Anda di halaman 1dari 3

Eddie S.

Soriano

OBJECTIVE : To secure challenging entry level position with a dynamic organization, this will enable me to apply my skills, experience
and creativity to the benefit of the organization to contribute my knowledge and skills.

Position Applied : Welder


Work Experienced:
Company:
Address:
Arabia

Zamil Steel Industries


Structural Steel Division ( SSD ) P.O Box 877 Dammam 31421 Saudi
Phone no. 847-1840 , Fax no. 847-1291 , Telex : 801414

Position:

Fcaw Welder

Date:

Oct 27, 2010 Up to Present Oct 27, 2012

Duties and Responsibilities (Job Description)


o
o
o
o
o
o
o
o
o
o

Welding all types of Post , Beams and Plates thickness from 3mm to 90mm
1.6mm filler wire are using and CO2 for gas for all FCAW welding.
We used 32-44 CFH rate flow gauge for Co2 gas based on Welding Procedure
Specification (WPS )
Preheating are also applied for beam and plate when cold weather depend on thickness
of beams
We are have types of welding size such as 6mm , 8-10mm , 12mm , 14mm till 32mm or
more for fillet weld.
Oxy Acetylene cutting for plate when revised the design before welding.
gauging for Ultra Test (U.T) full penetration
Radiographic Test (RT) or XRAY for specific request by customers
Basic blueprint reading based on design we welding.
Some Customer of Zamil Steel are : Saudi Aramco , Jubail Export Refinery , Hyundai
Industries,
Abudabi Refinery. Riyad Refinery , GASCCO, Abu Dhabi Gas Dev Co. Limited, JGC
Terminal JV
Maaden Mine and Rifenery Project, Saipem S.p.A , Yanbu Export Refinery Project and
many more.

Company: Yutaka Philippines Inc.


Address:
Binan Laguna. Philippines
Position:
Mig Welder
Date:
May 5, 2010 Oct 22, 2010
Duties and Responsibilities (Job Description)
o
o
o
o

Welding of Muffler for Honda Barako and Wave 125 Motors


We used 1.0mm filler wire
We used Co2 or Argon for Mig welding.
Quality Control personnel are strict to inspect the quality of muffler we weld.

o
o
o

If require to repair some muffler due to poor quality welding we repair for good quality
weld.
Before we start to work our team Team Leader remind us for safety precaution
I also check the materials and equipment I used before I begin to work for safety.

Company: Topaz Marine Engineering


Address: Dubai, United Arab Emirates
Position: Smaw Welder
Date:
Aug 26, 2007 Mar 03, 2010
Duties and Responsibilities (Job Description)
o
o
o
o
o
o
o

Ship repair welding using Smaw we weld from bottom plate, side shield, diesel tank
Water tank , star
Hole where the storage of materials are stored we repaired and modified.
Compartment where divided the rooms we repaired
Most of the repaired from ship as per customers request
The Supervisor is the one who assign us from different part of the ship as per authorize to
work
Our Companys most customers in Dubai are U.S Navy Ship where the military is our security
strict guidelines should follow one place to another military has supervision.
Welding electrode we should are 6010-6011-6013 for rooting and 7018 for hot pass and
capping
from 2.4mm to 3.2mm electrode.
Company: Toyota Auto Parts Philippines
Address: Brgy. Pulong Sta. Rosa Laguna
Position:
Date:

Mig Welder
Apr 23, 2007 Aug 27, 2007

Duties and Responsibilities (Job Description)


o
o
o
o
o

We weld fabricated pallet


We used mild steel
1.2mm filler wire
Argon and Co2 gas we used
I report to the team leader the production I finished

Company: F-Tech Philippines Inc.


Address: Binan Laguna Philippines
Position:

Mig Welder

Date :

Jul 07, 2006 - Dec 07, 2006

Duties and Responsibilities (Job Description)

o
o

Welding fabricated Pedal


Using 1.2mm filler wire for Mig welding

Company: Masuda Philippines Inc.


Address: Binan Laguna Philippines
Position:
Date:

Welder
Mar 25, 2004 Jun 30, 2006

Duties and Responsibilities (Job Description)


o
o
o
o
o

Welding Honda Big Bike Motor exported to Europe


Welding under chassis of Big Bike
Using 0.9mm filler wire for Mig welding
Welding muffler under supervision of Quality Control personnel
Strict quality welding are implemented for Big Bike to maintain brand name HONDA
Tools and Equipment Used:
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o

Electric Driver Drill wired or cordless


Electric 5 Grinder
Jigsaw
Table Disc Cutter
Oxy Acetylene
Delta Weld 302 Miller for Mig and Fcaw Welding
CP-302 MigRunner for Mig and Fcaw Welding
Yamato 500 for Stick Welding
Daiken 500 for Stick Welding
PowerCraft 300 for Stick Welding
Lincoln for Stick Welding
Wrench
C - clamp
Adjustable
Rivets
Power Tools
Hand Tools
Overhead Crane
Air grinder
Etc..

I hereby certify that the facts contained in this resume are true and correct to the best of my knowledge.

Eddie S. Soriano
Applicant

Anda mungkin juga menyukai