255
255
255
255
255
255
255
B-2000
B-2100
B-2110
B-2110.1
B-2110.2
B-2110.3
B-2110.4
B-2110.5
B-2110.6
B-2110.7
B-2111
B-2111.1
B-2111.2
B-2111.3
B-2111.4
B-2112
B-2112.1
B-2112.2
B-2112.3
Generic Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Certified Design Specification Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents of the Certified Design Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Permanent Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Handling, Storage, and Shipping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Identification of Enforcement Authorities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Filing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Review of Design Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Responsibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Multiple Code Class Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Optional Use of Code Classes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Special Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Design Basis and Service Limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Plant and System Service Conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Design Loadings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Establishment of Component and Component Support Design and
Service Limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Test Loadings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
N Certificate Holders Responsibilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Manufacturers of Small Pumps and Valves and of Component
Standard Supports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Compliance with N Certificate Holders Responsibilities. . . . . . . . . . . . . . . . . . . . . . . . .
Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Loadings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Design Loads. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Design Pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Design Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Design Mechanical Loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Service Loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
256
256
256
256
256
256
256
256
256
256
256
256
256
256
256
256
256
257
B-2112.4
B-2113
B-2113.1
B-2113.2
B-2120
B-2121
B-2122
B-2122.1
B-2122.2
B-2122.3
B-2123
251
257
257
257
257
257
257
257
257
257
257
257
258
B-2123.1
B-2123.2
B-2123.3
B-2124
B-2125
B-2126
B-2130
B-2131
B-2132
B-2140
B-2150
B-2151
B-2152
B-2153
B-2154
B-2155
B-2160
B-2161
B-2161.1
B-2161.2
B-2162
B-2163
B-2164
B-2164.1
B-2164.2
B-2165
B-2166
B-2200
B-2210
B-2220
B-2300
258
258
258
258
258
258
260
260
260
260
260
260
260
260
260
260
260
260
260
260
260
261
261
261
261
261
261
261
261
261
261
B-3000
B-3100
262
262
B-4000
B-4100
B-4110
B-4120
B-4121
B-4122
B-4200
B-4210
B-4211
B-4220
B-4230
B-4231
B-4232
B-4233
B-4240
B-4250
263
263
263
263
263
263
263
263
263
263
263
263
263
263
264
264
252
B-4300
Regulatory Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
264
B-5000
B-5100
B-5110
B-5120
B-5121
B-5121.1
B-5121.2
B-5121.3
B-5121.4
B-5121.5
B-5121.6
B-5121.7
B-5121.8
B-5122
B-5122.1
B-5122.2
B-5123
B-5123.1
B-5123.2
B-5200
B-5210
B-5220
b-5230
B-5231
B-5232
B-5233
B-5240
B-5250
B-5300
265
265
265
265
265
265
265
265
265
265
265
265
265
265
265
265
265
265
265
265
265
265
266
266
266
266
266
266
266
B-6000
B-6100
B-6110
B-6120
B-6121
B-6122
B-6123
267
267
267
267
267
267
267
B-7000
B-7100
B-7110
B-7120
B-7121
B-7122
B-7123
B-7124
268
268
268
268
268
268
268
268
253
B-8000
B-8100
B-8110
B-8120
B-8121
B-8130
B-8300
269
269
269
269
269
269
269
B-9000
B-9100
B-9110
B-9120
B-9121
B-9122
B-9123
B-9124
B-9130
B-9140
270
270
270
270
270
270
271
271
271
271
B-10000
B-10100
B-10110
B-10111
B-10112
B-10113
B-10114
B-10115
272
272
272
272
272
272
272
272
B-11000
B-11100
B-11200
B-11300
B-11310
B-11320
B-11330
B-11340
B-11350
B-11360
B-11370
273
273
273
273
273
274
274
275
275
275
275
Figure
B-2123-1
259
254
ARTICLE B-1000
INTRODUCTION AND SCOPE
B-1100
INTRODUCTION
B-1110
OBJECTIVE
B-1120
B-1200
FORMAT
1 Applicable
255
ARTICLE B-2000
GENERIC REQUIREMENTS
B-2100
CERTIFIED DESIGN
SPECIFICATION
REQUIREMENTS
B-2110.5 Identification of Enforcement Authorities. The Design Specification should include identification of enforcement authorities at locations of component installation with whom Data Reports must be filed.
