indd 1
R&STSMW
Universal Radio
Network Analyzer
Scanner for drive tests
and I/Q streaming
16.10.2015 10:56:52
R&STSMW
Universal Radio
Network Analyzer
At a glance
The R&STSMW universal radio network analyzer is
a platform for optimizing all conventional wireless
communications networks. Two frontends for any
input frequency from 30MHz to 6GHz, preselection
and software-defined architecture offer unsurpassed
performance while providing maximum flexibility.
In addition to functioning as a scanner for wireless
communications networks, the R&STSMW is also
an ideal digital I/Q baseband receiver.
Key facts
User-definable input frequency range from 30MHz to
6GHz
Two independent RF and signal processing paths,
eachwith a bandwidth of up to 20MHz
Integrated preselection for high intermodulation
suppression while dynamic range is high
Support of LTE-FDD and TD-LTE
Support of TD-SCDMA
Parallel measurements in GSM, WCDMA, LTE,
CDMA2000, 1xEV-DO, TETRA and WiMAX networks
with the R&SROMES4 drive test software
Spectrum measurements with the RF power scan option
I/Q baseband streaming and capturing
Integrated GPS
TSMW_bro_en_5213-9934-12_v1200.indd 2
16.10.2015 10:57:01
R&STSMW
Universal Radio
Network Analyzer
Benefits and
key features
Unsurpassed h
ardware platform performanceand
flexibility
Broadband with 20MHz bandwidth and maximum
frequency range from 30MHz to 6GHz
Maximum configuration flexibility
Top dynamic range and measurement accuracy owing to
adaptive preselection
Update of hardware platform via software
Integrated SuperSense GPS with PPS
R&STSMF special solution
page 14
TSMW_bro_en_5213-9934-12_v1200.indd 3
16.10.2015 10:57:01
TSMW_bro_en_5213-9934-12_v1200.indd 4
16.10.2015 10:57:02
Subcarriers
MIMO configuration
R1
R1
R1
TX1
RX1
TX1:RX1 TX1:RX2
TX2:RX1 TX2:RX2
R1
R1
R1
TX2
R1
R1
TX1
Symbols
Subcarriers
TX1
R1
R1
R1
R1
R1
TX2
TX2
RX2
R1
R1
R1
Symbols
TSMW_bro_en_5213-9934-12_v1200.indd 5
16.10.2015 10:57:04
Support of LTE-A
In an LTE-Advanced network with carrier aggregation (CA)
the network schedules data for a terminal on several carri
ers at the same time. As the component carriers utilize dif
ferent frequencies, it is vital to validate the coverage of the
carriers. The R&STSMW is ideal for this task since it sup
ports the simultaneous measurement of any combination
of LTE carriers. Even MIMO measurements are possible on
all component carriers.
Quality
Narrowband
Wideband
Power
RSRP
SNR
Total power
SINR
RS-SINR
Ptotal
RSSI
1)
2)
TSMW_bro_en_5213-9934-12_v1200.indd 6
16.10.2015 10:57:11
TSMW_bro_en_5213-9934-12_v1200.indd 7
16.10.2015 10:57:13
EUTRA
Uplink (UL) operating band
operating band BS: receive
UE: transmit
Duplex mode
2110MHz to 2170MHz
FDD
1920MHz to 1980MHz
1850MHz to 1910MHz
1930MHz to 1990MHz
FDD
1710MHz to 1785MHz
1805MHz to 1880MHz
FDD
1710MHz to 1755MHz
2110MHz to 2155MHz
FDD
824MHz to 849MHz
869MHz to 894MHz
FDD
830MHz to 840MHz
875MHz to 885MHz
FDD
2500MHz to 2570MHz
2620MHz to 2690MHz
FDD
880MHz to 915MHz
925MHz to 960MHz
FDD
1749.9MHz to 1784.9MHz
1844.9MHz to 1879.9MHz
FDD
10
1710MHz to 1770MHz
2110MHz to 2170MHz
FDD
11
1427.9MHz to 1447.9MHz
1475.9MHz to 1495.9MHz
FDD
12
699MHz to 716MHz
729MHz to 746MHz
FDD
13
777MHz to 787MHz
746MHz to 756MHz
FDD
14
788MHz to 798MHz
758MHz to 768MHz
FDD
15
Reserved
Reserved
FDD
16
Reserved
Reserved
FDD
17
704MHz to 716MHz
734MHz to 746MHz
FDD
18
815MHz to 830MHz
860MHz to 875MHz
FDD
19
830MHz to 845MHz
875MHz to 890MHz
FDD
20
832MHz to 862MHz
791MHz to 821MHz
FDD
21
1447.9MHz to 1462.9MHz
1495.9MHz to 1510.9MHz
FDD
22
3410MHz to 3490MHz
3510MHz to 3590MHz
FDD
23
2000MHz to 2020MHz
2180MHz to 2200MHz
FDD
24
1626.5MHz to 1660.5MHz
1525MHz to 1559MHz
FDD
25
1850MHz to 1915MHz
1930MHz to 1995MHz
FDD
26
814MHz to 849MHz
859MHz to 894MHz
FDD
27
807MHz to 824MHz
852MHz to 869MHz
FDD
28
703MHz to 748MHz
758MHz to 803MHz
FDD
29
717MHz to 728MHz
30
2305MHz to 2315MHz
2350MHz to 2360MHz
FDD
31
452.5MHz to 457.5MHz
462.5MHz to 467.5MHz
FDD
1900MHz to 1920MHz
1900MHz to 1920MHz
TDD
...
