
rejections]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Issue 01 (2016-09-15)
33
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Cell
Performa
nce
Measure
ment
TCH Traffic
Access
Measuremen
t Function
[Sum of CM service
rejections]
TCH Congestion
Rate
TCH
Measuremen
t Function
TCH Availablity(%)
Other
Measuremen
t Function
[Available TCHs]/
([Configured TCHs of
1800/1900 cell]+[Configured
TCHs of 900/850 cell])*{100}
TCH Drop
Rate(with HO)
TCH
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Issue 01 (2016-09-15)
34
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Cell
Performa
nce
Measure
ment
TCH Traffic
Access
Measuremen
t Function
[Sum of CM service
rejections]
TCH Congestion
Rate
TCH
Measuremen
t Function
TCH Availablity(%)
Other
Measuremen
t Function
[Available TCHs]/
([Configured TCHs of
1800/1900 cell]+[Configured
TCHs of 900/850 cell])*{100}
TCH Drop
Rate(with HO)
TCH
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
35
PRS
Performance Report Reference
Issue 01 (2016-09-15)
36
PRS
Performance Report Reference
NE Type
BSC
Object Type
BSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Retainabi
lity
TCH
Measuremen
t Function
TCH
Measuremen
t Function
SDCCH Drop
Rate(%)
SDCCH
Measuremen
t Function
TCH
Measuremen
t Function
37
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Other
Measuremen
t Function
Rate of Traffic
Volume to Call
Drops
none
TCH
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
BSC
Issue 01 (2016-09-15)
38
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Service
Quality
Full Rate
Receiving
Level
Measuremen
t Function
39
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 01 (2016-09-15)
40
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 01 (2016-09-15)
41
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 01 (2016-09-15)
42
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 01 (2016-09-15)
43
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH Downlink
Quality Identifier(%)
Full Rate
Receiving
Level
Measuremen
t Function
44
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 01 (2016-09-15)
45
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 01 (2016-09-15)
46
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 01 (2016-09-15)
47
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Issue 01 (2016-09-15)
48
PRS
Performance Report Reference
Object Type
BSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accessab
ility
Immediate
Assignment Success
Rate(%)
Random
Access
Measuremen
t Function
([Successful immediate
assignments]/[Immediate
assignment requests])*{100}
TCH Assignment
Success Rate(%)
TCH
Measuremen
t Function
TCH Seizures
Success Rate(%)
TCH
Measuremen
t Function
Random
Access
Measuremen
t Function
(([Successful immediate
assignments]/[Immediate
assignment
requests])*([Successful TCH
seizures for call]/[Attempted
TCH seizures for call]))*({1}[SDCCH call drop]/
[Successful SDCCH seizures
(all)])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Issue 01 (2016-09-15)
49
PRS
Performance Report Reference
Object Type
BSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Mobility
IntraBSC Handover
Success Rate(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Attempted
incoming internal inter cell
handovers]+[Attempted
outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
IntraBSC Handover
Success Rate Due to
Radio Reasons(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Incoming
internal inter cell handovers]+
[Outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
OutgoingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell
handovers]/[Attempted
outgoing interBSC inter cell
handovers])*{100}
OutgoingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell
handovers]/[Inter BSC
outgoing cell
handovers])*{100}
IncomingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell
handovers]/[Attempted
incoming interBSC inter cell
handovers])*{100}
50
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
IncomingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell
handovers]/[Inter BSC
incoming cell
handovers])*{100}
Due-band Handover
Success
Rate(900-1800)(%)
Handover
Measuremen
t Function(1)
(([Successful intercell
handovers (900/850>1800/1900)]+[Successful
incoming BSC handovers
(900/850->1800/1900)]+
[Successful outgoing BSC
handovers (900/850>1800/1900)])/([Attempted
intercell handovers (900/850>1800/1900)]+[Attempted
incoming BSC handovers
(900/850->1800/1900)]+
[Attempted outgoing BSC
handovers (900/850>1800/1900)]))*{100}
Due-band Handover
Success
Rate(1800-900)(%)
Handover
Measuremen
t Function(1)
(([Successful intercell
handovers (1800/1900>900/850)]+[Successful
incoming BSC handovers
(1800/1900->900/850)]+
[Successful outgoing BSC
handovers (1800/1900>900/850)])/([Attempted
intercell handovers
(1800/1900->900/850)]+
[Attempted incoming BSC
handovers (1800/1900>900/850)]+[Attempted
outgoing BSC handovers
(1800/1900>900/850)]))*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
51
PRS
Performance Report Reference
NE Type
BSC
Object Type
BSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Availabil
ity
TCH Available
Rate(%)
Other
Measuremen
t Function
[Available TCHs]/
([Configured TCHs of
900/850 cell]+[Configured
TCHs of 1800/1900
cell])*{100}
SDCCH Available
Rate(%)
SDCCH
Measuremen
t Function
([Available SDCCHs]/
[Configured
SDCCHs])*{100}
TCH Attempt
Failure Rate Due to
No TCH
Assignment(%)
TCH
Measuremen
t Function
SDCCH Congestion
Rate(%)
SDCCH
Measuremen
t Function
Erl
TCH
Measuremen
t Function
TCH Traffic
Volume(Erl)
Erl
TCH
Measuremen
t Function
52
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Total HalfRate
Traffic Volume(Erl)
Erl
TCHF/H
Measuremen
t Function(2)
Peak percentage of
CPU occupation(%)
CPU
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Issue 01 (2016-09-15)
53
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Busy
Cell
Erl
TCH
Measuremen
t Function
TCH Traffic
Volume(Erl)
Erl
TCH
Measuremen
t Function
TCH Available
Rate(%)
Other
Measuremen
t Function
[Available TCHs]/
([Configured TCHs of
900/850 cell]+[Configured
TCHs of 1800/1900
cell])*{100}
SDCCH Available
Rate(%)
SDCCH
Measuremen
t Function
([Available SDCCHs]/
[Configured
SDCCHs])*{100}
TCH Congestion
Rate(including
handovers)(%)
TCH
Measuremen
t Function
SDCCH Congestion
Rate(%)
SDCCH
Measuremen
t Function
TCH Attempt
Failure Rate Due to
No TCH
Assignment(%)
TCH
Measuremen
t Function
54
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Total HalfRate
Traffic Volume(Erl)
Erl
TCHF/H
Measuremen
t Function(2)
Immediate
Assignment Success
Rate(%)
Random
Access
Measuremen
t Function
([Successful immediate
assignments]/[Immediate
assignment requests])*{100}
TCH Assignment
Success Rate(%)
TCH
Measuremen
t Function
TCH Seizures
Success Rate(%)
TCH
Measuremen
t Function
Random
Access
Measuremen
t Function
(([Successful immediate
assignments]/[Immediate
assignment
requests])*([Successful TCH
seizures for call]/[Attempted
TCH seizures for call]))*({1}[SDCCH call drop]/
[Successful SDCCH seizures
(all)])*{100}
IntraBSC Handover
Success Rate(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Attempted
incoming internal inter cell
handovers]+[Attempted
outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
IntraBSC Handover
Success Rate Due to
Radio Reasons(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Incoming
internal inter cell handovers]+
[Outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
55
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
OutgoingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell
handovers]/[Attempted
outgoing interBSC inter cell
handovers])*{100}
OutgoingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell
handovers]/[Inter BSC
outgoing cell
handovers])*{100}
IncomingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell
handovers]/[Attempted
incoming interBSC inter cell
handovers])*{100}
IncomingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell
handovers]/[Inter BSC
incoming cell
handovers])*{100}
TCH
Measuremen
t Function
TCH
Measuremen
t Function
SDCCH Drop
Rate(%)
SDCCH
Measuremen
t Function
TCH
Measuremen
t Function
56
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Other
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Idle Cell
Erl
TCH
Measuremen
t Function
57
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH Traffic
Volume(Erl)
Erl
TCH
Measuremen
t Function
TCH Available
Rate(%)
Other
Measuremen
t Function
[Available TCHs]/
([Configured TCHs of
900/850 cell]+[Configured
TCHs of 1800/1900
cell])*{100}
SDCCH Available
Rate(%)
SDCCH
Measuremen
t Function
([Available SDCCHs]/
[Configured
SDCCHs])*{100}
TCH Congestion
Rate(including
handovers)(%)
TCH
Measuremen
t Function
SDCCH Congestion
Rate(%)
SDCCH
Measuremen
t Function
TCH Attempt
Failure Rate Due to
No TCH
Assignment(%)
TCH
Measuremen
t Function
Total HalfRate
Traffic Volume(Erl)
Erl
TCHF/H
Measuremen
t Function(2)
Immediate
Assignment Success
Rate(%)
Random
Access
Measuremen
t Function
([Successful immediate
assignments]/[Immediate
assignment requests])*{100}
58
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH Assignment
Success Rate(%)
TCH
Measuremen
t Function
TCH Seizures
Success Rate(%)
TCH
Measuremen
t Function
Random
Access
Measuremen
t Function
(([Successful immediate
assignments]/[Immediate
assignment
requests])*([Successful TCH
seizures for call]/[Attempted
TCH seizures for call]))*({1}[SDCCH call drop]/
[Successful SDCCH seizures
(all)])*{100}
IntraBSC Handover
Success Rate(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Attempted
incoming internal inter cell
handovers]+[Attempted
outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
IntraBSC Handover
Success Rate Due to
Radio Reasons(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Incoming
internal inter cell handovers]+
[Outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
OutgoingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell
handovers]/[Attempted
outgoing interBSC inter cell
handovers])*{100}
59
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
OutgoingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell
handovers]/[Inter BSC
outgoing cell
handovers])*{100}
IncomingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell
handovers]/[Attempted
incoming interBSC inter cell
handovers])*{100}
IncomingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell
handovers]/[Inter BSC
incoming cell
handovers])*{100}
TCH
Measuremen
t Function
TCH
Measuremen
t Function
SDCCH Drop
Rate(%)
SDCCH
Measuremen
t Function
TCH
Measuremen
t Function
Other
Measuremen
t Function
60
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Hot Cell
TCH Traffic
Volume(Erl)
Erl
TCH
Measuremen
t Function
TCH Available
Rate(%)
Other
Measuremen
t Function
[Available TCHs]/
([Configured TCHs of
900/850 cell]+[Configured
TCHs of 1800/1900
cell])*{100}
SDCCH Available
Rate(%)
SDCCH
Measuremen
t Function
([Available SDCCHs]/
[Configured
SDCCHs])*{100}
61
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH Congestion
Rate(including
handovers)(%)
TCH
Measuremen
t Function
SDCCH Congestion
Rate(%)
SDCCH
Measuremen
t Function
Erl
TCH
Measuremen
t Function
TCH Attempt
Failure Rate Due to
No TCH
Assignment(%)
TCH
Measuremen
t Function
Total HalfRate
Traffic Volume(Erl)
Erl
TCHF/H
Measuremen
t Function(2)
Immediate
Assignment Success
Rate(%)
Random
Access
Measuremen
t Function
([Successful immediate
assignments]/[Immediate
assignment requests])*{100}
TCH Assignment
Success Rate(%)
TCH
Measuremen
t Function
TCH Seizures
Success Rate(%)
TCH
Measuremen
t Function
62
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Random
Access
Measuremen
t Function
(([Successful immediate
assignments]/[Immediate
assignment
requests])*([Successful TCH
seizures for call]/[Attempted
TCH seizures for call]))*({1}[SDCCH call drop]/
[Successful SDCCH seizures
(all)])*{100}
IntraBSC Handover
Success Rate(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Attempted
incoming internal inter cell
handovers]+[Attempted
outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
IntraBSC Handover
Success Rate Due to
Radio Reasons(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Incoming
internal inter cell handovers]+
[Outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
OutgoingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell
handovers]/[Attempted
outgoing interBSC inter cell
handovers])*{100}
OutgoingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell
handovers]/[Inter BSC
outgoing cell
handovers])*{100}
IncomingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell
handovers]/[Attempted
incoming interBSC inter cell
handovers])*{100}
63
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
IncomingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell
handovers]/[Inter BSC
incoming cell
handovers])*{100}
TCH
Measuremen
t Function
TCH
Measuremen
t Function
SDCCH Drop
Rate(%)
SDCCH
Measuremen
t Function
TCH
Measuremen
t Function
Other
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
64
PRS
Performance Report Reference
NE Type
BSC
Object Type
Cell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Worst
Cell
Erl
TCH
Measuremen
t Function
TCH
Measuremen
t Function
TCH Congestion
Rate(including
handovers)(%)
TCH
Measuremen
t Function
TCH Traffic
Volume(Erl)
Erl
TCH
Measuremen
t Function
65
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH Available
Rate(%)
Other
Measuremen
t Function
[Available TCHs]/
([Configured TCHs of
900/850 cell]+[Configured
TCHs of 1800/1900
cell])*{100}
SDCCH Available
Rate(%)
SDCCH
Measuremen
t Function
([Available SDCCHs]/
[Configured
SDCCHs])*{100}
SDCCH Congestion
Rate(%)
SDCCH
Measuremen
t Function
TCH Attempt
Failure Rate Due to
No TCH
Assignment(%)
TCH
Measuremen
t Function
Total HalfRate
Traffic Volume(Erl)
Erl
TCHF/H
Measuremen
t Function(2)
Immediate
Assignment Success
Rate(%)
Random
Access
Measuremen
t Function
([Successful immediate
assignments]/[Immediate
assignment requests])*{100}
TCH Assignment
Success Rate(%)
TCH
Measuremen
t Function
TCH Seizures
Success Rate(%)
TCH
Measuremen
t Function
Random
Access
Measuremen
t Function
(([Successful immediate
assignments]/[Immediate
assignment
requests])*([Successful TCH
seizures for call]/[Attempted
TCH seizures for call]))*({1}[SDCCH call drop]/
[Successful SDCCH seizures
(all)])*{100}
66
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
IntraBSC Handover
Success Rate(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Attempted
incoming internal inter cell
handovers]+[Attempted
outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
IntraBSC Handover
Success Rate Due to
Radio Reasons(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Incoming
internal inter cell handovers]+
[Outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
OutgoingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell
handovers]/[Attempted
outgoing interBSC inter cell
handovers])*{100}
OutgoingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell
handovers]/[Inter BSC
outgoing cell
handovers])*{100}
IncomingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell
handovers]/[Attempted
incoming interBSC inter cell
handovers])*{100}
IncomingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell
handovers]/[Inter BSC
incoming cell
handovers])*{100}
67
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Measuremen
t Function
SDCCH Drop
Rate(%)
SDCCH
Measuremen
t Function
TCH
Measuremen
t Function
Other
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Issue 01 (2016-09-15)
68
PRS
Performance Report Reference
NE Type
BSC
Object Type
Cell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Retainabi
lity
TCH
Measuremen
t Function
TCH
Measuremen
t Function
SDCCH Drop
Rate(%)
SDCCH
Measuremen
t Function
TCH
Measuremen
t Function
Other
Measuremen
t Function
69
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Issue 01 (2016-09-15)
70
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Service
Quality
Full Rate
Receiving
Level
Measuremen
t Function
71
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 01 (2016-09-15)
72
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 01 (2016-09-15)
73
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 01 (2016-09-15)
74
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 01 (2016-09-15)
75
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH Downlink
Quality Identifier(%)
Full Rate
Receiving
Level
Measuremen
t Function
76
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 01 (2016-09-15)
77
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 01 (2016-09-15)
78
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 01 (2016-09-15)
79
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Issue 01 (2016-09-15)
80
PRS
Performance Report Reference
Object Type
Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accessab
ility
Immediate
Assignment Success
Rate(%)
Random
Access
Measuremen
t Function
([Successful immediate
assignments]/[Immediate
assignment requests])*{100}
TCH Assignment
Success Rate(%)
TCH
Measuremen
t Function
TCH Seizures
Success Rate(%)
TCH
Measuremen
t Function
Random
Access
Measuremen
t Function
(([Successful immediate
assignments]/[Immediate
assignment
requests])*([Successful TCH
seizures for call]/[Attempted
TCH seizures for call]))*({1}[SDCCH call drop]/
[Successful SDCCH seizures
(all)])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Issue 01 (2016-09-15)
81
PRS
Performance Report Reference
Object Type
Cell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Mobility
IntraBSC Handover
Success Rate(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Attempted
incoming internal inter cell
handovers]+[Attempted
outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
IntraBSC Handover
Success Rate Due to
Radio Reasons(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Incoming
internal inter cell handovers]+
[Outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
OutgoingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell
handovers]/[Attempted
outgoing interBSC inter cell
handovers])*{100}
OutgoingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell
handovers]/[Inter BSC
outgoing cell
handovers])*{100}
IncomingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell
handovers]/[Attempted
incoming interBSC inter cell
handovers])*{100}
82
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
IncomingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell
handovers]/[Inter BSC
incoming cell
handovers])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Availabil
ity
TCH Available
Rate(%)
Other
Measuremen
t Function
[Available TCHs]/
([Configured TCHs of
900/850 cell]+[Configured
TCHs of 1800/1900
cell])*{100}
SDCCH Available
Rate(%)
SDCCH
Measuremen
t Function
([Available SDCCHs]/
[Configured
SDCCHs])*{100}
83
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH Attempt
Failure Rate Due to
No TCH
Assignment(%)
TCH
Measuremen
t Function
SDCCH Congestion
Rate(%)
SDCCH
Measuremen
t Function
TCH Congestion
Rate(including
handovers)(%)
TCH
Measuremen
t Function
Erl
TCH
Measuremen
t Function
TCH Traffic
Volume(Erl)
Erl
TCH
Measuremen
t Function
Total HalfRate
Traffic Volume(Erl)
Erl
TCHF/H
Measuremen
t Function(2)
84
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
IntraBSC
Handove
r Success
Rate
IntraBSC Handover
Success Rate(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Attempted
incoming internal inter cell
handovers]+[Attempted
outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
85
PRS
Performance Report Reference
Subrep
ort
Name
Outgoing
BSC
Handove
r Success
Rate
Incoming
BSC
Handove
r Success
Rate
Counter
Coun
ter
Unit
Function
Subset
Formula
IntraBSC Handover
Success Rate Due to
Radio Reasons(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Incoming
internal inter cell handovers]+
[Outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
OutgoingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell
handovers]/[Attempted
outgoing interBSC inter cell
handovers])*{100}
OutgoingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell
handovers]/[Inter BSC
outgoing cell
handovers])*{100}
IncomingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell
handovers]/[Attempted
incoming interBSC inter cell
handovers])*{100}
IncomingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell
handovers]/[Inter BSC
incoming cell
handovers])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
86
PRS
Performance Report Reference
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Call
Setup
Success
Rate Due
to BSS
Random
Access
Measuremen
t Function
(([Successful immediate
assignments]/[Immediate
assignment
requests])*([Successful TCH
seizures for call]/[Attempted
TCH seizures for call]))*({1}[SDCCH call drop]/
[Successful SDCCH seizures
(all)])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Issue 01 (2016-09-15)
87
PRS
Performance Report Reference
Object Type
Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SDCCH
Available
Rate
SDCCH Available
Rate(%)
SDCCH
Measuremen
t Function
([Available SDCCHs]/
[Configured
SDCCHs])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SDCCH
Congesti
on Rate
SDCCH Congestion
Rate(%)
SDCCH
Measuremen
t Function
88
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Call
Drop
Rate(incl
uding
handover
s)
TCH
Measuremen
t Function
TCH
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
89
PRS
Performance Report Reference
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Available
Rate
TCH Available
Rate(%)
Other
Measuremen
t Function
[Available TCHs]/
([Configured TCHs of
900/850 cell]+[Configured
TCHs of 1800/1900
cell])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Issue 01 (2016-09-15)
90
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Traffic
Volume
per
Channel(
Max)
Erl
TCH
Measuremen
t Function
TCH
Traffic
Volume
per
Channel(
Min)
Erl
TCH
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Issue 01 (2016-09-15)
91
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Uplink
Quality
Identifier
Full Rate
Receiving
Level
Measuremen
t Function
92
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 01 (2016-09-15)
93
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 01 (2016-09-15)
94
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 01 (2016-09-15)
95
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 01 (2016-09-15)
96
PRS
Performance Report Reference
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Downlin
k Quality
Identifier
TCH Downlink
Quality Identifier(%)
Full Rate
Receiving
Level
Measuremen
t Function
97
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 01 (2016-09-15)
98
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 01 (2016-09-15)
99
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 01 (2016-09-15)
100
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Issue 01 (2016-09-15)
101
PRS
Performance Report Reference
Object Type
Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Attempt
Failure
Rate Due
to No
TCH
Assignm
ent
TCH Attempt
Failure Rate Due to
No TCH
Assignment(%)
TCH
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Issue 01 (2016-09-15)
102
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Seizures
Success
Rate
TCH Seizures
Success Rate(%)
TCH
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Assignm
ent
Success
Rate
TCH Assignment
Success Rate(%)
TCH
Measuremen
t Function
103
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Immediat
e
Assignm
ent
Success
Rate
Immediate
Assignment Success
Rate(%)
Random
Access
Measuremen
t Function
([Successful immediate
assignments]/[Immediate
assignment requests])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
104
PRS
Performance Report Reference
Issue 01 (2016-09-15)
105
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
High
Call
Drop
Rate Cell
TCH Congestion(All
Busy)(%)
Channel
Configuratio
n
Measuremen
t per Cell
([K3020:TCH Seizure
Requests (Signaling Channel)]
+[K3010A:TCH Seizure
Requests (Traffic Channel)]+
[K3010B:TCH Seizure
Requests in TCH Handovers
(Traffic Channel)][CR443B:Completed
Handovers])/([K3020:TCH
Seizure Requests (Signaling
Channel)]+[K3010A:TCH
Seizure Requests (Traffic
Channel)]+[K3010B:TCH
Seizure Requests in TCH
Handovers (Traffic
Channel)])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
106
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
High
Call
Drop
Rate Cell
TCH Congestion(All
Busy)(%)
Channel
Configuratio
n
Measuremen
t per Cell
([K3020:TCH Seizure
Requests (Signaling Channel)]
+[K3010A:TCH Seizure
Requests (Traffic Channel)]+
[K3010B:TCH Seizure
Requests in TCH Handovers
(Traffic Channel)][CR443B:Completed
Handovers])/([K3020:TCH
Seizure Requests (Signaling
Channel)]+[K3010A:TCH
Seizure Requests (Traffic
Channel)]+[K3010B:TCH
Seizure Requests in TCH
Handovers (Traffic
Channel)])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
107
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
High
Congesti
on Rate
Cell
TCH Taffic(Erl)
Erl
KPI
Measuremen
t per Cell
([R3551A:Number of Busy
Traffic Channels (TCHF)
(900/850/810 band)]+
[R3551B:Number of Busy
Traffic Channels (TCHF)
(1800/1900 Band)]+
[R3552A:Number of Busy
Traffic Channels (TCHH)
(900/850/810 band)]+
[R3552B:Number of Busy
Traffic Channels (TCHH)
(1800/1900 Band)])/
[R359:Number of Attempts to
Scan Channel States]
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
108
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
High
Congesti
on Rate
Cell
TCH Taffic(Erl)
Erl
KPI
Measuremen
t per Cell
([R3551A:Number of Busy
Traffic Channels (TCHF)
(900/850/810 band)]+
[R3551B:Number of Busy
Traffic Channels (TCHF)
(1800/1900 Band)]+
[R3552A:Number of Busy
Traffic Channels (TCHH)
(900/850/810 band)]+
[R3552B:Number of Busy
Traffic Channels (TCHH)
(1800/1900 Band)])/
[R359:Number of Attempts to
Scan Channel States]
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
109
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
Volume
Measure
ment
TCH Drop
Rate(with HO)(%)
Channel
State
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
110
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Cell
Performa
nce
Measure
ment
TCH Drop
Rate(with HO)(%)
Channel
State
Measuremen
t per Cell
TCH Taffic(Erl)
Erl
KPI
Measuremen
t per Cell
([R3551A:Number of Busy
Traffic Channels (TCHF)
(900/850/810 band)]+
[R3551B:Number of Busy
Traffic Channels (TCHF)
(1800/1900 Band)]+
[R3552A:Number of Busy
Traffic Channels (TCHH)
(900/850/810 band)]+
[R3552B:Number of Busy
Traffic Channels (TCHH)
(1800/1900 Band)])/
[R359:Number of Attempts to
Scan Channel States]
111
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH Congestion(All
Busy)(%)
Channel
Configuratio
n
Measuremen
t per Cell
([K3020:TCH Seizure
Requests (Signaling Channel)]
+[K3010A:TCH Seizure
Requests (Traffic Channel)]+
[K3010B:TCH Seizure
Requests in TCH Handovers
(Traffic Channel)][CR443B:Completed
Handovers])/([K3020:TCH
Seizure Requests (Signaling
Channel)]+[K3010A:TCH
Seizure Requests (Traffic
Channel)]+[K3010B:TCH
Seizure Requests in TCH
Handovers (Traffic
Channel)])*{100}
TCH availability(%)
Call Drop
Measuremen
t per Cell
{100}*[CR3027:Mean
Number of Available
Channels (TCHF)]/
[CR301B:Mean Number of
Dynamically Configured
Channels (TCH)]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Issue 01 (2016-09-15)
112
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Cell
Performa
nce
Measure
ment
TCH Drop
Rate(with HO)(%)
Channel
State
Measuremen
t per Cell
TCH Taffic(Erl)
Erl
KPI
Measuremen
t per Cell
([R3551A:Number of Busy
Traffic Channels (TCHF)
(900/850/810 band)]+
[R3551B:Number of Busy
Traffic Channels (TCHF)
(1800/1900 Band)]+
[R3552A:Number of Busy
Traffic Channels (TCHH)
(900/850/810 band)]+
[R3552B:Number of Busy
Traffic Channels (TCHH)
(1800/1900 Band)])/
[R359:Number of Attempts to
Scan Channel States]
TCH Congestion(All
Busy)(%)
Channel
Configuratio
n
Measuremen
t per Cell
([K3020:TCH Seizure
Requests (Signaling Channel)]
+[K3010A:TCH Seizure
Requests (Traffic Channel)]+
[K3010B:TCH Seizure
Requests in TCH Handovers
(Traffic Channel)][CR443B:Completed
Handovers])/([K3020:TCH
Seizure Requests (Signaling
Channel)]+[K3010A:TCH
Seizure Requests (Traffic
Channel)]+[K3010B:TCH
Seizure Requests in TCH
Handovers (Traffic
Channel)])*{100}
TCH availability(%)
Call Drop
Measuremen
t per Cell
{100}*[CR3027:Mean
Number of Available
Channels (TCHF)]/
[CR301B:Mean Number of
Dynamically Configured
Channels (TCH)]
113
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
114
PRS
Performance Report Reference
Issue 01 (2016-09-15)
115
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
LOGIC PORT
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
LGCPRT
MEAN
TXRATE
T7507:Average
Transmit Rate of
Logical Port
kbit/s
Logical Port
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Issue 01 (2016-09-15)
116
PRS
Performance Report Reference
Object Type
MLPPP
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
MLPPP
TXMEA
NSPEED
T7313:Mean
Transmit Rate of an
MP Group
kbit/s
MP Group
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
PPP
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PPP
TXMEA
NSPEED
T7358:Average
Transmit Rate of a
PPP Link
kbit/s
PPP Link
Measuremen
t
117
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BSC
LCLS
USER
RATE
Call Drop
Measuremen
t per BSC
[R3830:Number of Successful
BSC local switching
Attempts]/([M318:Successful
Connections (TCHF) (Traffic
Channel)]+[M328:Successful
Connections (TCHH) (Traffic
Channel)])
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
118
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
BTS
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SITE CS
USED
TS
RATE
T66001:Timeslot
Utilization Rate of
CS Service In a BTS
none
Utilization of
BTS
Timeslots
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GBSC
Issue 01 (2016-09-15)
119
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SITE
LCLS
USER
RATE
Local Switch
Measuremen
t per Cell
([M318:Successful
Connections (TCHF) (Traffic
Channel)]+[M328:Successful
Connections (TCHH) (Traffic
Channel)])/[R3831:Number of
Successful BTS local
switching Attempts]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Issue 01 (2016-09-15)
120
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS
Performa
nce KPI
RR370:Congestion
Rate on SDCCH per
CELL (due to Busy)
Channel
Assignment
Failure
Measuremen
t per Cell
K3045:Congestion
Rate on TCH (All
Channels Busy)
KPI
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS
Performa
nce KPI
A9513:Successful
Uplink Assignment
Rate
none
Packet
Assignment
Capability
Measuremen
t
121
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
A9514:Successful
Downlink
Assignment Rate
none
Packet
Assignment
Capability
Measuremen
t
Uplink TBF
Congestion Rate
none
Uplink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9003:Number of Failed
Uplink GPRS TBF
Establishments due to No
Channel]+[A9203:Number of
Failed Uplink EGPRS TBF
Establishments due to No
Channel])/([A9001:Number of
Uplink GPRS TBF
Establishment Attempts]+
[A9201:Number of Uplink
EGPRS TBF Establishment
Attempts])*{100}
Downlink TBF
Congestion Rate
none
Downlink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9103:Number of Failed
Downlink GPRS TBF
Establishments due to No
Channel]+[A9303:Number of
Failed Downlink EGPRS TBF
Establishments due to No
Channel])/([A9101:Number of
Downlink GPRS TBF
Establishment Attempts]+
[A9301:Number of Downlink
EGPRS TBF Establishment
Attempts])*{100}
122
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
none
Uplink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9006:Number of Uplink
GPRS TBF Abnormal
Releases due to N3101
Overflow (MS No Response)]
+[A9007:Number of Uplink
GPRS TBF Abnormal
Releases due to N3103
Overflow (MS No Response)]
+[A9206:Number of Uplink
EGPRS TBF Abnormal
Releases due to N3101
Overflow (MS No Response)]
+[A9207:Number of Uplink
EGPRS TBF Abnormal
Releases due to N3103
Overflow (MS No
Response)])/([A9002:Number
of Successful Uplink GPRS
TBF Establishments]+
[A9202:Number of Successful
Uplink EGPRS TBF
Establishments])*{100}
none
Downlink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9118:Number of Downlink
GPRS Intermit Transfers]+
[A9318:Number of Downlink
EGPRS Intermit Transfers])/
([A9102:Number of
Successful Downlink GPRS
TBF Establishments]+
[A9302:Number of Successful
Downlink EGPRS TBF
Establishments])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Issue 01 (2016-09-15)
123
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PDCHs
Occupied
by
Downlin
k TBF
Average Number of
TCHs Occupied by
EGPRS PDCH
numb
er
PDCH
Resource
Capability
Measuremen
t
[AR9321:Average Number of
Occupied Static EGPRS
PDCHs]+[AR9323:Average
Number of Occupied Dynamic
EGPRS PDCHs]
AR9319:Average
Number of Occupied
GPRS PDCHs
none
PDCH
Resource
Capability
Measuremen
t
AR9379:Average
Number of
Concurrent
Downlink EGPRS
TBFs on EGPRS
PDCH
none
PDCH
Resource
Capability
Measuremen
t
AR9375:Average
Number of
Concurrent
Downlink GPRS
TBFs on EGPRS
PDCH
none
PDCH
Resource
Capability
Measuremen
t
Average Number of
Concurrent
Downlink TBFs on
per EGPRS PDCH
numb
er
PDCH
Resource
Capability
Measuremen
t
[AR9379:Average Number of
Concurrent Downlink EGPRS
TBFs on EGPRS PDCH]+
[AR9375:Average Number of
Concurrent Downlink GPRS
TBFs on EGPRS PDCH]
124
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
AR9371:Average
Number of
Concurrent
Downlink GPRS
TBFs on GPRS
PDCH
none
PDCH
Resource
Capability
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PDCHs
Occupied
by
Uplink
TBF
Average Number of
TCHs Occupied by
EGPRS PDCH
numb
er
PDCH
Resource
Capability
Measuremen
t
[AR9321:Average Number of
Occupied Static EGPRS
PDCHs]+[AR9323:Average
Number of Occupied Dynamic
EGPRS PDCHs]
125
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
AR9319:Average
Number of Occupied
GPRS PDCHs
none
PDCH
Resource
Capability
Measuremen
t
AR9377:Average
Number of
Concurrent Uplink
EGPRS TBFs on
EGPRS PDCH
none
PDCH
Resource
Capability
Measuremen
t
AR9373:Average
Number of
Concurrent Uplink
GPRS TBFs on
EGPRS PDCH
none
PDCH
Resource
Capability
Measuremen
t
Average Number of
Concurrent Uplink
TBFs on per EGPRS
PDCH
numb
er
PDCH
Resource
Capability
Measuremen
t
[AR9377:Average Number of
Concurrent Uplink EGPRS
TBFs on EGPRS PDCH]+
[AR9373:Average Number of
Concurrent Uplink GPRS
TBFs on EGPRS PDCH]
AR9369:Average
Number of
Concurrent Uplink
GPRS TBFs on
GPRS PDCH
none
PDCH
Resource
Capability
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
126
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Paging
Performa
nce
A330:Delivered
Paging Messages for
CS Service
none
Abis
Interface
Paging
Measuremen
t per Cell
A331:Delivered
Paging Messages for
PS Service
none
Abis
Interface
Paging
Measuremen
t per Cell
A338:Number of
Expiries of the
Paging for CS
Services on the PCH
none
Abis
Interface
Paging
Measuremen
t per Cell
A340:Number of
Expiries of the
Paging for PS
Services on the PCH
none
Abis
Interface
Paging
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
127
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TBF
Assignm
ent
ZA9503:Number of
Uplink PS
Immediate
Assignments per
BSC
none
Packet
Assignment
Capability
Measuremen
t per BSC
ZA9505:Number of
Uplink Assignments
on PACCH per BSC
none
Packet
Assignment
Capability
Measuremen
t per BSC
ZA9509:Number of
Downlink PS
Immediate
Assignments per
BSC
none
Packet
Assignment
Capability
Measuremen
t per BSC
ZA9511:Number of
Downlink
Assignments on
PACCH per BSC
none
Packet
Assignment
Capability
Measuremen
t per BSC
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Issue 01 (2016-09-15)
128
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PDCH
Through
put
Average Throughput
of Uplink GPRS
RLC per
PDCH(kbps)
none
Uplink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9006:Number of Valid
Uplink RLC Data Blocks
Using CS1]*{23}+
[L9007:Number of Valid
Uplink RLC Data Blocks
Using CS2]*{34}+
[L9008:Number of Valid
Uplink RLC Data Blocks
Using CS3]*{40}+
[L9009:Number of Valid
Uplink RLC Data Blocks
Using CS4]*{54})*{8}/
({1024}*[L9001:Total
Number of Uplink GPRS RLC
Data Blocks]*{20}/{1000})
Average Throughput
of Downlink GPRS
RLC per
PDCH(kbps)
none
Downlink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9106:Total Number of
Valid RLC Downlink Data
Blocks Using CS1]*{23}+
[L9107:Total Number of Valid
RLC Downlink Data Blocks
Using CS2]*{34}+
[L9108:Total Number of Valid
RLC Downlink Data Blocks
Using CS3]*{40}+
[L9109:Total Number of Valid
RLC Downlink Data Block
Using CS4]*{54})*{8}/
({1024}*[L9101:Total
Number of Downlink GPRS
RLC Data Blocks]*{20}/
{1000})
129
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Uplink EGPRS
RLC per
PDCH(kbps)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
(([L9211:Total Number of
Valid Uplink EGPRS MCS1
RLC Data Blocks]*{22}+
[L9212:Total Number of Valid
Uplink EGPRS MCS2 RLC
Data Blocks]*{28}+
[L9213:Total Number of Valid
Uplink EGPRS MCS3 RLC
Data Blocks]*{37}+
[L9214:Total Number of Valid
Uplink EGPRS MCS4 RLC
Data Blocks]*{44}+
[L9215:Total Number of Valid
Uplink EGPRS MCS5 RLC
Data Blocks]*{56}+
[L9216:Total Number of Valid
Uplink EGPRS MCS6 RLC
Data Blocks]*{74}+
[L9217:Total Number of Valid
Uplink EGPRS MCS7 RLC
Data Blocks]*{56}+
[L9218:Total Number of Valid
Uplink EGPRS MCS8 RLC
Data Blocks]*{68}+
[L9219:Total Number of Valid
Uplink EGPRS MCS9 RLC
Data Blocks]*{74})*{8})/
(({1024}*([L9202:Total
Number of Uplink EGPRS
MCS1 RLC Data Blocks]+
[L9203:Total Number of
Uplink EGPRS MCS2 RLC
Data Blocks]+[L9204:Total
Number of Uplink EGPRS
MCS3 RLC Data Blocks]+
[L9205:Total Number of
Uplink EGPRS MCS4 RLC
Data Blocks]+[L9206:Total
Number of Uplink EGPRS
MCS5 RLC Data Blocks]+
[L9207:Total Number of
Uplink EGPRS MCS6 RLC
Data Blocks]+[L9208:Total
Number of Uplink EGPRS
MCS7 RLC Data Blocks]/
{2}+[L9209:Total Number of
Uplink EGPRS MCS8 RLC
Data Blocks]/{2}+
130
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[L9210:Total Number of
Uplink EGPRS MCS9 RLC
Data Blocks]/{2})*{20}/
{1000}))
Issue 01 (2016-09-15)
131
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Downlink EGPRS
RLC per
PDCH(kbps)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
(([L9311:Total Number of
Valid Downlink EGPRS
MCS1 RLC Data
Blocks]*{22}+[L9312:Total
Number of Valid Downlink
EGPRS MCS2 RLC Data
Blocks]*{28}+[L9313:Total
Number of Valid Downlink
EGPRS MCS3 RLC Data
Blocks]*{37}+[L9314:Total
Number of Valid Downlink
EGPRS MCS4 RLC Data
Blocks]*{44}+[L9315:Total
Number of Valid Downlink
EGPRS MCS5 RLC Data
Blocks]*{56}+[L9316:Total
Number of Valid Downlink
EGPRS MCS6 RLC Data
Blocks]*{74}+[L9317:Total
Number of Valid Downlink
EGPRS MCS7 RLC Data
Blocks]*{56}+[L9318:Total
Number of Valid Downlink
EGPRS MCS8 RLC Data
Blocks]*{68}+[L9319:Total
Number of Valid Downlink
EGPRS MCS9 RLC Data
Blocks]*{74})*{8})/
(({1024}*([L9302:Total
Number of Downlink EGPRS
MCS1 RLC Data Blocks]+
[L9303:Total Number of
Downlink EGPRS MCS2
RLC Data Blocks]+
[L9304:Total Number of
Downlink EGPRS MCS3
RLC Data Blocks]+
[L9305:Total Number of
Downlink EGPRS MCS4
RLC Data Blocks]+
[L9306:Total Number of
Downlink EGPRS MCS5
RLC Data Blocks]+
[L9307:Total Number of
Downlink EGPRS MCS6
RLC data blocks]+
[L9308:Total Number of
Downlink EGPRS MCS7
132
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Subscrib
er
Through
put
AL9529:Downlink
Throughput of
GPRS Users LLC
PDU
kbit/s
Downlink
LLC Data
Transfer
Capability
Measuremen
t
133
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
AL9530:Downlink
Throughput of
EGPRS Users LLC
PDU
kbit/s
Downlink
LLC Data
Transfer
Capability
Measuremen
t
AL9425:Uplink
Throughput of
GPRS Users LLC
PDU
kbit/s
Uplink LLC
Data
Transfer
Capability
Measuremen
t
AL9426:Uplink
Throughput of
EGPRS Users LLC
PDU
kbit/s
Uplink LLC
Data
Transfer
Capability
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Issue 01 (2016-09-15)
134
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Handset
Type
Influence
to
VAMOS
analysis
VAMOS Traffic
Valume Ratio[%]
Channel
State
Measuremen
t per Cell
[R3501:Mean Number of
Busy Channels (VAMOS
TCHH)]/([K3014:Traffic
Volume on TCH]*{2})
Calls Supporting
SAIC Ratio[%]
Measuremen
t of MS
Capability
per Cell
[A03628:Number of Calls
Originated or Terminated by
MSs Supporting SAIC]/
[A03640:Number of Calls]
Calls Supporting
VAMOS-1 Ratio[%]
Measuremen
t of MS
Capability
per Cell
[A03641:Number of
VAMOS-1 Calls]/
[A03640:Number of Calls]
Calls Supporting
VAMOS-2 Ratio[%]
Measuremen
t of MS
Capability
per Cell
[A03642:Number of
VAMOS-2 Calls]/
[A03640:Number of Calls]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Issue 01 (2016-09-15)
135
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VAMOS
Call
Drop
Ratio
Analysis
VAMOS CALL
Drop
Ratio(Demultiplexin
g)
VAMOS Call
Measuremen
t for Cell
[H3061:Number of VAMOS
Call Drops (Demultiplexing
Handover)]/
((([A3100M:Number of
VAMOS Channel
Multiplexing Commands
(Assignment)][A3100N:Number of Failed
VAMOS Channel
Multiplexing Attempts
(Assignment)])+
([H3052:Number of VAMOS
Channel Multiplexing
Commands (Intra-Cell
Handover)]-[H3053:Number
of Failed VAMOS Channel
Multiplexing Attempts (IntraCell
Handover)]))*{2})*{100}
VAMOS CALL
Drop Ratio(Others)
VAMOS Call
Measuremen
t for Cell
[H3062:Number of VAMOS
Call Drops (Other Handover)]/
((([A3100M:Number of
VAMOS Channel
Multiplexing Commands
(Assignment)][A3100N:Number of Failed
VAMOS Channel
Multiplexing Attempts
(Assignment)])+
([H3052:Number of VAMOS
Channel Multiplexing
Commands (Intra-Cell
Handover)]-[H3053:Number
of Failed VAMOS Channel
Multiplexing Attempts (IntraCell
Handover)]))*{2})*{100}
136
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VAMOS CALL
Drop Ratio(Stable
State)
VAMOS Call
Measuremen
t for Cell
[H3063:Number of VAMOS
Call Drops (Stable State)]/
((([A3100M:Number of
VAMOS Channel
Multiplexing Commands
(Assignment)][A3100N:Number of Failed
VAMOS Channel
Multiplexing Attempts
(Assignment)])+
([H3052:Number of VAMOS
Channel Multiplexing
Commands (Intra-Cell
Handover)]-[H3053:Number
of Failed VAMOS Channel
Multiplexing Attempts (IntraCell
Handover)]))*{2})*{100}
VAMOS CALL
Drop Times Ratio
VAMOS Call
Measuremen
t for Cell
([H3061:Number of VAMOS
Call Drops (Demultiplexing
Handover)]+[H3062:Number
of VAMOS Call Drops (Other
Handover)]+([H3063:Number
of VAMOS Call Drops (Stable
State)]/((([A3100M:Number
of VAMOS Channel
Multiplexing Commands
(Assignment)][A3100N:Number of Failed
VAMOS Channel
Multiplexing Attempts
(Assignment)])+
([H3052:Number of VAMOS
Channel Multiplexing
Commands (Intra-Cell
Handover)]-[H3053:Number
of Failed VAMOS Channel
Multiplexing Attempts (IntraCell
Handover)]))*{2})*{100}))/
([CM33:Call Drops on Traffic
Channel]*{2})*{100}
137
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VAMOS
Influence
to
Network
Total
Performa
nce
Analysis
K3014:Traffic
Volume on TCH
Erl
KPI
Measuremen
t per Cell
VAMOS Traffic
Valume Ratio[%]
Channel
State
Measuremen
t per Cell
[R3501:Mean Number of
Busy Channels (VAMOS
TCHH)]/([K3014:Traffic
Volume on TCH]*{2})
K3045:Congestion
Rate on TCH (All
Channels Busy)
KPI
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per
cell(including
Handover)
Call Drop
Measuremen
t per Cell
RH303C:Intra-BSC
Radio Handover
Success Rate
Intra-cell
Handover
Measuremen
t per Cell
138
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VAMOS
Radio
Handove
r Success
Ratio
Analysis
Successful Ratio
Radio Handover by
VAMOS Channel
Multiplexing
VAMOS Call
Measuremen
t for Cell
[H3052:Number of VAMOS
Channel Multiplexing
Commands (Intra-Cell
Handover)]/([H3052:Number
of VAMOS Channel
Multiplexing Commands
(Intra-Cell Handover)][H3053:Number of Failed
VAMOS Channel
Multiplexing Attempts (IntraCell Handover)])*{100}
Successful Ratio
Radio Handover by
VAMOS Channel
Demultiplexing
VAMOS Call
Measuremen
t for Cell
[H3056:Number of VAMOS
Call Handover Commands
(Demultiplexing)]/
([H3056:Number of VAMOS
Call Handover Commands
(Demultiplexing)][H3059:Number of VAMOS
Call Handover Commands
(Others)])*{100}
139
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Successful Ratio
Radio
Handover(Other
VAMOS Call)
VAMOS Call
Measuremen
t for Cell
[H3059:Number of VAMOS
Call Handover Commands
(Others)]/([H3060:Number of
Failed VAMOS Call Handover
Attempts (Others)][H3060:Number of Failed
VAMOS Call Handover
Attempts (Others)])*{100}
RH303C:Intra-BSC
Radio Handover
Success Rate
Intra-cell
Handover
Measuremen
t per Cell
Unsuccessful Vamos
Call Handovers
Ratio
VAMOS Call
Measuremen
t for Cell
([H3053:Number of Failed
VAMOS Channel
Multiplexing Attempts (IntraCell Handover)]+
[H3059:Number of VAMOS
Call Handover Commands
(Others)]+[H3060:Number of
Failed VAMOS Call Handover
Attempts (Others)])/
(([CH301:Internal Intra-Cell
Handover Commands][CH303:Successful Internal
Intra-Cell Handovers])+
([CH321:Number of Incoming
Internal Inter-Cell Handover
Responses]-[CH323:Number
of Successful Incoming
Internal Inter-Cell
Handovers]))*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
140
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS
Accessab
lity KPI
RA303G:Success
Rate of Immediate
Assignments
Immediate
Assignment
Measuremen
t per Cell
RR370:Congestion
Rate on SDCCH per
CELL (due to Busy)
Channel
Assignment
Failure
Measuremen
t per Cell
ZTR104C:Call Drop
Rate on SDCCH
Call Drop
Measuremen
t per Cell
Assignment Success
Rate
none
Assignment
Measuremen
t per Cell
[CA313:Successful
Assignments]/
[CA310:Assignment
Requests]*{100}
K3041:TCH
Congestion Rate
(Overflow)
KPI
Measuremen
t per Cell
K3043:TCH Seizure
Success Rate
KPI
Measuremen
t per Cell
141
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
none
Assignment
Measuremen
t per Cell
([CA313:Successful
Assignments]([A3100K:Assignment
Requests (Signaling Channel)
(SDCCH)]+
[A3100A:Assignment
Requests (Signaling Channel)
(TCH)]-[A312S:Failed
Assignments (Signaling
Channel)]+
[CA310A:Assignment
Requests (TCH Assigned
Repeatedly over A Interface)][CA312A:Failed Assignments
(TCH Assigned Repeatedly
over A Interface)]))/
([A3039J:SDCCH Seizures
for Speech Service]+
[A301F:TCHF Seizures for
Speech Service]+
[A301HH:TCHH Seizures for
Speech Service])*{100}
BSS Call
Establishment
Success Rate
none
Immediate
Assignment
Measuremen
t per Cell
((([CA303J:Call Setup
Indications (Circuit
Service)])*{100}/
([CA300J:Channel Requests
(Circuit Service)]))/
{100})*((([CA313:Successful
Assignments])*{100}/
([CA310:Assignment
Requests]))/{100})*({1}((([CM30:Call Drops on
SDCCH])*{100}/
([K3003:Successful SDCCH
Seizures]))/{100}))*{100}
OVERLOAD rate of
paging
none
Flow Control
Measuremen
t per Cell
([L3188C:MSG CCCH
LOAD IND (PCH) Messages
Sent on Abis Interface (CS
Service)]+[L3188D:MSG
CCCH LOAD IND (PCH)
Messages Sent on Abis
Interface (PS Service)])/
([A330:Delivered Paging
Messages for CS Service]+
[A331:Delivered Paging
Messages for PS
Service])*{100}
142
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS
Retainabi
lity KPI
ZTR304:Call Drop
Rate on TCH per
cell(including
Handover)
Call Drop
Measuremen
t per Cell
ZTR304A:Call Drop
Rate on TCH per
cell(Excluding
Handover)
Call Drop
Measuremen
t per Cell
none
KPI
Measuremen
t per Cell
{60}*[K3014:Traffic Volume
on TCH]/[CM33:Call Drops
on Traffic Channel]*{100}
RM333:Radio Drop
Rate of TCH
Call Drop
Measuremen
t per Cell
RH333:Handover
Drop Rate of TCH
Intra-cell
Handover
Measuremen
t per Cell
RH303:Handover
Success Rate
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303A:Success
Rate of Radio
Handover
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303B:Intra-BSC
Handover Success
Rate
Intra-cell
Handover
Measuremen
t per Cell
RH303C:Intra-BSC
Radio Handover
Success Rate
Intra-cell
Handover
Measuremen
t per Cell
CS
Mobility
KPI
Issue 01 (2016-09-15)
143
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
TH343:Success Rate
of Incoming
External Inter-Cell
Handovers
Incoming
External
Inter-Cell
Handover
Measuremen
t per Cell
RH303D:Success
Rate of Incoming
External Inter-Cell
Radio Handovers
Incoming
External
Inter-Cell
Handover
Measuremen
t per Cell
TH333:Success Rate
of Outgoing
External Inter-Cell
Handovers
Outgoing
External
Inter-Cell
Handover
Measuremen
t per Cell
RH303E:Success
Rate of External
Outgoing Cell Radio
Handovers
Outgoing
External
Inter-Cell
Handover
Measuremen
t per Cell
144
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Success Rate of
Dual-Band
Handovers (900M/
850M-1800M/
1900M)(V2)
none
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
(([RH3031G:Incoming
Internal Inter-Cell Handover
Requests
(900/850/810-1800/1900)]+
[RH3033G:Incoming External
Inter-Cell Handover Requests
(900/850/810-1800/1900)]+
[RH3035G:Outgoing External
Inter-Cell Handover Requests
(900/850/810-1800/1900)])([RH3031F:Failed Incoming
Internal Inter-Cell Handovers
(900/850/810-1800/1900)]+
[RH3033F:Failed Incoming
External Inter-Cell Handovers
(900/850/810-1800/1900)]+
[RH3035F:Failed Outgoing
External Inter-Cell Handovers
(900/850/810-1800/1900)]))/
([RH3031G:Incoming Internal
Inter-Cell Handover Requests
(900/850/810-1800/1900)]+
[RH3033G:Incoming External
Inter-Cell Handover Requests
(900/850/810-1800/1900)]+
[RH3035G:Outgoing External
Inter-Cell Handover Requests
(900/850/810-1800/1900)])*{
100}
145
PRS
Performance Report Reference
Subrep
ort
Name
CS
Resource
Usage
Ratio
KPI
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Success Rate of
Dual-Band
Handovers (1800M/
1900M-900M/
850M)(V2)
none
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
(([RH3032G:Incoming
Internal Inter-Cell Handover
Requests
(1800/1900-900/850/810)]+
[RH3034G:Incoming External
Inter-Cell Handover Requests
(1800/1900-900/850/810)]+
[RH3036G:Outgoing External
Inter-Cell Handover Requests
(1800/1900-900/850/810)])([RH3032F:Failed Incoming
Internal Inter-Cell Handovers
(1800/1900-900/850/810)]+
[RH3034F:Failed Incoming
External Inter-Cell Handovers
(1800/1900-900/850/810)]+
[RH3036F:Failed Outgoing
External Inter-Cell Handovers
(1800/1900-900/850/810)]))/
([RH3032G:Incoming Internal
Inter-Cell Handover Requests
(1800/1900-900/850/810)]+
[RH3034G:Incoming External
Inter-Cell Handover Requests
(1800/1900-900/850/810)]+
[RH3036G:Outgoing External
Inter-Cell Handover Requests
(1800/1900-900/850/810)])*{
100}
Traffic Volume on
TCH(V2)
none
KPI
Measuremen
t per Cell
[K3014:Traffic Volume on
TCH]
TCHH Traffic
Volume(V2)
none
KPI
Measuremen
t per Cell
[K3034:TCHH Traffic
Volume]
Traffic Volume on
SDCCH(V2)
none
KPI
Measuremen
t per Cell
[K3004:Traffic Volume on
SDCCH]
146
PRS
Performance Report Reference
Subrep
ort
Name
PS
Accessab
lity KPI
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Availability(V2)
none
Channel
Configuratio
n
Measuremen
t per Cell
([CR3027:Mean Number of
Available Channels (TCHF)]+
[CR3028:Mean Number of
Available Channels (TCHH)])/
([CR3017:Mean Number of
Dynamically Configured
Channels (TCHF)]+
[CR3018:Mean Number of
Dynamically Configured
Channels (TCHH)])*{100}
SDCCH
Availability(V2)
none
Channel
Configuratio
n
Measuremen
t per Cell
[CR3020:Mean Number of
Available Channels
(SDCCH)]/[CR3010:Mean
Number of Dynamically
Configured Channels
(SDCCH)]*{100}
RK3255:TRX
Usability
KPI
Measuremen
t per Cell
Successful Uplink
Assignment Rate
none
Packet
Assignment
Capability
Measuremen
t
[A9502:Number of Successful
Uplink Assignments]/
[A9501:Number of Uplink
Assignments]*{100}
Successful
Downlink
Assignment Rate
none
Packet
Assignment
Capability
Measuremen
t
[A9508:Number of Successful
Downlink Assignments]/
[A9507:Number of Downlink
Assignments]*{100}
Uplink TBF
Establishment
Success Rate
none
Uplink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9002:Number of
Successful Uplink GPRS TBF
Establishments]+
[A9202:Number of Successful
Uplink EGPRS TBF
Establishments])/
([A9001:Number of Uplink
GPRS TBF Establishment
Attempts]+[A9201:Number of
Uplink EGPRS TBF
Establishment
Attempts])*{100}
147
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Downlink TBF
Establishment
Success Rate
none
Downlink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9102:Number of
Successful Downlink GPRS
TBF Establishments]+
[A9302:Number of Successful
Downlink EGPRS TBF
Establishments])/
([A9101:Number of Downlink
GPRS TBF Establishment
Attempts]+[A9301:Number of
Downlink EGPRS TBF
Establishment
Attempts])*{100}
Uplink EGPRS
Establishment
Success Rate
none
Uplink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
[A9202:Number of Successful
Uplink EGPRS TBF
Establishments]/
[A9201:Number of Uplink
EGPRS TBF Establishment
Attempts]*{100}
Downlink EGPRS
Establishment
Success Rate
none
Downlink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
[A9302:Number of Successful
Downlink EGPRS TBF
Establishments]/
[A9301:Number of Downlink
EGPRS TBF Establishment
Attempts]*{100}
Uplink TBF
Congestion Rate
none
Uplink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9003:Number of Failed
Uplink GPRS TBF
Establishments due to No
Channel]+[A9203:Number of
Failed Uplink EGPRS TBF
Establishments due to No
Channel])/([A9001:Number of
Uplink GPRS TBF
Establishment Attempts]+
[A9201:Number of Uplink
EGPRS TBF Establishment
Attempts])*{100}
148
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Downlink TBF
Congestion Rate
none
Downlink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9103:Number of Failed
Downlink GPRS TBF
Establishments due to No
Channel]+[A9303:Number of
Failed Downlink EGPRS TBF
Establishments due to No
Channel])/([A9101:Number of
Downlink GPRS TBF
Establishment Attempts]+
[A9301:Number of Downlink
EGPRS TBF Establishment
Attempts])*{100}
none
Uplink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
[A9203:Number of Failed
Uplink EGPRS TBF
Establishments due to No
Channel]/[A9201:Number of
Uplink EGPRS TBF
Establishment
Attempts]*{100}
Downlink EGPRS
TBF Congestion
Rate
none
Downlink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
[A9303:Number of Failed
Downlink EGPRS TBF
Establishments due to No
Channel]/[A9301:Number of
Downlink EGPRS TBF
Establishment
Attempts]*{100}
149
PRS
Performance Report Reference
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS
Retainabi
lity KPI
none
Uplink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9006:Number of Uplink
GPRS TBF Abnormal
Releases due to N3101
Overflow (MS No Response)]
+[A9007:Number of Uplink
GPRS TBF Abnormal
Releases due to N3103
Overflow (MS No Response)]
+[A9206:Number of Uplink
EGPRS TBF Abnormal
Releases due to N3101
Overflow (MS No Response)]
+[A9207:Number of Uplink
EGPRS TBF Abnormal
Releases due to N3103
Overflow (MS No
Response)])/([A9002:Number
of Successful Uplink GPRS
TBF Establishments]+
[A9202:Number of Successful
Uplink EGPRS TBF
Establishments])*{100}
none
Downlink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9118:Number of Downlink
GPRS Intermit Transfers]+
[A9318:Number of Downlink
EGPRS Intermit Transfers])/
([A9102:Number of
Successful Downlink GPRS
TBF Establishments]+
[A9302:Number of Successful
Downlink EGPRS TBF
Establishments])*{100}
none
Uplink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9206:Number of Uplink
EGPRS TBF Abnormal
Releases due to N3101
Overflow (MS No Response)]
+[A9207:Number of Uplink
EGPRS TBF Abnormal
Releases due to N3103
Overflow (MS No
Response)])/[A9202:Number
of Successful Uplink EGPRS
TBF Establishments]*{100}
150
PRS
Performance Report Reference
Subrep
ort
Name
PS
Transmis
sion
Performa
nce KPI
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Downlink EGPRS
TBF Drop Rate
none
Downlink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
[A9318:Number of Downlink
EGPRS Intermit Transfers]/
[A9302:Number of Successful
Downlink EGPRS TBF
Establishments]*{100}
Retransmission Rate
of Uplink GPRS
RLC Data
Blocks(%)
none
Uplink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
({1}-(([L9006:Number of
Valid Uplink RLC Data
Blocks Using CS1]+
[L9007:Number of Valid
Uplink RLC Data Blocks
Using CS2]+[L9008:Number
of Valid Uplink RLC Data
Blocks Using CS3]+
[L9009:Number of Valid
Uplink RLC Data Blocks
Using CS4])/[L9001:Total
Number of Uplink GPRS RLC
Data Blocks]))*{100}
Retransmission Rate
of Downlink GPRS
RLC Data
Blocks(%)
none
Downlink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
({1}-(([L9106:Total Number
of Valid RLC Downlink Data
Blocks Using CS1]+
[L9107:Total Number of Valid
RLC Downlink Data Blocks
Using CS2]+[L9108:Total
Number of Valid RLC
Downlink Data Blocks Using
CS3]+[L9109:Total Number
of Valid RLC Downlink Data
Block Using CS4])/
[L9101:Total Number of
Downlink GPRS RLC Data
Blocks]))*{100}
151
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Retransmission Rate
of Uplink EGPRS
RLC Data
Blocks(%)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
({1}-(([L9211:Total Number
of Valid Uplink EGPRS
MCS1 RLC Data Blocks]+
[L9212:Total Number of Valid
Uplink EGPRS MCS2 RLC
Data Blocks]+[L9213:Total
Number of Valid Uplink
EGPRS MCS3 RLC Data
Blocks]+[L9214:Total
Number of Valid Uplink
EGPRS MCS4 RLC Data
Blocks]+[L9215:Total
Number of Valid Uplink
EGPRS MCS5 RLC Data
Blocks]+[L9216:Total
Number of Valid Uplink
EGPRS MCS6 RLC Data
Blocks]+[L9217:Total
Number of Valid Uplink
EGPRS MCS7 RLC Data
Blocks]+[L9218:Total
Number of Valid Uplink
EGPRS MCS8 RLC Data
Blocks]+[L9219:Total
Number of Valid Uplink
EGPRS MCS9 RLC Data
Blocks])/[L9201:Total
Number of Uplink EGPRS
RLC Data Blocks]))*{100}
152
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Retransmission Rate
of Downlink EGPRS
RLC Data
Blocks(%)
none
Downlink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
({1}-(([L9311:Total Number
of Valid Downlink EGPRS
MCS1 RLC Data Blocks]+
[L9312:Total Number of Valid
Downlink EGPRS MCS2
RLC Data Blocks]+
[L9313:Total Number of Valid
Downlink EGPRS MCS3
RLC Data Blocks]+
[L9314:Total Number of Valid
Downlink EGPRS MCS4
RLC Data Blocks]+
[L9315:Total Number of Valid
Downlink EGPRS MCS5
RLC Data Blocks]+
[L9316:Total Number of Valid
Downlink EGPRS MCS6
RLC Data Blocks]+
[L9317:Total Number of Valid
Downlink EGPRS MCS7
RLC Data Blocks]+
[L9318:Total Number of Valid
Downlink EGPRS MCS8
RLC Data Blocks]+
[L9319:Total Number of Valid
Downlink EGPRS MCS9
RLC Data Blocks])/
[L9301:Total Number of
Downlink EGPRS RLC Data
Blocks]))*{100}
Rate of Uplink
GPRS RLC Coding
Scheme with
CS3&CS4(%)
none
Uplink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9008:Number of Valid
Uplink RLC Data Blocks
Using CS3]+[L9009:Number
of Valid Uplink RLC Data
Blocks Using CS4])/
([L9006:Number of Valid
Uplink RLC Data Blocks
Using CS1]+[L9007:Number
of Valid Uplink RLC Data
Blocks Using CS2]+
[L9008:Number of Valid
Uplink RLC Data Blocks
Using CS3]+[L9009:Number
of Valid Uplink RLC Data
Blocks Using CS4])*{100}
153
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Rate of Downlink
GPRS RLC Coding
Scheme with
CS3&CS4(%)
none
Downlink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9108:Total Number of
Valid RLC Downlink Data
Blocks Using CS3]+
[L9109:Total Number of Valid
RLC Downlink Data Block
Using CS4])/([L9106:Total
Number of Valid RLC
Downlink Data Blocks Using
CS1]+[L9107:Total Number
of Valid RLC Downlink Data
Blocks Using CS2]+
[L9108:Total Number of Valid
RLC Downlink Data Blocks
Using CS3]+[L9109:Total
Number of Valid RLC
Downlink Data Block Using
CS4])*{100}
154
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Rate of Uplink
EGPRS RLC
Coding Scheme with
MCS7&MCS8&MC
S9(%)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9217:Total Number of
Valid Uplink EGPRS MCS7
RLC Data Blocks]+
[L9218:Total Number of Valid
Uplink EGPRS MCS8 RLC
Data Blocks]+[L9219:Total
Number of Valid Uplink
EGPRS MCS9 RLC Data
Blocks])/([L9211:Total
Number of Valid Uplink
EGPRS MCS1 RLC Data
Blocks]+[L9212:Total
Number of Valid Uplink
EGPRS MCS2 RLC Data
Blocks]+[L9213:Total
Number of Valid Uplink
EGPRS MCS3 RLC Data
Blocks]+[L9214:Total
Number of Valid Uplink
EGPRS MCS4 RLC Data
Blocks]+[L9215:Total
Number of Valid Uplink
EGPRS MCS5 RLC Data
Blocks]+[L9216:Total
Number of Valid Uplink
EGPRS MCS6 RLC Data
Blocks]+[L9217:Total
Number of Valid Uplink
EGPRS MCS7 RLC Data
Blocks]+[L9218:Total
Number of Valid Uplink
EGPRS MCS8 RLC Data
Blocks]+[L9219:Total
Number of Valid Uplink
EGPRS MCS9 RLC Data
Blocks])*{100}
155
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Rate of Downlink
EGPRS RLC
Coding Scheme with
MCS7&MCS8&MC
S9(%)
none
Downlink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9317:Total Number of
Valid Downlink EGPRS
MCS7 RLC Data Blocks]+
[L9318:Total Number of Valid
Downlink EGPRS MCS8
RLC Data Blocks]+
[L9319:Total Number of Valid
Downlink EGPRS MCS9
RLC Data Blocks])/
([L9311:Total Number of
Valid Downlink EGPRS
MCS1 RLC Data Blocks]+
[L9312:Total Number of Valid
Downlink EGPRS MCS2
RLC Data Blocks]+
[L9313:Total Number of Valid
Downlink EGPRS MCS3
RLC Data Blocks]+
[L9314:Total Number of Valid
Downlink EGPRS MCS4
RLC Data Blocks]+
[L9315:Total Number of Valid
Downlink EGPRS MCS5
RLC Data Blocks]+
[L9316:Total Number of Valid
Downlink EGPRS MCS6
RLC Data Blocks]+
[L9317:Total Number of Valid
Downlink EGPRS MCS7
RLC Data Blocks]+
[L9318:Total Number of Valid
Downlink EGPRS MCS8
RLC Data Blocks]+
[L9319:Total Number of Valid
Downlink EGPRS MCS9
RLC Data Blocks])*{100}
156
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Uplink GPRS
RLC per
PDCH(kbps)
none
Uplink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9006:Number of Valid
Uplink RLC Data Blocks
Using CS1]*{23}+
[L9007:Number of Valid
Uplink RLC Data Blocks
Using CS2]*{34}+
[L9008:Number of Valid
Uplink RLC Data Blocks
Using CS3]*{40}+
[L9009:Number of Valid
Uplink RLC Data Blocks
Using CS4]*{54})*{8}/
({1024}*[L9001:Total
Number of Uplink GPRS RLC
Data Blocks]*{20}/{1000})
Average Throughput
of Downlink GPRS
RLC per
PDCH(kbps)
none
Downlink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9106:Total Number of
Valid RLC Downlink Data
Blocks Using CS1]*{23}+
[L9107:Total Number of Valid
RLC Downlink Data Blocks
Using CS2]*{34}+
[L9108:Total Number of Valid
RLC Downlink Data Blocks
Using CS3]*{40}+
[L9109:Total Number of Valid
RLC Downlink Data Block
Using CS4]*{54})*{8}/
({1024}*[L9101:Total
Number of Downlink GPRS
RLC Data Blocks]*{20}/
{1000})
157
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Uplink EGPRS
RLC per
PDCH(kbps)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
(([L9211:Total Number of
Valid Uplink EGPRS MCS1
RLC Data Blocks]*{22}+
[L9212:Total Number of Valid
Uplink EGPRS MCS2 RLC
Data Blocks]*{28}+
[L9213:Total Number of Valid
Uplink EGPRS MCS3 RLC
Data Blocks]*{37}+
[L9214:Total Number of Valid
Uplink EGPRS MCS4 RLC
Data Blocks]*{44}+
[L9215:Total Number of Valid
Uplink EGPRS MCS5 RLC
Data Blocks]*{56}+
[L9216:Total Number of Valid
Uplink EGPRS MCS6 RLC
Data Blocks]*{74}+
[L9217:Total Number of Valid
Uplink EGPRS MCS7 RLC
Data Blocks]*{56}+
[L9218:Total Number of Valid
Uplink EGPRS MCS8 RLC
Data Blocks]*{68}+
[L9219:Total Number of Valid
Uplink EGPRS MCS9 RLC
Data Blocks]*{74})*{8})/
(({1024}*([L9202:Total
Number of Uplink EGPRS
MCS1 RLC Data Blocks]+
[L9203:Total Number of
Uplink EGPRS MCS2 RLC
Data Blocks]+[L9204:Total
Number of Uplink EGPRS
MCS3 RLC Data Blocks]+
[L9205:Total Number of
Uplink EGPRS MCS4 RLC
Data Blocks]+[L9206:Total
Number of Uplink EGPRS
MCS5 RLC Data Blocks]+
[L9207:Total Number of
Uplink EGPRS MCS6 RLC
Data Blocks]+[L9208:Total
Number of Uplink EGPRS
MCS7 RLC Data Blocks]/
{2}+[L9209:Total Number of
Uplink EGPRS MCS8 RLC
Data Blocks]/{2}+
158
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[L9210:Total Number of
Uplink EGPRS MCS9 RLC
Data Blocks]/{2})*{20}/
{1000}))
Issue 01 (2016-09-15)
159
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Downlink EGPRS
RLC per
PDCH(kbps)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
(([L9311:Total Number of
Valid Downlink EGPRS
MCS1 RLC Data
Blocks]*{22}+[L9312:Total
Number of Valid Downlink
EGPRS MCS2 RLC Data
Blocks]*{28}+[L9313:Total
Number of Valid Downlink
EGPRS MCS3 RLC Data
Blocks]*{37}+[L9314:Total
Number of Valid Downlink
EGPRS MCS4 RLC Data
Blocks]*{44}+[L9315:Total
Number of Valid Downlink
EGPRS MCS5 RLC Data
Blocks]*{56}+[L9316:Total
Number of Valid Downlink
EGPRS MCS6 RLC Data
Blocks]*{74}+[L9317:Total
Number of Valid Downlink
EGPRS MCS7 RLC Data
Blocks]*{56}+[L9318:Total
Number of Valid Downlink
EGPRS MCS8 RLC Data
Blocks]*{68}+[L9319:Total
Number of Valid Downlink
EGPRS MCS9 RLC Data
Blocks]*{74})*{8})/
(({1024}*([L9302:Total
Number of Downlink EGPRS
MCS1 RLC Data Blocks]+
[L9303:Total Number of
Downlink EGPRS MCS2
RLC Data Blocks]+
[L9304:Total Number of
Downlink EGPRS MCS3
RLC Data Blocks]+
[L9305:Total Number of
Downlink EGPRS MCS4
RLC Data Blocks]+
[L9306:Total Number of
Downlink EGPRS MCS5
RLC Data Blocks]+
[L9307:Total Number of
Downlink EGPRS MCS6
RLC data blocks]+
[L9308:Total Number of
Downlink EGPRS MCS7
160
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 01 (2016-09-15)
Average Throughput
of Uplink GPRS
RLC per Cell(kbps)
none
Uplink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9006:Number of Valid
Uplink RLC Data Blocks
Using CS1]*{23}+
[L9007:Number of Valid
Uplink RLC Data Blocks
Using CS2]*{34}+
[L9008:Number of Valid
Uplink RLC Data Blocks
Using CS3]*{40}+
[L9009:Number of Valid
Uplink RLC Data Blocks
Using CS4]*{54})*{8}/
({1024}*[L9020:Total
Duration of Uplink GPRS
TBFs])
Average Throughput
of Downlink GPRS
RLC per Cell(kbps)
none
Downlink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9106:Total Number of
Valid RLC Downlink Data
Blocks Using CS1]*{23}+
[L9107:Total Number of Valid
RLC Downlink Data Blocks
Using CS2]*{34}+
[L9108:Total Number of Valid
RLC Downlink Data Blocks
Using CS3]*{40}+
[L9109:Total Number of Valid
RLC Downlink Data Block
Using CS4]*{54})*{8}/
({1024}*[L9121:Total
Duration of Downlink GPRS
TBFs])
161
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Uplink EGPRS
RLC per Cell(kbps)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9211:Total Number of
Valid Uplink EGPRS MCS1
RLC Data Blocks]*{22}+
[L9212:Total Number of Valid
Uplink EGPRS MCS2 RLC
Data Blocks]*{28}+
[L9213:Total Number of Valid
Uplink EGPRS MCS3 RLC
Data Blocks]*{37}+
[L9214:Total Number of Valid
Uplink EGPRS MCS4 RLC
Data Blocks]*{44}+
[L9215:Total Number of Valid
Uplink EGPRS MCS5 RLC
Data Blocks]*{56}+
[L9216:Total Number of Valid
Uplink EGPRS MCS6 RLC
Data Blocks]*{74}+
[L9217:Total Number of Valid
Uplink EGPRS MCS7 RLC
Data Blocks]*{56}+
[L9218:Total Number of Valid
Uplink EGPRS MCS8 RLC
Data Blocks]*{68}+
[L9219:Total Number of Valid
Uplink EGPRS MCS9 RLC
Data Blocks]*{74})*{8}/
({1024}*[L9235:Total
Duration of Uplink EGPRS
TBFs])
162
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Downlink EGPRS
RLC per Cell(kbps)
none
Downlink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9311:Total Number of
Valid Downlink EGPRS
MCS1 RLC Data
Blocks]*{22}+[L9312:Total
Number of Valid Downlink
EGPRS MCS2 RLC Data
Blocks]*{28}+[L9313:Total
Number of Valid Downlink
EGPRS MCS3 RLC Data
Blocks]*{37}+[L9314:Total
Number of Valid Downlink
EGPRS MCS4 RLC Data
Blocks]*{44}+[L9315:Total
Number of Valid Downlink
EGPRS MCS5 RLC Data
Blocks]*{56}+[L9316:Total
Number of Valid Downlink
EGPRS MCS6 RLC Data
Blocks]*{74}+[L9317:Total
Number of Valid Downlink
EGPRS MCS7 RLC Data
Blocks]*{56}+[L9318:Total
Number of Valid Downlink
EGPRS MCS8 RLC Data
Blocks]*{68}+[L9319:Total
Number of Valid Downlink
EGPRS MCS9 RLC Data
Blocks]*{74})*{8}/
({1024}*[L9336:Total
Duration of Downlink EGPRS
TBFs])
Average Throughput
of Uplink GPRS
LLC per User(kbps)
none
Uplink LLC
Data
Transfer
Capability
Measuremen
t
[L9422:Throughput of Uplink
GPRS Users LLC PDU]/
([L9421:Total Bytes of Uplink
GPRS Users LLC
PDUs]*{8}/{1024})
Average Throughput
of Downlink GPRS
LLC per User(kbps)
none
Downlink
LLC Data
Transfer
Capability
Measuremen
t
[L9526:Throughput of
Downlink GPRS Users LLC
PDU]/([L9525:Total Bytes of
Downlink GPRS Users LLC
PDU]*{8}/{1024})
163
PRS
Performance Report Reference
Subrep
ort
Name
PS
Resource
Usage
Ratio
KPI
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Uplink EGPRS
LLC per User(kbps)
none
Uplink LLC
Data
Transfer
Capability
Measuremen
t
[L9424:Throughput of Uplink
EGPRS Users LLC PDU]/
([L9423:Total Bytes of Uplink
EGPRS Users LLC
PDUs]*{8}/{1024})
Average Throughput
of Downlink EGPRS
LLC per User(kbps)
none
Downlink
LLC Data
Transfer
Capability
Measuremen
t
[L9528:Throughput of
Downlink EGPRS Users LLC
PDU]/([L9527:Total Bytes of
Downlink EGPRS Users LLC
PDU]*{8}/{1024})
Uplink PDTCH/
PACCH Utilization
Rate
none
Cell Radio
Channel
Capability
Measuremen
t
Downlink PDTCH/
PACCH Utilization
Rate
none
Cell Radio
Channel
Capability
Measuremen
t
PDCH Occupation
Rate
none
PDCH
Resource
Capability
Measuremen
t
[AR9311:Average Number of
Occupied PDCHs]/
[AR9303:Average Number of
Available PDCHs]*{100}
BSC Reclaimed
Dynamic PDCH
Rate
none
PDCH
Resource
Capability
Measuremen
t
[R9344:Number of Reclaimed
Busy Dynamic PDCHs]/
[R9343:Number of Reclaimed
Dynamic PDCHs]*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
164
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
GSM
BSC KPI
Report
RCA313:Assignmen
t Success Rate
Assignment
Measuremen
t per Cell
K3043:TCH Seizure
Success Rate
KPI
Measuremen
t per Cell
RA303G:Success
Rate of Immediate
Assignments
Immediate
Assignment
Measuremen
t per Cell
RA301G:Success
Rate of Random
Access
Immediate
Assignment
Measuremen
t per Cell
TH323:Success Rate
of Incoming Internal
Inter-Cell Handovers
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303:Handover
Success Rate
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
165
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
RH303A:Success
Rate of Radio
Handover
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
TH303:Success Rate
of Internal Intra-Cell
Handover
Intra-cell
Handover
Measuremen
t per Cell
ZTR104C:Call Drop
Rate on SDCCH
Call Drop
Measuremen
t per Cell
ZTR304A:Call Drop
Rate on TCH per
cell(Excluding
Handover)
Call Drop
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per
cell(including
Handover)
Call Drop
Measuremen
t per Cell
RR370:Congestion
Rate on SDCCH per
CELL (due to Busy)
Channel
Assignment
Failure
Measuremen
t per Cell
K3041:TCH
Congestion Rate
(Overflow)
KPI
Measuremen
t per Cell
K3045:Congestion
Rate on TCH (All
Channels Busy)
KPI
Measuremen
t per Cell
K3014:Traffic
Volume on TCH
Erl
KPI
Measuremen
t per Cell
K3004:Traffic
Volume on SDCCH
Erl
KPI
Measuremen
t per Cell
166
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RR307:TCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
RR300:SDCCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
ZTR308:Traffic Call
Drop Ratio per cell
none
Channel
State
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Accessibility Report
Mobility Report
Issue 01 (2016-09-15)
167
PRS
Performance Report Reference
Retainability Report
Accessibility Report
Null
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accessib
ility
Report
RA303G:Success
Rate of Immediate
Assignments
Immediate
Assignment
Measuremen
t per Cell
K3100:Immediate
Assignment
Requests
times
KPI
Measuremen
t per Cell
A9503:Number of
Uplink PS
Immediate
Assignments
times
Packet
Assignment
Capability
Measuremen
t
A9504:Number of
Successful Uplink
PS Immediate
Assignments
times
Packet
Assignment
Capability
Measuremen
t
A9509:Number of
Downlink PS
Immediate
Assignments
times
Packet
Assignment
Capability
Measuremen
t
168
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
A9510:Number of
Successful
Downlink PS
Immediate
Assignments
times
Packet
Assignment
Capability
Measuremen
t
R3100A:Channel
Assignment
Requests in
Immediate
Assignment
Procedure (SDCCH)
times
Channel
Assignment
Request
Measuremen
t per Cell
R3109A:Channel
Assignment
Requests in
Immediate
Assignment
Procedure (TCH)
times
Channel
Assignment
Request
Measuremen
t per Cell
K3010A:TCH
Seizure Requests
(Traffic Channel)
times
KPI
Measuremen
t per Cell
K3043:TCH Seizure
Success Rate
KPI
Measuremen
t per Cell
K3021:Failed TCH
Seizures due to Busy
TCH (Signaling
Channel)
times
KPI
Measuremen
t per Cell
K3023:Successful
TCH Seizures
(Signaling Channel)
times
KPI
Measuremen
t per Cell
ZTR104C:Call Drop
Rate on SDCCH
Call Drop
Measuremen
t per Cell
NE Type
BSC6900GSM, BSC6000
Issue 01 (2016-09-15)
169
PRS
Performance Report Reference
Object Type
GCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Call
Drop
Cell
Report
ZTR304A:Call Drop
Rate on TCH per
cell(Excluding
Handover)
Call Drop
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per
cell(including
Handover)
Call Drop
Measuremen
t per Cell
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Congesti
on Cell
Report
K3045:Congestion
Rate on TCH (All
Channels Busy)
KPI
Measuremen
t per Cell
NE Type
BSC6900GSM, BSC6000
Issue 01 (2016-09-15)
170
PRS
Performance Report Reference
Object Type
GCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Extra
Busy
Cell
Report
R3550N:Traffic
Volume of Signaling
Channels (TCH)
Erl
Channel
State
Measuremen
t per Cell
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Extra
Idle Cell
Report
R3550N:Traffic
Volume of Signaling
Channels (TCH)
Erl
Channel
State
Measuremen
t per Cell
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Issue 01 (2016-09-15)
171
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
GSM
BSC KPI
Report
RCA313:Assignmen
t Success Rate
Assignment
Measuremen
t per Cell
K3043:TCH Seizure
Success Rate
KPI
Measuremen
t per Cell
RA303G:Success
Rate of Immediate
Assignments
Immediate
Assignment
Measuremen
t per Cell
RA301G:Success
Rate of Random
Access
Immediate
Assignment
Measuremen
t per Cell
TH323:Success Rate
of Incoming Internal
Inter-Cell Handovers
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303:Handover
Success Rate
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303A:Success
Rate of Radio
Handover
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
TH303:Success Rate
of Internal Intra-Cell
Handover
Intra-cell
Handover
Measuremen
t per Cell
ZTR104C:Call Drop
Rate on SDCCH
Call Drop
Measuremen
t per Cell
172
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
ZTR304A:Call Drop
Rate on TCH per
cell(Excluding
Handover)
Call Drop
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per
cell(including
Handover)
Call Drop
Measuremen
t per Cell
RR370:Congestion
Rate on SDCCH per
CELL (due to Busy)
Channel
Assignment
Failure
Measuremen
t per Cell
K3041:TCH
Congestion Rate
(Overflow)
KPI
Measuremen
t per Cell
K3045:Congestion
Rate on TCH (All
Channels Busy)
KPI
Measuremen
t per Cell
K3014:Traffic
Volume on TCH
Erl
KPI
Measuremen
t per Cell
K3004:Traffic
Volume on SDCCH
Erl
KPI
Measuremen
t per Cell
RR307:TCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
RR300:SDCCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
ZTR308:Traffic Call
Drop Ratio per cell
none
Channel
State
Measuremen
t per Cell
173
PRS
Performance Report Reference
Mobility Report
Null
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Mobility
Report
RH303:Handover
Success Rate
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H3122C:Number of
Unsuccessful
Outgoing Internal
Inter-Cell Handovers
(Uplink Strength)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H3122B:Number of
Unsuccessful
Outgoing Internal
Inter-Cell Handovers
(Downlink Quality)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H3122A:Number of
Unsuccessful
Outgoing Internal
Inter-Cell Handovers
(Uplink Quality)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H311B:Number of
Outgoing Internal
Inter-Cell Handover
Commands
(Downlink Quality)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
174
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
H310O:Number of
Outgoing Internal
Inter-Cell Handover
Requests (MS
Handover in the
Overlaid Subcell
Covered by the
Enhanced Dualband
Network)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H310N:Number of
Outgoing Internal
Inter-Cell Handover
Requests (Overlaid
to Underlaid Subcell
in Enhanced
Dualband Network)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H310M:Number of
Outgoing Internal
Inter-Cell Handover
Requests (Underlaid
to Overlaid Subcell
in Enhanced
Dualband Network)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H310F:Number of
Outgoing Internal
Inter-Cell Handover
Requests (Better
Cell)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H310G:Number of
Outgoing Internal
Inter-Cell Handover