The information in this Article addresses those portions of the certified Design Specification which are
generic in nature and therefore applicable to the construction of all Section III items.
B-2110
B-2110.6 Filing. NCA-3256 provides the requirements for filing of the Design Specification.
B-2110.7 Review of Design Report. NCA-3260 provides the requirements for review of the Design Report.
GENERAL
B-2111
Classification
B-2110.2 Certification. NCA-3255 provides the requirements for certification of the Design Specification.
The required certification is not applicable to supplementary, regulatory, or operability requirements which are
outside of the scope of this Section.
B-2112
B-2110.3 Permanent Records. NCA-4134.17 provides the requirements for the continued maintenance
and retention location for permanent records.
B-2110.4 Handling, Storage, and Shipping. The
Design Specification should include any special mea256
B-2112.2
APPENDIX B
B-2112.3 Establishment of Component and Component Support Design and Service Limits
(a) For Class 1, MC, and CS components, and for
Class 2 and 3 piping and its supports, Design and
Service Loads should be specified and appropriate
Service Limits designated [NCA-2142(a)].
(b) For Class 2 and 3 components and supports,
other than piping and its supports, two options are
available as follows:
(1) Design and Service Loads may be specified
and appropriate Service Limits designated.
(2) Service Loadings are not required to be identified when the Design Pressure, Design Temperature,
and Design Mechanical Loads result in stresses that
are at least as high, relative to allowable values, as
any which may occur for any Service Loading [NCA2142(a)].
B-2122
B-2122.2
Design
Temperature.
NB /NC /ND /NE /NF /NG-3112 and NCA-2142.1(b)
provide the requirements for Design Temperature. The
Design Temperature shall be used in computations
involving the Design Pressure and coincidental Design
Mechanical Loads. The actual metal temperature at the
point under consideration shall be used in all computations where the use of the actual service pressure is
required. Where a component is heated by tracing,
induction coils, jacketing, or by internal heat generation,
the effect of such heating shall be incorporated in the
establishment of the Design Temperature.
B-2120
DESIGN
B-2121
Loadings
Design Loads
B-2113
B-2122.3
B-2123
B-2123
Service Loads
B-2126
B-2123.3 Service Limit D. Service Limit D is provided in order to evaluate the effect of plant operating
loads on the structural integrity of a component for
situations in which gross general deformations, loss
of dimensional stability, and damage requiring repair,
excluding loss of pressure retaining function, are not
objectionable. Since the occurrence of stress associated
with this Limit may require removal of the component
from service, the Owner should review the selection
of this Limit for compatibility with established system
safety criteria.
B-2124
Test Loads
B-2125
Load Combinations
B-2126
Deformation Limits
B-2123.2 Service Limit C. Service Limit C is provided in order to evaluate the effect of plant operating
loads on the structural integrity of a component for
situations which are not anticipated to occur for a
258
APPENDIX B
259
Fig. B-2123-1
B-2130
B-2130
MATERIALS
B-2131
General Requirements
fluid does not have deleterious effects and that the test
fluid may be safely used at the pressure and temperature
specified for the test.
B-2153
B-2154
B-2151
Pneumatic Test
OVERPRESSURE PROTECTION
B-2161
General Requirements
The Design Specification should identify if a pneumatic test should be used in lieu of hydrostatic testing
for those components and appurtenances required to
be pressure tested in accordance with the rules of this
Section (NB-6111, NB-6112, NE-6112).
B-2152
B-2160
B-2161.1 Scope. For steady state or transient conditions of pressure and coincident temperature that are
in excess of design or service loadings and their combinations and associated limits specified in the Design
Specifications, system overpressure protection is required for vessels, piping, pumps, and valves in service
and subjected to the consequences of the application
of these conditions (refer to NB /NC /ND-7110).
FABRICATION
TESTING
Additional Testing
Impact Tests
B-2150
Leak Tightness
Leak tightness requirements for areas, such as permanent seals, seats, and gasketed joints for pressure retaining components or appurtenances, should be included (NB-6215).