33
34
2010MHz to 2025MHz
2010MHz to 2025MHz
TDD
35
1850MHz to 1910MHz
1850MHz to 1910MHz
TDD
36
1930MHz to 1990MHz
1930MHz to 1990MHz
TDD
37
1910MHz to 1930MHz
1910MHz to 1930MHz
TDD
38
2570MHz to 2620MHz
2570MHz to 2620MHz
TDD
39
1880MHz to 1920MHz
1880MHz to 1920MHz
TDD
40
2300MHz to 2400MHz
2300MHz to 2400MHz
TDD
41
2496MHz to 2690MHz
2496MHz to 2690MHz
TDD
42
3400MHz to 3600MHz
3400MHz to 3600MHz
TDD
43
3600MHz to 3800MHz
3600MHz to 3800MHz
TDD
44
703MHz to 803MHz
703MHz to 803MHz
TDD
TSMW_bro_en_5213-9934-12_v1200.indd 8
16.10.2015 10:57:13
All-in-one drive
test solution with
R&SROMES4
Improvement of QoS
Example: LTE
During an FTP download, a test terminal displays the maxi
mum current data transmission rate. If this rate is too low
with regard to the wireless communications technology
beingused,thechannelqualityindicator(CQI)measured
by the test terminal can be used to trace the cause of the
problem.
Technology
Option
R&STSMWK30
3GPP LTE
R&STSMWK29
WiMAXIEEE802.16e
R&STSMW-K28
GSM/WCDMA
R&STSMW-K21
CDMA2000,1xEV-DORev.B
R&STSMWK22
TETRA
R&STSMWK26
TETRARel.2(TEDS)
R&STSMWK26Q
TETRA DMO
R&STSMWK26D
RF power scan
R&STSMW-K27
If the CQI is too low, either the received signal may be too
weak or the measured SINR may be very low. In this case,
the test terminal will not be able to use any higherorder
modulation types such as 64QAM. The R&STSMW can
detect and identify such trouble spots independently of
the terminal. If the received signals are too weak, this may
indicate that the test terminal did not find a neighbor cell.
The R&STSMW is networkindependent because it does
not rely on neighbor lists. Unknown neighbor cells can
therefore be detected without any problem. Even auto
maticneighborrelation(ANR)algorithmsthatareusedby
self-organizingnetworks(SON)canbeverified.
Test terminal
R&SROMES4 software
TSMW_bro_en_5213-9934-12_v1200.indd 9
16.10.2015 10:57:15
Parallel support of
multiple wireless
communications
technologies
10
TSMW_bro_en_5213-9934-12_v1200.indd 10
16.10.2015 10:57:15
Technologies supported
by the R&STSMW
SIB decoding
GSM
WCDMA
CDMA2000
WiMAX IEEE802.16e
TD-LTE
LTE FDD
TD-SCDMA
TSMW_bro_en_5213-9934-12_v1200.indd 11
16.10.2015 10:57:15
Maximum flexibility
when evaluating
I/Qdata
12
TSMW_bro_en_5213-9934-12_v1200.indd 12
16.10.2015 10:57:15
Application examples
Navigation: recording of GPS/Glonass/Galileo/Compass
(BeiDou)signalsindifferentregions.Recordedsignals
can be replayed under controlled conditions in the lab.