Requests (Load)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H310H:Number of
Outgoing Internal
Inter-Cell Handover
Requests (Rapid
Level Drop)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
175
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
H3100Y:Number of
Outgoing Internal
Inter-Cell Handover
Requests (SDCCH)
(Excluding Directed
Retry)
(900/850/810-1800/
1900)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
CH370a:Number of
Successful Outgoing
Internal Inter-Cell
Handovers During
BSC Local Switch
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
CH370b:Number of
Successful Outgoing
Internal Inter-Cell
Handovers During
BTS Local Switch
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
CH312C:Number of
Unsuccessful
Outgoing Internal
Inter-Cell Handovers
(Timer Expired)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Issue 01 (2016-09-15)
176
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Resource
Utilizatio
n Report
RR307:TCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
K3015:Available
TCHs
numb
er
KPI
Measuremen
t per Cell
K3005:Available
SDCCHs
numb
er
KPI
Measuremen
t per Cell
K3006:Configured
SDCCHs
numb
er
KPI
Measuremen
t per Cell
K3016:Configured
TCHs
numb
er
KPI
Measuremen
t per Cell
RCA313:Assignmen
t Success Rate
Assignment
Measuremen
t per Cell
A3157A:Failed
Mode Modify
Attempts (MOC)
(TCHF)
times
Assignment
Measuremen
t per Cell
A3157C:Failed
Mode Modify
Attempts (MTC)
(TCHF)
times
Assignment
Measuremen
t per Cell
A3158A:Failed
Mode Modify
Attempts (MOC)
(TCHH)
times
Assignment
Measuremen
t per Cell
A3158C:Failed
Mode Modify
Attempts (MTC)
(TCHH)
times
Assignment
Measuremen
t per Cell
S422:Number of
Attemps in
Interference Band
numb
er
Interference
Band
Measuremen
t per TRX
177
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
R3134:Failed
Queuing Attempts
due to Queue
Overflow
times
Channel
Assignment
Queue
Measuremen
t per Cell
CR313C:Failed
Queuing Attempts
times
Channel
Assignment
Queue
Measuremen
t per Cell
K3004:Traffic
Volume on SDCCH
Erl
KPI
Measuremen
t per Cell
K3014:Traffic
Volume on TCH
Erl
KPI
Measuremen
t per Cell
K3034:TCHH
Traffic Volume
Erl
KPI
Measuremen
t per Cell
R3550N:Traffic
Volume of Signaling
Channels (TCH)
Erl
Channel
State
Measuremen
t per Cell
R3550M:Traffic
Volume of Signaling
Channels (SDCCH)
Erl
Channel
State
Measuremen
t per Cell
R3550L:Traffic
Volume of Unknown
Service on SDCCH
Erl
Channel
State
Measuremen
t per Cell
R3550J:Traffic
Volume of USSD
Service on SDCCH
Erl
Channel
State
Measuremen
t per Cell
R3550I:Traffic
Volume of Short
Message Service on
SDCCH
Erl
Channel
State
Measuremen
t per Cell
178
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
R3550H:Traffic
Volume of Speech
Service on SDCCH
Erl
Channel
State
Measuremen
t per Cell
Retainability Report
Null
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Retainabi
lity
Report
ZTR304A:Call Drop
Rate on TCH per
cell(Excluding
Handover)
Call Drop
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per
cell(including
Handover)
Call Drop
Measuremen
t per Cell
ZTR104C:Call Drop
Rate on SDCCH
Call Drop
Measuremen
t per Cell
RM317:Call Drop
Rate on TCHF per
cell
Call Drop
Measuremen
t per Cell
RM327:Call Drop
Rate on TCHH per
cell
Call Drop
Measuremen
t per Cell
179
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RM330:Call Drop
Rate on TCH on the
TRX in the
Underlaid Subcell
Call Drop
Measuremen
t per Cell
RM330a:Call Drop
Rate on TCH on the
TRX in the
OverLaid Subcell
Call Drop
Measuremen
t per Cell
ZTR308:Traffic Call
Drop Ratio per cell
none
Channel
State
Measuremen
t per Cell
ZTR104B:Call Drop
Rate on SDCCH
(Call Type)
SDCCH Call
Drop
Measuremen
t per Cell
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Worst
Cell
Report
R3550N:Traffic
Volume of Signaling
Channels (TCH)
Erl
Channel
State
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per
cell(including
Handover)
Call Drop
Measuremen
t per Cell
180
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
ZTR304A:Call Drop
Rate on TCH per
cell(Excluding
Handover)
Call Drop
Measuremen
t per Cell
K3041:TCH
Congestion Rate
(Overflow)
KPI
Measuremen
t per Cell
NE Type
BSC6900GSM, BSC6000
Object Type
GBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS
Accessab
lity KPI
RA303G:Success
Rate of Immediate
Assignments
Immediate
Assignment
Measuremen
t per Cell
RR370:Congestion
Rate on SDCCH per
CELL (due to Busy)
Channel
Assignment
Failure
Measuremen
t per Cell
ZTR104C:Call Drop
Rate on SDCCH
Call Drop
Measuremen
t per Cell
Assignment Success
Rate
none
Assignment
Measuremen
t per Cell
[CA313:Successful
Assignments]/
[CA310:Assignment
Requests]*{100}
181
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
K3041:TCH
Congestion Rate
(Overflow)
KPI
Measuremen
t per Cell
K3043:TCH Seizure
Success Rate
KPI
Measuremen
t per Cell
none
Assignment
Measuremen
t per Cell
([CA313:Successful
Assignments]([A3100K:Assignment
Requests (Signaling Channel)
(SDCCH)]+
[A3100A:Assignment
Requests (Signaling Channel)
(TCH)]-[A312S:Failed
Assignments (Signaling
Channel)]+
[CA310A:Assignment
Requests (TCH Assigned
Repeatedly over A Interface)][CA312A:Failed Assignments
(TCH Assigned Repeatedly
over A Interface)]))/
([A3039J:SDCCH Seizures
for Speech Service]+
[A301F:TCHF Seizures for
Speech Service]+
[A301HH:TCHH Seizures for
Speech Service])*{100}
BSS Call
Establishment
Success Rate
none
Immediate
Assignment
Measuremen
t per Cell
((([CA303J:Call Setup
Indications (Circuit
Service)])*{100}/
([CA300J:Channel Requests
(Circuit Service)]))/
{100})*((([CA313:Successful
Assignments])*{100}/
([CA310:Assignment
Requests]))/{100})*({1}((([CM30:Call Drops on
SDCCH])*{100}/
([K3003:Successful SDCCH
Seizures]))/{100}))*{100}
182
PRS
Performance Report Reference
Subrep
ort
Name
CS
Retainabi
lity KPI
CS
Mobility
KPI
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
OVERLOAD rate of
paging
none
Flow Control
Measuremen
t per Cell
([L3188C:MSG CCCH
LOAD IND (PCH) Messages
Sent on Abis Interface (CS
Service)]+[L3188D:MSG
CCCH LOAD IND (PCH)
Messages Sent on Abis
Interface (PS Service)])/
([A330:Delivered Paging
Messages for CS Service]+
[A331:Delivered Paging
Messages for PS
Service])*{100}
ZTR304:Call Drop
Rate on TCH per
cell(including
Handover)
Call Drop
Measuremen
t per Cell
ZTR304A:Call Drop
Rate on TCH per
cell(Excluding
Handover)
Call Drop
Measuremen
t per Cell
none
KPI
Measuremen
t per Cell
{60}*[K3014:Traffic Volume
on TCH]/[CM33:Call Drops
on Traffic Channel]*{100}
RM333:Radio Drop
Rate of TCH
Call Drop
Measuremen
t per Cell
RH333:Handover
Drop Rate of TCH
Intra-cell
Handover
Measuremen
t per Cell
RH303:Handover
Success Rate
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303A:Success
Rate of Radio
Handover
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
183
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
RH303B:Intra-BSC
Handover Success
Rate
Intra-cell
Handover
Measuremen
t per Cell
RH303C:Intra-BSC
Radio Handover
Success Rate
Intra-cell
Handover
Measuremen
t per Cell
TH343:Success Rate
of Incoming
External Inter-Cell
Handovers
Incoming
External
Inter-Cell
Handover
Measuremen
t per Cell
RH303D:Success
Rate of Incoming
External Inter-Cell
Radio Handovers
Incoming
External
Inter-Cell
Handover
Measuremen
t per Cell
TH333:Success Rate
of Outgoing
External Inter-Cell
Handovers
Outgoing
External
Inter-Cell
Handover
Measuremen
t per Cell
RH303E:Success
Rate of External
Outgoing Cell Radio
Handovers
Outgoing
External
Inter-Cell
Handover
Measuremen
t per Cell
184
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Success Rate of
Dual-Band
Handovers (900M/
850M-1800M/
1900M)(V2)
none
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
(([RH3031G:Incoming
Internal Inter-Cell Handover
Requests
(900/850/810-1800/1900)]+
[RH3033G:Incoming External
Inter-Cell Handover Requests
(900/850/810-1800/1900)]+
[RH3035G:Outgoing External
Inter-Cell Handover Requests
(900/850/810-1800/1900)])([RH3031F:Failed Incoming
Internal Inter-Cell Handovers
(900/850/810-1800/1900)]+
[RH3033F:Failed Incoming
External Inter-Cell Handovers
(900/850/810-1800/1900)]+
[RH3035F:Failed Outgoing
External Inter-Cell Handovers
(900/850/810-1800/1900)]))/
([RH3031G:Incoming Internal
Inter-Cell Handover Requests
(900/850/810-1800/1900)]+
[RH3033G:Incoming External
Inter-Cell Handover Requests
(900/850/810-1800/1900)]+
[RH3035G:Outgoing External
Inter-Cell Handover Requests
(900/850/810-1800/1900)])*{
100}
185
PRS
Performance Report Reference
Subrep
ort
Name
CS
Resource
Usage
Ratio
KPI
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Success Rate of
Dual-Band
Handovers (1800M/
1900M-900M/
850M)(V2)
none
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
(([RH3032G:Incoming
Internal Inter-Cell Handover
Requests
(1800/1900-900/850/810)]+
[RH3034G:Incoming External
Inter-Cell Handover Requests
(1800/1900-900/850/810)]+
[RH3036G:Outgoing External
Inter-Cell Handover Requests
(1800/1900-900/850/810)])([RH3032F:Failed Incoming
Internal Inter-Cell Handovers
(1800/1900-900/850/810)]+
[RH3034F:Failed Incoming
External Inter-Cell Handovers
(1800/1900-900/850/810)]+
[RH3036F:Failed Outgoing
External Inter-Cell Handovers
(1800/1900-900/850/810)]))/
([RH3032G:Incoming Internal
Inter-Cell Handover Requests
(1800/1900-900/850/810)]+
[RH3034G:Incoming External
Inter-Cell Handover Requests
(1800/1900-900/850/810)]+
[RH3036G:Outgoing External
Inter-Cell Handover Requests
(1800/1900-900/850/810)])*{
100}
Traffic Volume on
TCH(V2)
none
KPI
Measuremen
t per Cell
[K3014:Traffic Volume on
TCH]
TCHH Traffic
Volume(V2)
none
KPI
Measuremen
t per Cell
[K3034:TCHH Traffic
Volume]
Traffic Volume on
SDCCH(V2)
none
KPI
Measuremen
t per Cell
[K3004:Traffic Volume on
SDCCH]
186
PRS
Performance Report Reference
Subrep
ort
Name
PS
Accessab
lity KPI
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Availability(V2)
none
Channel
Configuratio
n
Measuremen
t per Cell
([CR3027:Mean Number of
Available Channels (TCHF)]+
[CR3028:Mean Number of
Available Channels (TCHH)])/
([CR3017:Mean Number of
Dynamically Configured
Channels (TCHF)]+
[CR3018:Mean Number of
Dynamically Configured
Channels (TCHH)])*{100}
SDCCH
Availability(V2)
none
Channel
Configuratio
n
Measuremen
t per Cell
[CR3020:Mean Number of
Available Channels
(SDCCH)]/[CR3010:Mean
Number of Dynamically
Configured Channels
(SDCCH)]*{100}
RK3255:TRX
Usability
KPI
Measuremen
t per Cell
Successful Uplink
Assignment Rate
none
Packet
Assignment
Capability
Measuremen
t
[A9502:Number of Successful
Uplink Assignments]/
[A9501:Number of Uplink
Assignments]*{100}
Successful
Downlink
Assignment Rate
none
Packet
Assignment
Capability
Measuremen
t
[A9508:Number of Successful
Downlink Assignments]/
[A9507:Number of Downlink
Assignments]*{100}
Uplink TBF
Establishment
Success Rate
none
Uplink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9002:Number of
Successful Uplink GPRS TBF
Establishments]+
[A9202:Number of Successful
Uplink EGPRS TBF
Establishments])/
([A9001:Number of Uplink
GPRS TBF Establishment
Attempts]+[A9201:Number of
Uplink EGPRS TBF
Establishment
Attempts])*{100}
187
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Downlink TBF
Establishment
Success Rate
none
Downlink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9102:Number of
Successful Downlink GPRS
TBF Establishments]+
[A9302:Number of Successful
Downlink EGPRS TBF
Establishments])/
([A9101:Number of Downlink
GPRS TBF Establishment
Attempts]+[A9301:Number of
Downlink EGPRS TBF
Establishment
Attempts])*{100}
Uplink EGPRS
Establishment
Success Rate
none
Uplink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
[A9202:Number of Successful
Uplink EGPRS TBF
Establishments]/
[A9201:Number of Uplink
EGPRS TBF Establishment
Attempts]*{100}
Downlink EGPRS
Establishment
Success Rate
none
Downlink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
[A9302:Number of Successful
Downlink EGPRS TBF
Establishments]/
[A9301:Number of Downlink
EGPRS TBF Establishment
Attempts]*{100}
Uplink TBF
Congestion Rate
none
Uplink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9003:Number of Failed
Uplink GPRS TBF
Establishments due to No
Channel]+[A9203:Number of
Failed Uplink EGPRS TBF
Establishments due to No
Channel])/([A9001:Number of
Uplink GPRS TBF
Establishment Attempts]+
[A9201:Number of Uplink
EGPRS TBF Establishment
Attempts])*{100}
188
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Downlink TBF
Congestion Rate
none
Downlink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9103:Number of Failed
Downlink GPRS TBF
Establishments due to No
Channel]+[A9303:Number of
Failed Downlink EGPRS TBF
Establishments due to No
Channel])/([A9101:Number of
Downlink GPRS TBF
Establishment Attempts]+
[A9301:Number of Downlink
EGPRS TBF Establishment
Attempts])*{100}
none
Uplink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
[A9203:Number of Failed
Uplink EGPRS TBF
Establishments due to No
Channel]/[A9201:Number of
Uplink EGPRS TBF
Establishment
Attempts]*{100}
Downlink EGPRS
TBF Congestion
Rate
none
Downlink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
[A9303:Number of Failed
Downlink EGPRS TBF
Establishments due to No
Channel]/[A9301:Number of
Downlink EGPRS TBF
Establishment
Attempts]*{100}
189
PRS
Performance Report Reference
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS
Retainabi
lity KPI
none
Uplink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9006:Number of Uplink
GPRS TBF Abnormal
Releases due to N3101
Overflow (MS No Response)]
+[A9007:Number of Uplink
GPRS TBF Abnormal
Releases due to N3103
Overflow (MS No Response)]
+[A9206:Number of Uplink
EGPRS TBF Abnormal
Releases due to N3101
Overflow (MS No Response)]
+[A9207:Number of Uplink
EGPRS TBF Abnormal
Releases due to N3103
Overflow (MS No
Response)])/([A9002:Number
of Successful Uplink GPRS
TBF Establishments]+
[A9202:Number of Successful
Uplink EGPRS TBF
Establishments])*{100}
none
Downlink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9118:Number of Downlink
GPRS Intermit Transfers]+
[A9318:Number of Downlink
EGPRS Intermit Transfers])/
([A9102:Number of
Successful Downlink GPRS
TBF Establishments]+
[A9302:Number of Successful
Downlink EGPRS TBF
Establishments])*{100}
none
Uplink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9206:Number of Uplink
EGPRS TBF Abnormal
Releases due to N3101
Overflow (MS No Response)]
+[A9207:Number of Uplink
EGPRS TBF Abnormal
Releases due to N3103
Overflow (MS No
Response)])/[A9202:Number
of Successful Uplink EGPRS
TBF Establishments]*{100}
190
PRS
Performance Report Reference
Subrep
ort
Name
PS
Transmis
sion
Performa
nce KPI
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Downlink EGPRS
TBF Drop Rate
none
Downlink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
[A9318:Number of Downlink
EGPRS Intermit Transfers]/
[A9302:Number of Successful
Downlink EGPRS TBF
Establishments]*{100}
Retransmission Rate
of Uplink GPRS
RLC Data
Blocks(%)
none
Uplink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
({1}-(([L9006:Number of
Valid Uplink RLC Data
Blocks Using CS1]+
[L9007:Number of Valid
Uplink RLC Data Blocks
Using CS2]+[L9008:Number
of Valid Uplink RLC Data
Blocks Using CS3]+
[L9009:Number of Valid
Uplink RLC Data Blocks
Using CS4])/[L9001:Total
Number of Uplink GPRS RLC
Data Blocks]))*{100}
Retransmission Rate
of Downlink GPRS
RLC Data
Blocks(%)
none
Downlink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
({1}-(([L9106:Total Number
of Valid RLC Downlink Data
Blocks Using CS1]+
[L9107:Total Number of Valid
RLC Downlink Data Blocks
Using CS2]+[L9108:Total
Number of Valid RLC
Downlink Data Blocks Using
CS3]+[L9109:Total Number
of Valid RLC Downlink Data
Block Using CS4])/
[L9101:Total Number of
Downlink GPRS RLC Data
Blocks]))*{100}
191
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Retransmission Rate
of Uplink EGPRS
RLC Data
Blocks(%)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
({1}-(([L9211:Total Number
of Valid Uplink EGPRS
MCS1 RLC Data Blocks]+
[L9212:Total Number of Valid
Uplink EGPRS MCS2 RLC
Data Blocks]+[L9213:Total
Number of Valid Uplink
EGPRS MCS3 RLC Data
Blocks]+[L9214:Total
Number of Valid Uplink
EGPRS MCS4 RLC Data
Blocks]+[L9215:Total
Number of Valid Uplink
EGPRS MCS5 RLC Data
Blocks]+[L9216:Total
Number of Valid Uplink
EGPRS MCS6 RLC Data
Blocks]+[L9217:Total
Number of Valid Uplink
EGPRS MCS7 RLC Data
Blocks]+[L9218:Total
Number of Valid Uplink
EGPRS MCS8 RLC Data
Blocks]+[L9219:Total
Number of Valid Uplink
EGPRS MCS9 RLC Data
Blocks])/[L9201:Total
Number of Uplink EGPRS
RLC Data Blocks]))*{100}
192
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Retransmission Rate
of Downlink EGPRS
RLC Data
Blocks(%)
none
Downlink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
({1}-(([L9311:Total Number
of Valid Downlink EGPRS
MCS1 RLC Data Blocks]+
[L9312:Total Number of Valid
Downlink EGPRS MCS2
RLC Data Blocks]+
[L9313:Total Number of Valid
Downlink EGPRS MCS3
RLC Data Blocks]+
[L9314:Total Number of Valid
Downlink EGPRS MCS4
RLC Data Blocks]+
[L9315:Total Number of Valid
Downlink EGPRS MCS5
RLC Data Blocks]+
[L9316:Total Number of Valid
Downlink EGPRS MCS6
RLC Data Blocks]+
[L9317:Total Number of Valid
Downlink EGPRS MCS7
RLC Data Blocks]+
[L9318:Total Number of Valid
Downlink EGPRS MCS8
RLC Data Blocks]+
[L9319:Total Number of Valid
Downlink EGPRS MCS9
RLC Data Blocks])/
[L9301:Total Number of
Downlink EGPRS RLC Data
Blocks]))*{100}
Rate of Uplink
GPRS RLC Coding
Scheme with
CS3&CS4(%)
none
Uplink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9008:Number of Valid
Uplink RLC Data Blocks
Using CS3]+[L9009:Number
of Valid Uplink RLC Data
Blocks Using CS4])/
([L9006:Number of Valid
Uplink RLC Data Blocks
Using CS1]+[L9007:Number
of Valid Uplink RLC Data
Blocks Using CS2]+
[L9008:Number of Valid
Uplink RLC Data Blocks
Using CS3]+[L9009:Number
of Valid Uplink RLC Data
Blocks Using CS4])*{100}
193
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Rate of Downlink
GPRS RLC Coding
Scheme with
CS3&CS4(%)
none
Downlink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9108:Total Number of
Valid RLC Downlink Data
Blocks Using CS3]+
[L9109:Total Number of Valid
RLC Downlink Data Block
Using CS4])/([L9106:Total
Number of Valid RLC
Downlink Data Blocks Using
CS1]+[L9107:Total Number
of Valid RLC Downlink Data
Blocks Using CS2]+
[L9108:Total Number of Valid
RLC Downlink Data Blocks
Using CS3]+[L9109:Total
Number of Valid RLC
Downlink Data Block Using
CS4])*{100}
194
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Rate of Uplink
EGPRS RLC
Coding Scheme with
MCS7&MCS8&MC
S9(%)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9217:Total Number of
Valid Uplink EGPRS MCS7
RLC Data Blocks]+
[L9218:Total Number of Valid
Uplink EGPRS MCS8 RLC
Data Blocks]+[L9219:Total
Number of Valid Uplink
EGPRS MCS9 RLC Data
Blocks])/([L9211:Total
Number of Valid Uplink
EGPRS MCS1 RLC Data
Blocks]+[L9212:Total
Number of Valid Uplink
EGPRS MCS2 RLC Data
Blocks]+[L9213:Total
Number of Valid Uplink
EGPRS MCS3 RLC Data
Blocks]+[L9214:Total
Number of Valid Uplink
EGPRS MCS4 RLC Data
Blocks]+[L9215:Total
Number of Valid Uplink
EGPRS MCS5 RLC Data
Blocks]+[L9216:Total
Number of Valid Uplink
EGPRS MCS6 RLC Data
Blocks]+[L9217:Total
Number of Valid Uplink
EGPRS MCS7 RLC Data
Blocks]+[L9218:Total
Number of Valid Uplink
EGPRS MCS8 RLC Data
Blocks]+[L9219:Total
Number of Valid Uplink
EGPRS MCS9 RLC Data
Blocks])*{100}
195
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Rate of Downlink
EGPRS RLC
Coding Scheme with
MCS7&MCS8&MC
S9(%)
none
Downlink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9317:Total Number of
Valid Downlink EGPRS
MCS7 RLC Data Blocks]+
[L9318:Total Number of Valid
Downlink EGPRS MCS8
RLC Data Blocks]+
[L9319:Total Number of Valid
Downlink EGPRS MCS9
RLC Data Blocks])/
([L9311:Total Number of
Valid Downlink EGPRS
MCS1 RLC Data Blocks]+
[L9312:Total Number of Valid
Downlink EGPRS MCS2
RLC Data Blocks]+
[L9313:Total Number of Valid
Downlink EGPRS MCS3
RLC Data Blocks]+
[L9314:Total Number of Valid
Downlink EGPRS MCS4
RLC Data Blocks]+
[L9315:Total Number of Valid
Downlink EGPRS MCS5
RLC Data Blocks]+
[L9316:Total Number of Valid
Downlink EGPRS MCS6
RLC Data Blocks]+
[L9317:Total Number of Valid
Downlink EGPRS MCS7
RLC Data Blocks]+
[L9318:Total Number of Valid
Downlink EGPRS MCS8
RLC Data Blocks]+
[L9319:Total Number of Valid
Downlink EGPRS MCS9
RLC Data Blocks])*{100}
196
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Uplink GPRS
RLC per
PDCH(kbps)
none
Uplink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9006:Number of Valid
Uplink RLC Data Blocks
Using CS1]*{23}+
[L9007:Number of Valid
Uplink RLC Data Blocks
Using CS2]*{34}+
[L9008:Number of Valid
Uplink RLC Data Blocks
Using CS3]*{40}+
[L9009:Number of Valid
Uplink RLC Data Blocks
Using CS4]*{54})*{8}/
({1024}*[L9001:Total
Number of Uplink GPRS RLC
Data Blocks]*{20}/{1000})
Average Throughput
of Downlink GPRS
RLC per
PDCH(kbps)
none
Downlink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9106:Total Number of
Valid RLC Downlink Data
Blocks Using CS1]*{23}+
[L9107:Total Number of Valid
RLC Downlink Data Blocks
Using CS2]*{34}+
[L9108:Total Number of Valid
RLC Downlink Data Blocks
Using CS3]*{40}+
[L9109:Total Number of Valid
RLC Downlink Data Block
Using CS4]*{54})*{8}/
({1024}*[L9101:Total
Number of Downlink GPRS
RLC Data Blocks]*{20}/
{1000})
197
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Uplink EGPRS
RLC per
PDCH(kbps)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
(([L9211:Total Number of
Valid Uplink EGPRS MCS1
RLC Data Blocks]*{22}+
[L9212:Total Number of Valid
Uplink EGPRS MCS2 RLC
Data Blocks]*{28}+
[L9213:Total Number of Valid
Uplink EGPRS MCS3 RLC
Data Blocks]*{37}+
[L9214:Total Number of Valid
Uplink EGPRS MCS4 RLC
Data Blocks]*{44}+
[L9215:Total Number of Valid
Uplink EGPRS MCS5 RLC
Data Blocks]*{56}+
[L9216:Total Number of Valid
Uplink EGPRS MCS6 RLC
Data Blocks]*{74}+
[L9217:Total Number of Valid
Uplink EGPRS MCS7 RLC
Data Blocks]*{56}+
[L9218:Total Number of Valid
Uplink EGPRS MCS8 RLC
Data Blocks]*{68}+
[L9219:Total Number of Valid
Uplink EGPRS MCS9 RLC
Data Blocks]*{74})*{8})/
(({1024}*([L9202:Total
Number of Uplink EGPRS
MCS1 RLC Data Blocks]+
[L9203:Total Number of
Uplink EGPRS MCS2 RLC
Data Blocks]+[L9204:Total
Number of Uplink EGPRS
MCS3 RLC Data Blocks]+
[L9205:Total Number of
Uplink EGPRS MCS4 RLC
Data Blocks]+[L9206:Total
Number of Uplink EGPRS
MCS5 RLC Data Blocks]+
[L9207:Total Number of
Uplink EGPRS MCS6 RLC
Data Blocks]+[L9208:Total
Number of Uplink EGPRS
MCS7 RLC Data Blocks]/
{2}+[L9209:Total Number of
Uplink EGPRS MCS8 RLC
Data Blocks]/{2}+
198
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[L9210:Total Number of
Uplink EGPRS MCS9 RLC
Data Blocks]/{2})*{20}/
{1000}))
Issue 01 (2016-09-15)
199
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Downlink EGPRS
RLC per
PDCH(kbps)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
(([L9311:Total Number of
Valid Downlink EGPRS
MCS1 RLC Data
Blocks]*{22}+[L9312:Total
Number of Valid Downlink
EGPRS MCS2 RLC Data
Blocks]*{28}+[L9313:Total
Number of Valid Downlink
EGPRS MCS3 RLC Data
Blocks]*{37}+[L9314:Total
Number of Valid Downlink
EGPRS MCS4 RLC Data
Blocks]*{44}+[L9315:Total
Number of Valid Downlink
EGPRS MCS5 RLC Data
Blocks]*{56}+[L9316:Total
Number of Valid Downlink
EGPRS MCS6 RLC Data
Blocks]*{74}+[L9317:Total
Number of Valid Downlink
EGPRS MCS7 RLC Data
Blocks]*{56}+[L9318:Total
Number of Valid Downlink
EGPRS MCS8 RLC Data
Blocks]*{68}+[L9319:Total
Number of Valid Downlink
EGPRS MCS9 RLC Data
Blocks]*{74})*{8})/
(({1024}*([L9302:Total
Number of Downlink EGPRS
MCS1 RLC Data Blocks]+
[L9303:Total Number of
Downlink EGPRS MCS2
RLC Data Blocks]+
[L9304:Total Number of
Downlink EGPRS MCS3
RLC Data Blocks]+
[L9305:Total Number of
Downlink EGPRS MCS4
RLC Data Blocks]+
[L9306:Total Number of
Downlink EGPRS MCS5
RLC Data Blocks]+
[L9307:Total Number of
Downlink EGPRS MCS6
RLC data blocks]+
[L9308:Total Number of
Downlink EGPRS MCS7
200
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 01 (2016-09-15)
Average Throughput
of Uplink GPRS
RLC per Cell(kbps)
none
Uplink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9006:Number of Valid
Uplink RLC Data Blocks
Using CS1]*{23}+
[L9007:Number of Valid
Uplink RLC Data Blocks
Using CS2]*{34}+
[L9008:Number of Valid
Uplink RLC Data Blocks
Using CS3]*{40}+
[L9009:Number of Valid
Uplink RLC Data Blocks
Using CS4]*{54})*{8}/
({1024}*[L9020:Total
Duration of Uplink GPRS
TBFs])
Average Throughput
of Downlink GPRS
RLC per Cell(kbps)
none
Downlink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9106:Total Number of
Valid RLC Downlink Data
Blocks Using CS1]*{23}+
[L9107:Total Number of Valid
RLC Downlink Data Blocks
Using CS2]*{34}+
[L9108:Total Number of Valid
RLC Downlink Data Blocks
Using CS3]*{40}+
[L9109:Total Number of Valid
RLC Downlink Data Block
Using CS4]*{54})*{8}/
({1024}*[L9121:Total
Duration of Downlink GPRS
TBFs])
201
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Uplink EGPRS
RLC per Cell(kbps)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9211:Total Number of
Valid Uplink EGPRS MCS1
RLC Data Blocks]*{22}+
[L9212:Total Number of Valid
Uplink EGPRS MCS2 RLC
Data Blocks]*{28}+
[L9213:Total Number of Valid
Uplink EGPRS MCS3 RLC
Data Blocks]*{37}+
[L9214:Total Number of Valid
Uplink EGPRS MCS4 RLC
Data Blocks]*{44}+
[L9215:Total Number of Valid
Uplink EGPRS MCS5 RLC
Data Blocks]*{56}+
[L9216:Total Number of Valid
Uplink EGPRS MCS6 RLC
Data Blocks]*{74}+
[L9217:Total Number of Valid
Uplink EGPRS MCS7 RLC
Data Blocks]*{56}+
[L9218:Total Number of Valid
Uplink EGPRS MCS8 RLC
Data Blocks]*{68}+
[L9219:Total Number of Valid
Uplink EGPRS MCS9 RLC
Data Blocks]*{74})*{8}/
({1024}*[L9235:Total
Duration of Uplink EGPRS
TBFs])
202
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Downlink EGPRS
RLC per Cell(kbps)
none
Downlink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9311:Total Number of
Valid Downlink EGPRS
MCS1 RLC Data
Blocks]*{22}+[L9312:Total
Number of Valid Downlink
EGPRS MCS2 RLC Data
Blocks]*{28}+[L9313:Total
Number of Valid Downlink
EGPRS MCS3 RLC Data
Blocks]*{37}+[L9314:Total
Number of Valid Downlink
EGPRS MCS4 RLC Data
Blocks]*{44}+[L9315:Total
Number of Valid Downlink
EGPRS MCS5 RLC Data
Blocks]*{56}+[L9316:Total
Number of Valid Downlink
EGPRS MCS6 RLC Data
Blocks]*{74}+[L9317:Total
Number of Valid Downlink
EGPRS MCS7 RLC Data
Blocks]*{56}+[L9318:Total
Number of Valid Downlink
EGPRS MCS8 RLC Data
Blocks]*{68}+[L9319:Total
Number of Valid Downlink
EGPRS MCS9 RLC Data
Blocks]*{74})*{8}/
({1024}*[L9336:Total
Duration of Downlink EGPRS
TBFs])
Average Throughput
of Uplink GPRS
LLC per User(kbps)
none
Uplink LLC
Data
Transfer
Capability
Measuremen
t
[L9422:Throughput of Uplink
GPRS Users LLC PDU]/
([L9421:Total Bytes of Uplink
GPRS Users LLC
PDUs]*{8}/{1024})
Average Throughput
of Downlink GPRS
LLC per User(kbps)
none
Downlink
LLC Data
Transfer
Capability
Measuremen
t
[L9526:Throughput of
Downlink GPRS Users LLC
PDU]/([L9525:Total Bytes of
Downlink GPRS Users LLC
PDU]*{8}/{1024})
203
PRS
Performance Report Reference
Subrep
ort
Name
PS
Resource
Usage
Ratio
KPI
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Uplink EGPRS
LLC per User(kbps)
none
Uplink LLC
Data
Transfer
Capability
Measuremen
t
[L9424:Throughput of Uplink
EGPRS Users LLC PDU]/
([L9423:Total Bytes of Uplink
EGPRS Users LLC
PDUs]*{8}/{1024})
Average Throughput
of Downlink EGPRS
LLC per User(kbps)
none
Downlink
LLC Data
Transfer
Capability
Measuremen
t
[L9528:Throughput of
Downlink EGPRS Users LLC
PDU]/([L9527:Total Bytes of
Downlink EGPRS Users LLC
PDU]*{8}/{1024})
Uplink PDTCH/
PACCH Utilization
Rate
none
Cell Radio
Channel
Capability
Measuremen
t
Downlink PDTCH/
PACCH Utilization
Rate
none
Cell Radio
Channel
Capability
Measuremen
t
PDCH Occupation
Rate
none
PDCH
Resource
Capability
Measuremen
t
[AR9311:Average Number of
Occupied PDCHs]/
[AR9303:Average Number of
Available PDCHs]*{100}
BSC Reclaimed
Dynamic PDCH
Rate
none
PDCH
Resource
Capability
Measuremen
t
[R9344:Number of Reclaimed
Busy Dynamic PDCHs]/
[R9343:Number of Reclaimed
Dynamic PDCHs]*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
204
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Whole
Network
KPI
Report
RCA313:Assignmen
t Success Rate
Assignment
Measuremen
t per Cell
K3043:TCH Seizure
Success Rate
KPI
Measuremen
t per Cell
RA303G:Success
Rate of Immediate
Assignments
Immediate
Assignment
Measuremen
t per Cell
RA301G:Success
Rate of Random
Access
Immediate
Assignment
Measuremen
t per Cell
205
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
TH323:Success Rate
of Incoming Internal
Inter-Cell Handovers
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303:Handover
Success Rate
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303A:Success
Rate of Radio
Handover
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
TH303:Success Rate
of Internal Intra-Cell
Handover
Intra-cell
Handover
Measuremen
t per Cell
ZTR104C:Call Drop
Rate on SDCCH
Call Drop
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per
cell(including
Handover)
Call Drop
Measuremen
t per Cell
ZTR304A:Call Drop
Rate on TCH per
cell(Excluding
Handover)
Call Drop
Measuremen
t per Cell
RR370:Congestion
Rate on SDCCH per
CELL (due to Busy)
Channel
Assignment
Failure
Measuremen
t per Cell
K3041:TCH
Congestion Rate
(Overflow)
KPI
Measuremen
t per Cell
206
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
K3045:Congestion
Rate on TCH (All
Channels Busy)
KPI
Measuremen
t per Cell
K3014:Traffic
Volume on TCH
Erl
KPI
Measuremen
t per Cell
K3004:Traffic
Volume on SDCCH
Erl
KPI
Measuremen
t per Cell
RR307:TCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
RR300:SDCCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
ZTR308:Traffic Call
Drop Ratio per cell
none
Channel
State
Measuremen
t per Cell
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Issue 01 (2016-09-15)
207
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
GSM
BSC KPI
Report
RCA313:Assignmen
t Success Rate
Assignment
Measuremen
t per Cell
K3043:TCH Seizure
Success Rate
KPI
Measuremen
t per Cell
RA303G:Success
Rate of Immediate
Assignments
Immediate
Assignment
Measuremen
t per Cell
RA301G:Success
Rate of Random
Access
Immediate
Assignment
Measuremen
t per Cell
TH323:Success Rate
of Incoming Internal
Inter-Cell Handovers
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303:Handover
Success Rate
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303A:Success
Rate of Radio
Handover
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
TH303:Success Rate
of Internal Intra-Cell
Handover
Intra-cell
Handover
Measuremen
t per Cell
ZTR104C:Call Drop
Rate on SDCCH
Call Drop
Measuremen
t per Cell
208
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
ZTR304A:Call Drop
Rate on TCH per
cell(Excluding
Handover)
Call Drop
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per
cell(including
Handover)
Call Drop
Measuremen
t per Cell
RR370:Congestion
Rate on SDCCH per
CELL (due to Busy)
Channel
Assignment
Failure
Measuremen
t per Cell
K3041:TCH
Congestion Rate
(Overflow)
KPI
Measuremen
t per Cell
K3045:Congestion
Rate on TCH (All
Channels Busy)
KPI
Measuremen
t per Cell
K3014:Traffic
Volume on TCH
Erl
KPI
Measuremen
t per Cell
K3004:Traffic
Volume on SDCCH
Erl
KPI
Measuremen
t per Cell
RR307:TCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
RR300:SDCCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
ZTR308:Traffic Call
Drop Ratio per cell
none
Channel
State
Measuremen
t per Cell
209
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Retainabi
lity
Report
ZTR304A:Call Drop
Rate on TCH per
cell(Excluding
Handover)
Call Drop
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per
cell(including
Handover)
Call Drop
Measuremen
t per Cell
ZTR104C:Call Drop
Rate on SDCCH
Call Drop
Measuremen
t per Cell
RM317:Call Drop
Rate on TCHF per
cell
Call Drop
Measuremen
t per Cell
RM327:Call Drop
Rate on TCHH per
cell
Call Drop
Measuremen
t per Cell
210
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RM330:Call Drop
Rate on TCH on the
TRX in the
Underlaid Subcell
Call Drop
Measuremen
t per Cell
RM330a:Call Drop
Rate on TCH on the
TRX in the
OverLaid Subcell
Call Drop
Measuremen
t per Cell
ZTR308:Traffic Call
Drop Ratio per cell
none
Channel
State
Measuremen
t per Cell
ZTR104B:Call Drop
Rate on SDCCH
(Call Type)
SDCCH Call
Drop
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Issue 01 (2016-09-15)
211
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Extra
Busy
Cell
Report
R3550N:Traffic
Volume of Signaling
Channels (TCH)
Erl
Channel
State
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Extra
Idle Cell
Report
R3550N:Traffic
Volume of Signaling
Channels (TCH)
Erl
Channel
State
Measuremen
t per Cell
212
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Call
Drop
Cell
Report
ZTR304A:Call Drop
Rate on TCH per
cell(Excluding
Handover)
Call Drop
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per
cell(including
Handover)
Call Drop
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
213
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accessib
ility
Report
RA303G:Success
Rate of Immediate
Assignments
Immediate
Assignment
Measuremen
t per Cell
K3100:Immediate
Assignment
Requests
times
KPI
Measuremen
t per Cell
A9503:Number of
Uplink PS
Immediate
Assignments
times
Packet
Assignment
Capability
Measuremen
t
A9504:Number of
Successful Uplink
PS Immediate
Assignments
times
Packet
Assignment
Capability
Measuremen
t
A9509:Number of
Downlink PS
Immediate
Assignments
times
Packet
Assignment
Capability
Measuremen
t
A9510:Number of
Successful
Downlink PS
Immediate
Assignments
times
Packet
Assignment
Capability
Measuremen
t
214
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
R3100A:Channel
Assignment
Requests in
Immediate
Assignment
Procedure (SDCCH)
times
Channel
Assignment
Request
Measuremen
t per Cell
R3109A:Channel
Assignment
Requests in
Immediate
Assignment
Procedure (TCH)
times
Channel
Assignment
Request
Measuremen
t per Cell
K3010A:TCH
Seizure Requests
(Traffic Channel)
times
KPI
Measuremen
t per Cell
K3043:TCH Seizure
Success Rate
KPI
Measuremen
t per Cell
K3021:Failed TCH
Seizures due to Busy
TCH (Signaling
Channel)
times
KPI
Measuremen
t per Cell
K3023:Successful
TCH Seizures
(Signaling Channel)
times
KPI
Measuremen
t per Cell
ZTR104C:Call Drop
Rate on SDCCH
Call Drop
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
215
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Whole
Network
KPI
Report
RCA313:Assignmen
t Success Rate
Assignment
Measuremen
t per Cell
K3043:TCH Seizure
Success Rate
KPI
Measuremen
t per Cell
RA303G:Success
Rate of Immediate
Assignments
Immediate
Assignment
Measuremen
t per Cell
RA301G:Success
Rate of Random
Access
Immediate
Assignment
Measuremen
t per Cell
TH323:Success Rate
of Incoming Internal
Inter-Cell Handovers
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303:Handover
Success Rate
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
216
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
RH303A:Success
Rate of Radio
Handover
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
TH303:Success Rate
of Internal Intra-Cell
Handover
Intra-cell
Handover
Measuremen
t per Cell
ZTR104C:Call Drop
Rate on SDCCH
Call Drop
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per
cell(including
Handover)
Call Drop
Measuremen
t per Cell
ZTR304A:Call Drop
Rate on TCH per
cell(Excluding
Handover)
Call Drop
Measuremen
t per Cell
RR370:Congestion
Rate on SDCCH per
CELL (due to Busy)
Channel
Assignment
Failure
Measuremen
t per Cell
K3041:TCH
Congestion Rate
(Overflow)
KPI
Measuremen
t per Cell
K3045:Congestion
Rate on TCH (All
Channels Busy)
KPI
Measuremen
t per Cell
K3014:Traffic
Volume on TCH
Erl
KPI
Measuremen
t per Cell
K3004:Traffic
Volume on SDCCH
Erl
KPI
Measuremen
t per Cell
217
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RR307:TCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
RR300:SDCCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
ZTR308:Traffic Call
Drop Ratio per cell
none
Channel
State
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Issue 01 (2016-09-15)
218
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Mobility
Report
RH303:Handover
Success Rate
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H3122C:Number of
Unsuccessful
Outgoing Internal
Inter-Cell Handovers
(Uplink Strength)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H3122B:Number of
Unsuccessful
Outgoing Internal
Inter-Cell Handovers
(Downlink Quality)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H3122A:Number of
Unsuccessful
Outgoing Internal
Inter-Cell Handovers
(Uplink Quality)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H311B:Number of
Outgoing Internal
Inter-Cell Handover
Commands
(Downlink Quality)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H310O:Number of
Outgoing Internal
Inter-Cell Handover
Requests (MS
Handover in the
Overlaid Subcell
Covered by the
Enhanced Dualband
Network)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
219
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
H310N:Number of
Outgoing Internal
Inter-Cell Handover
Requests (Overlaid
to Underlaid Subcell
in Enhanced
Dualband Network)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H310M:Number of
Outgoing Internal
Inter-Cell Handover
Requests (Underlaid
to Overlaid Subcell
in Enhanced
Dualband Network)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H310F:Number of
Outgoing Internal
Inter-Cell Handover
Requests (Better
Cell)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H310G:Number of
Outgoing Internal
Inter-Cell Handover
Requests (Load)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H310H:Number of
Outgoing Internal
Inter-Cell Handover
Requests (Rapid
Level Drop)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H3100Y:Number of
Outgoing Internal
Inter-Cell Handover
Requests (SDCCH)
(Excluding Directed
Retry)
(900/850/810-1800/
1900)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
220
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CH370a:Number of
Successful Outgoing
Internal Inter-Cell
Handovers During
BSC Local Switch
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
CH370b:Number of
Successful Outgoing
Internal Inter-Cell
Handovers During
BTS Local Switch
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
CH312C:Number of
Unsuccessful
Outgoing Internal
Inter-Cell Handovers
(Timer Expired)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Issue 01 (2016-09-15)
221
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Congesti
on Cell
Report
K3045:Congestion
Rate on TCH (All
Channels Busy)
KPI
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Resource
Utilizatio
n Report
RR307:TCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
K3015:Available
TCHs
numb
er
KPI
Measuremen
t per Cell
222
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
K3005:Available
SDCCHs
numb
er
KPI
Measuremen
t per Cell
K3006:Configured
SDCCHs
numb
er
KPI
Measuremen
t per Cell
K3016:Configured
TCHs
numb
er
KPI
Measuremen
t per Cell
RCA313:Assignmen
t Success Rate
Assignment
Measuremen
t per Cell
A3157A:Failed
Mode Modify
Attempts (MOC)
(TCHF)
times
Assignment
Measuremen
t per Cell
A3157C:Failed
Mode Modify
Attempts (MTC)
(TCHF)
times
Assignment
Measuremen
t per Cell
A3158A:Failed
Mode Modify
Attempts (MOC)
(TCHH)
times
Assignment
Measuremen
t per Cell
A3158C:Failed
Mode Modify
Attempts (MTC)
(TCHH)
times
Assignment
Measuremen
t per Cell
S422:Number of
Attemps in
Interference Band
numb
er
Interference
Band
Measuremen
t per TRX
R3134:Failed
Queuing Attempts
due to Queue
Overflow
times
Channel
Assignment
Queue
Measuremen
t per Cell
223
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
CR313C:Failed
Queuing Attempts
times
Channel
Assignment
Queue
Measuremen
t per Cell
K3004:Traffic
Volume on SDCCH
Erl
KPI
Measuremen
t per Cell
K3014:Traffic
Volume on TCH
Erl
KPI
Measuremen
t per Cell
K3034:TCHH
Traffic Volume
Erl
KPI
Measuremen
t per Cell
R3550N:Traffic
Volume of Signaling
Channels (TCH)
Erl
Channel
State
Measuremen
t per Cell
R3550M:Traffic
Volume of Signaling
Channels (SDCCH)
Erl
Channel
State
Measuremen
t per Cell
R3550L:Traffic
Volume of Unknown
Service on SDCCH
Erl
Channel
State
Measuremen
t per Cell
R3550J:Traffic
Volume of USSD
Service on SDCCH
Erl
Channel
State
Measuremen
t per Cell
R3550I:Traffic
Volume of Short
Message Service on
SDCCH
Erl
Channel
State
Measuremen
t per Cell
R3550H:Traffic
Volume of Speech
Service on SDCCH
Erl
Channel
State
Measuremen
t per Cell
224
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Worst
Cell
Report
R3550N:Traffic
Volume of Signaling
Channels (TCH)
Erl
Channel
State
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per
cell(including
Handover)
Call Drop
Measuremen
t per Cell
ZTR304A:Call Drop
Rate on TCH per
cell(Excluding
Handover)
Call Drop
Measuremen
t per Cell
K3041:TCH
Congestion Rate
(Overflow)
KPI
Measuremen
t per Cell
225
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6000(GSMR)
Object Type
GBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BTS
Traffic
and
Energy
Consump
tion
Report
Energy
Consumption(kwh)
none
Site Power
Consumption
Measuremen
t (for Site)
[CR2791:BTS Power
Consumption by Adding
Static Power Consumption]
CS Traffic(Erl)
none
KPI
Measuremen
t per Cell
[K3014:Traffic Volume on
TCH]+[K3004:Traffic Volume
on SDCCH]
PS Traffic(kbit)
none
Downlink
LLC Data
Transfer
Capabilty
Measuremen
t
[L9503:Total Bytes of
Downlink LLC PDUs
Received]*{8}/{1000}
226
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Total Traffic(kbit)
none
KPI
Measuremen
t per Cell
([K3034:TCHH Traffic
Volume]*{11.4}*{GP}*{60}+
([K3014:Traffic Volume on
TCH]-[K3034:TCHH Traffic
Volume]-[AR3551C:Traffic
Volume on AMR TCHFs][AR3552C:Traffic Volume on
AMR
TCHHs])*{22.8}*{GP}*{60}
+[AR3551C:Traffic Volume
on AMR
TCHFs]*{22.8}*{GP}*{60}+
[AR3552C:Traffic Volume on
AMR
TCHHs]*{22.8}*{GP}*{60}
)*{0.7}+[K3004:Traffic
Volume on
SDCCH]*{22.8}*{GP}*{60}
+[L9503:Total Bytes of
Downlink LLC PDUs
Received]*{8}/{1000}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6000(GSMR)
Object Type
GBSC
Issue 01 (2016-09-15)
227
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Network
Energy
Efficienc
y
Indicator
Report
EE(bit/joule)
none
KPI
Measuremen
t per Cell
(([K3034:TCHH Traffic
Volume]*{11.4}*{GP}*{60}+
([K3014:Traffic Volume on
TCH]-[K3034:TCHH Traffic
Volume]-[AR3551C:Traffic
Volume on AMR TCHFs][AR3552C:Traffic Volume on
AMR
TCHHs])*{22.8}*{GP}*{60}
+[AR3551C:Traffic Volume
on AMR
TCHFs]*{22.8}*{GP}*{60}+
[AR3552C:Traffic Volume on
AMR
TCHHs]*{22.8}*{GP}*{60}
)*{0.7}+[K3004:Traffic
Volume on
SDCCH]*{22.8}*{GP}*{60}
+[L9503:Total Bytes of
Downlink LLC PDUs
Received]*{8}/{1000})/
[CR2791:BTS Power
Consumption by Adding
Static Power Consumption]/
{3600}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
228
PRS
Performance Report Reference
Issue 01 (2016-09-15)
229
PRS
Performance Report Reference
NE Type
2GBSC
Object Type
GCell Group
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
GSM
Interoper
ations
Report
CH350:Outgoing
Inter-RAT Inter-Cell
Handover Requests
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
CH351:Outgoing
Inter-RAT Inter-Cell
Handover
Commands
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
CH353:Successful
Outgoing Inter-RAT
Inter-Cell Handovers
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
GSM Voice
Outgoing Inter-RAT
Inter-Cell Handover
Preparation Success
Rate
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
[CH351:Outgoing Inter-RAT
Inter-Cell Handover
Commands]/
[CH350:Outgoing Inter-RAT
Inter-Cell Handover Requests]
230
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
GSM Voice
Outgoing Inter-RAT
Inter-Cell Handover
Success Rate
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
[CH353:Successful Outgoing
Inter-RAT Inter-Cell
Handovers]/[CH351:Outgoing
Inter-RAT Inter-Cell
Handover Commands]
CH360:Incoming
Inter-RAT Inter-Cell
Handover Requests
none
Incoming
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
CH361:Incoming
Inter-RAT Inter-Cell
Handover Responses
none
Incoming
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
CH363:Successful
Incoming Inter-RAT
Inter-Cell Handovers
none
Incoming
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
Success Rate of
Preparation for
Incoming Inter-RAT
Inter-Cell Handover
Incoming
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
[CH361:Incoming Inter-RAT
Inter-Cell Handover
Responses]/[CH360:Incoming
Inter-RAT Inter-Cell
Handover Requests]
Success Rate of
Preparation for
Incoming Inter-RAT
Inter-Cell Radio
Handover
Incoming
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
[CH363:Successful Incoming
Inter-RAT Inter-Cell
Handovers]/[CH361:Incoming
Inter-RAT Inter-Cell
Handover Responses]
231
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell Group
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
UMTS
Interoper
ations
Report
Number of
Preparation
Attempts for CS
Outgoing Inter-RAT
Handover for Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful
Preparations for CS
Outgoing Inter-RAT
Handover for Cell
none
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.SuccR
elocPrepOutCS.Cell.
Rate
InterRAT
Handover
Measuremen
t per cell
[Number of Successful
Preparations for CS Outgoing
Inter-RAT Handover for Cell]/
[Number of Preparation
Attempts for CS Outgoing
Inter-RAT Handover for
Cell]*{100.00}
Number of CS
Outgoing Inter-RAT
Handover Attempts
none
InterRAT
Handover
Measuremen
t per cell
232
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of
Successful CS
Outgoing Inter-RAT
Handovers for Cell
none
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[Number of Successful CS
Outgoing Inter-RAT
Handovers for Cell]/[Number
of CS Outgoing Inter-RAT
Handover
Attempts]*{100.00}
Number of PS
Outgoing Inter-RAT
Handover Attempts
Initiated by RNC for
Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful PS
Outgoing Inter-RAT
Handovers Initiated
by RNC for Cell
none
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.SuccO
utPSUNTRAN.Cell.
Rate
InterRAT
Handover
Measuremen
t per cell
[Number of Successful PS
Outgoing Inter-RAT
Handovers Initiated by RNC
for Cell]/[Number of PS
Outgoing Inter-RAT Handover
Attempts Initiated by RNC for
Cell]*{100.00}
Number of
Preparations for CS
Incoming Inter-RAT
Handover for Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful
preparations for CS
Incoming Inter-RAT
Handovers for Cell
none
InterRAT
Handover
Measuremen
t per cell
Success Rate of
preparations for CS
Incoming Inter-RAT
Handovers for Cell
InterRAT
Handover
Measuremen
t per cell
[Number of Successful
preparations for CS Incoming
Inter-RAT Handovers for
Cell]/[Number of Preparations
for CS Incoming Inter-RAT
Handover for Cell]*{100}
233
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of CS
Incoming Inter-RAT
Handover Attempts
for Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful CS
Incoming Inter-RAT
Handovers for Cell
none
InterRAT
Handover
Measuremen
t per cell
Success Rate of CS
Incoming Inter-RAT
Handovers for Cell
InterRAT
Handover
Measuremen
t per cell
[Number of Successful CS
Incoming Inter-RAT
Handovers for Cell]/[Number
of CS Incoming Inter-RAT
Handover Attempts for
Cell]*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
GCell Group
Issue 01 (2016-09-15)
234
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
GSM
CoRRM
Report
H350M:Outgoing
Inter-RAT Inter-Cell
Handover
Requests(service
based handover)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H351M:Outgoing
Inter-RAT Inter-Cell
Handover
Commands(service
based handover)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352M:Failed
Outgoing Inter-RAT
Inter-Cell
Handovers(service
based handover)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H350G:Outgoing
Inter-RAT Inter-Cell
Handover
Requests(load based
handover)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H351G:Outgoing
Inter-RAT Inter-Cell
Handover
Commands(load
based handover)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352N:Number of
Failed Outgoing
Inter-RAT Inter-Cell
Handovers (Target
Cell Traffic Load
Higher)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
235
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell Group
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
UMTS
CoRRM
Report
Number of
Successful CS
Outgoing Inter-RAT
Handovers Based on
Load for Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Preparation
Attempts for CS
Outgoing Inter-RAT
Handover Initiated
by UTRAN Based
on Load for Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful
Preparations for CS
Outgoing Inter-RAT
Handover Initiated
by UTRAN Based
on Load for Cell
none
InterRAT
Handover
Measuremen
t per cell
236
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of
Preparation
Attempts for CS
Outgoing Inter-RAT
Handover Based on
RF (Coverage, QoS,
or HCS) for Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful
Preparations for CS
Outgoing Inter-RAT
Handover Based on
RF (Coverage, QoS,
or HCS) for Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful CS
Outgoing Inter-RAT
Handovers Based on
Service Type for
Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Preparation
Attempts for CS
Outgoing Inter-RAT
Handover Based on
Service Type for
Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful
Preparations for CS
Outgoing Inter-RAT
Handover Based on
Service Type for
Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful CS
Outgoing Inter-RAT
Handovers Based on
Directed Retry for
Cell
none
InterRAT
Handover
Measuremen
t per cell
237
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of
Preparation
Attempts for CS
Outgoing Inter-RAT
Handover Based on
Directed Retry for
Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful
Preparations for CS
Outgoing Inter-RAT
Handover Based on
Directed Retry for
Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of PS
Outgoing Inter-RAT
Handover Attempts
Initiated by UTRAN
Based on Load for
Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful PS
Outgoing Inter-RAT
Handovers Initiated
by UTRAN Based
on Load for Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of PS
Outgoing Inter-RAT
Handover Attempts
Initiated by the RNC
Based on Service
Type for Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful PS
Outgoing Inter-RAT
Handovers Initiated
by the RNC Based
on Service Type for
Cell
none
InterRAT
Handover
Measuremen
t per cell
238
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
GCell Group
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
GSM
Power
Sharing
Report
GU1000:Number of
Times That GSM
Shares Power with
UMTS
none
GU Power
Sharing
Measuremen
t for TRX
GU1001:Number of
Times That GSM
Takes Power Back
from UMTS
none
GU Power
Sharing
Measuremen
t for TRX
GU1002:Total
Duration That GSM
Shares Power with
UMTS
GU Power
Sharing
Measuremen
t for TRX
GU1003:Total
Power That GSM
Shares with UMTS
none
GU Power
Sharing
Measuremen
t for TRX
GU1004:Average
Power that GSM
Shares with UMTS
milli
watt
GU Power
Sharing
Measuremen
t for TRX
239
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
GU1005:Number of
GU Power Sharing
Periods
none
GU Power
Sharing
Measuremen
t for TRX
GU1006:Total
Remaining
Shareable Power of
a GSM TRX
milli
watt
GU Power
Sharing
Measuremen
t for TRX
GU1007:Average
Remaining
Shareable Power of
a GSM TRX
milli
watt
GU Power
Sharing
Measuremen
t for TRX
GU1008:Number of
Times of Power
Insufficiency After
GSM Shares Power
with UMTS
none
GU Power
Sharing
Measuremen
t for TRX
GU1009:Number of
Timeslots that GSM
Shares Power with
UMTS
none
GU Power
Sharing
Measuremen
t for TRX
GU1010:GSM
Power Insufficiency
Rate After GSM
Shares Power with
UMTS
none
GU Power
Sharing
Measuremen
t for TRX
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Issue 01 (2016-09-15)
240
PRS
Performance Report Reference
NE Type
3GRNC
Object Type
UCell Group
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
UMTS
Power
Sharing
Report(R
NC
counter)
Mean Non-HSDPA
Transmitted Carrier
Power for Cell
dBm
Cell TX and
RX Power
Measuremen
t per cell
dBm
Cell TX and
RX Power
Measuremen
t per cell
dBm
Cell TX and
RX Power
Measuremen
t per cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell Group
Issue 01 (2016-09-15)
241
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
UMTS
Power
sharing
Report(N
odeB
counter)
VS.DataOutput.User
Data
bit/s
HSDPA
Measuremen
ts per Local
Cell
VS.PdschPwrRatio.
Mean
per
mill
HSDPA
Measuremen
ts per Local
Cell
VS.PdschPwrRatio.
Max
per
mill
HSDPA
Measuremen
ts per Local
Cell
VS.PdschPwrRatio.
Min
per
mill
HSDPA
Measuremen
ts per Local
Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
6.1.8 Success Rate of Preparation for Outgoing Inter-RAT InterCell Handover Analysis
Report Type
Simple Report
NE Type
2GBSC
Object Type
GCell
Issue 01 (2016-09-15)
242
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Success
Rate of
Preparati
on for
Outgoing
InterRAT
InterCell
Handove
r
Analysis
H352Ka:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Handover Request
Rejected) (OM
Intervention)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Kb:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Handover Request
Rejected)
(Equipment Failure)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Kc:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Handover Request
Rejected) (No Radio
Resource Available)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Kd:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Handover Request
Rejected)
(Requested
Terrestrial Resource
Unavailable)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Ke:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Handover Request
Rejected) (BSS not
Equipped)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Kf:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Handover Request
Rejected) (Invalid
Cell)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
243
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
H352Kg:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Handover Request
Rejected)
(Requested
Transcoding/Rate
Adaption
Unavailable)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Kh:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Handover Request
Rejected) (Circuit
Pool Mismatch)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Ki:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Handover Request
Rejected)
(Requested Speech
Version Unavailable)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Kj:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Handover Request
Rejected) (Ciphering
Algorithm not
Supported)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Kk:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Handover Request
Rejected)
(Terrestrial circuit
already allocated)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Kl:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Handover Request
Rejected) (Invalid
Message)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
244
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
H352Km:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Handover Request
Rejected) (Protocol
Error between BSS
and MSC)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Kn:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Handover Request
Rejected) (Other
Causes)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Ha:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Clear Commands
Sent By MSC)
(Radio Interface
Message Failure)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Hb:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Clear Commands
Sent By MSC)
(Radio Interface
Failure)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Hc:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Clear Commands
Sent By MSC) (OM
Intervention)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Hd:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Clear Commands
Sent By MSC)
(Equipment Failure)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
245
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
H352He:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Clear Commands
Sent By MSC)
(Preemption)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Hf:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Clear Commands
Sent By MSC)
(Invalid Message)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Hg:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Clear Commands
Sent By MSC)
(Protocol Error
between BSS and
MSC)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Hh:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Clear Commands
Sent By MSC)
(Other Causes)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352G:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(A Interface Failure)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352L:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(T7 Expired)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
246
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
6.1.9 Success Rate of Preparation for Outgoing Inter-RAT InterCell Radio Handover Analysis
Report Type
Simple Report
NE Type
2GBSC
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Success
Rate of
Preparati
on for
Outgoing
InterRAT
InterCell
Radio
Handove
r
Analysis
H352Da:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Reconnection to
Old Channels)
(Abnormal Release,
Unspecified)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Db:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Reconnection to
Old Channels)
(Abnormal Release,
Channel
Unacceptable)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
247
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
H352Dc:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Reconnection to
Old Channels)
(Abnormal Release,
Timer Expired)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Dd:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Reconnection to
Old Channels)
(Abnormal Release,
No Activity on the
Radio Path)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352De:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Reconnection to
Old Channels)
(Preemptive
Release)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Df:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Reconnection to
Old Channels)
(Handover Failed,
Timing Advance out
of Range)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Dg:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Reconnection to
Old Channels)
(Channel Mode
Unavailable)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Dh:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Reconnection to
Old Channels)
(Frequency
Unavailable)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
248
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
H352Di:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Reconnection to
Old Channels) (Call
Already Cleared)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Dj:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Reconnection to
Old Channels)
(Semantically
Incorrect Message)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Dk:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Reconnection to
Old Channels)
(Invalid Mandatory
Information)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Dl:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Reconnection to
Old Channels)
(Message Type Nonexistent or Not
Implemented)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Dm:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Reconnection to
Old Channels)
(Message Type Not
Compatible with
Protocol State)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Dn:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Reconnection to
Old Channels)
(Conditional IE
Error)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
249
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
H352Do:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Reconnection to
Old Channels) (No
Cell Allocation
Available)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Dp:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Reconnection to
Old Channels)
(Protocol Error
Unspecified)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352Dq:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(Reconnection to
Old Channels)
(Other Causes)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352C:Failed
Outgoing Inter-RAT
Inter-Cell Handovers
(T8 Expired)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
6.1.10 Success Rate of Preparation for Incoming Inter-RAT InterCell Handover Analysis
Report Type
Simple Report
Issue 01 (2016-09-15)
250
PRS
Performance Report Reference
NE Type
2GBSC
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Success
Rate of
Preparati
on for
Incoming
InterRAT
InterCell
Handove
r
Analysis
H362J:Failed
Incoming Inter-RAT
Inter-Cell Handovers
(Invalid Message)
none
Incoming
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H3620A:Failed
Incoming Inter-RAT
Inter-Cell Handovers
(No Channel
Available) (SDCCH)
none
Incoming
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H3629A:Failed
Incoming Inter-RAT
Inter-Cell Handovers
(No Channel
Available) (TCH)
none
Incoming
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H362E:Failed
Incoming Inter-RAT
Inter-Cell Handovers
(CIC Unavailable)
none
Incoming
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H362F:Failed
Incoming Inter-RAT
Inter-Cell Handovers
(CIC Allocated)
none
Incoming
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
251
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
H362B:Failed
Incoming Inter-RAT
Inter-Cell Handovers
(Terrestrial Resource
Request Failed)
none
Incoming
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H362L:Failed
Incoming Inter-RAT
Inter-Cell Handovers
(Requested Speech
Version Unavailable)
none
Incoming
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
6.1.11 Success Rate of Preparation for Incoming Inter-RAT InterCell Radio Handover Analysis
Report Type
Simple Report
NE Type
2GBSC
Object Type
GCell
Issue 01 (2016-09-15)
252
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Success
Rate of
Preparati
on for
Incoming
InterRAT
InterCell
Radio
Handove
r
Analysis
H362H:Failed
Incoming Inter-RAT
Inter-Cell Handovers
(Clear Commands
Sent By MSC)
none
Incoming
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H3620C:Failed
Incoming Inter-RAT
Inter-Cell Handovers
(Timer Expired)
(SDCCH)
none
Incoming
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H3629Cb:Failed
Incoming Inter-RAT
Inter-Cell Handovers
(Timer Expired)
(TCH) (Signaling
Channel)
none
Incoming
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H3629Ca:Failed
Incoming Inter-RAT
Inter-Cell Handovers
(Timer Expired)
(TCH) (Traffic
Channel)
none
Incoming
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Issue 01 (2016-09-15)
253
PRS
Performance Report Reference
NE Type
3GRNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Success
Rate of
Preparati
ons for
CS
Outgoing
InterRAT
Handove
r for Cell
Analysis
Number of Failed
Preparations for CS
Outgoing Inter-RAT
Handover for Cell
(TRELOCalloc
expiry)
none
InterRAT
Handover
Measuremen
t per cell
Number of Failed
Preparations for CS
Outgoing Inter-RAT
Handover for Cell
(Relocation Failure
in Target CN/RNC
or Target System)
none
InterRAT
Handover
Measuremen
t per cell
Number of Failed
Preparations for CS
Outgoing Inter-RAT
Handover for Cell
(Relocation not
supported in Target
RNC or Target
system)
none
InterRAT
Handover
Measuremen
t per cell
Number of Failed
Preparations for CS
Outgoing Inter-RAT
Handover for Cell
(Traffic Load In The
Target Cell Higher
Than In The Source
Cell)
none
InterRAT
Handover
Measuremen
t per cell
Number of Failed
Preparations for CS
Outgoing Inter-RAT
Handover for Cell
(No Resource
Available)
none
InterRAT
Handover
Measuremen
t per cell
254
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Failed
Preparations for CS
Outgoing Inter-RAT
Handover for Cell
(Unknown Target
RNC)
none
InterRAT
Handover
Measuremen
t per cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Success
Rate of
CS
Outgoing
InterRAT
Handove
rs for
Number of Failed
CS Outgoing InterRAT Handovers for
Cell (Configuration
Unsupported)
none
InterRAT
Handover
Measuremen
t per cell
255
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Cell
Analysis
Number of Failed
CS Outgoing InterRAT Handovers for
Cell (Physical
Channel Failure)
none
InterRAT
Handover
Measuremen
t per cell
Number of Times
that the Timer
Waiting for Iu
Release Command
Expires in CS
Outgoing Inter-RAT
Handover for Cell
none
InterRAT
Handover
Measuremen
t per cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell
Issue 01 (2016-09-15)
256
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Success
Rate of
PS
Outgoing
InterRAT
Handove
r
Initiated
by RNC
for Cell
Analysis
Number of Times
that the Timer
Waiting for Iu
Release Command
Expires in PS
Outgoing Inter-RAT
Handover Initiated
by RNC for Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of Failed PS
Outgoing Inter-RAT
Handovers Initiated
by RNC
(Configuration
unsupported)
none
InterRAT
Handover
Measuremen
t per cell
Number of Failed PS
Outgoing Inter-RAT
Handovers Initiated
by RNC (Physical
Channel Failure)
none
InterRAT
Handover
Measuremen
t per cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell
Issue 01 (2016-09-15)
257
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Success
Rate of
Preparati
ons for
CS
Incoming
InterRAT
Handove
rs for
Cell
Analysis
Number of Failed
Preparations for CS
Incoming Inter-RAT
Handover
(Relocation failure
in target CN/RNC or
target system)
none
InterRAT
Handover
Measuremen
t per cell
Number of Failed
Preparations for CS
Incoming Inter-RAT
Handover
(Relocation not
supported in target
RNC or target
system)
none
InterRAT
Handover
Measuremen
t per cell
Number of Failed
Preparations for CS
Incoming Inter-RAT
Handover (No
resource available)
none
InterRAT
Handover
Measuremen
t per cell
Number of Failed
Preparations for CS
Incoming Inter-RAT
Handover (Traffic
Load In The Target
Cell Higher Than In
The Source Cell)
none
InterRAT
Handover
Measuremen
t per cell
Number of CS
Incoming Inter-RAT
Handover
Preparation Failures
for Cell (Iu
RELEASE
COMMAND
Received)
none
InterRAT
Handover
Measuremen
t per cell
258
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Success
Rate of
CS
Incoming
InterRAT
Handove
rs for
Cell
Analysis
Number of Failed
CS Inter-RAT
Incoming Handovers
Due to No Response
from UE for Cell
none
InterRAT
Handover
Measuremen
t per cell
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
259
PRS
Performance Report Reference
Object Type
GCell Group
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
GSM
Interoper
ations
Report
CH350:Outgoing
Inter-RAT Inter-Cell
Handover Requests
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
CH351:Outgoing
Inter-RAT Inter-Cell
Handover
Commands
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
CH353:Successful
Outgoing Inter-RAT
Inter-Cell Handovers
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
260
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
GSM Voice
Outgoing Inter-RAT
Inter-Cell Handover
Preparation Success
Rate
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
[CH351:Outgoing Inter-RAT
Inter-Cell Handover
Commands]/
[CH350:Outgoing Inter-RAT
Inter-Cell Handover Requests]
GSM Voice
Outgoing Inter-RAT
Inter-Cell Handover
Success Rate
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
[CH353:Successful Outgoing
Inter-RAT Inter-Cell
Handovers]/[CH351:Outgoing
Inter-RAT Inter-Cell
Handover Commands]
CH360:Incoming
Inter-RAT Inter-Cell
Handover Requests
none
Incoming
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
CH361:Incoming
Inter-RAT Inter-Cell
Handover Responses
none
Incoming
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
CH363:Successful
Incoming Inter-RAT
Inter-Cell Handovers
none
Incoming
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
Success Rate of
Preparation for
Incoming Inter-RAT
Inter-Cell Handover
Incoming
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
[CH361:Incoming Inter-RAT
Inter-Cell Handover
Responses]/[CH360:Incoming
Inter-RAT Inter-Cell
Handover Requests]
Success Rate of
Preparation for
Incoming Inter-RAT
Inter-Cell Radio
Handover
Incoming
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
[CH363:Successful Incoming
Inter-RAT Inter-Cell
Handovers]/[CH361:Incoming
Inter-RAT Inter-Cell
Handover Responses]
261
PRS
Performance Report Reference
Object Type
UCell Group
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
UMTS
Interoper
ations
Report
Number of
Preparation
Attempts for CS
Outgoing Inter-RAT
Handover for Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful
Preparations for CS
Outgoing Inter-RAT
Handover for Cell
none
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.SuccR
elocPrepOutCS.Cell.
Rate
InterRAT
Handover
Measuremen
t per cell
[Number of Successful
Preparations for CS Outgoing
Inter-RAT Handover for Cell]/
[Number of Preparation
Attempts for CS Outgoing
Inter-RAT Handover for
Cell]*{100.00}
Number of CS
Outgoing Inter-RAT
Handover Attempts
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful CS
Outgoing Inter-RAT
Handovers for Cell
none
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[Number of Successful CS
Outgoing Inter-RAT
Handovers for Cell]/[Number
of CS Outgoing Inter-RAT
Handover
Attempts]*{100.00}
262
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of PS
Outgoing Inter-RAT
Handover Attempts
Initiated by RNC for
Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful PS
Outgoing Inter-RAT
Handovers Initiated
by RNC for Cell
none
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.SuccO
utPSUNTRAN.Cell.
Rate
InterRAT
Handover
Measuremen
t per cell
[Number of Successful PS
Outgoing Inter-RAT
Handovers Initiated by RNC
for Cell]/[Number of PS
Outgoing Inter-RAT Handover
Attempts Initiated by RNC for
Cell]*{100.00}
Number of
Preparations for CS
Incoming Inter-RAT
Handover for Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful
preparations for CS
Incoming Inter-RAT
Handovers for Cell
none
InterRAT
Handover
Measuremen
t per cell
Success Rate of
preparations for CS
Incoming Inter-RAT
Handovers for Cell
InterRAT
Handover
Measuremen
t per cell
[Number of Successful
preparations for CS Incoming
Inter-RAT Handovers for
Cell]/[Number of Preparations
for CS Incoming Inter-RAT
Handover for Cell]*{100}
Number of CS
Incoming Inter-RAT
Handover Attempts
for Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful CS
Incoming Inter-RAT
Handovers for Cell
none
InterRAT
Handover
Measuremen
t per cell
263
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Success Rate of CS
Incoming Inter-RAT
Handovers for Cell
InterRAT
Handover
Measuremen
t per cell
[Number of Successful CS
Incoming Inter-RAT
Handovers for Cell]/[Number
of CS Incoming Inter-RAT
Handover Attempts for
Cell]*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Object Type
GCell Group
Issue 01 (2016-09-15)
264
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
GSM
CoRRM
Report
H350M:Outgoing
Inter-RAT Inter-Cell
Handover
Requests(service
based handover)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H351M:Outgoing
Inter-RAT Inter-Cell
Handover
Commands(service
based handover)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352M:Failed
Outgoing Inter-RAT
Inter-Cell
Handovers(service
based handover)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H350G:Outgoing
Inter-RAT Inter-Cell
Handover
Requests(load based
handover)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H351G:Outgoing
Inter-RAT Inter-Cell
Handover
Commands(load
based handover)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
H352N:Number of
Failed Outgoing
Inter-RAT Inter-Cell
Handovers (Target
Cell Traffic Load
Higher)
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
265
PRS
Performance Report Reference
Object Type
UCell Group
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
UMTS
CoRRM
Report
Number of
Successful CS
Outgoing Inter-RAT
Handovers Based on
Load for Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Preparation
Attempts for CS
Outgoing Inter-RAT
Handover Initiated
by UTRAN Based
on Load for Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful
Preparations for CS
Outgoing Inter-RAT
Handover Initiated
by UTRAN Based
on Load for Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Preparation
Attempts for CS
Outgoing Inter-RAT
Handover Based on
RF (Coverage, QoS,
or HCS) for Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful
Preparations for CS
Outgoing Inter-RAT
Handover Based on
RF (Coverage, QoS,
or HCS) for Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful CS
Outgoing Inter-RAT
Handovers Based on
Service Type for
Cell
none
InterRAT
Handover
Measuremen
t per cell
266
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of
Preparation
Attempts for CS
Outgoing Inter-RAT
Handover Based on
Service Type for
Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful
Preparations for CS
Outgoing Inter-RAT
Handover Based on
Service Type for
Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful CS
Outgoing Inter-RAT
Handovers Based on
Directed Retry for
Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Preparation
Attempts for CS
Outgoing Inter-RAT
Handover Based on
Directed Retry for
Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful
Preparations for CS
Outgoing Inter-RAT
Handover Based on
Directed Retry for
Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of PS
Outgoing Inter-RAT
Handover Attempts
Initiated by UTRAN
Based on Load for
Cell
none
InterRAT
Handover
Measuremen
t per cell
267
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of
Successful PS
Outgoing Inter-RAT
Handovers Initiated
by UTRAN Based
on Load for Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of PS
Outgoing Inter-RAT
Handover Attempts
Initiated by the RNC
Based on Service
Type for Cell
none
InterRAT
Handover
Measuremen
t per cell
Number of
Successful PS
Outgoing Inter-RAT
Handovers Initiated
by the RNC Based
on Service Type for
Cell
none
InterRAT
Handover
Measuremen
t per cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Issue 01 (2016-09-15)
268
PRS
Performance Report Reference
Object Type
GCell Group
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
GSM
Power
Sharing
Report
GU1000:Number of
Times That GSM
Shares Power with
UMTS
none
GU Power
Sharing
Measuremen
t for TRX
GU1001:Number of
Times That GSM
Takes Power Back
from UMTS
none
GU Power
Sharing
Measuremen
t for TRX
GU1002:Total
Duration That GSM
Shares Power with
UMTS
GU Power
Sharing
Measuremen
t for TRX
GU1003:Total
Power That GSM
Shares with UMTS
none
GU Power
Sharing
Measuremen
t for TRX
GU1004:Average
Power that GSM
Shares with UMTS
milli
watt
GU Power
Sharing
Measuremen
t for TRX
GU1005:Number of
GU Power Sharing
Periods
none
GU Power
Sharing
Measuremen
t for TRX
GU1006:Total
Remaining
Shareable Power of
a GSM TRX
milli
watt
GU Power
Sharing
Measuremen
t for TRX
269
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
GU1007:Average
Remaining
Shareable Power of
a GSM TRX
milli
watt
GU Power
Sharing
Measuremen
t for TRX
GU1008:Number of
Times of Power
Insufficiency After
GSM Shares Power
with UMTS
none
GU Power
Sharing
Measuremen
t for TRX
GU1009:Number of
Timeslots that GSM
Shares Power with
UMTS
none
GU Power
Sharing
Measuremen
t for TRX
GU1010:GSM
Power Insufficiency
Rate After GSM
Shares Power with
UMTS
none
GU Power
Sharing
Measuremen
t for TRX
Object Type
UCell Group
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
UMTS
Power
Sharing
Report(R
NC
counter)
Mean Non-HSDPA
Transmitted Carrier
Power for Cell
dBm
Cell TX and
RX Power
Measuremen
t per cell
dBm
Cell TX and
RX Power
Measuremen
t per cell
270
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
dBm
Cell TX and
RX Power
Measuremen
t per cell
Object Type
UCell Group
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
UMTS
Power
sharing
Report(N
odeB
counter)
VS.DataOutput.User
Data
bit/s
HSDPA
Measuremen
ts per Local
Cell
VS.PdschPwrRatio.
Mean
per
mill
HSDPA
Measuremen
ts per Local
Cell
VS.PdschPwrRatio.
Max
per
mill
HSDPA
Measuremen
ts per Local
Cell
VS.PdschPwrRatio.
