The gravity anomalies of several bodies of simple shape serve to illustrate the
form and size of anomalies expected in typical field surveys.
The sphere
The gravity anomaly of a sphere is that of a point mass at the sphere center
equal to the product of the density and volume of the sphere. This model is also the
simplest example of the non-unique property of the gravity field: only the V
product governs the anomaly and neither the size or density can be determined
individually.
g z g sin g
GM
r
GM
x z2
2
z
(x z )
2
2 1/ 2
GM
z
(x z 2 )3 / 2
4
M R 3
3
and so
4
z
g z G R 3 2
3
(x z 2 )3 / 2
-1-
4
R3
G 2
3
z
A useful rule of thumb for the depth of the center of mass can be derived from the
half width of the anomaly at its half height:
-2-
z
x z2
2
and z = x1/2
-3-
Note that the cylinder anomaly falls off more slowly than the sphere, 1/z rather than
1/z2, and that the anomaly is broader than that of the sphere. While it might be
difficult to distinguish between these two bodies in a survey profile, a map would
show the parallel linear contours of the cylinder vs. the circular contours of the
sphere.
-4-
When the depth, h, is greater than the thickness, t, the anomaly in the vertical
gravity is:
gz = 2 G t /2 + tan-1(x/h)
-5-
As x goes to infinity gz 2 G t
slab.
In practical units: (density in gm/cm3 and t in meters)
gz = 0.04192 G t 1/2 + 1/ tan-1(x/h)
From this formula the t product is simply gz
max/0.04192.
An independent
estimate of the depth can be obtained from the horizontal derivative of the anomaly
at x = 0 (the inflection point of the anomaly) via:
h = (gz max)/ (dg/dx)-1
-6-
Figure 2.4.3
-7-