This results in faster timetomarket for GPS receivers and
mobile phones
Broadcasting:recordingofTV/FMsignalsduringa
drive test. Recorded signals can be replayed under lab
conditionstotestTV/FMreceivers
LTE MIMO and LTEAdvanced: channel measurements
for4x2MIMOscenariosandsubsequentanalysis,e.g.
using MATLAB
Two ways to record I/Q data: I/Q data can be analyzed on a PC or replayed on a signal generator
1) Record I/Q data with up to 20 MHz bandwidth
PC
TSMW
I/Q data
Gbit LAN I/Q interface
LAN 1 Gbit
PC, network
2 I/Q
Multiplexing of
two I/Q data streams
R&SIQR-K105
USB 2.0
USB storage
Export (ofine)
IQR-K101
R&STSMW with
two RF frontends
R&SIQR
Recording
Playing
Generator
e.g. R&SSMBV, R&SSFC
TSMW_bro_en_5213-9934-12_v1200.indd 13
16.10.2015 10:57:20
Unsurpassed
hardware platform
performanceand
flexibility
Frontend 1
Processor
board
GPS
Power board
DMA
Gbit
GPS
14
TSMW_bro_en_5213-9934-12_v1200.indd 14
16.10.2015 10:57:24
TSMW_bro_en_5213-9934-12_v1200.indd 15
16.10.2015 10:57:29
Supported by many
drive test tools
Software product
Supported functionality
R&SROMES4
Network Problem Analyzer
GSM,WCDMA,LTE(FDD/TDD),LTEMIMO,CDMA2000,
1xEV-DO,WiMAXTM, RF power scan
Diversity Optimizer
Diversity Benchmarker
GSM,WCDMA,LTE(FDD/TDD),LTEMIMO,CDMA2000,
1xEV-DO,RFpowerscan
XCAL
XCAP
WCDMA,CDMA2000,1xEV-DO,LTE(FDD/TDD)
Nemo Outdoor
Nemo Invex
GSM,WCDMA,LTE(FDD/TDD),LTEMIMO,CDMA2000,
1xEV-DO,RFpowerscan
TEMS Investigation
GSM,WCDMA,LTE(FDD/TDD),LTEMIMO,CDMA2000,
1xEV-DO
Pilot Pioneer
Pilot Navigator
GSM,WCDMA,LTE(FDD/TDD),CDMA2000,1xEV-DO,
RFpowerscan
16
TSMW_bro_en_5213-9934-12_v1200.indd 16
16.10.2015 10:57:37
Specifications
Specifications
RF characteristics
Frequency range
Level measurement uncertainty
30MHz to 6GHz
S/N > 16dB, 30MHz to 3GHz
< 1dB
< 1.5dB
5dBm/0V DC
Noise figure
900MHz
2100MHz
3500MHz
6000MHz
level 2 45dBm, 3.5GHz, preamplifier on
level 2 35dBm, 3.5GHz, preamplifier off
RF receive paths
independent
VSWR
30MHz f 2.5GHz
1.5 (typ.)
2.5GHz f 6GHz
1.7 (typ.)
Preselection channels
LTE characteristics
Frequency bands supported
Measurement modes
Measurement speed
no restrictions
LTE-FDD and TD-LTE
max. 200Hz
123dBm
140.9dBm
127dBm
144.9dBm
20dB to +42dB
20dB to +42dB
< 108
WiMAX characteristics
Frequency bands supported
no restrictions
Measurement speed
5 measurements/s
RSSI
< 112dBm
< 97dBm
20dB to +26dB
GSM characteristics
Frequency bands supported
no restrictions
Measurement modes
in parallel
Measurement speed
Sensitivity
118dBm
Measurement accuracy
1dB (typ.)