Min
per
mill
HSDPA
Measuremen
ts per Local
Cell
271
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
272
PRS
Performance Report Reference
Issue 01 (2016-09-15)
273
PRS
Performance Report Reference
NE Type
BWA
Object Type
BWA
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BS
performa
nce test
times
BS
performance
test
times
BS
performance
test
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Issue 01 (2016-09-15)
274
PRS
Performance Report Reference
NE Type
BWA
Object Type
BWA Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
idle
mode
performa
nce test
times
idle mode
performance
test
Times of Successful
MS-Initiated Entry
to Idle Mode
times
idle mode
performance
test
times
idle mode
performance
test
Times of Successful
BS-Initiated Entry to
Idle Mode
times
idle mode
performance
test
times
idle mode
performance
test
BS receive paging
response times
times
idle mode
performance
test
Times of Normal
Location Update
times
idle mode
performance
test
Times of Location
Update in Power-off
Mode
times
idle mode
performance
test
275
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Times of Successful
Location Update
times
idle mode
performance
test
Times of Network
Re-Entry from Idle
Mode
times
idle mode
performance
test
Times of Successful
Network Re-Entry
from Idle Mode
times
idle mode
performance
test
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BWA
Object Type
BWA Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
link
quality
performa
nce test
Number of DL
Unicast SDUs on
Carrier
numb
er
link quality
performance
test
276
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
DL Unicast Traffic
on Carrier
byte
link quality
performance
test
Number of UL
Unicast PDUs on
Carrier
numb
er
link quality
performance
test
UL Unicast Traffic
on Carrier
byte
link quality
performance
test
Total UL Bandwidth
Allocated
byte
link quality
performance
test
Number of DL
Discarded PDUs on
Carrier
numb
er
link quality
performance
test
Number of UL
Discarded Packets
on Carrier
numb
er
link quality
performance
test
Number of
Retransmitted Bytes
Required by BS
(ARQ Enabled)
byte
link quality
performance
test
Number of
Retransmitted Bytes
Required by MS
(ARQ Enabled)
byte
link quality
performance
test
Number of DL
Broadcast Packets
numb
er
link quality
performance
test
DL Broadcast
Traffic
byte
link quality
performance
test
Total Number of
HARQ
Retransmission
Times
times
link quality
performance
test
Total Number of
HARQ Transmission
Times
times
link quality
performance
test
277
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BWA
Object Type
BWA Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
handover
performa
nce test
times
handover
performance
test
Times of Successful
Handover Responses
from BS
times
handover
performance
test
Times of Handover
Execution Triggered
by MS
times
handover
performance
test
times
handover
performance
test
Times of Handover
Cancellation
Initiated by MS
times
handover
performance
test
Number of Incoming
Handover Requests
times
handover
performance
test
278
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Times of
Successfully
Responding to
Incoming Handover
times
handover
performance
test
Times of Ready
Incoming Handover
Execution
times
handover
performance
test
Number of Ready
Incoming Handover
Ranging Requests
times
handover
performance
test
Number of Unready
Incoming Handover
Ranging Requests
times
handover
performance
test
Times of
Successfully
Responding to
Incoming Handover
Ranging
times
handover
performance
test
Times of
Completing
Incoming Handover
times
handover
performance
test
Number of Incoming
Handover Context
Requests
times
handover
performance
test
Number of
Successful Context
Requests for
Incoming Handover
times
handover
performance
test
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
279
PRS
Performance Report Reference
NE Type
BWA
Object Type
BWA Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
network
entry
performa
nce test
Times of Receiving
Initial Ranging
CDMA Code by BS
times
network
entry
performance
test
Times of Receiving
Periodic Ranging
CDMA Code by BS
times
network
entry
performance
test
Times of Receiving
Handover Ranging
CDMA Code by BS
times
network
entry
performance
test
Times of
Responding to
Ranging CDMA
Code with Success
times
network
entry
performance
test
Times of
Responding to
Ranging CDMA
Code with Continue
times
network
entry
performance
test
times
network
entry
performance
test
Number of Initial
Network Entry
Requests
times
network
entry
performance
test
280
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Successful Initial
Ranging Times
times
network
entry
performance
test
Number of Basic
Capability
Negotiation
Requests
times
network
entry
performance
test
Times of Successful
Basic Capability
Negotiation by GW
times
network
entry
performance
test
Times of Successful
Basic Capability
Negotiation
times
network
entry
performance
test
Number of
Registration
Requests from MS
times
network
entry
performance
test
Times of Successful
Registration by GW
times
network
entry
performance
test
Times of Successful
Registration for
Initial Network
Entry
times
network
entry
performance
test
Number of Service
Flow Establishment
Requests
times
network
entry
performance
test
Times of Successful
Service Flow
Establishment
times
network
entry
performance
test
times
network
entry
performance
test
281
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Times of MS
Authorization in
Initial Network
Entry
times
network
entry
performance
test
Times of Successful
MS Authorization in
Initial Network
Entry
times
network
entry
performance
test
times
network
entry
performance
test
Times of Successful
MS-Initiated ReAuthorization
times
network
entry
performance
test
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BWA
Object Type
BWA Carrier
Issue 01 (2016-09-15)
282
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
network
detach
performa
nce test
Times of
Deregistration due to
Air Link Failure
times
network
detach
performance
test
Times of
Deregistration
Initiated by MS
times
network
detach
performance
test
Times of
Deregistration
Initiated by GW
times
network
detach
performance
test
Times of
Deregistration due to
OM
times
network
detach
performance
test
Times of
Deregistration due to
Handover Failure
times
network
detach
performance
test
Times of
Deregistration due to
Other Causes
times
network
detach
performance
test
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Issue 01 (2016-09-15)
283
PRS
Performance Report Reference
NE Type
BWA
Object Type
BWA Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
throughp
ut
performa
nce test
uplink UGS
throughput
byte
throughput
performance
test
uplink ERTPS
throughput
byte
throughput
performance
test
uplink RTPS
throughput
byte
throughput
performance
test
uplink NRTPS
throughput
byte
throughput
performance
test
uplink BE
throughput
byte
throughput
performance
test
downlink UGS
throughput
byte
throughput
performance
test
downlink ERTPS
throughput
byte
throughput
performance
test
downlink RTPS
throughput
byte
throughput
performance
test
downlink NRTPS
throughput
byte
throughput
performance
test
downlink BE
throughput
byte
throughput
performance
test
284
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BWA
Object Type
BWA Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
carrier
load
performa
nce test
Maximum Number
of Online Users
numb
er
carrier load
performance
test
Minimum Number
of Online Users
numb
er
carrier load
performance
test
Number of Slots
Occupied by UL
Common Channel
numb
er
carrier load
performance
test
Number of Slots
Occupied by DL
Broadcast Channel
numb
er
carrier load
performance
test
Number of Slots
Occupied by UL
Basic Channel
numb
er
carrier load
performance
test
Number of Slots
Occupied by DL
Basic Channel
numb
er
carrier load
performance
test
285
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Slots
Occupied by UL
Primary Channel
numb
er
carrier load
performance
test
Number of Slots
Occupied by DL
Primary Channel
numb
er
carrier load
performance
test
Number of Slots
Occupied by DL
Traffic Channel
numb
er
carrier load
performance
test
Number of Slots
Occupied by UL
Traffic Channel
numb
er
carrier load
performance
test
Total Length of UL
SDUs on MAC
Layer
byte
carrier load
performance
test
Total Length of UL
PDUs on MAC
Layer
byte
carrier load
performance
test
Total Length of DL
SDUs on MAC
Layer
byte
carrier load
performance
test
Total Length of DL
PDUs on MAC
Layer
byte
carrier load
performance
test
Number of DL Slots
Occupied on Carrier
numb
er
carrier load
performance
test
Number of UL Slots
Occupied on Carrier
numb
er
carrier load
performance
test
Total Number of
Slots Occupied on
UL Partial Zone
numb
er
carrier load
performance
test
Total Number of
Slots Occupied on
DL Partial Zone
numb
er
carrier load
performance
test
Total Number of
Slots Occupied on
UL All Zone
numb
er
carrier load
performance
test
286
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Total Number of
Slots Occupied on
DL All Zone
numb
er
carrier load
performance
test
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
287
PRS
Performance Report Reference
Issue 01 (2016-09-15)
288
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Overvie
w of
BSC
Performa
nce
CS Call Setup
Success Ratio
CS Call
Setup
Performance
Stat
([Successful CS Call
Setups[Times]]/[CS
Attempts[Times]])*{100}
PS Call Setup
Success Ratio
PS Call
Setup
Performance
Stat
([Successful PS Call
Setups[Times]]/[PS
Attempts[Times]])*{100}
CS Call
Drop
Performance
Stat
289
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
PS Call Drop
Performance
Stat
TCH Congestion
Ratio
TCH
Congestion
Performance
Stat
(([TCH Assignment
Requests[Times]]-[Successful
TCH Assignments[Times]])/
[TCH Assignment
Requests[Times]])*{100}
IntraBS Soft HO
Success Ratio
Intra-BSC
Soft HO
Performance
Stat
InterBS Soft HO
Success Ratio
Inter-BSC
Soft HO
Performance
Stat
BSC Traffic
Performance
Stat(FCH)
290
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Density of Traffic
Carried on TCH
(Excluding HO)
(CS-FCH)[Erl]
Erl
BSC Traffic
Performance
Stat(FCH)
Density of Traffic
Carried on TCH
(Excluding HO)
(PS-FCH)[Erl]
Erl
BSC Traffic
Performance
Stat(FCH)
Erl
BSC Traffic
Performance
Stat(Forward
SCH)
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Issue 01 (2016-09-15)
291
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-BS
Soft HO
Failure
Analyse
Failure Times
times
Inter-BSC
Soft HO
Performance
Stat
Inter-BS Soft HO
Failures (Radio
resources
unavailable)[Times]
times
Inter-BSC
Soft HO
Performance
Stat
Inter-BS Soft HO
Failures (Requested
Abis resources
unavailable)[Times]
times
Inter-BSC
Soft HO
Performance
Stat
Inter-BS Soft HO
Failures (Radio
interface abnormal)
[Times]
times
Inter-BSC
Soft HO
Performance
Stat
Inter-BS Soft HO
Failures (MS
rejected)[Times]
times
Inter-BSC
Soft HO
Performance
Stat
Inter-BS Soft HO
Failures (A3 link
setup failed)[Times]
times
Inter-BSC
Soft HO
Performance
Stat
Inter-BS Soft HO
Failures (Other
causes)[Times]
times
Inter-BSC
Soft HO
Performance
Stat
InterBS Soft HO
Success Ratio
Inter-BSC
Soft HO
Performance
Stat
292
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS
Soft HO
Failure
Analyse
Failure Times
times
Intra-BSC
Soft HO
Performance
Stat
Intra-BS Soft HO
Failures (Radio
resources
unavailable)[Times]
times
Intra-BSC
Soft HO
Performance
Stat
293
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS Soft HO
Failures (Requested
Abis resources
unavailable)[Times]
times
Intra-BSC
Soft HO
Performance
Stat
Intra-BS Soft HO
Failures (Radio
interface abnormal)
[Times]
times
Intra-BSC
Soft HO
Performance
Stat
Intra-BS Soft HO
Failures (MS
rejected)[Times]
times
Intra-BSC
Soft HO
Performance
Stat
Intra-BS Soft HO
Failures (Other
causes)[Times]
times
Intra-BSC
Soft HO
Performance
Stat
IntraBS Soft HO
Success Ratio
Intra-BSC
Soft HO
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Issue 01 (2016-09-15)
294
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS Call
Drop
Reason
Analyse
times
CS Call
Drop
Performance
Stat
times
CS Call
Drop
Performance
Stat
times
CS Call
Drop
Performance
Stat
times
CS Call
Drop
Performance
Stat
times
CS Call
Drop
Performance
Stat
CS Call Drops
(Other causes)
[Times]
times
CS Call
Drop
Performance
Stat
times
CS Call
Drop
Performance
Stat
CS IS-2000 Call
Drops (HHO fail)
[Times]
times
CS Call
Drop
Performance
Stat
295
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS Call
Drop
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Issue 01 (2016-09-15)
296
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS Call
Setup
Failure
Reason
Analyse
CS Attempts[Times]
times
CS Call
Setup
Performance
Stat
CS Call Setup
Failure Times
times
CS Call
Setup
Performance
Stat
[CS A1 Interface
Failures[Times]]+[CS Call
Resource Allocation
Failures[Times]]+[CS Reverse
TCH Preamble Acquisition
Failures[Times]]+[CS Radio
Link Setup Failures[Times]]+
[CS Service Connect
Failures[Times]]
CS A1 Interface
Failures[Times]
times
CS Call
Setup
Performance
Stat
CS Call Resource
Allocation
Failures[Times]
times
CS Call
Setup
Performance
Stat
CS Reverse TCH
Preamble
Acquisition
Failures[Times]
times
CS Call
Setup
Performance
Stat
CS Radio Link
Setup
Failures[Times]
times
CS Call
Setup
Performance
Stat
CS Service Connect
Failures[Times]
times
CS Call
Setup
Performance
Stat
CS Call Setup
Success Ratio
CS Call
Setup
Performance
Stat
([Successful CS Call
Setups[Times]]/[CS
Attempts[Times]])*{100}
297
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS Call
Drop
Reason
Analyse
times
PS Call Drop
Performance
Stat
times
PS Call Drop
Performance
Stat
times
PS Call Drop
Performance
Stat
298
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
times
PS Call Drop
Performance
Stat
times
PS Call Drop
Performance
Stat
times
PS Call Drop
Performance
Stat
PS Call Drops
(Other causes)
[Times]
times
PS Call Drop
Performance
Stat
times
PS Call Drop
Performance
Stat
PS Call Drop
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
299
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS Call
Setup
Failure
Reason
Analyse
PS Attempts[Times]
times
PS Call
Setup
Performance
Stat
PS Call Setup
Failure Times
times
PS Call
Setup
Performance
Stat
[PS A1 Interface
Failures[Times]]+[PS Call
Resource Allocation
Failures[Times]]+[PS Reverse
TCH Preamble Acquisition
Failures[Times]]+[PS Radio
Link Setup Failures[Times]]+
[PS Service Connect
Failures[Times]]
PS A1 Interface
Failures[Times]
times
PS Call
Setup
Performance
Stat
PS Call Resource
Allocation
Failures[Times]
times
PS Call
Setup
Performance
Stat
PS Reverse TCH
Preamble
Acquisition
Failures[Times]
times
PS Call
Setup
Performance
Stat
times
PS Call
Setup
Performance
Stat
300
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS Service Connect
Failures[Times]
times
PS Call
Setup
Performance
Stat
PS Call Setup
Success Ratio
PS Call
Setup
Performance
Stat
([Successful PS Call
Setups[Times]]/[PS
Attempts[Times]])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SPU
Load
Report
Density of Traffic
Carried on TCH
(Excluding HO)
(CS-FCH)[Erl]
Erl
BSC Traffic
Performance
Stat(FCH)
301
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Density of Traffic
Carried on TCH
(Excluding HO)
(PS-FCH)[Erl]
Erl
BSC Traffic
Performance
Stat(FCH)
Erl
BSC Traffic
Performance
Stat(Forward
SCH)
Erl
BSC Traffic
Performance
Stat(FCH)
Erl
BSC Traffic
Performance
Stat(FCH)
WALSH Traffic
Density-FCH[Erl]
Erl
BSC Traffic
Performance
Stat(FCH)
Total Traffic
Erl
BSC Traffic
Performance
Stat(FCH)
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Issue 01 (2016-09-15)
302
PRS
Performance Report Reference
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Congesti
on
Reason
Analyse
TCH Congestion
Times
times
TCH
Congestion
Performance
Stat
TCH Assignment
Failures (WALSH
shortage)[Times]
times
TCH
Congestion
Performance
Stat
TCH Assignment
Failures (Low
forward power)
[Times]
times
TCH
Congestion
Performance
Stat
TCH Assignment
Failures (Low
reverse power)
[Times]
times
TCH
Congestion
Performance
Stat
TCH Assignment
Failures (Channel
shortage)[Times]
times
TCH
Congestion
Performance
Stat
TCH Assignment
Failures (Other
causes)[Times]
times
TCH
Congestion
Performance
Stat
TCH Congestion
Ratio
TCH
Congestion
Performance
Stat
(([TCH Assignment
Requests[Times]]-[Successful
TCH Assignments[Times]])/
[TCH Assignment
Requests[Times]])*{100}
303
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSCVG3Pilot
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PCH
Channel
Usage
Ratio
TOPN
Report
none
PCH Using
Ratio
Performance
Stat
none
PCH Using
Ratio
Performance
Stat
PCH Overhead
Message Using
Ratio[%]
none
PCH Using
Ratio
Performance
Stat
none
PCH Using
Ratio
Performance
Stat
304
PRS
Performance Report Reference
Subrep
ort
Name
ACH
Channel
Usage
Ratio
TOPN
Report
Counter
Coun
ter
Unit
Function
Subset
Formula
PCH Non-call
Message Using
Ratio[%]
none
PCH Using
Ratio
Performance
Stat
none
ACH
Performance
Stat
none
ACH
Performance
Stat
none
ACH
Performance
Stat
ACH Average
Collision Ratio[%]
none
ACH
Performance
Stat
none
ACH
Performance
Stat
none
ACH
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Issue 01 (2016-09-15)
305
PRS
Performance Report Reference
Object Type
CBSC Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-BS
Soft HO
Failure
TopN
Failure Times
times
Performance
Stat of
Carrier InterBSC Soft
HO
InterBS Soft HO
Success Ratio
Performance
Stat of
Carrier InterBSC Soft
HO
Inter-BS Soft HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of
Carrier InterBSC Soft
HO
Inter-BS Soft HO
Failures (Requested
Abis resources
unavailable)[Times]
times
Performance
Stat of
Carrier InterBSC Soft
HO
Inter-BS Soft HO
Failures (Radio
interface abnormal)
[Times]
times
Performance
Stat of
Carrier InterBSC Soft
HO
Inter-BS Soft HO
Failures (MS
rejected)[Times]
times
Performance
Stat of
Carrier InterBSC Soft
HO
306
PRS
Performance Report Reference
Subrep
ort
Name
Inter-BS
Soft HO
Success
Ratio(%)
TopN
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-BS Soft HO
Failures (A3 link
setup failed)[Times]
times
Performance
Stat of
Carrier InterBSC Soft
HO
Inter-BS Soft HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier InterBSC Soft
HO
Failure Times
times
Performance
Stat of
Carrier InterBSC Soft
HO
InterBS Soft HO
Success Ratio
Performance
Stat of
Carrier InterBSC Soft
HO
Inter-BS Soft HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of
Carrier InterBSC Soft
HO
Inter-BS Soft HO
Failures (Requested
Abis resources
unavailable)[Times]
times
Performance
Stat of
Carrier InterBSC Soft
HO
Inter-BS Soft HO
Failures (Radio
interface abnormal)
[Times]
times
Performance
Stat of
Carrier InterBSC Soft
HO
307
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-BS Soft HO
Failures (MS
rejected)[Times]
times
Performance
Stat of
Carrier InterBSC Soft
HO
Inter-BS Soft HO
Failures (A3 link
setup failed)[Times]
times
Performance
Stat of
Carrier InterBSC Soft
HO
Inter-BS Soft HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier InterBSC Soft
HO
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 01 (2016-09-15)
308
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS
Soft HO
Failure
TopN
Failure Times
times
Performance
Stat of
Carrier Soft
HO
IntraBS Soft HO
Success Ratio
Performance
Stat of
Carrier Soft
HO
Intra-BS Soft HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of
Carrier Soft
HO
Intra-BS Soft HO
Failures (Requested
Abis resources
unavailable)[Times]
times
Performance
Stat of
Carrier Soft
HO
Intra-BS Soft HO
Failures (Radio
interface abnormal)
[Times]
times
Performance
Stat of
Carrier Soft
HO
Intra-BS Soft HO
Failures (MS
rejected)[Times]
times
Performance
Stat of
Carrier Soft
HO
Intra-BS Soft HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier Soft
HO
309
PRS
Performance Report Reference
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS
Soft HO
Success
Ratio(%)
TopN
Failure Times
times
Performance
Stat of
Carrier Soft
HO
IntraBS Soft HO
Success Ratio
Performance
Stat of
Carrier Soft
HO
Intra-BS Soft HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of
Carrier Soft
HO
Intra-BS Soft HO
Failures (Requested
Abis resources
unavailable)[Times]
times
Performance
Stat of
Carrier Soft
HO
Intra-BS Soft HO
Failures (Radio
interface abnormal)
[Times]
times
Performance
Stat of
Carrier Soft
HO
Intra-BS Soft HO
Failures (MS
rejected)[Times]
times
Performance
Stat of
Carrier Soft
HO
Intra-BS Soft HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier Soft
HO
310
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS Call
Drop
Times
TopN
CS Call
Drops(Times)
times
Performance
Stat of
Carrier CS
Call Drop
Performance
Stat of
Carrier CS
Call Drop
311
PRS
Performance Report Reference
Subrep
ort
Name
CS Call
Drop
Ratio(%)
TopN
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
times
Performance
Stat of
Carrier CS
Call Drop
times
Performance
Stat of
Carrier CS
Call Drop
times
Performance
Stat of
Carrier CS
Call Drop
times
Performance
Stat of
Carrier CS
Call Drop
CS Call Drops
(Other causes)
[Times]
times
Performance
Stat of
Carrier CS
Call Drop
times
Performance
Stat of
Carrier CS
Call Drop
CS IS-2000 Call
Drops (HHO fail)
[Times]
times
Performance
Stat of
Carrier CS
Call Drop
CS Call
Drops(Times)
times
Performance
Stat of
Carrier CS
Call Drop
312
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Performance
Stat of
Carrier CS
Call Drop
times
Performance
Stat of
Carrier CS
Call Drop
times
Performance
Stat of
Carrier CS
Call Drop
times
Performance
Stat of
Carrier CS
Call Drop
times
Performance
Stat of
Carrier CS
Call Drop
CS Call Drops
(Other causes)
[Times]
times
Performance
Stat of
Carrier CS
Call Drop
times
Performance
Stat of
Carrier CS
Call Drop
CS IS-2000 Call
Drops (HHO fail)
[Times]
times
Performance
Stat of
Carrier CS
Call Drop
313
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS Call
Setup
Failure
Times
TopN
CS Attempts[Times]
times
Performance
Stat of
Carrier CS
Call Setup
CS Call Setup
Failures(Times)
times
Performance
Stat of
Carrier CS
Call Setup
[CS A1 Interface
Failures[Times]]+[CS Call
Resource Allocation
Failures[Times]]+[CS Reverse
TCH Preamble Acquisition
Failures[Times]]+[IS-95 CS
Radio Link Setup
Failures[Times]]+[IS-95 CS
Service Connect
Failures[Times]]
CS A1 Interface
Failures[Times]
times
Performance
Stat of
Carrier CS
Call Setup
314
PRS
Performance Report Reference
Subrep
ort
Name
CS Call
Setup
Success
Ratio(%)
TopN
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
CS Call Resource
Allocation
Failures[Times]
times
Performance
Stat of
Carrier CS
Call Setup
CS Reverse TCH
Preamble
Acquisition
Failures[Times]
times
Performance
Stat of
Carrier CS
Call Setup
CS Radio Link
Setup
Failures[Times]
times
Performance
Stat of
Carrier CS
Call Setup
CS Service Connect
Failures[Times]
times
Performance
Stat of
Carrier CS
Call Setup
CS Call Setup
Success Ratio
Performance
Stat of
Carrier CS
Call Setup
[Successful CS Call
Setups[Times]]/[CS
Attempts[Times]]*{100}
CS Attempts[Times]
times
Performance
Stat of
Carrier CS
Call Setup
CS Call Setup
Failures(Times)
times
Performance
Stat of
Carrier CS
Call Setup
[CS A1 Interface
Failures[Times]]+[CS Call
Resource Allocation
Failures[Times]]+[CS Reverse
TCH Preamble Acquisition
Failures[Times]]+[IS-95 CS
Radio Link Setup
Failures[Times]]+[IS-95 CS
Service Connect
Failures[Times]]
CS A1 Interface
Failures[Times]
times
Performance
Stat of
Carrier CS
Call Setup
CS Call Resource
Allocation
Failures[Times]
times
Performance
Stat of
Carrier CS
Call Setup
315
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS Reverse TCH
Preamble
Acquisition
Failures[Times]
times
Performance
Stat of
Carrier CS
Call Setup
CS Radio Link
Setup
Failures[Times]
times
Performance
Stat of
Carrier CS
Call Setup
CS Service Connect
Failures[Times]
times
Performance
Stat of
Carrier CS
Call Setup
CS Call Setup
Success Ratio
Performance
Stat of
Carrier CS
Call Setup
[Successful CS Call
Setups[Times]]/[CS
Attempts[Times]]*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 01 (2016-09-15)
316
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS Call
Drop
Times
TopN
PS Call
Drops(Times)
times
Performance
Stat of
Carrier PS
Call Drop
Performance
Stat of
Carrier CS
Call Drop
times
Performance
Stat of
Carrier PS
Call Drop
times
Performance
Stat of
Carrier PS
Call Drop
times
Performance
Stat of
Carrier PS
Call Drop
times
Performance
Stat of
Carrier PS
Call Drop
317
PRS
Performance Report Reference
Subrep
ort
Name
PS Call
Drop
Ratio(%)
TopN
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
times
Performance
Stat of
Carrier PS
Call Drop
PS Call Drops
(Other causes)
[Times]
times
Performance
Stat of
Carrier PS
Call Drop
times
Performance
Stat of
Carrier PS
Call Drop
PS Call
Drops(Times)
times
Performance
Stat of
Carrier PS
Call Drop
Performance
Stat of
Carrier CS
Call Drop
times
Performance
Stat of
Carrier PS
Call Drop
318
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
times
Performance
Stat of
Carrier PS
Call Drop
times
Performance
Stat of
Carrier PS
Call Drop
times
Performance
Stat of
Carrier PS
Call Drop
times
Performance
Stat of
Carrier PS
Call Drop
PS Call Drops
(Other causes)
[Times]
times
Performance
Stat of
Carrier PS
Call Drop
times
Performance
Stat of
Carrier PS
Call Drop
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Issue 01 (2016-09-15)
319
PRS
Performance Report Reference
Object Type
CBSC Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS Call
Setup
Failure
Times
TopN
PS Attempts[Times]
times
Performance
Stat of
Carrier PS
Call Setup
PS Call Setup
Failures(Times)
times
Performance
Stat of
Carrier PS
Call Setup
[PS A1 Interface
Failures[Times]]+[PS Call
Resource Allocation
Failures[Times]]+[PS Reverse
TCH Preamble Acquisition
Failures[Times]]+[PS Radio
Link Setup Failures[Times]]+
[PS TCH Signaling Exchange
Failures[Times]]
PS Call Setup
Success Ratio
Performance
Stat of
Carrier PS
Call Setup
[Successful PS Call
Setups[Times]]/[PS
Attempts[Times]]*{100}
PS A1 Interface
Failures[Times]
times
Performance
Stat of
Carrier PS
Call Setup
PS Call Resource
Allocation
Failures[Times]
times
Performance
Stat of
Carrier PS
Call Setup
PS Reverse TCH
Preamble
Acquisition
Failures[Times]
times
Performance
Stat of
Carrier PS
Call Setup
times
Performance
Stat of
Carrier PS
Call Setup
PS TCH Signaling
Exchange
Failures[Times]
times
Performance
Stat of
Carrier PS
Call Setup
320
PRS
Performance Report Reference
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS Call
Setup
Success
Ratio(%)
TopN
PS Attempts[Times]
times
Performance
Stat of
Carrier PS
Call Setup
PS Call Setup
Failures(Times)
times
Performance
Stat of
Carrier PS
Call Setup
[PS A1 Interface
Failures[Times]]+[PS Call
Resource Allocation
Failures[Times]]+[PS Reverse
TCH Preamble Acquisition
Failures[Times]]+[PS Radio
Link Setup Failures[Times]]+
[PS TCH Signaling Exchange
Failures[Times]]
PS Call Setup
Success Ratio
Performance
Stat of
Carrier PS
Call Setup
[Successful PS Call
Setups[Times]]/[PS
Attempts[Times]]*{100}
PS A1 Interface
Failures[Times]
times
Performance
Stat of
Carrier PS
Call Setup
PS Call Resource
Allocation
Failures[Times]
times
Performance
Stat of
Carrier PS
Call Setup
PS Reverse TCH
Preamble
Acquisition
Failures[Times]
times
Performance
Stat of
Carrier PS
Call Setup
times
Performance
Stat of
Carrier PS
Call Setup
PS TCH Signaling
Exchange
Failures[Times]
times
Performance
Stat of
Carrier PS
Call Setup
321
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSCVG3Pilot
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RSSI
Performa
nce
Report
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
Difference Between
Main And Diversity
RSSI Average Value
none
RSSI
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
322
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Highest
Traffic
Total Traffic
Erl
Carrier
Traffic
Performance
Stat(FCH)
Density of Traffic
Carried on TCH
(Excluding HO)
(CS-FCH)[Erl]
Erl
Carrier
Traffic
Performance
Stat(FCH)
Density of Traffic
Carried on TCH
(Excluding HO)
(PS-FCH)[Erl]
Erl
Carrier
Traffic
Performance
Stat(FCH)
Erl
Carrier
Traffic
Performance
Stat(Forward
SCH)
Erl
Carrier
Traffic
Performance
Stat(FCH)
Erl
Carrier
Traffic
Performance
Stat(FCH)
323
PRS
Performance Report Reference
Subrep
ort
Name
Lowest
Traffic
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
WALSH Traffic
Density-FCH[Erl]
Erl
Carrier
Traffic
Performance
Stat(FCH)
Total Traffic
Erl
Carrier
Traffic
Performance
Stat(FCH)
Density of Traffic
Carried on TCH
(Excluding HO)
(CS-FCH)[Erl]
Erl
Carrier
Traffic
Performance
Stat(FCH)
Density of Traffic
Carried on TCH
(Excluding HO)
(PS-FCH)[Erl]
Erl
Carrier
Traffic
Performance
Stat(FCH)
Erl
Carrier
Traffic
Performance
Stat(Forward
SCH)
Erl
Carrier
Traffic
Performance
Stat(FCH)
Erl
Carrier
Traffic
Performance
Stat(FCH)
WALSH Traffic
Density-FCH[Erl]
Erl
Carrier
Traffic
Performance
Stat(FCH)
324
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Congesti
on Times
TopN
TCH Congestion
Times
times
Performance
Stat of
Carrier TCH
Congestion
TCH Congestion
Ratio
Performance
Stat of
Carrier TCH
Congestion
(([TCH Assignment
Requests[Times]]-[Successful
TCH Assignments[Times]])/
[TCH Assignment
Requests[Times]])*{100}
TCH Assignment
Failures (WALSH
shortage)[Times]
times
Performance
Stat of
Carrier TCH
Congestion
325
PRS
Performance Report Reference
Subrep
ort
Name
TCH
Congesti
on
Ratio(%)
TopN
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH Assignment
Failures (Low
forward power)
[Times]
times
Performance
Stat of
Carrier TCH
Congestion
TCH Assignment
Failures (Low
reverse power)
[Times]
times
Performance
Stat of
Carrier TCH
Congestion
TCH Assignment
Failures (Channel
shortage)[Times]
times
Performance
Stat of
Carrier TCH
Congestion
TCH Assignment
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier TCH
Congestion
TCH Congestion
Times
times
Performance
Stat of
Carrier TCH
Congestion
TCH Congestion
Ratio
Performance
Stat of
Carrier TCH
Congestion
(([TCH Assignment
Requests[Times]]-[Successful
TCH Assignments[Times]])/
[TCH Assignment
Requests[Times]])*{100}
TCH Assignment
Failures (WALSH
shortage)[Times]
times
Performance
Stat of
Carrier TCH
Congestion
TCH Assignment
Failures (Low
forward power)
[Times]
times
Performance
Stat of
Carrier TCH
Congestion
TCH Assignment
Failures (Low
reverse power)
[Times]
times
Performance
Stat of
Carrier TCH
Congestion
326
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH Assignment
Failures (Channel
shortage)[Times]
times
Performance
Stat of
Carrier TCH
Congestion
TCH Assignment
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier TCH
Congestion
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Average
Transmit
Power of
Carrier
TOPN
Report
Average Transmit
Power of
Carrier[dBm]
dBm
Performance
Stat of Link
Information
Measuremen
t
327
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
dBm
Performance
Stat of Link
Information
Measuremen
t
dBm
Performance
Stat of Link
Information
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Issue 01 (2016-09-15)
328
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD
Session
KPI
HRPD Session
Setup Success
Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
Access
Authentication
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
HRPD Session
Setup Average
Time[Millisecond]
ms
Performance
Stat of BSC
HRPD
Sessions
Maximum HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Maximum number
of active HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Average Duration of
HRPD Session
Setup (DO B)
[Millisecond]
ms
Performance
Stat of BSC
HRPD
Sessions
Maximum Number
of Active HRPD
Sessions (DO B)
[Entries]
entrie
s
Performance
Stat of BSC
HRPD
Sessions
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
329
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Session
Number
and
Active
Ratio
Maximum HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Minimum HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Maximum number
of active HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Minimum number of
active HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Maximum Number
of Active HRPD
Sessions (DO B)
[Entries]
entrie
s
Performance
Stat of BSC
HRPD
Sessions
Subscribe Active
Ratio[%]
none
Performance
Stat of BSC
HRPD
Sessions
330
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BSC
Session
Setup
Success
Ratio
times
Performance
Stat of BSC
HRPD
Sessions
HRPD Session
Setup Success
Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
HRPD Session
Setup Average
Time[Millisecond]
ms
Performance
Stat of BSC
HRPD
Sessions
Average Duration of
HRPD Session
Setup (DO B)
[Millisecond]
ms
Performance
Stat of BSC
HRPD
Sessions
331
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD
Session
Setup
Failure
HRPD Session
attemp Failures(No
HardwareID Request
Sent) Ratio
none
Performance
Stat of BSC
HRPD
Sessions
HRPD Session
attemp Failures(No
HardwareID
Response Received)
Ratio
none
Performance
Stat of BSC
HRPD
Sessions
HRPD Session
attemp Failures(No
UATIAssignment
Sent) Ratio
none
Performance
Stat of BSC
HRPD
Sessions
HRPD Session
attemp Failures(No
UATIComplete
Received) Ratio
none
Performance
Stat of BSC
HRPD
Sessions
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 01 (2016-09-15)
332
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD
Setup
SuccR
BottomN
HRPD Session
Setup Success
Ratio[%]
Performance
Stat of
Carrier
HRPD
Sessions
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures(No
HardwareID Request
Sent)[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures(No
HardwareID
Response Received)
[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures(No
UATIAssignment
Sent)[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures(No
UATIComplete
Received)[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp
Failures[Times]
none
Performance
Stat of
Carrier
HRPD
Sessions
Session
Setup
Fail
Times
TOPN
Issue 01 (2016-09-15)
333
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Setup Success
Ratio[%]
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures(No
HardwareID Request
Sent)[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures(No
HardwareID
Response Received)
[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures(No
UATIAssignment
Sent)[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures(No
UATIComplete
Received)[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Issue 01 (2016-09-15)
334
PRS
Performance Report Reference
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Session
Released
from AT
and AN
Mean HRPD
Session
Released[Times/
hour]
none
Performance
Stat of BSC
HRPD
Sessions
335
PRS
Performance Report Reference
Subrep
ort
Name
Causes
of HRPD
Session
Release
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Mean HRPD
Session from
AT[Times/hour]
none
Performance
Stat of BSC
HRPD
Sessions
Mean HRPD
Session Released
from AN[Times/
hour]
none
Performance
Stat of BSC
HRPD
Sessions
HRPD Session
Released from AT
none
Performance
Stat of BSC
HRPD
Sessions
336
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AN
none
Performance
Stat of BSC
HRPD
Sessions
337
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AT(Normal closed)
[%]
none
Performance
Stat of BSC
HRPD
Sessions
338
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AT(Protocol error)
[%]
none
Performance
Stat of BSC
HRPD
Sessions
339
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AT(Protocol
configuration
failure)[%]
none
Performance
Stat of BSC
HRPD
Sessions
340
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AT(Protocol
negotiation error)
[%]
none
Performance
Stat of BSC
HRPD
Sessions
341
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AT(Session
configuration
failure) [%]
none
Performance
Stat of BSC
HRPD
Sessions
342
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AT(Others) Ratio[%]
none
Performance
Stat of BSC
HRPD
Sessions
343
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AN(Configure
failed) [%]
none
Performance
Stat of BSC
HRPD
Sessions
344
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AN(Keep alive timer
expired) [%]
none
Performance
Stat of BSC
HRPD
Sessions
345
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AN(MML operated)
[%]
none
Performance
Stat of BSC
HRPD
Sessions
346
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AN(Authority
failed) [%]
none
Performance
Stat of BSC
HRPD
Sessions
347
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AN(Source AN
release in inter AN
handoff) [%]
none
Performance
Stat of BSC
HRPD
Sessions
348
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AN(Release old
session in session
setup) [%]
none
Performance
Stat of BSC
HRPD
Sessions
349
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AN(Others) [%]
none
Performance
Stat of BSC
HRPD
Sessions
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
350
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
Auth
Successf
ul Ratio
Access
Authentication
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
Access
Authentication
Attempts[Times]
times
Performance
Stat of BSC
HRPD
Sessions
Access
Authentication
Rejections [%]
none
Performance
Stat of BSC
HRPD
Sessions
[Access Authentication
Rejections[Times]]/([Access
Authentication
Attempts[Times]]-[Successful
Access
Authentications[Times]])*{10
0}
Access
Authentication LCP
Failure [%]
none
Performance
Stat of BSC
HRPD
Sessions
Access
Authentication
Apply Resource
Failure [%]
none
Performance
Stat of BSC
HRPD
Sessions
[Access Authentication No
Resource[Times]]/([Access
Authentication
Attempts[Times]]-[Successful
Access
Authentications[Times]])*{10
0}
Causes
of the
Access
Auth Fail
Issue 01 (2016-09-15)
351
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
Authentication
Rejections(Other
causes)[%]
none
Performance
Stat of BSC
HRPD
Sessions
([Access Authentication
Attempts[Times]]-[Successful
Access
Authentications[Times]][Access Authentication
Rejections[Times]]-[Access
Authentication LCP
Negotiation Failure[Times]][Access Authentication No
Resource[Times]])/([Access
Authentication
Attempts[Times]]-[Successful
Access
Authentications[Times]])*{10
0}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 01 (2016-09-15)
352
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD
Session
KPI
HRPD Session
Setup Success
Ratio[%]
Performance
Stat of
Carrier
HRPD
Sessions
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD
Session
Performa
nce
HRPD Session
Setup Success
Ratio[%]
Performance
Stat of
Carrier
HRPD
Sessions
353
PRS
Performance Report Reference
Subrep
ort
Name
Accessab
lity
Call
Retainabi
lity
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
Authentication
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
EV-DO Paging
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
Connection Success
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Setup
Connection Success
Ratio(DO B)[%]
Performance
Stat of BSC
EV-DO
Connection
Setup
Connection Drop
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Release
Connection Drop
Ratio(DO B)[%]
Performance
Stat of BSC
EV-DO
Connection
Release
Traffic Drop
Ratio[Minute]
none
EV-DO BSC
Traffic
Performance
Stat
354
PRS
Performance Report Reference
Subrep
ort
Name
Mobility
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic Drop
Ratio(DO B)
[minute]
none
EV-DOB
BSC Traffic
Performance
Stat
Intra-BS Soft HO
Success Ratio[%]
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
CS of Call Release
Num
times
CS Call
Drop
Performance
Stat
PS of Call Release
Num
times
PS Call Drop
Performance
Stat
Location Update
Assignment Success
Ratio[%]
none
Performance
Stat of BSC
HRPD
Sessions
([Location Update
Assignment(Location
Assignment Sent)[Times]][Location Update
Uncompletion(No Location
Complete Received)
[Times]])*{100}/[Location
Update Attempts(Location
Notification Received)
[Times]]*{100}
Intra-AN Hard HO
Success Ratio(DO
B)[%]
Performance
Stat of IntraAN Hard HO
355
PRS
Performance Report Reference
Subrep
ort
Name
Service
Integrity
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Successful Inter-AN
Incoming Hard HOs
Ratio(DO B)
none
Performance
Stat of InterAN Hard HO
[Successful Inter-AN
Incoming Hard HOs(DO B)
[Times]]/[Inter-AN Incoming
Hard HO Requests(DO B)
[Times]]*{100}
Successful Inter-AN
Hard HOs
Ratio(DOB)
none
Performance
Stat of InterAN Hard HO
Average Forward
Speed During of
Connetion Hoding
none
DO TCH
Forward
RLP
Throughput
Stat
none
RLP
Throughput
Stat
RLP
Throughput
Stat
RLP
Throughput
Stat
RLP
Throughput
Stat
RLP
Throughput
Stat
356
PRS
Performance Report Reference
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Network
Capabilit
y
Forward RLP
Throughput[Kbps]
none
Performance
Stat of EVDO Service
Data
Throughput
Reverse RLP
Throughput[kbps]
none
RLP
Throughput
Stat
Forward SAP
Throughput (DO B)
[Kbps]
none
RLP
Throughput
Stat
Reverse RLP
Throughput (DO B)
[Kbps]
none
Do Carrier
Performance
Mesurement
Traffic Density on
TCH[Erl]
none
EV-DO BSC
Traffic
Performance
Stat
Traffic Density on
TCH(DO B)[Erl]
none
EV-DOB
Carrier
Traffic
Performance
Stat
357
PRS
Performance Report Reference
Subrep
ort
Name
Network
Coverage
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Ratio of Carriers
with High Traffic on
TCH[%]
none
CS Call
Drop
Performance
Stat
Ratio of Carriers
with High Traffic on
TCH(DO B)[%]
none
CS Call
Drop
Performance
Stat
Soft HO Ratio[%]
none
EV-DO BSC
Traffic
Performance
Stat
358
PRS
Performance Report Reference
Subrep
ort
Name
Resource
Usage
Ratio
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Soft HO Ratio(DO
B)
none
EV-DOB
BSC Traffic
Performance
Stat
none
CS Call
Drop
Performance
Stat
count((([Access Times by
Access Pilot
Strength(-10.5,-31.5)[Times]]
+[Access Times by Access
Pilot Strength(-7.5,-10)
[Times]])/([Access Times by
Access Pilot Strength(0,2)
[Times]]+[Access Times by
Access Pilot
Strength(-2.5,-4.5)[Times]]+
[Access Times by Access Pilot
Strength(-5,-7)[Times]]+
[Access Times by Access Pilot
Strength(-10.5,-31.5)[Times]]
+[Access Times by Access
Pilot Strength(-7.5,-10)
[Times]]))>0.1)/
count(1=1)*{100}
Worst Carrier
Ratio[%]
none
CS Call
Drop
Performance
Stat
count(([Connection
Requests[Times]]>100)and((([
Successful Connection
Times[Times]]/[Connection
Requests[Times]])*{100})<0.
96)or(((([Connection
release(RF lost)[Times]]+
[Connection release(Other
causes)[Times]]+[Connection
Release (HHO Fail)[Times]])/
[Successful Connection
Times[Times]])*{100})>0.03)
)/count(1=1)*{100}
359
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Worst Carrier
Ratio(DO B)[%]
none
CS Call
Drop
Performance
Stat
count((((([Successful
Connection Times(DO B)
[Times]]/[Connection
Requests(DO B)
[Times]])*{100})<0.96)and([
DO B Traffic Channel
Connection Duration(DO B)
[Second]]/{GP})>2.5))/
count(1=1)*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Service
Integrity
RLP
Throughput
Stat
360
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RLP
Throughput
Stat
Average Forward
Speed During of
Connetion
Hoding[kbps]
none
DO TCH
Forward
RLP
Throughput
Stat
RLP
Throughput
Stat
RLP
Throughput
Stat
Average Forward
Speed During of
Connetion
Hoding(DO B)
none
DO TCH
Forward
RLP
Throughput
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
8.2.3.2 Single Carrier Avg Reverse Speed During DO Conn Hoding Report
Report Type
Simple Report
Issue 01 (2016-09-15)
361
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Average
Reverse
Speed
Average Reverse
Speed During of DO
Connetion Hoding
none
Do Carrier
Performance
Mesurement
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
8.2.3.3 Single Carrier Ava Reverse Speed During DO Conn Hoding Report
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Issue 01 (2016-09-15)
362
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Average
Reverse
Speed
BottomN
Average Reverse
Speed During of DO
Connetion Hoding
none
Do Carrier
Performance
Mesurement
Average Forward
Speed During of DO
Connetion Hoding
none
DO TCH
Forward
RLP
Throughput
Stat
Traffic Drop
Ratio(DO B)
[minute]
none
EV-DOB
Carrier
Traffic
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
363
PRS
Performance Report Reference
8.2.3.4 Single Carrier Avg Forward Speed During DO Conn Hoding Report
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Average
Forward
Speed
Average Forward
Speed During of DO
Connetion Hoding
none
DO TCH
Forward
RLP
Throughput
Stat
Average
Forward
Speed
DOB FTCH
Forward RLP Layer
Transmit
Throughput[byte]
byte
DO TCH
Forward
RLP
Throughput
Stat
Average
Forward
Speed
BottomN
Average Forward
Speed During of DO
Connetion Hoding
none
DO TCH
Forward
RLP
Throughput
Stat
364
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Reverse
Speed During of DO
Connetion
Hoding[Times]
none
Do Carrier
Performance
Mesurement
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
8.2.3.5 Single Carrier Avg F-Speed During DO Conn Hoding Carrier Report
Report Type
Simple Report
NE Type
CBSC
Object Type
Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Average
Forward
Speed
DOB FTCH
Forward RLP Layer
Transmit
Throughput[byte]
bytes
DO TCH
Forward
RLP
Throughput
Stat
365
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Average
Forward
Speed
BottomN
Average Forward
Speed During of DO
Connetion Hoding
no
unit
DO TCH
Forward
RLP
Throughput
Stat
Average Reverse
Speed During of DO
Connetion
Hoding[Times]
no
unit
Do Carrier
Performance
Mesurement
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Issue 01 (2016-09-15)
366
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Forward
and
Reverse
Retransm
it
RLP
Throughput
Stat
RLP
Throughput
Stat
Forward
Reverse
Retransm
it(DOB)
RLP
Throughput
Stat
RLP
Throughput
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 01 (2016-09-15)
367
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Forward
RLP
Retransm
it TopN
none
DO TCH
Forward
RLP
Throughput
Stat
DO FTCH Forward
RLP Layer Transmit
Throughput[byte]
none
DO TCH
Forward
RLP
Throughput
Stat
DO FTCH Forward
RLP Layer
Retransmit
Throughput[byte]
none
DO TCH
Forward
RLP
Throughput
Stat
Octets Resent on
request of AN Ratio
Do Carrier
Performance
Mesurement
RLP Octets
Received on Reverse
Channels[KB]
kiloby
tes
Do Carrier
Performance
Mesurement
byte
Do Carrier
Performance
Mesurement
Octets Resent on
request of AN[Byte]
byte
Do Carrier
Performance
Mesurement
kiloby
tes
Do Carrier
Performance
Mesurement
Reverse
Abort[Times]
times
Do Carrier
Performance
Mesurement
Reverse
RLP
Retransm
it TopN
Issue 01 (2016-09-15)
368
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Forward
Feel Avg
Rate
BottomN
User Forward
Average Feeling
Rate During Data
Transmission[kbps]
none
DO TCH
Forward
RLP
Throughput
Stat
Forward
Avg Rate
BottomN
Average Forward
Speed During of DO
Connetion Hoding
none
DO TCH
Forward
RLP
Throughput
Stat
369
PRS
Performance Report Reference
Subrep
ort
Name
Forward
Avg Feel
Rate
BottomN
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Reverse
Speed During of DO
Connetion Hoding
none
Do Carrier
Performance
Mesurement
User Forward
Average Feeling
Rate During Data
Transmission[kbps]
none
DO TCH
Forward
RLP
Throughput
Stat
Average Forward
Speed During of DO
Connetion Hoding
none
DO TCH
Forward
RLP
Throughput
Stat
Average Reverse
Speed During of DO
Connetion Hoding
none
Do Carrier
Performance
Mesurement
370
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Forward
Avg Rate
TopN
Traffic Drop
Ratio(DO B)
[minute]
none
EV-DOB
Carrier
Traffic
Performance
Stat
Average Forward
Speed During of DO
Connetion Hoding
none
DO TCH
Forward
RLP
Throughput
Stat
Average Reverse
Speed During of DO
Connetion
Hoding[Times]
none
Do Carrier
Performance
Mesurement
User Forward
Average Feeling
Rate During Data
Transmission[kbps]
none
DO TCH
Forward
RLP
Throughput
Stat
Forward
Avg Feel
Rate
TopN
Issue 01 (2016-09-15)
371
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Forward
Speed During of DO
Connetion Hoding
none
DO TCH
Forward
RLP
Throughput
Stat
Average Reverse
Speed During of DO
Connetion
Hoding[Times]
none
Do Carrier
Performance
Mesurement
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 01 (2016-09-15)
372
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Service
Integrity
Average Forward
Speed During of
Connetion Hoding
none
DO TCH
Forward
RLP
Throughput
Stat
none
DO TCH
Forward
RLP
Throughput
Stat
User Forward
Average Feeling
Rate During Data
Transmission[kbps]
none
DO TCH
Forward
RLP
Throughput
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Issue 01 (2016-09-15)
373
PRS
Performance Report Reference
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Call
Retainabi
lity
Connection Drop
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Release
Connection Drop
Ratio(DO B)[%]
Performance
Stat of BSC
EV-DO
Connection
Release
Traffic Drop
Ratio[Minute]
none
EV-DO BSC
Traffic
Performance
Stat
Traffic Drop
Ratio(DO B)
[minute]
none
EV-DOB
BSC Traffic
Performance
Stat
374
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Call
Drop
Ratio
Connection Drop
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Release
Connection Drop
Ratio(DO B)[%]
Performance
Stat of BSC
EV-DO
Connection
Release
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
375
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Cause of
Call
Drops
Connection Released
(RF lost)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Release
Connection Released
(Dormancy timer
expired)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Release
Connection Released
(Dormancy timer
expired without AT
response)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Release
Connection Released
(Other causes)
[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Release
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
376
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Call
Drop
Ratio
TopN
Connection Drop
Ratio[%]
Performance
Stat of
Carrier EVDO
Connection
Release
Connection
Drop[times]
none
EV-DOB
Carrier
Traffic
Performance
Stat
Normal Connection
Release[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
Connection
release(RF lost)
[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
Connection
release(Dormancy
timer expired)
[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
377
PRS
Performance Report Reference
Subrep
ort
Name
Call
Drop
Ratio
TopN(D
O B)
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Connection
release(Dormancy
timer expired
without AT
response)[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
Connection Release
(HHO Fail)[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
Connection
release(Other
causes)[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
Connection Drop
Ratio(DO B)[%]
Performance
Stat of
Carrier EVDO
Connection
Release
Connection
Drop(DO B)[times]
none
EV-DOB
Carrier
Traffic
Performance
Stat
Normal Connection
Release(DO B)
[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
378
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Connection
release(RF lost)(DO
B)[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
Connection
release(Dormancy
timer expired)(DO
B)[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
Connection Release
(HHO Fail)(DO B)
[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
Connection
release(Other
causes)(DO B)
[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
Connection Released
(Interoperation
Between 1X and
DO)(DO B)[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
379
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Call
Retainabi
lity
Connection Drop
Ratio[%]
Performance
Stat of
Carrier EVDO
Connection
Release
Connection Drop
Ratio(DO B)[%]
Performance
Stat of
Carrier EVDO
Connection
Release
Traffic Drop
Ratio[Minute]
none
EV-DO
Carrier
Traffic
Performance
Stat
380
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic Drop
Ratio(DO B)
[minute]
none
EV-DOB
Carrier
Traffic
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Issue 01 (2016-09-15)
381
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accessib
ility
Connection Success
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Setup
Connection Success
Ratio(DO B)[%]
Performance
Stat of BSC
EV-DO
Connection
Setup
EV-DO Paging
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Issue 01 (2016-09-15)
382
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Connecti
on Setup
Success
Ratio
Connection
Requests[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Connection Success
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Setup
Connection
Requests(DO B)
[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Connection Success
Ratio(DO B)[%]
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick Connection
Requests[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick Connection
Success Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick
Conn
Setup
Success
Ratio
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
383
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Conn
Setup
Failure
Reason
Connection Failures
(Call Resource
Allocation Failures)
[Times]
none
Performance
Stat of BSC
EV-DO
Connection
Setup
[AN-Initiated Connection
Failures (Call resources
allocation failure)[Times]]+
[AT-Initiated Connection
Failures (Call resources
allocation failure)[Times]]
Connection Failures
(No R-TCH
Detected)[Times]
none
Performance
Stat of BSC
EV-DO
Connection
Setup
[AN-Initiated Connection
Failures (No R-TCH
Detected)[Times]]+[ATinitiated Connection Failures
(No R-TCH Detected)
[Times]]
Connection Failures
(No Traffic Channel
Complete received)
[Times]
none
Performance
Stat of BSC
EV-DO
Connection
Setup
[AN-Initiated Connection
Failures (No Traffic Channel
Complete received)[Times]]+
[AT-Initiated Connection
Failures (No Traffic Channel
Complete received)[Times]]
Connection Failures
(MEID Connection
rejected )[Times]
none
Performance
Stat of BSC
EV-DO
Connection
Setup
[AT-Initiated Connection
Failures (MEID Connection
Reject)[Times]]+[AN-Initiated
Connection Failures (MEID
Connection Reject)[Times]]
Connection
Failures(other
reason)[Times]
none
Performance
Stat of BSC
EV-DO
Connection
Setup
[AN-Initiated Connection
Failures (Other causes)
[Times]]+[AT-Initiated
Connection Failures (Other
causes)[Times]]
384
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Quick
Conn
Setup
Failure
Reason
Quick Connection
Failures (Call
resources allocation
failure)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick Connection
Failures (No R-TCH
detected)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick Connection
Failures (No Traffic
Channel Complete
received)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick Connection
Failures (MEID
Connection Reject)
[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick Connection
Failures (Other
causes)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Issue 01 (2016-09-15)
385
PRS
Performance Report Reference
Object Type
CBSC Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Conn
Setup
Succ
Ratio
BottomN
Connection Success
Ratio[%]
Performance
Stat of
Carrier EVDO
Connection
Setup
Connection
Requests[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Setup
Connection Failures
(Call resources
allocation failure)
[Times]
none
Performance
Stat of
Carrier EVDO
Connection
Setup
[AN-Initiated Connection
Failures (Call resources
allocation failure)[Times]]+
[AT-Initiated Connection
Failures (Call resources
allocation failure)[Times]]
Connection Failures
(No R-TCH
Detected)[Times]
none
Performance
Stat of
Carrier EVDO
Connection
Setup
[AN-Initiated Connection
Failures (No R-TCH
Detected)[Times]]+[ATinitiated Connection Failures
(No R-TCH Detected)
[Times]]
Connection Failures
(No Traffic Channel
Complete received)
[Times]
none
Performance
Stat of
Carrier EVDO
Connection
Setup
[AN-Initiated Connection
Failures (No Traffic Channel
Complete received)[Times]]+
[AT-Initiated Connection
Failures (No Traffic Channel
Complete received)[Times]]
Connection Failures
(MEID Connection
Reject)[Times]
none
Performance
Stat of
Carrier EVDO
Connection
Setup
[AT-Initiated Connection
Failures (MEID Connection
Reject)[Times]]+[AN-Initiated
Connection Failures (MEID
Connection Reject)[Times]]
386
PRS
Performance Report Reference
Subrep
ort
Name
Conn
Setup
Failure
Times
TopN
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Connection Failures
(Other causes)
[Times]
none
Performance
Stat of
Carrier EVDO
Connection
Setup
[AN-Initiated Connection
Failures (Other causes)
[Times]]+[AT-Initiated
Connection Failures (Other
causes)[Times]]
Connection Failures
Times[Times]
none
Performance
Stat of
Carrier EVDO
Connection
Setup
[Connection
Requests[Times]]-[Successful
Connection Times[Times]]
Connection Success
Ratio[%]
Performance
Stat of
Carrier EVDO
Connection
Setup
Connection Failures
(Call resources
allocation failure)
[Times]
none
Performance
Stat of
Carrier EVDO
Connection
Setup
[AN-Initiated Connection
Failures (Call resources
allocation failure)[Times]]+
[AT-Initiated Connection
Failures (Call resources
allocation failure)[Times]]
Connection Failures
(No R-TCH
Detected)[Times]
none
Performance
Stat of
Carrier EVDO
Connection
Setup
[AN-Initiated Connection
Failures (No R-TCH
Detected)[Times]]+[ATinitiated Connection Failures
(No R-TCH Detected)
[Times]]
Connection Failures
(No Traffic Channel
Complete received)
[Times]
none
Performance
Stat of
Carrier EVDO
Connection
Setup
[AN-Initiated Connection
Failures (No Traffic Channel
Complete received)[Times]]+
[AT-Initiated Connection
Failures (No Traffic Channel
Complete received)[Times]]
Connection Failures
(MEID Connection
Reject)[Times]
none
Performance
Stat of
Carrier EVDO
Connection
Setup
[AT-Initiated Connection
Failures (MEID Connection
Reject)[Times]]+[AN-Initiated
Connection Failures (MEID
Connection Reject)[Times]]
387
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Connection Failures
(Other causes)
[Times]
none
Performance
Stat of
Carrier EVDO
Connection
Setup
[AN-Initiated Connection
Failures (Other causes)
[Times]]+[AT-Initiated
Connection Failures (Other
causes)[Times]]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Avg
Conn
Setup
Duration
Connection Setup
Duration
none
CS Call
Drop
Performance
Stat
sum([Successful Connection
Times[Times]]*[Connection
Setup Average
Duration[Millisecond]])/
sum(([Successful Connection
Times[Times]]*[Connection
Setup Average
Duration[Millisecond]]))
388
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Successful
Connection
Times[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Setup
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Conn
Setup
Duration
TopN
Connection Setup
Average
Duration[Millisecon
d]
ms
Performance
Stat of
Carrier EVDO
Connection
Setup
389
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Connection
Requests[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Setup
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Paging
Success
Ratio
EV-DO Paging
Attempts[Times]
times
Performance
Stat of BSC
HRPD
Sessions
EV-DO Paging
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
390
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Orig
Time to
Term
Time
Ratio
none
Performance
Stat of BSC
EV-DO
Connection
Setup
[AN-Initiated Connection
Requests[Times]]/[ATInitiated Connection
Requests[Times]]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accessib
ility
Connection Success
Ratio[%]
Performance
Stat of
Carrier EVDO
Connection
Setup
391
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Connection Success
Ratio(DO B)[%]
Performance
Stat of
Carrier EVDO
Connection
Setup
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Capacity
Analysis
Forward RLP
Throughput[Mbps]
none
Performance
Stat of EVDO Service
Data
Throughput
392
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Reverse RLP
Throughput[Mbps]
none
RLP
Throughput
Stat
Traffic Density on
TCH[Erl]
none
EV-DO BSC
Traffic
Performance
Stat
Average Traffic
Density on TCH of
High-Load
Carriers[Erl]
none
RLP
Throughput
Stat
Forward SAP
Throughput (DO B)
[Kbps]
none
RLP
Throughput
Stat
RLP Octets
Received on Reverse
Channels(DOB)
[KB]
none
RLP
Throughput
Stat
Traffic Density on
TCH(DO B)
none
EV-DOB
BSC Traffic
Performance
Stat
393
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
Authentication
Rejections(Other
causes)[%]
none
Performance
Stat of BSC
HRPD
Sessions
([Access Authentication
Attempts[Times]]-[Successful
Access
Authentications[Times]][Access Authentication
Rejections[Times]]-[Access
Authentication LCP
Negotiation Failure[Times]][Access Authentication No
Resource[Times]])/([Access
Authentication
Attempts[Times]]-[Successful
Access
Authentications[Times]])*{10
0}
Ratio of Carriers
with High Traffic on
TCH[%]
none
CS Call
Drop
Performance
Stat
Ratio of Carriers
with High Traffic on
TCH(DO B)[%]
none
CS Call
Drop
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Issue 01 (2016-09-15)
394
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic(D
O)
Traffic Density on
TCH[Erl]
none
EV-DO BSC
Traffic
Performance
Stat
CE Traffic Density
on TCH[Erl]
none
EV-DO BSC
Traffic
Performance
Stat
MacIndex Traffic
Density on
TCH[Erl]
none
EV-DO BSC
Traffic
Performance
Stat
395
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic(D
OB)
Traffic Density on
TCH(DO B)
none
EV-DOB
BSC Traffic
Performance
Stat
CE Traffic Density
on TCH(DO B)[Erl]
none
EV-DOB
BSC Traffic
Performance
Stat
MacIndex Traffic
Density on TCH(DO
B)[Erl]
none
EV-DOB
BSC Traffic
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 01 (2016-09-15)
396
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Highest
Traffic
on TCH
Traffic Density on
TCH[Erl]
none
EV-DO
Carrier
Traffic
Performance
Stat
Traffic Channel
Connection
Duration[Second]
none
EV-DO
Carrier
Traffic
Performance
Stat
Reverse CE Traffic
Density[Erl]
none
EV-DO
Carrier
Traffic
Performance
Stat
MacIndex Traffic
Density on
TCH[Erl]
none
EV-DO
Carrier
Traffic
Performance
Stat
Max Active
Connectors of
Carrier[Entries]
numb
er
Performance
Stat of
Carrier EVDO
Connection
Release
Traffic Density on
TCH(DO B)[Erl]
none
EV-DOB
Carrier
Traffic
Performance
Stat
Highest
Traffic
on
TCH(DO
B)
Issue 01 (2016-09-15)
397
PRS
Performance Report Reference
Subrep
ort
Name
Lowest
Traffic
on TCH
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
DO B Traffic
Channel Connection
Duration(DO B)
[Second]
EV-DOB
Carrier
Traffic
Performance
Stat
Reverse CE Traffic
Density(DO B)
none
EV-DOB
Carrier
Traffic
Performance
Stat
MacIndex Traffic
Density on TCH(DO
B)[Erl]
none
EV-DOB
Carrier
Traffic
Performance
Stat
Max Active
Connectors of
Carrier[Entries]
numb
er
Performance
Stat of
Carrier EVDO
Connection
Release
Traffic Density on
TCH[Erl]
none
EV-DO
Carrier
Traffic
Performance
Stat
Traffic Density on
TCH(DO B)[Erl]
none
EV-DOB
Carrier
Traffic
Performance
Stat
Reverse CE Traffic
Density[Erl]
none
EV-DO
Carrier
Traffic
Performance
Stat
398
PRS
Performance Report Reference
Subrep
ort
Name
Lowest
Traffic
on
TCH(DO
B)
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
MacIndex Traffic
Density on
TCH[Erl]
none
EV-DO
Carrier
Traffic
Performance
Stat
Max Active
Connectors of
Carrier[Entries]
numb
er
Performance
Stat of
Carrier EVDO
Connection
Release
Traffic Density on
TCH(DO B)[Erl]
none
EV-DOB
Carrier
Traffic
Performance
Stat
DO B Traffic
Channel Connection
Duration(DO B)
[Second]
EV-DOB
Carrier
Traffic
Performance
Stat
Reverse CE Traffic
Density(DO B)
none
EV-DOB
Carrier
Traffic
Performance
Stat
MacIndex Traffic
Density on TCH(DO
B)[Erl]
none
EV-DOB
Carrier
Traffic
Performance
Stat
Max Active
Connectors of
Carrier[Entries]
numb
er
Performance
Stat of
Carrier EVDO
Connection
Release
399
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CCH
Load
DO CCH Average
Slot Occupancy
Ratio[%]
none
DO CCH
Using Ratio
Performance
Stat
DO CCH Average
Synchronous Packet
Occupancy Ratio[%]
none
DO CCH
Using Ratio
Performance
Stat
DO CCH Average
Sub-Synchronous
Packet Occupancy
Ratio[%]
none
DO CCH
Using Ratio
Performance
Stat
DO CCH Average
Asynchronous
Packet Occupancy
Ratio[%]
none
DO CCH
Using Ratio
Performance
Stat
400
PRS
Performance Report Reference
Subrep
ort
Name
DO ACH
Load
Analysis
Forward
Load
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
DO CCH Discarded
Sync Message
Ratio[%]
none
DO CCH
Discard
Performance
Stat
DO CCH Discarded
Asynchronous
Message Ratio[%]
none
DO CCH
Discard
Performance
Stat
DO ACH Average
Slot Occupancy
Raito[%]
none
DO ACH
performance
Stat
DO ACH Maximum
Slot Occupancy
Raito[%]
none
DO ACH
performance
Stat
DO ACH Minimum
Slot Occupancy
Raito[%]
DO ACH
performance
Stat
DO ACH Average
Collision Occupancy
Raito[%]
none
DO ACH
performance
Stat
DO ACH Maximum
Collision Occupancy
Raito[%]
none
DO ACH
performance
Stat
DO ACH Minimum
Collision Occupancy
Raito[%]
DO ACH
performance
Stat
DO TCH Average
Slot Occupancy
Ratio[0.01%]
none
DO TCH
Load
Performance
Stat
DO TCH Maximum
Slot Occupancy
Ratio[0.01%]
none
DO TCH
Load
Performance
Stat
DO FTCH Forward
RLP Layer Transmit
Throughput[byte]
none
DO TCH
Forward
RLP
Throughput
Stat
401
PRS
Performance Report Reference
Subrep
ort
Name
Reverse
Load
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic Density on
TCH[Erl]
none
EV-DO
Carrier
Traffic
Performance
Stat
DOB FTCH
Forward RLP Layer
Transmit
Throughput[byte]
byte
DO TCH
Forward
RLP
Throughput
Stat
DO TCH Average
ROT[1/8db]
none
DO TCH
Load
Performance
Stat
DO TCH Maximum
ROT[1/8db]
none
DO TCH
Load
Performance
Stat
DO TCH Minimum
ROT[1/8db]
none
DO TCH
Load
Performance
Stat
DO TCH Reverse
Load[1/8db]
none
DO TCH
Load
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
402
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Forward
Reverse
RLP
Through
put
Forward RLP
Throughput[MB]
none
RLP
Throughput
Stat
Reverse RLP
Throughput[MB]
none
RLP
Throughput
Stat
Forward RLP
Throughput(DO B)
[MB]
none
RLP
Throughput
Stat
Reverse RLP
Throughput(DO B)
[MB]
none
RLP
Throughput
Stat
Forw and
Reve
Through
put(DOB
)
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
403
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Max
Forward
RLP
Through
put
DO FTCH Forward
RLP Layer Transmit
Throughput[KB]
none
DO TCH
Forward
RLP
Throughput
Stat
DO FTCH Forward
RLP Layer
Retransmit
Throughput[KB]
none
DO TCH
Forward
RLP
Throughput
Stat
Max
Forward
RLP
Through
put(DOB
)
DOB FTCH
Forward RLP Layer
Transmit
Throughput[byte]
byte
DO TCH
Forward
RLP
Throughput
Stat
DOB FTCH
Forward SAR Layer
Retransmit
Throughput[KB]
none
DO TCH
Forward
RLP
Throughput
Stat
Min
Forward
RLP
Through
put
DO FTCH Forward
RLP Layer Transmit
Throughput[KB]
none
DO TCH
Forward
RLP
Throughput
Stat
404
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DO FTCH Forward
RLP Layer
Retransmit
Throughput[KB]
none
DO TCH
Forward
RLP
Throughput
Stat
Min
Forward
RLP
Through
put(DOB
)
DOB FTCH
Forward RLP Layer
Transmit
Throughput[byte]
byte
DO TCH
Forward
RLP
Throughput
Stat
DOB FTCH
Forward SAR Layer
Retransmit
Throughput[KB]
none
DO TCH
Forward
RLP
Throughput
Stat
Max
Reverse
RLP
Through
put
RLP Octets
Received on Reverse
Channels[KB]
kiloby
tes
Do Carrier
Performance
Mesurement
none
Do Carrier
Performance
Mesurement
Octets Resent on
request of AN[KB]
none
Do Carrier
Performance
Mesurement
kiloby
tes
Do Carrier
Performance
Mesurement
Reverse
Abort[Times]
times
Do Carrier
Performance
Mesurement
RLP Octets
Received on Reverse
Channels (DO B)
[KB]
kiloby
tes
Do Carrier
Performance
Mesurement
none
Do Carrier
Performance
Mesurement
Octets Resent on
request of AN[KB]
none
Do Carrier
Performance
Mesurement
Max
Reverse
RLP
Through
put(DOB
)
Issue 01 (2016-09-15)
405
PRS
Performance Report Reference
Subrep
ort
Name
Min
Reverse
RLP
Through
put
Min
Reverse
RLP
Through
put(DOB
)
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
kiloby
tes
Do Carrier
Performance
Mesurement
Reverse
Abort[Times]
times
Do Carrier
Performance
Mesurement
RLP Octets
Received on Reverse
Channels[KB]
kiloby
tes
Do Carrier
Performance
Mesurement
none
Do Carrier
Performance
Mesurement
Octets Resent on
request of AN[KB]
none
Do Carrier
Performance
Mesurement
kiloby
tes
Do Carrier
Performance
Mesurement
Reverse
Abort[Times]
times
Do Carrier
Performance
Mesurement
RLP Octets
Received on Reverse
Channels (DO B)
[KB]
kiloby
tes
Do Carrier
Performance
Mesurement
none
Do Carrier
Performance
Mesurement
Octets Resent on
request of AN[KB]
none
Do Carrier
Performance
Mesurement
kiloby
tes
Do Carrier
Performance
Mesurement
Reverse
Abort[Times]
times
Do Carrier
Performance
Mesurement
406
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Capacity
Analysis
Traffic Density on
TCH[Erl]
none
EV-DO
Carrier
Traffic
Performance
Stat
Carrier Forward
RLP
Throughput[byte]
none
DO TCH
Forward
RLP
Throughput
Stat
407
PRS
Performance Report Reference
Subrep
ort
Name
Capacity
Analysis(
DO B)
Counter
Coun
ter
Unit
Function
Subset
Formula
DO TCH Average
Slot Occupancy
Ratio[%]
none
DO TCH
Load
Performance
Stat
DO CCH Average
Slot Occupancy
Ratio[%]
none
DO CCH
Using Ratio
Performance
Stat
DO ACH Average
Slot Occupancy
Raito[%]
none
DO ACH
performance
Stat
Reverse RLP
Throughput[kbps]
none
Do Carrier
Performance
Mesurement
Traffic Density on
TCH(DO B)[Erl]
none
EV-DOB
Carrier
Traffic
Performance
Stat
Forward SAP
Throughput (DO B)
[Kbps]
none
DO TCH
Forward
RLP
Throughput
Stat
Reverse RLP
Throughput (DO B)
[Kbps]
none
Do Carrier
Performance
Mesurement
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
408
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Network
Coverage
Analysis
Soft HO Ratio[%]
none
EV-DO BSC
Traffic
Performance
Stat
409
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Soft HO Ratio(DO
B)
none
EV-DOB
BSC Traffic
Performance
Stat
none
CS Call
Drop
Performance
Stat
count((([Access Times by
Access Pilot
Strength(-10.5,-31.5)[Times]]
+[Access Times by Access
Pilot Strength(-7.5,-10)
[Times]])/([Access Times by
Access Pilot Strength(0,2)
[Times]]+[Access Times by
Access Pilot
Strength(-2.5,-4.5)[Times]]+
[Access Times by Access Pilot
Strength(-5,-7)[Times]]+
[Access Times by Access Pilot
Strength(-10.5,-31.5)[Times]]
+[Access Times by Access
Pilot Strength(-7.5,-10)
[Times]]))>0.1)/
count(1=1)*{100}
Ratio of Carriers
with Reverse Link
Interference[%]
none
CS Call
Drop
Performance
Stat
410
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Carrier
order by
Main
RSSI
Desc
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
Carrier
order by
Div
RSSI
Desc
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
Main and
Div
RSSI
Diff
Desc
Difference Between
Main And Diversity
RSSI Average Value
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
411
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
none
RSSI
Performance
Stat
Carrier
order by
Main
RSSI
Asc
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
Carrier
order by
Div
RSSI
Asc
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Issue 01 (2016-09-15)
412
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Pilot
Strength
Proportio
n
Access Times by
Access Pilot
Strength(-0,-2)
Ratio[%]
none
EV-DO BSC
Cover
Performance
Stat of
Access State
Access Times by
Access Pilot
Strength(-2.5,-4.5)
Ratio[%]
none
EV-DO BSC
Cover
Performance
Stat of
Access State
Access Times by
Access Pilot
Strength(-5,-7)
Ratio[%]
none
EV-DO BSC
Cover
Performance
Stat of
Access State
413
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access Times by
Access Pilot
Strength(-7.5,-10)Ra
tio
none
EV-DO BSC
Cover
Performance
Stat of
Access State
Access Times by
Access Pilot
Strength(-10.5,-31.5)
[Times]
none
EV-DO BSC
Cover
Performance
Stat of
Access State
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Issue 01 (2016-09-15)
414
PRS
Performance Report Reference
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Soft
Handoff
Ratio
Soft HO Ratio[%]
none
EV-DO BSC
Traffic
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
415
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Soft
Handoff
Ratio
Desc
Soft Handoff
Ratio[%]
none
EV-DO BSC
Traffic
Performance
Stat
{100}*([DO 0 Traffic
Channel CE Total time(DO 0)
[Second]]+[DO A Traffic
Channel CE Total time(DO A)
[Second]]+[DO B Traffic
Channel CE Duration (DO B)
[Second]]-[DO 0 Traffic
Channel Connection Total
time(DO 0) [Second]]-[DO A
Traffic Channel Connection
Total time(DO A) [Second]][DO B Traffic Channel
Connection Duration(DO B)
(Below Nine-Legs)[Second]])/
([DO 0 Traffic Channel CE
Total time(DO 0) [Second]]+
[DO A Traffic Channel CE
Total time(DO A) [Second]]+
[DO B Traffic Channel CE
Duration (DO B) [Second]])
DO Traffic Channel
Seizure Total time
none
EV-DO BSC
Traffic
Performance
Stat
CE Seizure Total
time[Second]
none
EV-DO BSC
Traffic
Performance
Stat
416
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Soft
Handoff
Ratio
Asc
Soft Handoff
Ratio[%]
none
EV-DO BSC
Traffic
Performance
Stat
{100}*([DO 0 Traffic
Channel CE Total time(DO 0)
[Second]]+[DO A Traffic
Channel CE Total time(DO A)
[Second]]+[DO B Traffic
Channel CE Duration (DO B)
[Second]]-[DO 0 Traffic
Channel Connection Total
time(DO 0) [Second]]-[DO A
Traffic Channel Connection
Total time(DO A) [Second]][DO B Traffic Channel
Connection Duration(DO B)
(Below Nine-Legs)[Second]])/
([DO 0 Traffic Channel CE
Total time(DO 0) [Second]]+
[DO A Traffic Channel CE
Total time(DO A) [Second]]+
[DO B Traffic Channel CE
Duration (DO B) [Second]])
DO Traffic Channel
Seizure Total time
none
EV-DO BSC
Traffic
Performance
Stat
CE Seizure Total
time[Second]
none
EV-DO BSC
Traffic
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
417
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Avg Pilot
Strength
Proportio
n
Access Times by
Access Pilot
Strength(0,2)[Times]
times
EV-DO
Carrier
Cover
Performance
Stat of
Access State
Access Times by
Access Pilot
Strength(-2.5,-4.5)
[Times]
times
EV-DO
Carrier
Cover
Performance
Stat of
Access State
Access Times by
Access Pilot
Strength(-5,-7)
[Times]
times
EV-DO
Carrier
Cover
Performance
Stat of
Access State
Access Times by
Access Pilot
Strength(-7.5,-10)
[Times]
times
EV-DO
Carrier
Cover
Performance
Stat of
Access State
418
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access Times by
Access Pilot
Strength(-10.5,-31.5)
[Times]
times
EV-DO
Carrier
Cover
Performance
Stat of
Access State
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-AN
HHO
Incoming
Outgoing
Successful Inter-AN
Incoming Hard HOs
Ratio[%]
none
Performance
Stat of InterAN Hard HO
{100}*[Successful Inter-AN
Incoming Hard HOs[Times]]/
[Inter-AN Incoming Hard HO
Requests[Times]]
419
PRS
Performance Report Reference
Subrep
ort
Name
Inter-AN
HHO
Income
Outgo(D
OB)
Inter-AN
HHO
Incoming
Fail
Inter-AN
HHO
Outcgoin
g Fail
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Successful Inter-AN
Hard HOs Ratio[%]
none
Performance
Stat of InterAN Hard HO
{100}*[Successful Inter-AN
Hard HOs[Times]]/[Inter-AN
Hard HO Requests[Times]]
Successful Inter-AN
Incoming Hard HOs
Ratio(DO B)
none
Performance
Stat of InterAN Hard HO
[Successful Inter-AN
Incoming Hard HOs(DO B)
[Times]]/[Inter-AN Incoming
Hard HO Requests(DO B)
[Times]]*{100}
Successful Inter-AN
Hard HOs Ratio(DO
B)
none
Performance
Stat of InterAN Hard HO
{100}*[Successful Inter-AN
Hard HOs(DO B)[Times]]/
[Inter-AN Hard HO
Requests(DO B)[Times]]
Inter-AN Incoming
Hard HOs Failures
(Resource
Allocation Failed)
[Times]
times
Performance
Stat of InterAN Hard HO
Inter-AN Incoming
Hard HOs Failures
(HO Execution
Failed)[Times]
times
Performance
Stat of InterAN Hard HO
Inter-AN Incoming
Hard HOs Failures
(Other causes)
[Times]
times
Performance
Stat of InterAN Hard HO
Inter-AN Hard HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of InterAN Hard HO
Inter-AN Hard HO
Failures (Requested
terrestrial resources
unavailable)[Times]
times
Performance
Stat of InterAN Hard HO
Inter-AN Hard HO
Failures (MS Not
detected by
destination pilot)
[Times]
times
Performance
Stat of InterAN Hard HO
Inter-AN Hard HO
Failures (Other
causes)[Times]
times
Performance
Stat of InterAN Hard HO
420
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-AN
HHO
Incoming
Success
Successful Inter-AN
Incoming Hard HOs
Ratio[%]
none
Performance
Stat of
Carrier InterAN Hard HO
{100}*[Successful Inter-AN
Incoming Hard HOs[Times]]/
[Inter-AN Incoming Hard HO
Requests[Times]]
Inter-AN Incoming
Hard HO
Requests[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Incoming
Hard HOs Failures
(Resource
Allocation Failed)
[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Incoming
Hard HOs Failures
(HO Execution
Failed)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
421
PRS
Performance Report Reference
Subrep
ort
Name
Incoming
Success
Bottom
N(DOB)
Outgoing
Success
BottomN
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-AN Incoming
Hard HOs Failures
(Other causes)
[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Successful Inter-AN
Incoming Hard HOs
Ratio(DO B)
none
Performance
Stat of
Carrier InterAN Hard HO
{100}*[Successful Inter-AN
Incoming Hard HOs(DO B)
[Times]]/[Inter-AN Incoming
Hard HO Requests(DO B)
[Times]]
Inter-AN Incoming
Hard HO
Requests(DO B)
[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Incoming
Hard HOs Failures
(HO Execution
Failed)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Incoming
Hard HOs Failures
(Other causes)
[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Successful Inter-AN
Incoming Hard
HOs[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Successful Inter-AN
Hard HOs Ratio[%]
none
Performance
Stat of
Carrier InterAN Hard HO
{100}*[Successful Inter-AN
Hard HOs[Times]]/[Inter-AN
Hard HO Requests[Times]]
Successful Inter-AN
Hard HOs[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Hard HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Hard HO
Failures (Requested
terrestrial resources
unavailable)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
422
PRS
Performance Report Reference
Subrep
ort
Name
Outgoing
Success
Bottom
N(DOB)
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-AN Hard HO
Failures (MS Not
detected by
destination pilot)
[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Hard HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Successful Inter-AN
Outgoing Hard HO
Ratio(DO B)[%]
none
Performance
Stat of
Carrier InterAN Hard HO
{100}*[Successful Inter-AN
Hard HOs(DO B)[Times]]/
[Inter-AN Hard HO
Requests(DO B)[Times]]
Inter-AN Hard HO
Requests(DO B)
[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Hard HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Hard HO
Failures (Requested
terrestrial resources
unavailable)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Hard HO
Failures (MS Not
detected by
destination pilot)
[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Hard HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
423
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS
HHO
Success
Ratio
Intra-AN Hard HO
Requests[Times]
times
Performance
Stat of IntraAN Hard HO
Intra-AN Hard HO
Success Ratio[%]
Performance
Stat of IntraAN Hard HO
Intra-AN Hard HO
Requests(DO B)
[Times]
times
Performance
Stat of IntraAN Hard HO
Intra-AN Hard HO
Success Ratio(DO
B)[%]
Performance
Stat of IntraAN Hard HO
Intra-AN Hard HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of IntraAN Hard HO
Intra-BS
HHO
Failures
Causes
Issue 01 (2016-09-15)
424
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-AN Hard HO
Failures (Requested
terrestrial resources
unavailable)[Times]
times
Performance
Stat of IntraAN Hard HO
Intra-AN Hard HO
Failures (MS Not
detected by
destination pilot)
[Times]
times
Performance
Stat of IntraAN Hard HO
Intra-AN Hard HO
Failures (Other
causes)[Times]
times
Performance
Stat of IntraAN Hard HO
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 01 (2016-09-15)
425
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS
HHO
SuccR
BottomN
Intra-AN Hard HO
Success Ratio[%]
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Requests[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Failures (Requested
terrestrial resources
unavailable)[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Failures (MS Not
detected by
destination pilot)
[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Success Ratio(DO
B)[%]
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Requests(DO B)
[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Failures (Requested
terrestrial resources
unavailable)[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-BS
HHO
SuccR
Bottom
N(DO B)
Issue 01 (2016-09-15)
426
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-AN Hard HO
Failures (MS Not
detected by
destination pilot)
[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Mobility
Analysis
KPI
Intra-BS Soft HO
Success Ratio[%]
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
427
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-AN Hard HO
Success Ratio[%]
Performance
Stat of IntraAN Hard HO
none
Performance
Stat of BSC
HRPD
Sessions
none
Performance
Stat of BSC
HRPD
Sessions
Successful Inter-AN
Incoming Hard HOs
Ratio(DO B)
none
Performance
Stat of InterAN Hard HO
[Successful Inter-AN
Incoming Hard HOs(DO B)
[Times]]/[Inter-AN Incoming
Hard HO Requests(DO B)
[Times]]*{100}
Successful Inter-AN
Hard HOs
Ratio(DOB)
none
Performance
Stat of InterAN Hard HO
Location Update
Assignment Success
Ratio[%]
none
Performance
Stat of BSC
HRPD
Sessions
([Location Update
Assignment(Location
Assignment Sent)[Times]][Location Update
Uncompletion(No Location
Complete Received)
[Times]])*{100}/[Location
Update Attempts(Location
Notification Received)
[Times]]*{100}
A13 Session
Information Query
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
Intra-AN Hard HO
Success Ratio(DO
B)[%]
Performance
Stat of IntraAN Hard HO
Successful Inter-AN
Incoming Hard HOs
Ratio[%]
none
Performance
Stat of InterAN Hard HO
{100}*[Successful Inter-AN
Incoming Hard HOs[Times]]/
[Inter-AN Incoming Hard HO
Requests[Times]]
428
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Successful Inter-AN
Hard HOs Ratio[%]
none
Performance
Stat of InterAN Hard HO
{100}*[Successful Inter-AN
Hard HOs[Times]]/[Inter-AN
Hard HO Requests[Times]]
PS of Call Release
Num
times
PS Call Drop
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-BS
SHO
Success
Ratio
Inter-BS Soft HO
Success Ratio(DO
B)[%]
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
429
PRS
Performance Report Reference
Subrep
ort
Name
Inter-BS
SHO
Failures
Causes
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-BS Soft HO
Requests (DO B)
[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Requests
Times[Times]
none
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Success [%]
none
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Failures (Radio
resources
unavailable) EVDO[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Failures (Requested
Abis resources
unavailable) EVDO[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Failures (Radio
interface abnormal)
EV-DO[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
430
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-BS Soft HO
Failures (MS
rejected) EVDO[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Failures (A17/A18
link setup failed)
EV-DO[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Failures (Other
causes) EVDO[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Issue 01 (2016-09-15)
431
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS
SHO
Success
Ratio
Intra-BS Soft HO
Success Ratio[%]
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Intra-BS Soft HO
requests EVDO[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Intra-BS Soft HO
Success Ratio(DO
B)[%]
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Intra-BS Soft HO
Requests (DO B)
[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Radio
resources
unavailable) EVDO[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Requested
Abis resources
unavailable)[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Radio
interface abnormal)
[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Intra-BS
SHO
Failures
Causes
Issue 01 (2016-09-15)
432
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS Soft HO
Failures (Other
causes)[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS
SHO
SuccR
BottomN
Intra-BS Soft HO
Success Ratio[%]
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
433
PRS
Performance Report Reference
Subrep
ort
Name
Intra-BS
SHO
SuccR
Bottom
N(DOB)
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS Soft HO
requests EVDO[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Radio
resources
unavailable) EVDO[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Requested
Abis resources
unavailable)[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Radio
interface abnormal)
[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Success Ratio(DO
B)[%]
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Requests (DO B)
[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
434
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS Soft HO
Failures (Radio
resources
unavailable) EVDO[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Requested
Abis resources
unavailable)[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Radio
interface abnormal)
[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Issue 01 (2016-09-15)
435
PRS
Performance Report Reference
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Transfer
and
Location
Update
none
Performance
Stat of BSC
HRPD
Sessions
A13 Session
Information Query
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
Location Update
Assignment Success
Ratio[%]
none
Performance
Stat of BSC
HRPD
Sessions
([Location Update
Assignment(Location
Assignment Sent)[Times]][Location Update
Uncompletion(No Location
Complete Received)
[Times]])*{100}/[Location
Update Attempts(Location
Notification Received)
[Times]]*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Issue 01 (2016-09-15)
436
PRS
Performance Report Reference
Object Type
CBSC Carrier
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Mobility
Analysis
KPI
Intra-BS Soft HO
Success Ratio[%]
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-AN Hard HO
Success Ratio[%]
Performance
Stat of
Carrier IntraAN Hard HO
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBTS
Issue 01 (2016-09-15)
437
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Forward
High
Load of
Abis
Average Total
Bandwidth Occupied
by Forward 1x and
DO Services Shared
Abis Link [kbps]
kiloby
tes/
secon
d
BTS3606
Abis Link
Resource
Performance
Stat
Average Total
Bandwidth Occupied
by Forward DO
Service Dedicated
Abis Link [kbps]
kiloby
tes/
secon
d
BTS3606
Abis Link
Resource
Performance
Stat
Duration of Forward
1X and DO Services
Shared Abis Link
with Bandwidth
Usage 81%-90% [s]
BTS3606
Abis Link
Resource
Performance
Stat
Duration of Forward
1X and DO Services
Shared Abis Link
with Bandwidth
Usage 71%-80% [s]
BTS3606
Abis Link
Resource
Performance
Stat
Duration of Forward
1X and DO Services
Shared Abis Link
with Bandwidth
Usage 61%-70% [s]
BTS3606
Abis Link
Resource
Performance
Stat
Duration of Forward
1X and DO Services
Shared Abis Link
with Bandwidth
Usage 31%-60% [s]
BTS3606
Abis Link
Resource
Performance
Stat
Duration of Forward
1X and DO Services
Shared Abis Link
with Bandwidth
Usage 0%-30% [s]
BTS3606
Abis Link
Resource
Performance
Stat
BTS3606
Board CPU
Occupancy
Performance
Stat
438
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Duration of Forward
DO Service
Dedicated Abis Link
with Bandwidth
Usage 91%-100%
[s]
BTS3900
CDMA Abis
Link
Resource
Performance
Stat
Duration of Forward
DO Service
Dedicated Abis Link
with Bandwidth
Usage 81%-90% [s]
BTS3900
CDMA Abis
Link
Resource
Performance
Stat
Duration of Forward
DO Service
Dedicated Abis Link
with Bandwidth
Usage 71%-80% [s]
BTS3900
CDMA Abis
Link
Resource
Performance
Stat
Duration of Forward
DO Service
Dedicated Abis Link
with Bandwidth
Usage 61%-70% [s]
BTS3900
CDMA Abis
Link
Resource
Performance
Stat
Duration of Forward
DO Service
Dedicated Abis Link
with Bandwidth
Usage 31%-60% [s]
BTS3900
CDMA Abis
Link
Resource
Performance
Stat
Duration of Forward
DO Service
Dedicated Abis Link
with Bandwidth
Usage 0%-30% [s]
BTS3900
CDMA Abis
Link
Resource
Performance
Stat
439
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CSPU
CPU
Utilizatio
n
CSPU CPU
Load[%]
CSPU CPU
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
440
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Worst
Carrier
Ratio
Worst Carrier
Ratio[%]
none
CS Call
Drop
Performance
Stat
count(([Connection
Requests[Times]]>100)and((([
Successful Connection
Times[Times]]/[Connection
Requests[Times]])*{100})<0.
96)or(((([Connection
release(RF lost)[Times]]+
[Connection release(Other
causes)[Times]]+[Connection
Release (HHO Fail)[Times]])/
[Successful Connection
Times[Times]])*{100})>0.03)
)/count(1=1)*{100}
Worst
Carrier
Ratio(D
O B)
Worst Carrier
Ratio(DO B)[%]
none
CS Call
Drop
Performance
Stat
count((((([Successful
Connection Times(DO B)
[Times]]/[Connection
Requests(DO B)
[Times]])*{100})<0.96)and([
DO B Traffic Channel
Connection Duration(DO B)
[Second]]/{GP})>2.5))/
count(1=1)*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
441
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Resource
Utilizatio
n
DO Average Reverse
Channels
Occupation Ratio By
Common Channels
Per Resource
Pool[entries]
none
DO Channel
Element
Performance
Stat
DO Max Reverse
Channels
Occupation Ratio By
Common Channels
Per Resource
Pool[entries]
none
DO Channel
Element
Performance
Stat
DO Max Available
Reverse Channels
By Channels Per
Resource
Pool[entries]
none
DO Channel
Element
Performance
Stat
DO Min Available
Reverse Channels
By Channels Per
Resource
Pool[entries]
none
DO Channel
Element
Performance
Stat
DO Max Reverse
Channels Occupied
By Traffic Channels
Per Resource
Pool[entries]
none
DO Channel
Element
Performance
Stat
442
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DO Average Reverse
Channels Occupied
By Traffic Channels
Per Resource
Pool[entries]
none
DO Channel
Element
Performance
Stat
DO Max Forward
Channels Occupied
By Common
Channels Per
Resource
Pool[entries]
none
DO Channel
Element
Performance
Stat
DO Average Reverse
Channels Occupied
By Common
Channels Per
Resource
Pool[entries]
none
DO Channel
Element
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 01 (2016-09-15)
443
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Resource
Utilizatio
n
DO Average
Forward MacIndexs
Occupation Ratio By
Traffic
Channels[entries]
none
DO Channel
Element
Performance
Stat
DO Max Forward
MacIndexs
Occupation Ratio By
Traffic
Channels[entries]
none
DO Channel
Element
Performance
Stat
DO Available
Forward MacIndexs
per sector
carrier[entries]
none
DO Channel
Element
Performance
Stat
DO Max Forward
MacIndexs
Occupied By Traffic
Channels per sector
carrier[entries]
none
DO Channel
Element
Performance
Stat
DO Average
Forward MacIndexs
Occupied By Traffic
Channels Per sector
carrier[entries]
none
DO Channel
Element
Performance
Stat
DO Max Forward
MacIndexs
Occupied By
Common Channels
Per sector
carrier[entries]
none
DO Channel
Element
Performance
Stat
DO Average
Forward MacIndexs
Occupied By
Common Channels
Per sector
carrier[entries]
none
DO Channel
Element
Performance
Stat
444
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Resource
Utilizatio
n
Average Total
Bandwidth Occupied
by Forward DO
Service Dedicated
Abis Link [kbps]/
Average Total
Bandwidth Occupied
by Reverse DO
Service Dedicated
Abis Link [kbps]
none
BTS3606
Abis Link
Resource
Performance
Stat
Average Total
Bandwidth Occupied
by Forward 1x and
DO Services Shared
Abis Link [kbps]/
Average Total
Bandwidth Occupied
by Reverse 1x and
DO Services Shared
Abis Link [kbps]
none
BTS3606
Abis Link
Resource
Performance
Stat
445
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Reverse
Congesti
on of
Abis
BTS3606
Abis Link
Congestion
Performance
Stat
times
BTS3606
Abis Link
Congestion
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
446
PRS
Performance Report Reference
8.2.9.8 CBTS3606 ABTSs in Desc Order by FER of Abis Link TopN Report
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
FER of
the Abis
Link
TopN
BTS3606
Abis Link
Quality
Performance
Stat
BTS3606
Abis Link
Quality
Performance
Stat
BTS3606
Abis Link
Quality
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
447
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Interrupti
on
Duration
times
BTS3606
Abis Link
Quality
Performance
Stat
BTS3606
Abis Link
Quality
Performance
Stat
BTS3606
Abis Link
Quality
Performance
Stat
BTS3606
Abis Link
Quality
Performance
Stat
times
BTS3606
Abis Link
Quality
Performance
Stat
448
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Abis Om Link
Interrupt
Times[times]
times
BTS3606
Abis Link
Quality
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Reverse
Congesti
on of
Abis
BTS3900
CDMA Abis
Link
Congestion
Performance
Stat
449
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
times
BTS3900
CDMA Abis
Link
Congestion
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
8.2.9.11 CBTS3900 ABTSs in Desc Order by FER of Abis Link TopN Report
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
FER of
the Abis
Link
TopN
BTS3900
CDMA Abis
Link Quality
Performance
Stat
450
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BTS3900
CDMA Abis
Link Quality
Performance
Stat
BTS3900
CDMA Abis
Link Quality
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Interrupti
on
Duration
times
BTS3900
CDMA Abis
Link Quality
Performance
Stat
451
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BTS3900
CDMA Abis
Link Quality
Performance
Stat
BTS3900
CDMA Abis
Link Quality
Performance
Stat
BTS3900
CDMA Abis
Link Quality
Performance
Stat
times
BTS3900
CDMA Abis
Link Quality
Performance
Stat
Abis Om Link
Interrupt
Times[times]
times
BTS3900
CDMA Abis
Link Quality
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Issue 01 (2016-09-15)
452
PRS
Performance Report Reference
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Resource
Utilizatio
n
CSPU CPU
Load[%]
CSPU CPU
Performance
Stat
Worst Carrier
Ratio(DO B)[%]
none
CS Call
Drop
Performance
Stat
count((((([Successful
Connection Times(DO B)
[Times]]/[Connection
Requests(DO B)
[Times]])*{100})<0.96)and([
DO B Traffic Channel
Connection Duration(DO B)
[Second]]/{GP})>2.5))/
count(1=1)*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 01 (2016-09-15)
453
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Resource
Utilizatio
n
DO Average Reverse
Channels
Occupation Ratio By
Common Channels
Per Resource
Pool[entries]
none
DO Channel
Element
Performance
Stat
DO Average
Forward MacIndexs
Occupation Ratio By
Traffic
Channels[entries]
none
DO Channel
Element
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Issue 01 (2016-09-15)
454
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Forward
and
Reverse
RLP
Layer
Retransm
it
RLP
Throughput
Stat
{100}*([Octets Resent on
request of AT[Byte]]/
({1024}*[Total RLP Octets
Sent on Forward
Channels[KB]]))
RLP
Throughput
Stat
{100}*([Octets Resent on
request of AN[Byte]]/
({1024}*[RLP Octets
Received on Reverse
Channels[KB]]))
Octets
Resent
on
Request
of AN
Ratio
Octets Resent on
request of AN Ratio
Do Carrier
Performance
Mesurement
RLP Octets
Received on Reverse
Channels[KB]
kiloby
tes
Do Carrier
Performance
Mesurement
byte
Do Carrier
Performance
Mesurement
Octets Resent on
request of AN[Byte]
byte
Do Carrier
Performance
Mesurement
kiloby
tes
Do Carrier
Performance
Mesurement
Reverse
Abort[Times]
times
Do Carrier
Performance
Mesurement
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
455
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBTS
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Carrier
order by
DO
FTCH
Forward
RLP
Layer
Retransm
it Ratio
Desc
none
DO TCH
Forward
RLP
Throughput
Stat
DO FTCH Forward
RLP Layer Transmit
Throughput[byte]
none
DO TCH
Forward
RLP
Throughput
Stat
DO FTCH Forward
RLP Layer
Retransmit
Throughput[byte]
none
DO TCH
Forward
RLP
Throughput
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
456
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BSC
Connecti
on Drop
Ratio
Connection Drop
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Release
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Issue 01 (2016-09-15)
457
PRS
Performance Report Reference
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD
Session
Number
and
Subscrib
e Active
Ratio
Maximum HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Minimum HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Maximum number
of active HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Minimum number of
active HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Subscribe Active
Ratio
Performance
Stat of BSC
HRPD
Sessions
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
458
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BSC
Session
Setup
Success
Ratio
HRPD Session
Setup Success
Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
times
Performance
Stat of BSC
HRPD
Sessions
HRPD
Session
Setup
Failure
HRPD Session
attemp Failures(No
HardwareID Request
Sent) Ratio
none
Performance
Stat of BSC
HRPD
Sessions
HRPD Session
attemp Failures(No
UATIAssignment
Sent) Ratio
none
Performance
Stat of BSC
HRPD
Sessions
HRPD Session
attemp Failures(No
HardwareID
Response Received)
Ratio
none
Performance
Stat of BSC
HRPD
Sessions
HRPD Session
attemp Failures(No
UATIComplete
Received) Ratio
none
Performance
Stat of BSC
HRPD
Sessions
HRPD Session
Setup Success
Ratio[%]
Performance
Stat of
Carrier
HRPD
Sessions
Carrier
Session
Setup
Issue 01 (2016-09-15)
459
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures(No
HardwareID Request
Sent)[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures(No
UATIAssignment
Sent)[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures(No
HardwareID
Response Received)
[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures(No
UATIComplete
Received)[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Issue 01 (2016-09-15)
460
PRS
Performance Report Reference
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD
Session
Released
from AT
and AN
HRPD Session
Released from AN
times
Performance
Stat of BSC
HRPD
Sessions
HRPD Session
Released from AT
none
Performance
Stat of BSC
HRPD
Sessions
461
PRS
Performance Report Reference
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD
Session
Released
Reason
HRPD Session
Released from
AT(Normal closed)
Ratio
Performance
Stat of BSC
HRPD
Sessions
462
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AT(Protocol
negotiation error)
Ratio
Performance
Stat of BSC
HRPD
Sessions
463
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AT(Others) Ratio
Performance
Stat of BSC
HRPD
Sessions
464
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AN(Authority
failed) Ratio
Performance
Stat of BSC
HRPD
Sessions
465
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AT(Protocol error)
Ratio
Performance
Stat of BSC
HRPD
Sessions
466
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AN(Source AN
release in inter AN
handoff) Ratio
Performance
Stat of BSC
HRPD
Sessions
467
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AT(Session
configuration
failure) Ratio
Performance
Stat of BSC
HRPD
Sessions
468
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AN(MML operated)
Ratio
Performance
Stat of BSC
HRPD
Sessions
469
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AN(Others) Ratio
Performance
Stat of BSC
HRPD
Sessions
470
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AN(Configure
failed) Ratio
Performance
Stat of BSC
HRPD
Sessions
471
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AT(Protocol
configuration
failure) Ratio
Performance
Stat of BSC
HRPD
Sessions
472
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AN(Release old
session in session
setup) Ratio
Performance
Stat of BSC
HRPD
Sessions
473
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from
AN(Keep alive timer
expired) Ratio
Performance
Stat of BSC
HRPD
Sessions
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
474
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
Authenti
cation
Success
Ratio
Access
Authentication
Attempts[Times]
times
Performance
Stat of BSC
HRPD
Sessions
Access
Authentication
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
([Successful Access
Authentications[Times]]/
[Access Authentication
Attempts[Times]])*{100}
Access
Authenti
cation
Failure
Access
Authentication
Rejections Ratio
Performance
Stat of BSC
HRPD
Sessions
[Access Authentication
Rejections[Times]]/[Access
Authentications
Failure[Times]]*{100}
Access
Authentication LCP
Negotiation Failure
Ratio
Performance
Stat of BSC
HRPD
Sessions
Called Number/Call
Number
Performance
Stat of BSC
HRPD
Sessions
[Access Authentication No
Resource[Times]]/[Access
Authentications
Failure[Times]]*{100}
475
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
Authentication
Rejections(Other
causes) Ratio
Performance
Stat of BSC
HRPD
Sessions
([Access Authentication No
Resource[Times]]-[Access
Authentication
Rejections[Times]]-[Access
Authentication LCP
Negotiation Failure[Times]][Access Authentication No
Resource[Times]])/[Access
Authentications
Failure[Times]]*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Issue 01 (2016-09-15)
476
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BSC
Quick
Connecti
on Setup
Success
Ratio
Connection
Requests[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Connection Success
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Setup
([Successful Connection
Times[Times]]/[Connection
Requests[Times]])*{100}
Quick
BSC
Connecti
on Setup
Success
Ratio
Quick Connection
Requests[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick Connection
Success Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Setup
([Successful Quick
Connection Times[Times]]/
[Quick Connection
Requests[Times]])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Issue 01 (2016-09-15)
477
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Connecti
on Setup
Failure
Reason
AN-Initiated
Connection Failures
(No R-TCH
Detected)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
AN-Initiated
Connection Failures
(Call resources
allocation failure)
[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
AN-Initiated
Connection Failures
(No Traffic Channel
Complete received)
[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
AN-Initiated
Connection Failures
(Other causes)
[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick Connection
Failures (No R-TCH
detected)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick Connection
Failures (Call
resources allocation
failure)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick Connection
Failures (No Traffic
Channel Complete
received)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick Connection
Failures (Other
causes)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
478
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Carrier
with The
Worst
Connecti
on Setup
Success
Connection Success
Ratio[%]
Performance
Stat of
Carrier EVDO
Connection
Setup
([Successful Connection
Times[Times]]/[Connection
Requests[Times]])*{100}
Connection
Requests[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Setup
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Issue 01 (2016-09-15)
479
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Called
Number
in
Proportio
n to Call
Number
Connection
Requests[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Connection Setup
Duration
ms
Performance
Stat of BSC
EV-DO
Connection
Setup
[Connection
Requests[Times]]*[Connectio
n Setup Average
Duration[Millisecond]]/
[Successful Connection
Times[Times]]
The
Carrier
Order by
Connecti
on Setup
Duration
Connection Setup
Average
Duration[Millisecon
d]
ms
Performance
Stat of
Carrier EVDO
Connection
Setup
Connection
Requests[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Setup
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Issue 01 (2016-09-15)
480
PRS
Performance Report Reference
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BSC
Paging
Success
Ratio
EV-DO Paging
Attempts[Times]
times
Performance
Stat of BSC
HRPD
Sessions
EV-DO Paging
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
Called Number/Call
Number
Performance
Stat of BSC
HRPD
Sessions
[Access Authentication No
Resource[Times]]/[Access
Authentications
Failure[Times]]*{100}
Called
Number
in
Proportio
n to Call
Number
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Issue 01 (2016-09-15)
481
PRS
Performance Report Reference
Object Type
CBTS
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Carrier
order by
Main
RSSI
Desc
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
Carrier
order by
Div
RSSI
Desc
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
Carrier
order by
Differenc
e
between
Main
RSSI and
Div
RSSI
Difference Between
Main And Diversity
RSSI Average Value
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
Carrier
order by
Main
RSSI
Asc
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
Carrier
order by
Div
RSSI
Asc
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
482
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Distributi
on of
IntraBSC AT
Access
Pilot
Strength
Access Times by
Access Pilot
Strength(-0,-2) Ratio
EV-DO BSC
Cover
Performance
Stat of
Access State
483
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Access Times by
Access Pilot
Strength(-10.5,-31.5)
Ratio
EV-DO BSC
Cover
Performance
Stat of
Access State
Access Times by
Access Pilot
Strength(-2.5,-4.5)
Ratio
EV-DO BSC
Cover
Performance
Stat of
Access State
Access Times by
Access Pilot
Strength(-5,-7) Ratio
EV-DO BSC
Cover
Performance
Stat of
Access State
484
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access Times by
Access Pilot
Strength(-7.5,-10)
Ratio
EV-DO BSC
Cover
Performance
Stat of
Access State
Access Times by
Access Pilot
Strength(-10.5,-31.5)
[Times]
times
EV-DO
Carrier
Cover
Performance
Stat of
Access State
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Issue 01 (2016-09-15)
485
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BSC Soft
HO
Ratio
Soft HO Ratio
EV-DO BSC
Traffic
Performance
Stat
Carrier
order by
Soft HO
Ratio
Soft HO Ratio
EV-DO
Carrier
Traffic
Performance
Stat
DO Traffic Channel
Seizure Total time
EV-DO
Carrier
Traffic
Performance
Stat
CE Total time
EV-DO
Carrier
Traffic
Performance
Stat
486
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Carrier
order by
Soft HO
Ratio
Asc
Soft HO Ratio
EV-DO
Carrier
Traffic
Performance
Stat
DO Traffic Channel
Seizure Total time
EV-DO
Carrier
Traffic
Performance
Stat
CE Total time
EV-DO
Carrier
Traffic
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Issue 01 (2016-09-15)
487
PRS
Performance Report Reference
Object Type
CBTS
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Carrier
order by
Forward
Through
put Desc
DO FTCH Forward
RLP Layer Transmit
Throughput[byte]
none
DO TCH
Forward
RLP
Throughput
Stat
DO FTCH Forward
RLP Layer
Retransmit
Throughput[byte]
none
DO TCH
Forward
RLP
Throughput
Stat
DO FTCH Forward
RLP Layer Transmit
Throughput[byte]
none
DO TCH
Forward
RLP
Throughput
Stat
DO FTCH Forward
RLP Layer
Retransmit
Throughput[byte]
none
DO TCH
Forward
RLP
Throughput
Stat
Carrier
order by
Forward
Through
put Asc
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Issue 01 (2016-09-15)
488
PRS
Performance Report Reference
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
Trend
DO Traffic Channel
Connection Strength
Erl
EV-DO BSC
Traffic
Performance
Stat
DO Traffic Channel
CE Strength
Erl
EV-DO BSC
Traffic
Performance
Stat
DO Traffic Channel
MacIndex Strength
Erl
EV-DO BSC
Traffic
Performance
Stat
DO Traffic Channel
Connection Strength
Erl
EV-DO
Carrier
Traffic
Performance
Stat
DO Traffic Channel
Connection Total
time
EV-DO
Carrier
Traffic
Performance
Stat
DO Traffic Channel
CE Strength
Erl
EV-DO
Carrier
Traffic
Performance
Stat
DO Traffic Channel
MacIndex Strength
Erl
EV-DO
Carrier
Traffic
Performance
Stat
Carrier
Order by
TCH
Traffic
Desc
Issue 01 (2016-09-15)
489
PRS
Performance Report Reference
Subrep
ort
Name
Carrier
Order by
TCH
Traffic
Asc
Counter
Coun
ter
Unit
Function
Subset
Formula
Max Active
Connectors of
Carrier[Entries]
numb
er
Performance
Stat of
Carrier EVDO
Connection
Release
DO Traffic Channel
Connection Strength
Erl
EV-DO
Carrier
Traffic
Performance
Stat
DO Traffic Channel
Connection Total
time
EV-DO
Carrier
Traffic
Performance
Stat
DO Traffic Channel
CE Strength
Erl
EV-DO
Carrier
Traffic
Performance
Stat
DO Traffic Channel
MacIndex Strength
Erl
EV-DO
Carrier
Traffic
Performance
Stat
Max Active
Connectors of
Carrier[Entries]
numb
er
Performance
Stat of
Carrier EVDO
Connection
Release
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
490
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBTS
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Carrier
Order by
EVDO
CCH
Load
Desc
DO CCH Average
Packet Occupancy
DO CCH
Using Ratio
Performance
Stat
DO CCH Average
Synchronous Packet
Occupancy Ratio[%]
none
DO CCH
Using Ratio
Performance
Stat
DO CCH Average
Asynchronous
Packet Occupancy
Ratio[%]
none
DO CCH
Using Ratio
Performance
Stat
DO CCH Average
Sub-Synchronous
Packet Occupancy
Ratio[%]
none
DO CCH
Using Ratio
Performance
Stat
DO CCH Discarded
Sync Message
Ratio[%]
none
DO CCH
Discard
Performance
Stat
DO CCH Discarded
Asynchronous
Message Ratio[%]
none
DO CCH
Discard
Performance
Stat
491
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Carrier
Order by
ACH
Channel
Load
Desc
none
ACH
Performance
Stat
none
ACH
Performance
Stat
none
ACH
Performance
Stat
ACH Average
Collision Ratio[%]
none
ACH
Performance
Stat
none
ACH
Performance
Stat
none
ACH
Performance
Stat
DO TCH Average
ROT[1/8db]
none
DO TCH
Load
Performance
Stat
DO TCH Maximum
ROT[1/8db]
none
DO TCH
Load
Performance
Stat
DO TCH Minimum
ROT[1/8db]
none
DO TCH
Load
Performance
Stat
DO TCH Reverse
Load[1/8db]
none
DO TCH
Load
Performance
Stat
Carrier
Order by
TCH
Reverse
Load
Desc
Issue 01 (2016-09-15)
492
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BSC
Forward
and
Reverse
RLP
Layer
Through
put
Trend
Forward Octets
Between PCF and
BSC[KB]
kiloby
tes
RLP
Throughput
Stat
RLP Octets
Received on Reverse
Channels[KB]
kiloby
tes
RLP
Throughput
Stat
Carrier
Order by
Reverse
Through
put Asc
RLP Octets
Received on Reverse
Channels[KB]
kiloby
tes
Do Carrier
Performance
Mesurement
byte
Do Carrier
Performance
Mesurement
Octets Resent on
request of AN[Byte]
byte
Do Carrier
Performance
Mesurement
493
PRS
Performance Report Reference
Subrep
ort
Name
Carrier
Order by
Reverse
Through
put Desc
Counter
Coun
ter
Unit
Function
Subset
Formula
kiloby
tes
Do Carrier
Performance
Mesurement
Reverse
Abort[Times]
times
Do Carrier
Performance
Mesurement
RLP Octets
Received on Reverse
Channels[KB]
kiloby
tes
Do Carrier
Performance
Mesurement
byte
Do Carrier
Performance
Mesurement
Octets Resent on
request of AN[Byte]
byte
Do Carrier
Performance
Mesurement
kiloby
tes
Do Carrier
Performance
Mesurement
Reverse
Abort[Times]
times
Do Carrier
Performance
Mesurement
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Issue 01 (2016-09-15)
494
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
EVDO
Inter-AN
Incoming
Hard HO
and Hard
HO
Success
Ratio
Trend
Successful Inter-AN
Incoming Hard HOs
Ratio
Performance
Stat of InterAN Hard HO
[Successful Inter-AN
Incoming Hard HOs[Times]]/
[Inter-AN Incoming Hard HO
Requests[Times]]*{100}
Successful Inter-AN
Hard HOs Ratio
Performance
Stat of InterAN Hard HO
Inter-AN
Hard HO
Failure
Inter-AN Hard HO
Failures (Radio
resources
unavailable) Ratio
Performance
Stat of InterAN Hard HO
Inter-AN Hard HO
Failures (Requested
terrestrial resources
unavailable) Ratio
Performance
Stat of InterAN Hard HO
Inter-AN Hard HO
Failures (MS Not
detected by
destination pilot)
Ratio
Performance
Stat of InterAN Hard HO
Inter-AN Hard HO
Failures (Other
causes) Ratio
Performance
Stat of InterAN Hard HO
495
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-AN
Incoming
Hard HO
Failure
Inter-AN Incoming
Hard HOs Failures
(Resource
Allocation Failed)
Ratio
Performance
Stat of InterAN Hard HO
Inter-AN Incoming
Hard HOs Failures
(HO Execution
Failed) Ratio
Performance
Stat of InterAN Hard HO
Inter-AN Incoming
Hard HOs Failures
(Other causes) Ratio
Performance
Stat of InterAN Hard HO
Inter-AN Incoming
Hard HO
Requests[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Successful Inter-AN
Incoming Hard HOs
Ratio
Performance
Stat of
Carrier InterAN Hard HO
[Successful Inter-AN
Incoming Hard HOs[Times]]/
[Inter-AN Incoming Hard HO
Requests[Times]]*{100}
Inter-AN Incoming
Hard HOs Failures
(Resource
Allocation Failed)
[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Incoming
Hard HOs Failures
(HO Execution
Failed)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Incoming
Hard HOs Failures
(Other causes)
[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Carrier
Order by
Inter-AN
Incoming
Hard HO
Issue 01 (2016-09-15)
496
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Carrier
Order by
Inter-AN
Hard HO
Inter-AN Hard HO
Requests[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Successful Inter-AN
Hard HOs Ratio
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Hard HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Hard HO
Failures (Requested
terrestrial resources
unavailable)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Hard HO
Failures (MS Not
detected by
destination pilot)
[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Hard HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Issue 01 (2016-09-15)
497
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-AN
Hard HO
and
Success
Ratio
Trend
Intra-AN Hard HO
Requests[Times]
times
Performance
Stat of IntraAN Hard HO
Intra-AN Hard HO
Success Ratio[%]
Performance
Stat of IntraAN Hard HO
Intra-AN
Hard HO
Failure
Reason
Intra-AN Hard HO
Failures (MS Not
detected by
destination pilot)
Ratio
Performance
Stat of IntraAN Hard HO
Intra-AN Hard HO
Failures (Other
causes) Ratio
Performance
Stat of IntraAN Hard HO
Intra-AN Hard HO
Failures (Radio
resources
unavailable) Ratio
Performance
Stat of IntraAN Hard HO
Intra-AN Hard HO
Failures (Requested
terrestrial resources
unavailable) Ratio
Performance
Stat of IntraAN Hard HO
498
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Carrier
whth the
Worst
Intra-AN
Hard HO
Intra-AN Hard HO
Requests[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Success Ratio[%]
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Failures (Requested
terrestrial resources
unavailable)[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Failures (MS Not
detected by
destination pilot)
[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Issue 01 (2016-09-15)
499
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-BS
SHO
Success
Ratio
Inter-BS Soft HO
Failures (Radio
resources
unavailable) EVDO[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Failures (Requested
Abis resources
unavailable) EVDO[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Failures (Radio
interface abnormal)
EV-DO[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Failures (MS
rejected) EVDO[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Failures (A17/A18
link setup failed)
EV-DO[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
500
PRS
Performance Report Reference
Subrep
ort
Name
Inter-BS
SHO
Failures
Causes
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-BS Soft HO
Failures (Other
causes) EVDO[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Requests
Times[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
InterBS Soft HO
Success Ratio[%]
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Issue 01 (2016-09-15)
501
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS
Soft HO
requests
and
Success
Ratio
Trend
Intra-BS Soft HO
Requests[Times]
times
Intra-BSC
Soft HO
Performance
Stat
Intra-BS Soft HO
Success Ratio[%]
Intra-BSC
Soft HO
Performance
Stat
Distributi
on of
Intra-BS
Soft HO
Failure
Intra-BS Soft HO
Failures (Other
causes) Ratio
Intra-BSC
Soft HO
Performance
Stat
Inter-BS Soft HO
Failures (Radio
resources
unavailable) Ratio
Intra-BSC
Soft HO
Performance
Stat
Intra-BS Soft HO
Failures (Radio
interface abnormal)
Ratio
Intra-BSC
Soft HO
Performance
Stat
Intra-BS Soft HO
Failures (Requested
Abis resources
unavailable) Ratio
Intra-BSC
Soft HO
Performance
Stat
Intra-BS Soft HO
requests EVDO[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Carrier
Order by
Intra-BS
Soft HO
Success
Ratio
Issue 01 (2016-09-15)
502
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS Soft HO
Success Ratio[%]
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Radio
resources
unavailable) EVDO[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Requested
Abis resources
unavailable)[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Radio
interface abnormal)
[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
503
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD
Session
Transfer
and
Location
Update
none
Performance
Stat of BSC
HRPD
Sessions
A13 Session
Information Query
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
Location Update
Assignment Success
Ratio
Performance
Stat of BSC
HRPD
Sessions
([Location Update
Assignment(Location
Assignment Sent)[Times]][Location Update
Uncompletion(No Location
Complete Received)[Times]])/
[Location Update
Attempts(Location
Notification Received)
[Times]]*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
504
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBTS
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DO
Reverse
Resource
Usage
Ratio
Sort
DO Min Reverse
CEs Occupied By
Service Channels
Ratio
BTS3606
DO Channel
Element
Performance
Stat
DO Max Reverse
CEs Occupied By
Service Channels
Ratio
BTS3606
DO Channel
Element
Performance
Stat
DO Max Available
Reverse CEs[entries]
none
BTS3606
DO Channel
Element
Performance
Stat
DO Min Available
Reverse CEs[entries]
none
BTS3606
DO Channel
Element
Performance
Stat
DO Max Reverse
CEs Occupied By
Traffic
Channels[entries]
none
BTS3606
DO Channel
Element
Performance
Stat
505
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DO Min Reverse
CEs Occupied By
Traffic
Channels[entries]
none
BTS3606
DO Channel
Element
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBTS
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DO CE
Reverse
Resource
Usage
Ratio
Sort
DO Min Reverse
CEs Occupied By
Service Channels
Ratio
BTS3612
DO Channel
Element
Performance
Stat
DO Max Reverse
CEs Occupied By
Service Channels
Ratio
BTS3612
DO Channel
Element
Performance
Stat
506
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DO Min Available
Reverse CEs[entries]
none
BTS3612
DO Channel
Element
Performance
Stat
DO Max Available
Reverse CEs[entries]
none
BTS3612
DO Channel
Element
Performance
Stat
DO Min Reverse
CEs Occupied By
Service
Channels[entries]
none
BTS3612
DO Channel
Element
Performance
Stat
DO Max Reverse
CEs Occupied By
Service
Channels[entries]
none
BTS3612
DO Channel
Element
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Issue 01 (2016-09-15)
507
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD
Session
Performa
nce
HRPD Session
Setup Success
Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
Maximum HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Maximum number
of active HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Connection Success
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Setup
([Successful Connection
Times[Times]]/[Connection
Requests[Times]])*{100}
EV-DO Paging
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
Connection Drop
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Release
Traffic Drop
Ratio[Minute]
none
Performance
Stat of BSC
EV-DO
Connection
Release
Intra-BS Soft HO
Success Ratio[%]
Intra-BSC
Soft HO
Performance
Stat
Accessab
lity
Call
Retainabi
lity
Mobility
Issue 01 (2016-09-15)
508
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Service
Integrity
RLP
Throughput
Stat
{100}*([Octets Resent on
request of AT[Byte]]/
({1024}*[Total RLP Octets
Sent on Forward
Channels[KB]]))
RLP
Throughput
Stat
{100}*([Octets Resent on
request of AN[Byte]]/
({1024}*[RLP Octets
Received on Reverse
Channels[KB]]))
Forward RLP
Throughput[kbps]
kiloby
tes/
secon
d
Performance
Stat of EVDO Service
Data
Throughput
Reverse RLP
Throughput[kbps]
kbit/s
RLP
Throughput
Stat
Traffic Density on
TCH[Erl]
Erl
EV-DO BSC
Traffic
Performance
Stat
CS With PS(Not
Including HO)
Erl
Carrier
Traffic
Performance
Stat(FCH)
Soft HO Ratio
EV-DO
Carrier
Traffic
Performance
Stat
Network
Capabilit
y
Network
Coverage
Issue 01 (2016-09-15)
509
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Resource
Usage
Ratio
CS With
PS(Including Soft
HO)
Erl
Carrier
Traffic
Performance
Stat(FCH)
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD
Session
Performa
nce KPI
Group
HRPD Session
Setup Success
Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
HRPD Session
Setup Average
Time[Millisecond]
ms
Performance
Stat of
Carrier
HRPD
Sessions
510
PRS
Performance Report Reference
Subrep
ort
Name
Accessab
lity KPI
Group
Call
Retainabi
lity KPI
Group
Mobility
KPI
Group
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Maximum number
of active HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Maximum HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Access
Authentication
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
([Successful Access
Authentications[Times]]/
[Access Authentication
Attempts[Times]])*{100}
EV-DO Paging
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
Connection Success
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Setup
([Successful Connection
Times[Times]]/[Connection
Requests[Times]])*{100}
Connection Drop
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Release
Traffic Drop
Ratio[Minute]
none
Performance
Stat of BSC
EV-DO
Connection
Release
Intra-AN Hard HO
Success Ratio[%]
Performance
Stat of IntraAN Hard HO
511
PRS
Performance Report Reference
Subrep
ort
Name
Service
Integrity
KPI
Group
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-subnet
Dormant HO
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
Successful Inter-AN
Incoming Hard HOs
Ratio[%]
Performance
Stat of InterAN Hard HO
([Successful Inter-AN
Incoming Hard HOs[Times]]/
[Inter-AN Incoming Hard HO
Requests[Times]])*{100}
Successful Inter-AN
Hard HOs Ratio[%]
Performance
Stat of InterAN Hard HO
Location Update
Assignment Success
Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
(([Location Update
Attempts(Location
Notification Received)
[Times]]-[Location Update
Uncompletion(No Location
Complete Received)[Times]])/
[Location Update
Attempts(Location
Notification Received)
[Times]])*{100}
Intra-AN Soft HO
Success Ratio[%]
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
RLP
Throughput
Stat
{100}*([Octets Resent on
request of AT[Byte]]/
({1024}*[Total RLP Octets
Sent on Forward
Channels[KB]]))
RLP
Throughput
Stat
{100}*([Octets Resent on
request of AN[Byte]]/
({1024}*[RLP Octets
Received on Reverse
Channels[KB]]))
512
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Capabilit
y KPI
Group
Traffic Density on
TCH[Erl]
Erl
EV-DO BSC
Traffic
Performance
Stat
CS With PS(Not
Including HO)
Erl
Carrier
Traffic
Performance
Stat(FCH)
Coverage
KPI
Group
Soft HO Ratio
EV-DO
Carrier
Traffic
Performance
Stat
Resource
Usage
Ratio
CS With
PS(Including Soft
HO)
Erl
Carrier
Traffic
Performance
Stat(FCH)
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
513
PRS
Performance Report Reference
Issue 01 (2016-09-15)
514
PRS
Performance Report Reference
NE Type
CHLR
Object Type
CHLR
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CHLR
Number of HDB
Directives for
Traffic Control
Started
times
Internal
Interface
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
515
PRS
Performance Report Reference
10
Issue 01 (2016-09-15)
516
PRS
Performance Report Reference
NE Type
CMSC
Object Type
CMSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CMSC
Broadcast Short
Message First
Paging
times
Broadcast
Paging
Measuremen
t
Broadcast Paging
No Response
times
Broadcast
Paging
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
517
PRS
Performance Report Reference
11
Issue 01 (2016-09-15)
518
PRS
Performance Report Reference
NE Type
GGSN
Object Type
UGW and GGSN
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
AAA
performa
nce
Authentication
requests
times
AAA
performance
measurement
Authentication
successful ratio
AAA
performance
measurement
{100}*[Successful
authentication requests]/
[Authentication requests]
Accounting start
requests
times
AAA
performance
measurement
Accounting start
successful ratio
AAA
performance
measurement
{100}*[Successful accounting
start requests]/[Accounting
start requests]
Accounting stop
requests
times
AAA
performance
measurement
Accounting stop
successful ratio
AAA
performance
measurement
{100}*[Successful accounting
stop requests]/[Accounting
stop requests]
Real-time
accounting requests
times
AAA
performance
measurement
Real time
accounting ratio
AAA
performance
measurement
{100}*[Successful real-time
accounting requests]/[Realtime accounting requests]
519
PRS
Performance Report Reference
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
APN
AAA
Performa
nce
Authentication
requests
times
AAA
performance
measurement
(specified
APN)
Authentication
request success ratio
AAA
performance
measurement
(specified
APN)
{100}*[Successful
authentication requests]/
[Authentication requests]
Accounting start
requests
times
AAA
performance
measurement
(specified
APN)
Accounting request
success ratio
AAA
performance
measurement
(specified
APN)
{100}*[Successful accounting
start requests]/[Accounting
start requests]
Accounting stop
requests
times
AAA
performance
measurement
(specified
APN)
Accounting stop
success ratio
AAA
performance
measurement
(specified
APN)
{100}*[Successful accounting
stop requests]/[Accounting
stop requests]
Real-time
accounting requests
times
AAA
performance
measurement
(specified
APN)
Real time
accounting request
success ratio
AAA
performance
measurement
(specified
APN)
{100}*[Successful real-time
accounting requests]/[Realtime accounting requests]
520
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
GGSN
Object Type
UGW and GGSN
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Basic
session
service
PDP context
activation requests
times
GGSN Basic
session
performance
measurement
GGSN Basic
session
performance
measurement
{100}*[Successful PDP
context activations]/[PDP
context activation requests]
Current activated
PDP contexts
numb
er
GGSN Basic
session
performance
measurement
GTPv1 MS-init.
