Chemical Composition
Carbon
Manganese
Phosphorus
Sulfur
Chromium
Silicon
Molybdenum
Nickel
Iron
NILO
ALLOY 36
0.10max
0.06max
0.025max
0.025max
0.50max
0.35max
0.50max
35.0-38.0
Rem
Alloy 36
INVAR 36
0.10max
0.06max
0.025max
0.025max
0.50max
0.35max
0.50max
35.0-38.0
Rem
0.10max
0.06max
0.025max
0.025max
0.50max
0.35max
0.50max
35.0-38.0
Rem
UNS
K93600
0.10max
0.06max
0.025max
0.025max
0.50max
0.35max
0.50max
35.0-38.0
Rem
UDIMAR 300
VASCOMA
X 300
WNR
1.6354
UNS
AFNOR NF
WNR 1.3912
K93601
A54-301
0.10max
0.10max
0.10max
0.06max
0.06max
0.06max
0.025max
0.025max
0.025max
0.025max
0.025max
0.025max
0.50max
0.50max
0.50max
0.35max
0.35max
0.35max
0.50max
0.50max
0.50max
35.0-38.0
35.0-38.0
35.0-38.0
Rem
Rem
Rem
Mechanical Properties
MARAGING
300
WNR
1.6358
UNS
K93120
UNS K93160
71000(490)
71000(490)
35000(240)
35000(240)
35000(240)
42
42
Elongation %
42
42
42
42
NILO 36, ALLOY 36, INVAR 36, UNS K93600, UNS K93601 Plates
NILO 36, ALLOY 36, INVAR 36, UNS K93600, UNS K93601 Pipes
NILO 36, ALLOY 36, INVAR 36, UNS K93600, UNS K93601 Round Bar
NILO 36, ALLOY 36, INVAR 36, UNS K93600, UNS K93601 Tube
NILO 36, ALLOY 36, INVAR 36, UNS K93600, UNS K93601 Flanges
NILO 36, ALLOY 36, INVAR 36, UNS K93600, UNS K93601 Wire
NILO 36, ALLOY 36, INVAR 36, UNS K93600, UNS K93601 Fittings
Cold working
Cold working is not suitable for this alloy as it tends to distort the coefficients of thermal expansion.
42
Annealing
NILO 36 alloy may be annealed at 830oC (1525F) for about 30 min, water quenched and then reheated to 300C (570F) for 1 hour. This is followed by water
quenching and a final reheating to 100C (212F) for 48 hours and then air cooled.
Fabrication
Nilo alloy 36 can be hot or cold worked, machines and formed by process similar to those udes for austenitic stainless steel.
It can be welded, using Nickel Welding Electrode 141, INCO-WELD A, or INCO-WELD B electrodes for the manual metal arc process, and Nickel Filler Metal 61
or INCONEL Filler Metal 82 for TIG, plasma, MIG, or pulsed arc welding.
MIG spray and submerged arc welding processes are not recommended for the NILO alloy 36.
Machining
NILO alloy 36 should be machined in the annealed condition, using high speed steel or tungsten carbide tipped tools.
Cutting compounds should be straight cutting oil E.P. medium duty, or soluble oil 20:1 dilution for turning, drilling and milling.
Lower dilution ratios should be used for other machining methods.
"Aesteiron House", 107, Kika Street, 4th Floor, Gulalwadi, Mumbai - 400 004, India.
info@aesteiron.com
www.aesteiron.com
2016-17. The content on this website is owned by Registrant of domain www.aesteiron.com , Do not
copy any content (including images) without prior written consent. Manufacturer, Stockholder,
Suppliers, Traders, Wholesaler, Dealer, Distributor, Importer, Exporter, Stockiest of Alloy Steel Pipe
Tubes, Stainless Steel Pipe Tube & Carbon Steel Pipe Tube
Heat Treatment
For
most uses
of NILO
alloy 36, where
the alloy(1560-1650F),
is to be subjected
a wide
range of
fully annealed material is recommended.
A suitable
annealing
temperature
is 850-900C
the to
time
depending
ontemperatures,
the form and dimensions.
Slow cooling
is preferred.
Where
the highest
dimensional stability with minimum expansion is required for devices used within the normal range of ambient temperatures, the following heat
treatment is recommended:
Heat to 830C (1525F) for 30 minutes/water quench plus re-heat to 300C (570F) for 1 hour/air cool plus re-heat to 100C (212F) for 48 hours/air cool.
After this treatment the alloy should be fully stable at temperatures up to 100C (212F).
Protective atmospheres should be used when preheating or annealing.
Applications
The NILO 36 alloy is used in the following applications:
Making of standard length measurements and measuring devices
Cryogenic and laser components
Bi-metal strip, thermostats
Tanks and pipes that transport liquefied gases
Aerospace composites
Pendulum and precision components.
"Aesteiron House", 107, Kika Street, 4th Floor, Gulalwadi, Mumbai - 400 004, India.
info@aesteiron.com
www.aesteiron.com
2016-17. The content on this website is owned by Registrant of domain www.aesteiron.com , Do not
copy any content (including images) without prior written consent. Manufacturer, Stockholder,
Suppliers, Traders, Wholesaler, Dealer, Distributor, Importer, Exporter, Stockiest of Alloy Steel Pipe
Tubes, Stainless Steel Pipe Tube & Carbon Steel Pipe Tube