1)
TSMW_bro_en_5213-9934-12_v1200.indd 17
16.10.2015 10:57:37
Specifications
WCDMA characteristics
Frequency bands supported
no restrictions
max. 32
Measurement speed
112dBm/121dBm
118dBm/123dBm
< 109
high speed/high dynamic range
22dB/30dB
> 17dB
TD-SCDMA characteristics
Frequency bands supported
no restrictions
max. 32
high speed
high sensitivity
114dBm/113dBm
115dBm/114dBm
115dBm/117dBm
RSCP
high speed
high sensitivity
7dB
7dB
no restrictions
max. 32
automatic detection of all 512 PN codes
PN detection sensitivity
Dynamic range
Ec/I0
29dB
no restrictions
max. 32
Measurement speed
PN detection sensitivity
Dynamic range
120dBm
Ec/I0
15dB
TETRA characteristics
TETRA bands supported
Number of RF carrier frequencies
no restrictions
within a 10MHz downlink band
Channel resolution
25kHz (QPSK)
Measurement speed
Sensitivity (RSSI)
max. 400
max. 8000 channels/s, 20/s for a 10MHz block
RSSI measurements
126dBm
120dBm
126dBm
18
TSMW_bro_en_5213-9934-12_v1200.indd 18
16.10.2015 10:57:37
Specifications
TETRA2 (TEDS) characteristics
TETRA bands supported
Number of RF carrier frequencies
no restrictions
within a 10MHz band
max. 400
autodetection
Channel resolution
Channel bandwidths
25kHz (QAM)
Code rates
autodetection
1/2, 2/3, 1
Modulation
autodetection
Sensitivity
RSSI measurements
115dBm
max. 22 Msample/s
Measurement speed
115dBm,
4QAM code rate 2/3 1.8dB
4QAM code rate 2/3 + 4dB
4QAM code rate 2/3 + 6.1dB
4QAM code rate 2/3 + 8.5dB
4QAM code rate 2/3 + 11.4dB
max. 8000 channels/s, 20/s for a 10MHz block
800kHz to 20MHz
Resampling rate
1 Msample/s to 23 Msample/s
Demodulation bandwidth
20MHz
200 Mbyte
R&SROMES4 drive test software not required;
MATLAB or customer-specific software must
be installed
8/12/16/20 bit
2)
Interface
Standard protocol
direction
output
level
LVDS
connector
26-pin MDR
sample rate
up to 23 Msample/s
up to 2 23 Msample/s (multiplex mode)
20 bit for I and Q,
18 bit for I and Q (multiplex mode)
unused
resolution
general purpose signals
Transfer mode
enable mode
supported
Channel multiplex
up to 8 channels
Source
frontends 1 and 2
30dBm to 60dBm
adjustment steps
4dB
RF power scan
Frequency range
30MHz to 6GHz
Frequency resolution
Sensitivity
140Hz to 1.438MHz
22.4kHz RBW, RMS, at 900MHz
preamplifier off
112dBm
preamplifier on
121dBm
134dBm
preamplifier on
141dBm
2)
TSMW_bro_en_5213-9934-12_v1200.indd 19
16.10.2015 10:57:37
Specifications
Scan speed
130Hz
690Hz
64Hz
20
Detectors
Reference frequency
1 106 aging per year
Aging
Output for internal reference signal
10MHz
level
0dBm (typ.)
source impedance
50
frequency
10MHz
max.deviation
3 106
recommended
0dBm to 19dBm
input impedance
50
Physical characteristics
RF inputs
SnapN connector
50
Data interface
RJ-45
10/100/1000BaseT Ethernet3)
Reference input/output
BNC female
50
Pulse input/output
2 BNC female
5V, TTL
GPS antenna
GPS receiver
Sensitivity
Acquisition
Channels
System requirements
3)
cold start
tracking
cold start
hot start
148dBm
162dBm
26s
< 1s
50
controller (Pentium IV, 2 Gbyte RAM, Gigabit Ethernet (jumbo packets of at least 4kbyte,
flow control enabled), USB 1.0, USB required only if GPS is used as standalone application)
Jumbo frames are recommended for measurements with R&STSMW-K1. All measurement speed specifications can vary depending on the speed of the PC used.
20
TSMW_bro_en_5213-9934-12_v1200.indd 20
16.10.2015 10:57:37
General data
Environmental conditions
Temperature
+5C to +40C
0C to +50C
25C to +85C
Damp heat
Mechanical resistance
Vibration
sinusoidal
random
Shock
Power rating
Rated voltage
9V to 18V DC
Rated current
max. 10A
use with R&STSMW-Z1 external power supply
WHD
Electromagnetic compatibility
EU
Electrical safety
EU
Korea
USA
UL61010-1
Canada
CAN/CSA-C22.2
No. 61010.1-04
VDE-GS mark, certificate no. 40023750
Dimensions
Weight
Product conformity
TSMW_bro_en_5213-9934-12_v1200.indd 21
16.10.2015 10:57:37
Ordering information
Designation
Type
Order No.