activation requests
times
GTPv1
session
measurement
(specified
APN)
Apn
session
performa
nce
Issue 01 (2016-09-15)
521
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
GTPv1
session
measurement
(specified
APN)
{100}*[Successful GTPv1
MS-init. activations]/[GTPv1
MS-init. activation requests]
GTPv0 MS-init.
activation requests
times
GTPv0
session
measurement
(specified
APN)
GTPv0
session
measurement
(specified
APN)
{100}*[Successful GTPv0
MS-init. activations]/[GTPv0
MS-init. activation requests]
Current activated
PDP contexts (APN)
numb
er
Session
status
measurement
(specified
APN)
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
GGSN
Object Type
UGW and GGSN
Issue 01 (2016-09-15)
522
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Data
transfer
measure
ment
Gn peak throughput
in MB/s
mb/
secon
d
GGSN
Forwarding
performance
measurement
Gi peak throughput
in MB/s
mb/
secon
d
GGSN
Forwarding
performance
measurement
Gn uplink traffic in
MB
MB
GGSN
Forwarding
performance
measurement
Gn downlink traffic
in MB
MB
GGSN
Forwarding
performance
measurement
Gi uplink traffic in
MB
MB
GGSN
Forwarding
performance
measurement
Gi downlink traffic
in MB
MB
GGSN
Forwarding
performance
measurement
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
523
PRS
Performance Report Reference
NE Type
GGSN
Object Type
Board
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
System
Resource
Measure
ment
System
resources
performance
measuremen
t(BOARD)
System
resources
performance
measuremen
t(BOARD)
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
524
PRS
Performance Report Reference
12
Issue 01 (2016-09-15)
525
PRS
Performance Report Reference
NE Type
HLR
Object Type
HLR Function
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HLR
Function
2G OCSI
Subscribers
entrie
s
2G CAMEL
Subscriber
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
526
PRS
Performance Report Reference
13
Issue 01 (2016-09-15)
527
PRS
Performance Report Reference
NE Type
LTE
Object Type
LTE Cell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accessib
ility
RRC Connection
Setup Success Rate
(service)
none
Measuremen
t related to
RRC setup
([L.RRC.ConnReq.Succ.Emc]
+
[L.RRC.ConnReq.Succ.HighP
ri]+
[L.RRC.ConnReq.Succ.Mt]+
[L.RRC.ConnReq.Succ.MoDa
ta])/
([L.RRC.ConnReq.Att.Emc]+
[L.RRC.ConnReq.Att.HighPri
]+[L.RRC.ConnReq.Att.Mt]+
[L.RRC.ConnReq.Att.MoData
])*{100}
RRC Connection
Setup Success Rate
(other)[%]
none
Measuremen
t related to
RRC setup
([L.RRC.ConnReq.Succ.MoSi
g])/
([L.RRC.ConnReq.Att.MoSig
])*{100}
E-RAB Setup
Success Rate (VoIP)
none
Measuremen
t related to
E-RAB
establish
([L.E-RAB.SuccEst.QCI.1])/
([L.E-RAB.AttEst.QCI.
1])*{100}
528
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
E-RAB Setup
Success Rate (All)
none
Measuremen
t related to
E-RAB
establish
([L.E-RAB.SuccEst.QCI.1]+
[L.E-RAB.SuccEst.QCI.2]+
[L.E-RAB.SuccEst.QCI.3]+
[L.E-RAB.SuccEst.QCI.4]+
[L.E-RAB.SuccEst.QCI.5]+
[L.E-RAB.SuccEst.QCI.6]+
[L.E-RAB.SuccEst.QCI.7]+
[L.E-RAB.SuccEst.QCI.8]+
[L.E-RAB.SuccEst.QCI.9])/
([L.E-RAB.AttEst.QCI.1]+
[L.E-RAB.AttEst.QCI.2]+
[L.E-RAB.AttEst.QCI.3]+
[L.E-RAB.AttEst.QCI.4]+
[L.E-RAB.AttEst.QCI.5]+
[L.E-RAB.AttEst.QCI.6]+
[L.E-RAB.AttEst.QCI.7]+
[L.E-RAB.AttEst.QCI.8]+
[L.E-RAB.AttEst.QCI.
9])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
LTE
Object Type
LTE Cell
Issue 01 (2016-09-15)
529
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Integrity
DL Average
Throughput of QCI
1
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.1]/
[L.Thrp.Time.DL.QCI.1]
DL Average
Throughput of QCI
2
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.2]/
[L.Thrp.Time.DL.QCI.2]
DL Average
Throughput of QCI
3
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.3]/
[L.Thrp.Time.DL.QCI.3]
DL Average
Throughput of QCI
4
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.4]/
[L.Thrp.Time.DL.QCI.4]
DL Average
Throughput of QCI
5
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.5]/
[L.Thrp.Time.DL.QCI.5]
DL Average
Throughput of QCI
6
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.6]/
[L.Thrp.Time.DL.QCI.6]
DL Average
Throughput of QCI
7
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.7]/
[L.Thrp.Time.DL.QCI.7]
DL Average
Throughput of QCI
8
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.8]/
[L.Thrp.Time.DL.QCI.8]
DL Average
Throughput of QCI
9
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.9]/
[L.Thrp.Time.DL.QCI.9]
UL Average
Throughput of QCI
1
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.1]/
[L.Thrp.Time.UL.QCI.1]
UL Average
Throughput of QCI
2
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.2]/
[L.Thrp.Time.UL.QCI.2]
UL Average
Throughput of QCI
3
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.3]/
[L.Thrp.Time.UL.QCI.3]
UL Average
Throughput of QCI
4
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.4]/
[L.Thrp.Time.UL.QCI.4]
530
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
UL Average
Throughput of QCI
5
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.5]/
[L.Thrp.Time.UL.QCI.5]
UL Average
Throughput of QCI
6
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.6]/
[L.Thrp.Time.UL.QCI.6]
UL Average
Throughput of QCI
7
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.7]/
[L.Thrp.Time.UL.QCI.7]
UL Average
Throughput of QCI
8
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.8]/
[L.Thrp.Time.UL.QCI.8]
UL Average
Throughput of QCI
9
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.9]/
[L.Thrp.Time.UL.QCI.9]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
LTE
Object Type
LTE Cell
Issue 01 (2016-09-15)
531
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accesaib
ility
RRC Connection
Setup Success Rate
(service)
none
Measuremen
t related to
RRC setup
([L.RRC.ConnReq.Succ.Emc]
+
[L.RRC.ConnReq.Succ.HighP
ri]+
[L.RRC.ConnReq.Succ.Mt]+
[L.RRC.ConnReq.Succ.MoDa
ta])/
([L.RRC.ConnReq.Att.Emc]+
[L.RRC.ConnReq.Att.HighPri
]+[L.RRC.ConnReq.Att.Mt]+
[L.RRC.ConnReq.Att.MoData
])*{100}
RRC Connection
Setup Success Rate
(other)[%]
none
Measuremen
t related to
RRC setup
([L.RRC.ConnReq.Succ.MoSi
g])/
([L.RRC.ConnReq.Att.MoSig
])*{100}
E-RAB Setup
Success Rate (VoIP)
[%]
none
Measuremen
t related to
E-RAB
establish
([L.E-RAB.SuccEst.QCI.1]/
[L.E-RAB.AttEst.QCI.
1])*{100}
E-RAB Setup
Success Rate (ALL)
[%]
none
Measuremen
t related to
E-RAB
establish
([L.E-RAB.SuccEst]/[L.ERAB.AttEst])*{100}
none
Measuremen
t related to
RRC setup
(([L.RRC.ConnReq.Succ.Emc
]+
[L.RRC.ConnReq.Succ.HighP
ri]+
[L.RRC.ConnReq.Succ.Mt]+
[L.RRC.ConnReq.Succ.MoDa
ta])/
([L.RRC.ConnReq.Att.Emc]+
[L.RRC.ConnReq.Att.HighPri
]+[L.RRC.ConnReq.Att.Mt]+
[L.RRC.ConnReq.Att.MoData
])*{100})*(([L.ERAB.SuccEst.QCI.1]/[L.ERAB.AttEst.QCI.1])*{100})/
{100}
532
PRS
Performance Report Reference
Subrep
ort
Name
Retainabi
lity
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Service Setup
Success Rate(ALL)
[%]
none
Measuremen
t related to
RRC setup
(([L.RRC.ConnReq.Succ.Emc
]+
[L.RRC.ConnReq.Succ.HighP
ri]+
[L.RRC.ConnReq.Succ.Mt]+
[L.RRC.ConnReq.Succ.MoDa
ta])/
([L.RRC.ConnReq.Att.Emc]+
[L.RRC.ConnReq.Att.HighPri
]+[L.RRC.ConnReq.Att.Mt]+
[L.RRC.ConnReq.Att.MoData
])*{100})*(([L.ERAB.SuccEst]/[L.ERAB.AttEst])*{100})/{100}
none
Measuremen
t related to
E-RAB
release
([L.E-RAB.AbnormRel.QCI.
1]/([L.E-RAB.NormRel.QCI.
1]+[L.ERAB.AbnormRel.QCI.
1]))*{100}
none
Measuremen
t related to
E-RAB
release
([L.E-RAB.AbnormRel]/[L.ERAB.NormRel])*{100}
Call Complete
Success Rate(VoIP)
[%]
none
Measuremen
t related to
RRC setup
(([L.RRC.ConnReq.Succ.Emc
]+
[L.RRC.ConnReq.Succ.HighP
ri]+
[L.RRC.ConnReq.Succ.Mt]+
[L.RRC.ConnReq.Succ.MoDa
ta])/
([L.RRC.ConnReq.Att.Emc]+
[L.RRC.ConnReq.Att.HighPri
]+[L.RRC.ConnReq.Att.Mt]+
[L.RRC.ConnReq.Att.MoData
])*{100})*(([L.ERAB.SuccEst.QCI.1]/[L.ERAB.AttEst.QCI.
1])*{100})*(([L.ERAB.AbnormRel.QCI.1]/
([L.E-RAB.NormRel.QCI.1]+
[L.E-RAB.AbnormRel.QCI.
1]))*{100})/{10000}
533
PRS
Performance Report Reference
Subrep
ort
Name
Mobility
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Call Complete
Success Rate(ALL)
[%]
none
Measuremen
t related to
RRC setup
(([L.RRC.ConnReq.Succ.Emc
]+
[L.RRC.ConnReq.Succ.HighP
ri]+
[L.RRC.ConnReq.Succ.Mt]+
[L.RRC.ConnReq.Succ.MoDa
ta])/
([L.RRC.ConnReq.Att.Emc]+
[L.RRC.ConnReq.Att.HighPri
]+[L.RRC.ConnReq.Att.Mt]+
[L.RRC.ConnReq.Att.MoData
])*{100})*(([L.ERAB.SuccEst]/[L.ERAB.AttEst])*{100})*(([L.ERAB.AbnormRel]/[L.ERAB.NormRel])*{100})/
{10000}
Intra-frequency
Handover Out
Success Rate[%]
none
Measuremen
t related to
Intra eRan
HOOUT
(([L.HHO.IntraeNB.IntraFreq.
ExecSuccOut]+
[L.HHO.IntereNB.IntraFreq.E
xecSuccOut])/
([L.HHO.IntraeNB.IntraFreq.
ExecAttOut]+
[L.HHO.IntereNB.IntraFreq.E
xecAttOut]))*{100}
Inter-frequency
Handover Out
Success Rate[%]
none
Measuremen
t related to
Intra eRan
HOOUT
(([L.HHO.IntraeNB.InterFreq.
ExecSuccOut]+
[L.HHO.IntereNB.InterFreq.E
xecSuccOut])/
([L.HHO.IntraeNB.InterFreq.
ExecAttOut]+
[L.HHO.IntereNB.InterFreq.E
xecAttOut]))*{100}
Inter-RAT Handover
Out Success Rate
(LTE to CDMA)
none
Measuremen
t related to
IRATHOOU
T
([L.IRATHO.E2C.ExecSuccO
ut]/
[L.IRATHO.E2C.PrepAttOut]
)*{100}
Inter-RAT Handover
Out Success Rate
(LTE to WCDMA)
none
Measuremen
t related to
IRATHOOU
T
([L.IRATHO.E2W.ExecSuccO
ut]/
[L.IRATHO.E2W.PrepAttOut]
)*{100}
Inter-RAT Handover
Out Success Rate
(LTE to GERAN)
none
Measuremen
t related to
IRATHOOU
T
([L.IRATHO.E2G.ExecSuccO
ut]/
[L.IRATHO.E2G.PrepAttOut]
)*{100}
534
PRS
Performance Report Reference
Subrep
ort
Name
Service
integrity
Availabil
ity
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-RAT Handover
Out Success Rate
(LTE to GERAN)
none
Measuremen
t related to
IRATHOOU
T
([L.IRATHO.E2T.ExecSuccO
ut]/
[L.IRATHO.E2T.PrepAttOut]
)*{100}
UL Average
Throughput(Kbps)
none
Measuremen
t related to
Thruput
([L.Thrp.bits.UL.QCI.1]+
[L.Thrp.bits.UL.QCI.2]+
[L.Thrp.bits.UL.QCI.3]+
[L.Thrp.bits.UL.QCI.4]+
[L.Thrp.bits.UL.QCI.5]+
[L.Thrp.bits.UL.QCI.6]+
[L.Thrp.bits.UL.QCI.7]+
[L.Thrp.bits.UL.QCI.8]+
[L.Thrp.bits.UL.QCI.9])/
([L.Thrp.Time.UL.QCI.1]+
[L.Thrp.Time.UL.QCI.2]+
[L.Thrp.Time.UL.QCI.3]+
[L.Thrp.Time.UL.QCI.4]+
[L.Thrp.Time.UL.QCI.5]+
[L.Thrp.Time.UL.QCI.6]+
[L.Thrp.Time.UL.QCI.7]+
[L.Thrp.Time.UL.QCI.8]+
[L.Thrp.Time.UL.QCI.9])
DL Average
Throughput(Kbps)
none
Measuremen
t related to
Thruput
([L.Thrp.bits.DL.QCI.1]+
[L.Thrp.bits.DL.QCI.2]+
[L.Thrp.bits.DL.QCI.3]+
[L.Thrp.bits.DL.QCI.4]+
[L.Thrp.bits.DL.QCI.5]+
[L.Thrp.bits.DL.QCI.6]+
[L.Thrp.bits.DL.QCI.7]+
[L.Thrp.bits.DL.QCI.8]+
[L.Thrp.bits.DL.QCI.9])/
([L.Thrp.Time.DL.QCI.1]+
[L.Thrp.Time.DL.QCI.2]+
[L.Thrp.Time.DL.QCI.3]+
[L.Thrp.Time.DL.QCI.4]+
[L.Thrp.Time.DL.QCI.5]+
[L.Thrp.Time.DL.QCI.6]+
[L.Thrp.Time.DL.QCI.7]+
[L.Thrp.Time.DL.QCI.8]+
[L.Thrp.Time.DL.QCI.9])
Wireless Network
Unavailable Rate
none
Measuremen
t related to
Cell
Algorithm
([L.Cell.Unavail.Dur.Sys]+
[L.Cell.Unavail.Dur.Manual])/
{GP}*{60}
535
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
UL Trafic
Volume(Mbps)
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.1]+
[L.Thrp.bits.UL.QCI.2]+
[L.Thrp.bits.UL.QCI.3]+
[L.Thrp.bits.UL.QCI.4]+
[L.Thrp.bits.UL.QCI.5]+
[L.Thrp.bits.UL.QCI.6]+
[L.Thrp.bits.UL.QCI.7]+
[L.Thrp.bits.UL.QCI.8]+
[L.Thrp.bits.UL.QCI.9]
DL Trafic
Volume(Mbps)
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.1]+
[L.Thrp.bits.DL.QCI.2]+
[L.Thrp.bits.DL.QCI.3]+
[L.Thrp.bits.DL.QCI.4]+
[L.Thrp.bits.DL.QCI.5]+
[L.Thrp.bits.DL.QCI.6]+
[L.Thrp.bits.DL.QCI.7]+
[L.Thrp.bits.DL.QCI.8]+
[L.Thrp.bits.DL.QCI.9]
L.Traffic.User.Avg
none
Measuremen
t related to
the number
of User
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
LTE
Object Type
LTE Cell
Issue 01 (2016-09-15)
536
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Mobility
Intra-frequency
Handover Out
Success Rate
none
Measuremen
t related to
Intra eRan
HOOUT
([L.HHO.IntraeNB.IntraFreq.
ExecSuccOut]+
[L.HHO.IntereNB.IntraFreq.E
xecSuccOut])/
([L.HHO.IntraeNB.IntraFreq.
ExecAttOut]+
[L.HHO.IntereNB.IntraFreq.E
xecAttOut])*{100}
Inter-frequency
Handover Out
Success Rate
none
Measuremen
t related to
Intra eRan
HOOUT
([L.HHO.IntraeNB.InterFreq.
ExecSuccOut]+
[L.HHO.IntereNB.InterFreq.E
xecSuccOut])/
([L.HHO.IntraeNB.InterFreq.
ExecAttOut]+
[L.HHO.IntereNB.InterFreq.E
xecAttOut])*{100}
Inter-RAT Handover
Out Success Rate
(LTE to CDMA)
none
Measuremen
t related to
IRATHOOU
T
([L.IRATHO.E2C.ExecSuccO
ut])/
([L.IRATHO.E2C.ExecAttOut
])*{100}
Inter-RAT Handover
Out Success Rate
(LTE to WCDMA)
none
Measuremen
t related to
IRATHOOU
T
([L.IRATHO.E2W.ExecSuccO
ut])/
([L.IRATHO.E2W.ExecAttOu
t])*{100}
Inter-RAT Handover
Out Success Rate
(LTE to GSM)
none
Measuremen
t related to
IRATHOOU
T
([L.IRATHO.E2G.ExecSuccO
ut])/
([L.IRATHO.E2G.ExecAttOut
])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
537
PRS
Performance Report Reference
NE Type
LTE
Object Type
LTE Cell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Retainabi
lity
none
Measuremen
t related to
E-RAB
release
([L.E-RAB.AbnormRel.QCI.
1])/([L.ERAB.AbnormRel.QCI.1]+
[L.E-RAB.NormRel.QCI.
1])*{100}
538
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
none
Measuremen
t related to
E-RAB
release
((([L.ERAB.AbnormRel.QCI.1]+
[L.E-RAB.AbnormRel.QCI.
2]+[L.ERAB.AbnormRel.QCI.3]+
[L.E-RAB.AbnormRel.QCI.
4]+[L.ERAB.AbnormRel.QCI.5]+
[L.E-RAB.AbnormRel.QCI.
6]+[L.ERAB.AbnormRel.QCI.7]+
[L.E-RAB.AbnormRel.QCI.
8]+[L.ERAB.AbnormRel.QCI.9])))/
((([L.ERAB.AbnormRel.QCI.1]+
[L.E-RAB.AbnormRel.QCI.
2]+[L.ERAB.AbnormRel.QCI.3]+
[L.E-RAB.AbnormRel.QCI.
4]+[L.ERAB.AbnormRel.QCI.5]+
[L.E-RAB.AbnormRel.QCI.
6]+[L.ERAB.AbnormRel.QCI.7]+
[L.E-RAB.AbnormRel.QCI.
8]+[L.ERAB.AbnormRel.QCI.9]+
[L.E-RAB.NormRel.QCI.1]+
[L.E-RAB.NormRel.QCI.2]+
[L.E-RAB.NormRel.QCI.3]+
[L.E-RAB.NormRel.QCI.4]+
[L.E-RAB.NormRel.QCI.5]+
[L.E-RAB.NormRel.QCI.6]+
[L.E-RAB.NormRel.QCI.7]+
[L.E-RAB.NormRel.QCI.8]+
[L.E-RAB.NormRel.QCI.
9])))*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
539
PRS
Performance Report Reference
NE Type
LTE
Object Type
LTE Cell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
Radio Bearers of
QCI 1
none
Measuremen
t related to
DRB
[L.Traffic.DRB.QCI.1]
Radio Bearers of
QCI 2
none
Measuremen
t related to
DRB
[L.Traffic.DRB.QCI.2]
Radio Bearers of
QCI 3
none
Measuremen
t related to
DRB
[L.Traffic.DRB.QCI.3]
Radio Bearers of
QCI 4
none
Measuremen
t related to
DRB
[L.Traffic.DRB.QCI.4]
Radio Bearers of
QCI 5
none
Measuremen
t related to
DRB
[L.Traffic.DRB.QCI.5]
Radio Bearers of
QCI 6
none
Measuremen
t related to
DRB
[L.Traffic.DRB.QCI.6]
Radio Bearers of
QCI 7
none
Measuremen
t related to
DRB
[L.Traffic.DRB.QCI.7]
Radio Bearers of
QCI 8
none
Measuremen
t related to
DRB
[L.Traffic.DRB.QCI.8]
540
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Radio Bearers of
QCI 9
none
Measuremen
t related to
DRB
[L.Traffic.DRB.QCI.9]
DL Traffic Volume
of QCI 1
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.1]
DL Traffic Volume
of QCI 2
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.2]
DL Traffic Volume
of QCI 3
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.3]
DL Traffic Volume
of QCI 4
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.4]
DL Traffic Volume
of QCI 5
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.5]
DL Traffic Volume
of QCI 6
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.6]
DL Traffic Volume
of QCI 7
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.7]
DL Traffic Volume
of QCI 8
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.8]
DL Traffic Volume
of QCI 9
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.9]
UL Traffic Volume
of QCI 1
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.1]
UL Traffic Volume
of QCI 2
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.2]
UL Traffic Volume
of QCI 3
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.3]
541
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
UL Traffic Volume
of QCI 4
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.4]
UL Traffic Volume
of QCI 5
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.5]
UL Traffic Volume
of QCI 6
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.6]
UL Traffic Volume
of QCI 7
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.7]
UL Traffic Volume
of QCI 8
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.8]
UL Traffic Volume
of QCI 9
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.9]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
LTE
Issue 01 (2016-09-15)
542
PRS
Performance Report Reference
Object Type
LTE Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BTS
Traffic
and
Energy
Consump
tion
Report
Energy
Consumption(kwh)
none
Measuremen
t related to
eNodeB
[L.Device.eNodeB.EnergyCon
sume]
PS Traffic(kbit)
none
Thruput
Measuremen
t Unit
([L.Thrp.bits.DL.QCI.1]+
[L.Thrp.bits.DL.QCI.2]+
[L.Thrp.bits.DL.QCI.3]+
[L.Thrp.bits.DL.QCI.4]+
[L.Thrp.bits.DL.QCI.5]+
[L.Thrp.bits.DL.QCI.6]+
[L.Thrp.bits.DL.QCI.7]+
[L.Thrp.bits.DL.QCI.8]+
[L.Thrp.bits.DL.QCI.9])/
{1000}
Total Traffic(kbit)
none
Thruput
Measuremen
t Unit
([L.Thrp.bits.DL.QCI.1]+
[L.Thrp.bits.DL.QCI.2]+
[L.Thrp.bits.DL.QCI.3]+
[L.Thrp.bits.DL.QCI.4]+
[L.Thrp.bits.DL.QCI.5]+
[L.Thrp.bits.DL.QCI.6]+
[L.Thrp.bits.DL.QCI.7]+
[L.Thrp.bits.DL.QCI.8]+
[L.Thrp.bits.DL.QCI.9])/
{1000}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
543
PRS
Performance Report Reference
NE Type
LTE
Object Type
LTE Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Network
Energy
Efficienc
y
Indicator
Report
EE(bit/joule)
none
Thruput
Measuremen
t Unit
([L.Thrp.bits.DL.QCI.1]+
[L.Thrp.bits.DL.QCI.2]+
[L.Thrp.bits.DL.QCI.3]+
[L.Thrp.bits.DL.QCI.4]+
[L.Thrp.bits.DL.QCI.5]+
[L.Thrp.bits.DL.QCI.6]+
[L.Thrp.bits.DL.QCI.7]+
[L.Thrp.bits.DL.QCI.8]+
[L.Thrp.bits.DL.QCI.9])/
{1000}/
[L.Device.eNodeB.EnergyCon
sume]/{3600}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
544
PRS
Performance Report Reference
14
Issue 01 (2016-09-15)
545
PRS
Performance Report Reference
NE Type
MGW
Object Type
MGW
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
MGW
NE
Number of total
received H248 bytes
numb
er
H.248 SCTP
Signaling
Link Set
Measuremen
t of the
Whole
Equipment
Number of total
received H248
messages
numb
er
H.248 SCTP
Signaling
Link Set
Measuremen
t of the
Whole
Equipment
Failed Request
Number Because of
Busy
numb
er
Statistics of
EC
Occupation
of the Whole
Equipment
Configured Number
numb
er
Statistics of
EC
Occupation
of the Whole
Equipment
546
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
547
PRS
Performance Report Reference
15
Issue 01 (2016-09-15)
548
PRS
Performance Report Reference
NE Type
MSCe
Object Type
MSCe
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Number
of
Subscrib
ers
Local Subscribers
entrie
s
VLR
Subscriber
Measuremen
t
Roaming
Subscribers
entrie
s
VLR
Subscriber
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
549
PRS
Performance Report Reference
NE Type
MSCe
Object Type
Module
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Processo
r Load
CPU Usage
Measuremen
t
CPU Usage
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCe
Object Type
MTP Signaling Link
Issue 01 (2016-09-15)
550
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Load
over
Signaling
Links
MTP
Signaling
Link Traffic
Measuremen
t
Received Seizure
Ratio
MTP
Signaling
Link Traffic
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCe
Object Type
Office Direction
Issue 01 (2016-09-15)
551
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Load
over
Trunk
Circuits
Erl
Incoming
Office
Measuremen
t Based on
Office
Direction
Erl
Outgoing
Office
Measuremen
t Based on
Office
Direction
Trunk Outgoing
Overflows
times
Outgoing
Office
Measuremen
t Based on
Office
Direction
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCe
Object Type
MSCe
Issue 01 (2016-09-15)
552
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Basic
Telecom
ServiceS
pecific
KPI
MOC TCH
Assignment
Requests
times
Assignment
Procedure
Measuremen
t
MTC TCH
Assignment
Requests
times
Assignment
Procedure
Measuremen
t
Assignment Success
Ratio(%)
Assignment
Procedure
Measuremen
t
Pagings
times
MTC
Completion
Measuremen
t
Paging Success
Ratio(%)
MTC
Completion
Measuremen
t
[Paging Responses]/
[Pagings]*{100}
Call Attempts
(ORG)
times
Originating
Traffic
Measuremen
t
Call Attempts(IEX)
times
Incoming
Traffic
Measuremen
t
Call Completion
Ratio(%)
Originating
Traffic
Measuremen
t
([Calls Connected(ORG)]+
[Calls Connected(IEX)])/
([Call Attempts (ORG)]+[Call
Attempts(IEX)])*{100}
Calls
Connected(ORG)
times
Originating
Traffic
Measuremen
t
553
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Calls
Connected(IEX)
times
Incoming
Traffic
Measuremen
t
Call Answer
Ratio(%)
Originating
Traffic
Measuremen
t
([Calls Answered(ORG)]+
[Calls Answered(IEX)])/
([Calls Connected(ORG)]+
[Calls
Connected(IEX)])*{100}
Answered
Traffic(IEX)
Erl
Incoming
Traffic
Measuremen
t
Answered
Traffic(ORG)
Erl
Originating
Traffic
Measuremen
t
Answered
Traffic(erl)
Erl
Originating
Traffic
Measuremen
t
[Answered Traffic(ORG)]+
[Answered Traffic(IEX)]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCe
Issue 01 (2016-09-15)
554
PRS
Performance Report Reference
Object Type
MSCe
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
ServiceS
pecific
KPI
MO Short Message
Submission
Attempts
times
Short
Message
Service
Measuremen
t
SMS Origination
Success Ratio(%)
Short
Message
Service
Measuremen
t
[Successful MO Short
Message Submissions]/[MO
Short Message Submission
Attempts]*{100}
MT Short Message
Submission
Attempts
times
Short
Message
Service
Measuremen
t
SMS Termination
Success Ratio(%)
Short
Message
Service
Measuremen
t
[Successful MT Short
Message Submissions]/[MT
Short Message Submission
Attempts]*{100}
Originating Calls
times
PDSN
Traffic
Measuremen
t
PDSN Origination
Success Ratio(%)
PDSN
Traffic
Measuremen
t
Call Termination
times
PDSN
Traffic
Measuremen
t
PDSN Termination
Success Ratio(%)
PDSN
Traffic
Measuremen
t
555
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCe
Object Type
MSCe
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Mobility
Manage
mentSpe
cific KPI
Location Update
Requests
times
Location
Management
Service
Measuremen
t
Location Update
Success Ratio(%)
Location
Management
Service
Measuremen
t
[Successful Location
Updates]/[Location Update
Requests]*{100}
Authentication
Attempts
times
Authenticati
on Service
Measuremen
t
Authentication
Success Ratio(%)
Authenticati
on Service
Measuremen
t
[Successful Authentications]/
[Authentication
Attempts]*{100}
556
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Handoff Success
Ratio(%)
Handoff
Measuremen
t
Intra-MSC Hard
Handoff Requests
times
Handoff
Measuremen
t
Intra-office Handoff
Success Ratio(%)
Handoff
Measuremen
t
Successful Incoming
Handoff Back
times
Inter-Office
Handoff
Measuremen
t
Incoming Handoff
Back Requests
times
Inter-Office
Handoff
Measuremen
t
Successful Incoming
Handoff Forward
times
Inter-Office
Handoff
Measuremen
t
Incoming Handoff
Forward Requests
times
Inter-Office
Handoff
Measuremen
t
557
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Successful Incoming
Handoff to Third
times
Inter-Office
Handoff
Measuremen
t
Incoming Handoff to
Third Requests
times
Inter-Office
Handoff
Measuremen
t
Successful Outgoing
Handoff Back
times
Inter-Office
Handoff
Measuremen
t
Outgoing Handoff
Back Requests
times
Inter-Office
Handoff
Measuremen
t
Successful Outgoing
Handoff Forward
times
Inter-Office
Handoff
Measuremen
t
Outgoing Handoff
Forward Requests
times
Inter-Office
Handoff
Measuremen
t
Successful Outgoing
Handoff to Third
times
Inter-Office
Handoff
Measuremen
t
Outgoing Handoff to
Third Requests
times
Inter-Office
Handoff
Measuremen
t
558
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-office Handoff
Success Ratio(%)
Inter-Office
Handoff
Measuremen
t
([Successful Incoming
Handoff Back]+[Successful
Incoming Handoff Forward]+
[Successful Incoming Handoff
to Third]+[Successful
Outgoing Handoff Back]+
[Successful Outgoing Handoff
Forward]+[Successful
Outgoing Handoff to Third])/
([Incoming Handoff Back
Requests]+[Incoming Handoff
Forward Requests]+[Incoming
Handoff to Third Requests]+
[Outgoing Handoff Back
Requests]+[Outgoing Handoff
Forward Requests]+[Outgoing
Handoff to Third
Requests])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
559
PRS
Performance Report Reference
16
Issue 01 (2016-09-15)
560
PRS
Performance Report Reference
NE Type
MSCServer
Object Type
BICCLink
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BICC
SCTP
Link
Number of Sent
Message Packets
entrie
s
Traffic over
BICC SCTP
Links
Number of Received
Message Packets
entrie
s
Traffic over
BICC SCTP
Links
Bytes of Message
Sent(MB)
MB
Traffic over
BICC SCTP
Links
Bytes of Message
Received(MB)
MB
Traffic over
BICC SCTP
Links
[Bytes of Received
Messages]/{1048576}
Congestion Times
times
Traffic over
BICC SCTP
Links
Congestion Duration
Traffic over
BICC SCTP
Links
Unavailable Times
times
Traffic over
BICC SCTP
Links
561
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Unavailable
Duration
Traffic over
BICC SCTP
Links
Flow of Link(MB)
MB
Traffic over
BICC SCTP
Links
Average Load of
Link(kbps)
kbit/s
Traffic over
BICC SCTP
Links
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCServer
Object Type
H248Link
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
H248
SCTP
Link
Number of Sent
Messages
times
Traffic over
H.248 SCTP
Links
562
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Received
Messages
times
Traffic over
H.248 SCTP
Links
Bytes of Message
Sent(MB)
MB
Traffic over
H.248 SCTP
Links
Bytes of Message
Received(MB)
MB
Traffic over
H.248 SCTP
Links
[Bytes of Received
Messages]/{1048576}
Congestion Times
times
Traffic over
H.248 SCTP
Links
Congestion Duration
Traffic over
H.248 SCTP
Links
Unavailable Times
times
Traffic over
H.248 SCTP
Links
Unavailable
Duration
Traffic over
H.248 SCTP
Links
Flow of Link(MB)
MB
Traffic over
H.248 SCTP
Links
Average Load of
Link(kbps)
kbit/s
Traffic over
H.248 SCTP
Links
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
563
PRS
Performance Report Reference
NE Type
MSCServer
Object Type
M2UALink
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M2UA
Link
Number of Sent
MAUP Messages
entrie
s
Traffic over
M2UA
Signaling
Links
Number of Received
MAUP Messages
entrie
s
Traffic over
M2UA
Signaling
Links
Bytes of Message
Sent(MB)
MB
Traffic over
M2UA
Signaling
Links
Bytes of Message
Received(MB)
MB
Traffic over
M2UA
Signaling
Links
Congestion Times
times
Traffic over
M2UA
Signaling
Links
Congestion Duration
Traffic over
M2UA
Signaling
Links
Unavailable Times
times
Traffic over
M2UA
Signaling
Links
564
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Unavailable
Duration
Traffic over
M2UA
Signaling
Links
Average Load of
Link(kbps)
kbit/s
Traffic over
M2UA
Signaling
Links
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCServer
Object Type
M3UALink
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M3UA
Link
Number of
Messages Sent
entrie
s
Traffic over
M3UA
Signaling
Links
565
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of
Messages Received
entrie
s
Traffic over
M3UA
Signaling
Links
Bytes of Message
Sent(MB)
MB
Traffic over
M3UA
Signaling
Links
Bytes of Message
Received(MB)
MB
Traffic over
M3UA
Signaling
Links
[Bytes of Messages
Received]/{1048576}
Congestion Times
times
Traffic over
M3UA
Signaling
Links
Congestion Duration
Traffic over
M3UA
Signaling
Links
Unavailable Times
times
Traffic over
M3UA
Signaling
Links
Unavailable
Duration
Traffic over
M3UA
Signaling
Links
Flow of Link(MB)
MB
Traffic over
M3UA
Signaling
Links
Average Load of
Link(kbps)
kbit/s
Traffic over
M3UA
Signaling
Links
566
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCServer
Object Type
MTP3BLink
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
MTP3B
Link
times
MTP3B
Signaling
Link
Measuremen
t
byte
MTP3B
Signaling
Link
Measuremen
t
Link Received
MSUs
times
MTP3B
Signaling
Link
Measuremen
t
Link Received
SIFSIO Octets
byte
MTP3B
Signaling
Link
Measuremen
t
567
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Link Congestion
Times
times
MTP3B
Signaling
Link
Measuremen
t
Link Congestion
Duration
MTP3B
Signaling
Link
Measuremen
t
MTP3B
Signaling
Link
Measuremen
t
MTP3B
Signaling
Link
Measuremen
t
Link Receiving
Used Rate
MTP3B
Signaling
Link
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCServer
Issue 01 (2016-09-15)
568
PRS
Performance Report Reference
Object Type
MTPLink
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
MTP3
Link
Signal Units of
Messages Sent
entrie
s
Traffic over
MTP
Signaling
Links
Bytes of Sent
Messages
entrie
s
Traffic over
MTP
Signaling
Links
Signal Units of
Messages Received
entrie
s
Traffic over
MTP
Signaling
Links
Bytes of Received
Messages
entrie
s
Traffic over
MTP
Signaling
Links
Congestion Times
times
Traffic over
MTP
Signaling
Links
Congestion Duration
Traffic over
MTP
Signaling
Links
Unavailable
Duration
Traffic over
MTP
Signaling
Links
Traffic over
MTP
Signaling
Links
Receive Seizure
Ratio
Traffic over
MTP
Signaling
Links
569
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCServer
Object Type
Module
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CPU
Load
Originated Call
Times
times
CPU Usage
Terminated Call
Times
times
CPU Usage
Congestion Times
times
CPU Usage
Congestion Duration
CPU Usage
Overload Times
times
CPU Usage
Overload Duration
CPU Usage
Average Seizure
Rate
CPU Usage
CPU Usage
Peak Seizure
Duration
CPU Usage
570
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BHCA
none
CPU Usage
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCServer
Object Type
MSCServer
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Device
capabilit
y
Number of VLR
Registered
Subscriber
none
Number of
VLR
Subscribers
Number of Local
Subscribers in VLR
entrie
s
Number of
VLR
Subscribers
Number of Roaming
Subscribers in VLR
entrie
s
Number of
VLR
Subscribers
571
PRS
Performance Report Reference
Subrep
ort
Name
2G MO
Call
2G MT
Call
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of VLR
Power-on Subscriber
none
Number of
VLR
Subscribers
MO Connected Rate
GSM
Subscriber
Originated
Calls
MO Answer Rate
GSM
Subscriber
Originated
Calls
[Answer Times]/[Call
Attempts]*{100}
Seizure Traffic
Erl
GSM
Subscriber
Originated
Calls
Call Completion
Traffic
Erl
GSM
Subscriber
Originated
Calls
Answer Traffic
Erl
GSM
Subscriber
Originated
Calls
Call Attempts
times
GSM
Subscriber
Originated
Calls
Call Completion
Times
times
GSM
Subscriber
Originated
Calls
Answer Times
times
GSM
Subscriber
Originated
Calls
MT Connected Rate
GSM
Subscriber
Terminated
Calls
[2G TERMINATED
ALERT]/[2G TERMINATED
CALL ATTEMPT]*{100}
572
PRS
Performance Report Reference
Subrep
ort
Name
3G MO
Call
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
MT Answer Rate
GSM
Subscriber
Terminated
Calls
[2G TERMINATED
ANSWER]/[2G
TERMINATED CALL
ATTEMPT]*{100}
2G TERMINATED
SEIZE USAGE
Erl
GSM
Subscriber
Terminated
Calls
2G TERMINATED
ALERT USAGE
Erl
GSM
Subscriber
Terminated
Calls
2G TERMINATED
ANSWER USAGE
Erl
GSM
Subscriber
Terminated
Calls
2G TERMINATED
CALL ATTEMPT
times
GSM
Subscriber
Terminated
Calls
2G TERMINATED
ALERT
times
GSM
Subscriber
Terminated
Calls
2G TERMINATED
ANSWER
times
GSM
Subscriber
Terminated
Calls
MO Connected Rate
UTRAN
Subscriber
Originated
Calls
MO Answer Rate
UTRAN
Subscriber
Originated
Calls
[Answer Times]/[Call
Attempts]*{100}
Seizure Traffic
Erl
UTRAN
Subscriber
Originated
Calls
573
PRS
Performance Report Reference
Subrep
ort
Name
3G MT
Call
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Call Completion
Traffic
Erl
UTRAN
Subscriber
Originated
Calls
Answer Traffic
Erl
UTRAN
Subscriber
Originated
Calls
Call Attempts
times
UTRAN
Subscriber
Originated
Calls
Call Completion
Times
times
UTRAN
Subscriber
Originated
Calls
Answer Times
times
UTRAN
Subscriber
Originated
Calls
MT Connected Rate
UTRAN
Subscriber
Terminated
Calls
[3G TERMINATED
ALERT]/[3G TERMINATED
CALL_ATTEMPT]*{100}
MT Answer Rate
UTRAN
Subscriber
Terminated
Calls
[3G TERMINATED
ANSWER]/[3G
TERMINATED
CALL_ATTEMPT]*{100}
3G TERMINATED
SEIZE USAGE
Erl
UTRAN
Subscriber
Terminated
Calls
3G TERMINATED
ALERT USAGE
Erl
UTRAN
Subscriber
Terminated
Calls
3G TERMINATED
ANSWER USAGE
Erl
UTRAN
Subscriber
Terminated
Calls
574
PRS
Performance Report Reference
Subrep
ort
Name
Other
Call
SMS
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
3G TERMINATED
CALL_ATTEMPT
times
UTRAN
Subscriber
Terminated
Calls
3G TERMINATED
ALERT
times
UTRAN
Subscriber
Terminated
Calls
3G TERMINATED
ANSWER
times
UTRAN
Subscriber
Terminated
Calls
Incoming Connected
Ratio
Incoming
Calls
Call Completion
Traffic
Erl
Incoming
Calls
Seizure Times
times
Incoming
Calls
Outgoing Connected
Ratio
Outgoing
Calls
Call Completion
Traffic
Erl
Outgoing
Calls
Seizure Attempts
times
Outgoing
Calls
ALERTING
TRAFFIC
Erl
Transit Calls
MO SMS Success
Ratio
MSC Basic
Services
MT SMS Success
Ratio
MSC Basic
Services
times
MSC Basic
Services
Receive SMMT
Times
times
MSC Basic
Services
575
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCServer
Object Type
Trunk Group
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Incoming
Seizure Times
times
Incoming
Calls
through
Trunk
Groups
Call Completion
Times
times
Incoming
Calls
through
Trunk
Groups
Answer Times
times
Incoming
Calls
through
Trunk
Groups
Number of Installed
Circuits
piece
Incoming
Calls
through
Trunk
Groups
576
PRS
Performance Report Reference
Subrep
ort
Name
Outgoing
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Available
Circuits
piece
Incoming
Calls
through
Trunk
Groups
Seizure Traffic
Erl
Incoming
Calls
through
Trunk
Groups
Call Completion
Traffic
Erl
Incoming
Calls
through
Trunk
Groups
Answer Traffic
Erl
Incoming
Calls
through
Trunk
Groups
Incoming
Calls
through
Trunk
Groups
[Number of Available
Circuits]/[Number of Installed
Circuits]*{100}
Erl
Incoming
Calls
through
Trunk
Groups
[Seizure Traffic]/[Number of
Available Circuits]
Seizure Attempts
times
Outgoing
Calls
through
Trunk
Groups
Seizure Times
times
Outgoing
Calls
through
Trunk
Groups
577
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Call Completion
Times
times
Outgoing
Calls
through
Trunk
Groups
Answer Times
times
Outgoing
Calls
through
Trunk
Groups
times
Outgoing
Calls
through
Trunk
Groups
Number of Installed
Circuits
piece
Outgoing
Calls
through
Trunk
Groups
Number of Available
Circuits
piece
Outgoing
Calls
through
Trunk
Groups
Seizure Traffic
Erl
Outgoing
Calls
through
Trunk
Groups
Call Completion
Traffic
Erl
Outgoing
Calls
through
Trunk
Groups
Answer Traffic
Erl
Outgoing
Calls
through
Trunk
Groups
578
PRS
Performance Report Reference
Subrep
ort
Name
Total
Counter
Coun
ter
Unit
Function
Subset
Formula
Outgoing
Calls
through
Trunk
Groups
[Number of Available
Circuits]/[Number of Installed
Circuits]*{100}
Erl
Outgoing
Calls
through
Trunk
Groups
[Seizure Traffic]/[Number of
Available Circuits]
Total Traffic
Erl
Incoming
Calls
through
Trunk
Groups
[Seizure Traffic]+[Seizure
Traffic]
Erl
Incoming
Calls
through
Trunk
Groups
[Seizure Traffic]/[Number of
Available Circuits]+[Seizure
Traffic]/[Number of Available
Circuits]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCServer
Object Type
Office Direction
Issue 01 (2016-09-15)
579
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Incoming
Number of Installed
Circuits
piece
Incoming
Calls in
Mobile
Office
Directions
Number of Available
Circuits
piece
Incoming
Calls in
Mobile
Office
Directions
Seizure Traffic
Erl
Incoming
Calls in
Mobile
Office
Directions
Call Completion
Traffic
Erl
Incoming
Calls in
Mobile
Office
Directions
Answer Traffic
Erl
Incoming
Calls in
Mobile
Office
Directions
Connected Ratio
Incoming
Calls in
Mobile
Office
Directions
Answer Ratio
Incoming
Calls in
Mobile
Office
Directions
[Answer Times]/[Seizure
Times]*{100}
Seizure Times
times
Incoming
Calls in
Mobile
Office
Directions
580
PRS
Performance Report Reference
Subrep
ort
Name
Outgoing
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
TK Avail Ratio
Incoming
Calls in
Mobile
Office
Directions
[Number of Available
Circuits]/[Number of Installed
Circuits]*{100}
Erl
Incoming
Calls in
Mobile
Office
Directions
[Seizure Traffic]/[Number of
Available Circuits]
Number of Installed
Circuits
piece
Outgoing
Calls in
Mobile
Office
Directions
Number of Available
Circuits
piece
Outgoing
Calls in
Mobile
Office
Directions
Seizure Traffic
Erl
Outgoing
Calls in
Mobile
Office
Directions
Call Completion
Traffic
Erl
Outgoing
Calls in
Mobile
Office
Directions
Answer Traffic
Erl
Outgoing
Calls in
Mobile
Office
Directions
Seizure Ratio
Outgoing
Calls in
Mobile
Office
Directions
[Seizure Times]/[Seizure
Attempts]*{100}
581
PRS
Performance Report Reference
Subrep
ort
Name
Total
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Connected Ratio
Outgoing
Calls in
Mobile
Office
Directions
Answer Ratio
Outgoing
Calls in
Mobile
Office
Directions
[Answer Times]/[Seizure
Attempts]*{100}
Seizure Attempts
times
Outgoing
Calls in
Mobile
Office
Directions
TK Avail Ratio
Outgoing
Calls in
Mobile
Office
Directions
[Number of Available
Circuits]/[Number of Installed
Circuits]*{100}
Erl
Outgoing
Calls in
Mobile
Office
Directions
[Seizure Traffic]/[Number of
Available Circuits]
Total Traffic
Erl
Incoming
Calls in
Mobile
Office
Directions
[Seizure Traffic]+[Seizure
Traffic]
Erl
Incoming
Calls in
Mobile
Office
Directions
[Seizure Traffic]/[Number of
Available Circuits]+[Seizure
Traffic]/[Number of Available
Circuits]
582
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
MSCServer
Object Type
MSCServer
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Handove
r
Basic Outgoing
Handover Requests
times
Local MSC
Handover
Assign
GSM
Assignment
Assign Request
Times
times
GSM
Assignment
Paging Success
Ratio
MSC Basic
Services
Paging Times
times
MSC Basic
Services
Paging
Issue 01 (2016-09-15)
583
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Location
Update
Location Update
Success Rate
Location
Management
Service
Location Update
Requests
times
Location
Management
Service
Authentication
Success Rate
Authenticati
on
AUTH Requests
times
Authenticati
on
MSC Basic
Services
times
MSC Basic
Services
Authenti
cation
and
Cipher
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
584
PRS
Performance Report Reference
17
Issue 01 (2016-09-15)
585
PRS
Performance Report Reference
NE Type
NodeB
Object Type
Local Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
NodeB
Report
VS.HSUPA.LoadOu
tput.0
times
HSUPA
measurement
s per local
cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
NodeB
Issue 01 (2016-09-15)
586
PRS
Performance Report Reference
Object Type
NodeB
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BTS
Traffic
and
Energy
Consump
tion
Report
CS Traffic(Erl)
none
Measuremen
t related to
throughput
per cell
[VS.AMR.Erlang.BestCell]
PS Traffic(kbit)
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.DL.8.Thruput]+
[VS.PS.Bkg.DL.16.Thruput]+
[VS.PS.Bkg.DL.32.Thruput]+
[VS.PS.Bkg.DL.64.Thruput]+
[VS.PS.Bkg.DL.128.Thruput]
+[VS.PS.Bkg.DL.
144.Thruput]+
[VS.PS.Bkg.DL.256.Thruput]
+[VS.PS.Bkg.DL.
384.Thruput]+
[VS.DcchSrbKbps.Dl.Thruput
]+
[VS.HSDPA.MeanChThrough
put.TotalBytes]*{8}+
[VS.CS.Conv.DL.
64.Thruput])/{1000}
587
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Total Traffic(kbit)
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.DL.8.Thruput]+
[VS.PS.Bkg.DL.16.Thruput]+
[VS.PS.Bkg.DL.32.Thruput]+
[VS.PS.Bkg.DL.64.Thruput]+
[VS.PS.Bkg.DL.128.Thruput]
+[VS.PS.Bkg.DL.
144.Thruput]+
[VS.PS.Bkg.DL.256.Thruput]
+[VS.PS.Bkg.DL.
384.Thruput]+
[VS.DcchSrbKbps.Dl.Thruput
]+
[VS.HSDPA.MeanChThrough
put.TotalBytes]*{8}+
[VS.CS.Conv.DL.
64.Thruput])/{1000}+
(([VS.AMR.Ctrl.DL12.2]*{12
.2}+[VS.RB.AMR.DL.
10.2]*{10.2}+
[VS.RB.AMR.DL.
7.95]*{7.95}+
[VS.RB.AMR.DL.
7.4]*{7.4}+
[VS.RB.AMR.DL.
6.7]*{6.7}+
[VS.RB.AMR.DL.
5.9]*{5.9}+
[VS.RB.AMR.DL.
5.15]*{5.15}+
[VS.RB.AMR.DL.
4.75]*{4.75})*{0.5})
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
588
PRS
Performance Report Reference
NE Type
NodeB
Object Type
NodeB
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Network
Energy
Efficienc
y
Indicator
Report
EE(bit/joule)
none
Measuremen
t related to
throughput
per cell
(([VS.PS.Bkg.DL.8.Thruput]+
[VS.PS.Bkg.DL.16.Thruput]+
[VS.PS.Bkg.DL.32.Thruput]+
[VS.PS.Bkg.DL.64.Thruput]+
[VS.PS.Bkg.DL.128.Thruput]
+[VS.PS.Bkg.DL.
144.Thruput]+
[VS.PS.Bkg.DL.256.Thruput]
+[VS.PS.Bkg.DL.
384.Thruput]+
[VS.DcchSrbKbps.Dl.Thruput
]+
[VS.HSDPA.MeanChThrough
put.TotalBytes]*{8}+
[VS.CS.Conv.DL.
64.Thruput])/{1000}+
(([VS.AMR.Ctrl.DL12.2]*{12
.2}+[VS.RB.AMR.DL.
10.2]*{10.2}+
[VS.RB.AMR.DL.
7.95]*{7.95}+
[VS.RB.AMR.DL.
7.4]*{7.4}+
[VS.RB.AMR.DL.
6.7]*{6.7}+
[VS.RB.AMR.DL.
5.9]*{5.9}+
[VS.RB.AMR.DL.
5.15]*{5.15}+
[VS.RB.AMR.DL.
4.75]*{4.75})*{0.5}))/
[VS.BTS.EnergyCons.Adding
]/{3600}
589
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
590
PRS
Performance Report Reference
18
Issue 01 (2016-09-15)
591
PRS
Performance Report Reference
NE Type
PCU
Object Type
Cell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Retainabi
lity
Uplink TBF
establishmen
t/release
measurement
Downlink GPRS
TBF Drop Rate(%)
Downlink
TBF
establishmen
t/release
measurement
Uplink
EGPRS TBF
establishmen
t/release
measurement
Downlink EGPRS
TBF Drop Rate(%)
Downlink
EGPRS TBF
establishmen
t/release
measurement
592
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
PCU
Object Type
Cell
Issue 01 (2016-09-15)
593
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Transmis
son
Retransmission Rate
of RLC Uplink Data
Block (%)
Uplink RLC
data
transmission
measurement
({1}-(([Number of uplink
RLC data blocks using
CS1]*({1}-[Retransmission
rate of RLC uplink data block
using CS1(%)]/{100}))+
([Number of uplink RLC data
blocks using CS2]*({1}[Retransmission rate of RLC
uplink data block using
CS2(%)]/{100}))+([Number
of uplink RLC data blocks
using CS3]*({1}[Retransmission rate of RLC
uplink data block using
CS3(%)]/{100}))+([Number
of uplink RLC data blocks
using CS4]*({1}[Retransmission rate of RLC
uplink data block using
CS4(%)]/{100})))/[Total
number of uplink RLC data
blocks])*{100}
Retransmission Rate
of RLC Downlink
Data Block (%)
Downlink
RLC data
transmission
measurement
({1}-(([Number of downlink
RLC data blocks using
CS1]*({1}-[Retransmission
rate of RLC downlink data
block using CS1(%)]/{100}))
+([Number of downlink RLC
data blocks using CS2]*({1}[Retransmission rate of RLC
downlink data block using
CS2(%)]/{100}))+([Number
of downlink RLC data blocks
using CS3]*({1}[Retransmission rate of RLC
downlink data block using
CS3(%)]/{100}))+([Number
of downlink RLC data blocks
using CS4]*({1}[Retransmission rate of RLC
downlink data block using
CS4(%)]/{100})))/[Total
number of downlink RLC data
blocks])*{100}
594
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Retransmission Rate
of Uplink EGPRS
RLC Data Block (%)
Uplink
GMSK
EGPRS RLC
data
retransmissio
n rate
measurement
({1}-(([Number of uplink
EGPRS RLC data blocks
using MCS1]*({1}[Retransmission rate of uplink
EGPRS RLC data block using
MCS1(%)]/{100}))+([Number
of uplink EGPRS RLC data
blocks using MCS2]*({1}[Retransmission rate of uplink
EGPRS RLC data block using
MCS2(%)]/{100}))+([Number
of uplink EGPRS RLC data
blocks using MCS3]*({1}[Retransmission rate of uplink
EGPRS RLC data block using
MCS3(%)]/{100}))+([Number
of uplink EGPRS RLC data
blocks using MCS4]*({1}[Retransmission rate of uplink
EGPRS RLC data block using
MCS4(%)]/{100}))+([Number
of uplink EGPRS RLC data
blocks using MCS5]*({1}[Retransmission rate of uplink
EGPRS RLC data block using
MCS5(%)]/{100}))+([Number
of uplink EGPRS RLC data
blocks using MCS6]*({1}[Retransmission rate of uplink
EGPRS RLC data block using
MCS6(%)]/{100}))+([Number
of uplink EGPRS RLC data
blocks using MCS7]*({1}[Retransmission rate of uplink
EGPRS RLC data block using
MCS7(%)]/{100}))+([Number
of uplink EGPRS RLC data
blocks using MCS8]*({1}[Retransmission rate of uplink
EGPRS RLC data block using
MCS8(%)]/{100}))+([Number
of uplink EGPRS RLC data
blocks using MCS9]*({1}[Retransmission rate of uplink
EGPRS RLC data block using
MCS9(%)]/{100})))/[Total
number of uplink EGPRS
RLC data blocks])*{100}
595
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Retransmission Rate
of Downlink EGPRS
RLC Data Block (%)
Downlink
GMSK
EGPRS RLC
data
retransmissio
n rate
measurement
({1}-(([Number of downlink
EGPRS RLC data blocks
using MCS1]*({1}[Retransmission rate of
downlink EGPRS RLC data
block using MCS1(%)]/
{100}))+([Number of
downlink EGPRS RLC data
blocks using MCS2]*({1}[Retransmission rate of
downlink EGPRS RLC data
block using MCS2(%)]/
{100}))+([Number of
downlink EGPRS RLC data
blocks using MCS4]*({1}[Retransmission rate of
downlink EGPRS RLC data
block using MCS4(%)]/
{100}))+([Number of
downlink EGPRS RLC data
blocks using MCS4]*({1}[Retransmission rate of
downlink EGPRS RLC data
block using MCS4(%)]/
{100}))+([Number of
downlink EGPRS RLC data
blocks using MCS5]*({1}[Retransmission rate of
downlink EGPRS RLC data
block using MCS5(%)]/
{100}))+([Number of
downlink EGPRS RLC data
blocks using MCS6]*({1}[Retransmission rate of
downlink EGPRS RLC data
block using MCS6(%)]/
{100}))+([Number of
downlink EGPRS RLC data
blocks using MCS7]*({1}[Retransmission rate of
downlink EGPRS RLC data
block using MCS7(%)]/
{100}))+([Number of
downlink EGPRS RLC data
blocks using MCS8]*({1}[Retransmission rate of
downlink EGPRS RLC data
block using MCS8(%)]/
596
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
{100}))+([Number of
downlink EGPRS RLC data
blocks using MCS9]*({1}[Retransmission rate of
downlink EGPRS RLC data
block using MCS9(%)]/
{100})))/[Total number of
downlink EGPRS RLC data
blocks])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
PCU
Object Type
Cell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accessab
ility
Uplink Assignment
Success Rate(%)
Uplink TBF
establishmen
t/release
measurement
597
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Downlink
Assignment Success
Rate(%)
Downlink
TBF
establishmen
t/release
measurement
([Number of successful
downlink TBF establishment]/
[Number of downlink TBF
establishment
attempts])*{100}
Mean Inter-arrival
Time of Packet
Access Requests on
CCCH(s)
Packet
access
performance
measurement
on CCCH
{GP}*{60}/[Number of
packet channel requests
received on CCCH]
Uplink TBF
establishmen
t/release
measurement
Downlink GPRS
TBF Congestion
Rate(%)
Downlink
TBF
establishmen
t/release
measurement
Uplink
EGPRS TBF
establishmen
t/release
measurement
Downlink GPRS
TBF Congestion
Rate(%)
Downlink
EGPRS TBF
establishmen
t/release
measurement
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
598
PRS
Performance Report Reference
NE Type
PCU
Object Type
PCU
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Data
Through
put
Uplink RLC
Payload( kbits )
kilobi
ts
Uplink RLC
data
transmission
measurement
Downlink RLC
Payload( kbits )
kilobi
ts
Downlink
RLC data
transmission
measurement
599
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Uplink EDGPRS
RLC
Payload( kbits )
kilobi
ts
Uplink
GMSK
EGPRS RLC
data
retransmissio
n rate
measurement
Downlink EDGPRS
RLC
Payload( kbits )
kilobi
ts
Downlink
GMSK
EGPRS RLC
data
retransmissio
n rate
measurement
([Number of downlink
EGPRS RLC data blocks
using MCS1]*{22}+[Number
of downlink EGPRS RLC data
blocks using MCS2]*{28}+
[Number of downlink EGPRS
RLC data blocks using
MCS3]*{37}+[Number of
downlink EGPRS RLC data
blocks using MCS4]*{44}+
[Number of downlink EGPRS
RLC data blocks using
MCS5]*{56}+[Number of
downlink EGPRS RLC data
blocks using MCS6]*{74}+
[Number of downlink EGPRS
RLC data blocks using
MCS7]*{56}+[Number of
downlink EGPRS RLC data
blocks using MCS8]*{68}+
[Number of downlink EGPRS
RLC data blocks using
MCS9]*{74})*{8}/{1024}
600
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Mean Payload
(kbytes) of the
Downlink Data at
the LLC Layer
kiloby
tes
Uplink LLC
data
transmission
measurement
Mean Payload
(kbytes) of the
Uplink Data at the
LLC Layer
kiloby
tes
Downlink
LLC data
transmission
measurement
Mean Downlink
NS_PDUs
Throughput(kbits/s)
kbit/s
NS
transmission
performance
measurement
601
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Uplink RLC
data
transmission
measurement
602
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
PCU
Object Type
Cell
Issue 01 (2016-09-15)
603
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Availabil
ity
Uplink PDTCH/
PACCH Utilization
Rate(%)
Cell radio
channel
performance
measurement
Downlink PDTCH/
PACCH Utilization
Rate(%)
Cell radio
channel
performance
measurement
PDCH Occupation
Rate(%)
PDCH
resource
performance
measurement
Pre-empted
Dynamic PDCH
Carrying Packet
Traffic Reclaimed
Success Rate(%)
PDCH
resource
performance
measurement
[Number of pre-empted
PDCHs carrying packet
traffic]*{100}/[Number of
dynamic PDCHs reclaimed by
BSC]
PDCH Allocation
Success Rate(%)
Uplink TBF
establishmen
t/release
measurement
kbit/s
PDCH
resource
performance
measurement
kbit/s
PDCH
resource
performance
measurement
604
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
605
PRS
Performance Report Reference
19
Issue 01 (2016-09-15)
606
PRS
Performance Report Reference
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Cell
Performa
nce
Measure
ment
CS Erlang
Traffic
Measuremen
t per RNC
[VS.CSLoad.Erlang.Equiv.RN
C]
607
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Connection Setup
Success Rate(CS)
RRC
connection
setup
measurement
per RNC
(([VS.RRC.SuccConnEstab.O
rgConv]+
[VS.RRC.SuccConnEstab.Org
Subs]+
[VS.RRC.SuccConnEstab.Tr
mConv]+
[VS.RRC.SuccConnEstab.Res
t]+
[VS.RRC.SuccConnEstab.Em
g]+
[VS.RRC.SuccConnEstab.Un
known])*(([RAB.SuccEstabC
SNoQueuing.Conv]+
[RAB.SuccEstabCSNoQueuing.Strm]+
[RAB.SuccEstabCSQueuing.Conv]+
[RAB.SuccEstabCSQueuing.Strm])))/
((([VS.RRC.AttConnEstab.Or
gConv]+
[VS.RRC.AttConnEstab.OrgS
ubs]+
[VS.RRC.AttConnEstab.Trm
Conv]+
[VS.RRC.AttConnEstab.Rest]
+
[VS.RRC.AttConnEstab.Emg]
+
[VS.RRC.AttConnEstab.Unkn
own]))*([RAB.AttEstabCS.Co
nv]))*{100}
Drop Rate(CS)
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
([VS.RAB.Loss.CS.Abnorm.R
NC]+
[VS.RAB.Loss.CS.RF.RNC])/
([RAB.SuccEstabCSNoQueuing.Conv]+
[RAB.SuccEstabCSNoQueuing.Strm]+
[RAB.SuccEstabCSQueuing.Conv]+
[RAB.SuccEstabCSQueuing.Strm])*{100}
PS Erlang
Traffic
Measuremen
t per RNC
[VS.PSLoad.ULThruput.RNC
]+
[VS.PSLoad.DLThruput.RNC
]
608
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC Connection
Setup Success
Rate(PS)
RRC
connection
setup
measurement
per RNC
((([VS.RRC.SuccConnEstab.
OrgInt]+
[VS.RRC.SuccConnEstab.Org
Bkg]+
[VS.RRC.SuccConnEstab.Tr
mInt]+
[VS.RRC.SuccConnEstab.Tr
mBkg]+
[VS.RRC.SuccConnEstab.Org
HPSi]+
[VS.RRC.SuccConnEstab.Tm
HPSi])*([VS.RRC.AttConnEs
tab.OrgInt]+
[VS.RRC.AttConnEstab.OrgB
kg]+
[VS.RRC.AttConnEstab.TrmI
nt]+
[VS.RRC.AttConnEstab.Trm
Bkg]+
[VS.RRC.AttConnEstab.OrgH
PSig]+
[VS.RRC.AttConnEstab.TmH
PSig])))/
(([RAB.SuccEstabPSNoQueuing.Conv]+
[RAB.SuccEstabPSNoQueuing.Strm]+
[RAB.SuccEstabPSNoQueuing.Intact]+
[RAB.SuccEstabPSNoQueuing.Bgrd]+
[RAB.SuccEstabPSNoQueuing.Conv]+
[RAB.SuccEstabPSQueuing.Strm]+
[RAB.SuccEstabPSQueuing.Intact]+
[RAB.SuccEstabPSQueuing.Bgrd])*([VS.RAB.AttEsta
bPS.Conv]+
[RAB.AttEstabPS.Strm]+
[RAB.AttEstabPS.Intact]+
[RAB.AttEstabPS.Bgrd]))*{1
00}
609
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Drop Rate(PS)
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
([VS.RAB.Loss.PS.Abnorm.R
NC]+
[VS.RAB.Loss.PS.RF.RNC])/
([RAB.SuccEstabPSNoQueuing.Conv]+
[RAB.SuccEstabPSNoQueuing.Strm]+
[RAB.SuccEstabPSNoQueuing.Intact]+
[RAB.SuccEstabPSNoQueuing.Bgrd]+
[RAB.SuccEstabPSQueuing.Conv]+
[RAB.SuccEstabPSQueuing.Strm]+
[RAB.SuccEstabPSQueuing.Intact]+
[RAB.SuccEstabPSQueuing.Bgrd])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Issue 01 (2016-09-15)
610
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Cell
Performa
nce
Measure
ment
CS Erlang
Traffic
Measuremen
t per RNC
[VS.CSLoad.Erlang.Equiv.RN
C]
Connection Setup
Success Rate(CS)
RRC
connection
setup
measurement
per RNC
(([VS.RRC.SuccConnEstab.O
rgConv]+
[VS.RRC.SuccConnEstab.Org
Subs]+
[VS.RRC.SuccConnEstab.Tr
mConv]+
[VS.RRC.SuccConnEstab.Res
t]+
[VS.RRC.SuccConnEstab.Em
g]+
[VS.RRC.SuccConnEstab.Un
known])*(([RAB.SuccEstabC
SNoQueuing.Conv]+
[RAB.SuccEstabCSNoQueuing.Strm]+
[RAB.SuccEstabCSQueuing.Conv]+
[RAB.SuccEstabCSQueuing.Strm])))/
((([VS.RRC.AttConnEstab.Or
gConv]+
[VS.RRC.AttConnEstab.OrgS
ubs]+
[VS.RRC.AttConnEstab.Trm
Conv]+
[VS.RRC.AttConnEstab.Rest]
+
[VS.RRC.AttConnEstab.Emg]
+
[VS.RRC.AttConnEstab.Unkn
own]))*([RAB.AttEstabCS.Co
nv]))*{100}
611
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Drop Rate(CS)
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
([VS.RAB.Loss.CS.Abnorm.R
NC]+
[VS.RAB.Loss.CS.RF.RNC])/
([RAB.SuccEstabCSNoQueuing.Conv]+
[RAB.SuccEstabCSNoQueuing.Strm]+
[RAB.SuccEstabCSQueuing.Conv]+
[RAB.SuccEstabCSQueuing.Strm])*{100}
PS Erlang
Traffic
Measuremen
t per RNC
[VS.PSLoad.ULThruput.RNC
]+
[VS.PSLoad.DLThruput.RNC
]
612
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC Connection
Setup Success
Rate(PS)
RRC
connection
setup
measurement
per RNC
((([VS.RRC.SuccConnEstab.
OrgInt]+
[VS.RRC.SuccConnEstab.Org
Bkg]+
[VS.RRC.SuccConnEstab.Tr
mInt]+
[VS.RRC.SuccConnEstab.Tr
mBkg]+
[VS.RRC.SuccConnEstab.Org
HPSi]+
[VS.RRC.SuccConnEstab.Tm
HPSi])*([VS.RRC.AttConnEs
tab.OrgInt]+
[VS.RRC.AttConnEstab.OrgB
kg]+
[VS.RRC.AttConnEstab.TrmI
nt]+
[VS.RRC.AttConnEstab.Trm
Bkg]+
[VS.RRC.AttConnEstab.OrgH
PSig]+
[VS.RRC.AttConnEstab.TmH
PSig])))/
(([RAB.SuccEstabPSNoQueuing.Conv]+
[RAB.SuccEstabPSNoQueuing.Strm]+
[RAB.SuccEstabPSNoQueuing.Intact]+
[RAB.SuccEstabPSNoQueuing.Bgrd]+
[RAB.SuccEstabPSNoQueuing.Conv]+
[RAB.SuccEstabPSQueuing.Strm]+
[RAB.SuccEstabPSQueuing.Intact]+
[RAB.SuccEstabPSQueuing.Bgrd])*([VS.RAB.AttEsta
bPS.Conv]+
[RAB.AttEstabPS.Strm]+
[RAB.AttEstabPS.Intact]+
[RAB.AttEstabPS.Bgrd]))*{1
00}
613
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Drop Rate(PS)
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
([VS.RAB.Loss.PS.Abnorm.R
NC]+
[VS.RAB.Loss.PS.RF.RNC])/
([RAB.SuccEstabPSNoQueuing.Conv]+
[RAB.SuccEstabPSNoQueuing.Strm]+
[RAB.SuccEstabPSNoQueuing.Intact]+
[RAB.SuccEstabPSNoQueuing.Bgrd]+
[RAB.SuccEstabPSQueuing.Conv]+
[RAB.SuccEstabPSQueuing.Strm]+
[RAB.SuccEstabPSQueuing.Intact]+
[RAB.SuccEstabPSQueuing.Bgrd])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Issue 01 (2016-09-15)
614
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
High
Call
Drop
Rate Cell
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.CS.Abnorm]+
[VS.RAB.Loss.CS.RF])/
([VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm]+
[VS.RAB.Loss.CS.Norm])*{1
00}
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*{1
00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Issue 01 (2016-09-15)
615
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
High
Call
Drop
Rate Cell
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.CS.Abnorm]+
[VS.RAB.Loss.CS.RF])/
([VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm]+
[VS.RAB.Loss.CS.Norm])*{1
00}
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*{1
00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Issue 01 (2016-09-15)
616
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
No
Services
Cell
RABSetupSucc
(Cell)
Measuremen
t of PS RAB
assignment
setup per cell
(([VS.RAB.SuccEstabCS.Con
v]+
[VS.RAB.SuccEstabCS.Str])/
([VS.RAB.AttEstabCS.Conv]
+
[VS.RAB.AttEstabCS.Str])*{
100})+
(([VS.RAB.SuccEstabPS.Con
v]+
[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*{
100})
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Issue 01 (2016-09-15)
617
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
No
Services
Cell
RABSetupSucc
(Cell)
Measuremen
t of PS RAB
assignment
setup per cell
(([VS.RAB.SuccEstabCS.Con
v]+
[VS.RAB.SuccEstabCS.Str])/
([VS.RAB.AttEstabCS.Conv]
+
[VS.RAB.AttEstabCS.Str])*{
100})+
(([VS.RAB.SuccEstabPS.Con
v]+
[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*{
100})
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Issue 01 (2016-09-15)
618
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Page
HS-DSCH to DCH
Handover Success
Rate(>95%)
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH]/
[VS.HSDPA.ChR.HSDSCHto
DCH.Att]*{100}
DCH to HS-DSCH
Handover Success
Rate(>95%)
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH]/
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att]*{100}
HS-DSCH Service
Cell Change Success
Rate(with Intra
HHO)(>95%)
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInt
raFreq]/
[VS.HSDPA.HHO.AttOutIntr
aFreq]*{100}
HS-DSCH Service
Cell Change Success
Rate(with Inter
HHO)(>95%)
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInt
erFreq]/
[VS.HSDPA.HHO.AttOutInte
rFreq]*{100}
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]
/
([VS.HSDPA.RAB.AttEstab
]*[VS.HSDPA.RAB.AttEstab]
)*{100}
HS-DSCH Service
Cell Change Success
Rate with
SHO(HSDPA to
HSDPA)(>95%)
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.Su
ccOut]/
[VS.HSDPA.SHO.CellChg.At
tOut]*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
619
PRS
Performance Report Reference
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
Volume
Measure
ment
CS Erlang
Traffic
Measuremen
t per RNC
[VS.CSLoad.Erlang.Equiv.RN
C]
PS Erlang
Traffic
Measuremen
t per RNC
[VS.PSLoad.ULThruput.RNC
]+
[VS.PSLoad.DLThruput.RNC
]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Issue 01 (2016-09-15)
620
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
UL
Interfere
nce Cell
VS.MinRTWP
Cell TX and
RX Power
Measuremen
t per cell
[VS.MinRTWP]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
UL
Interfere
nce Cell
VS.MinRTWP
Cell TX and
RX Power
Measuremen
t per cell
[VS.MinRTWP]
621
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Unavaila
ble Cell
VS.Cell.UnavailTim
e.OM
Measuremen
t related to
Algorithm
per cell
[VS.Cell.UnavailTime.OM]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
622
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Unavaila
ble Cell
VS.Cell.UnavailTim
e.OM
Measuremen
t related to
Algorithm
per cell
[VS.Cell.UnavailTime.OM]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Issue 01 (2016-09-15)
623
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Worst
Cell(Mor
ning
Busy
Time)
VS Setup Success
Ratio
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*{1
00}
VS RAB Setup
Success Ratio
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100}
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100}
VP Call Drop
Ratio(cell)
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Norm][VS.RAB.Loss.CS.Norm.AM
R]+
[VS.RAB.Loss.CS.Conv64K]
)*{100}
VS.Filter
Condtion(Worst
Cell)
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*{1
00})
+({4}*([VS.RAB.SuccEstab.
AMR]/
[VS.RAB.AttEstab.AMR]*{1
00}))
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
624
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Worst
Cell(Nig
ht Busy
Time)
VS Setup Success
Ratio
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*{1
00}
VS RAB Setup
Success Ratio
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100}
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100}
VP Call Drop
Ratio(cell)
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Norm][VS.RAB.Loss.CS.Norm.AM
R]+
[VS.RAB.Loss.CS.Conv64K]
)*{100}
VS.Filter
Condtion(Worst
Cell)
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*{1
00})
+({4}*([VS.RAB.SuccEstab.
AMR]/
[VS.RAB.AttEstab.AMR]*{1
00}))
625
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
626
PRS
Performance Report Reference
20
Issue 01 (2016-09-15)
627
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Issue 01 (2016-09-15)
628
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accessib
ility
Radio Access
Success Ratio
RRC
connection
setup
measurement
per cell
(([RRC.SuccConnEstab.OgCo
nvCall]+
[RRC.SuccConnEstab.OrgStr
Call]+
[RRC.SuccConnEstab.OrgItrC
all]+
[RRC.SuccConnEstab.OrgBkg
Call]+
[RRC.SuccConnEstab.OrgSub
Call]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrC
all]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCa
ll]+
[RRC.SuccConnEstab.Unkow
n]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallRe
Est]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig])/
([RRC.AttConnEstab.OrgCon
vCall]+
[RRC.AttConnEstab.OrgStrCa
ll]+
[RRC.AttConnEstab.OrgInter
Call]+
[RRC.AttConnEstab.OrgBkgC
all]+
[RRC.AttConnEstab.OgSubC
all]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInter
629
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Call]+
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100})*(([VS.RAB.Suc
cEstabCS.Conv]+
[VS.RAB.SuccEstabCS.Str])+
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg]))
/
(([VS.RAB.AttEstabCS.Conv]
+[VS.RAB.AttEstabCS.Str])+
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]))
RRC Setup Success
Ratio(other)
Issue 01 (2016-09-15)
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.IRAT
CelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
)/
([RRC.AttConnEstab.IRATCe
lRes]+
[RRC.AttConnEstab.IRATCC
O]+[RRC.AttConnEstab.Reg]
+
[RRC.AttConnEstab.Detach]
)*{100}
630
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OgCo
nvCall]+
[RRC.SuccConnEstab.OrgStr
Call]+
[RRC.SuccConnEstab.OrgItrC
all]+
[RRC.SuccConnEstab.OrgBkg
Call]+
[RRC.SuccConnEstab.OrgSub
Call]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrC
all]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCa
ll]+
[RRC.SuccConnEstab.Unkow
n]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallRe
Est]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig])/
([RRC.AttConnEstab.OrgCon
vCall]+
[RRC.AttConnEstab.OrgStrCa
ll]+
[RRC.AttConnEstab.OrgInter
Call]+
[RRC.AttConnEstab.OrgBkgC
all]+
[RRC.AttConnEstab.OgSubC
all]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInter
Call]+
631
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100}
Issue 01 (2016-09-15)
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*{1
00}
VP RAB Setup
Success Ratio
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100}
PS RAB Setup
Success Ratio
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*{
100}
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]
/
[VS.HSDPA.RAB.AttEstab
]*{100}
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.SuccEstab]
/
[VS.HSUPA.RAB.AttEstab
]*{100}
632
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Mobility
Soft Handover
Success Ratio(Cell)
Soft
Handover
Measuremen
t per cell
([SHO.SuccRLAddUESide]+
[SHO.SuccRLDelUESide])/
([SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide])*{10
0}
HS-DSCH Service
Cell Change Success
Ratio with SHO
(HSDPA to HSDPA)
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.Su
ccOut]/
[VS.HSDPA.SHO.CellChg.At
tOut]*{100}
Inter-frequency Hard
Handover Success
Ratio (HSDPA to
HSDPA)
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInt
erFreq]/
[VS.HSDPA.HHO.AttOutInte
rFreq]*{100}
CS Inter-RAT
Handover Success
Ratio (WCDMA to
GSM)(Cell)
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*{100}
633
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS Inter-RAT
Handover Success
Ratio (WCDMA to
GPRS)(Cell)
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutPSUTRAN
]/
[IRATHO.AttOutPSUTRAN
]*{100}
HSDPA Inter-RAT
Handover Success
Ratio (WCDMA to
GPRS)
InterRAT
Handover
Measuremen
t per cell
[VS.IRATHO.HSDPA.SuccO
utPSUTRAN]/
[VS.IRATHO.HSDPA.AttOut
PSUTRAN]*{100}
E-DCH Soft
Handover Success
Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.EDCH.SHO.Suc
c]/
[VS.HSUPA.EDCH.SHO.Att
]*{100}
HSUPA
Measuremen
t per cell
[VS.HSUPA.SHO.ServCellCh
g.Succ]/
[VS.HSUPA.SHO.ServCellCh
g.Att]*{100}
HSUPA
Measuremen
t per cell
[VS.HSUPA.HHO.InterFreq.
