Mannings
The well renowned Mannings
6 channel Automatic P256
Programmer/Controller, has been
developed to be used in
conjunction with Mannings heat
treatment Transformer Units to
provide automatic temperature
process control of up to six
Transformer Unit output
channels.
Each control channel can either
be operated for manual
temperature control of the
workpiece, or in automatic mode.
In automatic mode, the channel
controller will ensure that the
control zone temperature closely
follows the temperature rise, hold
and fall and hold period
parameters programmed by
the operator.
By means of microprocessor
controlled programming, LCD
display and push button
operation, programming and
operation of the unit are kept
simple and user friendly.
The LCD display provides visual
indication of the running heat
treatment program status and
control zone output. In addition,
individual control zone neons
indicate when a control zone
contactor is energised.
An important feature of the P256
is the Reversed Thermocouple
Cut-out. This feature
automatically cuts out the control
zone contactor, and hence heater
power, when any control zone
thermocouple input indicates a
temperature of minus forty
Specifications
General
Case material:
Case dimensions:
Display:
Display backlight:
Buttons:
7 kg
Serial interface:
2 off RS422/RS485
Supply:
Environment:
Sensor:
Units:
Degrees C or F
Resolution:
Sampling:
Break detection:
Up scale
Prop band:
TP cycle time:
20 seconds
Hold band:
Hold type:
Manual or automatic
Heating rate:
Soak temperature:
Soak time:
Cooling rate:
End temperature:
Hold mode:
Mannings
Units 21 24
Slaidburn Crescent
Southport
Merseyside
PR9 9YF
United Kingdom
Telephone: +44 (0)1704 538 202
Fax: +44 (0)1704 215 601
Email: services@mannings.co.uk
Website: www.mannings.uk.com
The data in this leaflet was valid at the time of publishing,
and is subject to change without notice. Mannings
reserves the right to modify its products at any time
without further obligation.