B-2140
B-2155
B-2132
B-2162
Restriction on Testing
B-2162
B-2163
B-2163
APPENDIX B
The Design Specification should identify the maximum anticipated pressure and coincident temperature
among any systems components under the operating
conditions of the system as a consequence of any
transients occurring either within the system or in
associated systems which may affect the system for
which overpressure protection is intended (refer to
NB /NC /ND-7300). Service conditions such as at startup
and shutdown may require protection against nonductile
failure [NB-3211(d)] at pressures lower than the component design pressure.
B-2164
B-2166
B-2200
OPERABILITY
B-2210
INTRODUCTION
B-2220
The Design Specification should indicate if the specified pump or valve must perform a mechanical motion
during the course of accomplishing a system safety
function during or following the specified plant event.
Such a pump or valve is designated as an active
component.
B-2165
B-2300
B-2300
REGULATORY
REQUIREMENTS
261
ARTICLE B-3000
SPECIFIC VESSEL REQUIREMENTS
B-3100
CERTIFIED DESIGN
SPECIFICATION
REQUIREMENTS
262
ARTICLE B-4000
SPECIFIC PUMP REQUIREMENTS
B-4100
B-4220
CERTIFIED DESIGN
SPECIFICATION
REQUIREMENTS
B-4110
GENERAL REQUIREMENTS
DESIGN
B-4121
B-4122
B-4210
GENERAL REQUIREMENTS
B-4211
Applicability
B-4231
Methods
Analysis
OPERABILITY REQUIREMENTS
FOR PUMPS
QUALIFICATION
B-4232
Earthquake Loadings
B-4200
B-4230
The method of pump qualification, if any, for functional operability should be defined in the Design
Specification. Qualification by analysis, test, or combinations thereof should be specified. Available codes or
standards which cover these areas should be referred
to and used to the maximum extent possible.
Covered by B-2110.
B-4120
DESIGN
B-4233
Testing
B-4240
B-4240
FUNCTIONAL OPERABILITY
PRODUCTION TESTS
Any special functional operability tests to be conducted on production pumps should be specified in the
Design Specification.
B-4250
DOCUMENTATION
B-4300
REGULATORY
REQUIREMENTS
264
B-4300
ARTICLE B-5000
SPECIFIC VALVE REQUIREMENTS
B-5100
CERTIFIED DESIGN
SPECIFICATION
REQUIREMENTS
B-5110
B-5122
B-5122.1 Alternative Rules. The Design Specification shall specify whether the alternative rules of NC3513 are permitted to be used.
GENERAL REQUIREMENTS
Covered by B-2110.
B-5120
DESIGN
B-5121
Class 1 Valves
Class 2 Valves
B-5123
Class 3 Valves
B-5123.1 Alternative Rules. The Design Specification shall specify whether the alternative rules of ND3513 are permitted to be used.
B-5200
OPERABILITY REQUIREMENTS
FOR VALVES
B-5210
INTRODUCTION
B-5220
DESIGN
B-5220
B-5230
QUALIFICATION
B-5231
Methods
B-5233
Testing
B-5240
The method of valve qualification, if any, for functional operability should be defined in the Design
Specification. Qualification by analysis, test, or combinations thereof should be specified. Available Codes or
Standards which cover these areas should be referenced
and used to the maximum extent possible.
FUNCTIONAL OPERABILITY
PRODUCTION TESTS
Any special functional operability tests to be conducted on production valves shall be specified in the
Design Specification.
B-5250
B-5232
B-5300
DOCUMENTATION
Documentation requirements for functional qualification or production tests or both should be specified in
the Design Specification.
Analysis
B-5300
REGULATORY
REQUIREMENTS
266
ARTICLE B-6000
SPECIFIC PIPING REQUIREMENTS
B-6100
CERTIFIED DESIGN
SPECIFICATION
REQUIREMENTS
B-6110
B-6122
Dynamic loadings, such as those resulting from sudden valve or pump operation, should be given. As a
minimum, the information needed to determine this
loading should be given (such as pressures, temperatures, flow rates, valve operating times).
GENERAL REQUIREMENTS
Covered by B-2110.
