SAWIT-S TECHNOLOGY
(Solar and Wind Tracking System)
Bagas Pramana Putra Fadhila | Febriananda Wida Pramudita ll SMA Taruna Nusantara ll bagaspramana05@gmail.com
Abstract
Component of SAWIT-S
The purpose from this research to know solution for prepared energy in small scale which cheap,
renewable, and easy to use. This research focused on inovation technology for increase efficiency
solar cell and windmill and effort to combine solar cell and windmill. The advantages from this
research is to provide electricity without destruct the environtment in small scale so that fulfill the
needs of comunication and information technology of citizen in remote area.
The ways of working of SAWIT-S is finding angle where the the light come with the optimal angle
which can make SAWIT-S producing the maximal power but not make it overheated. Wind sensor
will spin so that kinetic energy from wind make SAWIT-S more effective which also produce
maximal energy every second. The result of this invention is (a) SAWIT-S can increase solar cell
efficiency in value of 20%-24%(b) SAWIT-S can track the position of sun light and the direction of
wind and optimize both and efficiency is gotten (c) The use of windmill can overcome the
weakness of solar cell which cant use at night (d) SAWIT-S can produce mini electricity power to
lit the LED lamp, charge phone battery and switch on GPS.
Explanation :
1. Main board
8. Wind sensor
2. Longitudinal Sensor 9. Transit Board
3. Main Pole
10. Arduino
4. Puller Wire
5. Servo
6. Bottom Box
7. Windmill
Introduction
Experiment
Situation in
Remote Area
Need
140
120
100
80
60
40
20
0
8
10
12 13 14 15 16 17
Time ...
SAWIT-S produce the voltage which almost same with the voltage
that produced without SAWIT-S
11
11
normal
1,8
0,4
1,6
0,3
1,4
0,2
Power (W)
Power(Watt)
10
0,5
0,1
0
-0,1
SAWIT-S
normal
0,6
SOLAR CELL
normal
4,5
4,4
4,3
4,2
4,1
4
3,9
3,8
8
12 13 14 15 16 17
Time ...
SAWIT-S Technology can optimize the absorption of energy
compared with normal mode(without SAWIT-S)
Research Methods
SAWIT-S
Voltage Comparation
SAWIT-S
normal
Voltage (V)
Blue Energy +
optimalizer
10
11
12
13
14
15
16
17
1,2
1
0,8
0,6
0,4
0,2
0
-0,2
Time ...
SAWIT-S can increase the output power from the solar cell compared
with normal mode.
WINDMILL
Sensor
Main Control
Tracking
1. SAWIT-S technology is the first technology with the function of 'tracking' which gained optimum
energy from sunlight, and also keep track of the position where the prevailing winds could produce
optimal energy.
BASIC CONCEPT
2. SAWIT-S technology can improve solar cell efficiency reached 20% -24% and make windmills to
produce energy optimally.
Charger
Controller
Battery
Load
Refrences
1. Nugraha, Tutun. 2012. Seri Sains Energi Terbaharukan: Energi Surya, Jakarta: PT Pelangi Ilmu Nusantara.
4. http://www.esdm.go.id/berita/artikel/56-artikel/4034-solar-cell-sumber-energi-terbarukanmasa-depan-.html
5. http://www.vedcmalang.com/pppptkboemlg/index.php/artikel-coba-2/listrik-electro/ 1038-herry-sudjendro
7. Yuwono, Budi. 2005. Skripsi Optimalisasi Panel Sel Surya Dengan Menggunakan Sistem Pelacak Berbasis Mikrokontroler AT89C51. Surakarta: Universitas
Sebelas Maret Surakarta.
8. Anonim, TT. Modul Pelatihan Arduino Uno. Yogyakarta: Jurusan Teknik Elektro dan Teknik Informatika UGM
9. Kadafi Husin, Ahmad. 2012.Robot Line Follower Analog SederhanaLampung: Jurusan Teknik Informatika Perguruan Tinggi Teknokrat.
11. Konka Prasad, Hari. 2010. Characterization Of Composite Piezoelectric Materials For Smart Joint Applications. India: Lousiana State University.