NoChR.Succ]/
[VS.HSUPA.HHO.InterFreq.
NoChR.Att]*{100}
E-DCH to DCH
Handover Success
Ratio (with Inter
HHO)
HSUPA
Measuremen
t per cell
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]/
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Att]*{100}
HSUPA Inter-RAT
Handover Success
Ratio (UTRAN to
GPRS)
InterRAT
Handover
Measuremen
t per cell
[VS.HSUPA.IRATHO.SuccO
utPSUTRAN]/
[VS.HSUPA.IRATHO.AttOut
PSUTRAN]*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
634
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Retainabi
lity
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100}
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.Norm.Rel.CS.Conv.RB.
64]+
[VS.RAB.Loss.CS.Conv64K]
)*{100}
PS Service Drop
Ratio
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*{1
00}
HSDPA Service
Drop Ratio
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.RAB.Loss.InActi
vity])*{100}
635
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA Service
Drop Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnor
m]/
([VS.HSUPA.RAB.Loss.Abno
rm]+
[VS.HSUPA.RAB.Loss.Norm
])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
HSDPA Mean UE
number
numb
er
HSDPA
Measuremen
t per cell
[VS.HSDPA.UE.Mean.Cell]
byte
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]
636
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA Mean UE
number
numb
er
HSUPA
Measuremen
t per cell
[VS.HSUPA.UE.Mean.Cell]
byte
HSUPA
Measuremen
t per cell
[VS.HSUPA.MeanChThrough
put.TotalBytes]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Cell
Load
Analysis
VS.MeanTCP
dBm
TX and RX
Power
Measuremen
t <per Cell>
637
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.MaxTCP
dBm
TX and RX
Power
Measuremen
t <per Cell>
VS.MinTCP
dBm
TX and RX
Power
Measuremen
t <per Cell>
VS.MeanRTWP
dBm
TX and RX
Power
Measuremen
t <per Cell>
VS.MaxRTWP
dBm
TX and RX
Power
Measuremen
t <per Cell>
VS.MinRTWP
dBm
TX and RX
Power
Measuremen
t <per Cell>
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
TP Analysis Report
Issue 01 (2016-09-15)
638
PRS
Performance Report Reference
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Access
RSCP
Segment
Ratio
VS.RRC.Access.Wo
rse.RSCP.Ratio
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.RS
CP.0
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.RS
CP.1
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.RS
CP.2
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.RS
CP.3
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.RS
CP.4
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.RS
CP.5
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.RS
CP.6
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.RS
CP.7
None
RRC MR
Measuremen
t <per Cell>
Formula
639
PRS
Performance Report Reference
Subrep
ort
Name
SHO
RSCP
Segment
Ratio
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.Access.RS
CP.8
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.RS
CP.9
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.Worse.RSC
P.Ratio
RRC MR
Measuremen
t <per Cell>
VS.SHO.RSCP.0
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.RSCP.1
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.RSCP.2
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.RSCP.3
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.RSCP.4
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.RSCP.5
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.RSCP.6
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.RSCP.7
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.RSCP.8
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.RSCP.9
None
RRC MR
Measuremen
t <per Cell>
640
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
MR
Report
RSCP
Segment
Ratio
VS.Periodic.MrRpt.
Worse.RSCP.Ratio
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
RSCP.0
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
RSCP.1
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
RSCP.2
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
RSCP.3
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
RSCP.4
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
RSCP.5
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
RSCP.6
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
RSCP.7
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
RSCP.8
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
RSCP.9
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.MrRpt.SH
O.RSCP
None
RRC MR
Measuremen
t <per Cell>
VS.MrRpt.Cum.SH
O
None
RRC MR
Measuremen
t <per Cell>
Mean
SHO
RSCP
Issue 01 (2016-09-15)
Formula
641
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RSCP.Cum.SHO
dBm
RRC MR
Measuremen
t <per Cell>
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
EcNo
Segment
Ratio
VS.RRC.Access.Wo
rse.EcNo.Ratio
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.Ec
No.0
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.Ec
No.1
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.Ec
No.2
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.Ec
No.3
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.Ec
No.4
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.Ec
No.5
None
RRC MR
Measuremen
t <per Cell>
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
642
PRS
Performance Report Reference
Subrep
ort
Name
Cell
Update
EcNo
Segment
Ratio
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.Access.Ec
No.6
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.Ec
No.7
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.Ec
No.8
None
RRC MR
Measuremen
t <per Cell>
VS.Cell.Updt.Worse.
EcNo.Ratio
RRC MR
Measuremen
t <per Cell>
VS.Cell.Updt.EcNo.
0
None
RRC MR
Measuremen
t <per Cell>
VS.Cell.Updt.EcNo.
1
None
RRC MR
Measuremen
t <per Cell>
VS.Cell.Updt.EcNo.
2
None
RRC MR
Measuremen
t <per Cell>
VS.Cell.Updt.EcNo.
3
None
RRC MR
Measuremen
t <per Cell>
VS.Cell.Updt.EcNo.
4
None
RRC MR
Measuremen
t <per Cell>
VS.Cell.Updt.EcNo.
5
None
RRC MR
Measuremen
t <per Cell>
VS.Cell.Updt.EcNo.
6
None
RRC MR
Measuremen
t <per Cell>
VS.Cell.Updt.EcNo.
7
None
RRC MR
Measuremen
t <per Cell>
VS.Cell.Updt.EcNo.
8
None
RRC MR
Measuremen
t <per Cell>
643
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
SHO
EcNo
Segment
Ratio
VS.SHO.Worse.EcN
o.Ratio
RRC MR
Measuremen
t <per Cell>
VS.SHO.EcNo.0
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.EcNo.1
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.EcNo.2
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.EcNo.3
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.EcNo.4
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.EcNo.5
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.EcNo.6
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.EcNo.7
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.EcNo.8
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
Worse.EcNo.Ratio
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
EcNo.0
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
EcNo.1
None
RRC MR
Measuremen
t <per Cell>
MR
Report
EcNo
Segment
Ratio
Issue 01 (2016-09-15)
Formula
644
PRS
Performance Report Reference
Subrep
ort
Name
Mean
SHO
EcNo
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.Periodic.MrRpt.
EcNo.2
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
EcNo.3
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
EcNo.4
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
EcNo.5
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
EcNo.6
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
EcNo.7
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
EcNo.8
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.MrRpt.SH
O.EcNo
dB
RRC MR
Measuremen
t <per Cell>
VS.EcNo.Cum.SHO
dB
RRC MR
Measuremen
t <per Cell>
VS.EcNo.MrRpt.Cu
m.SHO
None
RRC MR
Measuremen
t <per Cell>
TP Analysis Report
NE Type
3GRNC
Object Type
UCell
Issue 01 (2016-09-15)
645
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
TP
Segment
Ratio
VS.TP.UE.Worse.Ra
tio
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.TP.UE.0
None
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.TP.UE.1
None
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.TP.UE.2
None
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.TP.UE.3
None
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.TP.UE.4
None
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.TP.UE.5
None
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.TP.UE.6.9
None
RRC
Connection
Setup
Measuremen
t <per Cell>
Formula
646
PRS
Performance Report Reference
Subrep
ort
Name
Mean
RSCP vs.
TP
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.TP.UE.16.25
None
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.TP.UE.26.35
None
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.TP.UE.36.55
None
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.TP.UE.More55
None
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.TP.UE.10.15
None
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.RSCP.Mean.TP0
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.Mean.TP1
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.Mean.TP2
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.Mean.TP3
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.Mean.TP4
dBm
RRC MR
Measuremen
t <per Cell>
647
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RSCP.Mean.TP5
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.Mean.TP6
.9
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.Mean.TP1
0.15
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.Mean.TP1
6.25
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.Mean.TP2
6.35
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.Mean.TP3
6.55
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.Mean.TP.
More55
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.cum.TP0
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.cum.TP1
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.cum.TP2
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.cum.TP3
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.cum.TP4
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.cum.TP5
dBm
RRC MR
Measuremen
t <per Cell>
648
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RSCP.cum.TP6.
9
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.cum.TP10
.15
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.cum.TP16
.25
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.cum.TP26
.35
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.cum.TP36
.55
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.cum.TP.M
ore55
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.sample.TP
0
None
RRC MR
Measuremen
t <per Cell>
VS.RSCP.sample.TP
1
None
RRC MR
Measuremen
t <per Cell>
VS.RSCP.sample.TP
2
None
RRC MR
Measuremen
t <per Cell>
VS.RSCP.sample.TP
3
None
RRC MR
Measuremen
t <per Cell>
VS.RSCP.sample.TP
4
None
RRC MR
Measuremen
t <per Cell>
VS.RSCP.sample.TP
5
None
RRC MR
Measuremen
t <per Cell>
VS.RSCP.sample.TP
6.9
None
RRC MR
Measuremen
t <per Cell>
649
PRS
Performance Report Reference
Subrep
ort
Name
Mean
EcNo vs.
TP
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RSCP.sample.TP
10.15
None
RRC MR
Measuremen
t <per Cell>
VS.RSCP.sample.TP
16.25
None
RRC MR
Measuremen
t <per Cell>
VS.RSCP.sample.TP
26.35
None
RRC MR
Measuremen
t <per Cell>
VS.RSCP.sample.TP
36.55
None
RRC MR
Measuremen
t <per Cell>
VS.RSCP.sample.TP
.More55
None
RRC MR
Measuremen
t <per Cell>
VS.EcNo.Mean.TP0
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP1
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP2
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP3
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP4
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
650
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.EcNo.Mean.TP5
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP6
.9
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP1
0.15
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP1
6.25
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP2
6.35
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP3
6.55
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP.
More55
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP0
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
651
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.EcNo.Cum.TP1
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP10
.15
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP16
.25
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP2
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP26
.35
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP3
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP36
.55
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP4
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
652
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.EcNo.Cum.TP5
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP6.
9
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP.M
ore55
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
Formula
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
UE
TxPower
Segment
Ratio
VS.Periodic.MrRpt.
UETxPower.Worse.
Ratio
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.0
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.1
None
RRC MR
Measuremen
t <per Cell>
653
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.Periodic.MrRpt.
UETxPower.2
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.3
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.4
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.5
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.6
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.7
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.8
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.9
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.10
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.11
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.12
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.13
None
RRC MR
Measuremen
t <per Cell>
654
PRS
Performance Report Reference
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Cell
Load
Analysis
VS.MeanTCP
dBm
TX and RX
Power
Measuremen
t <per Cell>
VS.MaxTCP
dBm
TX and RX
Power
Measuremen
t <per Cell>
VS.MinTCP
dBm
TX and RX
Power
Measuremen
t <per Cell>
VS.MeanRTWP
dBm
TX and RX
Power
Measuremen
t <per Cell>
VS.MaxRTWP
dBm
TX and RX
Power
Measuremen
t <per Cell>
VS.MinRTWP
dBm
TX and RX
Power
Measuremen
t <per Cell>
655
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
EcNo
Segment
Ratio
VS.RRC.Access.Wo
rse.EcNo.Ratio
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.Ec
No.0
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.Ec
No.1
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.Ec
No.2
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.Ec
No.3
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.Ec
No.4
None
RRC MR
Measuremen
t <per Cell>
656
PRS
Performance Report Reference
Subrep
ort
Name
Cell
Update
EcNo
Segment
Ratio
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.Access.Ec
No.5
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.Ec
No.6
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.Ec
No.7
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.Ec
No.8
None
RRC MR
Measuremen
t <per Cell>
VS.Cell.Updt.Worse.
EcNo.Ratio
RRC MR
Measuremen
t <per Cell>
VS.Cell.Updt.EcNo.
0
None
RRC MR
Measuremen
t <per Cell>
VS.Cell.Updt.EcNo.
1
None
RRC MR
Measuremen
t <per Cell>
VS.Cell.Updt.EcNo.
2
None
RRC MR
Measuremen
t <per Cell>
VS.Cell.Updt.EcNo.
3
None
RRC MR
Measuremen
t <per Cell>
VS.Cell.Updt.EcNo.
4
None
RRC MR
Measuremen
t <per Cell>
VS.Cell.Updt.EcNo.
5
None
RRC MR
Measuremen
t <per Cell>
VS.Cell.Updt.EcNo.
6
None
RRC MR
Measuremen
t <per Cell>
VS.Cell.Updt.EcNo.
7
None
RRC MR
Measuremen
t <per Cell>
657
PRS
Performance Report Reference
Subrep
ort
Name
SHO
EcNo
Segment
Ratio
MR
Report
EcNo
Segment
Ratio
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.Cell.Updt.EcNo.
8
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.Worse.EcN
o.Ratio
RRC MR
Measuremen
t <per Cell>
VS.SHO.EcNo.0
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.EcNo.1
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.EcNo.2
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.EcNo.3
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.EcNo.4
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.EcNo.5
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.EcNo.6
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.EcNo.7
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.EcNo.8
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
Worse.EcNo.Ratio
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
EcNo.0
None
RRC MR
Measuremen
t <per Cell>
658
PRS
Performance Report Reference
Subrep
ort
Name
Mean
SHO
EcNo
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.Periodic.MrRpt.
EcNo.1
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
EcNo.2
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
EcNo.3
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
EcNo.4
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
EcNo.5
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
EcNo.6
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
EcNo.7
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
EcNo.8
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.MrRpt.SH
O.EcNo
dB
RRC MR
Measuremen
t <per Cell>
VS.EcNo.Cum.SHO
dB
RRC MR
Measuremen
t <per Cell>
VS.EcNo.MrRpt.Cu
m.SHO
None
RRC MR
Measuremen
t <per Cell>
659
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
RSCP
Segment
Ratio
VS.RRC.Access.Wo
rse.RSCP.Ratio
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.RS
CP.0
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.RS
CP.1
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.RS
CP.2
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.RS
CP.3
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.RS
CP.4
None
RRC MR
Measuremen
t <per Cell>
660
PRS
Performance Report Reference
Subrep
ort
Name
SHO
RSCP
Segment
Ratio
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.Access.RS
CP.5
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.RS
CP.6
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.RS
CP.7
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.RS
CP.8
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.Access.RS
CP.9
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.Worse.RSC
P.Ratio
RRC MR
Measuremen
t <per Cell>
VS.SHO.RSCP.0
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.RSCP.1
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.RSCP.2
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.RSCP.3
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.RSCP.4
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.RSCP.5
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.RSCP.6
None
RRC MR
Measuremen
t <per Cell>
661
PRS
Performance Report Reference
Subrep
ort
Name
MR
Report
RSCP
Segment
Ratio
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.SHO.RSCP.7
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.RSCP.8
None
RRC MR
Measuremen
t <per Cell>
VS.SHO.RSCP.9
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
Worse.RSCP.Ratio
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
RSCP.0
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
RSCP.1
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
RSCP.2
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
RSCP.3
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
RSCP.4
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
RSCP.5
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
RSCP.6
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
RSCP.7
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
RSCP.8
None
RRC MR
Measuremen
t <per Cell>
662
PRS
Performance Report Reference
Subrep
ort
Name
Mean
SHO
RSCP
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.Periodic.MrRpt.
RSCP.9
None
RRC MR
Measuremen
t <per Cell>
VS.RRC.MrRpt.SH
O.RSCP
None
RRC MR
Measuremen
t <per Cell>
VS.MrRpt.Cum.SH
O
None
RRC MR
Measuremen
t <per Cell>
VS.RSCP.Cum.SHO
dBm
RRC MR
Measuremen
t <per Cell>
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell
Issue 01 (2016-09-15)
663
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TP
Segment
Ratio
VS.TP.UE.Worse.Ra
tio
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.TP.UE.0
None
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.TP.UE.1
None
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.TP.UE.2
None
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.TP.UE.3
None
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.TP.UE.4
None
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.TP.UE.5
None
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.TP.UE.6.9
None
RRC
Connection
Setup
Measuremen
t <per Cell>
664
PRS
Performance Report Reference
Subrep
ort
Name
Mean
RSCP vs.
TP
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.TP.UE.16.25
None
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.TP.UE.26.35
None
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.TP.UE.36.55
None
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.TP.UE.More55
None
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.TP.UE.10.15
None
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.RSCP.Mean.TP0
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.Mean.TP1
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.Mean.TP2
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.Mean.TP3
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.Mean.TP4
dBm
RRC MR
Measuremen
t <per Cell>
665
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RSCP.Mean.TP5
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.Mean.TP6
.9
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.Mean.TP1
0.15
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.Mean.TP1
6.25
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.Mean.TP2
6.35
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.Mean.TP3
6.55
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.Mean.TP.
More55
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.cum.TP0
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.cum.TP1
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.cum.TP2
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.cum.TP3
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.cum.TP4
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.cum.TP5
dBm
RRC MR
Measuremen
t <per Cell>
666
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RSCP.cum.TP6.
9
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.cum.TP10
.15
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.cum.TP16
.25
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.cum.TP26
.35
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.cum.TP36
.55
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.cum.TP.M
ore55
dBm
RRC MR
Measuremen
t <per Cell>
VS.RSCP.sample.TP
0
None
RRC MR
Measuremen
t <per Cell>
VS.RSCP.sample.TP
1
None
RRC MR
Measuremen
t <per Cell>
VS.RSCP.sample.TP
2
None
RRC MR
Measuremen
t <per Cell>
VS.RSCP.sample.TP
3
None
RRC MR
Measuremen
t <per Cell>
VS.RSCP.sample.TP
4
None
RRC MR
Measuremen
t <per Cell>
VS.RSCP.sample.TP
5
None
RRC MR
Measuremen
t <per Cell>
VS.RSCP.sample.TP
6.9
None
RRC MR
Measuremen
t <per Cell>
667
PRS
Performance Report Reference
Subrep
ort
Name
Mean
EcNo vs.
TP
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RSCP.sample.TP
10.15
None
RRC MR
Measuremen
t <per Cell>
VS.RSCP.sample.TP
16.25
None
RRC MR
Measuremen
t <per Cell>
VS.RSCP.sample.TP
26.35
None
RRC MR
Measuremen
t <per Cell>
VS.RSCP.sample.TP
36.55
None
RRC MR
Measuremen
t <per Cell>
VS.RSCP.sample.TP
.More55
None
RRC MR
Measuremen
t <per Cell>
VS.EcNo.Mean.TP0
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP1
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP2
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP3
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP4
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
668
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.EcNo.Mean.TP5
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP6
.9
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP1
0.15
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP1
6.25
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP2
6.35
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP3
6.55
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Mean.TP.
More55
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP0
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
669
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.EcNo.Cum.TP1
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP10
.15
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP16
.25
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP2
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP26
.35
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP3
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP36
.55
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP4
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
670
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.EcNo.Cum.TP5
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP6.
9
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
VS.EcNo.Cum.TP.M
ore55
dB
RRC
Connection
Setup
Measuremen
t <per Cell>
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell
Issue 01 (2016-09-15)
671
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
UE
TxPower
Segment
Ratio
VS.Periodic.MrRpt.
UETxPower.Worse.
Ratio
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.0
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.1
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.2
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.3
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.4
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.5
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.6
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.7
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.8
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.9
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.10
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.11
None
RRC MR
Measuremen
t <per Cell>
672
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.Periodic.MrRpt.
UETxPower.12
None
RRC MR
Measuremen
t <per Cell>
VS.Periodic.MrRpt.
UETxPower.13
None
RRC MR
Measuremen
t <per Cell>
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accessib
ility
IU Paging Success
Ratio
Measuremen
t related to
Paging per
RNC
[VS.RANAP.Paging.Succ.Idle
UE]/
[VS.RANAP.Paging.Att.IdleU
E]*{100}
673
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Radio Access
Success Ratio
RRC
connection
setup
measurement
per cell
(([RRC.SuccConnEstab.OgCo
nvCall]+
[RRC.SuccConnEstab.OrgStr
Call]+
[RRC.SuccConnEstab.OrgItrC
all]+
[RRC.SuccConnEstab.OrgBkg
Call]+
[RRC.SuccConnEstab.OrgSub
Call]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrC
all]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCa
ll]+
[RRC.SuccConnEstab.Unkow
n]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallRe
Est]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig])/
([RRC.AttConnEstab.OrgCon
vCall]+
[RRC.AttConnEstab.OrgStrCa
ll]+
[RRC.AttConnEstab.OrgInter
Call]+
[RRC.AttConnEstab.OrgBkgC
all]+
[RRC.AttConnEstab.OgSubC
all]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInter
Call]+
674
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100})*(([VS.RAB.Suc
cEstabCS.Conv]+
[VS.RAB.SuccEstabCS.Str])+
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg]))
/
(([VS.RAB.AttEstabCS.Conv]
+[VS.RAB.AttEstabCS.Str])+
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]))
RRC Setup Success
Ratio(other)
Issue 01 (2016-09-15)
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.IRAT
CelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
)/
([RRC.AttConnEstab.IRATCe
lRes]+
[RRC.AttConnEstab.IRATCC
O]+[RRC.AttConnEstab.Reg]
+
[RRC.AttConnEstab.Detach]
)*{100}
675
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OgCo
nvCall]+
[RRC.SuccConnEstab.OrgStr
Call]+
[RRC.SuccConnEstab.OrgItrC
all]+
[RRC.SuccConnEstab.OrgBkg
Call]+
[RRC.SuccConnEstab.OrgSub
Call]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrC
all]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCa
ll]+
[RRC.SuccConnEstab.Unkow
n]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallRe
Est]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig])/
([RRC.AttConnEstab.OrgCon
vCall]+
[RRC.AttConnEstab.OrgStrCa
ll]+
[RRC.AttConnEstab.OrgInter
Call]+
[RRC.AttConnEstab.OrgBkgC
all]+
[RRC.AttConnEstab.OgSubC
all]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInter
Call]+
676
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100}
Issue 01 (2016-09-15)
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*{1
00}
VP RAB Setup
Success Ratio
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100}
PS RAB Setup
Success Ratio
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*{
100}
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]
/
[VS.HSDPA.RAB.AttEstab
]*{100}
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.SuccEstab]
/
[VS.HSUPA.RAB.AttEstab
]*{100}
677
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Coverage
Soft
Handover
Measuremen
t per RNC
(([VS.SHO.AS.1]+
([VS.SHO.AS.2Softer]+
[VS.SHO.AS.2Soft])*{2}+
([VS.SHO.AS.3Softer]+
[VS.SHO.AS.3Soft]+
[VS.SHO.AS.
3Soft2Softer])*{3})/
([VS.SHO.AS.1]+
[VS.SHO.AS.2Softer]+
[VS.SHO.AS.2Soft]+
[VS.SHO.AS.3Softer]+
[VS.SHO.AS.3Soft]+
[VS.SHO.AS.3Soft2Softer]){1})*{100}
678
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Mobility
Soft Handover
Success Ratio(RNC)
Soft
Handover
Measuremen
t per RNC
[VS.SHO.Succ]/
[VS.SHO.Att.RNC]*{100}
HS-DSCH Service
Cell Change Success
Ratio with SHO
(HSDPA to HSDPA)
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.Su
ccOut]/
[VS.HSDPA.SHO.CellChg.At
tOut]*{100}
Inter-frequency Hard
Handover Success
Ratio
Hard
Handover
Measuremen
t per RNC
[VS.HHO.InterFreq.Succ.RN
C]/
[VS.HHO.InterFreq.Att.RNC
]*{100}
Inter-frequency Hard
Handover Success
Ratio (HSDPA to
HSDPA)
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInt
erFreq]/
[VS.HSDPA.HHO.AttOutInte
rFreq]*{100}
679
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
CS Inter-RAT
Handover Success
Ratio (WCDMA to
GSM)(RNC)
Measuremen
t related to
CS IRA
handover per
RNC
[VS.IRATHO.SuccCSOut.RN
C]/
[VS.IRATHO.AttCSOut.RNC
]*{100}
PS Inter-RAT
Handover Success
Ratio (WCDMA to
GPRS)(RNC)
Measuremen
t related to
PS IRA
handover per
RNC
[VS.IRATHO.SuccPSOutUTR
AN.RNC]/
[VS.IRATHO.AttPSOutUTR
AN.RNC]*{100}
HSDPA Inter-RAT
Handover Success
Ratio (WCDMA to
GPRS)
InterRAT
Handover
Measuremen
t per cell
[VS.IRATHO.HSDPA.SuccO
utPSUTRAN]/
[VS.IRATHO.HSDPA.AttOut
PSUTRAN]*{100}
TRNC Relocation
Success Ratio
Measuremen
t of
relocation
per DRNC
([VS.TRELOC.SuccExec.UEI
nv]+
[VS.TRELOC.SuccExec.UEN
otInv])/
([VS.TRELOC.AttPrep.UEInv
]+
[VS.TRELOC.AttPrep.UENo
nInv])*{100}
E-DCH Soft
Handover Success
Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.EDCH.SHO.Suc
c]/
[VS.HSUPA.EDCH.SHO.Att
]*{100}
HSUPA
Measuremen
t per cell
[VS.HSUPA.SHO.ServCellCh
g.Succ]/
[VS.HSUPA.SHO.ServCellCh
g.Att]*{100}
HSUPA
Measuremen
t per cell
[VS.HSUPA.HHO.InterFreq.
NoChR.Succ]/
[VS.HSUPA.HHO.InterFreq.
NoChR.Att]*{100}
E-DCH to DCH
Handover Success
Ratio (with Inter
HHO)
HSUPA
Measuremen
t per cell
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]/
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Att]*{100}
HSUPA Inter-RAT
Handover Success
Ratio (UTRAN to
GPRS)
InterRAT
Handover
Measuremen
t per cell
[VS.HSUPA.IRATHO.SuccO
utPSUTRAN]/
[VS.HSUPA.IRATHO.AttOut
PSUTRAN]*{100}
680
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Retainabi
lity
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100}
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.Norm.Rel.CS.Conv.RB.
64]+
[VS.RAB.Loss.CS.Conv64K]
)*{100}
PS Service Drop
Ratio
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*{1
00}
681
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA Service
Drop Ratio
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.RAB.Loss.InActi
vity])*{100}
HSUPA Service
Drop Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnor
m]/
([VS.HSUPA.RAB.Loss.Abno
rm]+
[VS.HSUPA.RAB.Loss.Norm
])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Issue 01 (2016-09-15)
682
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
CS Equivalent
Traffic
Erl
Traffic
Measuremen
t per RNC
[VS.CSLoad.Erlang.Equiv.RN
C]
PS UL Throughput
kbit/s
Traffic
Measuremen
t per RNC
[VS.PSLoad.ULThruput.RNC
]
PS DL Throughput
kbit/s
Traffic
Measuremen
t per RNC
[VS.PSLoad.DLThruput.RNC
]
AMR12.2KDL_Erl(
Cell)
Erl
Measuremen
t of RB
Procedure
per cell
[VS.AMR.Ctrl.DL12.2]
CSConv64KDL_Er
l(Cell)
Erl
Measuremen
t of RB
Procedure
per cell
[VS.RB.DLConvCS.64]
HSDPA Mean UE
number
numb
er
HSDPA
Measuremen
t per cell
[VS.HSDPA.UE.Mean.Cell]
byte
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]
HSUPA Mean UE
number
numb
er
HSUPA
Measuremen
t per cell
[VS.HSUPA.UE.Mean.Cell]
byte
HSUPA
Measuremen
t per cell
[VS.HSUPA.MeanChThrough
put.TotalBytes]
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
683
PRS
Performance Report Reference
NE Type
RNC
Object Type
RNC
Issue 01 (2016-09-15)
684
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accessab
ility
RRC Connection
Establishment
Success Rate
(Service)
none
RRC
connection
setup
measurement
per cell
(([RRC.SuccConnEstab.OgCo
nvCall]+
[RRC.SuccConnEstab.OrgStr
Call]+
[RRC.SuccConnEstab.OrgItrC
all]+
[RRC.SuccConnEstab.OrgBkg
Call]+
[RRC.SuccConnEstab.OrgSub
Call]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrC
all]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig]+
[RRC.SuccConnEstab.CallRe
Est]+
[RRC.SuccConnEstab.EmgCa
ll]+
[RRC.SuccConnEstab.Unkow
n]))/
(([RRC.AttConnEstab.OrgCon
vCall]+
[RRC.AttConnEstab.OrgStrCa
ll]+
[RRC.AttConnEstab.OrgInter
Call]+
[RRC.AttConnEstab.OrgBkgC
all]+
[RRC.AttConnEstab.OgSubC
all]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInter
685
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Call]+
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]))
Issue 01 (2016-09-15)
RRC Connection
Establishment
Success Rate (Other)
none
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.IRAT
CelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
)/
([RRC.AttConnEstab.IRATCe
lRes]+
[RRC.AttConnEstab.IRATCC
O]+[RRC.AttConnEstab.Reg]
+
[RRC.AttConnEstab.Detach])
RAB Establishment
Success Rate - CS
none
Measuremen
t of CS RAB
assignment
setup per
RNC
([VS.RAB.SuccEstab.AMR.S
PU]+
[VS.RAB.SuccEstCS.Conv.
64.SPU])/
([VS.RAB.AttEstab.AMR.PL
MN.RNC]+
[VS.RAB.AttEstCS.Conv.64])
686
PRS
Performance Report Reference
Subrep
ort
Name
Retainabi
lity
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
RAB Establishment
Success Rate-PS
none
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])
RAB Establishment
Success RateHSDPA
none
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.SuccEstab
])/
([VS.HSDPA.RAB.AttEstab])
RAB Establishment
Success RateHSUPA
none
HSUPA
Measuremen
t per cell
([VS.HSUPA.RAB.SuccEstab
])/
([VS.HSUPA.RAB.AttEstab])
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.CS.AMR])/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.CS.Conv64K]
)/
([VS.Norm.Rel.CS.Conv.RB.
64]+
[VS.RAB.Loss.CS.Conv64K])
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])
687
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
none
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.Nor
m]+
[VS.HSDPA.RAB.Loss.InActi
vity]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.Succ
OutIntraFreq]+
[VS.HSDPA.HHO.H2D.Succ
OutInterFreq])
none
HSDPA
Measuremen
t per cell
([VS.HSUPA.RAB.Loss.Abno
rm])/
([VS.HSUPA.RAB.Loss.Abno
rm]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ])
688
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
none
RRC
connection
release
measurement
per cell
(([RRC.AttConnRelDCCH.Co
ngestion]+
[RRC.AttConnRelCCCH.Con
gestion]+
[RRC.AttConnRelDCCH.ReE
stRej]+
[RRC.AttConnRelCCCH.ReE
stRej]+
[RRC.AttConnRelDCCH.Uns
pec]+
[RRC.AttConnRelCCCH.Uns
pec][VS.RAB.Loss.CS.Abnorm][VS.RAB.Loss.CS.RF][VS.RAB.Loss.PS.RF][VS.RAB.Loss.PS.Abnorm]))/
(([RRC.AttConnRelDCCH.No
rmRel]+
[RRC.AttConnRelCCCH.Nor
mRel]+
[RRC.AttConnRelDCCH.Con
gestion]+
[RRC.AttConnRelCCCH.Con
gestion]+
[RRC.AttConnRelDCCH.Pree
mpt]+
[RRC.AttConnRelCCCH.Pree
mpt]+
[RRC.AttConnRelDCCH.ReE
stRej]+
[RRC.AttConnRelCCCH.ReE
stRej]+
[RRC.AttConnRelDCCH.Sig
ConReEst]+
[RRC.AttConnRelCCCH.Sig
ConReEst]+
[RRC.AttConnRelDCCH.UsrI
nact]+
[RRC.AttConnRelCCCH.UsrI
nact]+
[RRC.AttConnRelDCCH.Uns
pec]+
[RRC.AttConnRelCCCH.Uns
pec]))
689
PRS
Performance Report Reference
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Mobility
Soft Handover
Success Rate
none
Soft
Handover
Measuremen
t per cell
([VS.SoHO.ASU.SuccRLAdd
]+
[VS.SoHO.ASU.SuccRlDel]+
[SHO.SuccRLAddUESide]+
[SHO.SuccRLDelUESide])/
([VS.SoHO.ASU.AttRLAdd]+
[VS.SoHO.ASU.AttRlDel]+
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide])
Intra-Frequency
Hard Handover
Success Rate
none
Hard
Handover
Measuremen
t per cell
([VS.HHO.SuccOutIntraNode
BIntraFreq]+
[VS.HHO.SuccOutInterNodeBIntraRNCIntraFreq]+
[VS.HHO.SuccOutInterRNCI
ntraFreqIur])/
([VS.HHO.AttOutIntraNodeBIntraFreq]+
[VS.HHO.AttOutInterNodeBIntraRNCIntraFreq]+
[VS.HHO.AttOutInterRNCIntraFreqIur])
Inter-Frequency
Hard Handover
Success RateCS&/PS
none
Hard
Handover
Measuremen
t per cell
([VS.HHO.InterFreq.SuccOut]
)/
([VS.HHO.InterFreq.AttOut])
Inter-Frequency
Hard Handover
Success Rate-intraRNC
none
Hard
Handover
Measuremen
t per cell
([VS.HHO.SuccOutIntraNode
BInterFreq]+
[VS.HHO.SuccOutInterNodeBIntraRNCInterFreq])/
([VS.HHO.AttOutIntraNodeBInterFreq]+
[VS.HHO.AttOutInterNodeBIntraRNCInterFreq])
Inter-Frequency
Hard Handover
Success Rate-interRNC
none
Hard
Handover
Measuremen
t per cell
[VS.HHO.SuccOutInterRNCI
nterFreqIur]/
[VS.HHO.AttOutInterRNCInterFreqIur]
none
HSDPA
Measuremen
t per cell
([VS.HSDPA.SHO.CellChg.S
uccOut])/
([VS.HSDPA.SHO.CellChg.A
ttOut])
690
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInt
raFreq]/
[VS.HSDPA.HHO.AttOutIntr
aFreq]
none
HSDPA
Measuremen
t per cell
([VS.HSDPA.HHO.SuccOutIn
terFreq])/
([VS.HSDPA.HHO.AttOutInt
erFreq])
none
HSUPA
Measuremen
t per cell
([VS.HSUPA.SHO.ServCellC
hg.Succ])/
([VS.HSUPA.SHO.ServCellC
hg.Att])
none
HSUPA
Measuremen
t per cell
([VS.HSUPA.HHO.IntraFreq.
NoChR.Succ])/
([VS.HSUPA.HHO.IntraFreq.
NoChR.Att])
none
HSUPA
Measuremen
t per cell
([VS.HSUPA.HHO.InterFreq.
NoChR.Succ])/
([VS.HSUPA.HHO.InterFreq.
NoChR.Att])
Handover Success
Rate (3G to 2G)Voice
none
InterRAT
Handover
Measuremen
t per cell
([IRATHO.SuccOutCS])/
([IRATHO.AttOutCS])
Handover Success
Rate (3G to 2G)-PS
none
InterRAT
Handover
Measuremen
t per cell
([IRATHO.SuccOutPSUTRA
N])/
([IRATHO.AttOutPSUTRAN]
)
Handover Success
Rate (3G to 2G)HSDPA
none
InterRAT
Handover
Measuremen
t per cell
[VS.IRATHO.HSDPA.SuccO
utPSUTRAN]/
[VS.IRATHO.HSDPA.AttOut
PSUTRAN]
Handover Success
Rate (3G to 2G)HSUPA
none
InterRAT
Handover
Measuremen
t per cell
[VS.HSUPA.IRATHO.SuccO
utPSUTRAN]/
[VS.HSUPA.IRATHO.AttOut
PSUTRAN]
691
PRS
Performance Report Reference
Subrep
ort
Name
Traffic
Availabil
ity
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Handover Success
Rate (2G to 3G)Voice
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccIncCS]/
[VS.IRATHO.PrepSuccCSIn]
Handover Success
Rate (2G to 3G)-PS
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Cell
Res]/
[VS.RRC.AttConnEstab.CellR
es]
CS Traffic (Erl)
none
Traffic
Measuremen
t per RNC
[VS.CSLoad.Erlang.Equiv.RN
C]
R99 PS DL
Throughput(kbit)
none
Traffic
Measuremen
t per RNC
[VS.PSLoad.kbits.DL.0.32]+
[VS.PSLoad.kbits.DL.32.64]+
[VS.PSLoad.kbits.DL.
64.144]+
[VS.PSLoad.kbits.DL.
144.384]
R99 PS UL
Throughput(kbit)
none
Traffic
Measuremen
t per RNC
[VS.PSLoad.kbits.UL.0.32]+
[VS.PSLoad.kbits.UL.32.64]+
[VS.PSLoad.kbits.UL.
64.144]+
[VS.PSLoad.kbits.UL.
144.384]
HSDPA
Throughput(kbit)
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]*{8}/{1000}
HSUPA Throughput
(kbit)
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.MeanChThrough
put.TotalBytes]*{8}/{1000}
MBMS
Throughput(kbit)
none
Traffic
Measuremen
t per RNC
[VS.MBMSPSLoad.DLThrup
ut.RNC]*{GP}*{60}
Code Usage
none
Measuremen
t of multiRAB service
per cell
[VS.RAB.SFOccupy]/{256}
TCP Usage
none
Cell TX and
RX Power
Measuremen
t per cell
[VS.MeanTCP]
692
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS Call
Drop
Cells
VS.CS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm]
VS.RAB.Loss.CS
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm]+
[VS.RAB.Loss.CS.Norm]
693
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.RelReqCS.
OM
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqCS.
RABPreempt
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqCS.
UTRANgen
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.RLCRst
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.ULSync
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.UuNoReply
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.Oth
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
694
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.CS.A
al2Loss
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.Call.Drop.CS.Ot
her
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Abnorm][VS.RAB.RelReqCS.OM][VS.RAB.RelReqCS.UTRAN
gen][VS.RAB.RelReqCS.RABPre
empt][VS.RAB.Loss.CS.Aal2Loss]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Issue 01 (2016-09-15)
695
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS RAB
Fail
VS.RAB.FailEstabC
S.Cell
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.AttEstabCS.Conv]+
[VS.RAB.AttEstabCS.Str][VS.RAB.SuccEstabCS.Conv]
-[VS.RAB.SuccEstabCS.Str]
VS.RAB.AttEstabC
S.Cell
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.AttEstabCS.Conv]+
[VS.RAB.AttEstabCS.Str]
VS.RAB.FailEstabC
S.TNL
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCS.
Relo
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCS.
RIPFail
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
Power.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
ULCE.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
DLCE.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
696
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstCs.
Code.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.I
UB.Band
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstabC
S.Unsp.Other
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
[VS.RAB.FailEstCS.Unsp][VS.RAB.FailEstabCS.Cong]
VS.RAB.FailEstabC
S.RNL.Other
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
[VS.RAB.FailEstabCS.RNL][VS.RAB.FailEstCS.Relo][VS.RAB.FailEstCS.RIPFail][VS.RAB.FailEstabCS.Cong]
VS.RAB.FailEstabC
S.Other.Cell
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
([VS.RAB.AttEstabCS.Conv]
+[VS.RAB.AttEstabCS.Str][VS.RAB.SuccEstabCS.Conv]
-[VS.RAB.SuccEstabCS.Str])[VS.RAB.FailEstabCS.RNL][VS.RAB.FailEstabCS.TNL]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Issue 01 (2016-09-15)
697
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS Call
Drop
Cells
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
VS.RAB.Loss.PS
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm]
VS.RAB.RelReqPS.
OM
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqPS.
RABPreempt
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqPS.
UTRANgen
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
698
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.PS.R
F.RLCRst
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.ULSync
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.UuNoReply
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.Oth
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.G
TPULoss
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.Call.Drop.PS.Ot
her
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.Abnorm][VS.RAB.RelReqPS.OM][VS.RAB.RelReqPS.RABPree
mpt][VS.RAB.Loss.PS.GTPULoss
]
699
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS RAB
Fail
VS.RAB.FailEstabP
S.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
VS.RAB.FailEstPS.
TNL
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
700
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstPS.
RIPFail
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
Par
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
Relo
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.P
ower.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
Code.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
ULCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
DLCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.I
UB.Band
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
701
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstabP
S.Unsp.Other
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.FailEstPS.Unsp][VS.RAB.FailEstPs.Power.Co
ng][VS.RAB.FailEstPs.Code.Con
g][VS.RAB.FailEstPs.ULCE.Co
ng][VS.RAB.FailEstPs.DLCE.Co
ng][VS.RAB.FailEstPs.IUB.Band
]
VS.RAB.FlEstPS.R
NL.Other
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
[VS.RAB.FailEstPS.RNL][VS.RAB.FailEstPS.RIPFail][VS.RAB.FailEstPS.Par][VS.RAB.FailEstPS.Relo][VS.RAB.FailEstPS.Unsp]
VS.RAB.FailEstabP
S.Other.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
(([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg]))
-[VS.RAB.FailEstPS.TNL][VS.RAB.FailEstPS.RNL]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Issue 01 (2016-09-15)
702
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC Fail
VS.RRC.FailConnE
stab.Cell
times
RRC
connection
setup
measurement
per cell
[VS.RRC.AttConnEstab.Cell][RRC.SuccConnEstab.sum]
VS.RRC.AttConnEs
tab.Cell
times
RRC
connection
setup
measurement
per cell
VS.RRC.Rej.RL.Fai
l
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.TNL.F
ail
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Power.
Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.UL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.DL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
703
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.Rej.Code.C
ong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Other.
Cong
times
RRC
connection
reject
measurement
per cell
[RRC.FailConnEstab.Cong][VS.RRC.Rej.Power.Cong][VS.RRC.Rej.Code.Cong][VS.RRC.Rej.UL.CE.Cong][VS.RRC.Rej.DL.CE.Cong]
RRC.FailConnEstab.
NoReply
times
RRC
connection
reject
measurement
per cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GU
Object Type
UCell Group
Issue 01 (2016-09-15)
704
PRS
Performance Report Reference
Subreport Information
Subrepo
rt Name
MultiSector
Chain
Report
Counter
VS.Periodic.MrRpt.RSCP.0
VS.Periodic.MrRpt.RSCP.1
VS.Periodic.MrRpt.RSCP.2
VS.Periodic.MrRpt.RSCP.3
VS.Periodic.MrRpt.RSCP.4
VS.Periodic.MrRpt.RSCP.5
Issue 01 (2016-09-15)
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
705
PRS
Performance Report Reference
Subrepo
rt Name
Counter
VS.Periodic.MrRpt.RSCP.6
VS.Periodic.MrRpt.RSCP.7
VS.Periodic.MrRpt.RSCP.8
VS.Periodic.MrRpt.RSCP.9
VS.Periodic.MrRpt.EcNo.0
VS.Periodic.MrRpt.EcNo.1
VS.Periodic.MrRpt.EcNo.2
Issue 01 (2016-09-15)
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
706
PRS
Performance Report Reference
Subrepo
rt Name
Counter
VS.Periodic.MrRpt.EcNo.3
VS.Periodic.MrRpt.EcNo.4
VS.Periodic.MrRpt.EcNo.5
VS.Periodic.MrRpt.EcNo.6
VS.Periodic.MrRpt.EcNo.7
VS.Periodic.MrRpt.EcNo.8
Issue 01 (2016-09-15)
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
707
PRS
Performance Report Reference
Subrepo
rt Name
Counter
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
No
ne
Soft
Hando
ver
Measu
rement
per cell
(([VS.SHO.AS.1RL]+
[VS.SHO.AS.2RL]+
[VS.SHO.AS.3RL]+
[VS.SHO.AS.4RL]+
[VS.SHO.AS.5RL]+
[VS.SHO.AS.6RL])/
([VS.SHO.AS.1RL]+
[VS.SHO.AS.2RL]/
{2}+[VS.SHO.AS.
3RL]/{3}+
[VS.SHO.AS.4RL]/
{4}+[VS.SHO.AS.
5RL]/{5}+
[VS.SHO.AS.6RL]/
{6}))-{1}
Soft
Hando
ver
Measu
rement
per cell
([SHO.SuccRLAddUE
Side]+
[SHO.SuccRLDelUESi
de])/
([SHO.AttRLAddUESi
de]+
[SHO.AttRLDelUESide
])*{100.00}
nu
mb
er
HSDP
A
Measu
rement
per cell
HSDP
A
Measu
rement
per cell
TX
and
RX
Power
Measu
rement
<per
Cell>
VS.SHO.Factor.RL.Cell
VS.SHO.Success.Cell.Rate
VS.HSDPA.UE.Mean.Cell
VS.HSDPA.MeanChThroughput.T
otalBytes
byt
e
dB
m
VS.MeanRTWP
Issue 01 (2016-09-15)
708
PRS
Performance Report Reference
Subrepo
rt Name
Counter
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
dB
m
TX
and
RX
Power
Measu
rement
<per
Cell>
nu
mb
er
HSUP
A
Measu
rement
per cell
byt
e
HSUP
A
Measu
rement
per cell
RRC
MR
Measu
rement
<per
Cell>
CS Radio Access
Success Rate = RRC
Connection
Establishment Success
Rate x CS RAB
Establishment Success
Rate x 100%
RRC
MR
Measu
rement
<per
Cell>
RRC
MR
Measu
rement
<per
Cell>
VS.MinRTWP
VS.HSUPA.UE.Mean.Cell
VS.HSUPA.MeanChThroughput.T
otalBytes
Issue 01 (2016-09-15)
709
PRS
Performance Report Reference
Subrepo
rt Name
Counter
Co
un
ter
Un
it
Functi
on
Subse
t
RRC
MR
Measu
rement
<per
Cell>
Soft
Hando
ver
Measu
rement
per cell
Formula
([SHO.SuccRLAddUE
Side]+
[SHO.SuccRLDelUESi
de])/
([SHO.AttRLAddUESi
de]+
[SHO.AttRLDelUESide
])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GU
Object Type
UCell Group
Issue 01 (2016-09-15)
710
PRS
Performance Report Reference
Subreport Information
Subrepo
rt Name
Comparisi
on Report
Between
Threesector
And
MultiSector On
Cell
Counter
VS.Periodic.MrRpt.RSCP.0
VS.Periodic.MrRpt.RSCP.1
VS.Periodic.MrRpt.RSCP.2
VS.Periodic.MrRpt.RSCP.3
VS.Periodic.MrRpt.RSCP.4
VS.Periodic.MrRpt.RSCP.5
Issue 01 (2016-09-15)
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
711
PRS
Performance Report Reference
Subrepo
rt Name
Counter
VS.Periodic.MrRpt.RSCP.6
VS.Periodic.MrRpt.RSCP.7
VS.Periodic.MrRpt.RSCP.8
VS.Periodic.MrRpt.RSCP.9
VS.Periodic.MrRpt.EcNo.0
VS.Periodic.MrRpt.EcNo.1
VS.Periodic.MrRpt.EcNo.2
Issue 01 (2016-09-15)
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
712
PRS
Performance Report Reference
Subrepo
rt Name
Counter
VS.Periodic.MrRpt.EcNo.3
VS.Periodic.MrRpt.EcNo.4
VS.Periodic.MrRpt.EcNo.5
VS.Periodic.MrRpt.EcNo.6
VS.Periodic.MrRpt.EcNo.7
VS.Periodic.MrRpt.EcNo.8
Issue 01 (2016-09-15)
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
713
PRS
Performance Report Reference
Subrepo
rt Name
Counter
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
No
ne
Soft
Hando
ver
Measu
rement
per cell
(([VS.SHO.AS.1RL]+
[VS.SHO.AS.2RL]+
[VS.SHO.AS.3RL]+
[VS.SHO.AS.4RL]+
[VS.SHO.AS.5RL]+
[VS.SHO.AS.6RL])/
([VS.SHO.AS.1RL]+
[VS.SHO.AS.2RL]/
{2}+[VS.SHO.AS.
3RL]/{3}+
[VS.SHO.AS.4RL]/
{4}+[VS.SHO.AS.
5RL]/{5}+
[VS.SHO.AS.6RL]/
{6}))-{1}
Soft
Hando
ver
Measu
rement
per cell
([SHO.SuccRLAddUE
Side]+
[SHO.SuccRLDelUESi
de])/
([SHO.AttRLAddUESi
de]+
[SHO.AttRLDelUESide
])*{100.00}
nu
mb
er
HSDP
A
Measu
rement
per cell
HSDP
A
Measu
rement
per cell
TX
and
RX
Power
Measu
rement
<per
Cell>
VS.SHO.Factor.RL.Cell
VS.SHO.Success.Cell.Rate
VS.HSDPA.UE.Mean.Cell
VS.HSDPA.MeanChThroughput.T
otalBytes
byt
e
dB
m
VS.MeanRTWP
Issue 01 (2016-09-15)
714
PRS
Performance Report Reference
Subrepo
rt Name
Counter
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
dB
m
TX
and
RX
Power
Measu
rement
<per
Cell>
nu
mb
er
HSUP
A
Measu
rement
per cell
byt
e
HSUP
A
Measu
rement
per cell
RRC
MR
Measu
rement
<per
Cell>
CS Radio Access
Success Rate = RRC
Connection
Establishment Success
Rate x CS RAB
Establishment Success
Rate x 100%
RRC
MR
Measu
rement
<per
Cell>
RRC
MR
Measu
rement
<per
Cell>
VS.MinRTWP
VS.HSUPA.UE.Mean.Cell
VS.HSUPA.MeanChThroughput.T
otalBytes
Issue 01 (2016-09-15)
715
PRS
Performance Report Reference
Subrepo
rt Name
Counter
Co
un
ter
Un
it
Functi
on
Subse
t
RRC
MR
Measu
rement
<per
Cell>
Soft
Hando
ver
Measu
rement
per cell
Formula
([SHO.SuccRLAddUE
Side]+
[SHO.SuccRLDelUESi
de])/
([SHO.AttRLAddUESi
de]+
[SHO.AttRLDelUESide
])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GU
Object Type
RNC NodeB
Issue 01 (2016-09-15)
716
PRS
Performance Report Reference
Subreport Information
Subrepo
rt Name
Comparisi
on Report
Between
Threesector
And
MultiSector On
NodeB
Counter
VS.Periodic.MrRpt.RSCP.0
VS.Periodic.MrRpt.RSCP.1
VS.Periodic.MrRpt.RSCP.2
VS.Periodic.MrRpt.RSCP.3
VS.Periodic.MrRpt.RSCP.4
VS.Periodic.MrRpt.RSCP.5
Issue 01 (2016-09-15)
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
717
PRS
Performance Report Reference
Subrepo
rt Name
Counter
VS.Periodic.MrRpt.RSCP.6
VS.Periodic.MrRpt.RSCP.7
VS.Periodic.MrRpt.RSCP.8
VS.Periodic.MrRpt.RSCP.9
VS.Periodic.MrRpt.EcNo.0
VS.Periodic.MrRpt.EcNo.1
VS.Periodic.MrRpt.EcNo.2
Issue 01 (2016-09-15)
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
718
PRS
Performance Report Reference
Subrepo
rt Name
Counter
VS.Periodic.MrRpt.EcNo.3
VS.Periodic.MrRpt.EcNo.4
VS.Periodic.MrRpt.EcNo.5
VS.Periodic.MrRpt.EcNo.6
VS.Periodic.MrRpt.EcNo.7
VS.Periodic.MrRpt.EcNo.8
Issue 01 (2016-09-15)
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
719
PRS
Performance Report Reference
Subrepo
rt Name
Counter
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
No
ne
Soft
Hando
ver
Measu
rement
per cell
(([VS.SHO.AS.1RL]+
[VS.SHO.AS.2RL]+
[VS.SHO.AS.3RL]+
[VS.SHO.AS.4RL]+
[VS.SHO.AS.5RL]+
[VS.SHO.AS.6RL])/
([VS.SHO.AS.1RL]+
[VS.SHO.AS.2RL]/
{2}+[VS.SHO.AS.
3RL]/{3}+
[VS.SHO.AS.4RL]/
{4}+[VS.SHO.AS.
5RL]/{5}+
[VS.SHO.AS.6RL]/
{6}))-{1}
Soft
Hando
ver
Measu
rement
per cell
([SHO.SuccRLAddUE
Side]+
[SHO.SuccRLDelUESi
de])/
([SHO.AttRLAddUESi
de]+
[SHO.AttRLDelUESide
])*{100.00}
nu
mb
er
HSDP
A
Measu
rement
per cell
HSDP
A
Measu
rement
per cell
TX
and
RX
Power
Measu
rement
<per
Cell>
VS.SHO.Factor.RL.Cell
VS.SHO.Success.Cell.Rate
VS.HSDPA.UE.Mean.Cell
VS.HSDPA.MeanChThroughput.T
otalBytes
byt
e
dB
m
VS.MeanRTWP
Issue 01 (2016-09-15)
720
PRS
Performance Report Reference
Subrepo
rt Name
Counter
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
dB
m
TX
and
RX
Power
Measu
rement
<per
Cell>
nu
mb
er
HSUP
A
Measu
rement
per cell
byt
e
HSUP
A
Measu
rement
per cell
RRC
MR
Measu
rement
<per
Cell>
CS Radio Access
Success Rate = RRC
Connection
Establishment Success
Rate x CS RAB
Establishment Success
Rate x 100%
RRC
MR
Measu
rement
<per
Cell>
RRC
MR
Measu
rement
<per
Cell>
VS.MinRTWP
VS.HSUPA.UE.Mean.Cell
VS.HSUPA.MeanChThroughput.T
otalBytes
Issue 01 (2016-09-15)
721
PRS
Performance Report Reference
Subrepo
rt Name
Counter
Co
un
ter
Un
it
Functi
on
Subse
t
RRC
MR
Measu
rement
<per
Cell>
Soft
Hando
ver
Measu
rement
per cell
Formula
([SHO.SuccRLAddUE
Side]+
[SHO.SuccRLDelUESi
de])/
([SHO.AttRLAddUESi
de]+
[SHO.AttRLDelUESide
])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GU
Object Type
UCell Group
Issue 01 (2016-09-15)
722
PRS
Performance Report Reference
Subreport Information
Subrepo
rt Name
Simple
Report Of
Threesector
And
MultiSector On
The Same
Time
Counter
VS.Periodic.MrRpt.RSCP.0
VS.Periodic.MrRpt.RSCP.1
VS.Periodic.MrRpt.RSCP.2
VS.Periodic.MrRpt.RSCP.3
VS.Periodic.MrRpt.RSCP.4
VS.Periodic.MrRpt.RSCP.5
Issue 01 (2016-09-15)
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
723
PRS
Performance Report Reference
Subrepo
rt Name
Counter
VS.Periodic.MrRpt.RSCP.6
VS.Periodic.MrRpt.RSCP.7
VS.Periodic.MrRpt.RSCP.8
VS.Periodic.MrRpt.RSCP.9
VS.Periodic.MrRpt.EcNo.0
VS.Periodic.MrRpt.EcNo.1
VS.Periodic.MrRpt.EcNo.2
Issue 01 (2016-09-15)
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
724
PRS
Performance Report Reference
Subrepo
rt Name
Counter
VS.Periodic.MrRpt.EcNo.3
VS.Periodic.MrRpt.EcNo.4
VS.Periodic.MrRpt.EcNo.5
VS.Periodic.MrRpt.EcNo.6
VS.Periodic.MrRpt.EcNo.7
VS.Periodic.MrRpt.EcNo.8
Issue 01 (2016-09-15)
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
No
ne
RRC
MR
Measu
rement
<per
Cell>
725
PRS
Performance Report Reference
Subrepo
rt Name
Counter
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
No
ne
Soft
Hando
ver
Measu
rement
per cell
(([VS.SHO.AS.1RL]+
[VS.SHO.AS.2RL]+
[VS.SHO.AS.3RL]+
[VS.SHO.AS.4RL]+
[VS.SHO.AS.5RL]+
[VS.SHO.AS.6RL])/
([VS.SHO.AS.1RL]+
[VS.SHO.AS.2RL]/
{2}+[VS.SHO.AS.
3RL]/{3}+
[VS.SHO.AS.4RL]/
{4}+[VS.SHO.AS.
5RL]/{5}+
[VS.SHO.AS.6RL]/
{6}))-{1}
Soft
Hando
ver
Measu
rement
per cell
([SHO.SuccRLAddUE
Side]+
[SHO.SuccRLDelUESi
de])/
([SHO.AttRLAddUESi
de]+
[SHO.AttRLDelUESide
])*{100.00}
nu
mb
er
HSDP
A
Measu
rement
per cell
HSDP
A
Measu
rement
per cell
TX
and
RX
Power
Measu
rement
<per
Cell>
VS.SHO.Factor.RL.Cell
VS.SHO.Success.Cell.Rate
VS.HSDPA.UE.Mean.Cell
VS.HSDPA.MeanChThroughput.T
otalBytes
byt
e
dB
m
VS.MeanRTWP
Issue 01 (2016-09-15)
726
PRS
Performance Report Reference
Subrepo
rt Name
Counter
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
dB
m
TX
and
RX
Power
Measu
rement
<per
Cell>
nu
mb
er
HSUP
A
Measu
rement
per cell
byt
e
HSUP
A
Measu
rement
per cell
RRC
MR
Measu
rement
<per
Cell>
CS Radio Access
Success Rate = RRC
Connection
Establishment Success
Rate x CS RAB
Establishment Success
Rate x 100%
RRC
MR
Measu
rement
<per
Cell>
RRC
MR
Measu
rement
<per
Cell>
VS.MinRTWP
VS.HSUPA.UE.Mean.Cell
VS.HSUPA.MeanChThroughput.T
otalBytes
Issue 01 (2016-09-15)
727
PRS
Performance Report Reference
Subrepo
rt Name
Counter
Co
un
ter
Un
it
Functi
on
Subse
t
RRC
MR
Measu
rement
<per
Cell>
Soft
Hando
ver
Measu
rement
per cell
Formula
([SHO.SuccRLAddUE
Side]+
[SHO.SuccRLDelUESi
de])/
([SHO.AttRLAddUESi
de]+
[SHO.AttRLDelUESide
])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
BSC6900GU
Object Type
UCell Group
Issue 01 (2016-09-15)
728
PRS
Performance Report Reference
Subreport Information
Subrepo
rt Name
Capacity
Performan
ce
Estimatio
n Report
Counter
VS.HSDPA.MeanChThroughput.T
otalBytes
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
HSDP
A
Measu
rement
per cell
dB
m
TX
and
RX
Power
Measu
rement
<per
Cell>
No
ne
TX
and
RX
Power
Measu
rement
<per
Cell>
No
ne
TX
and
RX
Power
Measu
rement
<per
Cell>
No
ne
TX
and
RX
Power
Measu
rement
<per
Cell>
byt
e
VS.TCP.0
VS.TCP.1
VS.TCP.2
VS.TCP.3
Issue 01 (2016-09-15)
729
PRS
Performance Report Reference
Subrepo
rt Name
Counter
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
No
ne
TX
and
RX
Power
Measu
rement
<per
Cell>
No
ne
TX
and
RX
Power
Measu
rement
<per
Cell>
No
ne
TX
and
RX
Power
Measu
rement
<per
Cell>
No
ne
TX
and
RX
Power
Measu
rement
<per
Cell>
No
ne
TX
and
RX
Power
Measu
rement
<per
Cell>
VS.TCP.4
VS.TCP.5
VS.TCP.6
VS.TCP.7
VS.TCP.8
Issue 01 (2016-09-15)
730
PRS
Performance Report Reference
Subrepo
rt Name
Counter
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
No
ne
TX
and
RX
Power
Measu
rement
<per
Cell>
No
ne
TX
and
RX
Power
Measu
rement
<per
Cell>
No
ne
TX
and
RX
Power
Measu
rement
<per
Cell>
No
ne
TX
and
RX
Power
Measu
rement
<per
Cell>
No
ne
TX
and
RX
Power
Measu
rement
<per
Cell>
VS.TCP.9
VS.TCP.10
VS.TCP.11
VS.TCP.12
VS.TCP.13
Issue 01 (2016-09-15)
731
PRS
Performance Report Reference
Subrepo
rt Name
Counter
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
No
ne
TX
and
RX
Power
Measu
rement
<per
Cell>
No
ne
TX
and
RX
Power
Measu
rement
<per
Cell>
No
ne
TX
and
RX
Power
Measu
rement
<per
Cell>
No
ne
TX
and
RX
Power
Measu
rement
<per
Cell>
No
ne
TX
and
RX
Power
Measu
rement
<per
Cell>
VS.TCP.14
VS.TCP.15
VS.TCP.16
VS.TCP.17
VS.TCP.18
Issue 01 (2016-09-15)
732
PRS
Performance Report Reference
Subrepo
rt Name
Counter
Co
un
ter
Un
it
Functi
on
Subse
t
Formula
No
ne
TX
and
RX
Power
Measu
rement
<per
Cell>
TX
and
RX
Power
Measu
rement
<per
Cell>
VS.TCP.19
DLLoad
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
733
PRS
Performance Report Reference
21
Issue 01 (2016-09-15)
734
PRS
Performance Report Reference
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
735
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RB.DLBkgPS.64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLBkgPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLBkgPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLBkgPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
736
PRS
Performance Report Reference
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
VS.RRC.SuccConn
Estab.Service.Cell.R
ate
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OgCo
nvCall]+
[RRC.SuccConnEstab.OrgStr
Call]+
[RRC.SuccConnEstab.OrgItrC
all]+
[RRC.SuccConnEstab.OrgBkg
Call]+
[RRC.SuccConnEstab.OrgSub
Call]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrC
all]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCa
ll]+
[RRC.SuccConnEstab.Unkow
n]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallRe
Est]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig])/
([RRC.AttConnEstab.OrgCon
vCall]+
[RRC.AttConnEstab.OrgStrCa
ll]+
[RRC.AttConnEstab.OrgInter
Call]+
[RRC.AttConnEstab.OrgBkgC
all]+
[RRC.AttConnEstab.OgSubC
all]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInter
Call]+
737
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100.00}
VS.RRC.SuccConn
Estab.Service.Cell
Issue 01 (2016-09-15)
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.OgCon
vCall]+
[RRC.SuccConnEstab.OrgStr
Call]+
[RRC.SuccConnEstab.OrgItrC
all]+
[RRC.SuccConnEstab.OrgBkg
Call]+
[RRC.SuccConnEstab.OrgSub
Call]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrC
all]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCa
ll]+
[RRC.SuccConnEstab.Unkow
n]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallRe
Est]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig]
738
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.AttConnEs
tab.Service.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.OrgConv
Call]+
[RRC.AttConnEstab.OrgStrCa
ll]+
[RRC.AttConnEstab.OrgInter
Call]+
[RRC.AttConnEstab.OrgBkgC
all]+
[RRC.AttConnEstab.OgSubC
all]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInter
Call]+
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig]
VS.RRC.SuccConn
Estab.Other.Cell.Rat
e
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.IRAT
CelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
)/
([RRC.AttConnEstab.IRATCe
lRes]+
[RRC.AttConnEstab.IRATCC
O]+[RRC.AttConnEstab.Reg]
+
[RRC.AttConnEstab.Detach]
)*{100.00}
739
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Other.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.IRATC
elRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
VS.RRC.AttConnEs
tab.Other.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.IRATCel
Res]+
[RRC.AttConnEstab.IRATCC
O]+[RRC.AttConnEstab.Reg]
+[RRC.AttConnEstab.Detach]
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*{1
00.00}
VS.RAB.SuccEstab.
AMR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstab.A
MR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstCS
.Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstCS.
Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
740
PRS
Performance Report Reference
Subrep
ort
Name
HO
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*{
100.00}
VS.RAB.SuccEstPS.
Cell
none
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.SuccEstabPS.Conv]
+[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+[VS.RAB.SuccEstabPS.Bkg]
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
VS.SHO.Factor.RL.
Cell
none
Soft
Handover
Measuremen
t per cell
(([VS.SHO.AS.1RL]+
[VS.SHO.AS.2RL]+
[VS.SHO.AS.3RL]+
[VS.SHO.AS.4RL]+
[VS.SHO.AS.5RL]+
[VS.SHO.AS.6RL])/
([VS.SHO.AS.1RL]+
[VS.SHO.AS.2RL]/{2}+
[VS.SHO.AS.3RL]/{3}+
[VS.SHO.AS.4RL]/{4}+
[VS.SHO.AS.5RL]/{5}+
[VS.SHO.AS.6RL]/{6}))-{1}
VS.SHO.Success.Ce
ll.Rate
Soft
Handover
Measuremen
t per cell
([SHO.SuccRLAddUESide]+
[SHO.SuccRLDelUESide])/
([SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide])*{10
0.00}
VS.SHO.SuccUESid
e.Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.SuccRLAddUESide]+
[SHO.SuccRLDelUESide]
VS.SHO.AttUESide.
Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide]
741
PRS
Performance Report Reference
Subrep
ort
Name
CDR
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HHO.InterFreq.
Out.Cell.Rate
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.SuccOut]/
[VS.HHO.InterFreq.AttOut]*{
100.00}
VS.HHO.InterFreq.S
uccOut
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreq.
AttOut
times
Hard
Handover
Measuremen
t per cell
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*{100.00
}
IRATHO.SuccOutC
S
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.AttOutCS
times
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.SuccO
utPSUNTRAN.Cell.
Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutPSUTRAN
]/
[IRATHO.AttOutPSUTRAN
]*{100.00}
IRATHO.SuccOutPS
UTRAN
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.AttOutPS
UTRAN
times
InterRAT
Handover
Measuremen
t per cell
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
742
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.CS.AMR.Call.D
rop.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]
VS.CS.AMR.Releas
e
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R]
VS.CS.VP.Call.Drop
.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
VS.CS.VP.Call.Drop
.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]
VS.CS.VP.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64]
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*{1
00.00}
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
743
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Release.PS
.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS Call
Drop
Cells
VS.CS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm]
744
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.CS.RAB.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm]+
[VS.RAB.Loss.CS.Norm]
VS.RAB.RelReqCS.
OM
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqCS.
RABPreempt
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqCS.
UTRANgen
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.RLCRst
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.ULSync
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.UuNoReply
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
745
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.CS.R
F.Oth
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.A
al2Loss
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.Call.Drop.CS.Ot
her
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Abnorm][VS.RAB.RelReqCS.OM][VS.RAB.RelReqCS.UTRAN
gen][VS.RAB.RelReqCS.RABPre
empt][VS.RAB.Loss.CS.Aal2Loss]
VP Call
Drops
VS.CS.VP.Call.Drop
.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]
AMR
Call
Drops
VS.CS.AMR.Call.D
rop.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]
PS Drop
Cells
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
VS.PS.RAB.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm]
746
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.RelReqPS.
OM
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqPS.
RABPreempt
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.RLCRst
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.ULSync
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.UuNoReply
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.Oth
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.G
TPULoss
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
747
PRS
Performance Report Reference
Subrep
ort
Name
RRC Fail
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.Call.Drop.PS.Ot
her
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.Abnorm][VS.RAB.RelReqPS.OM][VS.RAB.RelReqPS.RABPree
mpt][VS.RAB.Loss.PS.GTPULoss
]
VS.RRC.FailConnE
stab.Cell
times
RRC
connection
setup
measurement
per cell
[VS.RRC.AttConnEstab.Cell][RRC.SuccConnEstab.sum]
VS.RRC.AttConEst.
Cell
none
RRC
connection
setup
measurement
per cell
[VS.RRC.AttConEst.DCH]+
[VS.RRC.AttConEst.CCH]
VS.RRC.Rej.RL.Fai
l
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.TNL.F
ail
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Power.
Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.UL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.DL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
748
PRS
Performance Report Reference
Subrep
ort
Name
CS RAB
FAIL
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.Rej.Code.C
ong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Other.
Cong
times
RRC
connection
reject
measurement
per cell
[RRC.FailConnEstab.Cong][VS.RRC.Rej.Power.Cong][VS.RRC.Rej.Code.Cong][VS.RRC.Rej.UL.CE.Cong][VS.RRC.Rej.DL.CE.Cong]
RRC.FailConnEstab.
NoReply
times
RRC
connection
reject
measurement
per cell
VS.RAB.FailEstabC
S.Cell
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.AttEstabCS.Conv]+
[VS.RAB.AttEstabCS.Str][VS.RAB.SuccEstabCS.Conv]
-[VS.RAB.SuccEstabCS.Str]
VS.RAB.AttEstabC
S.Cell
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.AttEstabCS.Conv]+
[VS.RAB.AttEstabCS.Str]
VS.RAB.FailEstabC
S.TNL
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCS.
Relo
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCS.
RIPFail
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
Power.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
749
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstCs.
ULCE.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
DLCE.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
Code.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstab.
CS.DLIUBBand.Co
ng
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstab.
CS.ULIUBBand.Co
ng
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstabC
S.Unsp.Other
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
[VS.RAB.FailEstCS.Unsp][VS.RAB.FailEstabCS.Cong]
VS.RAB.FailEstabC
S.RNL.Other
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
[VS.RAB.FailEstabCS.RNL][VS.RAB.FailEstCS.Relo][VS.RAB.FailEstCS.RIPFail][VS.RAB.FailEstabCS.Cong]
VS.RAB.FailEstabC
S.other.CELL
none
Measuremen
t of CS RAB
assignment
setup per cell
([VS.RAB.AttEstabCS.Conv]
+[VS.RAB.AttEstabCS.Str][VS.RAB.SuccEstabCS.Conv]
-[VS.RAB.SuccEstabCS.Str])[VS.RAB.FailEstabCS.RNL][VS.RAB.FailEstabCS.TNL]
750
PRS
Performance Report Reference
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS RAB
FAIL
VS.RAB.FailEstabP
S.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
VS.RAB.FailEstPS.
TNL
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
RIPFail
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
Par
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
Relo
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.P
ower.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
Code.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
751
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstPs.
ULCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
DLCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstab.P
S.DLIUBBand.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstab.P
S.ULIUBBand.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstabP
S.Unsp.Other
none
Measuremen
t of PS RAB
assignment
failure per
cell
[VS.RAB.FailEstPS.Unsp][VS.RAB.FailEstPs.Power.Co
ng][VS.RAB.FailEstPs.Code.Con
g][VS.RAB.FailEstPs.ULCE.Co
ng][VS.RAB.FailEstPs.DLCE.Co
ng][VS.RAB.FailEstab.PS.DLIU
BBand.Cong][VS.RAB.FailEstab.PS.ULIU
BBand.Cong]
VS.RAB.FlEstPS.R
NL.Other
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
[VS.RAB.FailEstPS.RNL][VS.RAB.FailEstPS.RIPFail][VS.RAB.FailEstPS.Par][VS.RAB.FailEstPS.Relo][VS.RAB.FailEstPS.Unsp]
752
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstabP
S.Other.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
(([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg]))
-[VS.RAB.FailEstPS.TNL][VS.RAB.FailEstPS.RNL]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Issue 01 (2016-09-15)
753
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SHO
FAIL
VS.SHO.Fail.Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide][SHO.SuccRLAddUESide][SHO.SuccRLDelUESide]
VS.SHO.AttUESide.
Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide]
SHO.FailRLAddUE
Side.CfgUnsup
times
Soft
Handover
Measuremen
t per cell
SHO.FailRLAddUE
Side.Isr
times
Soft
Handover
Measuremen
t per cell
SHO.FailRLAddUE
Side.InvCfg
times
Soft
Handover
Measuremen
t per cell
SHO.FailRLAddUE
Side.NoReply
times
Soft
Handover
Measuremen
t per cell
VS.SHO.Fail.Other.
Cell
none
Soft
Handover
Measuremen
t per cell
([SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide][SHO.SuccRLAddUESide][SHO.SuccRLDelUESide])[SHO.FailRLAddUESide.Cfg
Unsup][SHO.FailRLAddUESide.Isr][SHO.FailRLAddUESide.Inv
Cfg][SHO.FailRLAddUESide.No
Reply]
VS.HHO.InterFreq.F
ailOut
none
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.AttOut][VS.HHO.InterFreq.SuccOut]
InterFRe
quest
HHO
Fail
Issue 01 (2016-09-15)
754
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HHO.InterFreq.
AttOut
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CfgUnsupp
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.PyhChFail
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.FailUSR
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CellUpdt
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CfgInvalid
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.NoReply
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreq.F
ailOther
none
Hard
Handover
Measuremen
t per cell
([VS.HHO.InterFreq.AttOut][VS.HHO.InterFreq.SuccOut])
[VS.HHO.InterFreqOut.CfgU
nsupp][VS.HHO.InterFreqOut.PyhC
hFail][VS.HHO.InterFreqOut.FailU
SR][VS.HHO.InterFreqOut.CellU
pdt][VS.HHO.InterFreqOut.CfgIn
valid][VS.HHO.InterFreqOut.NoRe
ply]
755
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS
InterRAT
HHO
FAIL
VS.IRATHO.FailOu
tCS
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutCS][IRATHO.SuccOutCS]
IRATHO.AttOutCS
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutCS.
CfgUnsupp
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutCS.
PhyChFail
times
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.FailOu
tCS.Other
none
InterRAT
Handover
Measuremen
t per cell
([IRATHO.AttOutCS][IRATHO.SuccOutCS])[IRATHO.FailOutCS.CfgUns
upp][IRATHO.FailOutCS.PhyChF
ail]
VS.IRATHO.FailOu
tPSUTRAN.Cell
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutPSUTRAN][IRATHO.SuccOutPSUTRAN
]
IRATHO.AttOutPS
UTRAN
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutPS
UTRAN.CfgUnsupp
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutPS
UTRAN.PhyChFail
times
InterRAT
Handover
Measuremen
t per cell
PS
InterRAT
HHO
FAIL
Issue 01 (2016-09-15)
756
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.IRATHO.FailOu
tPSUTRAN.Other
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutPSUTRAN][IRATHO.SuccOutPSUTRAN
][IRATHO.FailOutPSUTRAN.
CfgUnsupp][IRATHO.FailOutPSUTRAN.
PhyChFail]
HSDPA
HHO
IntraFRe
quest
Fail
VS.HSDPA.ServCell
Chg.HHO.IntraFreq.
NoChR.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.AttOutIntr
aFreq][VS.HSDPA.HHO.SuccOutInt
raFreq]
VS.HSDPA.HHO.At
tOutIntraFreq
times
HSDPA
Measuremen
t per cell
HSDPA
HHO
InterFRe
quest
Fail
VS.HSDPA.ServCell
Chg.HHO.InterFreq.
NoChR.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.AttOutInte
rFreq][VS.HSDPA.HHO.SuccOutInt
erFreq]
VS.HSDPA.HHO.At
tOutInterFreq
times
HSDPA
Measuremen
t per cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Issue 01 (2016-09-15)
757
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
Traffic
VS.HSDPA.MeanCh
Throughput.TotalM
Bytes
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]/
({1024}*{1024})
VS.HSDPA.UE.Mea
n.Cell
numb
er
HSDPA
Measuremen
t per cell
VS.HSDPA.MeanCh
Throughput.TotalM
Bps
none
HSDPA
Measuremen
t per cell
([VS.HSDPA.MeanChThroug
hput.TotalBytes]*{8.0}/
({1024.0}*{1024.0}))/
({GP}*{60})
VS.HSDPA.RAB.Su
ccEstab.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]
/
[VS.HSDPA.RAB.AttEstab
]*{100.00}
VS.HSDPA.RAB.Su
ccEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.At
tEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ServCell
Chg.Succ.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.Su
ccOut]/
[VS.HSDPA.SHO.CellChg.At
tOut]*{100.00}
VS.HSDPA.SHO.Ce
llChg.SuccOut
times
HSDPA
Measuremen
t per cell
VS.HSDPA.SHO.Ce
llChg.AttOut
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.In
traFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInt
raFreq]/
[VS.HSDPA.HHO.AttOutIntr
aFreq]*{100.00}
VS.HSDPA.HHO.Su
ccOutIntraFreq
times
HSDPA
Measuremen
t per cell
HSDPA
Access
HSDPA
HO
Issue 01 (2016-09-15)
758
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.HHO.At
tOutIntraFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.In
terFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInt
erFreq]/
[VS.HSDPA.HHO.AttOutInte
rFreq]*{100.00}
VS.HSDPA.HHO.Su
ccOutInterFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.At
tOutInterFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.HS
DSCHtoDCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH]/
[VS.HSDPA.ChR.HSDSCHto
DCH.Att]*{100.00}
VS.HSDPA.ChR.HS
DSCHtoDCH
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.HS
DSCHtoDCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.DC
HtoHSDSCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH]/
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att]*{100.00}
VS.HSDPA.ChR.DC
HtoHSDSCH
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.DC
HtoHSDSCH.Att
times
HSDPA
Measuremen
t per cell
759
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
CDR
VS.HSDPA.RAB.A
bnormRel.Rate
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.InAct
ivity]+
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.Succ
OutIntraFreq]+
[VS.HSDPA.HHO.H2D.Succ
OutInterFreq])*{100.00}
VS.HSDPA.RAB.A
bnormRel
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]
VS.HSDPA.RAB.Re
l
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.InActi
vity]+
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.Succ
OutIntraFreq]+
[VS.HSDPA.HHO.H2D.Succ
OutInterFreq]
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
760
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
RAB
Fail
VS.HSDPA.RAB.Fa
ilEstab
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.AttEstab][VS.HSDPA.RAB.SuccEstab]
VS.HSDPA.RAB.At
tEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.MACD
FailStpPerCell
times
HSDPA
Measuremen
t per cell
VS.HSDPA.MACD
AttStpPerCell
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MACDSuccStpP
erCell]+
[VS.HSDPA.MACDFailStpPe
rCell]
VS.HSDPA.RAB.A
bnormRel
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]
HSDPA
RAB
Abnorm
Rel
Issue 01 (2016-09-15)
761
PRS
Performance Report Reference
Subrep
ort
Name
HSDPA
FACHto
HSDSC
H Fail
HSDPA
HSDSC
HtoFAC
H Fail
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.RAB.Re
l
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.InActi
vity]+
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.Succ
OutIntraFreq]+
[VS.HSDPA.HHO.H2D.Succ
OutInterFreq]
VS.HSDPA.MeanCh
Throughput.NEW
none
HSDPA
Measuremen
t per cell
({8}*[VS.HSDPA.MeanChTh
roughput.TotalBytes]/
([VS.HSDPA.MeanChThroug
hput.Times]))
VS.HSDPA.MeanCh
Throughput.TotalByt
es
byte
HSDPA
Measuremen
t per cell
VS.HSDPA.UE.Mea
n.Cell
numb
er
HSDPA
Measuremen
t per cell
VS.HSDPA.MACD.
Mean.Cell
numb
er
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.FA
CHtoHSDSCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.FACHtoHS
DSCH.Att][VS.HSDPA.ChR.FACHtoHS
DSCH]
VS.HSDPA.ChR.FA
CHtoHSDSCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.HS
DSCHtoFACH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
FACH.Att][VS.HSDPA.ChR.HSDSCHto
FACH]
VS.HSDPA.ChR.HS
DSCHtoFACH.Att
times
HSDPA
Measuremen
t per cell
762
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
HSDSC
HtoDCH
Fail
VS.HSDPA.ChR.HS
DSCHtoDCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH.Att][VS.HSDPA.ChR.HSDSCHto
DCH]
VS.HSDPA.ChR.HS
DSCHtoDCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.DC
HtoHSDSCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att][VS.HSDPA.ChR.DCHtoHSD
SCH]
VS.HSDPA.ChR.DC
HtoHSDSCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ServCell
Chg.SHO.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.At
tOut][VS.HSDPA.SHO.CellChg.Su
ccOut]
VS.HSDPA.SHO.Ce
llChg.AttOut
times
HSDPA
Measuremen
t per cell
HSDPA
DCHtoH
SDSCH
Fail
HSDPA
ServCell
Chg Fail
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Issue 01 (2016-09-15)
763
PRS
Performance Report Reference
Object Type
RNC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA
Access
VS.HSUPA.RAB.Su
ccEstab.Rate
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.SuccEstab]
/
[VS.HSUPA.RAB.AttEstab
]*{100.00}
VS.HSUPA.RAB.Su
ccEstab
numb
er
HSUPA
Measuremen
t per cell
VS.HSUPA.RAB.At
tEstab
numb
er
HSUPA
Measuremen
t per cell
VS.HSUPA.EDCH.
SHO.Succ.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.EDCH.SHO.Suc
c]/
[VS.HSUPA.EDCH.SHO.Att
]*{100.00}
VS.HSUPA.EDCH.
SHO.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.EDCH.
SHO.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.SHO.Se
rvCellChg.Succ.Rati
o
HSUPA
Measuremen
t per cell
[VS.HSUPA.SHO.ServCellCh
g.Succ]/
[VS.HSUPA.SHO.ServCellCh
g.Att]*{100.00}
VS.HSUPA.SHO.Se
rvCellChg.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.SHO.Se
rvCellChg.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.HHO.InterFreq.
NoChR.Succ]/
[VS.HSUPA.HHO.InterFreq.
NoChR.Att]*{100.00}
HSUPA
HO
Issue 01 (2016-09-15)
764
PRS
Performance Report Reference
Subrep
ort
Name
HSUPA
CDR
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.HHO.In
terFreq.NoChR.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.RAB.A
bnormRel.Rate
HSUPA
Measuremen
t per cell
([VS.HSUPA.RAB.Loss.Abno
rm])/
([VS.HSUPA.RAB.Loss.Abno
rm]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ])*{100.00}
VS.HSUPA.RAB.A
bnormRel
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnor
m]
VS.HSUPA.RAB.Re
lease
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnor
m]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ]
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
765
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLBkgPS.64
numb
er
Measuremen
t of RB
Procedure
per cell
766
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RB.DLBkgPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLBkgPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLBkgPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Issue 01 (2016-09-15)
767
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLBkgPS.64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLBkgPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLBkgPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLBkgPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
768
PRS
Performance Report Reference
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
VS.RRC.SuccConn
Estab.Service.Cell.R
ate
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OgCo
nvCall]+
[RRC.SuccConnEstab.OrgStr
Call]+
[RRC.SuccConnEstab.OrgItrC
all]+
[RRC.SuccConnEstab.OrgBkg
Call]+
[RRC.SuccConnEstab.OrgSub
Call]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrC
all]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCa
ll]+
[RRC.SuccConnEstab.Unkow
n]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallRe
Est]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig])/
([RRC.AttConnEstab.OrgCon
vCall]+
[RRC.AttConnEstab.OrgStrCa
ll]+
[RRC.AttConnEstab.OrgInter
Call]+
[RRC.AttConnEstab.OrgBkgC
all]+
[RRC.AttConnEstab.OgSubC
all]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInter
Call]+
769
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100.00}
VS.RRC.SuccConn
Estab.Service.Cell
Issue 01 (2016-09-15)
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.OgCon
vCall]+
[RRC.SuccConnEstab.OrgStr
Call]+
[RRC.SuccConnEstab.OrgItrC
all]+
[RRC.SuccConnEstab.OrgBkg
Call]+
[RRC.SuccConnEstab.OrgSub
Call]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrC
all]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCa
ll]+
[RRC.SuccConnEstab.Unkow
n]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallRe
Est]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig]
770
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.AttConnEs
tab.Service.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.OrgConv
Call]+
[RRC.AttConnEstab.OrgStrCa
ll]+
[RRC.AttConnEstab.OrgInter
Call]+
[RRC.AttConnEstab.OrgBkgC
all]+
[RRC.AttConnEstab.OgSubC
all]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInter
Call]+
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig]
VS.RRC.SuccConn
Estab.Other.Cell.Rat
e
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.IRAT
CelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
)/
([RRC.AttConnEstab.IRATCe
lRes]+
[RRC.AttConnEstab.IRATCC
O]+[RRC.AttConnEstab.Reg]
+
[RRC.AttConnEstab.Detach]
)*{100.00}
771
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Other.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.IRATC
elRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
VS.RRC.AttConnEs
tab.Other.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.IRATCel
Res]+
[RRC.AttConnEstab.IRATCC
O]+[RRC.AttConnEstab.Reg]
+[RRC.AttConnEstab.Detach]
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*{1
00.00}
VS.RAB.SuccEstab.
AMR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstab.A
MR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstCS
.Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstCS.
Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
772
PRS
Performance Report Reference
Subrep
ort
Name
HO
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*{
100.00}
VS.RAB.SuccEstPS.
Cell
none
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.SuccEstabPS.Conv]
+[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+[VS.RAB.SuccEstabPS.Bkg]
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
VS.SHO.Factor.RL.
Cell
none
Soft
Handover
Measuremen
t per cell
(([VS.SHO.AS.1RL]+
[VS.SHO.AS.2RL]+
[VS.SHO.AS.3RL]+
[VS.SHO.AS.4RL]+
[VS.SHO.AS.5RL]+
[VS.SHO.AS.6RL])/
([VS.SHO.AS.1RL]+
[VS.SHO.AS.2RL]/{2}+
[VS.SHO.AS.3RL]/{3}+
[VS.SHO.AS.4RL]/{4}+
[VS.SHO.AS.5RL]/{5}+
[VS.SHO.AS.6RL]/{6}))-{1}
VS.SHO.Success.Ce
ll.Rate
Soft
Handover
Measuremen
t per cell
([SHO.SuccRLAddUESide]+
[SHO.SuccRLDelUESide])/
([SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide])*{10
0.00}
VS.SHO.SuccUESid
e.Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.SuccRLAddUESide]+
[SHO.SuccRLDelUESide]
VS.SHO.AttUESide.
Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide]
773
PRS
Performance Report Reference
Subrep
ort
Name
CDR
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HHO.InterFreq.
Out.Cell.Rate
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.SuccOut]/
[VS.HHO.InterFreq.AttOut]*{
100.00}
VS.HHO.InterFreq.S
uccOut
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreq.
AttOut
times
Hard
Handover
Measuremen
t per cell
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*{100.00
}
IRATHO.SuccOutC
S
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.AttOutCS
times
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.SuccO
utPSUNTRAN.Cell.
Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutPSUTRAN
]/
[IRATHO.AttOutPSUTRAN
]*{100.00}
IRATHO.SuccOutPS
UTRAN
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.AttOutPS
UTRAN
times
InterRAT
Handover
Measuremen
t per cell
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
774
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.CS.AMR.Call.D
rop.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]
VS.CS.AMR.Releas
e
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R]
VS.CS.VP.Call.Drop
.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
VS.CS.VP.Call.Drop
.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]
VS.CS.VP.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64]
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*{1
00.00}
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
775
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Release.PS
.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
Traffic
VS.HSDPA.MeanCh
Throughput.TotalM
Bytes
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]/
({1024}*{1024})
VS.HSDPA.UE.Mea
n.Cell
numb
er
HSDPA
Measuremen
t per cell
776
PRS
Performance Report Reference
Subrep
ort
Name
HSDPA
Access
HSDPA
HO
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.MeanCh
Throughput.TotalM
Bps
none
HSDPA
Measuremen
t per cell
([VS.HSDPA.MeanChThroug
hput.TotalBytes]*{8.0}/
({1024.0}*{1024.0}))/
({GP}*{60})
VS.HSDPA.RAB.Su
ccEstab.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]
/
[VS.HSDPA.RAB.AttEstab
]*{100.00}
VS.HSDPA.RAB.Su
ccEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.At
tEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ServCell
Chg.Succ.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.Su
ccOut]/
[VS.HSDPA.SHO.CellChg.At
tOut]*{100.00}
VS.HSDPA.SHO.Ce
llChg.SuccOut
times
HSDPA
Measuremen
t per cell
VS.HSDPA.SHO.Ce
llChg.AttOut
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.In
traFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInt
raFreq]/
[VS.HSDPA.HHO.AttOutIntr
aFreq]*{100.00}
VS.HSDPA.HHO.Su
ccOutIntraFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.At
tOutIntraFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.In
terFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInt
erFreq]/
[VS.HSDPA.HHO.AttOutInte
rFreq]*{100.00}
VS.HSDPA.HHO.Su
ccOutInterFreq
times
HSDPA
Measuremen
t per cell
777
PRS
Performance Report Reference
Subrep
ort
Name
HSDPA
CDR
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.HHO.At
tOutInterFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.HS
DSCHtoDCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH]/
[VS.HSDPA.ChR.HSDSCHto
DCH.Att]*{100.00}
VS.HSDPA.ChR.HS
DSCHtoDCH
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.HS
DSCHtoDCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.DC
HtoHSDSCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH]/
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att]*{100.00}
VS.HSDPA.ChR.DC
HtoHSDSCH
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.DC
HtoHSDSCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.A
bnormRel.Rate
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.InAct
ivity]+
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.Succ
OutIntraFreq]+
[VS.HSDPA.HHO.H2D.Succ
OutInterFreq])*{100.00}
778
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.RAB.A
bnormRel
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]
VS.HSDPA.RAB.Re
l
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.InActi
vity]+
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.Succ
OutIntraFreq]+
[VS.HSDPA.HHO.H2D.Succ
OutInterFreq]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Issue 01 (2016-09-15)
779
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA
Access
VS.HSUPA.RAB.Su
ccEstab.Rate
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.SuccEstab]
/
[VS.HSUPA.RAB.AttEstab
]*{100.00}
VS.HSUPA.RAB.Su
ccEstab
numb
er
HSUPA
Measuremen
t per cell
VS.HSUPA.RAB.At
tEstab
numb
er
HSUPA
Measuremen
t per cell
VS.HSUPA.EDCH.
SHO.Succ.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.EDCH.SHO.Suc
c]/
[VS.HSUPA.EDCH.SHO.Att
]*{100.00}
VS.HSUPA.EDCH.
SHO.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.EDCH.
SHO.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.SHO.Se
rvCellChg.Succ.Rati
o
HSUPA
Measuremen
t per cell
[VS.HSUPA.SHO.ServCellCh
g.Succ]/
[VS.HSUPA.SHO.ServCellCh
g.Att]*{100.00}
VS.HSUPA.SHO.Se
rvCellChg.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.SHO.Se
rvCellChg.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.HHO.InterFreq.
NoChR.Succ]/
[VS.HSUPA.HHO.InterFreq.
NoChR.Att]*{100.00}
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
times
HSUPA
Measuremen
t per cell
HSUPA
HO
Issue 01 (2016-09-15)
780
PRS
Performance Report Reference
Subrep
ort
Name
HSUPA
CDR
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSUPA.HHO.In
terFreq.NoChR.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.RAB.A
bnormRel.Rate
HSUPA
Measuremen
t per cell
([VS.HSUPA.RAB.Loss.Abno
rm])/
([VS.HSUPA.RAB.Loss.Abno
rm]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ])*{100.00}
VS.HSUPA.RAB.A
bnormRel
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnor
m]
VS.HSUPA.RAB.Re
lease
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnor
m]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
781
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC
Failed
VS.RRC.FailConnE
stab.Cell
times
RRC
connection
setup
measurement
per cell
[VS.RRC.AttConnEstab.Cell][RRC.SuccConnEstab.sum]
VS.RRC.AttConnEs
tab.Cell
times
RRC
connection
setup
measurement
per cell
VS.RRC.Rej.RL.Fai
l
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.TNL.F
ail
times
RRC
connection
reject
measurement
per cell
RRC.FailConnEstab.