R&STSMW
1503.3001.03
R&STSMF
1503.3001.04
R&STSMW-K20
1515.7320.02
R&STSMW-K21
1503.4514.02
R&STSMW-K22
1503.4520.02
R&STSMW-K26
1510.8792.02
R&STSMW-K26Q
1510.8792.03
R&STSMW-K26D
1510.8792.04
R&STSMW-K27
1503.4537.02
R&STSMW-K28
1503.4543.02
R&STSMW-K29
1503.4550.02
R&STSMW-K30
1514.4085.02
R&STSMW-K31
3590.6813.02
R&STSMW-K32
1514.4256.02
R&STSMW-K40
1515.5440.02
R&STSMW-K1
1503.3960.02
R&STSMW-B1
1514.4004.02
R&STSMW-K71
1514.4027.02
R&SROMES4T1W
1117.6885.02
R&SROMES4
1117.6885.04
R&SROMES4T1W
1117.6885.02
R&SROMES4LOC
1117.6885.32
R&SROMES4ACD
1506.9869.02
Power Supply
R&STSMW-Z1
1503.4608.02
R&STSMW-Z2
1503.3901.02
Backpack System
R&STSMW-Z3N
1514.4091.02
R&STSME-Z3B1
1519.0913.02
R&STSME-Z3BC2
1519.0920.02
R&STSMW-Z5
1117.9955.02
R&SHA-Z220
1309.6175.00
R&STS51GA30
1090.7993.12
R&STSMW-ZA1
1145.6705.00
R&STSMW-ZA2
1145.6711.00
R&STSMW-ZA3
1145.6728.00
R&STSMW-ZA4
1145.6734.00
R&STSMW-ZE2
1117.8165.00
R&STSMW-ZE7
1519.5709.02
R&STSMW-ZE8
1506.9852.02
R&STSMW-Z7
1518.1845.02
R&STSMW-Z8
1518.1851.02
R&STSMW-Z20
1506.9775.02
Base unit
Universal Radio Network Analyzer
(scope of delivery: R&STSMW, LAN cable, 2 antennas (820MHz to
960MHz, 1700MHz to 2170MHz), GPS antenna, 12V DC power cable
(cigarette lighter connector), CD)
Universal Radio Network Analyzer, without I/Q streaming capabilities
R&STSMW options
Software options
R&STSMW Scanner Driver for R&SROMES4 Drive Test Software
Additional software
System components
22
TSMW_bro_en_5213-9934-12_v1200.indd 22
16.10.2015 10:57:37
Service options
Extended Warranty, one year
R&SWE1
R&SWE2
R&SWE3
R&SWE4
R&SCW1
R&SCW2
R&SCW3
R&SCW4
Your local Rohde&Schwarz expert will help you determine the optimum solution for your requirements.
To find your nearest Rohde&Schwarz representative, visit www.sales.rohde-schwarz.com
TSMW_bro_en_5213-9934-12_v1200.indd 23
16.10.2015 10:57:37
Worldwide
Local and personalized
Customized and exible
Uncompromising quality
Long-term dependability
About Rohde&Schwarz
The Rohde&Schwarz electronics group offers innovative
solutions in the following business fields: test and measurement, broadcast and media, secure communications,
cybersecurity, radiomonitoring and radiolocation. Founded
more than 80 years ago, this independent company has
an extensive sales and service network and is present in
more than 70 countries. The electronics group is among
the world market leaders in its established business fields.
The company is headquartered in Munich, Germany. It
also has regional headquarters in Singapore and Columbia,
Maryland, USA, to manage its operations in these regions.
Sustainable product design
Environmental compatibility and eco-footprint
Energy efficiency and low emissions
Longevity and optimized total cost of ownership
Certified Quality Management
ISO9001
ISO14001
Rohde&Schwarz GmbH&Co. KG
www.rohde-schwarz.com
Regional contact
Europe, Africa, Middle East | +4989412912345
customersupport@rohde-schwarz.com
North America | 1888TESTRSA (18888378772)
customer.support@rsa.rohde-schwarz.com
Latin America | +14109107988
customersupport.la@rohde-schwarz.com
Asia Pacific | +6565130488
customersupport.asia@rohde-schwarz.com
China | +868008108228 | +864006505896
customersupport.china@rohde-schwarz.com
5213993412
TSMW_bro_en_5213-9934-12_v1200.indd 24
16.10.2015 10:57:38