12. Kanginan, Marthen. 2012. Konsep Dasar Lengkap Olimpiade Sains Nasional Fisika untuk SMP. Bandung: Yrama Widya
Abstract
Component of SAWIT-S
The purpose from this research to know solution for prepared energy in small scale which cheap,
renewable, and easy to use. This research focused on inovation technology for increase efficiency
solar cell and windmill and effort to combine solar cell and windmill. The advantages from this
research is to provide electricity without destruct the environtment in small scale so that fulfill the
needs of comunication and information technology of citizen in remote area.
The ways of working of SAWIT-S is finding angle where the the light come with the optimal angle
which can make SAWIT-S producing the maximal power but not make it overheated. Wind sensor
will spin so that kinetic energy from wind make SAWIT-S more effective which also produce
maximal energy every second. The result of this invention is (a) SAWIT-S can increase solar cell
efficiency in value of 20%-24%(b) SAWIT-S can track the position of sun light and the direction of
wind and optimize both and efficiency is gotten (c) The use of windmill can overcome the
weakness of solar cell which cant use at night (d) SAWIT-S can produce mini electricity power to
lit the LED lamp, charge phone battery and switch on GPS.
Explanation :
1. Main board
8. Wind sensor
2. Longitudinal Sensor 9. Transit Board
3. Main Pole
10. Arduino
4. Puller Wire
5. Servo
6. Bottom Box
7. Windmill
Introduction
Experiment
Situation in
Remote Area
Need
140
120
100
80
60
40
20
0
8
10
11
normal
4,5
4,4
4,3
4,2
4,1
4
3,9
3,8
8
12 13 14 15 16 17
Time ...
SAWIT-S Technology can optimize the absorption of energy
compared with normal mode(without SAWIT-S)
Research Methods
SAWIT-S
Voltage Comparation
SAWIT-S
normal
Voltage (V)
Blue Energy +
optimalizer
10
11
12 13
Time ...
14
15
16
17
SAWIT-S produce the voltage which almost same with the voltage
that produced without SAWIT-S
SAWIT-S
normal
0,6
normal
1,8
0,4
1,6
0,3
1,2
1,4
Power (W)
Power(Watt)
SOLAR CELL
0,5
0,2
0,1
0,8
0,6
0,4
0
-0,1
10
11
12
13
14
15
16
17
0,2
0
-0,2
Time ...
SAWIT-S can increase the output power from the solar cell compared
with normal mode.
WINDMILL
Sensor
Main Control
1.
Tracking
2.
BASIC CONCEPT
Display
Charger
Controller
Load
Battery
1. SAWIT-S technology is the first technology with the function of 'tracking' which gained optimum
energy from sunlight, and also keep track of the position where the prevailing winds could produce
optimal energy.
2. SAWIT-S technology can improve solar cell efficiency reached 20% -24% and make windmills to
produce energy optimally.
LONGITUDINAL
SERVO AND
ROTATOR
1. Nugraha, Tutun. 2012. Seri Sains Energi Terbaharukan: Energi Surya, Jakarta: PT Pelangi Ilmu Nusantara.
4. http://www.esdm.go.id/berita/artikel/56-artikel/4034-solar-cell-sumber-energi-terbarukanmasa-depan-.html
5. http://www.vedcmalang.com/pppptkboemlg/index.php/artikel-coba-2/listrik-electro/ 1038-herry-sudjendro
7. Yuwono, Budi. 2005. Skripsi Optimalisasi Panel Sel Surya Dengan Menggunakan Sistem Pelacak Berbasis Mikrokontroler AT89C51. Surakarta: Universitas
Sebelas Maret Surakarta.
8. Anonim, TT. Modul Pelatihan Arduino Uno. Yogyakarta: Jurusan Teknik Elektro dan Teknik Informatika UGM
9. Kadafi Husin, Ahmad. 2012.Robot Line Follower Analog SederhanaLampung: Jurusan Teknik Informatika Perguruan Tinggi Teknokrat.
11. Konka Prasad, Hari. 2010. Characterization Of Composite Piezoelectric Materials For Smart Joint Applications. India: Lousiana State University.
12. Kanginan, Marthen. 2012. Konsep Dasar Lengkap Olimpiade Sains Nasional Fisika untuk SMP. Bandung: Yrama Widya