3. Recycling Abrasives. One ecologically sound method of minimizing
the waste resulting from surface preparation operations is to recycle abrasives used in blasting methods. Recycling abrasives is accomplished through a two step process where the abrasives are: Collected and then Reclaimed to separate out the reusable abrasive The collection of abrasives for recycling is somewhat more complicated than for simple disposal since the abrasive must be separated from dirt and debris. The abrasive can either be collected at the nozzle or after blasting. Once collected, the abrasives are placed into a reclaimer where the reusable abrasive is separated out. Also separated out is any dust, paint, or other debris which may have made its way into the collected abrasives. Containment and Disposal of Paint Waste [3.13.2, Part 3]
PROTECTING STEEL SUPERSTRUCTURES
DESIGN OF TWO SPAN CONTINUOUS PLATE GIRDER BRIDGELRFD 24 EXAMPLE 3.5 DET 24
DESIGN EXAMPLE 3.5
STEP 11: SHEAR CONNECTORS We must now compute the number of shear studs for the composite sections. Since we have provided detailed calculations in Design Example 3.3, we will not repeat it here. Since the assumed girder sections have been checked for Strength Limit States, Service Limit States, and Fatigue Limit State, we now can conclude that the girder meets all AASHTO LRFD requirements. Of course, if it were a real design, we may want to refine the sections and to produce a more economical design. As I mentioned earlier, bridge design is a trial and error process, with an objective of producing a safe, economical, and durable structure. STEP 11: Shear