Draft A
Date
2014-01-20
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website:
http://www.huawei.com
Email:
support@huawei.com
WCDMA RAN
Intelligently Out of Service Feature Parameter Description
Contents
Contents
1 About This Document..................................................................................................................1
1.1 Scope..............................................................................................................................................................................1
1.2 Intended Audience..........................................................................................................................................................1
1.3 Change History...............................................................................................................................................................1
2 Overview.........................................................................................................................................3
3 Technical Description...................................................................................................................4
4 Engineering Guidelines...............................................................................................................6
4.1 Requirements..................................................................................................................................................................7
4.2 Data Preparation.............................................................................................................................................................7
4.3 Activation.......................................................................................................................................................................7
4.4 Activation Observation...................................................................................................................................................8
4.5 Deactivation....................................................................................................................................................................9
5 Parameters.....................................................................................................................................11
6 Counters........................................................................................................................................13
7 Glossary.........................................................................................................................................15
8 Reference Documents.................................................................................................................16
ii
WCDMA RAN
Intelligently Out of Service Feature Parameter Description
1.1 Scope
This document describes WRFD-031000 Intelligently Out of Service, including its technical
principles and engineering guidelines.
Feature change
Changes in features of a specific product version
Editorial change
Changes in wording or addition of information that was not described in the earlier version
Draft A (2013-01-20)
Compared with Issue 01 (2013-04-28) of RAN15.0, Draft A (2014-01-20) of RAN16.0 includes
the following changes:
Change Type
Change Description
Parameter Change
Feature change
None
WCDMA RAN
Intelligently Out of Service Feature Parameter Description
Change Type
Change Description
Parameter Change
Editorial change
None
None
WCDMA RAN
Intelligently Out of Service Feature Parameter Description
2 Overview
Overview
This feature enables services to be handed over to other 2G or 3G cells without call drops before
the cell is out of service.
WCDMA RAN
Intelligently Out of Service Feature Parameter Description
3 Technical Description
Technical Description
This feature is introduced to prevent service interruption caused by insufficient battery voltage
or NodeB reset When one of these problems occurs, this feature enables the NodeB to
automatically reduce the pilot transmit power and hand over the UE to other 2G or 3G cells,
thus lowering the call drop ratio.
The out-of-service state is automatically triggered in the following cases:
l
Voltage of the batteries is lower than the preset threshold after the AC power is shut down
When the out-of-service state is triggered, the PCPICH power of the cells can be lowered step
by step until the UEs are handed over to other 2G or 3G cells. For example, the PCPICH power
can be lowered to 1 dB per 333 ms. This allows the services to be handed over to other 2G or
3G cells without call drops before the cell is out of service.
The Intelligently Out of Service feature is introduced to prevent service interruption caused by
insufficient battery voltage or NodeB reset. When one of these problems occurs, this feature
enables the NodeB to automatically reduce the pilot power and hand over the UEs to other
GERAN or UTRAN cells, thereby lowering the call drop ratio.
When the NodeB battery voltage is restored or the cell is unblocked, the pilot power gradually
rises so that the UEs are smoothly handed over back to the original cell from other GERAN or
UTRAN cells. This feature prevents the pilot power from directly rising to the maximum. If the
pilot power directly rises to the maximum, interference is caused towards the neighboring cells
and call drops occur in the neighboring UTRAN cells.
This feature gradually reduces the pilot power in the following scenarios:
l
Voltage of the batteries is lower than the preset threshold after the AC power is shut down
This feature gradually increases the pilot power in the following scenarios:
l
When the out-of-service state is triggered, the PCPICH power of the cells can be lowered step
by step until the UEs are handed over to other GERAN or UTRAN cells. For example, the
Issue Draft A (2014-01-20)
WCDMA RAN
Intelligently Out of Service Feature Parameter Description
3 Technical Description
PCPICH power can be lowered to 1 dB per 333 ms. This allows the services to be handed over
to other GERAN or UTRAN cells without call drops before the cell is out of service.
Increase of the cell pilot power uses the same parameters as those for reduction of the cell pilot
power. Increasing the cell pilot power aims to gradually hand over the services back to the
original cell from the neighboring cells.
WCDMA RAN
Intelligently Out of Service Feature Parameter Description
4 Engineering Guidelines
Engineering Guidelines
This section describes how to activate, verify, and deactivate the basic feature WRFD-031000
Intelligently Out of Service.
WCDMA RAN
Intelligently Out of Service Feature Parameter Description
4 Engineering Guidelines
4.1 Requirements
l
Dependencies on Hardware
This feature does not depend on the hardware.
License
This feature is not under license control.
Parameter Name
Parameter ID
Setting Notes
Smooth
Power
Change
Function
Switch
SMTHPWRSWIT
CH
Radio Planning
(Internal planning)
Smart
default step
STEP
None
Radio Planning
(Internal planning)
Smart
default time
ratio
PERIOD
None
Radio Planning
(Internal planning)
4.3 Activation
Using MML Commands
Step 1 Run the NodeB MML command SET NODEBSMTHPWRSW. In this step, set Smooth Power
Change Function Switch to OPEN(OPEN).
Step 2 Run the NodeB MML command SET NODEBSMTHPWRPARA . In this step, set Smart
default step(0.5dB) and Smart default time ratio(100ms).