Cong
times
RRC
connection
reject
measurement
per cell
782
PRS
Performance Report Reference
Subrep
ort
Name
CS RAB
Failed
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.Rej.Power.
Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.UL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.DL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Code.C
ong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Other.
Cong
times
RRC
connection
reject
measurement
per cell
[RRC.FailConnEstab.Cong][VS.RRC.Rej.Power.Cong][VS.RRC.Rej.Code.Cong][VS.RRC.Rej.UL.CE.Cong][VS.RRC.Rej.DL.CE.Cong]
RRC.FailConnEstab.
NoReply
times
RRC
connection
reject
measurement
per cell
VS.RAB.FailEstabC
S.Cell
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.AttEstabCS.Conv]+
[VS.RAB.AttEstabCS.Str][VS.RAB.SuccEstabCS.Conv]
-[VS.RAB.SuccEstabCS.Str]
VS.RAB.AttEstabC
S.Cell
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.AttEstabCS.Conv]+
[VS.RAB.AttEstabCS.Str]
VS.RAB.FailEstabC
S.TNL
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
783
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstabC
S.RNL
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCS.
Unsp
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCS.
Relo
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCS.
RIPFail
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
Power.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
ULCE.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
DLCE.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
Code.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
784
PRS
Performance Report Reference
Subrep
ort
Name
PS RAB
Failed
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstabC
S.RNL.Other
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
[VS.RAB.FailEstabCS.RNL][VS.RAB.FailEstCS.Relo][VS.RAB.FailEstCS.RIPFail][VS.RAB.FailEstabCS.Cong]
VS.RAB.FailEstabC
S.other.CELL
none
Measuremen
t of CS RAB
assignment
setup per cell
([VS.RAB.AttEstabCS.Conv]
+[VS.RAB.AttEstabCS.Str][VS.RAB.SuccEstabCS.Conv]
-[VS.RAB.SuccEstabCS.Str])[VS.RAB.FailEstabCS.RNL][VS.RAB.FailEstabCS.TNL]
VS.RAB.FailEstabP
S.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
VS.RAB.AttEstabPS
.Conv
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
VS.RAB.FailEstPS.
RNL
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
Unsp
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
RIPFail
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
785
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstPS.
Par
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
Relo
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.P
ower.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
Code.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
ULCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
DLCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstab.P
S.ULIUBBand.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstab.P
S.DLIUBBand.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
786
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FlEstPS.R
NL.Other
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
[VS.RAB.FailEstPS.RNL][VS.RAB.FailEstPS.RIPFail][VS.RAB.FailEstPS.Par][VS.RAB.FailEstPS.Relo][VS.RAB.FailEstPS.Unsp]
VS.RAB.FailEstabP
S.Other.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
(([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg]))
-[VS.RAB.FailEstPS.TNL][VS.RAB.FailEstPS.RNL]
HSDPA
RAB
Failed
VS.HSDPA.RAB.Fa
ilEstab
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.AttEstab][VS.HSDPA.RAB.SuccEstab]
HSUPA
RAB
Failed
VS.HSUPA.RAB.Fa
ilEstab
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.AttEstab][VS.HSUPA.RAB.SuccEstab]
HSDPA
ChR
HSDSC
HtoDCH
Fail
VS.HSDPA.ChR.HS
DSCHtoDCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH.Att][VS.HSDPA.ChR.HSDSCHto
DCH]
VS.HSDPA.ChR.HS
DSCHtoDCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.DC
HtoHSDSCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att][VS.HSDPA.ChR.DCHtoHSD
SCH]
VS.HSDPA.ChR.DC
HtoHSDSCH.Att
times
HSDPA
Measuremen
t per cell
HSDPA
ChR
DCHtoH
SDSCH
Fail
Issue 01 (2016-09-15)
787
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS Call
Drop
VS.CS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm]
VS.RAB.SuccEstab
CS.Cell
none
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstabCS.Conv]
+[VS.RAB.SuccEstabCS.Str]
VS.RAB.RelReqCS.
OM
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
788
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.RelReqCS.
RABPreempt
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqCS.
UTRANgen
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.RLCRst
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.ULSync
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.UuNoReply
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.Oth
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
789
PRS
Performance Report Reference
Subrep
ort
Name
PS Call
Drop
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.CS.A
al2Loss
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.Call.Drop.CS.Ot
her
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Abnorm][VS.RAB.RelReqCS.OM][VS.RAB.RelReqCS.UTRAN
gen][VS.RAB.RelReqCS.RABPre
empt][VS.RAB.Loss.CS.Aal2Loss]
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
VS.RAB.SuccEstPS.
Cell
none
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.SuccEstabPS.Conv]
+[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+[VS.RAB.SuccEstabPS.Bkg]
VS.RAB.RelReqPS.
OM
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqPS.
RABPreempt
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
790
PRS
Performance Report Reference
Subrep
ort
Name
HSDPA
Call
Drop
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.PS.R
F.RLCRst
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.ULSync
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.UuNoReply
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.Oth
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.G
TPULoss
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.Call.Drop.PS.Ot
her
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.Abnorm][VS.RAB.RelReqPS.OM][VS.RAB.RelReqPS.RABPree
mpt][VS.RAB.Loss.PS.GTPULoss
]
VS.HSDPA.RAB.A
bnormRel
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]
791
PRS
Performance Report Reference
Subrep
ort
Name
HSUPA
Call
Drop
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.RAB.Re
lease
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.InActi
vity]+
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.Succ
OutIntraFreq]+
[VS.HSDPA.HHO.H2D.Succ
OutInterFreq]
VS.HSUPA.RAB.A
bnormRel
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnor
m]
VS.HSUPA.RAB.Re
lease
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnor
m]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
792
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SHO
Failed
VS.SHO.Fail.Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide][SHO.SuccRLAddUESide][SHO.SuccRLDelUESide]
VS.SHO.AttUESide.
Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide]
SHO.FailRLAddUE
Side.CfgUnsup
times
Soft
Handover
Measuremen
t per cell
SHO.FailRLAddUE
Side.Isr
times
Soft
Handover
Measuremen
t per cell
SHO.FailRLAddUE
Side.InvCfg
times
Soft
Handover
Measuremen
t per cell
SHO.FailRLAddUE
Side.NoReply
times
Soft
Handover
Measuremen
t per cell
VS.SHO.Fail.Other.
Cell
none
Soft
Handover
Measuremen
t per cell
([SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide][SHO.SuccRLAddUESide][SHO.SuccRLDelUESide])[SHO.FailRLAddUESide.Cfg
Unsup][SHO.FailRLAddUESide.Isr][SHO.FailRLAddUESide.Inv
Cfg][SHO.FailRLAddUESide.No
Reply]
793
PRS
Performance Report Reference
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
InterFRe
quest
HHO
Failed
VS.HHO.InterFreq.F
ailOut
none
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.AttOut][VS.HHO.InterFreq.SuccOut]
VS.HHO.InterFreq.
AttOut
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CfgUnsupp
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.PyhChFail
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.FailUSR
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CellUpdt
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CfgInvalid
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.NoReply
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.DLCodeRej
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.ULAdmsnDeny
times
Hard
Handover
Measuremen
t per cell
794
PRS
Performance Report Reference
Subrep
ort
Name
CS
InterRAT
HHO
Failed
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HHO.InterFreqO
ut.DLAdmsnDeny
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreq.F
ailOther
none
Hard
Handover
Measuremen
t per cell
([VS.HHO.InterFreq.AttOut][VS.HHO.InterFreq.SuccOut])
[VS.HHO.InterFreqOut.CfgU
nsupp][VS.HHO.InterFreqOut.PyhC
hFail][VS.HHO.InterFreqOut.FailU
SR][VS.HHO.InterFreqOut.CellU
pdt][VS.HHO.InterFreqOut.CfgIn
valid][VS.HHO.InterFreqOut.NoRe
ply]
VS.IRATHO.FailOu
tCS
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutCS][IRATHO.SuccOutCS]
IRATHO.AttOutCS
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutCS.
CfgUnsupp
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutCS.
PhyChFail
times
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.FailOu
tCS.Other
none
InterRAT
Handover
Measuremen
t per cell
([IRATHO.AttOutCS][IRATHO.SuccOutCS])[IRATHO.FailOutCS.CfgUns
upp][IRATHO.FailOutCS.PhyChF
ail]
795
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS
InterRAT
HHO
Failed
VS.IRATHO.FailOu
tPSUTRAN.Cell
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutPSUTRAN][IRATHO.SuccOutPSUTRAN
]
IRATHO.AttOutPS
UTRAN
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutPS
UTRAN.CfgUnsupp
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutPS
UTRAN.PhyChFail
times
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.FailOu
tPSUTRAN.Other
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutPSUTRAN][IRATHO.SuccOutPSUTRAN
][IRATHO.FailOutPSUTRAN.
CfgUnsupp][IRATHO.FailOutPSUTRAN.
PhyChFail]
VS.HSDPA.ServCell
Chg.SHO.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.At
tOut][VS.HSDPA.SHO.CellChg.Su
ccOut]
VS.HSDPA.SHO.Ce
llChg.AttOut
times
HSDPA
Measuremen
t per cell
HSDPA
HHO
IntraFRe
quest
NoChR
Fail
VS.HSDPA.ServCell
Chg.HHO.IntraFreq.
NoChR.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.AttOutIntr
aFreq][VS.HSDPA.HHO.SuccOutInt
raFreq]
VS.HSDPA.HHO.At
tOutIntraFreq
times
HSDPA
Measuremen
t per cell
HSDPA
HHO
InterFRe
quest
VS.HSDPA.ServCell
Chg.HHO.InterFreq.
NoChR.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.AttOutInte
rFreq][VS.HSDPA.HHO.SuccOutInt
erFreq]
HSDPA
ServCell
Chg
SHO Fail
Issue 01 (2016-09-15)
796
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
NoChR
Fail
VS.HSDPA.HHO.At
tOutInterFreq
times
HSDPA
Measuremen
t per cell
HSUPA
EDCH
SHO Fail
VS.HSUPA.EDCH.
SHO.Fail
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.EDCH.SHO.Att]
[VS.HSUPA.EDCH.SHO.Suc
c]
VS.HSUPA.EDCH.
SHO.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.SHO.Se
rvCellChg.Fail
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.SHO.ServCellCh
g.Att][VS.HSUPA.SHO.ServCellCh
g.Succ]
VS.HSUPA.SHO.Se
rvCellChg.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.HHO.In
terFreq.NoChR.Fail
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.HHO.InterFreq.
NoChR.Att][VS.HSUPA.HHO.InterFreq.
NoChR.Succ]
VS.HSUPA.HHO.In
terFreq.NoChR.Att
times
HSUPA
Measuremen
t per cell
HSUPA
SHO
ServCell
Chg Fail
HSUPA
HHO
InterFRe
quest
NoChR
Fail
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Issue 01 (2016-09-15)
797
PRS
Performance Report Reference
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
KPI1
VS.AMR.RB.DL.
12.2
numb
er
Measuremen
t related to
AMR service
VS.RB.DLConvCS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.R99PSLoad.DLT
hruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.HSDPAPSLoad.
DLThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.MBMSPSLoad.
DLThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
798
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Rate.Service
RRC
connection
setup
measurement
per RNC
(([VS.RRC.SuccConnEstab.O
rgConv]+
[VS.RRC.SuccConnEstab.Org
Str]+
[VS.RRC.SuccConnEstab.Org
Int]+
[VS.RRC.SuccConnEstab.Org
Bkg]+
[VS.RRC.SuccConnEstab.Org
Subs]+
[VS.RRC.SuccConnEstab.Tr
mConv]+
[VS.RRC.SuccConnEstab.Tr
mStr]+
[VS.RRC.SuccConnEstab.Tr
mInt]+
[VS.RRC.SuccConnEstab.Tr
mBkg]+
[VS.RRC.SuccConnEstab.Org
HPSi]+
[VS.RRC.SuccConnEstab.Og
LPSig]+
[VS.RRC.SuccConnEstab.Tm
HPSi]+
[VS.RRC.SuccConnEstab.Tm
LPSi]+
[VS.RRC.SuccConnEstab.Res
t]))/
(([VS.RRC.AttConnEstab.Org
Conv]+
[VS.RRC.AttConnEstab.OrgS
tr]+
[VS.RRC.AttConnEstab.OrgI
nt]+
[VS.RRC.AttConnEstab.OrgB
kg]+
[VS.RRC.AttConnEstab.OrgS
ubs]+
[VS.RRC.AttConnEstab.Trm
Conv]+
[VS.RRC.AttConnEstab.TrmS
tr]+
[VS.RRC.AttConnEstab.TrmI
nt]+
[VS.RRC.AttConnEstab.Trm
Bkg]+
[VS.RRC.AttConnEstab.OrgH
PSig]+
799
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[VS.RRC.AttConnEstab.OrgL
PSig]+
[VS.RRC.AttConnEstab.TmH
PSig]+
[VS.RRC.AttConnEstab.TmL
PSig]+
[VS.RRC.AttConnEstab.Rest]
))*{100.00}
Issue 01 (2016-09-15)
VS.RRC.SuccConn
Estab.Rate.Other
RRC
connection
setup
measurement
per RNC
([VS.RRC.SuccConnEstab.E
mg]+
[VS.RRC.SuccConnEstab.Cell
Res]+
[VS.RRC.SuccConnEstab.Reg
]+
[VS.RRC.SuccConnEstab.Det
ach]+
[VS.RRC.SuccConnEstab.Un
known])/
([VS.RRC.AttConnEstab.Emg
]+
[VS.RRC.AttConnEstab.CellR
es]+
[VS.RRC.AttConnEstab.Reg]
+
[VS.RRC.AttConnEstab.Detac
h]+
[VS.RRC.AttConnEstab.Unkn
own])*{100.00}
RAB.SuccEstabCSC
onv0.32.RNC.Rate
Measuremen
t of CS RAB
assignment
setup per
RNC
[VS.RAB.SucEstCSConv0.32.
RNC]/
[VS.RAB.AttEstCSConv0.32.
RNC]*{100.00}
RAB.SuccEstabCSC
onv32.64.RNC.Rate
Measuremen
t of CS RAB
assignment
setup per
RNC
[VS.RAB.SucEstCSConv32.6
4.RNC]/
[VS.RAB.AttEstCSConv32.64
.RNC]*{100.00}
800
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstPS.
RNC.Rate
Measuremen
t of PS RAB
assignment
setup per
RNC
(([RAB.SuccEstabPSNoQueuing.Bgrd]+
[RAB.SuccEstabPSQueuing.Bgrd])+
([RAB.SuccEstabPSNoQueuing.Conv]+
[RAB.SuccEstabPSQueuing.Conv])+
([RAB.SuccEstabPSNoQueuing.Intact]+
[RAB.SuccEstabPSQueuing.Intact])+
([RAB.SuccEstabPSQueuing.Strm]+
[RAB.SuccEstabPSNoQueuing.Strm]))/
([RAB.AttEstabPS.Bgrd]+
[RAB.AttEstabPS.Strm]+
[RAB.AttEstabPS.Intact]+
[RAB.AttEstabPS.Conv])*{10
0.00}
VS.SHO.Factor.RL
none
Soft
Handover
Measuremen
t per RNC
([VS.SHO.AS.1]+
[VS.SHO.AS.2Softer]*{2}+
[VS.SHO.AS.2Soft]*{2}+
[VS.SHO.AS.3Softer]*{3}+
[VS.SHO.AS.3Soft]*{3}+
[VS.SHO.AS.
3Soft2Softer]*{3}+
[VS.SHO.AS.4]*{4}+
[VS.SHO.AS.5]*{5}+
[VS.SHO.AS.6]*{6})/
([VS.SHO.AS.1]+
[VS.SHO.AS.2Softer]+
[VS.SHO.AS.2Soft]+
[VS.SHO.AS.3Softer]+
[VS.SHO.AS.3Soft]+
[VS.SHO.AS.3Soft2Softer]+
[VS.SHO.AS.4]+
[VS.SHO.AS.5]+
[VS.SHO.AS.6])-{1}
VS.SHO.Succ.Rate
Soft
Handover
Measuremen
t per RNC
[VS.SHO.Succ]/
[VS.SHO.Att.RNC]*{100.00}
801
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.InterFreq.HHO.S
ucc.RNC.Rate
Hard
Handover
Measuremen
t per RNC
[VS.HHO.InterFreq.Succ.RN
C]/
[VS.HHO.InterFreq.Att.RNC
]*{100.00}
VS.IRATHO.SuccC
SOut.RNC.Rate
Measuremen
t related to
CS IRA
handover per
RNC
[VS.IRATHO.SuccCSOut.RN
C]/
[VS.IRATHO.AttCSOut.RNC
]*{100.00}
VS.IRATHO.SuccP
SOutUTRAN.RNC.
Rate
Measuremen
t related to
PS IRA
handover per
RNC
[VS.IRATHO.SuccPSOutUTR
AN.RNC]/
[VS.IRATHO.AttPSOutUTR
AN.RNC]*{100.00}
VS.AMR.Call.Drop.
RNC.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
[VS.RAB.Loss.CS.AMR.RNC
]/
[VS.RAB.SucEstCSConv0.32.
RNC]*{100.00}
VS.VP.Call.Drop.R
NC.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
[VS.RAB.Loss.CS.Conv64K.
RNC]/
[VS.RAB.SucEstCSConv32.6
4.RNC]*{100.00}
802
PRS
Performance Report Reference
Subrep
ort
Name
KPI2
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.PS.Call.Drop.R
NC.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
(([VS.RAB.Loss.PS.RF.RNC]
+
[VS.RAB.Loss.PS.Abnorm.R
NC]))/
(([RAB.SuccEstabPSNoQueuing.Bgrd]+
[RAB.SuccEstabPSQueuing.Bgrd])+
([RAB.SuccEstabPSNoQueuing.Conv]+
[RAB.SuccEstabPSQueuing.Conv])+
([RAB.SuccEstabPSNoQueuing.Intact]+
[RAB.SuccEstabPSQueuing.Intact])+
([RAB.SuccEstabPSQueuing.Strm]+
[RAB.SuccEstabPSNoQueuing.Strm]))*{100.00}
VS.HSDPA.MeanCh
Throughput.TotalM
Bytes
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]/
({1024}*{1024})
VS.HSDPA.UE.Mea
n.Cell
numb
er
HSDPA
Measuremen
t per cell
VS.HSDPA.MeanCh
Throughput.TotalM
Bps
none
HSDPA
Measuremen
t per cell
([VS.HSDPA.MeanChThroug
hput.TotalBytes]*{8.0}/
({1024.0}*{1024.0}))/
({GP}*{60})
VS.HSDPA.RAB.Su
ccEstab.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]
/
[VS.HSDPA.RAB.AttEstab
]*{100.00}
VS.HSDPA.ServCell
Chg.Succ.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.Su
ccOut]/
[VS.HSDPA.SHO.CellChg.At
tOut]*{100.00}
VS.HSDPA.HHO.In
traFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInt
raFreq]/
[VS.HSDPA.HHO.AttOutIntr
aFreq]*{100.00}
803
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.HHO.In
terFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInt
erFreq]/
[VS.HSDPA.HHO.AttOutInte
rFreq]*{100.00}
VS.HSDPA.ChR.HS
DSCHtoDCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH]/
[VS.HSDPA.ChR.HSDSCHto
DCH.Att]*{100.00}
VS.HSDPA.ChR.DC
HtoHSDSCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH]/
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att]*{100.00}
VS.HSDPA.RAB.A
bnormRel.Rate
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.InAct
ivity]+
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.Succ
OutIntraFreq]+
[VS.HSDPA.HHO.H2D.Succ
OutInterFreq])*{100.00}
VS.HSUPA.RAB.Su
ccEstab.Rate
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.SuccEstab]
/
[VS.HSUPA.RAB.AttEstab
]*{100.00}
VS.HSUPA.EDCH.
SHO.Succ.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.EDCH.SHO.Suc
c]/
[VS.HSUPA.EDCH.SHO.Att
]*{100.00}
VS.HSUPA.SHO.Se
rvCellChg.Succ.Rati
o
HSUPA
Measuremen
t per cell
[VS.HSUPA.SHO.ServCellCh
g.Succ]/
[VS.HSUPA.SHO.ServCellCh
g.Att]*{100.00}
804
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.HHO.InterFreq.
NoChR.Succ]/
[VS.HSUPA.HHO.InterFreq.
NoChR.Att]*{100.00}
VS.HSUPA.RAB.A
bnormRel.Rate
HSUPA
Measuremen
t per cell
([VS.HSUPA.RAB.Loss.Abno
rm])/
([VS.HSUPA.RAB.Loss.Abno
rm]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ])*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Issue 01 (2016-09-15)
805
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
AMR
12.2
Traffic
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RRC.SuccConn
Estab.Cell.Rate
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.sum]/
[VS.RRC.AttConnEstab.Cell
]*{100.00}
VS.HHO.InterFreq.
Out.Cell.Rate
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.SuccOut]/
[VS.HHO.InterFreq.AttOut]*{
100.00}
VS.MeanTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSInt.Tx
byte
Traffic
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSBkg.Tx
byte
Traffic
Measuremen
t per cell
VS.MaxRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MinRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MaxTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
806
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*{1
00.00}
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*{
100.00}
VS.SuccRBSetup.Ce
ll.Rate
Measuremen
t of RB
Procedure
per cell
[VS.SuccRBSetup]/
[VS.AttRBSetup]*{100.00}
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*{100.00
}
807
PRS
Performance Report Reference
Subrep
ort
Name
VP
Traffic
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
VS.CS.VP.Call.Drop
.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*{1
00.00}
VS.PCH.Utilization.
Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesPC
H.Tx]/
([VS.CRNC.IUB.PCH.Bandw
idth]*{GP}*{60})*{100.00}
VS.FACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesFA
CH.Tx]/
([VS.CRNC.IUB.FACH.Band
width]*{GP}*{60})*{100.00}
VS.RACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesRA
CH.Rx]/
([VS.CRNC.IUB.RACH.Band
width]*{GP}*{60})*{100.00}
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RRC.SuccConn
Estab.Cell.Rate
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.sum]/
[VS.RRC.AttConnEstab.Cell
]*{100.00}
VS.HHO.InterFreq.
Out.Cell.Rate
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.SuccOut]/
[VS.HHO.InterFreq.AttOut]*{
100.00}
808
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.MeanTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSInt.Tx
byte
Traffic
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSBkg.Tx
byte
Traffic
Measuremen
t per cell
VS.MaxRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MinRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MaxTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
809
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*{1
00.00}
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*{
100.00}
VS.SuccRBSetup.Ce
ll.Rate
Measuremen
t of RB
Procedure
per cell
[VS.SuccRBSetup]/
[VS.AttRBSetup]*{100.00}
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*{100.00
}
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
VS.CS.VP.Call.Drop
.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
810
PRS
Performance Report Reference
Subrep
ort
Name
PS384
Traffic
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*{1
00.00}
VS.PCH.Utilization.
Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesPC
H.Tx]/
([VS.CRNC.IUB.PCH.Bandw
idth]*{GP}*{60})*{100.00}
VS.FACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesFA
CH.Tx]/
([VS.CRNC.IUB.FACH.Band
width]*{GP}*{60})*{100.00}
VS.RACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesRA
CH.Rx]/
([VS.CRNC.IUB.RACH.Band
width]*{GP}*{60})*{100.00}
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RRC.SuccConn
Estab.Cell.Rate
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.sum]/
[VS.RRC.AttConnEstab.Cell
]*{100.00}
VS.HHO.InterFreq.
Out.Cell.Rate
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.SuccOut]/
[VS.HHO.InterFreq.AttOut]*{
100.00}
VS.MeanTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSInt.Tx
byte
Traffic
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSBkg.Tx
byte
Traffic
Measuremen
t per cell
811
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.MaxRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MinRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MaxTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*{1
00.00}
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
812
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*{
100.00}
VS.SuccRBSetup.Ce
ll.Rate
Measuremen
t of RB
Procedure
per cell
[VS.SuccRBSetup]/
[VS.AttRBSetup]*{100.00}
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*{100.00
}
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
VS.CS.VP.Call.Drop
.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*{1
00.00}
VS.PCH.Utilization.
Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesPC
H.Tx]/
([VS.CRNC.IUB.PCH.Bandw
idth]*{GP}*{60})*{100.00}
813
PRS
Performance Report Reference
Subrep
ort
Name
HSDPA
Traffic
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.FACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesFA
CH.Tx]/
([VS.CRNC.IUB.FACH.Band
width]*{GP}*{60})*{100.00}
VS.RACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesRA
CH.Rx]/
([VS.CRNC.IUB.RACH.Band
width]*{GP}*{60})*{100.00}
VS.HSDPA.MeanCh
Throughput.TotalM
Bytes
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]/
({1024}*{1024})
VS.HSDPA.Kbps.M
eanChThroughput
none
HSDPA
Measuremen
t per cell
{8}*[VS.HSDPA.MeanChThr
oughput.TotalBytes]/
({GP}*{60}*{1024})
VS.HSDPA.MeanCh
Throughput.TotalM
Bps
none
HSDPA
Measuremen
t per cell
([VS.HSDPA.MeanChThroug
hput.TotalBytes]*{8.0}/
({1024.0}*{1024.0}))/
({GP}*{60})
VS.HSDPA.UE.Mea
n.Cell
numb
er
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.Su
ccEstab.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]
/
[VS.HSDPA.RAB.AttEstab
]*{100.00}
VS.HSDPA.ChR.HS
DSCHtoDCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH]/
[VS.HSDPA.ChR.HSDSCHto
DCH.Att]*{100.00}
VS.HSDPA.ChR.DC
HtoHSDSCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH]/
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att]*{100.00}
VS.HSDPA.MACD
AttStpPerCell
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MACDSuccStpP
erCell]+
[VS.HSDPA.MACDFailStpPe
rCell]
VS.HSDPA.RAB.Fa
ilEstab
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.AttEstab][VS.HSDPA.RAB.SuccEstab]
814
PRS
Performance Report Reference
Subrep
ort
Name
HSDPA
Traffic
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.ChR.FA
CHtoHSDSCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.FACHtoHS
DSCH.Att][VS.HSDPA.ChR.FACHtoHS
DSCH]
VS.HSDPA.ChR.HS
DSCHtoFACH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
FACH.Att][VS.HSDPA.ChR.HSDSCHto
FACH]
VS.HSDPA.ChR.HS
DSCHtoDCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH.Att][VS.HSDPA.ChR.HSDSCHto
DCH]
VS.HSDPA.ChR.DC
HtoHSDSCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att][VS.HSDPA.ChR.DCHtoHSD
SCH]
VS.HSDPA.MACD
SuccStpPerCell
times
HSDPA
Measuremen
t per cell
VS.HSUPA.MeanCh
Throughput.TotalM
Bytes
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.MeanChThrough
put.TotalBytes]/
({1024}*{1024})
VS.HSUPA.Kbps.M
eanChThroughput
none
HSUPA
Measuremen
t per cell
{8}*[VS.HSUPA.MeanChThr
oughput.TotalBytes]/
({GP}*{60}*{1024})
VS.HSUPA.UE.Mea
n.Cell
numb
er
HSUPA
Measuremen
t per cell
VS.HSUPA.RAB.Su
ccEstab.Rate
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.SuccEstab]
/
[VS.HSUPA.RAB.AttEstab
]*{100.00}
VS.HSUPA.RAB.Fa
ilEstab
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.AttEstab][VS.HSUPA.RAB.SuccEstab]
815
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VIC KPI
VS.Call.Drop.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm])+
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])
VS.RRC.SuccConn
Estab.Cell.Rate
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.sum]/
[VS.RRC.AttConnEstab.Cell
]*{100.00}
VS.HHO.InterFreq.
Out.Cell.Rate
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.SuccOut]/
[VS.HHO.InterFreq.AttOut]*{
100.00}
VS.MeanTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
816
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.MAC.SRNCIub
BytesPSInt.Tx
byte
Traffic
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSBkg.Tx
byte
Traffic
Measuremen
t per cell
VS.MaxRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MinRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MaxTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
817
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*{1
00.00}
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*{
100.00}
VS.SuccRBSetup.Ce
ll.Rate
Measuremen
t of RB
Procedure
per cell
[VS.SuccRBSetup]/
[VS.AttRBSetup]*{100.00}
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*{100.00
}
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
VS.CS.VP.Call.Drop
.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
818
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*{1
00.00}
VS.PCH.Utilization.
Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesPC
H.Tx]/
([VS.CRNC.IUB.PCH.Bandw
idth]*{GP}*{60})*{100.00}
VS.FACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesFA
CH.Tx]/
([VS.CRNC.IUB.FACH.Band
width]*{GP}*{60})*{100.00}
VS.RACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesRA
CH.Rx]/
([VS.CRNC.IUB.RACH.Band
width]*{GP}*{60})*{100.00}
VS.HSDPA.RAB.Su
ccEstab.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]
/
[VS.HSDPA.RAB.AttEstab
]*{100.00}
VS.HSDPA.RAB.A
bnormRel.Rate
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.InAct
ivity]+
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.Succ
OutIntraFreq]+
[VS.HSDPA.HHO.H2D.Succ
OutInterFreq])*{100.00}
VS.HSDPA.ServCell
Chg.Succ.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.Su
ccOut]/
[VS.HSDPA.SHO.CellChg.At
tOut]*{100.00}
819
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.ChR.HS
DSCHtoDCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH]/
[VS.HSDPA.ChR.HSDSCHto
DCH.Att]*{100.00}
VS.HSDPA.ChR.DC
HtoHSDSCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH]/
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att]*{100.00}
VS.HSDPA.HHO.In
traFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInt
raFreq]/
[VS.HSDPA.HHO.AttOutIntr
aFreq]*{100.00}
VS.HSDPA.HHO.In
terFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInt
erFreq]/
[VS.HSDPA.HHO.AttOutInte
rFreq]*{100.00}
VS.HSUPA.RAB.Su
ccEstab.Rate
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.SuccEstab]
/
[VS.HSUPA.RAB.AttEstab
]*{100.00}
VS.HSUPA.RAB.A
bnormRel.Rate
HSUPA
Measuremen
t per cell
([VS.HSUPA.RAB.Loss.Abno
rm])/
([VS.HSUPA.RAB.Loss.Abno
rm]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ])*{100.00}
VS.HSUPA.EDCH.
SHO.Succ.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.EDCH.SHO.Suc
c]/
[VS.HSUPA.EDCH.SHO.Att
]*{100.00}
VS.HSUPA.SHO.Se
rvCellChg.Succ.Rati
o
HSUPA
Measuremen
t per cell
[VS.HSUPA.SHO.ServCellCh
g.Succ]/
[VS.HSUPA.SHO.ServCellCh
g.Att]*{100.00}
820
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.HHO.InterFreq.
NoChR.Succ]/
[VS.HSUPA.HHO.InterFreq.
NoChR.Att]*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS Call
Drop
Cells
VS.CS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm]
821
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstab
CS.Cell
none
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstabCS.Conv]
+[VS.RAB.SuccEstabCS.Str]
VS.RAB.RelReqCS.
OM
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqCS.
RABPreempt
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqCS.
UTRANgen
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.RLCRst
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.ULSync
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.UuNoReply
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
822
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.CS.R
F.Oth
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.A
al2Loss
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.Call.Drop.CS.Ot
her
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Abnorm][VS.RAB.RelReqCS.OM][VS.RAB.RelReqCS.UTRAN
gen][VS.RAB.RelReqCS.RABPre
empt][VS.RAB.Loss.CS.Aal2Loss]
VS.Cell.UnavailTim
e.OM
Measuremen
t related to
Algorithm
per cell
VS.Cell.UnavailTim
e.OM.Rate
Measuremen
t related to
Algorithm
per cell
[VS.Cell.UnavailTime.OM]*{
100}/({GP}*{60})*{100.00}
VP Call
Drops
VS.CS.VP.Call.Drop
.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]
AMR
Call
Drops
VS.CS.AMR.Call.D
rop.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]
Cell
Unavaila
ble
Issue 01 (2016-09-15)
823
PRS
Performance Report Reference
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS Drop
Cells
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
VS.RAB.SuccEstPS.
Cell
none
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.SuccEstabPS.Conv]
+[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+[VS.RAB.SuccEstabPS.Bkg]
VS.RAB.RelReqPS.
OM
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqPS.
RABPreempt
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqPS.
UTRANgen
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.RLCRst
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.ULSync
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
824
PRS
Performance Report Reference
Subrep
ort
Name
RRC Fail
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.PS.R
F.UuNoReply
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.Oth
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.G
TPULoss
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.Call.Drop.PS.Ot
her
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.Abnorm][VS.RAB.RelReqPS.OM][VS.RAB.RelReqPS.RABPree
mpt][VS.RAB.Loss.PS.GTPULoss
]
VS.RRC.FailConnE
stab.Cell
times
RRC
connection
setup
measurement
per cell
[VS.RRC.AttConnEstab.Cell][RRC.SuccConnEstab.sum]
VS.RRC.AttConEst.
Cell
none
RRC
connection
setup
measurement
per cell
[VS.RRC.AttConEst.DCH]+
[VS.RRC.AttConEst.CCH]
VS.RRC.Rej.RL.Fai
l
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.TNL.F
ail
times
RRC
connection
reject
measurement
per cell
825
PRS
Performance Report Reference
Subrep
ort
Name
CS RAB
FAIL
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.Rej.Power.
Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.UL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.DL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Code.C
ong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Other.
Cong
times
RRC
connection
reject
measurement
per cell
[RRC.FailConnEstab.Cong][VS.RRC.Rej.Power.Cong][VS.RRC.Rej.Code.Cong][VS.RRC.Rej.UL.CE.Cong][VS.RRC.Rej.DL.CE.Cong]
RRC.FailConnEstab.
NoReply
times
RRC
connection
reject
measurement
per cell
VS.RAB.FailEstabC
S.Cell
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.AttEstabCS.Conv]+
[VS.RAB.AttEstabCS.Str][VS.RAB.SuccEstabCS.Conv]
-[VS.RAB.SuccEstabCS.Str]
VS.RAB.AttEstabC
S.Cell
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.AttEstabCS.Conv]+
[VS.RAB.AttEstabCS.Str]
VS.RAB.FailEstabC
S.TNL
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
826
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstCS.
Relo
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCS.
RIPFail
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
Power.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
ULCE.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
DLCE.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
Code.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.I
UB.Band
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstabC
S.RNL.Other
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
[VS.RAB.FailEstabCS.RNL][VS.RAB.FailEstCS.Relo][VS.RAB.FailEstCS.RIPFail][VS.RAB.FailEstabCS.Cong]
827
PRS
Performance Report Reference
Subrep
ort
Name
PS RAB
FAIL
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstabC
S.other.CELL
none
Measuremen
t of CS RAB
assignment
setup per cell
([VS.RAB.AttEstabCS.Conv]
+[VS.RAB.AttEstabCS.Str][VS.RAB.SuccEstabCS.Conv]
-[VS.RAB.SuccEstabCS.Str])[VS.RAB.FailEstabCS.RNL][VS.RAB.FailEstabCS.TNL]
VS.RAB.FailEstabP
S.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
VS.RAB.FailEstPS.
TNL
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
RIPFail
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
Par
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
Relo
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
828
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstPs.P
ower.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
Code.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
ULCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
DLCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.I
UB.Band
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FlEstPS.R
NL.Other
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
[VS.RAB.FailEstPS.RNL][VS.RAB.FailEstPS.RIPFail][VS.RAB.FailEstPS.Par][VS.RAB.FailEstPS.Relo][VS.RAB.FailEstPS.Unsp]
VS.RAB.FailEstabP
S.Other.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
(([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg]))
-[VS.RAB.FailEstPS.TNL][VS.RAB.FailEstPS.RNL]
829
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
(cluster)
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
PS.Inter.KByte.DL.
Throughput
none
Measuremen
t related to
throughput
per cell
([VS.PS.Int.DL.8.Thruput]/
({1024}*{8}))+
([VS.PS.Int.DL.64.Thruput]/
({1024}*{8}))+
([VS.PS.Int.DL.128.Thruput]/
({1024}*{8}))+
([VS.PS.Int.DL.384.Thruput]/
({1024}*{8}))
830
PRS
Performance Report Reference
Subrep
ort
Name
Through
put
(cluster)
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
PS.Bkg.KByte.DL.T
hroughput
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.DL.8.Thruput]/
({1024}*{8}))+
([VS.PS.Bkg.DL.64.Thruput]/
({1024}*{8}))+
([VS.PS.Bkg.DL.
128.Thruput]/({1024}*{8}))+
([VS.PS.Bkg.DL.
384.Thruput]/({1024}*{8}))
VS.HSDPA.MeanCh
Throughput.TotalM
Bytes
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]/
({1024}*{1024})
VS.AMR.Call.Durat
ion
none
Measuremen
t of RB
Procedure
per cell
([VS.AMR.Ctrl.DL12.2]*{60
}*{60})/
[VS.RAB.SuccEstab.AMR]
VS.HSDPA.Kbps.M
eanChThroughput
none
HSDPA
Measuremen
t per cell
{8}*[VS.HSDPA.MeanChThr
oughput.TotalBytes]/
({GP}*{60}*{1024})
VS.PS.Throughput.
DL64.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.DL.64.Thruput]/
[VS.PS.Bkg.DL.64.Times])+
([VS.PS.Int.DL.64.Thruput]/
[VS.PS.Int.DL.64.Times])
VS.PS.Throughput.
DL128.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.DL.
128.Thruput]/[VS.PS.Bkg.DL.
128.Times])+([VS.PS.Int.DL.
128.Thruput]/[VS.PS.Int.DL.
128.Times])
VS.PS.Throughput.
DL384.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.DL.
384.Thruput]/[VS.PS.Bkg.DL.
384.Times])+([VS.PS.Int.DL.
384.Thruput]/[VS.PS.Int.DL.
384.Times])
VS.PS.Throughput.
UL64.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.UL.64.Thruput]/
[VS.PS.Bkg.UL.64.Times])+
([VS.PS.Int.UL.64.Thruput]/
[VS.PS.Int.UL.64.Times])
VS.PS.Throughput.
UL128.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.UL.
128.Thruput]/[VS.PS.Bkg.UL.
128.Times])+([VS.PS.Int.UL.
128.Thruput]/[VS.PS.Int.UL.
128.Times])
831
PRS
Performance Report Reference
Subrep
ort
Name
Access
(cluster)
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.PS.Throughput.
UL384.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.UL.
384.Thruput]/[VS.PS.Bkg.UL.
384.Times])+([VS.PS.Int.UL.
384.Thruput]/[VS.PS.Int.UL.
384.Times])
Call.Setup.Success.
Rate.AMR
RRC
connection
setup
measurement
per cell
(([RRC.SuccConnEstab.sum])
/
([VS.RRC.AttConnEstab.Cell]
))*([VS.RAB.SuccEstab.AMR
]/[VS.RAB.AttEstab.AMR])
Call.Setup.Success.
Rate.VP
RRC
connection
setup
measurement
per cell
(([RRC.SuccConnEstab.sum])
/
([VS.RRC.AttConnEstab.Cell]
))*([VS.RAB.SuccEstCS.Con
v.64]/
[VS.RAB.AttEstCS.Conv.64])
Call.Setup.Success.
Rate.AMR_VP
RRC
connection
setup
measurement
per cell
(([RRC.SuccConnEstab.sum])
/
([VS.RRC.AttConnEstab.Cell]
))*(([VS.RAB.SuccEstab.AM
R]+
[VS.RAB.SuccEstCS.Conv.
64])/
([VS.RAB.AttEstab.AMR]+
[VS.RAB.AttEstCS.Conv.
64]))
Call.Setup.Success.
Rate.PS
RRC
connection
setup
measurement
per cell
(([RRC.SuccConnEstab.sum])
/
([VS.RRC.AttConnEstab.Cell]
))*(([VS.RAB.SuccEstabPS.C
onv]+
[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]))
832
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC.Setup.Success.
Rate.Conv
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OgCo
nvCall]+
[RRC.SuccConnEstab.TmCon
vCall])/
([RRC.AttConnEstab.TmCon
vCall]+
[RRC.AttConnEstab.OrgConv
Call])
RRC.Setup.Success.
Conv
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.OgCon
vCall]+
[RRC.SuccConnEstab.TmCon
vCall]
RRC.Setup.Attempt.
Conv
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.OrgConv
Call]
RRC.Setup.Success.
Rate.Str
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OrgStr
Call]+
[RRC.SuccConnEstab.TmStr
Call])/
([RRC.AttConnEstab.TmStrC
all]+
[RRC.AttConnEstab.OrgStrCa
ll])
RRC.Setup.Success.
Str
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.OrgStr
Call]+
[RRC.SuccConnEstab.TmStr
Call]
RRC.Setup.Attempt.
Str
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.OrgStrCa
ll]
833
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC.Setup.Success.
Rate.BESer
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OrgItr
Call]+
[RRC.SuccConnEstab.OrgBkg
Call]+
[RRC.SuccConnEstab.TmItrC
all]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.TmHhP
rSig])/
([RRC.AttConnEstab.TmInter
Call]+
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.OrgInter
Call]+
[RRC.AttConnEstab.OrgBkgC
all]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.TmHhPr
Sig])
RRC.Setup.Success.
BESer
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.OrgItrC
all]+
[RRC.SuccConnEstab.OrgBkg
Call]+
[RRC.SuccConnEstab.TmItrC
all]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.TmHhP
rSig]
834
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC.Setup.Attempt.
BESer
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.TmInter
Call]+
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.OrgInter
Call]+
[RRC.AttConnEstab.OrgBkgC
all]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.TmHhPr
Sig]
835
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Other_ORO.R
ate.Cell
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.EmgC
all]+
[RRC.SuccConnEstab.IRATC
elRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
+
[RRC.SuccConnEstab.Unkow
n]+
[RRC.SuccConnEstab.OrgSub
Call]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig]+
[RRC.SuccConnEstab.CallRe
Est])/
([RRC.AttConnEstab.EmgCal
l]+
[RRC.AttConnEstab.IRATCel
Res]+
[RRC.AttConnEstab.IRATCC
O]+[RRC.AttConnEstab.Reg]
+[RRC.AttConnEstab.Detach]
+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgSubC
all]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t])
836
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC.SuccConnEsta
b.Other_ORO.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.EmgCa
ll]+
[RRC.SuccConnEstab.IRATC
elRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
+
[RRC.SuccConnEstab.Unkow
n]+
[RRC.SuccConnEstab.OrgSub
Call]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig]+
[RRC.SuccConnEstab.CallRe
Est]
RRC.AttConnEstab.
Other_ORO.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.IRATCel
Res]+
[RRC.AttConnEstab.IRATCC
O]+[RRC.AttConnEstab.Reg]
+[RRC.AttConnEstab.Detach]
+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgSubC
all]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*{1
00.00}
VS.RAB.SuccEstab.
AMR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
837
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.AttEstab.A
MR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstCS
.Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstCS.
Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.SuccEstab
CS.Rate.Cell.AMR_
VP
Measuremen
t of CS RAB
assignment
setup per cell
([VS.RAB.SuccEstCS.Conv.
64]+
[VS.RAB.SuccEstab.AMR])/
([VS.RAB.AttEstCS.Conv.
64]+
[VS.RAB.AttEstab.AMR])
VS.RAB.SuccEstab.
AMR_VP
none
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]+
[VS.RAB.SuccEstab.AMR]
VS.RAB.AttEstab.A
MR_VP
none
Measuremen
t of CS RAB
assignment
setup per cell
([VS.RAB.AttEstCS.Conv.
64]+
[VS.RAB.AttEstab.AMR])
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*{
100.00}
838
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstPS.
Cell
none
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.SuccEstabPS.Conv]
+[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+[VS.RAB.SuccEstabPS.Bkg]
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
VS.HSDPA.RAB.Su
ccEstab.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]
/
[VS.HSDPA.RAB.AttEstab
]*{100.00}
VS.HSDPA.RAB.Su
ccEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.At
tEstab
times
HSDPA
Measuremen
t per cell
RRC.Req.Call.Per.S
ervice
RRC
connection
setup
measurement
per cell
([VS.RRC.AttConnEstab.Cell]
)/
(([VS.RAB.SuccEstabCS.Con
v]+
[VS.RAB.SuccEstabCS.Str])+
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg]))
VS.RRC.AttConnEs
tab.Cell
times
RRC
connection
setup
measurement
per cell
VS.RAB.SuccEstab
CSPS.Cell
none
Measuremen
t of CS RAB
assignment
setup per cell
([VS.RAB.SuccEstabCS.Conv
]+
[VS.RAB.SuccEstabCS.Str])+
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])
839
PRS
Performance Report Reference
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CDR
(cluster)
Radio.Call.Drop.Rat
e.AMR
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF.AMR]/
[VS.RAB.SuccEstab.AMR]
VS.RAB.Loss.CS.R
F.AMR
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.SuccEstab.
AMR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
Radio.Call.Drop.Rat
e.VP
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.CS.RF][VS.RAB.Loss.CS.RF.AMR])
/[VS.RAB.SuccEstCS.Conv.
64]
VS.RAB.Loss.RF.V
P
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF][VS.RAB.Loss.CS.RF.AMR]
VS.RAB.SuccEstCS
.Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
Radio.Call.Drop.Rat
e.AMR_VP
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF]/
([VS.RAB.SuccEstCS.Conv.
64]+
[VS.RAB.SuccEstab.AMR])
VS.RAB.Loss.CS.R
F
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
840
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstab.
AMR_VP
none
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]+
[VS.RAB.SuccEstab.AMR]
VS.RAB.Loss.PS.R
F
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.SuccEstPS.
Cell
none
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.SuccEstabPS.Conv]
+[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+[VS.RAB.SuccEstabPS.Bkg]
Radio.Call.Drop.Rat
e.PS.HSDPA
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.RF]/
[VS.HSDPA.RAB.SuccEstab]
VS.HSDPA.RAB.Lo
ss.RF
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.Su
ccEstab
times
HSDPA
Measuremen
t per cell
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
VS.CS.AMR.Call.D
rop.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]
VS.CS.VP.Call.Drop
.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
841
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.CS.C
onv64K
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.CS.Call.Drop.Ra
te.Cell.AMR_VP
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Conv64K])
/([VS.RAB.SuccEstCS.Conv.
64]+
[VS.RAB.SuccEstab.AMR])
VS.CS.Call.Drop.Ce
ll.AMR_VP
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Conv64K]
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*{1
00.00}
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
842
PRS
Performance Report Reference
Subrep
ort
Name
HO
(cluster)
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.RAB.A
bnormRel.Rate
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.InAct
ivity]+
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.Succ
OutIntraFreq]+
[VS.HSDPA.HHO.H2D.Succ
OutInterFreq])*{100.00}
VS.HSDPA.RAB.A
bnormRel
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]
Radio.Link.Add.Suc
c.Rate
Soft
Handover
Measuremen
t per cell
[SHO.SuccRLAddUESide]/
[SHO.AttRLAddUESide]
SHO.SuccRLAddU
ESide
times
Soft
Handover
Measuremen
t per cell
SHO.AttRLAddUES
ide
times
Soft
Handover
Measuremen
t per cell
Radio.Link.Del.Succ
.Rate
Soft
Handover
Measuremen
t per cell
[SHO.SuccRLDelUESide]/
[SHO.AttRLDelUESide]
SHO.SuccRLDelUE
Side
times
Soft
Handover
Measuremen
t per cell
843
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
SHO.AttRLDelUESi
de
times
Soft
Handover
Measuremen
t per cell
VS.SHO.Success.Ce
ll.Rate
Soft
Handover
Measuremen
t per cell
([SHO.SuccRLAddUESide]+
[SHO.SuccRLDelUESide])/
([SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide])*{10
0.00}
VS.SHO.SuccUESid
e.Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.SuccRLAddUESide]+
[SHO.SuccRLDelUESide]
VS.SHO.AttUESide.
Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide]
HO.3G_2G.CS.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[VS.RAB.SuccEstab.AMR]
IRATHO.SuccOutC
S
times
InterRAT
Handover
Measuremen
t per cell
VS.RAB.SuccEstab.
AMR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*{100.00
}
IRATHO.AttOutCS
times
InterRAT
Handover
Measuremen
t per cell
844
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SHO
FAIL
VS.SHO.Fail.Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide][SHO.SuccRLAddUESide][SHO.SuccRLDelUESide]
VS.SHO.AttUESide.
Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide]
SHO.FailRLAddUE
Side.CfgUnsup
times
Soft
Handover
Measuremen
t per cell
SHO.FailRLAddUE
Side.Isr
times
Soft
Handover
Measuremen
t per cell
SHO.FailRLAddUE
Side.InvCfg
times
Soft
Handover
Measuremen
t per cell
845
PRS
Performance Report Reference
Subrep
ort
Name
InterFRe
quest
HHO
Fail
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
SHO.FailRLAddUE
Side.NoReply
times
Soft
Handover
Measuremen
t per cell
VS.SHO.Fail.Other.
Cell
none
Soft
Handover
Measuremen
t per cell
([SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide][SHO.SuccRLAddUESide][SHO.SuccRLDelUESide])[SHO.FailRLAddUESide.Cfg
Unsup][SHO.FailRLAddUESide.Isr][SHO.FailRLAddUESide.Inv
Cfg][SHO.FailRLAddUESide.No
Reply]
VS.HHO.InterFreq.F
ailOut
none
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.AttOut][VS.HHO.InterFreq.SuccOut]
VS.HHO.InterFreq.
AttOut
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CfgUnsupp
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.PyhChFail
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.FailUSR
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CellUpdt
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CfgInvalid
times
Hard
Handover
Measuremen
t per cell
846
PRS
Performance Report Reference
Subrep
ort
Name
CS
InterRAT
HHO
FAIL
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HHO.InterFreqO
ut.NoReply
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.DLCodeRej
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.ULAdmsnDeny
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.DLAdmsnDeny
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreq.F
ailOther
none
Hard
Handover
Measuremen
t per cell
([VS.HHO.InterFreq.AttOut][VS.HHO.InterFreq.SuccOut])
[VS.HHO.InterFreqOut.CfgU
nsupp][VS.HHO.InterFreqOut.PyhC
hFail][VS.HHO.InterFreqOut.FailU
SR][VS.HHO.InterFreqOut.CellU
pdt][VS.HHO.InterFreqOut.CfgIn
valid][VS.HHO.InterFreqOut.NoRe
ply]
VS.IRATHO.FailOu
tCS
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutCS][IRATHO.SuccOutCS]
IRATHO.AttOutCS
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutCS.
CfgUnsupp
times
InterRAT
Handover
Measuremen
t per cell
847
PRS
Performance Report Reference
Subrep
ort
Name
PS
InterRAT
HHO
FAIL
Counter
Coun
ter
Unit
Function
Subset
Formula
IRATHO.FailOutCS.
PhyChFail
times
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.FailOu
tCS.Other
none
InterRAT
Handover
Measuremen
t per cell
([IRATHO.AttOutCS][IRATHO.SuccOutCS])[IRATHO.FailOutCS.CfgUns
upp][IRATHO.FailOutCS.PhyChF
ail]
VS.IRATHO.FailOu
tPSUTRAN.Cell
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutPSUTRAN][IRATHO.SuccOutPSUTRAN
]
IRATHO.AttOutPS
UTRAN
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutPS
UTRAN.CfgUnsupp
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutPS
UTRAN.PhyChFail
times
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.FailOu
tPSUTRAN.Other
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutPSUTRAN][IRATHO.SuccOutPSUTRAN
][IRATHO.FailOutPSUTRAN.
CfgUnsupp][IRATHO.FailOutPSUTRAN.
PhyChFail]
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
848
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Hot
Traffic
Cell(AM
R Ctrl
DL12.2)
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RRC.SuccConn
Estab.Cell.Rate
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.sum]/
[VS.RRC.AttConnEstab.Cell
]*{100.00}
VS.HHO.InterFreq.
Out.Cell.Rate
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.SuccOut]/
[VS.HHO.InterFreq.AttOut]*{
100.00}
VS.MeanTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSInt.Tx
byte
Traffic
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSBkg.Tx
byte
Traffic
Measuremen
t per cell
VS.MaxRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
849
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.MinRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MaxTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*{1
00.00}
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
850
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*{
100.00}
VS.SuccRBSetup.Ce
ll.Rate
Measuremen
t of RB
Procedure
per cell
[VS.SuccRBSetup]/
[VS.AttRBSetup]*{100.00}
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*{100.00
}
VS.IRATHO.PS64.S
uccRelocOut.Cell.R
ate
InterRAT
Handover
Measuremen
t per cell
[VS.IRATHO.PS64.SuccRelo
cOut]/
[VS.IRATHO.PS64.ReqReloc
Out]
VS.IRATHO.PS128.
SuccRelocOut.Cell.
Rate
InterRAT
Handover
Measuremen
t per cell
[VS.IRATHO.PS128.SuccRel
ocOut]/
[VS.IRATHO.PS128.ReqRelo
cOut]
VS.IRATHO.PS384.
SuccRelocOut.Cell.
Rate
InterRAT
Handover
Measuremen
t per cell
[VS.IRATHO.PS384.SuccRel
ocOut]/
[VS.IRATHO.PS384.ReqRelo
cOut]
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
VS.CS.VP.Call.Drop
.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
851
PRS
Performance Report Reference
Subrep
ort
Name
Hot
Traffic
Cell(RB
DLInterP
S 384)
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*{1
00.00}
VS.PCH.Utilization.
Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesPC
H.Tx]/
([VS.CRNC.IUB.PCH.Bandw
idth]*{GP}*{60})*{100.00}
VS.FACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesFA
CH.Tx]/
([VS.CRNC.IUB.FACH.Band
width]*{GP}*{60})*{100.00}
VS.RACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesRA
CH.Rx]/
([VS.CRNC.IUB.RACH.Band
width]*{GP}*{60})*{100.00}
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RRC.SuccConn
Estab.Cell.Rate
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.sum]/
[VS.RRC.AttConnEstab.Cell
]*{100.00}
VS.HHO.InterFreq.
Out.Cell.Rate
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.SuccOut]/
[VS.HHO.InterFreq.AttOut]*{
100.00}
VS.MeanTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSInt.Tx
byte
Traffic
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSBkg.Tx
byte
Traffic
Measuremen
t per cell
852
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.MaxRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MinRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MaxTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*{1
00.00}
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
853
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*{
100.00}
VS.SuccRBSetup.Ce
ll.Rate
Measuremen
t of RB
Procedure
per cell
[VS.SuccRBSetup]/
[VS.AttRBSetup]*{100.00}
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*{100.00
}
VS.IRATHO.PS64.S
uccRelocOut.Cell.R
ate
InterRAT
Handover
Measuremen
t per cell
[VS.IRATHO.PS64.SuccRelo
cOut]/
[VS.IRATHO.PS64.ReqReloc
Out]
VS.IRATHO.PS128.
SuccRelocOut.Cell.
Rate
InterRAT
Handover
Measuremen
t per cell
[VS.IRATHO.PS128.SuccRel
ocOut]/
[VS.IRATHO.PS128.ReqRelo
cOut]
VS.IRATHO.PS384.
SuccRelocOut.Cell.
Rate
InterRAT
Handover
Measuremen
t per cell
[VS.IRATHO.PS384.SuccRel
ocOut]/
[VS.IRATHO.PS384.ReqRelo
cOut]
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
VS.CS.VP.Call.Drop
.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
854
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*{1
00.00}
VS.PCH.Utilization.
Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesPC
H.Tx]/
([VS.CRNC.IUB.PCH.Bandw
idth]*{GP}*{60})*{100.00}
VS.FACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesFA
CH.Tx]/
([VS.CRNC.IUB.FACH.Band
width]*{GP}*{60})*{100.00}
VS.RACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesRA
CH.Rx]/
([VS.CRNC.IUB.RACH.Band
width]*{GP}*{60})*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Issue 01 (2016-09-15)
855
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
RAB
Fail
VS.HSDPA.RAB.Fa
ilEstab
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.AttEstab][VS.HSDPA.RAB.SuccEstab]
VS.HSDPA.RAB.At
tEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.A
bnormRel
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]
VS.HSDPA.RAB.Re
l
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.InActi
vity]+
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.Succ
OutIntraFreq]+
[VS.HSDPA.HHO.H2D.Succ
OutInterFreq]
VS.HSDPA.MeanCh
Throughput.NEW
none
HSDPA
Measuremen
t per cell
({8}*[VS.HSDPA.MeanChTh
roughput.TotalBytes]/
([VS.HSDPA.MeanChThroug
hput.Times]))
VS.HSDPA.MeanCh
Throughput.TotalByt
es
byte
HSDPA
Measuremen
t per cell
VS.HSDPA.UE.Mea
n.Cell
numb
er
HSDPA
Measuremen
t per cell
VS.HSDPA.MACD.
Mean.Cell
numb
er
HSDPA
Measuremen
t per cell
VS.HSDPA.ServCell
Chg.HHO.IntraFreq.
NoChR.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.AttOutIntr
aFreq][VS.HSDPA.HHO.SuccOutInt
raFreq]
HSDPA
RAB
Abnorm
Rel
HSDPA
HHO
IntraFRe
Issue 01 (2016-09-15)
856
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
quest
Fail
VS.HSDPA.HHO.At
tOutIntraFreq
times
HSDPA
Measuremen
t per cell
HSDPA
HHO
InterFRe
quest
Fail
VS.HSDPA.ServCell
Chg.HHO.InterFreq.
NoChR.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.AttOutInte
rFreq][VS.HSDPA.HHO.SuccOutInt
erFreq]
VS.HSDPA.HHO.At
tOutInterFreq
times
HSDPA
Measuremen
t per cell
HSDPA
HSDSC
HtoDCH
Fail
VS.HSDPA.ChR.HS
DSCHtoDCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH.Att][VS.HSDPA.ChR.HSDSCHto
DCH]
VS.HSDPA.ChR.HS
DSCHtoDCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.DC
HtoHSDSCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att][VS.HSDPA.ChR.DCHtoHSD
SCH]
VS.HSDPA.ChR.DC
HtoHSDSCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ServCell
Chg.SHO.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.At
tOut][VS.HSDPA.SHO.CellChg.Su
ccOut]
VS.HSDPA.SHO.Ce
llChg.AttOut
times
HSDPA
Measuremen
t per cell
HSDPA
DCHtoH
SDSCH
Fail
HSDPA
ServCell
Chg Fail
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
857
PRS
Performance Report Reference
NE Type
RNC
Object Type
IUR Interface
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Iur
Performa
nce
VS.Iur.SHO.Att
times
Measuremen
t related to
SRNC in Iur
interface
VS.Iur.SHO.Succ
times
Measuremen
t related to
SRNC in Iur
interface
VS.IUR.SHO.Succ.
Rate
Measuremen
t related to
SRNC in Iur
interface
[VS.Iur.SHO.Succ]/
[VS.Iur.SHO.Att]*{100.00}
VS.SHO.SuccRLSet
upIur.Rx
times
Measuremen
t related to
SRNC in Iur
interface
VS.SHO.AttRLSetu
pIur.Tx
times
Measuremen
t related to
SRNC in Iur
interface
VS.IUR.RL.Setup.S
ucc.Rate
Measuremen
t related to
SRNC in Iur
interface
[VS.SHO.SuccRLSetupIur.Rx
]/
[VS.SHO.AttRLSetupIur.Tx
]*{100.00}
VS.SHO.SuccRLAd
dIur.Rx
times
Measuremen
t related to
SRNC in Iur
interface
858
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.SHO.AttRLAddI
ur.Tx
times
Measuremen
t related to
SRNC in Iur
interface
VS.IUR.RL.Additio
n.Succ.Rate
Measuremen
t related to
SRNC in Iur
interface
[VS.SHO.SuccRLAddIur.Rx]/
[VS.SHO.AttRLAddIur.Tx]*{
100.00}
VS.SHO.SuccRLRe
cfgIur.Rx
numb
er
Measuremen
t related to
SRNC in Iur
interface
VS.SHO.AttRLRecf
gIur.Tx
numb
er
Measuremen
t related to
SRNC in Iur
interface
VS.IUR.RL.RECFG
.Succe.Rate
Measuremen
t related to
SRNC in Iur
interface
[VS.SHO.SuccRLRecfgIur.Rx
]/
[VS.SHO.AttRLRecfgIur.Tx
]*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Issue 01 (2016-09-15)
859
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
PS.Inter.KByte.DL.
Throughput
none
Measuremen
t related to
throughput
per cell
([VS.PS.Int.DL.8.Thruput]/
({1024}*{8}))+
([VS.PS.Int.DL.64.Thruput]/
({1024}*{8}))+
([VS.PS.Int.DL.128.Thruput]/
({1024}*{8}))+
([VS.PS.Int.DL.384.Thruput]/
({1024}*{8}))
PS.Bkg.KByte.DL.T
hroughput
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.DL.8.Thruput]/
({1024}*{8}))+
([VS.PS.Bkg.DL.64.Thruput]/
({1024}*{8}))+
([VS.PS.Bkg.DL.
128.Thruput]/({1024}*{8}))+
([VS.PS.Bkg.DL.
384.Thruput]/({1024}*{8}))
VS.HSDPA.MeanCh
Throughput.TotalM
Bytes
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]/
({1024}*{1024})
VS.AMR.Call.Durat
ion
none
Measuremen
t of RB
Procedure
per cell
([VS.AMR.Ctrl.DL12.2]*{60
}*{60})/
[VS.RAB.SuccEstab.AMR]
VS.HSDPA.Kbps.M
eanChThroughput
none
HSDPA
Measuremen
t per cell
{8}*[VS.HSDPA.MeanChThr
oughput.TotalBytes]/
({GP}*{60}*{1024})
VS.PS.Throughput.
DL64.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.DL.64.Thruput]/
[VS.PS.Bkg.DL.64.Times])+
([VS.PS.Int.DL.64.Thruput]/
[VS.PS.Int.DL.64.Times])
Through
put
Issue 01 (2016-09-15)
860
PRS
Performance Report Reference
Subrep
ort
Name
Access
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.PS.Throughput.
DL128.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.DL.
128.Thruput]/[VS.PS.Bkg.DL.
128.Times])+([VS.PS.Int.DL.
128.Thruput]/[VS.PS.Int.DL.
128.Times])
VS.PS.Throughput.
DL384.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.DL.
384.Thruput]/[VS.PS.Bkg.DL.
384.Times])+([VS.PS.Int.DL.
384.Thruput]/[VS.PS.Int.DL.
384.Times])
VS.PS.Throughput.
UL64.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.UL.64.Thruput]/
[VS.PS.Bkg.UL.64.Times])+
([VS.PS.Int.UL.64.Thruput]/
[VS.PS.Int.UL.64.Times])
VS.PS.Throughput.
UL128.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.UL.
128.Thruput]/[VS.PS.Bkg.UL.
128.Times])+([VS.PS.Int.UL.
128.Thruput]/[VS.PS.Int.UL.
128.Times])
VS.PS.Throughput.
UL384.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.UL.
384.Thruput]/[VS.PS.Bkg.UL.
384.Times])+([VS.PS.Int.UL.
384.Thruput]/[VS.PS.Int.UL.
384.Times])
Call.Setup.Success.
Rate.AMR
RRC
connection
setup
measurement
per cell
(([RRC.SuccConnEstab.sum])
/
([VS.RRC.AttConnEstab.Cell]
))*([VS.RAB.SuccEstab.AMR
]/[VS.RAB.AttEstab.AMR])
Call.Setup.Success.
Rate.VP
RRC
connection
setup
measurement
per cell
(([RRC.SuccConnEstab.sum])
/
([VS.RRC.AttConnEstab.Cell]
))*([VS.RAB.SuccEstCS.Con
v.64]/
[VS.RAB.AttEstCS.Conv.64])
861
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Call.Setup.Success.
Rate.AMR_VP
RRC
connection
setup
measurement
per cell
(([RRC.SuccConnEstab.sum])
/
([VS.RRC.AttConnEstab.Cell]
))*(([VS.RAB.SuccEstab.AM
R]+
[VS.RAB.SuccEstCS.Conv.
64])/
([VS.RAB.AttEstab.AMR]+
[VS.RAB.AttEstCS.Conv.
64]))
Call.Setup.Success.
Rate.PS
RRC
connection
setup
measurement
per cell
(([RRC.SuccConnEstab.sum])
/
([VS.RRC.AttConnEstab.Cell]
))*(([VS.RAB.SuccEstabPS.C
onv]+
[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]))
RRC.Setup.Success.
Rate.Conv
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OgCo
nvCall]+
[RRC.SuccConnEstab.TmCon
vCall])/
([RRC.AttConnEstab.TmCon
vCall]+
[RRC.AttConnEstab.OrgConv
Call])
RRC.Setup.Success.
Conv
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.OgCon
vCall]+
[RRC.SuccConnEstab.TmCon
vCall]
RRC.Setup.Attempt.
Conv
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.OrgConv
Call]
862
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC.Setup.Success.
Rate.Str
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OrgStr
Call]+
[RRC.SuccConnEstab.TmStr
Call])/
([RRC.AttConnEstab.TmStrC
all]+
[RRC.AttConnEstab.OrgStrCa
ll])
RRC.Setup.Success.
Str
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.OrgStr
Call]+
[RRC.SuccConnEstab.TmStr
Call]
RRC.Setup.Attempt.
Str
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.OrgStrCa
ll]
RRC.Setup.Success.
Rate.BESer
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OrgItr
Call]+
[RRC.SuccConnEstab.OrgBkg
Call]+
[RRC.SuccConnEstab.TmItrC
all]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.TmHhP
rSig])/
([RRC.AttConnEstab.TmInter
Call]+
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.OrgInter
Call]+
[RRC.AttConnEstab.OrgBkgC
all]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.TmHhPr
Sig])
863
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC.Setup.Success.
BESer
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.OrgItrC
all]+
[RRC.SuccConnEstab.OrgBkg
Call]+
[RRC.SuccConnEstab.TmItrC
all]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.TmHhP
rSig]
RRC.Setup.Attempt.
BESer
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.TmInter
Call]+
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.OrgInter
Call]+
[RRC.AttConnEstab.OrgBkgC
all]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.TmHhPr
Sig]
864
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Other_ORO.R
ate.Cell
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.EmgC
all]+
[RRC.SuccConnEstab.IRATC
elRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
+
[RRC.SuccConnEstab.Unkow
n]+
[RRC.SuccConnEstab.OrgSub
Call]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig]+
[RRC.SuccConnEstab.CallRe
Est])/
([RRC.AttConnEstab.EmgCal
l]+
[RRC.AttConnEstab.IRATCel
Res]+
[RRC.AttConnEstab.IRATCC
O]+[RRC.AttConnEstab.Reg]
+[RRC.AttConnEstab.Detach]
+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgSubC
all]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t])
865
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC.SuccConnEsta
b.Other_ORO.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.EmgCa
ll]+
[RRC.SuccConnEstab.IRATC
elRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
+
[RRC.SuccConnEstab.Unkow
n]+
[RRC.SuccConnEstab.OrgSub
Call]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig]+
[RRC.SuccConnEstab.CallRe
Est]
RRC.AttConnEstab.
Other_ORO.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.IRATCel
Res]+
[RRC.AttConnEstab.IRATCC
O]+[RRC.AttConnEstab.Reg]
+[RRC.AttConnEstab.Detach]
+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgSubC
all]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*{1
00.00}
VS.RAB.SuccEstab.
AMR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
866
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.AttEstab.A
MR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstCS
.Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstCS.
Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.SuccEstab
CS.Rate.Cell.AMR_
VP
Measuremen
t of CS RAB
assignment
setup per cell
([VS.RAB.SuccEstCS.Conv.
64]+
[VS.RAB.SuccEstab.AMR])/
([VS.RAB.AttEstCS.Conv.
64]+
[VS.RAB.AttEstab.AMR])
VS.RAB.SuccEstab.
AMR_VP
none
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]+
[VS.RAB.SuccEstab.AMR]
VS.RAB.AttEstab.A
MR_VP
none
Measuremen
t of CS RAB
assignment
setup per cell
([VS.RAB.AttEstCS.Conv.
64]+
[VS.RAB.AttEstab.AMR])
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*{
100.00}
867
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstPS.
Cell
none
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.SuccEstabPS.Conv]
+[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+[VS.RAB.SuccEstabPS.Bkg]
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
VS.HSDPA.RAB.Su
ccEstab.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]
/
[VS.HSDPA.RAB.AttEstab
]*{100.00}
VS.HSDPA.RAB.Su
ccEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.At
tEstab
times
HSDPA
Measuremen
t per cell
RRC.Req.Call.Per.S
ervice
RRC
connection
setup
measurement
per cell
([VS.RRC.AttConnEstab.Cell]
)/
(([VS.RAB.SuccEstabCS.Con
v]+
[VS.RAB.SuccEstabCS.Str])+
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg]))
VS.RRC.AttConnEs
tab.Cell
times
RRC
connection
setup
measurement
per cell
VS.RAB.SuccEstab
CSPS.Cell
none
Measuremen
t of CS RAB
assignment
setup per cell
([VS.RAB.SuccEstabCS.Conv
]+
[VS.RAB.SuccEstabCS.Str])+
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])
868
PRS
Performance Report Reference
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CDR
Radio.Call.Drop.Rat
e.AMR
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF.AMR]/
[VS.RAB.SuccEstab.AMR]
VS.RAB.Loss.CS.R
F.AMR
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.SuccEstab.
AMR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
Radio.Call.Drop.Rat
e.VP
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.CS.RF][VS.RAB.Loss.CS.RF.AMR])
/[VS.RAB.SuccEstCS.Conv.
64]
VS.RAB.Loss.RF.V
P
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF][VS.RAB.Loss.CS.RF.AMR]
VS.RAB.SuccEstCS
.Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
Radio.Call.Drop.Rat
e.AMR_VP
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF]/
([VS.RAB.SuccEstCS.Conv.
64]+
[VS.RAB.SuccEstab.AMR])
VS.RAB.Loss.CS.R
F
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
869
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstab.
AMR_VP
none
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]+
[VS.RAB.SuccEstab.AMR]
VS.RAB.Loss.PS.R
F
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.SuccEstPS.
Cell
none
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.SuccEstabPS.Conv]
+[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+[VS.RAB.SuccEstabPS.Bkg]
Radio.Call.Drop.Rat
e.PS.HSDPA
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.RF]/
[VS.HSDPA.RAB.SuccEstab]
VS.HSDPA.RAB.Lo
ss.RF
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.Su
ccEstab
times
HSDPA
Measuremen
t per cell
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
VS.CS.AMR.Call.D
rop.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]
VS.CS.VP.Call.Drop
.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
870
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.CS.C
onv64K
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.CS.Call.Drop.Ra
te.Cell.AMR_VP
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Conv64K])
/([VS.RAB.SuccEstCS.Conv.
64]+
[VS.RAB.SuccEstab.AMR])
VS.CS.Call.Drop.Ce
ll.AMR_VP
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Conv64K]
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*{1
00.00}
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
871
PRS
Performance Report Reference
Subrep
ort
Name
HO
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.RAB.A
bnormRel.Rate
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.InAct
ivity]+
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.Succ
OutIntraFreq]+
[VS.HSDPA.HHO.H2D.Succ
OutInterFreq])*{100.00}
VS.HSDPA.RAB.A
bnormRel
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]
VS.SHO.Factor.RL
none
Soft
Handover
Measuremen
t per RNC
([VS.SHO.AS.1]+
[VS.SHO.AS.2Softer]*{2}+
[VS.SHO.AS.2Soft]*{2}+
[VS.SHO.AS.3Softer]*{3}+
[VS.SHO.AS.3Soft]*{3}+
[VS.SHO.AS.
3Soft2Softer]*{3}+
[VS.SHO.AS.4]*{4}+
[VS.SHO.AS.5]*{5}+
[VS.SHO.AS.6]*{6})/
([VS.SHO.AS.1]+
[VS.SHO.AS.2Softer]+
[VS.SHO.AS.2Soft]+
[VS.SHO.AS.3Softer]+
[VS.SHO.AS.3Soft]+
[VS.SHO.AS.3Soft2Softer]+
[VS.SHO.AS.4]+
[VS.SHO.AS.5]+
[VS.SHO.AS.6])-{1}
Radio.Link.Add.Suc
c.Rate
Soft
Handover
Measuremen
t per cell
[SHO.SuccRLAddUESide]/
[SHO.AttRLAddUESide]
872
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
SHO.SuccRLAddU
ESide
times
Soft
Handover
Measuremen
t per cell
SHO.AttRLAddUES
ide
times
Soft
Handover
Measuremen
t per cell
Radio.Link.Del.Succ
.Rate
Soft
Handover
Measuremen
t per cell
[SHO.SuccRLDelUESide]/
[SHO.AttRLDelUESide]
SHO.SuccRLDelUE
Side
times
Soft
Handover
Measuremen
t per cell
SHO.AttRLDelUESi
de
times
Soft
Handover
Measuremen
t per cell
VS.SHO.Success.Ce
ll.Rate
Soft
Handover
Measuremen
t per cell
([SHO.SuccRLAddUESide]+
[SHO.SuccRLDelUESide])/
([SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide])*{10
0.00}
VS.SHO.SuccUESid
e.Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.SuccRLAddUESide]+
[SHO.SuccRLDelUESide]
VS.SHO.AttUESide.
Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide]
HO.3G_2G.CS.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[VS.RAB.SuccEstab.AMR]
IRATHO.SuccOutC
S
times
InterRAT
Handover
Measuremen
t per cell
873
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstab.
AMR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*{100.00
}
IRATHO.AttOutCS
times
InterRAT
Handover
Measuremen
t per cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Issue 01 (2016-09-15)
874
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS Call
Drop
Cells
VS.CS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm]
VS.CS.RAB.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm]+
[VS.RAB.Loss.CS.Norm]
VS.RAB.RelReqCS.
OM
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqCS.
RABPreempt
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqCS.
UTRANgen
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.RLCRst
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.ULSync
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
875
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.CS.R
F.UuNoReply
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.Oth
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.A
al2Loss
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.Call.Drop.CS.Ot
her
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Abnorm][VS.RAB.RelReqCS.OM][VS.RAB.RelReqCS.UTRAN
gen][VS.RAB.RelReqCS.RABPre
empt][VS.RAB.Loss.CS.Aal2Loss]
VP Call
Drops
VS.CS.VP.Call.Drop
.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]
AMR
Call
Drops
VS.CS.AMR.Call.D
rop.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]
PS Drop
Cells
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
876
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.PS.RAB.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm]
VS.RAB.RelReqPS.
OM
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqPS.
RABPreempt
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.RLCRst
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.ULSync
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.UuNoReply
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.Oth
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
877
PRS
Performance Report Reference
Subrep
ort
Name
RRC Fail
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.PS.G
TPULoss
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.Call.Drop.PS.Ot
her
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.Abnorm][VS.RAB.RelReqPS.OM][VS.RAB.RelReqPS.RABPree
mpt][VS.RAB.Loss.PS.GTPULoss
]
VS.RRC.FailConnE
stab.Cell
times
RRC
connection
setup
measurement
per cell
[VS.RRC.AttConnEstab.Cell][RRC.SuccConnEstab.sum]
VS.RRC.AttConEst.
Cell
none
RRC
connection
setup
measurement
per cell
[VS.RRC.AttConEst.DCH]+
[VS.RRC.AttConEst.CCH]
VS.RRC.Rej.RL.Fai
l
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.TNL.F
ail
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Power.
Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.UL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
878
PRS
Performance Report Reference
Subrep
ort
Name
CS RAB
FAIL
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.Rej.DL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Code.C
ong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Other.
Cong
times
RRC
connection
reject
measurement
per cell
[RRC.FailConnEstab.Cong][VS.RRC.Rej.Power.Cong][VS.RRC.Rej.Code.Cong][VS.RRC.Rej.UL.CE.Cong][VS.RRC.Rej.DL.CE.Cong]
RRC.FailConnEstab.
NoReply
times
RRC
connection
reject
measurement
per cell
VS.RAB.FailEstabC
S.Cell
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.AttEstabCS.Conv]+
[VS.RAB.AttEstabCS.Str][VS.RAB.SuccEstabCS.Conv]
-[VS.RAB.SuccEstabCS.Str]
VS.RAB.AttEstabC
S.Cell
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.AttEstabCS.Conv]+
[VS.RAB.AttEstabCS.Str]
VS.RAB.FailEstabC
S.TNL
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCS.
Relo
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCS.
RIPFail
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
879
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstCs.
Power.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
ULCE.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
DLCE.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
Code.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstab.
CS.DLIUBBand.Co
ng
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstab.
CS.ULIUBBand.Co
ng
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstabC
S.Unsp.Other
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
[VS.RAB.FailEstCS.Unsp][VS.RAB.FailEstabCS.Cong]
VS.RAB.FailEstabC
S.RNL.Other
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
[VS.RAB.FailEstabCS.RNL][VS.RAB.FailEstCS.Relo][VS.RAB.FailEstCS.RIPFail][VS.RAB.FailEstabCS.Cong]
880
PRS
Performance Report Reference
Subrep
ort
Name
PS RAB
FAIL
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstabC
S.other.CELL
none
Measuremen
t of CS RAB
assignment
setup per cell
([VS.RAB.AttEstabCS.Conv]
+[VS.RAB.AttEstabCS.Str][VS.RAB.SuccEstabCS.Conv]
-[VS.RAB.SuccEstabCS.Str])[VS.RAB.FailEstabCS.RNL][VS.RAB.FailEstabCS.TNL]
VS.RAB.FailEstabP
S.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
VS.RAB.FailEstPS.
TNL
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
RIPFail
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
Par
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
Relo
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
881
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstPs.P
ower.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
Code.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
ULCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
DLCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstab.P
S.DLIUBBand.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstab.P
S.ULIUBBand.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstabP
S.Unsp.Other
none
Measuremen
t of PS RAB
assignment
failure per
cell
[VS.RAB.FailEstPS.Unsp][VS.RAB.FailEstPs.Power.Co
ng][VS.RAB.FailEstPs.Code.Con
g][VS.RAB.FailEstPs.ULCE.Co
ng][VS.RAB.FailEstPs.DLCE.Co
ng][VS.RAB.FailEstab.PS.DLIU
BBand.Cong][VS.RAB.FailEstab.PS.ULIU
BBand.Cong]
882
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FlEstPS.R
NL.Other
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
[VS.RAB.FailEstPS.RNL][VS.RAB.FailEstPS.RIPFail][VS.RAB.FailEstPS.Par][VS.RAB.FailEstPS.Relo][VS.RAB.FailEstPS.Unsp]
VS.RAB.FailEstabP
S.Other.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
(([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg]))
-[VS.RAB.FailEstPS.TNL][VS.RAB.FailEstPS.RNL]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Issue 01 (2016-09-15)
883
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SHO
FAIL
VS.SHO.Fail.Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide][SHO.SuccRLAddUESide][SHO.SuccRLDelUESide]
VS.SHO.AttUESide.
Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide]
SHO.FailRLAddUE
Side.CfgUnsup
times
Soft
Handover
Measuremen
t per cell
SHO.FailRLAddUE
Side.Isr
times
Soft
Handover
Measuremen
t per cell
SHO.FailRLAddUE
Side.InvCfg
times
Soft
Handover
Measuremen
t per cell
SHO.FailRLAddUE
Side.NoReply
times
Soft
Handover
Measuremen
t per cell
VS.SHO.Fail.Other.
Cell
none
Soft
Handover
Measuremen
t per cell
([SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide][SHO.SuccRLAddUESide][SHO.SuccRLDelUESide])[SHO.FailRLAddUESide.Cfg
Unsup][SHO.FailRLAddUESide.Isr][SHO.FailRLAddUESide.Inv
Cfg][SHO.FailRLAddUESide.No
Reply]
VS.HHO.InterFreq.F
ailOut
none
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.AttOut][VS.HHO.InterFreq.SuccOut]
InterFRe
quest
HHO
Fail
Issue 01 (2016-09-15)
884
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HHO.InterFreq.
AttOut
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CfgUnsupp
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.PyhChFail
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.FailUSR
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CellUpdt
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CfgInvalid
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.NoReply
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreq.F
ailOther
none
Hard
Handover
Measuremen
t per cell
([VS.HHO.InterFreq.AttOut][VS.HHO.InterFreq.SuccOut])
[VS.HHO.InterFreqOut.CfgU
nsupp][VS.HHO.InterFreqOut.PyhC
hFail][VS.HHO.InterFreqOut.FailU
SR][VS.HHO.InterFreqOut.CellU
pdt][VS.HHO.InterFreqOut.CfgIn
valid][VS.HHO.InterFreqOut.NoRe
ply]
885
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS
InterRAT
HHO
FAIL
VS.IRATHO.FailOu
tCS
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutCS][IRATHO.SuccOutCS]
IRATHO.AttOutCS
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutCS.
CfgUnsupp
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutCS.
PhyChFail
times
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.FailOu
tCS.Other
none
InterRAT
Handover
Measuremen
t per cell
([IRATHO.AttOutCS][IRATHO.SuccOutCS])[IRATHO.FailOutCS.CfgUns
upp][IRATHO.FailOutCS.PhyChF
ail]
VS.IRATHO.FailOu
tPSUTRAN.Cell
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutPSUTRAN][IRATHO.SuccOutPSUTRAN
]
IRATHO.AttOutPS
UTRAN
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutPS
UTRAN.CfgUnsupp
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutPS
UTRAN.PhyChFail
times
InterRAT
Handover
Measuremen
t per cell
PS
InterRAT
HHO
FAIL
Issue 01 (2016-09-15)
886
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.IRATHO.FailOu
tPSUTRAN.Other
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutPSUTRAN][IRATHO.SuccOutPSUTRAN
][IRATHO.FailOutPSUTRAN.
CfgUnsupp][IRATHO.FailOutPSUTRAN.
PhyChFail]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Hot
Traffic
Cell(AM
R Ctrl
DL12.2)
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
887
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Cell.Rate
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.sum]/
[VS.RRC.AttConnEstab.Cell
]*{100.00}
VS.HHO.InterFreq.
Out.Cell.Rate
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.SuccOut]/
[VS.HHO.InterFreq.AttOut]*{
100.00}
VS.MeanTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSInt.Tx
byte
Traffic
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSBkg.Tx
byte
Traffic
Measuremen
t per cell
VS.MaxRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MinRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MaxTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
888
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*{1
00.00}
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*{
100.00}
VS.SuccRBSetup.Ce
ll.Rate
Measuremen
t of RB
Procedure
per cell
[VS.SuccRBSetup]/
[VS.AttRBSetup]*{100.00}
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*{100.00
}
889
PRS
Performance Report Reference
Subrep
ort
Name
Hot
Traffic
Cell(RB
DLInterP
S 384)
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
VS.CS.VP.Call.Drop
.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*{1
00.00}
VS.PCH.Utilization.
Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesPC
H.Tx]/
([VS.CRNC.IUB.PCH.Bandw
idth]*{GP}*{60})*{100.00}
VS.FACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesFA
CH.Tx]/
([VS.CRNC.IUB.FACH.Band
width]*{GP}*{60})*{100.00}
VS.RACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesRA
CH.Rx]/
([VS.CRNC.IUB.RACH.Band
width]*{GP}*{60})*{100.00}
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RRC.SuccConn
Estab.Cell.Rate
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.sum]/
[VS.RRC.AttConnEstab.Cell
]*{100.00}
VS.HHO.InterFreq.
Out.Cell.Rate
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.SuccOut]/
[VS.HHO.InterFreq.AttOut]*{
100.00}
890
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.MeanTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSInt.Tx
byte
Traffic
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSBkg.Tx
byte
Traffic
Measuremen
t per cell
VS.MaxRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MinRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MaxTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
891
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*{1
00.00}
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*{
100.00}
VS.SuccRBSetup.Ce
ll.Rate
Measuremen
t of RB
Procedure
per cell
[VS.SuccRBSetup]/
[VS.AttRBSetup]*{100.00}
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*{100.00
}
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
VS.CS.VP.Call.Drop
.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
892
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*{1
00.00}
VS.PCH.Utilization.
Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesPC
H.Tx]/
([VS.CRNC.IUB.PCH.Bandw
idth]*{GP}*{60})*{100.00}
VS.FACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesFA
CH.Tx]/
([VS.CRNC.IUB.FACH.Band
width]*{GP}*{60})*{100.00}
VS.RACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesRA
CH.Rx]/
([VS.CRNC.IUB.RACH.Band
width]*{GP}*{60})*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Issue 01 (2016-09-15)
893
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
Traffic
VS.HSDPA.MeanCh
Throughput.TotalM
Bytes
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]/
({1024}*{1024})
VS.HSDPA.UE.Mea
n.Cell
numb
er
HSDPA
Measuremen
t per cell
VS.HSDPA.MeanCh
Throughput.TotalM
Bps
none
HSDPA
Measuremen
t per cell
([VS.HSDPA.MeanChThroug
hput.TotalBytes]*{8.0}/
({1024.0}*{1024.0}))/
({GP}*{60})
VS.HSDPA.RAB.Su
ccEstab.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]
/
[VS.HSDPA.RAB.AttEstab
]*{100.00}
VS.HSDPA.RAB.Su
ccEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.At
tEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ServCell
Chg.Succ.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.Su
ccOut]/
[VS.HSDPA.SHO.CellChg.At
tOut]*{100.00}
VS.HSDPA.SHO.Ce
llChg.SuccOut
times
HSDPA
Measuremen
t per cell
VS.HSDPA.SHO.Ce
llChg.AttOut
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.In
traFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInt
raFreq]/
[VS.HSDPA.HHO.AttOutIntr
aFreq]*{100.00}
VS.HSDPA.HHO.Su
ccOutIntraFreq
times
HSDPA
Measuremen
t per cell
HSDPA
Access
HSDPA
HO
Issue 01 (2016-09-15)
894
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.HHO.At
tOutIntraFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.In
terFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInt
erFreq]/
[VS.HSDPA.HHO.AttOutInte
rFreq]*{100.00}
VS.HSDPA.HHO.Su
ccOutInterFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.At
tOutInterFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.HS
DSCHtoDCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH]/
[VS.HSDPA.ChR.HSDSCHto
DCH.Att]*{100.00}
VS.HSDPA.ChR.HS
DSCHtoDCH
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.HS
DSCHtoDCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.DC
HtoHSDSCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH]/
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att]*{100.00}
VS.HSDPA.ChR.DC
HtoHSDSCH
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.DC
HtoHSDSCH.Att
times
HSDPA
Measuremen
t per cell
895
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
CDR
VS.HSDPA.RAB.A
bnormRel.Rate
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.InAct
ivity]+
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.Succ
OutIntraFreq]+
[VS.HSDPA.HHO.H2D.Succ
OutInterFreq])*{100.00}
VS.HSDPA.RAB.A
bnormRel
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]
VS.HSDPA.RAB.Re
l
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.InActi
vity]+
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.Succ
OutIntraFreq]+
[VS.HSDPA.HHO.H2D.Succ
OutInterFreq]
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
896
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
RAB
Fail
VS.HSDPA.RAB.Fa
ilEstab
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.AttEstab][VS.HSDPA.RAB.SuccEstab]
VS.HSDPA.RAB.At
tEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.A
bnormRel
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]
VS.HSDPA.RAB.Re
l
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.InActi
vity]+
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.Succ
OutIntraFreq]+
[VS.HSDPA.HHO.H2D.Succ
OutInterFreq]
VS.HSDPA.MeanCh
Throughput.NEW
none
HSDPA
Measuremen
t per cell
({8}*[VS.HSDPA.MeanChTh
roughput.TotalBytes]/
([VS.HSDPA.MeanChThroug
hput.Times]))
HSDPA
RAB
Abnorm
Rel
Issue 01 (2016-09-15)
897
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.MeanCh
Throughput.TotalByt
es
byte
HSDPA
Measuremen
t per cell
VS.HSDPA.UE.Mea
n.Cell
numb
er
HSDPA
Measuremen
t per cell
VS.HSDPA.MACD.
Mean.Cell
numb
er
HSDPA
Measuremen
t per cell
HSDPA
HHO
IntraFRe
quest
Fail
VS.HSDPA.ServCell
Chg.HHO.IntraFreq.
NoChR.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.AttOutIntr
aFreq][VS.HSDPA.HHO.SuccOutInt
raFreq]
VS.HSDPA.HHO.At
tOutIntraFreq
times
HSDPA
Measuremen
t per cell
HSDPA
HHO
InterFRe
quest
Fail
VS.HSDPA.ServCell
Chg.HHO.InterFreq.
NoChR.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.AttOutInte
rFreq][VS.HSDPA.HHO.SuccOutInt
erFreq]
VS.HSDPA.HHO.At
tOutInterFreq
times
HSDPA
Measuremen
t per cell
HSDPA
HSDSC
HtoDCH
Fail
VS.HSDPA.ChR.HS
DSCHtoDCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH.Att][VS.HSDPA.ChR.HSDSCHto
DCH]
VS.HSDPA.ChR.HS
DSCHtoDCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.DC
HtoHSDSCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att][VS.HSDPA.ChR.DCHtoHSD
SCH]
VS.HSDPA.ChR.DC
HtoHSDSCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ServCell
Chg.SHO.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.At
tOut][VS.HSDPA.SHO.CellChg.Su
ccOut]
HSDPA
DCHtoH
SDSCH
Fail
HSDPA
ServCell
Chg Fail
Issue 01 (2016-09-15)
898
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.SHO.Ce
llChg.AttOut
times
HSDPA
Measuremen
t per cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA
Access
VS.HSUPA.RAB.Su
ccEstab.Rate
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.SuccEstab]
/
[VS.HSUPA.RAB.AttEstab
]*{100.00}
VS.HSUPA.RAB.Su
ccEstab
numb
er
HSUPA
Measuremen
t per cell
VS.HSUPA.RAB.At
tEstab
numb
er
HSUPA
Measuremen
t per cell
899
PRS
Performance Report Reference
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA
HO
VS.HSUPA.EDCH.
SHO.Succ.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.EDCH.SHO.Suc
c]/
[VS.HSUPA.EDCH.SHO.Att
]*{100.00}
VS.HSUPA.EDCH.
SHO.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.EDCH.
SHO.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.SHO.Se
rvCellChg.Succ.Rati
o
HSUPA
Measuremen
t per cell
[VS.HSUPA.SHO.ServCellCh
g.Succ]/
[VS.HSUPA.SHO.ServCellCh
g.Att]*{100.00}
VS.HSUPA.SHO.Se
rvCellChg.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.SHO.Se
rvCellChg.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.HHO.InterFreq.