B-6123
B-6120
DESIGN
B-6121
Seismic
Peak Pressure
267
ARTICLE B-7000
SPECIFIC CONTAINMENT REQUIREMENTS
B-7100
B-7122
CERTIFIED DESIGN
SPECIFICATION
REQUIREMENTS
Design Temperature
B-7123
B-7110
GENERAL REQUIREMENTS
Covered by B-2110.
B-7120
DESIGN
B-7121
Design Pressure
B-7124
Service Conditions
NE-3113 provides the requirements concerning specification of Level A, B, C, and D Service Conditions
which satisfy the Generic Requirements for Service
Limits in NCA-2142.
268
ARTICLE B-8000
SPECIFIC COMPONENT SUPPORT
REQUIREMENTS
B-8100
CERTIFIED DESIGN
SPECIFICATION
REQUIREMENTS
DESIGN
B-8121
Standard Supports
B-8110
B-8120
B-8130
MATERIALS
GENERAL REQUIREMENTS
B-8300
REGULATORY
REQUIREMENTS
269
ARTICLE B-9000
SPECIFIC CORE SUPPORT STRUCTURES
REQUIREMENTS
B-9100
CERTIFIED DESIGN
SPECIFICATION
REQUIREMENTS
B-9110
B-9120
DESIGN
B-9121
Loading Conditions
GENERAL REQUIREMENTS
B-9122
Loading Combinations
B-9123
B-9123
APPENDIX B
Deformation Limits
B-9130
MATERIALS
B-9140
B-9124
B-9140
FABRICATION
271
ARTICLE B-10000
SPECIFIC PARTS AND MISCELLANEOUS ITEMS
REQUIREMENTS
B-10100
B-10112
CERTIFIED DESIGN
SPECIFICATION
REQUIREMENTS
B-10110
B-10113
GENERAL REQUIREMENTS
The following general requirements should be considered when preparing a Design Specification for parts
and miscellaneous items.
B-10111
Appurtenances
B-10114
Heater Elements
Parts
B-10115
The Design Specification for components or component supports should apply to the parts of such components or component supports (NCA-2131).
272
ARTICLE B-11000
REFERENCE LIST OF REGULATORY
REQUIREMENTS
B-11100
INTRODUCTION
B-11200
TITLE 10 OF CODE OF
FEDERAL REGULATIONS
B-11300
REGULATORY GUIDES
B-11310
DESIGN
1.1
1.2
1.11
1.13
1.14
1.26
1.27
B-11310
B-11330
1.29
1.115
1.46
1.117
1.48
1.120
1.122
1.52
1.124
1.130
1.57
1.59
1.60
1.61
1.63
Electric Penetration Assemblies in Containment Structures for Water-Cooled Nuclear Power Plants (Revision 2, 7 /78)
1.67
1.76
1.84
1.92
1.96
Design of Main Steam Isolation Valve Leakage Control Systems for Boiling Water
Reactor Nuclear Power Plants (Revision
1, 6 /76)
B-11320
MATERIALS
1.34
1.36
1.43
1.44
1.65
1.85
1.99
B-11330
EXAMINATION
1.58
1.102
1.65
1.106
1.83
274
B-11340
B-11340
APPENDIX B
FABRICATION
1.31
1.50
1.84
B-11350
INSTALLATION
Control of Stainless Steel Welding (Revision
1, 6 /73)
1.50
1.71
1.20
1.52
1.58
B-11370
TESTING
Comprehensive Vibration Assessment Program for Reactor Internals During Preoperational and Initial Startup Testing (Revision 2, 5 /76)
Design, Testing, and Maintenance Criteria
for Atmosphere Cleanup System Air Filtration and Adsorption Units of LightWater-Cooled Nuclear Power Plants (Revision 2, 3 /78)
Qualification of Nuclear Power Plant Inspection, Examination, and Testing Personnel
(8 /73)
1.37
1.38
1.54
1.58
1.64
Quality Assurance Requirements for the Design of Nuclear Power Plants (Revision
2, 6 /76)
1.74
1.88
1.1161
Quality Assurance Requirements for Installation, Inspection, and Testing of Mechanical Equipment and Systems (O-R,
5 /77)
1.1232
1 Excludes
2 Used
275
QUALITY ASSURANCE
1.28
1.31
B-11360
B-11370
Code components.