----End
WCDMA RAN
Intelligently Out of Service Feature Parameter Description
4 Engineering Guidelines
When configuring the Intelligently Out of Service feature on the CME, perform a single configuration first,
and then perform a batch modification if required.
Configure the parameters of a single object before a batch modification. Perform a batch modification
before logging out of the parameter setting interface.
Managed
Object (MO)
NE
Parameter Name
Parameter
ID
Configurabl
e in CME
Batch
Modification
Center
NODEBSMTHP
WR
NodeB
Smooth Power
Change Function
Switch
SMTHPW
RSWITCH
Yes
STEP
PERIOD
WCDMA RAN
Intelligently Out of Service Feature Parameter Description
4 Engineering Guidelines
4.5 Deactivation
Using MML Commands
Step 1 Run the NodeB MML command SET NODEBSMTHPWRSW . In this step, set Smooth Power
Change Function Switch to CLOSE(Close).
----End
When configuring the Intelligently Out of Service feature on the CME, perform a single configuration first,
and then perform a batch modification if required.
Configure the parameters of a single object before a batch modification. Perform a batch modification
before logging out of the parameter setting interface.
WCDMA RAN
Intelligently Out of Service Feature Parameter Description
4 Engineering Guidelines
Managed
Object (MO)
NE
Parameter
Name
Parameter ID
Configurable
in CME Batch
Modification
Center
NODEBSMTH
PWR
NodeB
Smooth
Power
Change
Function
Switch
SMTHPWRSWI
TCH
Yes
10
WCDMA RAN
Intelligently Out of Service Feature Parameter Description
5 Parameters
Parameters
NE
MML
Command
Feature ID
Feature Name
Description
SMTHPWRSW
ITCH
BTS3900,
BTS3900
WCDMA
SET
NODEBSMTH
PWRSW
WRFD-031000
Intelligently Out
of Service
Meaning:Indicates the
Smooth Power
Change
Function
Switch. The
function will be
enabled if this
parameter is set
to OPEN.
LST
NODEBSMTH
PWRSW
GUI Value
Range:OPEN
(Open), CLOSE
(Close)
Unit:None
Actual Value
Range:OPEN,
CLOSE
Default
Value:CLOSE
(Close)
11
WCDMA RAN
Intelligently Out of Service Feature Parameter Description
5 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
STEP
BTS3900,
BTS3900
WCDMA
SET
NODEBSMTH
PWRPARA
WRFD-031000
Intelligently Out
of Service
LST
NODEBSMTH
PWRPARA
GUI Value
Range:1~20
Unit:0.5dB
Actual Value
Range:0.5~10,
step:0.5
Default Value:3
PERIOD
BTS3900,
BTS3900
WCDMA
SET
NODEBSMTH
PWRPARA
WRFD-031000
Intelligently Out
of Service
LST
NODEBSMTH
PWRPARA
12
WCDMA RAN
Intelligently Out of Service Feature Parameter Description
6 Counters
Counters
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67199736
VS.Cell.Unavail
Time
Cell
Unavailability
Duration
BSC6900
WRFD-031000
Intelligently Out
of Service
67203853
VS.NodeB.UnavailTime
Duration of
NodeB
Unavailability
BSC6900
WRFD-031000
Intelligently Out
of Service
67204837
VS.Cell.Unavail
Time.Sys
Duration of Cell
Unavailability
Due to System
Faults for Cell
BSC6900
WRFD-031000
Intelligently Out
of Service
67204838
VS.Cell.HSDP
A.UnavailTime
Duration of
HSDPA Service
Unavailability
Due to System
Fault for Cell
BSC6900
WRFD-031000
Intelligently Out
of Service
67204839
VS.Cell.HSUP
A.UnavailTime
Duration of
HSUPA Service
Unavailability
Due to System
Fault for Cell
BSC6900
WRFD-031000
Intelligently Out
of Service
73428521
VS.Cell.Unavail
Time.NodeBBL
K
Duration of Cell
Unavailability
due to NodeB
Blocking
BSC6900
WRFD-031000
Intelligently Out
of Service
67199736
VS.Cell.Unavail
Time
Cell
Unavailability
Duration
BSC6910
WRFD-031000
Intelligently Out
of Service
13
WCDMA RAN
Intelligently Out of Service Feature Parameter Description
6 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
67203853
VS.NodeB.UnavailTime
Duration of
NodeB
Unavailability
BSC6910
WRFD-031000
Intelligently Out
of Service
67204837
VS.Cell.Unavail
Time.Sys
Duration of Cell
Unavailability
Due to System
Faults for Cell
BSC6910
WRFD-031000
Intelligently Out
of Service
67204838
VS.Cell.HSDP
A.UnavailTime
Duration of
HSDPA Service
Unavailability
Due to System
Fault for Cell
BSC6910
WRFD-031000
Intelligently Out
of Service
67204839
VS.Cell.HSUP
A.UnavailTime
Duration of
HSUPA Service
Unavailability
Due to System
Fault for Cell
BSC6910
WRFD-031000
Intelligently Out
of Service
73428521
VS.Cell.Unavail
Time.NodeBBL
K
Duration of Cell
Unavailability
due to NodeB
Blocking
BSC6910
WRFD-031000
Intelligently Out
of Service
14
WCDMA RAN
Intelligently Out of Service Feature Parameter Description
7 Glossary
Glossary
15
WCDMA RAN
Intelligently Out of Service Feature Parameter Description
8 Reference Documents
Reference Documents
16