NoChR.Succ]/
[VS.HSUPA.HHO.InterFreq.
NoChR.Att]*{100.00}
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.HHO.In
terFreq.NoChR.Att
times
HSUPA
Measuremen
t per cell
900
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA
CDR
VS.HSUPA.RAB.A
bnormRel.Rate
HSUPA
Measuremen
t per cell
([VS.HSUPA.RAB.Loss.Abno
rm])/
([VS.HSUPA.RAB.Loss.Abno
rm]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ])*{100.00}
VS.HSUPA.RAB.A
bnormRel
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnor
m]
VS.HSUPA.RAB.Re
lease
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnor
m]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
901
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA
RAB
FailEstab
VS.HSUPA.RAB.Fa
ilEstab
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.AttEstab][VS.HSUPA.RAB.SuccEstab]
VS.HSUPA.RAB.At
tEstab
numb
er
HSUPA
Measuremen
t per cell
HSUPA
RAB
Abnorm
Release
VS.HSUPA.RAB.A
bnormRel
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnor
m]
VS.HSUPA.RAB.Re
lease
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnor
m]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ]
HSUPA
EDCH
SHO Fail
VS.HSUPA.EDCH.
SHO.Fail
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.EDCH.SHO.Att]
[VS.HSUPA.EDCH.SHO.Suc
c]
VS.HSUPA.EDCH.
SHO.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.SHO.Se
rvCellChg.Fail
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.SHO.ServCellCh
g.Att][VS.HSUPA.SHO.ServCellCh
g.Succ]
HSUPA
SHO
ServCell
Chg Fail
Issue 01 (2016-09-15)
902
PRS
Performance Report Reference
Subrep
ort
Name
HSUPA
HHO
InterFRe
quest
NoChR
Fail
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSUPA.SHO.Se
rvCellChg.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.HHO.In
terFreq.NoChR.Fail
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.HHO.InterFreq.
NoChR.Att][VS.HSUPA.HHO.InterFreq.
NoChR.Succ]
VS.HSUPA.HHO.In
terFreq.NoChR.Att
times
HSUPA
Measuremen
t per cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
VS.AMR.RB.DL.
12.2
numb
er
Measuremen
t related to
AMR service
903
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RB.DLConvCS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.CSLoad.Erlang.
Equiv.RNC
none
Traffic
Measuremen
t per RNC
VS.R99PSLoad.ULT
hruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.R99PSLoad.DLT
hruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.HSUPAPSLoad.
ULThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.HSDPAPSLoad.
DLThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
904
PRS
Performance Report Reference
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
VS.RRC.SuccConn
Estab.Service.Cell.R
ate
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OgCo
nvCall]+
[RRC.SuccConnEstab.OrgStr
Call]+
[RRC.SuccConnEstab.OrgItrC
all]+
[RRC.SuccConnEstab.OrgBkg
Call]+
[RRC.SuccConnEstab.OrgSub
Call]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrC
all]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCa
ll]+
[RRC.SuccConnEstab.Unkow
n]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallRe
Est]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig])/
([RRC.AttConnEstab.OrgCon
vCall]+
[RRC.AttConnEstab.OrgStrCa
ll]+
[RRC.AttConnEstab.OrgInter
Call]+
[RRC.AttConnEstab.OrgBkgC
all]+
[RRC.AttConnEstab.OgSubC
all]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInter
Call]+
905
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100.00}
VS.RRC.SuccConn
Estab.Service.Cell
Issue 01 (2016-09-15)
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.OgCon
vCall]+
[RRC.SuccConnEstab.OrgStr
Call]+
[RRC.SuccConnEstab.OrgItrC
all]+
[RRC.SuccConnEstab.OrgBkg
Call]+
[RRC.SuccConnEstab.OrgSub
Call]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrC
all]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCa
ll]+
[RRC.SuccConnEstab.Unkow
n]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallRe
Est]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig]
906
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.AttConnEs
tab.Service.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.OrgConv
Call]+
[RRC.AttConnEstab.OrgStrCa
ll]+
[RRC.AttConnEstab.OrgInter
Call]+
[RRC.AttConnEstab.OrgBkgC
all]+
[RRC.AttConnEstab.OgSubC
all]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInter
Call]+
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig]
VS.RRC.SuccConn
Estab.Other.Cell.Rat
e
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.IRAT
CelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
)/
([RRC.AttConnEstab.IRATCe
lRes]+
[RRC.AttConnEstab.IRATCC
O]+[RRC.AttConnEstab.Reg]
+
[RRC.AttConnEstab.Detach]
)*{100.00}
907
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Other.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.IRATC
elRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
VS.RRC.AttConnEs
tab.Other.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.IRATCel
Res]+
[RRC.AttConnEstab.IRATCC
O]+[RRC.AttConnEstab.Reg]
+[RRC.AttConnEstab.Detach]
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*{1
00.00}
VS.RAB.SuccEstab.
AMR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstab.A
MR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstCS
.Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstCS.
Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
908
PRS
Performance Report Reference
Subrep
ort
Name
HO
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*{
100.00}
VS.RAB.SuccEstPS.
Cell
none
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.SuccEstabPS.Conv]
+[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+[VS.RAB.SuccEstabPS.Bkg]
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
VS.SHO.Factor.RL
none
Soft
Handover
Measuremen
t per RNC
([VS.SHO.AS.1]+
[VS.SHO.AS.2Softer]*{2}+
[VS.SHO.AS.2Soft]*{2}+
[VS.SHO.AS.3Softer]*{3}+
[VS.SHO.AS.3Soft]*{3}+
[VS.SHO.AS.
3Soft2Softer]*{3}+
[VS.SHO.AS.4]*{4}+
[VS.SHO.AS.5]*{5}+
[VS.SHO.AS.6]*{6})/
([VS.SHO.AS.1]+
[VS.SHO.AS.2Softer]+
[VS.SHO.AS.2Soft]+
[VS.SHO.AS.3Softer]+
[VS.SHO.AS.3Soft]+
[VS.SHO.AS.3Soft2Softer]+
[VS.SHO.AS.4]+
[VS.SHO.AS.5]+
[VS.SHO.AS.6])-{1}
VS.SHO.Succ.Rate
Soft
Handover
Measuremen
t per RNC
[VS.SHO.Succ]/
[VS.SHO.Att.RNC]*{100.00}
909
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.SHO.Succ
times
Soft
Handover
Measuremen
t per RNC
VS.SHO.Att.RNC
times
Soft
Handover
Measuremen
t per RNC
VS.InterFreq.HHO.S
ucc.RNC.Rate
Hard
Handover
Measuremen
t per RNC
[VS.HHO.InterFreq.Succ.RN
C]/
[VS.HHO.InterFreq.Att.RNC
]*{100.00}
VS.HHO.InterFreq.S
ucc.RNC
times
Hard
Handover
Measuremen
t per RNC
VS.HHO.InterFreq.
Att.RNC
times
Hard
Handover
Measuremen
t per RNC
VS.IRATHO.SuccC
SOut.RNC.Rate
Measuremen
t related to
CS IRA
handover per
RNC
[VS.IRATHO.SuccCSOut.RN
C]/
[VS.IRATHO.AttCSOut.RNC
]*{100.00}
VS.IRATHO.SuccC
SOut.RNC
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.IRATHO.AttCS
Out.RNC
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.IRATHO.SuccP
SOutUTRAN.RNC.
Rate
Measuremen
t related to
PS IRA
handover per
RNC
[VS.IRATHO.SuccPSOutUTR
AN.RNC]/
[VS.IRATHO.AttPSOutUTR
AN.RNC]*{100.00}
910
PRS
Performance Report Reference
Subrep
ort
Name
CDR
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.IRATHO.SuccP
SOutUTRAN.RNC
times
Measuremen
t related to
PS IRA
handover per
RNC
VS.IRATHO.AttPS
OutUTRAN.RNC
times
Measuremen
t related to
PS IRA
handover per
RNC
VS.Abnorm.Rel.CS.
AMR.IurLink
times
Measuremen
t related to
SRNC in Iur
interface
VS.Rel.CS.AMR.Iur
Link
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Norm.Rel.CS.AMR.IurLi
nk]+
[VS.Abnorm.Rel.CS.AMR.Iur
Link]
VS.RAB.Loss.CS.A
MR
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.CS.AMR.Releas
e
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R]
VS.Abnorm.Rel.CS.
Conv.RB.64.IurLink
times
Measuremen
t related to
SRNC in Iur
interface
VS.Rel.CS.VP.IurLi
nk
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Norm.Rel.CS.Conv.RB.
64.IurLink]+
[VS.Abnorm.Rel.CS.Conv.RB
.64.IurLink]
911
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.CS.C
onv64K
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.CS.VP.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64]
VS.Abnorm.Rel.PS.I
urLink
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Abnorm.Rel.PS.BE.RB.
0.32.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
32.64.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
64.144.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
144.384.IurLink]+
[VS.Abnorm.Rel.PS.CCH.Iur
Link]
VS.Rel.PS.IurLink
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Norm.Rel.PS.BE.RB.
0.32.IurLink]+
[VS.Norm.Rel.PS.BE.RB.
32.64.IurLink]+
[VS.Norm.Rel.PS.BE.RB.
64.144.IurLink]+
[VS.Norm.Rel.PS.BE.RB.
144.384.IurLink]+
[VS.Norm.Rel.PS.CCH.IurLin
k]+
[VS.Abnorm.Rel.PS.BE.RB.
0.32.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
32.64.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
64.144.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
144.384.IurLink]+
[VS.Abnorm.Rel.PS.CCH.Iur
Link]
912
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
VS.PS.RAB.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Issue 01 (2016-09-15)
913
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC
Cong
Cell
TopN
RRC.FailConnEstab.
Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Power.
Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.UL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.DL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Code.C
ong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.TNL.F
ail
times
RRC
connection
reject
measurement
per cell
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
914
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RB.ULInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.ULInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.ULInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.ULInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.MAC.SRNCIub
BytesPSInt.Tx
byte
Traffic
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSBkg.Tx
byte
Traffic
Measuremen
t per cell
915
PRS
Performance Report Reference
Subrep
ort
Name
RAB
Cong
Cell
TopN
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.LC.ULCreditUse
d.CELL
none
Measuremen
t related to
Algorithm
per cell
VS.LC.DLCreditUse
d.CELL
none
Measuremen
t related to
Algorithm
per cell
VS.RAB.FailEstabP
S.Cong
none
Measuremen
t of PS RAB
assignment
failure per
cell
[VS.RAB.Block.PS.Bkg.
0.32]+
[VS.RAB.Block.PS.Bkg.
144.384]+
[VS.RAB.Block.PS.Bkg.
32.64]+
[VS.RAB.Block.PS.Bkg.
64.144]+
[VS.RAB.Block.PS.Conv.
0.32]+[VS.RAB.Block.PS.Int.
0.32]+[VS.RAB.Block.PS.Int.
144.384]+
[VS.RAB.Block.PS.Int.
32.64]+
[VS.RAB.Block.PS.Int.
64.144]+
[VS.RAB.Block.PS.Str.0.32]+
[VS.RAB.Block.PS.Str.
144.384]+
[VS.RAB.Block.PS.Str.
32.64]+
[VS.RAB.Block.PS.Str.
64.144]+
[VS.RAB.BlockPS.BkgMor38
4]+
[VS.RAB.BlockPS.ConvMor3
2]+
[VS.RAB.BlockPS.StrMor384
]+
[VS.RAB.BlockPS.IntMor384
]
VS.RAB.FailEstPs.P
ower.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
916
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstPs.
Code.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
ULCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
DLCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
TNL
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.ULInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.ULInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.ULInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
917
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RB.ULInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.MAC.SRNCIub
BytesPSInt.Tx
byte
Traffic
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSBkg.Tx
byte
Traffic
Measuremen
t per cell
VS.LC.ULCreditUse
d.CELL
none
Measuremen
t related to
Algorithm
per cell
VS.LC.DLCreditUse
d.CELL
none
Measuremen
t related to
Algorithm
per cell
RRC.FailConnEstab.
Cong
times
RRC
connection
reject
measurement
per cell
918
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
AMR
TopN
VS.AMR.RB.DL.
12.2
numb
er
Measuremen
t related to
AMR service
VS.RB.DLConvCS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.ULInterPS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.ULInterPS.
128.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.ULInterPS.
144.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
919
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RB.ULInterPS.
384.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLInterPS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLInterPS.
128.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLInterPS.
144.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLInterPS.
384.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
UCell
Issue 01 (2016-09-15)
920
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VIP Cell
VS.Call.Drop.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm])+
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])
VS.RRC.SuccConn
Estab.Cell.Rate
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.sum]/
[VS.RRC.AttConnEstab.Cell
]*{100.00}
VS.HHO.InterFreq.
Out.Cell.Rate
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.SuccOut]/
[VS.HHO.InterFreq.AttOut]*{
100.00}
VS.MeanTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSInt.Tx
byte
Traffic
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSBkg.Tx
byte
Traffic
Measuremen
t per cell
VS.MaxRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MinRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MaxTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
921
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*{1
00.00}
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*{
100.00}
VS.SuccRBSetup.Ce
ll.Rate
Measuremen
t of RB
Procedure
per cell
[VS.SuccRBSetup]/
[VS.AttRBSetup]*{100.00}
922
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*{100.00
}
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
VS.CS.VP.Call.Drop
.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*{1
00.00}
VS.PCH.Utilization.
Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesPC
H.Tx]/
([VS.CRNC.IUB.PCH.Bandw
idth]*{GP}*{60})*{100.00}
VS.FACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesFA
CH.Tx]/
([VS.CRNC.IUB.FACH.Band
width]*{GP}*{60})*{100.00}
VS.RACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesRA
CH.Rx]/
([VS.CRNC.IUB.RACH.Band
width]*{GP}*{60})*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
923
PRS
Performance Report Reference
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CDR
Report
VS.RAB.SucEstCS
Conv0.32.RNC
numb
er
Measuremen
t of CS RAB
assignment
setup per
RNC
VS.RAB.Loss.CS.A
MR.RNC
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
VS.AMR.Call.Drop.
RNC.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
[VS.RAB.Loss.CS.AMR.RNC
]/
[VS.RAB.SucEstCSConv0.32.
RNC]*{100.00}
VS.RAB.SucEstCS
Conv32.64.RNC
numb
er
Measuremen
t of CS RAB
assignment
setup per
RNC
924
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.CS.C
onv64K.RNC
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
VS.VP.Call.Drop.R
NC.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
[VS.RAB.Loss.CS.Conv64K.
RNC]/
[VS.RAB.SucEstCSConv32.6
4.RNC]*{100.00}
VS.RAB.SuccEstPS.
RNC
none
Measuremen
t of PS RAB
assignment
setup per
RNC
([RAB.SuccEstabPSNoQueuing.Bgrd]+
[RAB.SuccEstabPSQueuing.Bgrd])+
([RAB.SuccEstabPSNoQueuing.Conv]+
[RAB.SuccEstabPSQueuing.Conv])+
([RAB.SuccEstabPSNoQueuing.Intact]+
[RAB.SuccEstabPSQueuing.Intact])+
([RAB.SuccEstabPSQueuing.Strm]+
[RAB.SuccEstabPSNoQueuing.Strm])
VS.PS.Call.Drop.R
NC
none
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
[VS.RAB.Loss.PS.RF.RNC]+
[VS.RAB.Loss.PS.Abnorm.R
NC]
925
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.PS.Call.Drop.R
NC.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
(([VS.RAB.Loss.PS.RF.RNC]
+
[VS.RAB.Loss.PS.Abnorm.R
NC]))/
(([RAB.SuccEstabPSNoQueuing.Bgrd]+
[RAB.SuccEstabPSQueuing.Bgrd])+
([RAB.SuccEstabPSNoQueuing.Conv]+
[RAB.SuccEstabPSQueuing.Conv])+
([RAB.SuccEstabPSNoQueuing.Intact]+
[RAB.SuccEstabPSQueuing.Intact])+
([RAB.SuccEstabPSQueuing.Strm]+
[RAB.SuccEstabPSNoQueuing.Strm]))*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
21.6.2 HO Report
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Issue 01 (2016-09-15)
926
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HO
Report
VS.SHO.Att.RNC
times
Soft
Handover
Measuremen
t per RNC
VS.SHO.Succ
times
Soft
Handover
Measuremen
t per RNC
VS.SHO.Succ.Rate
Soft
Handover
Measuremen
t per RNC
[VS.SHO.Succ]/
[VS.SHO.Att.RNC]*{100.00}
VS.HHO.InterFreq.
Att.RNC
times
Hard
Handover
Measuremen
t per RNC
VS.HHO.InterFreq.S
ucc.RNC
times
Hard
Handover
Measuremen
t per RNC
VS.InterFreq.HHO.S
ucc.RNC.Rate
Hard
Handover
Measuremen
t per RNC
[VS.HHO.InterFreq.Succ.RN
C]/
[VS.HHO.InterFreq.Att.RNC
]*{100.00}
VS.IRATHO.AttCS
Out.RNC
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.IRATHO.SuccC
SOut.RNC
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.IRATHO.SuccC
SOut.RNC.Rate
Measuremen
t related to
CS IRA
handover per
RNC
[VS.IRATHO.SuccCSOut.RN
C]/
[VS.IRATHO.AttCSOut.RNC
]*{100.00}
927
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.SRELOC.AttPre
p.IRHOCS
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.SRELOC.SuccPr
ep.IRHOCS
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.SRELOC.SuccPr
ep.IRHOCS.Rate
Measuremen
t related to
CS IRA
handover per
RNC
[VS.SRELOC.SuccPrep.IRH
OCS]/
[VS.SRELOC.AttPrep.IRHO
CS]*{100.00}
VS.IRATHO.AttPS
OutUTRAN.RNC
times
Measuremen
t related to
PS IRA
handover per
RNC
VS.IRATHO.SuccP
SOutUTRAN.RNC
times
Measuremen
t related to
PS IRA
handover per
RNC
VS.IRATHO.SuccP
SOutUTRAN.RNC.
Rate
Measuremen
t related to
PS IRA
handover per
RNC
[VS.IRATHO.SuccPSOutUTR
AN.RNC]/
[VS.IRATHO.AttPSOutUTR
AN.RNC]*{100.00}
VS.IRATHO.EvalPS
OutUTRAN.RNC
times
Measuremen
t related to
PS IRA
handover per
RNC
VS.IRATHO.SuccPr
epPSOutUTRAN.Ra
te
Measuremen
t related to
PS IRA
handover per
RNC
[VS.IRATHO.AttPSOutUTR
AN.RNC]/
[VS.IRATHO.EvalPSOutUTR
AN.RNC]*{100.00}
928
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
Traffic
VS.HSDPA.MeanCh
Throughput.TotalM
Bytes
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]/
({1024}*{1024})
VS.HSDPA.UE.Mea
n.Cell
numb
er
HSDPA
Measuremen
t per cell
VS.HSDPA.MeanCh
Throughput.TotalM
Bps
none
HSDPA
Measuremen
t per cell
([VS.HSDPA.MeanChThroug
hput.TotalBytes]*{8.0}/
({1024.0}*{1024.0}))/
({GP}*{60})
VS.HSDPA.RAB.Su
ccEstab.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]
/
[VS.HSDPA.RAB.AttEstab
]*{100.00}
VS.HSDPA.RAB.Su
ccEstab
times
HSDPA
Measuremen
t per cell
HSDPA
Access
Issue 01 (2016-09-15)
929
PRS
Performance Report Reference
Subrep
ort
Name
HSDPA
HO
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.RAB.At
tEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ServCell
Chg.Succ.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.Su
ccOut]/
[VS.HSDPA.SHO.CellChg.At
tOut]*{100.00}
VS.HSDPA.SHO.Ce
llChg.SuccOut
times
HSDPA
Measuremen
t per cell
VS.HSDPA.SHO.Ce
llChg.AttOut
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.In
traFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInt
raFreq]/
[VS.HSDPA.HHO.AttOutIntr
aFreq]*{100.00}
VS.HSDPA.HHO.Su
ccOutIntraFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.At
tOutIntraFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.In
terFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInt
erFreq]/
[VS.HSDPA.HHO.AttOutInte
rFreq]*{100.00}
VS.HSDPA.HHO.Su
ccOutInterFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.At
tOutInterFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.HS
DSCHtoDCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH]/
[VS.HSDPA.ChR.HSDSCHto
DCH.Att]*{100.00}
VS.HSDPA.ChR.HS
DSCHtoDCH
times
HSDPA
Measuremen
t per cell
930
PRS
Performance Report Reference
Subrep
ort
Name
HSDPA
CDR
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.ChR.HS
DSCHtoDCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.DC
HtoHSDSCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH]/
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att]*{100.00}
VS.HSDPA.ChR.DC
HtoHSDSCH
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.DC
HtoHSDSCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.A
bnormRel.Rate
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.InAct
ivity]+
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.Succ
OutIntraFreq]+
[VS.HSDPA.HHO.H2D.Succ
OutInterFreq])*{100.00}
VS.HSDPA.RAB.A
bnormRel
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]
931
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.RAB.Re
l
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.InActi
vity]+
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.Succ
OutIntraFreq]+
[VS.HSDPA.HHO.H2D.Succ
OutInterFreq]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Issue 01 (2016-09-15)
932
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA
Access
VS.HSUPA.RAB.Su
ccEstab.Rate
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.SuccEstab]
/
[VS.HSUPA.RAB.AttEstab
]*{100.00}
VS.HSUPA.RAB.Su
ccEstab
numb
er
HSUPA
Measuremen
t per cell
VS.HSUPA.RAB.At
tEstab
numb
er
HSUPA
Measuremen
t per cell
VS.HSUPA.EDCH.
SHO.Succ.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.EDCH.SHO.Suc
c]/
[VS.HSUPA.EDCH.SHO.Att
]*{100.00}
VS.HSUPA.EDCH.
SHO.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.EDCH.
SHO.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.SHO.Se
rvCellChg.Succ.Rati
o
HSUPA
Measuremen
t per cell
[VS.HSUPA.SHO.ServCellCh
g.Succ]/
[VS.HSUPA.SHO.ServCellCh
g.Att]*{100.00}
VS.HSUPA.SHO.Se
rvCellChg.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.SHO.Se
rvCellChg.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.HHO.InterFreq.
NoChR.Succ]/
[VS.HSUPA.HHO.InterFreq.
NoChR.Att]*{100.00}
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
times
HSUPA
Measuremen
t per cell
HSUPA
HO
Issue 01 (2016-09-15)
933
PRS
Performance Report Reference
Subrep
ort
Name
HSUPA
CDR
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSUPA.HHO.In
terFreq.NoChR.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.RAB.A
bnormRel.Rate
HSUPA
Measuremen
t per cell
([VS.HSUPA.RAB.Loss.Abno
rm])/
([VS.HSUPA.RAB.Loss.Abno
rm]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ])*{100.00}
VS.HSUPA.RAB.A
bnormRel
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnor
m]
VS.HSUPA.RAB.Re
lease
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnor
m]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ]
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
934
PRS
Performance Report Reference
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PAGE
Report
VS.RANAP.Paging.
Att.IdleUE
times
Measuremen
t related to
Paging per
RNC
VS.RANAP.Paging.
Succ.IdleUE
times
Measuremen
t related to
Paging per
RNC
VS.RANAP.Paging.
Succ.IdleUE.Rate
Measuremen
t related to
Paging per
RNC
[VS.RANAP.Paging.Succ.Idle
UE]/
[VS.RANAP.Paging.Att.IdleU
E]*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
935
PRS
Performance Report Reference
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RAB
Report
VS.RAB.AttEstCSC
onv0.32.RNC
numb
er
Measuremen
t of CS RAB
assignment
setup per
RNC
VS.RAB.SucEstCS
Conv0.32.RNC
numb
er
Measuremen
t of CS RAB
assignment
setup per
RNC
RAB.SuccEstabCSC
onv0.32.RNC.Rate
Measuremen
t of CS RAB
assignment
setup per
RNC
[VS.RAB.SucEstCSConv0.32.
RNC]/
[VS.RAB.AttEstCSConv0.32.
RNC]*{100.00}
VS.RAB.AttEstCSC
onv32.64.RNC
numb
er
Measuremen
t of CS RAB
assignment
setup per
RNC
VS.RAB.SucEstCS
Conv32.64.RNC
numb
er
Measuremen
t of CS RAB
assignment
setup per
RNC
RAB.SuccEstabCSC
onv32.64.RNC.Rate
Measuremen
t of CS RAB
assignment
setup per
RNC
[VS.RAB.SucEstCSConv32.6
4.RNC]/
[VS.RAB.AttEstCSConv32.64
.RNC]*{100.00}
RAB.AttEstabPS.Int
act
numb
er
Measuremen
t of PS RAB
assignment
setup per
RNC
936
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SucEstPSI
nt.RNC
none
Measuremen
t of PS RAB
assignment
setup per
RNC
[VS.RAB.SucEstPSInt0.32.R
NC]+
[VS.RAB.SucEstPSInt32.64.R
NC]+
[VS.RAB.SucEstPSInt64.144.
RNC]+
[VS.RAB.SucEstPSInt144384
.RNC]+
[VS.RAB.SucEstPSIntMor38
4.RNC]
VS.RAB.SucEstPSI
nt.RNC.Rate
Measuremen
t of PS RAB
assignment
setup per
RNC
([VS.RAB.SucEstPSInt0.32.R
NC]+
[VS.RAB.SucEstPSInt32.64.R
NC]+
[VS.RAB.SucEstPSInt64.144.
RNC]+
[VS.RAB.SucEstPSInt144384
.RNC]+
[VS.RAB.SucEstPSIntMor38
4.RNC])/
[RAB.AttEstabPS.Intact]*{10
0.00}
RAB.AttEstabPS.Bg
rd
numb
er
Measuremen
t of PS RAB
assignment
setup per
RNC
VS.RAB.SucEstPSB
kg.RNC
none
Measuremen
t of PS RAB
assignment
setup per
RNC
[VS.RAB.SucEstPSBkg0.32.
RNC]+
[VS.RAB.SucEstPSBkg32.64.
RNC]+
[VS.RAB.SucEstPSBkg64.14
4.RNC]+
[VS.RAB.SucEstPSBkg14438
4.RNC]+
[VS.RAB.SucEstPSBkgMor3
84.RNC]
937
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SucEstPSB
kg.RNC.Rate
Measuremen
t of PS RAB
assignment
setup per
RNC
([VS.RAB.SucEstPSBkg0.32.
RNC]+
[VS.RAB.SucEstPSBkg32.64.
RNC]+
[VS.RAB.SucEstPSBkg64.14
4.RNC]+
[VS.RAB.SucEstPSBkg14438
4.RNC]+
[VS.RAB.SucEstPSBkgMor3
84.RNC])/
[RAB.AttEstabPS.Bgrd]*{100
.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Issue 01 (2016-09-15)
938
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RCC
Report
VS.RRC.AttConnEs
tab.Other
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.AttConnEstab.CellR
es]+
[VS.RRC.AttConnEstab.Reg]
+
[VS.RRC.AttConnEstab.Detac
h]
VS.RRC.SuccConn
Estab.Other
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Cell
Res]+
[VS.RRC.SuccConnEstab.Reg
]+
[VS.RRC.SuccConnEstab.Det
ach]
VS.RRC.SuccConn
Estab.Rate.Other
RRC
connection
setup
measurement
per RNC
([VS.RRC.SuccConnEstab.E
mg]+
[VS.RRC.SuccConnEstab.Cell
Res]+
[VS.RRC.SuccConnEstab.Reg
]+
[VS.RRC.SuccConnEstab.Det
ach]+
[VS.RRC.SuccConnEstab.Un
known])/
([VS.RRC.AttConnEstab.Emg
]+
[VS.RRC.AttConnEstab.CellR
es]+
[VS.RRC.AttConnEstab.Reg]
+
[VS.RRC.AttConnEstab.Detac
h]+
[VS.RRC.AttConnEstab.Unkn
own])*{100.00}
VS.RRC.AttConnEs
tab.Conv
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.AttConnEstab.OrgC
onv]+
[VS.RRC.AttConnEstab.Trm
Conv]
VS.RRC.SuccConn
Estab.Conv
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Org
Conv]+
[VS.RRC.SuccConnEstab.Tr
mConv]
939
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Conv.Rate
RRC
connection
setup
measurement
per RNC
([VS.RRC.SuccConnEstab.Or
gConv]+
[VS.RRC.SuccConnEstab.Tr
mConv])/
([VS.RRC.AttConnEstab.Org
Conv]+
[VS.RRC.AttConnEstab.Trm
Conv])*{100.00}
VS.RRC.AttConnEs
tab.Bkg
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.AttConnEstab.OrgB
kg]+
[VS.RRC.AttConnEstab.Trm
Bkg]
VS.RRC.SuccConn
Estab.Bkg
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Org
Bkg]+
[VS.RRC.SuccConnEstab.Tr
mBkg]
VS.RRC.SuccConn
Estab.Bkg.Rate
RRC
connection
setup
measurement
per RNC
([VS.RRC.SuccConnEstab.Or
gBkg]+
[VS.RRC.SuccConnEstab.Tr
mBkg])/
([VS.RRC.AttConnEstab.Org
Bkg]+
[VS.RRC.AttConnEstab.Trm
Bkg])*{100.00}
VS.RRC.AttConnEs
tab.Int
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.AttConnEstab.OrgI
nt]+
[VS.RRC.AttConnEstab.TrmI
nt]
VS.RRC.SuccConn
Estab.Int
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Org
Int]+
[VS.RRC.SuccConnEstab.Tr
mInt]
VS.RRC.SuccConn
Estab.Int.Rate
RRC
connection
setup
measurement
per RNC
([VS.RRC.SuccConnEstab.Or
gInt]+
[VS.RRC.SuccConnEstab.Tr
mInt])/
([VS.RRC.AttConnEstab.OrgI
nt]+
[VS.RRC.AttConnEstab.TrmI
nt])*{100.00}
940
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.AttConnEs
tab.Org
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.AttConnEstab.OrgC
onv]+
[VS.RRC.AttConnEstab.OrgS
tr]+
[VS.RRC.AttConnEstab.OrgI
nt]+
[VS.RRC.AttConnEstab.OrgB
kg]+
[VS.RRC.AttConnEstab.OrgS
ubs]
VS.RRC.SuccConn
Estab.Org
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Org
Conv]+
[VS.RRC.SuccConnEstab.Org
Str]+
[VS.RRC.SuccConnEstab.Org
Int]+
[VS.RRC.SuccConnEstab.Org
Bkg]+
[VS.RRC.SuccConnEstab.Org
Subs]
VS.RRC.SuccConn
Estab.Org.Rate
RRC
connection
setup
measurement
per RNC
([VS.RRC.SuccConnEstab.Or
gConv]+
[VS.RRC.SuccConnEstab.Org
Str]+
[VS.RRC.SuccConnEstab.Org
Int]+
[VS.RRC.SuccConnEstab.Org
Bkg]+
[VS.RRC.SuccConnEstab.Org
Subs])/
([VS.RRC.AttConnEstab.Org
Conv]+
[VS.RRC.AttConnEstab.OrgS
tr]+
[VS.RRC.AttConnEstab.OrgI
nt]+
[VS.RRC.AttConnEstab.OrgB
kg]+
[VS.RRC.AttConnEstab.OrgS
ubs])*{100.00}
941
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.AttConnEs
tab.Trm
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.AttConnEstab.Trm
Conv]+
[VS.RRC.AttConnEstab.TrmS
tr]+
[VS.RRC.AttConnEstab.TrmI
nt]+
[VS.RRC.AttConnEstab.Trm
Bkg]
VS.RRC.SuccConn
Estab.Trm
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Tr
mConv]+
[VS.RRC.SuccConnEstab.Tr
mStr]+
[VS.RRC.SuccConnEstab.Tr
mInt]+
[VS.RRC.SuccConnEstab.Tr
mBkg]
VS.RRC.SuccConn
Estab.Trm.Rate
RRC
connection
setup
measurement
per RNC
([VS.RRC.SuccConnEstab.Tr
mConv]+
[VS.RRC.SuccConnEstab.Tr
mStr]+
[VS.RRC.SuccConnEstab.Tr
mInt]+
[VS.RRC.SuccConnEstab.Tr
mBkg])/
([VS.RRC.AttConnEstab.Trm
Conv]+
[VS.RRC.AttConnEstab.TrmS
tr]+
[VS.RRC.AttConnEstab.TrmI
nt]+
[VS.RRC.AttConnEstab.Trm
Bkg])*{100.00}
VS.RRC.AttConnEs
tab.Reg
times
RRC
connection
setup
measurement
per RNC
VS.RRC.SuccConn
Estab.Reg
times
RRC
connection
setup
measurement
per RNC
942
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Reg.Rate
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Reg
]/
[VS.RRC.AttConnEstab.Reg
]*{100.00}
VS.RRC.AttConnEs
tab.CellRes
times
RRC
connection
setup
measurement
per RNC
VS.RRC.SuccConn
Estab.CellRes
times
RRC
connection
setup
measurement
per RNC
VS.RRC.SuccConn
Estab.CellRes.Rate
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Cell
Res]/
[VS.RRC.AttConnEstab.CellR
es]*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Issue 01 (2016-09-15)
943
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
VS.AMR.RB.DL.
12.2
numb
er
Measuremen
t related to
AMR service
VS.RB.DLConvCS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.CSLoad.Erlang.
Equiv.RNC
none
Traffic
Measuremen
t per RNC
VS.R99PSLoad.ULT
hruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.R99PSLoad.DLT
hruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.HSUPAPSLoad.
ULThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.HSDPAPSLoad.
DLThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
944
PRS
Performance Report Reference
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
VS.RRC.SuccConn
Estab.Service.Cell.R
ate
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OgCo
nvCall]+
[RRC.SuccConnEstab.OrgStr
Call]+
[RRC.SuccConnEstab.OrgItrC
all]+
[RRC.SuccConnEstab.OrgBkg
Call]+
[RRC.SuccConnEstab.OrgSub
Call]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrC
all]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCa
ll]+
[RRC.SuccConnEstab.Unkow
n]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallRe
Est]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig])/
([RRC.AttConnEstab.OrgCon
vCall]+
[RRC.AttConnEstab.OrgStrCa
ll]+
[RRC.AttConnEstab.OrgInter
Call]+
[RRC.AttConnEstab.OrgBkgC
all]+
[RRC.AttConnEstab.OgSubC
all]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInter
Call]+
945
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100.00}
VS.RRC.SuccConn
Estab.Service.Cell
Issue 01 (2016-09-15)
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.OgCon
vCall]+
[RRC.SuccConnEstab.OrgStr
Call]+
[RRC.SuccConnEstab.OrgItrC
all]+
[RRC.SuccConnEstab.OrgBkg
Call]+
[RRC.SuccConnEstab.OrgSub
Call]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrC
all]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCa
ll]+
[RRC.SuccConnEstab.Unkow
n]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallRe
Est]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig]
946
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.AttConnEs
tab.Service.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.OrgConv
Call]+
[RRC.AttConnEstab.OrgStrCa
ll]+
[RRC.AttConnEstab.OrgInter
Call]+
[RRC.AttConnEstab.OrgBkgC
all]+
[RRC.AttConnEstab.OgSubC
all]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInter
Call]+
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig]
VS.RRC.SuccConn
Estab.Other.Cell.Rat
e
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.IRAT
CelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
)/
([RRC.AttConnEstab.IRATCe
lRes]+
[RRC.AttConnEstab.IRATCC
O]+[RRC.AttConnEstab.Reg]
+
[RRC.AttConnEstab.Detach]
)*{100.00}
947
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Other.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.IRATC
elRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
VS.RRC.AttConnEs
tab.Other.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.IRATCel
Res]+
[RRC.AttConnEstab.IRATCC
O]+[RRC.AttConnEstab.Reg]
+[RRC.AttConnEstab.Detach]
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*{1
00.00}
VS.RAB.SuccEstab.
AMR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstab.A
MR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstCS
.Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstCS.
Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
948
PRS
Performance Report Reference
Subrep
ort
Name
HO
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*{
100.00}
VS.RAB.SuccEstPS.
Cell
none
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.SuccEstabPS.Conv]
+[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+[VS.RAB.SuccEstabPS.Bkg]
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
VS.SHO.Factor.RL
none
Soft
Handover
Measuremen
t per RNC
([VS.SHO.AS.1]+
[VS.SHO.AS.2Softer]*{2}+
[VS.SHO.AS.2Soft]*{2}+
[VS.SHO.AS.3Softer]*{3}+
[VS.SHO.AS.3Soft]*{3}+
[VS.SHO.AS.
3Soft2Softer]*{3}+
[VS.SHO.AS.4]*{4}+
[VS.SHO.AS.5]*{5}+
[VS.SHO.AS.6]*{6})/
([VS.SHO.AS.1]+
[VS.SHO.AS.2Softer]+
[VS.SHO.AS.2Soft]+
[VS.SHO.AS.3Softer]+
[VS.SHO.AS.3Soft]+
[VS.SHO.AS.3Soft2Softer]+
[VS.SHO.AS.4]+
[VS.SHO.AS.5]+
[VS.SHO.AS.6])-{1}
VS.SHO.Succ.Rate
Soft
Handover
Measuremen
t per RNC
[VS.SHO.Succ]/
[VS.SHO.Att.RNC]*{100.00}
949
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.SHO.Succ
times
Soft
Handover
Measuremen
t per RNC
VS.SHO.Att.RNC
times
Soft
Handover
Measuremen
t per RNC
VS.InterFreq.HHO.S
ucc.RNC.Rate
Hard
Handover
Measuremen
t per RNC
[VS.HHO.InterFreq.Succ.RN
C]/
[VS.HHO.InterFreq.Att.RNC
]*{100.00}
VS.HHO.InterFreq.S
ucc.RNC
times
Hard
Handover
Measuremen
t per RNC
VS.HHO.InterFreq.
Att.RNC
times
Hard
Handover
Measuremen
t per RNC
VS.IRATHO.SuccC
SOut.RNC.Rate
Measuremen
t related to
CS IRA
handover per
RNC
[VS.IRATHO.SuccCSOut.RN
C]/
[VS.IRATHO.AttCSOut.RNC
]*{100.00}
VS.IRATHO.SuccC
SOut.RNC
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.IRATHO.AttCS
Out.RNC
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.IRATHO.SuccP
SOutUTRAN.RNC.
Rate
Measuremen
t related to
PS IRA
handover per
RNC
[VS.IRATHO.SuccPSOutUTR
AN.RNC]/
[VS.IRATHO.AttPSOutUTR
AN.RNC]*{100.00}
950
PRS
Performance Report Reference
Subrep
ort
Name
CDR
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.IRATHO.SuccP
SOutUTRAN.RNC
times
Measuremen
t related to
PS IRA
handover per
RNC
VS.IRATHO.AttPS
OutUTRAN.RNC
times
Measuremen
t related to
PS IRA
handover per
RNC
VS.Abnorm.Rel.CS.
AMR.IurLink
times
Measuremen
t related to
SRNC in Iur
interface
VS.Rel.CS.AMR.Iur
Link
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Norm.Rel.CS.AMR.IurLi
nk]+
[VS.Abnorm.Rel.CS.AMR.Iur
Link]
VS.RAB.Loss.CS.A
MR
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.CS.AMR.Releas
e
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R]
VS.Abnorm.Rel.CS.
Conv.RB.64.IurLink
times
Measuremen
t related to
SRNC in Iur
interface
VS.Rel.CS.VP.IurLi
nk
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Norm.Rel.CS.Conv.RB.
64.IurLink]+
[VS.Abnorm.Rel.CS.Conv.RB
.64.IurLink]
951
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.CS.C
onv64K
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.CS.VP.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64]
VS.Abnorm.Rel.PS.I
urLink
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Abnorm.Rel.PS.BE.RB.
0.32.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
32.64.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
64.144.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
144.384.IurLink]+
[VS.Abnorm.Rel.PS.CCH.Iur
Link]
VS.Rel.PS.IurLink
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Norm.Rel.PS.BE.RB.
0.32.IurLink]+
[VS.Norm.Rel.PS.BE.RB.
32.64.IurLink]+
[VS.Norm.Rel.PS.BE.RB.
64.144.IurLink]+
[VS.Norm.Rel.PS.BE.RB.
144.384.IurLink]+
[VS.Norm.Rel.PS.CCH.IurLin
k]+
[VS.Abnorm.Rel.PS.BE.RB.
0.32.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
32.64.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
64.144.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
144.384.IurLink]+
[VS.Abnorm.Rel.PS.CCH.Iur
Link]
952
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
VS.PS.RAB.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
Monthly
VS.AMR.RB.DL.
12.2
numb
er
Measuremen
t related to
AMR service
953
PRS
Performance Report Reference
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BH
Report
VS.RB.DLConvCS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLInterPS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLInterPS.
128.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLInterPS.
144.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLInterPS.
384.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLBkgPS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLBkgPS.
128.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLBkgPS.
144.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLBkgPS.
384.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
954
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
Report
VS.AMR.RB.DL.
12.2
numb
er
Measuremen
t related to
AMR service
VS.RB.DLConvCS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLInterPS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLInterPS.
128.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLInterPS.
144.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
955
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RB.DLInterPS.
384.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLBkgPS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLBkgPS.
128.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLBkgPS.
144.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLBkgPS.
384.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Issue 01 (2016-09-15)
956
PRS
Performance Report Reference
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CDR
RAB.SuccEstabCS
none
Measuremen
t of CS RAB
assignment
setup per
RNC
([RAB.SuccEstabCSNoQueuing.Conv]+
[RAB.SuccEstabCSQueuing.Conv])+
([RAB.SuccEstabCSNoQueuing.Strm]+
[RAB.SuccEstabCSQueuing.Strm])
VS.CS.Call.Drop.R
NC
none
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
[VS.RAB.Loss.CS.Abnorm.R
NC]+
[VS.RAB.Loss.CS.RF.RNC]
VS.CS.Call.Drop.R
NC.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
([VS.RAB.Loss.CS.Abnorm.R
NC]+
[VS.RAB.Loss.CS.RF.RNC])/
(([RAB.SuccEstabCSNoQueui
ng.Conv]+
[RAB.SuccEstabCSQueuing.Conv])+
([RAB.SuccEstabCSNoQueuing.Strm]+
[RAB.SuccEstabCSQueuing.Strm]))*{100.00}
VS.RAB.SuccEstPS.
RNC
none
Measuremen
t of PS RAB
assignment
setup per
RNC
([RAB.SuccEstabPSNoQueuing.Bgrd]+
[RAB.SuccEstabPSQueuing.Bgrd])+
([RAB.SuccEstabPSNoQueuing.Conv]+
[RAB.SuccEstabPSQueuing.Conv])+
([RAB.SuccEstabPSNoQueuing.Intact]+
[RAB.SuccEstabPSQueuing.Intact])+
([RAB.SuccEstabPSQueuing.Strm]+
[RAB.SuccEstabPSNoQueuing.Strm])
957
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.PS.Call.Drop.R
NC
none
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
[VS.RAB.Loss.PS.RF.RNC]+
[VS.RAB.Loss.PS.Abnorm.R
NC]
VS.PS.Call.Drop.R
NC.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
(([VS.RAB.Loss.PS.RF.RNC]
+
[VS.RAB.Loss.PS.Abnorm.R
NC]))/
(([RAB.SuccEstabPSNoQueuing.Bgrd]+
[RAB.SuccEstabPSQueuing.Bgrd])+
([RAB.SuccEstabPSNoQueuing.Conv]+
[RAB.SuccEstabPSQueuing.Conv])+
([RAB.SuccEstabPSNoQueuing.Intact]+
[RAB.SuccEstabPSQueuing.Intact])+
([RAB.SuccEstabPSQueuing.Strm]+
[RAB.SuccEstabPSNoQueuing.Strm]))*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Issue 01 (2016-09-15)
958
PRS
Performance Report Reference
Object Type
RNC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
Traffic
VS.HSDPA.MeanCh
Throughput.TotalM
Bytes
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]/
({1024}*{1024})
VS.HSDPA.UE.Mea
n.Cell
numb
er
HSDPA
Measuremen
t per cell
VS.HSDPA.MeanCh
Throughput.TotalM
Bps
none
HSDPA
Measuremen
t per cell
([VS.HSDPA.MeanChThroug
hput.TotalBytes]*{8.0}/
({1024.0}*{1024.0}))/
({GP}*{60})
VS.HSDPA.RAB.Su
ccEstab.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]
/
[VS.HSDPA.RAB.AttEstab
]*{100.00}
VS.HSDPA.RAB.Su
ccEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.At
tEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ServCell
Chg.Succ.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.Su
ccOut]/
[VS.HSDPA.SHO.CellChg.At
tOut]*{100.00}
VS.HSDPA.SHO.Ce
llChg.SuccOut
times
HSDPA
Measuremen
t per cell
VS.HSDPA.SHO.Ce
llChg.AttOut
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.In
traFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInt
raFreq]/
[VS.HSDPA.HHO.AttOutIntr
aFreq]*{100.00}
HSDPA
Access
HSDPA
HO
Issue 01 (2016-09-15)
959
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.HHO.Su
ccOutIntraFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.At
tOutIntraFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.In
terFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInt
erFreq]/
[VS.HSDPA.HHO.AttOutInte
rFreq]*{100.00}
VS.HSDPA.HHO.Su
ccOutInterFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.At
tOutInterFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.HS
DSCHtoDCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH]/
[VS.HSDPA.ChR.HSDSCHto
DCH.Att]*{100.00}
VS.HSDPA.ChR.HS
DSCHtoDCH
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.HS
DSCHtoDCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.DC
HtoHSDSCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH]/
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att]*{100.00}
VS.HSDPA.ChR.DC
HtoHSDSCH
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.DC
HtoHSDSCH.Att
times
HSDPA
Measuremen
t per cell
960
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
CDR
VS.HSDPA.RAB.A
bnormRel.Rate
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.InAct
ivity]+
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.Succ
OutIntraFreq]+
[VS.HSDPA.HHO.H2D.Succ
OutInterFreq])*{100.00}
VS.HSDPA.RAB.A
bnormRel
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]
VS.HSDPA.RAB.Re
l
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.InActi
vity]+
[VS.HSDPA.RAB.Loss.Abnor
m.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.Succ
OutIntraFreq]+
[VS.HSDPA.HHO.H2D.Succ
OutInterFreq]
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
961
PRS
Performance Report Reference
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA
Access
VS.HSUPA.RAB.Su
ccEstab.Rate
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.SuccEstab]
/
[VS.HSUPA.RAB.AttEstab
]*{100.00}
VS.HSUPA.RAB.Su
ccEstab
numb
er
HSUPA
Measuremen
t per cell
VS.HSUPA.RAB.At
tEstab
numb
er
HSUPA
Measuremen
t per cell
VS.HSUPA.EDCH.
SHO.Succ.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.EDCH.SHO.Suc
c]/
[VS.HSUPA.EDCH.SHO.Att
]*{100.00}
VS.HSUPA.EDCH.
SHO.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.EDCH.
SHO.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.SHO.Se
rvCellChg.Succ.Rati
o
HSUPA
Measuremen
t per cell
[VS.HSUPA.SHO.ServCellCh
g.Succ]/
[VS.HSUPA.SHO.ServCellCh
g.Att]*{100.00}
VS.HSUPA.SHO.Se
rvCellChg.Succ
times
HSUPA
Measuremen
t per cell
HSUPA
HO
Issue 01 (2016-09-15)
962
PRS
Performance Report Reference
Subrep
ort
Name
HSUPA
CDR
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSUPA.SHO.Se
rvCellChg.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.HHO.InterFreq.
NoChR.Succ]/
[VS.HSUPA.HHO.InterFreq.
NoChR.Att]*{100.00}
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.HHO.In
terFreq.NoChR.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.RAB.A
bnormRel.Rate
HSUPA
Measuremen
t per cell
([VS.HSUPA.RAB.Loss.Abno
rm])/
([VS.HSUPA.RAB.Loss.Abno
rm]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ])*{100.00}
VS.HSUPA.RAB.A
bnormRel
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnor
m]
VS.HSUPA.RAB.Re
lease
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnor
m]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ]
963
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
InterRAT HO
Report
VS.IRATHO.AttCS
Out.RNC
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.IRATHO.SuccC
SOut.RNC
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.IRATHO.SuccC
SOut.RNC.Rate
Measuremen
t related to
CS IRA
handover per
RNC
[VS.IRATHO.SuccCSOut.RN
C]/
[VS.IRATHO.AttCSOut.RNC
]*{100.00}
VS.SRELOC.AttPre
p.IRHOCS
times
Measuremen
t related to
CS IRA
handover per
RNC
964
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.SRELOC.SuccPr
ep.IRHOCS
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.SRELOC.SuccPr
ep.IRHOCS.Rate
Measuremen
t related to
CS IRA
handover per
RNC
[VS.SRELOC.SuccPrep.IRH
OCS]/
[VS.SRELOC.AttPrep.IRHO
CS]*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PAGE
Report
VS.RANAP.Paging.
Att.IdleUE
times
Measuremen
t related to
Paging per
RNC
965
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RANAP.Paging.
Succ.IdleUE
times
Measuremen
t related to
Paging per
RNC
VS.RANAP.Paging.
Succ.IdleUE.Rate
Measuremen
t related to
Paging per
RNC
[VS.RANAP.Paging.Succ.Idle
UE]/
[VS.RANAP.Paging.Att.IdleU
E]*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RAB
Report
VS.RAB.AttEstCSC
onv0.32.RNC
numb
er
Measuremen
t of CS RAB
assignment
setup per
RNC
966
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SucEstCS
Conv0.32.RNC
numb
er
Measuremen
t of CS RAB
assignment
setup per
RNC
RAB.SuccEstabCSC
onv0.32.RNC.Rate
Measuremen
t of CS RAB
assignment
setup per
RNC
[VS.RAB.SucEstCSConv0.32.
RNC]/
[VS.RAB.AttEstCSConv0.32.
RNC]*{100.00}
VS.RAB.AttEstCSC
onv32.64.RNC
numb
er
Measuremen
t of CS RAB
assignment
setup per
RNC
VS.RAB.SucEstCS
Conv32.64.RNC
numb
er
Measuremen
t of CS RAB
assignment
setup per
RNC
RAB.SuccEstabCSC
onv32.64.RNC.Rate
Measuremen
t of CS RAB
assignment
setup per
RNC
[VS.RAB.SucEstCSConv32.6
4.RNC]/
[VS.RAB.AttEstCSConv32.64
.RNC]*{100.00}
RAB.AttEstabPS.Int
act
numb
er
Measuremen
t of PS RAB
assignment
setup per
RNC
VS.RAB.SucEstPSI
nt.RNC
none
Measuremen
t of PS RAB
assignment
setup per
RNC
[VS.RAB.SucEstPSInt0.32.R
NC]+
[VS.RAB.SucEstPSInt32.64.R
NC]+
[VS.RAB.SucEstPSInt64.144.
RNC]+
[VS.RAB.SucEstPSInt144384
.RNC]+
[VS.RAB.SucEstPSIntMor38
4.RNC]
967
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SucEstPSI
nt.RNC.Rate
Measuremen
t of PS RAB
assignment
setup per
RNC
([VS.RAB.SucEstPSInt0.32.R
NC]+
[VS.RAB.SucEstPSInt32.64.R
NC]+
[VS.RAB.SucEstPSInt64.144.
RNC]+
[VS.RAB.SucEstPSInt144384
.RNC]+
[VS.RAB.SucEstPSIntMor38
4.RNC])/
[RAB.AttEstabPS.Intact]*{10
0.00}
RAB.AttEstabPS.Bg
rd
numb
er
Measuremen
t of PS RAB
assignment
setup per
RNC
VS.RAB.SucEstPSB
kg.RNC
none
Measuremen
t of PS RAB
assignment
setup per
RNC
[VS.RAB.SucEstPSBkg0.32.
RNC]+
[VS.RAB.SucEstPSBkg32.64.
RNC]+
[VS.RAB.SucEstPSBkg64.14
4.RNC]+
[VS.RAB.SucEstPSBkg14438
4.RNC]+
[VS.RAB.SucEstPSBkgMor3
84.RNC]
VS.RAB.SucEstPSB
kg.RNC.Rate
Measuremen
t of PS RAB
assignment
setup per
RNC
([VS.RAB.SucEstPSBkg0.32.
RNC]+
[VS.RAB.SucEstPSBkg32.64.
RNC]+
[VS.RAB.SucEstPSBkg64.14
4.RNC]+
[VS.RAB.SucEstPSBkg14438
4.RNC]+
[VS.RAB.SucEstPSBkgMor3
84.RNC])/
[RAB.AttEstabPS.Bgrd]*{100
.00}
968
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
VS.AMR.RB.DL.
12.2
numb
er
Measuremen
t related to
AMR service
VS.RB.DLConvCS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.CSLoad.Erlang.
Equiv.RNC
none
Traffic
Measuremen
t per RNC
VS.R99PSLoad.ULT
hruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.R99PSLoad.DLT
hruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.HSUPAPSLoad.
ULThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
969
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPAPSLoad.
DLThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
970
PRS
Performance Report Reference
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
VS.RRC.SuccConn
Estab.Service.Cell.R
ate
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OgCo
nvCall]+
[RRC.SuccConnEstab.OrgStr
Call]+
[RRC.SuccConnEstab.OrgItrC
all]+
[RRC.SuccConnEstab.OrgBkg
Call]+
[RRC.SuccConnEstab.OrgSub
Call]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrC
all]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCa
ll]+
[RRC.SuccConnEstab.Unkow
n]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallRe
Est]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig])/
([RRC.AttConnEstab.OrgCon
vCall]+
[RRC.AttConnEstab.OrgStrCa
ll]+
[RRC.AttConnEstab.OrgInter
Call]+
[RRC.AttConnEstab.OrgBkgC
all]+
[RRC.AttConnEstab.OgSubC
all]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInter
Call]+
971
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100.00}
VS.RRC.SuccConn
Estab.Service.Cell
Issue 01 (2016-09-15)
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.OgCon
vCall]+
[RRC.SuccConnEstab.OrgStr
Call]+
[RRC.SuccConnEstab.OrgItrC
all]+
[RRC.SuccConnEstab.OrgBkg
Call]+
[RRC.SuccConnEstab.OrgSub
Call]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrC
all]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCa
ll]+
[RRC.SuccConnEstab.Unkow
n]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallRe
Est]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig]
972
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.AttConnEs
tab.Service.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.OrgConv
Call]+
[RRC.AttConnEstab.OrgStrCa
ll]+
[RRC.AttConnEstab.OrgInter
Call]+
[RRC.AttConnEstab.OrgBkgC
all]+
[RRC.AttConnEstab.OgSubC
all]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInter
Call]+
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall
]+
[RRC.AttConnEstab.Unknow
n]+
[RRC.AttConnEstab.OgHhPr
Sig]+
[RRC.AttConnEstab.OgLwPr
Sig]+
[RRC.AttConnEstab.CallReEs
t]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig]
VS.RRC.SuccConn
Estab.Other.Cell.Rat
e
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.IRAT
CelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
)/
([RRC.AttConnEstab.IRATCe
lRes]+
[RRC.AttConnEstab.IRATCC
O]+[RRC.AttConnEstab.Reg]
+
[RRC.AttConnEstab.Detach]
)*{100.00}
973
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Other.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.IRATC
elRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
VS.RRC.AttConnEs
tab.Other.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.IRATCel
Res]+
[RRC.AttConnEstab.IRATCC
O]+[RRC.AttConnEstab.Reg]
+[RRC.AttConnEstab.Detach]
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*{1
00.00}
VS.RAB.SuccEstab.
AMR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstab.A
MR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstCS
.Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstCS.
Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
974
PRS
Performance Report Reference
Subrep
ort
Name
HO
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*{
100.00}
VS.RAB.SuccEstPS.
Cell
none
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.SuccEstabPS.Conv]
+[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+[VS.RAB.SuccEstabPS.Bkg]
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
VS.SHO.Factor.RL
none
Soft
Handover
Measuremen
t per RNC
([VS.SHO.AS.1]+
[VS.SHO.AS.2Softer]*{2}+
[VS.SHO.AS.2Soft]*{2}+
[VS.SHO.AS.3Softer]*{3}+
[VS.SHO.AS.3Soft]*{3}+
[VS.SHO.AS.
3Soft2Softer]*{3}+
[VS.SHO.AS.4]*{4}+
[VS.SHO.AS.5]*{5}+
[VS.SHO.AS.6]*{6})/
([VS.SHO.AS.1]+
[VS.SHO.AS.2Softer]+
[VS.SHO.AS.2Soft]+
[VS.SHO.AS.3Softer]+
[VS.SHO.AS.3Soft]+
[VS.SHO.AS.3Soft2Softer]+
[VS.SHO.AS.4]+
[VS.SHO.AS.5]+
[VS.SHO.AS.6])-{1}
VS.SHO.Succ.Rate
Soft
Handover
Measuremen
t per RNC
[VS.SHO.Succ]/
[VS.SHO.Att.RNC]*{100.00}
975
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.SHO.Succ
times
Soft
Handover
Measuremen
t per RNC
VS.SHO.Att.RNC
times
Soft
Handover
Measuremen
t per RNC
VS.InterFreq.HHO.S
ucc.RNC.Rate
Hard
Handover
Measuremen
t per RNC
[VS.HHO.InterFreq.Succ.RN
C]/
[VS.HHO.InterFreq.Att.RNC
]*{100.00}
VS.HHO.InterFreq.S
ucc.RNC
times
Hard
Handover
Measuremen
t per RNC
VS.HHO.InterFreq.
Att.RNC
times
Hard
Handover
Measuremen
t per RNC
VS.IRATHO.SuccC
SOut.RNC.Rate
Measuremen
t related to
CS IRA
handover per
RNC
[VS.IRATHO.SuccCSOut.RN
C]/
[VS.IRATHO.AttCSOut.RNC
]*{100.00}
VS.IRATHO.SuccC
SOut.RNC
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.IRATHO.AttCS
Out.RNC
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.IRATHO.SuccP
SOutUTRAN.RNC.
Rate
Measuremen
t related to
PS IRA
handover per
RNC
[VS.IRATHO.SuccPSOutUTR
AN.RNC]/
[VS.IRATHO.AttPSOutUTR
AN.RNC]*{100.00}
976
PRS
Performance Report Reference
Subrep
ort
Name
CDR
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.IRATHO.SuccP
SOutUTRAN.RNC
times
Measuremen
t related to
PS IRA
handover per
RNC
VS.IRATHO.AttPS
OutUTRAN.RNC
times
Measuremen
t related to
PS IRA
handover per
RNC
VS.Abnorm.Rel.CS.
AMR.IurLink
times
Measuremen
t related to
SRNC in Iur
interface
VS.Rel.CS.AMR.Iur
Link
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Norm.Rel.CS.AMR.IurLi
nk]+
[VS.Abnorm.Rel.CS.AMR.Iur
Link]
VS.RAB.Loss.CS.A
MR
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.CS.AMR.Releas
e
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R]
VS.Abnorm.Rel.CS.
Conv.RB.64.IurLink
times
Measuremen
t related to
SRNC in Iur
interface
VS.Rel.CS.VP.IurLi
nk
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Norm.Rel.CS.Conv.RB.
64.IurLink]+
[VS.Abnorm.Rel.CS.Conv.RB
.64.IurLink]
977
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.CS.C
onv64K
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.CS.VP.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64]
VS.Abnorm.Rel.PS.I
urLink
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Abnorm.Rel.PS.BE.RB.
0.32.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
32.64.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
64.144.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
144.384.IurLink]+
[VS.Abnorm.Rel.PS.CCH.Iur
Link]
VS.Rel.PS.IurLink
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Norm.Rel.PS.BE.RB.
0.32.IurLink]+
[VS.Norm.Rel.PS.BE.RB.
32.64.IurLink]+
[VS.Norm.Rel.PS.BE.RB.
64.144.IurLink]+
[VS.Norm.Rel.PS.BE.RB.
144.384.IurLink]+
[VS.Norm.Rel.PS.CCH.IurLin
k]+
[VS.Abnorm.Rel.PS.BE.RB.
0.32.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
32.64.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
64.144.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
144.384.IurLink]+
[VS.Abnorm.Rel.PS.CCH.Iur
Link]
978
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
VS.PS.RAB.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Issue 01 (2016-09-15)
979
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC
Report
VS.RRC.AttConnEs
tab
times
RRC
connection
setup
measurement
per RNC
VS.RRC.FailConEst
.RNC
times
RRC
connection
setup
measurement
per RNC
VS.RRC.SetupConn
Estab
times
RRC
connection
setup
measurement
per RNC
VS.RRC.SuccConn
Estab
times
RRC
connection
setup
measurement
per RNC
VS.RRC.SuccConn
Estab.Rate
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab]/
[VS.RRC.AttConnEstab]*{10
0.00}
VS.RRC.AttConnEs
tab.Conv
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.AttConnEstab.OrgC
onv]+
[VS.RRC.AttConnEstab.Trm
Conv]
VS.RRC.SuccConn
Estab.Conv
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Org
Conv]+
[VS.RRC.SuccConnEstab.Tr
mConv]
980
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Conv.Rate
RRC
connection
setup
measurement
per RNC
([VS.RRC.SuccConnEstab.Or
gConv]+
[VS.RRC.SuccConnEstab.Tr
mConv])/
([VS.RRC.AttConnEstab.Org
Conv]+
[VS.RRC.AttConnEstab.Trm
Conv])*{100.00}
VS.RRC.AttConnEs
tab.Bkg
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.AttConnEstab.OrgB
kg]+
[VS.RRC.AttConnEstab.Trm
Bkg]
VS.RRC.SuccConn
Estab.Bkg
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Org
Bkg]+
[VS.RRC.SuccConnEstab.Tr
mBkg]
VS.RRC.SuccConn
Estab.Bkg.Rate
RRC
connection
setup
measurement
per RNC
([VS.RRC.SuccConnEstab.Or
gBkg]+
[VS.RRC.SuccConnEstab.Tr
mBkg])/
([VS.RRC.AttConnEstab.Org
Bkg]+
[VS.RRC.AttConnEstab.Trm
Bkg])*{100.00}
VS.RRC.AttConnEs
tab.Int
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.AttConnEstab.OrgI
nt]+
[VS.RRC.AttConnEstab.TrmI
nt]
VS.RRC.SuccConn
Estab.Int
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Org
Int]+
[VS.RRC.SuccConnEstab.Tr
mInt]
VS.RRC.SuccConn
Estab.Int.Rate
RRC
connection
setup
measurement
per RNC
([VS.RRC.SuccConnEstab.Or
gInt]+
[VS.RRC.SuccConnEstab.Tr
mInt])/
([VS.RRC.AttConnEstab.OrgI
nt]+
[VS.RRC.AttConnEstab.TrmI
nt])*{100.00}
981
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.AttConnEs
tab.Trm
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.AttConnEstab.Trm
Conv]+
[VS.RRC.AttConnEstab.TrmS
tr]+
[VS.RRC.AttConnEstab.TrmI
nt]+
[VS.RRC.AttConnEstab.Trm
Bkg]
VS.RRC.SuccConn
Estab.Trm
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Tr
mConv]+
[VS.RRC.SuccConnEstab.Tr
mStr]+
[VS.RRC.SuccConnEstab.Tr
mInt]+
[VS.RRC.SuccConnEstab.Tr
mBkg]
VS.RRC.SuccConn
Estab.Trm.Rate
RRC
connection
setup
measurement
per RNC
([VS.RRC.SuccConnEstab.Tr
mConv]+
[VS.RRC.SuccConnEstab.Tr
mStr]+
[VS.RRC.SuccConnEstab.Tr
mInt]+
[VS.RRC.SuccConnEstab.Tr
mBkg])/
([VS.RRC.AttConnEstab.Trm
Conv]+
[VS.RRC.AttConnEstab.TrmS
tr]+
[VS.RRC.AttConnEstab.TrmI
nt]+
[VS.RRC.AttConnEstab.Trm
Bkg])*{100.00}
VS.RRC.AttConnEs
tab.CellRes
times
RRC
connection
setup
measurement
per RNC
VS.RRC.SuccConn
Estab.CellRes
times
RRC
connection
setup
measurement
per RNC
982
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.CellRes.Rate
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Cell
Res]/
[VS.RRC.AttConnEstab.CellR
es]*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
Weekly
BH
VS.CSLoad.Erlang.
Equiv.RNC
none
Traffic
Measuremen
t per RNC
VS.R99PSLoad.DLT
hruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.HSDPAPSLoad.
DLThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
983
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.MBMSPSLoad.
DLThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
Weekly
VS.CSLoad.Erlang.
Equiv.RNC
none
Traffic
Measuremen
t per RNC
VS.R99PSLoad.DLT
hruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.HSDPAPSLoad.
DLThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
984
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.MBMSPSLoad.
DLThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
985
PRS
Performance Report Reference
22
Issue 01 (2016-09-15)
986
PRS
Performance Report Reference
NE Type
USN
Object Type
USN and SGSN
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Gb mode
mobility
manage
ment
Gb mode GPRS
attach request times
times
Gb mode
attach
times
Gb mode
intra-SGSN
RAU
times
Gb mode
inter-SGSN
RAU
Gb mode
session
manage
ment
Gb mode MS init
PDP context act
times
Gb mode
PDP context
activation
Gb mode
resource
Gb mode average
attached users
numb
er
Gb mode
radio
resource
numb
er
Gb mode SM
resource
Gb mode packet
paging request times
times
Gb mode
paging
Gb mode
paging
Issue 01 (2016-09-15)
987
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
USN
Object Type
USN and SGSN
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Iu mode
mobility
manage
ment
Iu mode GPRS
attach request times
times
Iu mode
attach
Iu mode intra-SGSN
RAU request times
times
Iu mode
intra-SGSN
RAU
Iu mode Inter-SGSN
RAU request times
times
Iu mode
inter-SGSN
RAU
Iu mode
session
manage
ment
Iu mode MS init
PDP context act
times
Iu mode PDP
context
activation
Iu mode
resource
Iu mode average
attached users
numb
er
Iu mode
radio
resource
Iu mode average
active PDP context
numb
er
Iu mode SM
resource
988
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Iu mode
paging
Iu mode packet
paging request times
times
Iu mode
paging
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
USN
Object Type
MTP3 link
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
MTP3
link
Erl
MTP3 link
Erl
MTP3 link
MTP3 link
congestion
times
MTP3 link
MTP3 link
MTP3 link
989
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
USN
Object Type
USN and SGSN
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Data
transfer
kB
GTPU bearer
GTP Kbytes
received from
GGSN
kB
GTPU bearer
Downlink data
Kbytes sent to
SNDCP
kB
GTPU bearer
kB
GTPU bearer
Downlink data
Kbytes sent to RNC
kB
GTPU bearer
kB
GTPU bearer
990
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
991
PRS
Performance Report Reference
23
Issue 01 (2016-09-15)
992
PRS
Performance Report Reference
NE Type
UGW
Object Type
UGW and GGSN
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
AAA
performa
nce
Authentication
requests
times
AAA
performance
measurement
Accounting start
requests
times
AAA
performance
measurement
Accounting stop
requests
times
AAA
performance
measurement
Real-time
accounting requests
times
AAA
performance
measurement
Authentication
requests
times
AAA
performance
measurement
(specified
APN)
Accounting start
requests
times
AAA
performance
measurement
(specified
APN)
APN
AAA
Performa
nce
Issue 01 (2016-09-15)
993
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accounting stop
requests
times
AAA
performance
measurement
(specified
APN)
Real-time
accounting requests
times
AAA
performance
measurement
(specified
APN)
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
UGW
Object Type
UGW and GGSN
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Basic
session
service
PDP context
activation requests
times
GGSN Basic
session
performance
measurement
994
PRS
Performance Report Reference
Subrep
ort
Name
Apn
session
performa
nce
Counter
Coun
ter
Unit
Function
Subset
Formula
Current activated
PDP contexts
numb
er
GGSN Basic
session
performance
measurement
GTPv1 MS-init.
activation requests
times
GTPv1
session
measurement
(specified
APN)
GTPv0 MS-init.
activation requests
times
GTPv0
session
measurement
(specified
APN)
Current activated
PDP contexts (APN)
numb
er
Session
status
measurement
(specified
APN)
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
UGW
Object Type
UGW and GGSN
Issue 01 (2016-09-15)
995
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Data
transfer
measure
ment
Gn peak throughput
in MB/s
MB/s
GGSN
Forwarding
performance
measurement
Gi peak throughput
in MB/s
MB/s
GGSN
Forwarding
performance
measurement
Gn uplink traffic in
MB
MB
GGSN
Forwarding
performance
measurement
Gn downlink traffic
in MB
MB
GGSN
Forwarding
performance
measurement
Gi uplink traffic in
MB
MB
GGSN
Forwarding
performance
measurement
Gi downlink traffic
in MB
MB
GGSN
Forwarding
performance
measurement
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
996
PRS
Performance Report Reference
24
Issue 01 (2016-09-15)
997
PRS
Performance Report Reference
NE Type
SGSN
Object Type
USN and SGSN
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Gb mode
mobility
manage
ment
Gb mode GPRS
attach request times
times
Gb mode
attach
Gb mode GPRS
attach success ratio
Gb mode
attach
times
Gb mode
intra-SGSN
RAU
Gb mode
intra-SGSN
RAU
times
Gb mode
inter-SGSN
RAU
Gb mode inter-RAU
success ratio
Gb mode
inter-SGSN
RAU
Gb mode MS init
PDP context act
times
Gb mode
PDP context
activation
Gb mode MS init
PDP context act
success ratio
Gb mode
PDP context
activation
Gb mode
session
manage
ment
Issue 01 (2016-09-15)
998
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Gb mode
resource
Gb mode average
attached users
numb
er
Gb mode
radio
resource
numb
er
Gb mode SM
resource
Gb mode packet
paging request times
times
Gb mode
paging
Gb mode packet
paging success ratio
Gb mode
paging
Gb mode
paging
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SGSN
Object Type
USN and SGSN
Issue 01 (2016-09-15)
999
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Iu mode
mobility
manage
ment
Iu mode GPRS
attach request times
times
Iu mode
attach
Iu mode GPRS
attach suucess ratio
Iu mode
attach
Iu mode intra-SGSN
RAU request times
times
Iu mode
intra-SGSN
RAU
Iu mode intra-RAU
success ratio
Iu mode
intra-SGSN
RAU
Iu mode inter-SGSN
RAU request times
times
Iu mode
inter-SGSN
RAU
Iu mode inter-RAU
success ratio
Iu mode
inter-SGSN
RAU
Iu mode
session
manage
ment
Iu mode MS init
PDP context act
times
Iu mode PDP
context
activation
Iu mode MS init
PDP context act
success ratio
Iu mode PDP
context
activation
Iu mode
resource
Iu mode average
attached users
numb
er
Iu mode
radio
resource
Iu mode average
active PDP context
numb
er
Iu mode SM
resource
Iu mode packet
paging request times
times
Iu mode
paging
Iu mode packet
paging success ratio
Iu mode
paging
Iu mode
paging
Issue 01 (2016-09-15)
1000
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SGSN
Object Type
Board
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CPU
resource
times
System
resource
CPU overload
duration
System
resource
CPU congestion
times
times
System
resource
CPU congestion
duration
System
resource
Average CPU
occupation ratio(%)
System
resource
1001
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SGSN
Object Type
MTP3 link
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
MTP3
link
Erl
MTP3 link
Erl
MTP3 link
MTP3 link
congestion
times
MTP3 link
MTP3 link
MTP3 link
1002
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SGSN
Object Type
USN and SGSN
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Data
transfer
kiloby
tes
GTPU bearer
kiloby
tes
GTPU bearer
Downlink data
kbytes sent to
SNDCP
kiloby
tes
GTPU bearer
kiloby
tes
GTPU bearer
Downlink data
kbytes sent to RNC
kiloby
tes
GTPU bearer
kiloby
tes
GTPU bearer
1003
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1004
PRS
Performance Report Reference
25
Issue 01 (2016-09-15)
1005
PRS
Performance Report Reference
NE Type
SG7000
Object Type
DSP
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DSP
Duration of adjacent
SP inaccessible
DSP
numb
er
DSP
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Issue 01 (2016-09-15)
1006
PRS
Performance Report Reference
Object Type
Link
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
LINK
Duration of SL
unavailability(for
any reason)
LINK
Duration of link in
the In-service state
LINK
numb
er
LINK
numb
er
LINK
numb
er
LINK
Number of message
signal units received
numb
er
LINK
Number of message
signal units
transmitted
numb
er
LINK
Number of negative
ack. Received
times
LINK
Number of signal
units received in
error
times
LINK
SL alignment or
proving failure
numb
er
LINK
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1007
PRS
Performance Report Reference
NE Type
SG7000
Object Type
Link Set
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
LINKSE
T
Duration of
unavailability of
signalling linkset
LINKSET
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Object Type
M3UA ASSOAS
Issue 01 (2016-09-15)
1008
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M3UA
ASSOAS
Duration of adjacent
AS inaccessible
M3UA
ASSOAS
M3UA
ASSOAS
Message discarded
due to a routing data
error
numb
er
M3UA
ASSOAS
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Object Type
M3UA Link
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M3UA
Link
Bytes of receieved
message in one
m3ua association
byte
M3UA
LINK
1009
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Bytes of sent
message in one
m3ua association
byte
M3UA
LINK
Duration of m3ua
association
availability
M3UA
LINK
Duration of m3ua
association
unavailability
M3UA
LINK
Number of receieved
message in one
m3ua association
times
M3UA
LINK
Number of sent
message in one
m3ua association
numb
er
M3UA
LINK
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Object Type
M3UA Link Set
Issue 01 (2016-09-15)
1010
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M3UA
LinkSet
Duration of m3ua
association set
unavailability
M3UA
LINKSET
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Object Type
SG7000NE
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SCCP
globle
Total messages
requiring global title
translation
numb
er
SCCP global
UDT messages
received
numb
er
SCCP global
numb
er
SCCP global
UDTS messages
received
numb
er
SCCP global
1011
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
UDTS messages
sent
numb
er
SCCP global
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Object Type
CPU Load
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CPU
Usage
Report
CPU Load
CPU Load
1012
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
DSP Report
DSP Report
NE Type
SG7000
Object Type
DSP
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DSP
Report
Duration of
unavailability
DSP
Times of
unavailability
times
DSP
Discarded MSU
numb
er
DSP
1013
PRS
Performance Report Reference
Object Type
Link Set
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Link Set
Load
Report
Transmitted load
Erl
LINK
Received load
Erl
LINK
Transmitted and
received load
Erl
LINK
[Transmitted load]+[Received
load]
Number of message
signal units received
numb
er
LINK
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Object Type
DSP
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DSP
Report
Duration of
unavailability
DSP
1014
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Times of
unavailability
times
DSP
Discarded MSU
numb
er
DSP
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Object Type
Link
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Link
Load
Busy
Hour
Report
Maximum received
load
Erl
LINK
Maximum
transmitted load
Erl
LINK
Maximum
bidirectional load
Erl
LINK
[Transmitted load]+[Received
load]
1015
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Object Type
Link
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Link
Load
Report
numb
er
LINK
Number of message
signal units
transmitted
numb
er
LINK
Maximum
transmitted load
Erl
LINK
Average transmitted
load
Erl
LINK
numb
er
LINK
Number of message
signal units received
numb
er
LINK
Maximum received
load
Erl
LINK
Average received
load
Erl
LINK
1016
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Average transmitted
and received load
Erl
LINK
Average number of
SIF and SIO octets
transmitted per MSU
numb
er
LINK
Average number of
SIF and SIO octets
received per MSU
numb
er
LINK
Duration of link in
the In-service state
LINK
Number of signal
units received in
error
times
LINK
Maximum
transmitted/received
load
Erl
LINK
MAX([Maximum transmitted
load],[Maximum received
load])
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Object Type
Link Set
Issue 01 (2016-09-15)
1017
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Link Set
Load
Busy
Hour
Report
Maximum received
load
Erl
LINK
Maximum
transmitted load
Erl
LINK
Maximum
bidirectional load
Erl
LINK
[Transmitted load]+[Received
load]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Object Type
Link Set
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Link Set
Load
Report
Transmitted load
Erl
LINK
Received load
Erl
LINK
Transmitted and
received load
Erl
LINK
[Transmitted load]+[Received
load]
1018
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of message
signal units received
numb
er
LINK
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Object Type
Link
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Link
Usage
and
Availabil
ity
Report
Transmitted load
Erl
LINK
Received load
Erl
LINK
Transmitted MSU
per sencond
numb
er
LINK
numb
er
LINK
Number of message
signal units
transmitted
numb
er
LINK
1019
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of message
signal units received
numb
er
LINK
Bytes of transmitted
messages
numb
er
LINK
Bytes of received
messages
numb
er
LINK
Duration of
availability
LINK
Duration of
unavailability
LINK
Link usage
LINK
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Object Type
Link
Issue 01 (2016-09-15)
1020
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M2PA
Link
Busy
Hour
Report
Maximum sent
messages
numb
er
M2PA LINK
Bytes of sent
messages
byte
M2PA LINK
Maximum received
messages
numb
er
M2PA LINK
Bytes of received
messages
byte
M2PA LINK
Maximum sent/
received messages
numb
er
M2PA LINK
Maximum
bidirectional
messages
numb
er
M2PA LINK
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Object Type
Link
Issue 01 (2016-09-15)
1021
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M2PA
Link
Report
Total number of
transmitted
messages
numb
er
M2PA LINK
Maximum number
of transmitted
messages
numb
er
M2PA LINK
Minimum number of
transmitted
messages
numb
er
M2PA LINK
Average number of
transmitted
messages
numb
er
M2PA LINK
Bytes of transmitted
messages
byte
M2PA LINK
Total number of
received messages
numb
er
M2PA LINK
Maximum number
of received
messages
numb
er
M2PA LINK
Minimum number of
received messages
numb
er
M2PA LINK
Average number of
received messages
numb
er
M2PA LINK
Bytes of received
messages
byte
M2PA LINK
Duration of
availability
M2PA LINK
Duration of
unavailability
M2PA LINK
Maximum number
of transmitted/
received messages
numb
er
M2PA LINK
MAX([Maximum number of
transmitted messages],
[Maximum number of
received messages])
1022
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Object Type
M3UA Link
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M3UA
Link
Busy
Hour
Report
Maximum sent
messages
numb
er
M3UA
LINK
Bytes of sent
messages
byte
M3UA
LINK
Maximum received
messages
numb
er
M3UA
LINK
Bytes of received
messages
byte
M3UA
LINK
Maximum sent/
received messages
numb
er
M3UA
LINK
Maximum
bidirectional
messages
numb
er
M3UA
LINK
1023
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Object Type
M3UA Link
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M3UA
Link
Report
Total number of
transmitted
messages
numb
er
M3UA
LINK
Maximum number
of transmitted
messages
numb
er
M3UA
LINK
Minimum number of
transmitted
messages
numb
er
M3UA
LINK
Average number of
transmitted
messages
numb
er
M3UA
LINK
Bytes of transmitted
messages
byte
M3UA
LINK
Total number of
receieved messages
times
M3UA
LINK
1024
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Maximum number
of received
messages
numb
er
M3UA
LINK
Minimum number of
received messages
numb
er
M3UA
LINK
Average number of
received messages
numb
er
M3UA
LINK
Bytes of receieved
messages
byte
M3UA
LINK
Duration of
availability
M3UA
LINK
Duration of
unavailability
M3UA
LINK
Maximum number
of transmitted/
received messages
numb
er
M3UA
LINK
MAX([Maximum number of
transmitted messages],
[Maximum number of
received messages])
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SG7000
Object Type
SG7000NE
Issue 01 (2016-09-15)
1025
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Total
Message
s
Requirin
g Global
Title
Translati
on
Report
Total messages
requiring global title
translation
numb
er
SCCP global
Maximum messages
requiring global title
translation per
second
numb
er
SCCP global
numb
er
SCCP global
Maximum number
of sent UDT
messages per second
numb
er
SCCP global
UDT messages
received
numb
er
SCCP global
Maximum number
of received UDT
messages per second
numb
er
SCCP global
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1026
PRS
Performance Report Reference
26
Issue 01 (2016-09-15)
1027
PRS
Performance Report Reference
NE Type
SPS
Object Type
M3UA Link
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M3UA
Link
Bytes of receieved
message in one
m3ua association
byte
M3UA
LINK
Bytes of sent
message in one
m3ua association
byte
M3UA
LINK
Duration of m3ua
association
availability
M3UA
LINK
Duration of m3ua
association
unavailability
M3UA
LINK
Number of receieved
message in one
m3ua association
times
M3UA
LINK
Number of sent
message in one
m3ua association
numb
er
M3UA
LINK
1028
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPS
Object Type
SPSNE
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SCCP
globle
Total messages
requiring global title
translation
numb
er
SCCP global
UDT messages
received
numb
er
SCCP global
numb
er
SCCP global
UDTS messages
received
numb
er
SCCP global
UDTS messages
sent
numb
er
SCCP global
1029
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPS
Object Type
M3UA Link Set
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M3UA
LinkSet
Duration of m3ua
association set
unavailability
M3UA
LINKSET
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1030
PRS
Performance Report Reference
NE Type
SPS
Object Type
Link
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
LINK
Duration of SL
unavailability(for
any reason)
LINK
Duration of link in
the In-service state
LINK
numb
er
LINK
numb
er
LINK
numb
er
LINK
Number of message
signal units received
numb
er
LINK
Number of message
signal units
transmitted
numb
er
LINK
Number of negative
ack. Received
times
LINK
Number of signal
units received in
error
times
LINK
SL alignment or
proving failure
numb
er
LINK
1031
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPS
Object Type
M3UA ASSOAS
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M3UA
ASSOAS
Duration of adjacent
AS inaccessible
M3UA
ASSOAS
M3UA
ASSOAS
Message discarded
due to a routing data
error
numb
er
M3UA
ASSOAS
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1032
PRS
Performance Report Reference
NE Type
SPS
Object Type
Link Set
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
LINKSE
T
Duration of
unavailability of
signalling linkset
LINKSET
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPS
Object Type
DSP
Issue 01 (2016-09-15)
1033
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DSP
Duration of adjacent
SP inaccessible
DSP
numb
er
DSP
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1034
PRS
Performance Report Reference
27
1035
PRS
Performance Report Reference
Issue 01 (2016-09-15)
1036
PRS
Performance Report Reference
NE Type
SPSV3
Object Type
Module
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CPU
Usage
Report
CPU Usage
Measuremen
t
CPU Usage
Measuremen
t
CPU Usage
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1037
PRS
Performance Report Reference
NE Type
SPSV3
Object Type
Module
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Diameter
SCTP
Send
Load
Busy
Hour
Report
SCTP Load
Measuremen
t
Number of Sent
Data Chunks
times
SCTP Load
Measuremen
t
Number of Received
Data Chunks
times
SCTP Load
Measuremen
t
Receive Load
SCTP Load
Measuremen
t
Bidirectional Load
SCTP Load
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1038
PRS
Performance Report Reference
NE Type
SPSV3
Object Type
Module
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Number
of Sent
Diameter
SCTP
Data
Chunks
Busy
Hour
Report
times
SCTP Load
Measuremen
t
Number of Received
Data Chunks
times
SCTP Load
Measuremen
t
Send Load
SCTP Load
Measuremen
t
Receive Load
SCTP Load
Measuremen
t
Bidirectional Load
SCTP Load
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Issue 01 (2016-09-15)
1039
PRS
Performance Report Reference
NE Type
SPSV3
Object Type
Module
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Diameter
SCTP
Load
Measure
ment
Report
Number of Sent
Data Chunks
times
SCTP Load
Measuremen
t
Number of Received
Data Chunks
times
SCTP Load
Measuremen
t
Send Load
SCTP Load
Measuremen
t
Receive Load
SCTP Load
Measuremen
t
Bidirectional Load
SCTP Load
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Issue 01 (2016-09-15)
1040
PRS
Performance Report Reference
Object Type
Module
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Number
of Sent
Diameter
SCTP
Data
Chunks
Busy
Hour
Report
times
SCTP Load
Measuremen
t
Number of Received
Data Chunks
times
SCTP Load
Measuremen
t
Send Load
SCTP Load
Measuremen
t
Receive Load
SCTP Load
Measuremen
t
Bidirectional Load
SCTP Load
Measuremen
t
1041
PRS
Performance Report Reference
Object Type
Module
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Number
of
Received
Diameter
SCTP
Data
Chunks
Busy
Hour
Report
Max Number of
Received Data
Chunks
times
SCTP Load
Measuremen
t
Number of Sent
Data Chunks
times
SCTP Load
Measuremen
t
Send Load
SCTP Load
Measuremen
t
Receive Load
SCTP Load
Measuremen
t
Bidirectional Load
SCTP Load
Measuremen
t
Object Type
Module
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Diameter
SCTP
Send
Load
Busy
SCTP Load
Measuremen
t
1042
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Hour
Report
Number of Sent
Data Chunks
times
SCTP Load
Measuremen
t
Number of Received
Data Chunks
times
SCTP Load
Measuremen
t
Receive Load
SCTP Load
Measuremen
t
Bidirectional Load
SCTP Load
Measuremen
t
Object Type
Module
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Diameter
SCTP
Receive
Load
Busy
Hour
Report
SCTP Load
Measuremen
t
Number of Sent
Data Chunks
times
SCTP Load
Measuremen
t
Number of Received
Data Chunks
times
SCTP Load
Measuremen
t
Send Load
SCTP Load
Measuremen
t
1043
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Bidirectional Load
SCTP Load
Measuremen
t
Object Type
Module
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Diameter
SCTP
Bidirecti
onal
Load
Busy
Hour
Report
Max Bidirectional
Load
SCTP Load
Measuremen
t
Number of Sent
Data Chunks
times
SCTP Load
Measuremen
t
Number of Received
Data Chunks
times
SCTP Load
Measuremen
t
Send Load
SCTP Load
Measuremen
t
Receive Load
SCTP Load
Measuremen
t
1044
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Module
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Diameter
SCTP
Receive
Load
Busy
Hour
Report
SCTP Load
Measuremen
t
Number of Sent
Data Chunks
times
SCTP Load
Measuremen
t
Number of Received
Data Chunks
times
SCTP Load
Measuremen
t
Send Load
SCTP Load
Measuremen
t
Bidirectional Load
SCTP Load
Measuremen
t
1045
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Module
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Number
of
Received
Diameter
SCTP
Data
Chunks
Busy
Hour
Report
Max Number of
Received Data
Chunks
times
SCTP Load
Measuremen
t
Number of Sent
Data Chunks
times
SCTP Load
Measuremen
t
Send Load
SCTP Load
Measuremen
t
Receive Load
SCTP Load
Measuremen
t
Bidirectional Load
SCTP Load
Measuremen
t
1046
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Module
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Diameter
SCTP
Bidirecti
onal
Load
Busy
Hour
Report
Max Bidirectional
Load
SCTP Load
Measuremen
t
Number of Sent
Data Chunks
times
SCTP Load
Measuremen
t
Number of Received
Data Chunks
times
SCTP Load
Measuremen
t
Send Load
SCTP Load
Measuremen
t
Receive Load
SCTP Load
Measuremen
t
1047
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Diameter Agent
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Diameter
Interface
Message
Measure
ment
Report
Number of S6a/S6d
Application
Received Request
Messages
times
Diameter
Interface
Message
Meaurement
Number of S6a/S6d
Application Sent
Request Messages
times
Diameter
Interface
Message
Meaurement
Number of S6a/S6d
Application
Received Response
Messages
times
Diameter
Interface
Message
Meaurement
Number of S6a/S6d
Application Sent
Response Messages
times
Diameter
Interface
Message
Meaurement
1048
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of S9
Application
Received Request
Messages
times
Diameter
Interface
Message
Meaurement
Number of S9
Application Sent
Request Messages
times
Diameter
Interface
Message
Meaurement
Number of S9
Application
Received Response
Messages
times
Diameter
Interface
Message
Meaurement
Number of S9
Application Sent
Response Messages
times
Diameter
Interface
Message
Meaurement
Number of Gx
Application
Received Request
Messages
times
Diameter
Interface
Message
Meaurement
Number of Gx
Application Sent
Request Messages
times
Diameter
Interface
Message
Meaurement
Number of Gx
Application
Received Response
Messages
times
Diameter
Interface
Message
Meaurement
Number of Gx
Application Sent
Response Messages
times
Diameter
Interface
Message
Meaurement
Number of Rx
Application
Received Request
Messages
times
Diameter
Interface
Message
Meaurement
Number of Rx
Application Sent
Request Messages
times
Diameter
Interface
Message
Meaurement
1049
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Rx
Application
Received Response
Messages
times
Diameter
Interface
Message
Meaurement
Number of Rx
Application Sent
Response Messages
times
Diameter
Interface
Message
Meaurement
Number of Gy/Ro
Application
Received Request
Messages
times
Diameter
Interface
Message
Meaurement
Number of Gy/Ro
Application Sent
Request Messages
times
Diameter
Interface
Message
Meaurement
Number of Gy/Ro
Application
Received Response
Messages
times
Diameter
Interface
Message
Meaurement
Number of Gy/Ro
Application Sent
Response Messages
times
Diameter
Interface
Message
Meaurement
Number of Other
Application
Received Request
Messages
times
Diameter
Interface
Message
Meaurement
Number of Other
Application Sent
Request Messages
times
Diameter
Interface
Message
Meaurement
Number of Other
Application
Received Response
Messages
times
Diameter
Interface
Message
Meaurement
Number of Other
Application Sent
Response Messages
times
Diameter
Interface
Message
Meaurement
1050
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Diameter Link
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Diameter
Link
Measure
ment
Report
Number of Received
Request Messages
times
Diameter
Link
Measuremen
t
Number of Sent
Request Messages
times
Diameter
Link
Measuremen
t
Number of Received
Response Messages
times
Diameter
Link
Measuremen
t
Number of Sent
Response Messages
times
Diameter
Link
Measuremen
t
1051
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Bytes of Received
Request Messages
byte
Diameter
Link
Measuremen
t
Bytes of Sent
Request Messages
byte
Diameter
Link
Measuremen
t
Bytes of Received
Response Messages
byte
Diameter
Link
Measuremen
t
Bytes of Sent
Response Messages
byte
Diameter
Link
Measuremen
t
SCTP Association
Retransmitted Times
times
Diameter
Link
Measuremen
t
SCTP Association
Send Buffer
Overflow Times
times
Diameter
Link
Measuremen
t
SCTP Association
Receive Buffer
Overflow Times
times
Diameter
Link
Measuremen
t
SCTP Association
Average
Acknowledgement
Delay
ms
Diameter
Link
Measuremen
t
SCTP Association
Average
Acknowledgement
Delay Deviation
ms
Diameter
Link
Measuremen
t
SCTP Association
Unavailable Times
times
Diameter
Link
Measuremen
t
1052
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SCTP Association
Unavailable
Duration
Diameter
Link
Measuremen
t
SCTP Association
Sent Buffer Usage
Diameter
Link
Measuremen
t
SCTP Association
Receive Buffer
Usage
Diameter
Link
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Diameter Agent
Issue 01 (2016-09-15)
1053
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Diameter
Message
Measure
ment
Report
Number of Diameter
Messages Used
packe
t/s
Diameter
Message
Measuremen
t
Number of Received
Diameter Messages
times
Diameter
Message
Measuremen
t
Number of Sent
Diameter Messages
times
Diameter
Message
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Diameter Agent
Issue 01 (2016-09-15)
1054
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Diameter
Service
Failure
Measure
ment
Report
Number of Routed
Failure Messages
times
Diameter
Service
Failure
Measuremen
t
Number of Rerouted
Messages
times
Diameter
Service
Failure
Measuremen
t
Number of
Retransmitted
Messages
times
Diameter
Service
Failure
Measuremen
t
Number of Discard
Messages for
Congestion
times
Diameter
Service
Failure
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Issue 01 (2016-09-15)
1055
PRS
Performance Report Reference
Object Type
M2PA Link
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M2PA
Link
Load
Report
Number of Sent
Data Messages
times
M2PA Link
Measuremen
t
Maximum Number
of Sent Messages
numb
er
M2PA Link
Measuremen
t
Minimum Number
of Sent Messages
numb
er
M2PA Link
Measuremen
t
Average Number of
Sent Messages
numb
er
M2PA Link
Measuremen
t
byte
M2PA Link
Measuremen
t
Number of Received
Data Messages
times
M2PA Link
Measuremen
t
Maximum Number
of Received
Messages
numb
er
M2PA Link
Measuremen
t
Minimum Number
of Received
Messages
numb
er
M2PA Link
Measuremen
t
Average Number of
Received Messages
numb
er
M2PA Link
Measuremen
t
Bytes of Received
Data Messages
byte
M2PA Link
Measuremen
t
Available Duration
M2PA Link
Measuremen
t
1056
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Unavailable
Duration
M2PA Link
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
M2PA Link
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M2PA
Link
Load
Busy
Hour
Report
M2PA Link
Measuremen
t
Maximum Sent
Messages
numb
er
M2PA Link
Measuremen
t
Bytes of Sent
Messages
byte
M2PA Link
Measuremen
t
1057
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Received Message
Time
M2PA Link
Measuremen
t
Maximum Received
Messages
numb
er
M2PA Link
Measuremen
t
Bytes of Received
Messages
byte
M2PA Link
Measuremen
t
Sent/Received
Message Time
M2PA Link
Measuremen
t
Maximum Sent/
Received Messages
numb
er
M2PA Link
Measuremen
t
Bidirectional
Message Time
M2PA Link
Measuremen
t
Maximum
Bidirectional
Messages
numb
er
M2PA Link
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Issue 01 (2016-09-15)
1058
PRS
Performance Report Reference
Object Type
M3UA Link
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M3UA
Link
Load
Report
Number of Sent
Messages
times
M3UA Link
Measuremen
t
Maximum Number
of Sent Messages
numb
er
M3UA Link
Measuremen
t
Minimum Number
of Sent Messages
numb
er
M3UA Link
Measuremen
t
Average Number of
Sent Messages
numb
er
M3UA Link
Measuremen
t
Bytes of Sent
Messages
byte
M3UA Link
Measuremen
t
Number of Received
Messages
times
M3UA Link
Measuremen
t
Maximum Number
of Received
Messages
numb
er
M3UA Link
Measuremen
t
Minimum Number
of Received
Messages
numb
er
M3UA Link
Measuremen
t
Average Number of
Received Messages
numb
er
M3UA Link
Measuremen
t
Bytes of Received
Messages
byte
M3UA Link
Measuremen
t
Available Duration
M3UA Link
Measuremen
t
1059
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Unavailable
Duration
M3UA Link
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
M3UA Link
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M3UA
Link
Load
Busy
Hour
Report
M3UA Link
Measuremen
t
Maximum Sent
Messages
numb
er
M3UA Link
Measuremen
t
Bytes of Sent
Messages
byte
M3UA Link
Measuremen
t
1060
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Received Message
Time
M3UA Link
Measuremen
t
Maximum Received
Messages
numb
er
M3UA Link
Measuremen
t
Bytes of Received
Messages
byte
M3UA Link
Measuremen
t
Sent/Received
Message Time
M3UA Link
Measuremen
t
Maximum Sent/
Received Messages
numb
er
M3UA Link
Measuremen
t
Bidirectional
Message Time
M3UA Link
Measuremen
t
Maximum
Bidirectional
Messages
numb
er
M3UA Link
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1061
PRS
Performance Report Reference
DSP Report
Object Type
M2PA Link
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M2PA
Link
Load
Report
Number of Sent
Data Messages
times
M2PA Link
Measuremen
t
Maximum Number
of Sent Messages
numb
er
M2PA Link
Measuremen
t
Minimum Number
of Sent Messages
numb
er
M2PA Link
Measuremen
t
Average Number of
Sent Messages
numb
er
M2PA Link
Measuremen
t
byte
M2PA Link
Measuremen
t
Number of Received
Data Messages
times
M2PA Link
Measuremen
t
Maximum Number
of Received
Messages
numb
er
M2PA Link
Measuremen
t
1062
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Minimum Number
of Received
Messages
numb
er
M2PA Link
Measuremen
t
Average Number of
Received Messages
numb
er
M2PA Link
Measuremen
t
Bytes of Received
Data Messages
byte
M2PA Link
Measuremen
t
Available Duration
M2PA Link
Measuremen
t
Unavailable
Duration
M2PA Link
Measuremen
t
Object Type
M3UA Link
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M3UA
Link
Load
Report
Number of Sent
Messages
times
M3UA Link
Measuremen
t
Maximum Number
of Sent Messages
numb
er
M3UA Link
Measuremen
t
Minimum Number
of Sent Messages
numb
er
M3UA Link
Measuremen
t
1063
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Number of
Sent Messages
numb
er
M3UA Link
Measuremen
t
Bytes of Sent
Messages
byte
M3UA Link
Measuremen
t
Number of Received
Messages
times
M3UA Link
Measuremen
t
Maximum Number
of Received
Messages
numb
er
M3UA Link
Measuremen
t
Minimum Number
of Received
Messages
numb
er
M3UA Link
Measuremen
t
Average Number of
Received Messages
numb
er
M3UA Link
Measuremen
t
Bytes of Received
Messages
byte
M3UA Link
Measuremen
t
Available Duration
M3UA Link
Measuremen
t
Unavailable
Duration
M3UA Link
Measuremen
t
Object Type
SPSV3
Issue 01 (2016-09-15)
1064
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Total
Message
s
Requirin
g Global
Title
Translati
on
Report
Total messages
requiring global title
translation
times
GT Translate
Information
Measuremen
t
Total messages
requiring global title
translation(Maximu
m/second)
numb
er
GT Translate
Information
Measuremen
t
Number of Sent
UDT Messages
times
GT Translate
Information
Measuremen
t
Number of Sent
UDT
Messages(Maximum
/second)
numb
er
GT Translate
Information
Measuremen
t
Number of Received
UDT Messages
times
GT Translate
Information
Measuremen
t
Number of Received
UDT
Messages(Maximum
/second)
numb
er
GT Translate
Information
Measuremen
t
Object Type
Module
Issue 01 (2016-09-15)
1065
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CPU
Usage
Report
CPU Usage
Measuremen
t
CPU Usage
Measuremen
t
CPU Usage
Measuremen
t
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Link
Load
Report
byte
MTP Link
Measuremen
t
Number of Message
Signal Units
Transmitted
times
MTP Link
Measuremen
t
Maximum
Transmitted Load
Erl
MTP Link
Measuremen
t
Average Transmitted
Load
Erl
MTP Link
Measuremen
t
Object Type
Link
Subreport Information
Issue 01 (2016-09-15)
1066
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
byte
MTP Link
Measuremen
t
Number of Message
Signal Units
Received
times
MTP Link
Measuremen
t
Maximum Received
Load
Erl
MTP Link
Measuremen
t
Average Received
Load
Erl
MTP Link
Measuremen
t
Average Transmitted
and Received Load
Erl
MTP Link
Measuremen
t
None
MTP Link
Measuremen
t
None
MTP Link
Measuremen
t
Duration of
Availability of Link
MTP Link
Measuremen
t
Maximum Received
MSU per sencond
numb
er
MTP Link
Measuremen
t
Maximum
Transmitted MSU
per sencond
numb
er
MTP Link
Measuremen
t
Number of Signal
Units Received in
Error
times
MTP Link
Measuremen
t
Maximum
Transmitted/
Received Load
Erl
MTP Link
Measuremen
t
MAX{[Maximum Transmitted
Load],[Maximum Received
Load]}
1067
PRS
Performance Report Reference
NE Type
SPSV3
Object Type
MTP Linkset
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Linkset
Load
Report
Transmitted Load
Erl
MTP Link
Measuremen
t
Received Load
Erl
MTP Link
Measuremen
t
Transmitted and
Received Load
Erl
MTP Link
Measuremen
t
[Transmitted Load]+
[Received Load]
NE Type
SPSV3
Object Type
Link
Issue 01 (2016-09-15)
1068
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Link
Usage
and
Availabil
ity
Report
Average Transmitted
Load
Erl
MTP Link
Measuremen
t
Average Received
Load
Erl
MTP Link
Measuremen
t
Number of Message
Signal Units
Transmitted
times
MTP Link
Measuremen
t
Number of Message
Signal Units
Received
times
MTP Link
Measuremen
t
Maximum
Transmitted MSU
per sencond
numb
er
MTP Link
Measuremen
t
Maximum Received
MSU per sencond
numb
er
MTP Link
Measuremen
t
byte
MTP Link
Measuremen
t
byte
MTP Link
Measuremen
t
Duration of
Availability of Link
MTP Link
Measuremen
t
Duration of
Unavailability of
Link
MTP Link
Measuremen
t
Link Usage
MTP Link
Measuremen
t
DSP Report
Report Type
Simple Report
Issue 01 (2016-09-15)
1069
PRS
Performance Report Reference
NE Type
SPSV3
Object Type
MTP Destination Signaling Point
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DSP
Report
Destination
Signaling Point
Inaccessible
times
MTP
Destination
Signaling
Point
Measuremen
t
Duration of
Destination
Signaling Point
Inaccessible
MTP
Destination
Signaling
Point
Measuremen
t
times
MTP
Destination
Signaling
Point
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1070
PRS
Performance Report Reference
NE Type
SPSV3
Object Type
MTP Destination Signaling Point
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DSP
Report
Destination
Signaling Point
Inaccessible
times
MTP
Destination
Signaling
Point
Measuremen
t
Duration of
Destination
Signaling Point
Inaccessible
MTP
Destination
Signaling
Point
Measuremen
t
times
MTP
Destination
Signaling
Point
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1071
PRS
Performance Report Reference
NE Type
SPSV3
Object Type
Link
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Link
Load
Report
byte
MTP Link
Measuremen
t
Number of Message
Signal Units
Transmitted
times
MTP Link
Measuremen
t
Maximum
Transmitted Load
Erl
MTP Link
Measuremen
t
Average Transmitted
Load
Erl
MTP Link
Measuremen
t
byte
MTP Link
Measuremen
t
Number of Message
Signal Units
Received
times
MTP Link
Measuremen
t
Maximum Received
Load
Erl
MTP Link
Measuremen
t
Average Received
Load
Erl
MTP Link
Measuremen
t
Average Transmitted
and Received Load
Erl
MTP Link
Measuremen
t
None
MTP Link
Measuremen
t
1072
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
None
MTP Link
Measuremen
t
Duration of
Availability of Link
MTP Link
Measuremen
t
Maximum Received
MSU per sencond
numb
er
MTP Link
Measuremen
t
Maximum
Transmitted MSU
per sencond
numb
er
MTP Link
Measuremen
t
Number of Signal
Units Received in
Error
times
MTP Link
Measuremen
t
Maximum
Transmitted/
Received Load
Erl
MTP Link
Measuremen
t
MAX{[Maximum Transmitted
Load],[Maximum Received
Load]}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Link
Issue 01 (2016-09-15)
1073
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Link
Load
Busy
Hour
Report
Maximum Received
Load
Erl
MTP Link
Measuremen
t
None
None
Maximum
Transmitted Load
Erl
MTP Link
Measuremen
t
Transmitted Load
Time
None
None
Maximum
Bidirectional Load
Erl
MTP Link
Measuremen
t
Bidirectional Load
Time
None
None
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
MTP Linkset
Issue 01 (2016-09-15)
1074
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Linkset
Load
Report
Transmitted Load
Erl
MTP Link
Measuremen
t
Received Load
Erl
MTP Link
Measuremen
t
Transmitted and
Received Load
Erl
MTP Link
Measuremen
t
[Transmitted Load]+
[Received Load]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
MTP Linkset
Issue 01 (2016-09-15)
1075
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Linkset
Load
Busy
Hour
Report
Maximum Received
Load
Erl
MTP Link
Measuremen
t
None
None
Maximum
Transmitted Load
Erl
MTP Link
Measuremen
t
Transmitted Load
Time
None
None
Maximum
Bidirectional Load
Erl
MTP Link
Measuremen
t
Bidirectional Load
Time
None
None
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
Link
Issue 01 (2016-09-15)
1076
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Link
Usage
and
Availabil
ity
Report
Average Transmitted
Load
Erl
MTP Link
Measuremen
t
Average Received
Load
Erl
MTP Link
Measuremen
t
Number of Message
Signal Units
Transmitted
times
MTP Link
Measuremen
t
Number of Message
Signal Units
Received
times
MTP Link
Measuremen
t
Maximum
Transmitted MSU
per sencond
numb
er
MTP Link
Measuremen
t
Maximum Received
MSU per sencond
numb
er
MTP Link
Measuremen
t
byte
MTP Link
Measuremen
t
byte
MTP Link
Measuremen
t
Duration of
Availability of Link
MTP Link
Measuremen
t
Duration of
Unavailability of
Link
MTP Link
Measuremen
t
Link Usage
MTP Link
Measuremen
t
1077
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
SPSV3
Object Type
SPSV3
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Total
Message
s
Requirin
g Global
Title
Translati
on
Report
Total messages
requiring global title
translation
times
GT Translate
Information
Measuremen
t
Total messages
requiring global title
translation(Maximu
m/second)
numb
er
GT Translate
Information
Measuremen
t
Number of Sent
UDT Messages
times
GT Translate
Information
Measuremen
t
Number of Sent
UDT
Messages(Maximum
/second)
numb
er
GT Translate
Information
Measuremen
t
1078
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Received
UDT Messages
times
GT Translate
Information
Measuremen
t
Number of Received
UDT
Messages(Maximum
/second)
numb
er
GT Translate
Information
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1079
PRS
Performance Report Reference
28
Issue 01 (2016-09-15)
1080
PRS
Performance Report Reference
NE Type
Whole Network
Object Type
Whole Network
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VoLTE
KPI
Report
Register IN
Subscriber Number
times
ATS Register
Data
Measuremen
t
MO-SMS Successful
Rate
IP-SM-GW
Measuremen
t
MT-SMS Successful
Rate
IP-SM-GW
Measuremen
t
Number of
Registered Users
times
S-CSCF
Access Type
User
Measuremen
t
Rate of Successful
Initial Registrations
S-CSCF
Access Type
and Office
Registration
Measuremen
t
1081
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Rate of Successful
Registrations (with
Subscriber Cause)
S-CSCF
Session
Unrelated
Measuremen
t
([Number of S-CSCF
Successful Initial
Registrations]+[Number of SCSCF Successful
Deregistrations]+[Number of
S-CSCF Successful Reregistrations]+[003 Number of
SIP Operation Errors]+[004
Number of Invalid IMPU
Errors]+[008 Number of
Authentication Algorithm
Errors]+[017 Number of
Register and Deregister
Requests Not Match Errors]
+[018 Number of Subsequent
Register with Changed CallID Errors]+[025 Number of
Authentication Failures]+[026
Number of Invalid Subsequent
Register Messages]+[030
Number of Deregisters
Initiated by Unregistered
Users])/([Number of S-CSCF
Initial Registration Attempts]+
[Number of S-CSCF
Deregistration Attempts]+
[Number of S-CSCF Reregistration Attempts])*{100}
Rate of Successful
Re-registrations
S-CSCF
Access Type
and Office
Registration
Measuremen
t
Rate of Successful
Authentication
Attempts
S-CSCF
Session
Unrelated
Measuremen
t
Rate of Responses
(with Subscriber
Cause) to MO
Incoming Sessions
S-CSCF
Access Type
MO
Incoming
Session
Measuremen
t
1082
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Rate of Responses
(with Subscriber
Cause) to MO
Outgoing Sessions
S-CSCF
Access Type
MO
Outgoing
Session
Measuremen
t
Rate of Responses
(with Subscriber
Cause) to MT
Incoming Sessions
S-CSCF
Access Type
MT
Incoming
Session
Measuremen
t
Rate of Responses
(with Subscriber
Cause) to MT
Outgoing Sessions
S-CSCF
Access Type
MT
Outgoing
Session
Measuremen
t
MO Incoming
Session Answer
Rate
S-CSCF
Access Type
MO
Incoming
Session
Measuremen
t
MO Outgoing
Session Answer
Rate
S-CSCF
Access Type
MO
Outgoing
Session
Measuremen
t
MT Incoming
Session Answer
Rate
S-CSCF
Access Type
MT
Incoming
Session
Measuremen
t
1083
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
MT Outgoing
Session Answer
Rate
S-CSCF
Access Type
MT
Outgoing
Session
Measuremen
t
S-CSCF
Access Type
Mean
Duration
from
Answering
to Release
Measuremen
t
MO-SMS through
SGs Success Rate
Short
Message
Service
MT-SMS through
SGs Success Rate
Short
Message
Service
eSRVCC Success
Rate(4G to 2G)
2G eSRVCC
Service
Measuremen
t
[Number of 2G eSRVCC
Services with Successful
Radio Handovers and
ISTs]*{100}/([Number of
Requested 2G Intra-MSC
eSRVCC Handovers]+
[Number of Requested 2G
Inter-MSC eSRVCC
Handovers]-[Number of
Cancelled 2G eSRVCC
Services Before SRVCC IWF
Sends SRVCC PS to CS
Response Messages]-[Number
of Cancelled 2G eSRVCC
Services After SRVCC IWF
Sends SRVCC PS to CS
Response Messages])
1084
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
eSRVCC Success
Rate(4G to 3G)
3G eSRVCC
Service
Measuremen
t
[Number of 3G eSRVCC
Services with Successful
Radio Handovers and
ISTs]*{100}/([Number of
Requested 3G Intra-MSC
eSRVCC Handovers]+
[Number of Requested 3G
Inter-MSC eSRVCC
Handovers]-[Number of
Cancelled 3G eSRVCC
Services Before SRVCC IWF
Sends SRVCC PS to CS
Response Messages]-[Number
of Cancelled 3G eSRVCC
Services After SRVCC IWF
Sends SRVCC PS to CS
Response Messages])
eSRVCC Session
Transfer Success
Rate
eSRVCC
Statistics
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1085
PRS
Performance Report Reference
29
Issue 01 (2016-09-15)
1086
PRS
Performance Report Reference
29.1 BSC
29.1.1 A Interface
29.1.1.1 A Interface(IP, Same User and Signaling Interfaces)
Report Type
Simple Report
NE Type
2GBSC
Object Type
FEGE
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
A
Interfac
e(IP,
Same
User and
Signaling
Interface
s)
Mean Receive
Utilization Rate of A
Interface User Plane
(Same Interface of
User Plane and
Signaling Plane)
FE/GE
Ethernet Port
Measuremen
t
Mean Transmit
Utilization Rate of A
Interface User Plane
(Same Interface of
User Plane and
Signaling Plane)
FE/GE
Ethernet Port
Measuremen
t
Peak Receive
Utilization Rate of A
Interface User Plane
(Same Interface of
User Plane and
Signaling Plane)
FE/GE
Ethernet Port
Measuremen
t
1087
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Peak Transmit
Utilization Rate of A
Interface User Plane
(Same Interface of
User Plane and
Signaling Plane)
FE/GE
Ethernet Port
Measuremen
t
Highest Transmit
Utilization Rate of A
Interface Signaling
Plane (Same
Interface of User
Plane and Signaling
Plane)
FE/GE
Ethernet Port
Measuremen
t
Lowest Transmit
Utilization Rate of A
Interface Signaling
Plane (Same
Interface of User
Plane and Signaling
Plane)
FE/GE
Ethernet Port
Measuremen
t
Mean Transmit
Utilization Rate of A
Interface Signaling
Plane (Same
Interface of User
Plane and Signaling
Plane)
FE/GE
Ethernet Port
Measuremen
t
Highest Receive
Utilization Rate of A
Interface Signaling
Plane (Same
Interface of User
Plane and Signaling
Plane)
FE/GE
Ethernet Port
Measuremen
t
Lowest Receive
Utilization Rate of A
Interface Signaling
Plane (Same
Interface of User
Plane and Signaling
Plane)
FE/GE
Ethernet Port
Measuremen
t
1088
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Mean Receive
Utilization Rate of A
Interface Signaling
Plane (Same
Interface of User
Plane and Signaling
Plane)
FE/GE
Ethernet Port
Measuremen
t
Highest Receive
Utilization Rate of A
Interface (Same
Interface of User
Plane and Signaling
Plane)
FE/GE
Ethernet Port
Measuremen
t
Lowest Receive
Utilization Rate of A
Interface (Same
Interface of User
Plane and Signaling
Plane)
FE/GE
Ethernet Port
Measuremen
t
Mean Receive
Utilization Rate of A
Interface (Same
Interface of User
Plane and Signaling
Plane)
FE/GE
Ethernet Port
Measuremen
t
Highest Transmit
Utilization Rate of A
Interface (Same
Interface of User
Plane and Signaling
Plane)
FE/GE
Ethernet Port
Measuremen
t
Lowest Transmit
Utilization Rate of A
Interface (Same
Interface of User
Plane and Signaling
Plane)
FE/GE
Ethernet Port
Measuremen
t
Mean Transmit
Utilization Rate of A
Interface (Same
Interface of User
Plane and Signaling
Plane)
FE/GE
Ethernet Port
Measuremen
t
1089
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
FEGE
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
A
Interface
Signaling
Plane(IP,
Different
User and
Signaling
Interface
s)
Highest Receive
Utilization Rate of A
Interface Signaling
Plane (Different
Interfaces of User
Plane and Signaling
Plane)
FE/GE
Ethernet Port
Measuremen
t
Lowest Receive
Utilization Rate of A
Interface Signaling
Plane (Different
Interfaces of User
Plane and Signaling
Plane)
FE/GE
Ethernet Port
Measuremen
t
Mean Receive
Utilization Rate of A
Interface Signaling
Plane (Different
Interfaces of User
Plane and Signaling
Plane)
FE/GE
Ethernet Port
Measuremen
t
1090
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Highest Transmit
Utilization Rate of A
Interface Signaling
Plane (Different
Interfaces of User
Plane and Signaling
Plane)
FE/GE
Ethernet Port
Measuremen
t
Lowest Transmit
Utilization Rate of A
Interface Signaling
Plane (Different
Interfaces of User
Plane and Signaling
Plane)
FE/GE
Ethernet Port
Measuremen
t
Mean Transmit
Utilization Rate of A
Interface Signaling
Plane (Different
Interfaces of User
Plane and Signaling
Plane)
FE/GE
Ethernet Port
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
GBSC
Issue 01 (2016-09-15)
1091
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
A
Interface
Signaling
Plane(IP)
A Interface
Signaling Plane DL
Throughput (IP)
kbit/s
TRX
Measuremen
t per BSC
A Interface
Signaling Plane UL
Throughput (IP)
kbit/s
TRX
Measuremen
t per BSC
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
MTP3LNK
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
A
Interface
Signaling
Plane(T
DM)
A Interface
Signaling Resource
Transmit Utilization
Rate (TDM)
MTP2 Link
Measuremen
t
1092
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
A Interface
Signaling Resource
Receive Utilization
Rate (TDM)
MTP2 Link
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
FEGE
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
A
Interface
User
Plane(IP,
Different
User and
Signaling
Interface
s)
Highest Receive
Utilization Rate of A
Interface User Plane
(Different Interfaces
of User Plane and
Signaling Plane)
FE/GE
Ethernet Port
Measuremen
t
1093
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Lowest Receive
Utilization Rate of A
Interface User Plane
(Different Interfaces
of User Plane and
Signaling Plane)
FE/GE
Ethernet Port
Measuremen
t
Mean Receive
Utilization Rate of A
Interface User Plane
(Different Interfaces
of User Plane and
Signaling Plane)
FE/GE
Ethernet Port
Measuremen
t
Highest Transmit
Utilization Rate of A
Interface User Plane
(Different Interfaces
of User Plane and
Signaling Plane)
FE/GE
Ethernet Port
Measuremen
t
Lowest Transmit
Utilization Rate of A
Interface User Plane
(Different Interfaces
of User Plane and
Signaling Plane)
FE/GE
Ethernet Port
Measuremen
t
Mean Transmit
Utilization Rate of A
Interface User Plane
(Different Interfaces
of User Plane and
Signaling Plane)
FE/GE
Ethernet Port
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1094
PRS
Performance Report Reference
NE Type
2GBSC
Object Type
QAAL2 Node
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
A
Interface
User
Plane(IP
POOL)
A Interface User
Plane
Utilization_DL (IP
POOL)
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
A Interface User
Plane
Throughput_DL (IP
POOL)
kbit/s
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
A Interface User
Plane
BandWidth_DL(IP
POOL)
kbit/s
Measuremen
t related to
QAAL2 CM
Parameter_G
SM
A Interface User
Plane
Utilization_UL (IP
POOL)
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
1095
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
A Interface User
Plane
Throughput_UL (IP
POOL)
kbit/s
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
A Interface User
Plane
BandWidth_UL(IP
POOL)
kbit/s
Measuremen
t related to
QAAL2 CM
Parameter_G
SM
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
DPC Group
Issue 01 (2016-09-15)
1096
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
A
Interface
User
Plane(T
DM)
A Interface
Resource Utilization
Rate (TDM)
A-Interface
Circuit
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
GBSC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Ater
Interfac
e(TDM)
Ater Interface
Resource Utilization
Rate (TDM)
Ater
Interface
Circuit
Measuremen
t per TC
Subrack
1097
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.3 Board
29.1.3.1 CS Board Resource(BSC6900GSM)
Report Type
Simple Report
NE Type
2GBSC
Object Type
GBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS
Board
Resource
CS Board Resource
Utilization
Rate_BSC6900
TRX
Measuremen
t per BSC
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1098
PRS
Performance Report Reference
NE Type
2GBSC
Object Type
GBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS
Board
Resource
CS Board Resource
Utilization
Rate_BSC6910
Access
Measuremen
t per BSC
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.3.3 DPU(BSC6900GSM)
Report Type
Simple Report
NE Type
2GBSC
Object Type
Board
Issue 01 (2016-09-15)
1099
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DPU
DPU
Subsystem
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.3.4 EGPU/EXPU(CP)(BSC6910GSM)
Report Type
Simple Report
NE Type
2GBSC
Object Type
SubSys Virtual Group
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
EGPU/
EXPU(C
P)
EGPU/EXPU Board
CP CPU Utilization
Rate (Mean)_GSM
Subsystem
Measuremen
t
EGPU/EXPU Board
CP Subsystem
Number_GSM
None
Measuremen
t related to
EGPU
Subsystem
Configuratio
n
1100
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
SubSys Virtual Group
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
EGPU/
EXPU(C
S UP)
EGPU/EXPU Board
CS UP CPU
Utilization Rate
(Mean)_GSM
Subsystem
Measuremen
t
EGPU/EXPU Board
CS UP Subsystem
Number_GSM
None
Measuremen
t related to
EGPU
Subsystem
Configuratio
n
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1101
PRS
Performance Report Reference
NE Type
2GBSC
Object Type
SubSys Virtual Group
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
EGPU/
EXPU(P
S UP)
EGPU/EXPU Board
PS UP CPU
Utilization Rate
(Mean)_GSM
Subsystem
Measuremen
t
EGPU/EXPU Board
PS UP Subsystem
Number_GSM
None
Measuremen
t related to
EGPU
Subsystem
Configuratio
n
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.3.7 INT(BSC6900GSM)
Report Type
Simple Report
NE Type
2GBSC
Issue 01 (2016-09-15)
1102
PRS
Performance Report Reference
Object Type
Board
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
INT
Interface
Board
Subsystem
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.3.8 INT(Signaling)(BSC6910GSM)
Report Type
Simple Report
NE Type
2GBSC
Object Type
CPU
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
INT(Sign
aling)
CPU
Measuremen
t
1103
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.3.9 INT(User)(BSC6910GSM)
Report Type
Simple Report
NE Type
2GBSC
Object Type
Board
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
INT(Use
r)
Interface
Board
Subsystem
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1104
PRS
Performance Report Reference
NE Type
2GBSC
Object Type
GBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS Board
Resource
PS Board Resource
Utilization
Rate_BSC6910
PS
Capability
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
GBSC
Issue 01 (2016-09-15)
1105
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS Board
Resource
PS Board Resource
Utilizable
Rate_BSC6900
PDCH
Resource
Capability
Measuremen
t per BSC
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.3.12 RMP(BSC6910GSM)
Report Type
Simple Report
NE Type
2GBSC
Object Type
CPU
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RMP
CPU
Measuremen
t
1106
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.3.13 SCU(BSC6910GSM)
Report Type
Simple Report
NE Type
2GBSC
Object Type
CPU
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SCU
CPU
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.3.14 SCU(BSC6900GSM)
Report Type
Simple Report
Issue 01 (2016-09-15)
1107
PRS
Performance Report Reference
NE Type
2GBSC
Object Type
Board
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SCU
SCU
Subsystem
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
Inter-Subrack Traffic Object
Issue 01 (2016-09-15)
1108
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SCU Tx
Ability
InterSubrack
Traffic
Measuremen
t
kbit/s
InterSubrack
Traffic
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
Inter-Subrack Traffic Object
Issue 01 (2016-09-15)
1109
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SCU Tx
Ability
InterSubrack
Traffic
Measuremen
t
kbit/s
InterSubrack
Traffic
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.3.17 TNU(BSC6900GSM)
Report Type
Simple Report
NE Type
2GBSC
Object Type
Board
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TNU
TNU
Measuremen
t
1110
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.3.18 XPU(BSC6900GSM)
Report Type
Simple Report
NE Type
2GBSC
Object Type
Board
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
XPU
XPU
Subsystem
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.4 Gb
Issue 01 (2016-09-15)
1111
PRS
Performance Report Reference
29.1.4.1 GB over FR
Report Type
Simple Report
NE Type
2GBSC
Object Type
BC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
GB over
FR
GB Downlink BC
Utilization Rate (GB
over FR)
BC
Measuremen
t
GB Downlink BC
Overload Number
(GB over FR)
None
BC
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.1.4.2 GB over IP
Report Type
Simple Report
NE Type
2GBSC
Object Type
GBSC
Issue 01 (2016-09-15)
1112
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
GB over
IP
GB over IP NSVL
Mean Receive
Availability Rate
(GB over IP)
NSVL
Capability
Measuremen
t per BSC
GB over IP NSVL
Peak Receive
Availability Rate
(GB over IP)
NSVL
Capability
Measuremen
t per BSC
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.2 BTS
29.2.1 Abis Interface(IP over E1)
29.2.1.1 Abis MLPPP(IP over E1)
Report Type
Simple Report
NE Type
2GBSC
Object Type
BTS
Issue 01 (2016-09-15)
1113
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Abis
MLPPP(I
P over
E1)
Abis MLPPP
Forward Utilization
Rate (IP)
BTS
FlexAbis
Measuremen
t per BTS
Abis MLPPP
Backward
Utilization Rate (IP)
BTS
FlexAbis
Measuremen
t per BTS
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
PPP
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Abis
PPP(IP
over E1)
PPP Link
Measuremen
t
1114
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PPP Link
Measuremen
t
PPP Link
Measuremen
t
PPP Link
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
BTS
Issue 01 (2016-09-15)
1115
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Abis
Interface
User
Plane(IP
over
FE/GE,
no Logic
Port)
Abis Forward
Utilization Rate (IP)
BTS
FlexAbis
Measuremen
t per BTS
Abis Backward
Utilization Rate (IP)
BTS
FlexAbis
Measuremen
t per BTS
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
BTS
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Abis IP
Logic
Port(IP
over
FE/GE)
BTS
FlexAbis
Measuremen
t per BTS
1116
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BTS
FlexAbis
Measuremen
t per BTS
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
BTS
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Abis(TD
M)
Abis Timeslot
Utilization Rate
(TDM)
Utilization of
BTS
Timeslots
1117
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
29.3 Cell
29.3.1 Um(CS)
29.3.1.1 Um(CS)
Report Type
Simple Report
NE Type
2GBSC
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Um(CS)
TCH Traffic
Erl
KPI
Measuremen
t per Cell
TCHH Traffic
Erl
KPI
Measuremen
t per Cell
TCHF Traffic
Erl
KPI
Measuremen
t per Cell
Channel
Configuratio
n
Measuremen
t per Cell
1118
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Erl
KPI
Measuremen
t per Cell
TCH Availability
Rate per Cell
Channel
Configuratio
n
Measuremen
t per Cell
TCH Resource
Utilization Rate
KPI
Measuremen
t per Cell
TCH Congestion
Rate
KPI
Measuremen
t per Cell
SDCCH Traffic
Erl
KPI
Measuremen
t per Cell
SDCCH Resource
Utilization Rate
KPI
Measuremen
t per Cell
SDCCH Availability
Rate per Cell
Channel
Configuratio
n
Measuremen
t per Cell
SDCCH Congestion
Rate
KPI
Measuremen
t per Cell
RF Resource
Utilization Rate
Channel
State
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1119
PRS
Performance Report Reference
29.3.2 Um(PS)
29.3.2.1 Um(PS)
Report Type
Simple Report
NE Type
2GBSC
Object Type
GCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Um(PS)
Total RLC
Throughput
kB
Packet
Access
Capability
Measuremen
t
PS Resource
Utilization Rate
PDCH
Resource
Capability
Measuremen
t
PDCH Availability
Rate per Cell
Channel
Configuratio
n
Measuremen
t per Cell
Downlink PDCH
multiplexing Ratio
None
PDCH
Resource
Capability
Measuremen
t
BSC Reclaimed
Dynamic PDCH rate
PDCH
Resource
Capability
Measuremen
t
1120
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
PDCH Congestion
Rate
PDCH
Resource
Capability
Measuremen
t
GRPS RLC
Throughput
kB
Packet
Access
Capability
Measuremen
t
EGRPS RLC
Throughput
kB
Packet
Access
Capability
Measuremen
t
Average Throughput
of Uplink GPRS
RLC per Slot
kbit/s
Uplink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
Average Throughput
of Downlink GPRS
RLC per Slot
kbit/s
Downlink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
Average Throughput
of Uplink EGPRS
RLC per Slot
kbit/s
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
Average Throughput
of Downlink EGPRS
RLC per Slot
kbit/s
Downlink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
1121
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Uplink GPRS
LLC per User
kbit/s
Uplink LLC
Data
Transfer
Capability
Measuremen
t
Average Throughput
of Downlink GPRS
LLC per User
kbit/s
Downlink
LLC Data
Transfer
Capability
Measuremen
t
Average Throughput
of Uplink EGPRS
LLC per User
kbit/s
Uplink LLC
Data
Transfer
Capability
Measuremen
t
Average Throughput
of Downlink EGPRS
LLC per User
kbit/s
Downlink
LLC Data
Transfer
Capability
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Issue 01 (2016-09-15)
1122
PRS
Performance Report Reference
Object Type
SubSys
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
EGPU/
EXPU(C
P
Subsyste
m Detail
Report)
AR9725:Average
Subsys CPU Usage
of the Board
Subsystem
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
SubSys
Issue 01 (2016-09-15)
1123
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
EGPU/
EXPU(C
S UP
Subsyste
m Detail
Report)
AR9725:Average
Subsys CPU Usage
of the Board
Subsystem
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
2GBSC
Object Type
SubSys
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
EGPU/
EXPU(P
S UP
Subsyste
m Detail
Report)
AR9725:Average
Subsys CPU Usage
of the Board
Subsystem
Measuremen
t
1124
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1125
PRS
Performance Report Reference
30
Issue 01 (2016-09-15)
1126
PRS
Performance Report Reference
30.1 Cell
30.1.1 Code
30.1.1.1 Code
Report Type
Simple Report
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Code
R99 Code
Utilization Rate
RRC
Connection
Setup
Measuremen
t <per Cell>
Code Utilization
Rate
Multi-RAB
Service
Measuremen
t <per Cell>
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1127
PRS
Performance Report Reference
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSPDSC
H Code
HSPdsch Code
Utilization Rate
HSDPA
Measuremen
t <per Cell>
None
HSDPA
Measuremen
t <per Cell>
None
HSDPA
Measuremen
t <per Cell>
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Issue 01 (2016-09-15)
1128
PRS
Performance Report Reference
Object Type
UCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSSCC
H Code
HSSCCH Code
Utilization Rate
HSDPA
Measuremen
t <per Cell>
HSSCCH Code
Used Num
None
HSDPA
Measuremen
t <per Cell>
HS-SCCH Code
Number
None
Measuremen
t related to
RNCCell
Configuratio
n
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell
Issue 01 (2016-09-15)
1129
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
FACH
Channel
FACH Utilization
Rate
Paging
Measuremen
t <per Cell>
Number of Bytes on
Iub FACH
byte
Traffic
Measuremen
t <per Cell>
None
RRC Status
Measuremen
t <per Cell>
Paging
Measuremen
t <per Cell>
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell
Issue 01 (2016-09-15)
1130
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PCH
Channel
PCH Physical
Channel Utilization
Rate
Paging
Measuremen
t <per Cell>
Number of Paging
Messages
None
Paging
Measuremen
t <per Cell>
Number of Paging
Messages Discarded
Due to PCH
Congestion
None
Paging
Measuremen
t <per Cell>
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell
Issue 01 (2016-09-15)
1131
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RACH
Channel
RACH Utilization
Rate
Traffic
Measuremen
t <per Cell>
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.1.3 Power
30.1.3.1 RTWP
Report Type
Simple Report
NE Type
3GRNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RTWP
Power of Totally
Received Bandwidth
(Cell)
dBm
TX and RX
Power
Measuremen
t <per Cell>
1132
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.1.3.2 TCP
Report Type
Simple Report
NE Type
3GRNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCP
Total TCP
Utilization Rate
(Cell)
TX and RX
Power
Measuremen
t <per Cell>
NonHS TCP
Utilization Rate
(Cell)
TX and RX
Power
Measuremen
t <per Cell>
Mean Downlink
Throughput of single
HSDPA MAC-d
Flows
kbit/s
TX and RX
Power
Measuremen
t <per Cell>
1133
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.1.3.3 UL EUN
Report Type
Simple Report
NE Type
3GRNC
Object Type
UCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
UL EUN
UL EUN Utilization
Rate
Algorithm
Measuremen
t <per Cell>
UL total equivalent
user number
None
Algorithm
Measuremen
t <per Cell>
UL threshold of
other services
Algorithm
Measuremen
t <per Cell>
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1134
PRS
Performance Report Reference
NE Type
3GRNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
UCell
Traffic
Model
Report
None
RRC
Connection
Setup
Measuremen
t <per Cell>
None
RRC
Connection
Setup
Measuremen
t <per RNC>
numb
er
RRC Status
Measuremen
t <per Cell>
None
RRC Status
Measuremen
t <per Cell>
None
RRC Status
Measuremen
t <per Cell>
None
HSDPA
Measuremen
t <per Cell>
None
HSUPA
Measuremen
t <per Cell>
1135
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
AMR Traffic
Erl
RB
Procedure
Measuremen
t <per Cell>
None
CS RAB
Setup
Measuremen
t <per Cell>
SHO Times
Attempts
None
Soft
Handover
Measuremen
t <per Cell>
Factor of soft&softer
HO for call (CS
voice call + PS call)
None
Soft
Handover
Measuremen
t <per Cell>
PS RAB Times
None
PS RAB
Setup
Measuremen
t <per Cell>
DL PS Throughput
kbit/s
Traffic
Volume and
Data Rate
Measuremen
t <per Cell>
UL PS Throughput
kbit/s
Traffic
Volume and
Data Rate
Measuremen
t <per Cell>
None
PS RAB
Setup
Measuremen
t <per RNC>
HSDPA Throughput
kbit/s
HSDPA
Measuremen
t <per Cell>
None
PS RAB
Setup
Measuremen
t <per RNC>
1136
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA Throughput
kbit/s
HSUPA
Measuremen
t <per Cell>
Total PS Throughput
None
Traffic
Volume and
Data Rate
Measuremen
t <per Cell>
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
UCell
Traffic
Trend
Report
None
CS RAB
Setup
Measuremen
t <per Cell>
1137
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
AMR Traffic
Erl
RB
Procedure
Measuremen
t <per Cell>
PS RAB Times
None
PS RAB
Setup
Measuremen
t <per Cell>
DL PS Throughput
kbit/s
Traffic
Volume and
Data Rate
Measuremen
t <per Cell>
UL PS Throughput
kbit/s
Traffic
Volume and
Data Rate
Measuremen
t <per Cell>
Cell Connection
Number
None
RRC Status
Measuremen
t <per Cell>
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.2 NodeB
30.2.1 CE
30.2.1.1 CE Resource
Report Type
Simple Report
Issue 01 (2016-09-15)
1138
PRS
Performance Report Reference
NE Type
3GRNC
Object Type
RNC NodeB
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CE
Resource
DL License CE
Resource Utilization
Rate
Algorithm
Measuremen
t per NodeB
UL License CE
Resource Utilization
Rate
Algorithm
Measuremen
t per NodeB
DL NodeB Mean CE
Used Number
None
Algorithm
Measuremen
t <per Cell>
UL NodeB Mean CE
Used Number
None
Traffic
Measuremen
t <per RNC>
DL CE Capacity
Utilization Rate
Algorithm
Measuremen
t per NodeB
UL CE Capacity
Utilization Rate
Algorithm
Measuremen
t per NodeB
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.2.2 CNBAP
Issue 01 (2016-09-15)
1139
PRS
Performance Report Reference
30.2.2.1 CNBAP
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC NodeB
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CNBAP
IUB
measurement
s per NodeB
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC NodeB
Issue 01 (2016-09-15)
1140
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSPA
User
Number
Algorithm
Measuremen
t per NodeB
Algorithm
Measuremen
t per NodeB
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.2.4 Iub
30.2.4.1 Iub Signaling Plane(ATM)
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC NodeB
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Iub
Signaling
Plane(AT
M)
Algorithm
Measuremen
t per NodeB
1141
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Iub NCP
Throughput_UL
(ATM)
kbit/s
Algorithm
Measuremen
t per NodeB
Iub NCP
BandWidth_UL(AT
M)
kbit/s
Measuremen
t related to
RNCNodeB
Configuratio
n
Algorithm
Measuremen
t per NodeB
Iub NCP
Throughput_DL
(ATM)
kbit/s
Algorithm
Measuremen
t per NodeB
Iub NCP
BandWidth_DL(AT
M)
kbit/s
Measuremen
t related to
RNCNodeB
Configuratio
n
Algorithm
Measuremen
t per NodeB
Iub CCP
Throughput_UL
(ATM)
kbit/s
Algorithm
Measuremen
t per NodeB
Iub CCP
BandWidth_UL(AT
M)
kbit/s
Measuremen
t related to
RNCNodeB
Configuratio
n
Algorithm
Measuremen
t per NodeB
Iub CCP
Throughput_DL
(ATM)
kbit/s
Algorithm
Measuremen
t per NodeB
Iub CCP
BandWidth_DL(AT
M)
kbit/s
Measuremen
t related to
RNCNodeB
Configuratio
n
1142
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Iub ALCAP
BandWidth
Utilization Rate_UL
(ATM)
Algorithm
Measuremen
t per NodeB
Iub ALCAP
Throughput_UL
(ATM)
kbit/s
Algorithm
Measuremen
t per NodeB
Iub ALCAP
BandWidth_UL(AT
M)
kbit/s
Measuremen
t related to
RNCNodeB
Configuratio
n
Iub ALCAP
BandWidth
Utilization Rate_DL
(ATM)
Algorithm
Measuremen
t per NodeB
Iub ALCAP
Throughput_DL
(ATM)
kbit/s
Algorithm
Measuremen
t per NodeB
Iub ALCAP
BandWidth_DL(AT
M)
kbit/s
Measuremen
t related to
RNCNodeB
Configuratio
n
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Issue 01 (2016-09-15)
1143
PRS
Performance Report Reference
Object Type
RNC NodeB
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Iub
Signaling
Plane(IP)
Iub NCP
Throughput_UL (IP)
kbit/s
Algorithm
Measuremen
t per NodeB
Iub NCP
Throughput_DL (IP)
kbit/s
Algorithm
Measuremen
t per NodeB
Iub CCP
Throughput_UL (IP)
kbit/s
Algorithm
Measuremen
t per NodeB
Iub CCP
Throughput_DL (IP)
kbit/s
Algorithm
Measuremen
t per NodeB
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC NodeB
Issue 01 (2016-09-15)
1144
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Iub User
Plane(AT
M)
Algorithm
Measuremen
t per NodeB
kbit/s
Algorithm
Measuremen
t per NodeB
kbit/s
Algorithm
Measuremen
t per NodeB
kbit/s
Measuremen
t related to
RNCNodeB
Configuratio
n
Algorithm
Measuremen
t per NodeB
kbit/s
Algorithm
Measuremen
t per NodeB
kbit/s
Algorithm
Measuremen
t per NodeB
kbit/s
Measuremen
t related to
RNCNodeB
Configuratio
n
Algorithm
Measuremen
t per NodeB
kbit/s
Algorithm
Measuremen
t per NodeB
1145
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Algorithm
Measuremen
t per NodeB
kbit/s
Algorithm
Measuremen
t per NodeB
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC NodeB
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Iub User
Plane(IP)
Algorithm
Measuremen
t per NodeB
1146
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
kbit/s
Algorithm
Measuremen
t per NodeB
kbit/s
Algorithm
Measuremen
t per NodeB
kbit/s
Measuremen
t related to
RNCNodeB
Configuratio
n
Algorithm
Measuremen
t per NodeB
kbit/s
Algorithm
Measuremen
t per NodeB
kbit/s
Algorithm
Measuremen
t per NodeB
kbit/s
Measuremen
t related to
RNCNodeB
Configuratio
n
Algorithm
Measuremen
t per NodeB
kbit/s
Algorithm
Measuremen
t per NodeB
Algorithm
Measuremen
t per NodeB
1147
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
kbit/s
Algorithm
Measuremen
t per NodeB
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC NodeB
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Iub User
Plane(IP
POOL)
kbit/s
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
1148
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
kbit/s
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Issue 01 (2016-09-15)
1149
PRS
Performance Report Reference
NE Type
3GBTS
Object Type
NodeB Board
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Board
Board Load
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC NodeB
Issue 01 (2016-09-15)
1150
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
NodeB
License
NodeB HS-PDSCH
Code License
Utilization Rate
HSDPA
Measuremen
ts per Local
Cell
NodeB CNBAP
License Utilization
Rate
NodeB
NBAP
procedure
measurement
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC NodeB
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
NodeB
Traffic
Model
Report
None
RRC
Connection
Setup
Measuremen
t <per Cell>
1151
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
None
RRC
Connection
Setup
Measuremen
t <per RNC>
numb
er
RRC Status
Measuremen
t <per Cell>
None
RRC Status
Measuremen
t <per Cell>
None
RRC Status
Measuremen
t <per Cell>
None
HSDPA
Measuremen
t <per Cell>
None
HSUPA
Measuremen
t <per Cell>
AMR Traffic
Erl
RB
Procedure
Measuremen
t <per Cell>
None
CS RAB
Setup
Measuremen
t <per Cell>
SHO Times
Attempts
None
Soft
Handover
Measuremen
t <per Cell>
Factor of soft&softer
HO for call (CS
voice call + PS call)
None
Soft
Handover
Measuremen
t <per Cell>
PS RAB Times
None
PS RAB
Setup
Measuremen
t <per Cell>
1152
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DL PS Throughput
kbit/s
Traffic
Volume and
Data Rate
Measuremen
t <per Cell>
UL PS Throughput
kbit/s
Traffic
Volume and
Data Rate
Measuremen
t <per Cell>
None
PS RAB
Setup
Measuremen
t <per RNC>
HSDPA Throughput
kbit/s
HSDPA
Measuremen
t <per Cell>
None
PS RAB
Setup
Measuremen
t <per RNC>
HSUPA Throughput
kbit/s
HSUPA
Measuremen
t <per Cell>
Total PS Throughput
None
Traffic
Volume and
Data Rate
Measuremen
t <per Cell>
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1153
PRS
Performance Report Reference
NE Type
3GRNC
Object Type
RNC NodeB
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
NodeB
Traffic
Trend
Report
None
CS RAB
Setup
Measuremen
t <per Cell>
AMR Traffic
Erl
RB
Procedure
Measuremen
t <per Cell>
PS RAB Times
None
PS RAB
Setup
Measuremen
t <per Cell>
DL PS Throughput
kbit/s
Traffic
Volume and
Data Rate
Measuremen
t <per Cell>
UL PS Throughput
kbit/s
Traffic
Volume and
Data Rate
Measuremen
t <per Cell>
NodeB CNBAP
consumption
None
NodeB
NBAP
procedure
measurement
1154
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3 RNC
30.3.1 Board
30.3.1.1 DPU(BSC6900UMTS)
Report Type
Simple Report
NE Type
3GRNC
Object Type
3G DSP
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DPU
DSP
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1155
PRS
Performance Report Reference
30.3.1.2 EGPU(CP)(BSC6910UMTS)
Report Type
Simple Report
NE Type
3GRNC
Object Type
SubSys Virtual Group
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
EGPU(C
P)
EGPU Board CP
CPU Utilization
Rate (Mean)_UMTS
Subsystem
Measuremen
t
EGPU Board CP
Subsystem
Number_UMTS
None
Measuremen
t related to
EGPU
Subsystem
Configuratio
n
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3.1.3 EGPU(UP)(BSC6910UMTS)
Report Type
Simple Report
NE Type
3GRNC
Issue 01 (2016-09-15)
1156
PRS
Performance Report Reference
Object Type
SubSys Virtual Group
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
EGPU(U
P)
EGPU Board UP
CPU Utilization
Rate (Mean)_UMTS
Subsystem
Measuremen
t
EGPU Board UP
Subsystem
Number_UMTS
None
Measuremen
t related to
EGPU
Subsystem
Configuratio
n
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3.1.4 INT(BSC6900UMTS)
Report Type
Simple Report
NE Type
3GRNC
Object Type
Board
Issue 01 (2016-09-15)
1157
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
INT
Interface
Board
Subsystem
Measuremen
t
Interface
Board
Subsystem
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
CPU
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
INT(Sign
aling
Plane)
CPU
Measuremen
t
1158
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
Board
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
INT(Use
r Plane)
Interface
Board
Subsystem
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3.1.7 MPU(BSC6900UMTS)
Report Type
Simple Report
Issue 01 (2016-09-15)
1159
PRS
Performance Report Reference
NE Type
3GRNC
Object Type
Board
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
MPU
XPU
Subsystem
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3.1.8 RMP(BSC6910UMTS)
Report Type
Simple Report
NE Type
3GRNC
Object Type
CPU
Issue 01 (2016-09-15)
1160
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RMP
CPU
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3.1.9 SCU(BSC6900UMTS)
Report Type
Simple Report
NE Type
3GRNC
Object Type
Board
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SCU
SCU
Subsystem
Measuremen
t
1161
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3.1.10 SCU(BSC6910UMTS)
Report Type
Simple Report
NE Type
3GRNC
Object Type
CPU
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SCU
CPU
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1162
PRS
Performance Report Reference
NE Type
3GRNC
Object Type
Inter-Subrack Traffic Object
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SCU Tx
Ability
InterSubrack
Traffic
Measuremen
t
kbit/s
InterSubrack
Traffic
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
Inter-Subrack Traffic Object
Issue 01 (2016-09-15)
1163
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SCU Tx
Ability
InterSubrack
Traffic
Measuremen
t
kbit/s
InterSubrack
Traffic
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3.1.13 SPU(BSC6900UMTS)
Report Type
Simple Report
NE Type
3GRNC
Object Type
Board
Issue 01 (2016-09-15)
1164
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SPU
XPU
Subsystem
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3.2 Iu-CS
30.3.2.1 IuCS Signaling Plane(ATM)
Report Type
Simple Report
NE Type
3GRNC
Object Type
MTP3B DSP
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
IuCS
Signaling
Plane(AT
M)
IuCS Signaling
Plane Utilization
Rate_DL (ATM)
MTP3 DSP
Measuremen
t
1165
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
IuCS Signaling
Plane
Throughput_DL
(ATM)
kbit/s
MTP3 DSP
Measuremen
t
IuCS Signaling
Plane
BandWidth_DL(AT
M)
kbit/s
Measuremen
t related to
N7DPC
Configuratio
n
IuCS Signaling
Plane Utilization
Rate_UL (ATM)
MTP3 DSP
Measuremen
t
IuCS Signaling
Plane
Throughput_UL
(ATM)
kbit/s
MTP3 DSP
Measuremen
t
IuCS Signaling
Plane
BandWidth_UL(AT
M)
kbit/s
Measuremen
t related to
N7DPC
Configuratio
n
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
MTP3B DSP
Issue 01 (2016-09-15)
1166
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
IuCS
Signaling
Plane(IP)
IuCS Signaling
Plane
Throughput_DL (IP)
kbit/s
MTP3 DSP
Measuremen
t
IuCS Signaling
Plane
Throughput_UL (IP)
kbit/s
MTP3 DSP
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
QAAL2 Node
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
IuCS
User
Plane(AT
M)
QAAL2
Measuremen
t
kbit/s
QAAL2
Measuremen
t
1167
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
kbit/s
Measuremen
t related to
ADJNODE
Configuratio
n
QAAL2
Measuremen
t
kbit/s
QAAL2
Measuremen
t
kbit/s
Measuremen
t related to
ADJNODE
Configuratio
n
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
QAAL2 Node
Issue 01 (2016-09-15)
1168
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
IuCS
User
Plane(IP)
QAAL2
Measuremen
t
kbit/s
QAAL2
Measuremen
t
kbit/s
Measuremen
t related to
ADJNODE
Configuratio
n
QAAL2
Measuremen
t
kbit/s
QAAL2
Measuremen
t
kbit/s
Measuremen
t related to
ADJNODE
Configuratio
n
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Issue 01 (2016-09-15)
1169
PRS
Performance Report Reference
Object Type
QAAL2 Node
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
IuCS
User
Plane(IP
POOL)
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
kbit/s
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
kbit/s
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
kbit/s
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
1170
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
kbit/s
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3.3 Iu-PS
30.3.3.1 IuPS Signaling Plane(ATM)
Report Type
Simple Report
NE Type
3GRNC
Object Type
MTP3B DSP
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
IuPS
Signaling
Plane(AT
M)
IuPS Signaling
Plane Utilization
Rate_UL (ATM)
MTP3 DSP
Measuremen
t
1171
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
IuPS Signaling
Plane
Throughput_UL
(ATM)
kbit/s
MTP3 DSP
Measuremen
t
IuPS Signaling
Plane
BandWidth_UL(AT
M)
kbit/s
Measuremen
t related to
N7DPC
Configuratio
n
IuPS Signaling
Plane Utilization
Rate_DL (ATM)
MTP3 DSP
Measuremen
t
IuPS Signaling
Plane
Throughput_DL
(ATM)
kbit/s
MTP3 DSP
Measuremen
t
IuPS Signaling
Plane
BandWidth_DL(AT
M)
kbit/s
Measuremen
t related to
N7DPC
Configuratio
n
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
MTP3B DSP
Issue 01 (2016-09-15)
1172
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
IuPS
Signaling
Plane(IP)
IuPS Signaling
Plane
Throughput_DL (IP)
kbit/s
MTP3 DSP
Measuremen
t
IuPS Signaling
Plane
Throughput_UL (IP)
kbit/s
MTP3 DSP
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
QAAL2 Node
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
IuPS
User
Plane(AT
M)
QAAL2
Measuremen
t
kbit/s
QAAL2
Measuremen
t
1173
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
kbit/s
QAAL2
Measuremen
t
QAAL2
Measuremen
t
kbit/s
QAAL2
Measuremen
t
kbit/s
QAAL2
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
QAAL2 Node
Issue 01 (2016-09-15)
1174
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
IuPS
User
Plane(IP)
QAAL2
Measuremen
t
kbit/s
QAAL2
Measuremen
t
kbit/s
Measuremen
t related to
ADJNODE
Configuratio
n
QAAL2
Measuremen
t
kbit/s
QAAL2
Measuremen
t
kbit/s
Measuremen
t related to
ADJNODE
Configuratio
n
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Issue 01 (2016-09-15)
1175
PRS
Performance Report Reference
Object Type
QAAL2 Node
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
IuPS
User
Plane(IP
POOL)
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
kbit/s
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
kbit/s
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
kbit/s
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
1176
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
kbit/s
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3.4 Iur
30.3.4.1 Iur Signaling Plane(ATM)
Report Type
Simple Report
NE Type
3GRNC
Object Type
MTP3B DSP
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Iur
Signaling
Plane(AT
M)
MTP3 DSP
Measuremen
t
1177
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
kbit/s
MTP3 DSP
Measuremen
t
kbit/s
Measuremen
t related to
N7DPC
Configuratio
n
MTP3 DSP
Measuremen
t
kbit/s
MTP3 DSP
Measuremen
t
kbit/s
Measuremen
t related to
N7DPC
Configuratio
n
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
MTP3B DSP
Issue 01 (2016-09-15)
1178
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Iur
Signaling
Plane(IP)
kbit/s
MTP3 DSP
Measuremen
t
kbit/s
MTP3 DSP
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
QAAL2 Node
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Iur User
Plane(AT
M)
QAAL2
Measuremen
t
kbit/s
QAAL2
Measuremen
t
1179
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
kbit/s
Measuremen
t related to
ADJNODE
Configuratio
n
QAAL2
Measuremen
t
kbit/s
QAAL2
Measuremen
t
kbit/s
Measuremen
t related to
ADJNODE
Configuratio
n
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
QAAL2 Node
Issue 01 (2016-09-15)
1180
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Iur User
Plane(IP)
QAAL2
Measuremen
t
kbit/s
QAAL2
Measuremen
t
kbit/s
Measuremen
t related to
ADJNODE
Configuratio
n
QAAL2
Measuremen
t
kbit/s
QAAL2
Measuremen
t
kbit/s
Measuremen
t related to
ADJNODE
Configuratio
n
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Issue 01 (2016-09-15)
1181
PRS
Performance Report Reference
Object Type
QAAL2 Node
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Iur User
Plane(IP
POOL)
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
kbit/s
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
kbit/s
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
kbit/s
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
1182
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
kbit/s
Transmission
Resource
Pool
Adjacent
Node UserPlane Traffic
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
30.3.5 License
30.3.5.1 RNC License_Active User(BSC6910UMTS)
Report Type
Simple Report
NE Type
3GRNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RNC
License_
Active
User
RRC Status
Measuremen
t <per RNC>
1183
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RNC
License_
Active
User
PS Active User
License Utilization
Rate
Traffic
Measuremen
t per PLMN
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1184
PRS
Performance Report Reference
NE Type
3GRNC
Object Type
RNC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RNC
License_
Hardwar
e
Capacity
RNC Hardware
Capacity License
Utilization
Rate_BSC6910
Traffic
Measuremen
t <per RNC>
RNC ENIUa
License Utilization
Rate
Traffic
Measuremen
t <per RNC>
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC
Issue 01 (2016-09-15)
1185
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RNC
License_
Hardwar
e
Capacity
RNC Hardware
Capacity License
Utilization
Rate_BSC6900
Traffic
Measuremen
t <per RNC>
Traffic
Measuremen
t <per RNC>
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RNC
License_
HSPA
User
Number
HSDPA
Measuremen
t <per Cell>
1186
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA
Measuremen
t <per Cell>
32 HSDPA Users
per Cell License
Allocated
Throughput
Utilization Rate
Traffic
Measuremen
t <per RNC>
64 HSDPA Users
per Cell License
Allocated
Throughput
Utilization Rate
Traffic
Measuremen
t <per RNC>
96 HSDPA Users
per Cell License
Allocated
Throughput
Utilization Rate
Traffic
Measuremen
t <per RNC>
Traffic
Measuremen
t <per RNC>
60 HSUPA Users
per Cell License
Allocated
Throughput
Utilization Rate
Traffic
Measuremen
t <per RNC>
96 HSUPA Users
per Cell License
Allocated
Throughput
Utilization Rate
Traffic
Measuremen
t <per RNC>
Traffic
Measuremen
t <per RNC>
Traffic
Measuremen
t <per RNC>
1187
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
Measuremen
t <per RNC>
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RNC
License_
HSPA
User
Number
HSDPA
Measuremen
t <per Cell>
HSUPA
Measuremen
t <per Cell>
1188
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
32 HSDPA Users
per Cell License
Allocated
Throughput
Utilization Rate
Traffic
Measuremen
t <per RNC>
64 HSDPA Users
per Cell License
Allocated
Throughput
Utilization Rate
Traffic
Measuremen
t <per RNC>
96 HSDPA Users
per Cell License
Allocated
Throughput
Utilization Rate
Traffic
Measuremen
t <per RNC>
Traffic
Measuremen
t <per RNC>
60 HSUPA Users
per Cell License
Allocated
Throughput
Utilization Rate
Traffic
Measuremen
t <per RNC>
96 HSUPA Users
per Cell License
Allocated
Throughput
Utilization Rate
Traffic
Measuremen
t <per RNC>
Traffic
Measuremen
t <per RNC>
Traffic
Measuremen
t <per RNC>
1189
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
Measuremen
t <per RNC>
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RNC
License_
Traffic
CS License Ratio
Traffic
Measuremen
t <per RNC>
PS R99 Throughput
Ratio
Traffic
Measuremen
t <per RNC>
HSDPA Throughput
Ratio
Traffic
Measuremen
t <per RNC>
1190
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA Throughput
Ratio
Traffic
Measuremen
t <per RNC>
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RNC
License_
Traffic
CS License Ratio
Traffic
Measuremen
t <per RNC>
PS R99 Throughput
Ratio
Traffic
Measuremen
t <per RNC>
HSDPA Throughput
Ratio
Traffic
Measuremen
t <per RNC>
1191
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA Throughput
Ratio
Traffic
Measuremen
t <per RNC>
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
CNOPERATOR
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RNC
License_
Traffic(R
AN
Sharing
or
MOCN)
CS License Ratio
(RAN Sharing or
MOCN)
Traffic
Measuremen
t per PLMN
PS R99 Throughput
Ratio (RAN Sharing
or MOCN)
Traffic
Measuremen
t per PLMN
HSDPA Throughput
Ratio (RAN Sharing
or MOCN)
Traffic
Measuremen
t per PLMN
1192
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA Throughput
Ratio (RAN Sharing
or MOCN)
Traffic
Measuremen
t per PLMN
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
CNOPERATOR
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RNC
License_
Traffic(R
AN
Sharing
or
MOCN)
CS License Ratio
(RAN Sharing or
MOCN)
Traffic
Measuremen
t per PLMN
PS R99 Throughput
Ratio (RAN Sharing
or MOCN)
Traffic
Measuremen
t per PLMN
HSDPA Throughput
Ratio (RAN Sharing
or MOCN)
Traffic
Measuremen
t per PLMN
1193
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA Throughput
Ratio (RAN Sharing
or MOCN)
Traffic
Measuremen
t per PLMN
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RNC
Traffic
Model
Report
User Number
None
Traffic
Measuremen
t <per RNC>
Erl
Traffic
Measuremen
t <per RNC>
None
CS RAB
Setup
Measuremen
t <per RNC>
1194
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Erl
RB
Procedure
Measuremen
t <per RNC>
None
RB
Procedure
Measuremen
t <per RNC>
None
RB
Procedure
Measuremen
t <per RNC>
SHO Times
Attempts per User
None
Soft
Handover
Measuremen
t <per RNC>
Factor of
Soft&Softer HO for
Call (CS Voice Call
+ PS Call)
None
Soft
Handover
Measuremen
t <per RNC>
None
PS RAB
Setup
Measuremen
t <per RNC>
Total PS Throughput
per User
kbit/s
Traffic
Measuremen
t <per RNC>
DL PS Throughput
per User
kbit/s
Traffic
Measuremen
t <per RNC>
DL R99 PS
Throughput per User
kbit/s
Traffic
Measuremen
t <per RNC>
UL PS Throughput
per User
kbit/s
Traffic
Measuremen
t <per RNC>
UL R99 PS
Throughput per User
kbit/s
Traffic
Measuremen
t <per RNC>
1195
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Ratio of DL PS
Throughput vs UL
PS Throughput
None
Traffic
Measuremen
t <per RNC>
None
RRC
Connection
Setup
Measuremen
t <per RNC>
PS Channel Switch
Times per User
None
RB
Procedure
Measuremen
t <per RNC>
PS RAB Number
Mean
None
PS RAB
Setup
Measuremen
t <per RNC>
None
RRC
Connection
Setup
Measuremen
t <per RNC>
Ratio of HSDPA
Traffic vs DL PS
PS RAB
Setup
Measuremen
t <per RNC>
None
RRC
Connection
Setup
Measuremen
t <per RNC>
Ratio of HSUPA
Traffic vs UL PS
PS RAB
Setup
Measuremen
t <per RNC>
Number of UEs in
CELL_DCH State
None
RRC Status
Measuremen
t <per RNC>
Number of UEs in
CELL_FACH State
None
RRC Status
Measuremen
t <per RNC>
1196
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of UEs in
CELL_PCH State
None
RRC Status
Measuremen
t <per RNC>
Number of UEs in
URA_PCH State
None
RRC Status
Measuremen
t <per RNC>
EGPU Board CP
CPU Utilization
Rate (Mean)
Sum_UMTS
kbit/s
Subsystem
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RNC
Traffic
Model
Report
User Number
None
Traffic
Measuremen
t <per RNC>
1197
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Erl
Traffic
Measuremen
t <per RNC>
None
CS RAB
Setup
Measuremen
t <per RNC>
Erl
RB
Procedure
Measuremen
t <per RNC>
None
RB
Procedure
Measuremen
t <per RNC>
None
RB
Procedure
Measuremen
t <per RNC>
SHO Times
Attempts per User
None
Soft
Handover
Measuremen
t <per RNC>
Factor of
Soft&Softer HO for
Call (CS Voice Call
+ PS Call)
None
Soft
Handover
Measuremen
t <per RNC>
None
PS RAB
Setup
Measuremen
t <per RNC>
Total PS Throughput
per User
kbit/s
Traffic
Measuremen
t <per RNC>
DL PS Throughput
per User
kbit/s
Traffic
Measuremen
t <per RNC>
DL R99 PS
Throughput per User
kbit/s
Traffic
Measuremen
t <per RNC>
1198
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
UL PS Throughput
per User
kbit/s
Traffic
Measuremen
t <per RNC>
UL R99 PS
Throughput per User
kbit/s
Traffic
Measuremen
t <per RNC>
Ratio of DL PS
Throughput vs UL
PS Throughput
None
Traffic
Measuremen
t <per RNC>
None
RRC
Connection
Setup
Measuremen
t <per RNC>
PS Channel Switch
Times per User
None
RB
Procedure
Measuremen
t <per RNC>
PS RAB Number
Mean
None
PS RAB
Setup
Measuremen
t <per RNC>
None
RRC
Connection
Setup
Measuremen
t <per RNC>
Ratio of HSDPA
Traffic vs DL PS
PS RAB
Setup
Measuremen
t <per RNC>
None
RRC
Connection
Setup
Measuremen
t <per RNC>
Ratio of HSUPA
Traffic vs UL PS
PS RAB
Setup
Measuremen
t <per RNC>
1199
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of UEs in
CELL_DCH State
None
RRC Status
Measuremen
t <per RNC>
Number of UEs in
CELL_FACH State
None
RRC Status
Measuremen
t <per RNC>
Number of UEs in
CELL_PCH State
None
RRC Status
Measuremen
t <per RNC>
Number of UEs in
URA_PCH State
None
RRC Status
Measuremen
t <per RNC>
VS.XPU.CPULOA
D.MEAN
XPU
Subsystem
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC
Issue 01 (2016-09-15)
1200
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RNC
Traffic
Trend
Report
None
CS RAB
Setup
Measuremen
t <per RNC>
AMR Traffic
Erl
Traffic
Measuremen
t <per RNC>
PS RAB Times
None
PS RAB
Setup
Measuremen
t <per RNC>
DL PS Throughput
kbit/s
Traffic
Measuremen
t <per RNC>
UL PS Throughput
kbit/s
Traffic
Measuremen
t <per RNC>
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC
Issue 01 (2016-09-15)
1201
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RNC
Traffic
Trend
Report
None
CS RAB
Setup
Measuremen
t <per RNC>
AMR Traffic
Erl
Traffic
Measuremen
t <per RNC>
PS RAB Times
None
PS RAB
Setup
Measuremen
t <per RNC>
DL PS Throughput
kbit/s
Traffic
Measuremen
t <per RNC>
UL PS Throughput
kbit/s
Traffic
Measuremen
t <per RNC>
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell Group
Issue 01 (2016-09-15)
1202
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
UCell
Group
Traffic
Trend
Report
None
CS RAB
Setup
Measuremen
t <per Cell>
AMR Traffic
Erl
RB
Procedure
Measuremen
t <per Cell>
PS RAB Times
None
PS RAB
Setup
Measuremen
t <per Cell>
DL PS Throughput
kbit/s
Traffic
Volume and
Data Rate
Measuremen
t <per Cell>
UL PS Throughput
kbit/s
Traffic
Volume and
Data Rate
Measuremen
t <per Cell>
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Issue 01 (2016-09-15)
1203
PRS
Performance Report Reference
Object Type
Frame
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DPU
DSP
Utilizatio
n Rate of
one
Physical
Subrack
Measuremen
t related to
RNC Frame
Configuratio
n
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC
Issue 01 (2016-09-15)
1204
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DPU
DSP
Utilizatio
n Rate of
RNC
Traffic
Measuremen
t <per RNC>
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
SubSys
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
EGPU(C
P
Subsyste
m Detail
Report)
AR9725:Average
Subsys CPU Usage
of the Board
Subsystem
Measuremen
t
1205
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
SubSys
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
EGPU(U
P
Subsyste
m Detail
Report)
AR9725:Average
Subsys CPU Usage
of the Board
Subsystem
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1206
PRS
Performance Report Reference
NE Type
3GRNC
Object Type
RNC
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Calculate
EGPU
CP CPU
utilizatio
n
AR9725:Average
Subsys CPU Usage
of the Board
Subsystem
Measuremen
t
Detailed
Signaling
split
None
CS RAB
Setup
Measuremen
t <per Cell>
PS Call (R99)
None
PS RAB
Setup
Measuremen
t <per Cell>
PS Call (HSPA)
None
PS RAB
Setup
Measuremen
t <per Cell>
NAS RRC
None
CS RAB
Setup
Measuremen
t <per Cell>
Soft Handover
Addition
None
Hard
Handover
Measuremen
t <per RNC>
1207
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Soft Handover
Deletion
None
Hard
Handover
Measuremen
t <per RNC>
Soft Handover
Addition+Service
Cell Update
None
HSDPA
Measuremen
t <per Cell>
Softer Handover
Addition
None
Soft
Handover
Measuremen
t <per Cell>
Softer Handover
Deletion
None
Soft
Handover
Measuremen
t <per Cell>
Hard Handover
None
Hard
Handover
Measuremen
t <per RNC>
CS Inter-RAT
handover
None
CS InterRAT
Handover
Measuremen
t <per RNC>
PS Inter-RAT
handover
None
PS InterRAT
Handover
Measuremen
t <per RNC>
SRNS Relocation
intra domain
None
SRNC
Relocation
Measuremen
t
Iu Paging
None
Paging
Measuremen
t <per RNC>
None
Cell Update
Measuremen
t <per Cell>
1208
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Cell update
None
Cell Update
Measuremen
t <per Cell>
DCCC&LDR&STA
TE TRANS
None
RB
Procedure
Measuremen
t <per Cell>
Compress Mode
None
Compressed
Mode
Measuremen
t <per Cell>
DPB
None
Soft
Handover
Measuremen
t <per RNC>
DRNC RL SETUP
None
DRNC
Measuremen
t per Iur
Interface
DRNC RL RECFG
None
DRNC
Measuremen
t per Iur
Interface
DRNC RL ADD
None
DRNC
Measuremen
t per Iur
Interface
DRNC RL DEL
None
DRNC
Measuremen
t per Iur
Interface
CodeAdj
None
Algorithm
Measuremen
t <per Cell>
LCS (A-GPS)
None
LCS Service
Measuremen
t <per RNC>
None
LCS Service
Measuremen
t <per RNC>
1209
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
MPU
CPU
Utilizatio
n Rate of
RNC
Average MPU
Subsystem CPU
Utilization Rate of
RNC
Traffic
Measuremen
t <per RNC>
Max MPU
Subsystem CPU
Utilization Rate of
RNC
Traffic
Measuremen
t <per RNC>
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1210
PRS
Performance Report Reference
NE Type
3GRNC
Object Type
FEGE
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Port
traffic
analysis
T7121:Highest
Receive Rate of the
FEGE Ethernet Port
kbit/s
FE/GE
Ethernet Port
Measuremen
t
T7123:Mean
Receive Rate of the
FEGE Ethernet Port
kbit/s
FE/GE
Ethernet Port
Measuremen
t
T7126:Highest
Transmit Rate of the
FEGE Ethernet Port
kbit/s
FE/GE
Ethernet Port
Measuremen
t
T7128:Mean
Transmit Rate of the
FEGE Ethernet Port
kbit/s
FE/GE
Ethernet Port
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1211
PRS
Performance Report Reference
NE Type
3GRNC
Object Type
UCell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RTWP
Breakdo
wn
UL Background
Noise
dBm
Algorithm
Measuremen
t 2 <per
Cell>
Power of Totally
Received Bandwidth
(Cell)
dBm
TX and RX
Power
Measuremen
t <per Cell>
UL Total Load
Measuremen
t of locell
power
DPCCH UL Power
Load of R99
Measuremen
t of locell
power
DPCCH UL Power
Load of HSUPA
10ms
Measuremen
t of locell
power
DPCCH UL Power
Load of HSUPA
2ms
Measuremen
t of locell
power
DPDCH UL Power
Load of R99
Measuremen
t of locell
power
1212
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPCCH UL
Power Load of
HSDPA (CQI)
Measuremen
t of locell
power
EDPCCH UL Power
Load of HSUPA
10ms
Measuremen
t of locell
power
EDPCCH UL Power
Load of HSUPA
2ms
Measuremen
t of locell
power
EDPDCH UL Power
Load of HSUPA
10ms
Measuremen
t of locell
power
EDPDCH UL Power
Load of HSUPA
2ms
Measuremen
t of locell
power
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
RNC
Issue 01 (2016-09-15)
1213
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Calculate
CPU
utilizatio
n
XPU
Subsystem
Measuremen
t
Detailed
Signaling
split
None
CS RAB
Setup
Measuremen
t <per Cell>
PS Call (R99)
None
PS RAB
Setup
Measuremen
t <per Cell>
PS Call (HSPA)
None
PS RAB
Setup
Measuremen
t <per Cell>
NAS RRC
None
CS RAB
Setup
Measuremen
t <per Cell>
Soft Handover
Addition
None
Hard
Handover
Measuremen
t <per RNC>
Soft Handover
Deletion
None
Hard
Handover
Measuremen
t <per RNC>
Soft Handover
Addition+Service
Cell Update
None
HSDPA
Measuremen
t <per Cell>
Softer Handover
Addition
None
Soft
Handover
Measuremen
t <per Cell>
Softer Handover
Deletion
None
Soft
Handover
Measuremen
t <per Cell>
1214
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
Hard Handover
None
Hard
Handover
Measuremen
t <per RNC>
CS Inter-RAT
handover
None
CS InterRAT
Handover
Measuremen
t <per RNC>
PS Inter-RAT
handover
None
PS InterRAT
Handover
Measuremen
t <per RNC>
SRNS Relocation
intra domain
None
SRNC
Relocation
Measuremen
t
Iu Paging
None
Paging
Measuremen
t <per RNC>
None
Cell Update
Measuremen
t <per Cell>
Cell update
None
Cell Update
Measuremen
t <per Cell>
DCCC&LDR&STA
TE TRANS
None
RB
Procedure
Measuremen
t <per Cell>
Compress Mode
None
Compressed
Mode
Measuremen
t <per Cell>
DPB
None
Soft
Handover
Measuremen
t <per RNC>
1215
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DRNC RL SETUP
None
DRNC
Measuremen
t per Iur
Interface
DRNC RL RECFG
None
DRNC
Measuremen
t per Iur
Interface
DRNC RL ADD
None
DRNC
Measuremen
t per Iur
Interface
DRNC RL DEL
None
DRNC
Measuremen
t per Iur
Interface
CodeAdj
None
Algorithm
Measuremen
t <per Cell>
LCS (A-GPS)
None
LCS Service
Measuremen
t <per RNC>
None
LCS Service
Measuremen
t <per RNC>
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1216
PRS
Performance Report Reference
NE Type
3GRNC
Object Type
RNC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SPU
CPU
Utilizatio
n Rate of
RNC
Average SPU
Subsystem CPU
Utilization Rate of
RNC
Traffic
Measuremen
t <per RNC>
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
3GRNC
Object Type
UCell
Issue 01 (2016-09-15)
1217
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCP
Breakdo
wn
VS.MeanTCP.NonH
S
dBm
TX and RX
Power
Measuremen
t <per Cell>
Common Channel
Power
TX and RX
Power
Measuremen
t <per Cell>
DL Power Ratio of
SF256
Measuremen
t of locell
power
DL Power Ratio of
SF128
Measuremen
t of locell
power
DL Power Ratio of
SF64
Measuremen
t of locell
power
DL Power Ratio of
SF32
Measuremen
t of locell
power
DL Power Ratio of
SF16
Measuremen
t of locell
power
DL Power Ratio of
SF8
Measuremen
t of locell
power
TX and RX
Power
Measuremen
t <per Cell>
Remaining Power
Ratio
TX and RX
Power
Measuremen
t <per Cell>
1218
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1219
PRS
Performance Report Reference
31
Issue 01 (2016-09-15)
1220
PRS
Performance Report Reference
31.1 eNodeB
31.1.1 Board
31.1.1.1 BBP
Report Type
Simple Report
NE Type
4GBTS
Object Type
BBU Board
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BBP
BBU Board
Load
Measuremen
t
BBU Board
Load
Measuremen
t
Times of eNodeB
BBP CPU MAX
Utilization Rate
exceeds threshold
times
BBU Board
Load
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1221
PRS
Performance Report Reference
31.1.1.2 MPT
Report Type
Simple Report
NE Type
4GBTS
Object Type
BBU Board
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
MPT
BBU Board
Load
Measuremen
t
BBU Board
Load
Measuremen
t
Times of eNodeB
MPT CPU MAX
Utilization Rate
exceeds threshold
times
BBU Board
Load
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
Issue 01 (2016-09-15)
1222
PRS
Performance Report Reference
NE Type
4GBTS
Object Type
eNodeB
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RRCconnecte
d User
License
RRC-connected
User License Usage
Measuremen
t related to
the user
traffic in
eNodeB for
the operator
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
4GBTS
Object Type
eNodeB Operator
Issue 01 (2016-09-15)
1223
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RRCconnecte
d User
License_
MOCN
RRC-connected
User License
Usage_MOCN
Measuremen
t related to
the user
traffic in
eNodeB for
the operator
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
31.1.3 RscGroup
31.1.3.1 RscGroup droppkt Ratio
Report Type
Simple Report
NE Type
4GBTS
Object Type
RscGroup
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RscGrou
p
droppkt
Ratio
RscGroup Packet
Loss Ratio
Resource
Group
Measuremen
t
1224
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
4GBTS
Object Type
RscGroup
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RscGrou
p
Utilizatio
n Rate
RscGroup
Bandwidth Avg
Utilization Rate
Resource
Group
Measuremen
t
RscGroup
Bandwidth Peak
Utilization Rate
Resource
Group
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1225
PRS
Performance Report Reference
NE Type
4GBTS
Object Type
eNodeB
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
eNodeB
Traffic
Model
Report
times
E-RAB
Setup
Measuremen
t
times
E-RAB
Release
Measuremen
t
Intra-eNodeB HO
Per User Per BH
times
Outgoing
Intra-RAT
Handover
Measuremen
t
Inter-eNodeB HO
Per User Per BH
times
Outgoing
Intra-RAT
Handover
Measuremen
t
Inter-RAT HO Per
User Per BH
times
Outgoing
Inter-RAT
Handover
Measuremen
t
times
RRC Setup
Measuremen
t
1226
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
times
Outgoing
Inter-RAT
Handover
Measuremen
t
times
E-RAB
Setup
Measuremen
t
times
RRC Setup
Measuremen
t
times
RRC Setup
Measuremen
t
times
RRC Setup
Measuremen
t
times
RRC Setup
Measuremen
t
Paging message
times Per User Per
BH
times
Paging
Measuremen
t
Paging response
times Per User Per
BH
times
RRC Setup
Measuremen
t
dedicated eRAB
Establish Per User
Per BH
times
E-RAB
Setup
Measuremen
t
times
Cell
Algorithm
Measuremen
t
DL experienced
Speed
Mbit/
s
Throughput
and Data
Volume
Measuremen
t
1227
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
UL experienced
Speed
Mbit/
s
Throughput
and Data
Volume
Measuremen
t
DL DataVolume per
user per BH
kbit/s
Throughput
and Data
Volume
Measuremen
t
UL DataVolume per
user per BH
kbit/s
Throughput
and Data
Volume
Measuremen
t
DL/UL DataVolum
Ratio
None
Throughput
and Data
Volume
Measuremen
t
kbit
Throughput
and Data
Volume
Measuremen
t
DL DataVolum per
eRAB
kbit
Throughput
and Data
Volume
Measuremen
t
UL DataVolum per
eRAB
kbit
Throughput
and Data
Volume
Measuremen
t
Throughput
and Data
Volume
Measuremen
t
1228
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
User SessionTime
per RAB per BH
Throughput
and Data
Volume
Measuremen
t
DL Connected Duty
Ratio Per BH
Throughput
and Data
Volume
Measuremen
t
UL Connected Duty
Ratio Per BH
Throughput
and Data
Volume
Measuremen
t
Spectrum Efficiency
DL
None
Throughput
and Data
Volume
Measuremen
t
Spectrum Efficiency
UL
None
Throughput
and Data
Volume
Measuremen
t
DL Scheduled User
to total user ratio
Cell User
Quantity
Measuremen
t
UL Scheduled User
to total user ratio
Cell User
Quantity
Measuremen
t
Burstness
None
Cell User
Quantity
Measuremen
t
Scheduled User to
total user ratio
None
Cell User
Quantity
Measuremen
t
1229
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
L.Traffic.User.Avg
None
Cell User
Quantity
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
4GBTS
Object Type
eNodeB
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
eNodeB
Traffic
Trend
Report
None
Cell User
Quantity
Measuremen
t
PS Call Times
None
E-RAB
Setup
Measuremen
t
1230
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DL Throughput
kbit
Throughput
and Data
Volume
Measuremen
t
UL Throughput
kbit
Throughput
and Data
Volume
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
4GBTS
Object Type
LTE Cell
Issue 01 (2016-09-15)
1231
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PDCCH
Utilizatio
n Rate
PDCCH Channel
AVG Utilization
Rate_CCE (TDD)
PRB
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
4GBTS
Object Type
LTE Cell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PDCCH
Utilizatio
n Rate
PDCCH Channel
AVG Utilization
Rate_CCE (FDD)
PRB
Measuremen
t
1232
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
4GBTS
Object Type
LTE Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PRACH
Utilizatio
n Rate
PRACH Channel
Utilization
Rate_Contention
Preamble (TDD)
RA
Measuremen
t
PRACH Channel
Utilization
Rate_NonContention Preamble
(TDD)
RA
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1233
PRS
Performance Report Reference
NE Type
4GBTS
Object Type
LTE Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PRACH
Utilizatio
n Rate
PRACH Channel
Utilization
Rate_Contention
Preamble (FDD)
RA
Measuremen
t
PRACH Channel
Utilization
Rate_NonContention Preamble
(FDD)
RA
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1234
PRS
Performance Report Reference
NE Type
4GBTS
Object Type
LTE Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PRB
Utilizatio
n Rate
PRB
Measuremen
t
PRB
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
4GBTS
Object Type
LTE Cell
Issue 01 (2016-09-15)
1235
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PRB
Utilizatio
n Rate
PRB
Measuremen
t
PRB
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
4GBTS
Object Type
Operator
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PRB
Utilizatio
n Rate
UL PRB Used
Utilization
Rate_MOCN (TDD)
PRB
Measuremen
t per
CNOperator
1236
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DL PRB Used
Utilization
Rate_MOCN (TDD)
PRB
Measuremen
t per
CNOperator
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
4GBTS
Object Type
Operator
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PRB
Utilizatio
n Rate
UL PRB Used
Utilization
Rate_MOCN (FDD)
PRB
Measuremen
t per
CNOperator
DL PRB Used
Utilization
Rate_MOCN (FDD)
PRB
Measuremen
t per
CNOperator
1237
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
31.2.3 VoIP
31.2.3.1 VoIP User Utilization Rate(TDD)
Report Type
Simple Report
NE Type
4GBTS
Object Type
LTE Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VoIP
User
Utilizatio
n Rate
VoIP User
Utilization Rate
(TDD)
E-RAB
Setup
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1238
PRS
Performance Report Reference
NE Type
4GBTS
Object Type
LTE Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VoIP
User
Utilizatio
n Rate
VoIP User
Utilization Rate
(FDD)
E-RAB
Setup
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
4GBTS
Object Type
LTE Cell
Issue 01 (2016-09-15)
1239
PRS
Performance Report Reference
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
LTE Cell
Traffic
Model
Report
times
E-RAB
Setup
Measuremen
t
times
E-RAB
Release
Measuremen
t
Intra-eNodeB HO
Per User Per BH
times
Outgoing
Intra-RAT
Handover
Measuremen
t
Inter-eNodeB HO
Per User Per BH
times
Outgoing
Intra-RAT
Handover
Measuremen
t
Inter-RAT HO Per
User Per BH
times
Outgoing
Inter-RAT
Handover
Measuremen
t
times
RRC Setup
Measuremen
t
times
Outgoing
Inter-RAT
Handover
Measuremen
t
times
E-RAB
Setup
Measuremen
t
times
RRC Setup
Measuremen
t
times
RRC Setup
Measuremen
t
1240
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
times
RRC Setup
Measuremen
t
times
RRC Setup
Measuremen
t
Paging response
times Per User Per
BH
times
RRC Setup
Measuremen
t
dedicated eRAB
Establish Per User
Per BH
times
E-RAB
Setup
Measuremen
t
times
Cell
Algorithm
Measuremen
t
DL experienced
Speed
Mbit/
s
Throughput
and Data
Volume
Measuremen
t
UL experienced
Speed
Mbit/
s
Throughput
and Data
Volume
Measuremen
t
DL DataVolume per
user per BH
kbit/s
Throughput
and Data
Volume
Measuremen
t
UL DataVolume per
user per BH
kbit/s
Throughput
and Data
Volume
Measuremen
t
1241
PRS
Performance Report Reference
Subrep
ort
Name
Issue 01 (2016-09-15)
Counter
Coun
ter
Unit
Function
Subset
Formula
DL/UL DataVolum
Ratio
None
Throughput
and Data
Volume
Measuremen
t
kbit
Throughput
and Data
Volume
Measuremen
t
DL DataVolum per
eRAB
kbit
Throughput
and Data
Volume
Measuremen
t
UL DataVolum per
eRAB
kbit
Throughput
and Data
Volume
Measuremen
t
Throughput
and Data
Volume
Measuremen
t
User SessionTime
per RAB per BH
Throughput
and Data
Volume
Measuremen
t
DL Connected Duty
Ratio Per BH
Throughput
and Data
Volume
Measuremen
t
UL Connected Duty
Ratio Per BH
Throughput
and Data
Volume
Measuremen
t
1242
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Spectrum Efficiency
DL
None
Throughput
and Data
Volume
Measuremen
t
Spectrum Efficiency
UL
None
Throughput
and Data
Volume
Measuremen
t
DL Scheduled User
to total user ratio
Cell User
Quantity
Measuremen
t
UL Scheduled User
to total user ratio
Cell User
Quantity
Measuremen
t
Burstness
None
Cell User
Quantity
Measuremen
t
Scheduled User to
total user ratio
None
Cell User
Quantity
Measuremen
t
L.Traffic.User.Avg
None
Cell User
Quantity
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1243
PRS
Performance Report Reference
NE Type
4GBTS
Object Type
LTE Cell
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
LTE Cell
Traffic
Trend
Report
None
Cell User
Quantity
Measuremen
t
PS Call Times
None
E-RAB
Setup
Measuremen
t
DL Throughput
kbit
Throughput
and Data
Volume
Measuremen
t
UL Throughput
kbit
Throughput
and Data
Volume
Measuremen
t
DL experienced
Speed
Mbit/
s
Throughput
and Data
Volume
Measuremen
t
UL experienced
Speed
Mbit/
s
Throughput
and Data
Volume
Measuremen
t
1244
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
NE Type
4GBTS
Object Type
LTE Cell Group
Subreport Information
Issue 01 (2016-09-15)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
LTE Cell
Group
Traffic
Trend
Report
None
Cell User
Quantity
Measuremen
t
PS Call Times
None
E-RAB
Setup
Measuremen
t
DL Throughput
kbit
Throughput
and Data
Volume
Measuremen
t
UL Throughput
kbit
Throughput
and Data
Volume
Measuremen
t
1245
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DL experienced
Speed
Mbit/
s
Throughput
and Data
Volume
Measuremen
t
UL experienced
Speed
Mbit/
s
Throughput
and Data
Volume
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 01 (2016-09-15)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management
window, and then read the description of each system counter in NE Reference Information in
PRS Online Help.
1246